| /* |
| * QEMU PCI bus manager |
| * |
| * Copyright (c) 2004 Fabrice Bellard |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a copy |
| * of this software and associated documentation files (the "Software"), to deal |
| * in the Software without restriction, including without limitation the rights |
| * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell |
| * copies of the Software, and to permit persons to whom the Software is |
| * furnished to do so, subject to the following conditions: |
| * |
| * The above copyright notice and this permission notice shall be included in |
| * all copies or substantial portions of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL |
| * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER |
| * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, |
| * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN |
| * THE SOFTWARE. |
| */ |
| #include "cpu.h" |
| #include "hw/hw.h" |
| #include "hw/pci/pci.h" |
| #include "monitor/monitor.h" |
| #include "net/net.h" |
| #include "sysemu/sysemu.h" |
| |
| //#define DEBUG_PCI |
| |
| struct PCIBus { |
| BusState qbus; |
| int bus_num; |
| int devfn_min; |
| pci_set_irq_fn set_irq; |
| pci_map_irq_fn map_irq; |
| uint32_t config_reg; /* XXX: suppress */ |
| /* low level pic */ |
| SetIRQFunc *low_set_irq; |
| qemu_irq *irq_opaque; |
| PCIDevice *devices[256]; |
| PCIDevice *parent_dev; |
| PCIBus *next; |
| /* The bus IRQ state is the logical OR of the connected devices. |
| Keep a count of the number of devices with raised IRQs. */ |
| int nirq; |
| int irq_count[]; |
| }; |
| |
| static void pci_update_mappings(PCIDevice *d); |
| static void pci_set_irq(void *opaque, int irq_num, int level); |
| |
| hwaddr pci_mem_base; |
| static uint16_t pci_default_sub_vendor_id = PCI_SUBVENDOR_ID_REDHAT_QUMRANET; |
| static uint16_t pci_default_sub_device_id = PCI_SUBDEVICE_ID_QEMU; |
| static PCIBus *first_bus; |
| |
| static void pcibus_save(QEMUFile *f, void *opaque) |
| { |
| PCIBus *bus = (PCIBus *)opaque; |
| int i; |
| |
| qemu_put_be32(f, bus->nirq); |
| for (i = 0; i < bus->nirq; i++) |
| qemu_put_be32(f, bus->irq_count[i]); |
| } |
| |
| static int pcibus_load(QEMUFile *f, void *opaque, int version_id) |
| { |
| PCIBus *bus = (PCIBus *)opaque; |
| int i, nirq; |
| |
| if (version_id != 1) |
| return -EINVAL; |
| |
| nirq = qemu_get_be32(f); |
| if (bus->nirq != nirq) { |
| fprintf(stderr, "pcibus_load: nirq mismatch: src=%d dst=%d\n", |
| nirq, bus->nirq); |
| return -EINVAL; |
| } |
| |
| for (i = 0; i < nirq; i++) |
| bus->irq_count[i] = qemu_get_be32(f); |
| |
| return 0; |
| } |
| |
| PCIBus *pci_register_bus(DeviceState *parent, const char *name, |
| pci_set_irq_fn set_irq, pci_map_irq_fn map_irq, |
| qemu_irq *pic, int devfn_min, int nirq) |
| { |
| PCIBus *bus; |
| static int nbus = 0; |
| |
| bus = FROM_QBUS(PCIBus, qbus_create(BUS_TYPE_PCI, |
| sizeof(PCIBus) + (nirq * sizeof(int)), |
| parent, name)); |
| bus->set_irq = set_irq; |
| bus->map_irq = map_irq; |
| bus->irq_opaque = pic; |
| bus->devfn_min = devfn_min; |
| bus->nirq = nirq; |
| bus->next = first_bus; |
| first_bus = bus; |
| register_savevm(NULL, "PCIBUS", nbus++, 1, pcibus_save, pcibus_load, bus); |
| return bus; |
| } |
| |
| static PCIBus *pci_register_secondary_bus(PCIDevice *dev, pci_map_irq_fn map_irq) |
| { |
| PCIBus *bus; |
| bus = g_malloc0(sizeof(PCIBus)); |
| bus->map_irq = map_irq; |
| bus->parent_dev = dev; |
| bus->next = dev->bus->next; |
| dev->bus->next = bus; |
| return bus; |
| } |
| |
| int pci_bus_num(PCIBus *s) |
| { |
| return s->bus_num; |
| } |
| |
| void pci_device_save(PCIDevice *s, QEMUFile *f) |
| { |
| int i; |
| |
| qemu_put_be32(f, 2); /* PCI device version */ |
| qemu_put_buffer(f, s->config, 256); |
| for (i = 0; i < 4; i++) |
| qemu_put_be32(f, s->irq_state[i]); |
| } |
| |
| int pci_device_load(PCIDevice *s, QEMUFile *f) |
| { |
| uint32_t version_id; |
| int i; |
| |
| version_id = qemu_get_be32(f); |
| if (version_id > 2) |
| return -EINVAL; |
| qemu_get_buffer(f, s->config, 256); |
| pci_update_mappings(s); |
| |
| if (version_id >= 2) |
| for (i = 0; i < 4; i ++) |
| s->irq_state[i] = qemu_get_be32(f); |
| |
| return 0; |
| } |
| |
| static int pci_set_default_subsystem_id(PCIDevice *pci_dev) |
| { |
| uint16_t *id; |
| |
| id = (void*)(&pci_dev->config[PCI_SUBVENDOR_ID]); |
| id[0] = cpu_to_le16(pci_default_sub_vendor_id); |
| id[1] = cpu_to_le16(pci_default_sub_device_id); |
| return 0; |
| } |
| |
| /* |
| * Parse [[<domain>:]<bus>:]<slot>, return -1 on error |
| */ |
| static int pci_parse_devaddr(const char *addr, int *domp, int *busp, unsigned *slotp) |
| { |
| const char *p; |
| char *e; |
| unsigned long val; |
| unsigned long dom = 0, bus = 0; |
| unsigned slot = 0; |
| |
| p = addr; |
| val = strtoul(p, &e, 16); |
| if (e == p) |
| return -1; |
| if (*e == ':') { |
| bus = val; |
| p = e + 1; |
| val = strtoul(p, &e, 16); |
| if (e == p) |
| return -1; |
| if (*e == ':') { |
| dom = bus; |
| bus = val; |
| p = e + 1; |
| val = strtoul(p, &e, 16); |
| if (e == p) |
| return -1; |
| } |
| } |
| |
| if (dom > 0xffff || bus > 0xff || val > 0x1f) |
| return -1; |
| |
| slot = val; |
| |
| if (*e) |
| return -1; |
| |
| /* Note: QEMU doesn't implement domains other than 0 */ |
| if (dom != 0 || pci_find_bus(bus) == NULL) |
| return -1; |
| |
| *domp = dom; |
| *busp = bus; |
| *slotp = slot; |
| return 0; |
| } |
| |
| int pci_read_devaddr(const char *addr, int *domp, int *busp, unsigned *slotp) |
| { |
| char devaddr[32]; |
| |
| if (!get_param_value(devaddr, sizeof(devaddr), "pci_addr", addr)) |
| return -1; |
| |
| return pci_parse_devaddr(devaddr, domp, busp, slotp); |
| } |
| |
| int pci_assign_devaddr(const char *addr, int *domp, int *busp, unsigned *slotp) |
| { |
| char devaddr[32]; |
| |
| if (!get_param_value(devaddr, sizeof(devaddr), "pci_addr", addr)) |
| return -1; |
| |
| if (!strcmp(devaddr, "auto")) { |
| *domp = *busp = 0; |
| *slotp = -1; |
| /* want to support dom/bus auto-assign at some point */ |
| return 0; |
| } |
| |
| return pci_parse_devaddr(devaddr, domp, busp, slotp); |
| } |
| |
| /* -1 for devfn means auto assign */ |
| static PCIDevice *do_pci_register_device(PCIDevice *pci_dev, PCIBus *bus, |
| const char *name, int devfn, |
| PCIConfigReadFunc *config_read, |
| PCIConfigWriteFunc *config_write) |
| { |
| if (devfn < 0) { |
| for(devfn = bus->devfn_min ; devfn < 256; devfn += 8) { |
| if (!bus->devices[devfn]) |
| goto found; |
| } |
| return NULL; |
| found: ; |
| } |
| pci_dev->bus = bus; |
| pci_dev->devfn = devfn; |
| pstrcpy(pci_dev->name, sizeof(pci_dev->name), name); |
| memset(pci_dev->irq_state, 0, sizeof(pci_dev->irq_state)); |
| pci_set_default_subsystem_id(pci_dev); |
| |
| if (!config_read) |
| config_read = pci_default_read_config; |
| if (!config_write) |
| config_write = pci_default_write_config; |
| pci_dev->config_read = config_read; |
| pci_dev->config_write = config_write; |
| bus->devices[devfn] = pci_dev; |
| pci_dev->irq = qemu_allocate_irqs(pci_set_irq, pci_dev, 4); |
| return pci_dev; |
| } |
| |
| PCIDevice *pci_register_device(PCIBus *bus, const char *name, |
| int instance_size, int devfn, |
| PCIConfigReadFunc *config_read, |
| PCIConfigWriteFunc *config_write) |
| { |
| PCIDevice *pci_dev; |
| |
| pci_dev = g_malloc0(instance_size); |
| pci_dev = do_pci_register_device(pci_dev, bus, name, devfn, |
| config_read, config_write); |
| return pci_dev; |
| } |
| static hwaddr pci_to_cpu_addr(hwaddr addr) |
| { |
| return addr + pci_mem_base; |
| } |
| |
| static void pci_unregister_io_regions(PCIDevice *pci_dev) |
| { |
| PCIIORegion *r; |
| int i; |
| |
| for(i = 0; i < PCI_NUM_REGIONS; i++) { |
| r = &pci_dev->io_regions[i]; |
| if (!r->size || r->addr == -1) |
| continue; |
| if (r->type == PCI_ADDRESS_SPACE_IO) { |
| isa_unassign_ioport(r->addr, r->size); |
| } else { |
| cpu_register_physical_memory(pci_to_cpu_addr(r->addr), |
| r->size, |
| IO_MEM_UNASSIGNED); |
| } |
| } |
| } |
| |
| int pci_unregister_device(PCIDevice *pci_dev) |
| { |
| int ret = 0; |
| |
| if (pci_dev->unregister) |
| ret = pci_dev->unregister(pci_dev); |
| if (ret) |
| return ret; |
| |
| pci_unregister_io_regions(pci_dev); |
| |
| qemu_free_irqs(pci_dev->irq); |
| pci_dev->bus->devices[pci_dev->devfn] = NULL; |
| qdev_free(&pci_dev->qdev); |
| return 0; |
| } |
| |
| void pci_register_bar(PCIDevice *pci_dev, int region_num, |
| uint32_t size, int type, |
| PCIMapIORegionFunc *map_func) |
| { |
| PCIIORegion *r; |
| uint32_t addr; |
| |
| if ((unsigned int)region_num >= PCI_NUM_REGIONS) |
| return; |
| |
| if (size & (size-1)) { |
| fprintf(stderr, "ERROR: PCI region size must be pow2 " |
| "type=0x%x, size=0x%x\n", type, size); |
| exit(1); |
| } |
| |
| r = &pci_dev->io_regions[region_num]; |
| r->addr = -1; |
| r->size = size; |
| r->type = type; |
| r->map_func = map_func; |
| if (region_num == PCI_ROM_SLOT) { |
| addr = 0x30; |
| } else { |
| addr = 0x10 + region_num * 4; |
| } |
| pci_set_long(pci_dev->config + addr, type); |
| } |
| |
| static void pci_update_mappings(PCIDevice *d) |
| { |
| PCIIORegion *r; |
| int cmd, i; |
| uint32_t last_addr, new_addr, config_ofs; |
| |
| cmd = pci_get_word(d->config + PCI_COMMAND); |
| for(i = 0; i < PCI_NUM_REGIONS; i++) { |
| r = &d->io_regions[i]; |
| if (i == PCI_ROM_SLOT) { |
| config_ofs = 0x30; |
| } else { |
| config_ofs = 0x10 + i * 4; |
| } |
| if (r->size != 0) { |
| if (r->type & PCI_ADDRESS_SPACE_IO) { |
| if (cmd & PCI_COMMAND_IO) { |
| new_addr = pci_get_long(d->config + config_ofs); |
| new_addr = new_addr & ~(r->size - 1); |
| last_addr = new_addr + r->size - 1; |
| /* NOTE: we have only 64K ioports on PC */ |
| if (last_addr <= new_addr || new_addr == 0 || |
| last_addr >= 0x10000) { |
| new_addr = -1; |
| } |
| } else { |
| new_addr = -1; |
| } |
| } else { |
| if (cmd & PCI_COMMAND_MEMORY) { |
| new_addr = pci_get_long(d->config + config_ofs); |
| /* the ROM slot has a specific enable bit */ |
| if (i == PCI_ROM_SLOT && !(new_addr & 1)) |
| goto no_mem_map; |
| new_addr = new_addr & ~(r->size - 1); |
| last_addr = new_addr + r->size - 1; |
| /* NOTE: we do not support wrapping */ |
| /* XXX: as we cannot support really dynamic |
| mappings, we handle specific values as invalid |
| mappings. */ |
| if (last_addr <= new_addr || new_addr == 0 || |
| last_addr == -1) { |
| new_addr = -1; |
| } |
| } else { |
| no_mem_map: |
| new_addr = -1; |
| } |
| } |
| /* now do the real mapping */ |
| if (new_addr != r->addr) { |
| if (r->addr != -1) { |
| if (r->type & PCI_ADDRESS_SPACE_IO) { |
| int class; |
| /* NOTE: specific hack for IDE in PC case: |
| only one byte must be mapped. */ |
| class = d->config[0x0a] | (d->config[0x0b] << 8); |
| if (class == 0x0101 && r->size == 4) { |
| isa_unassign_ioport(r->addr + 2, 1); |
| } else { |
| isa_unassign_ioport(r->addr, r->size); |
| } |
| } else { |
| cpu_register_physical_memory(pci_to_cpu_addr(r->addr), |
| r->size, |
| IO_MEM_UNASSIGNED); |
| qemu_unregister_coalesced_mmio(r->addr, r->size); |
| } |
| } |
| r->addr = new_addr; |
| if (r->addr != -1) { |
| r->map_func(d, i, r->addr, r->size, r->type); |
| } |
| } |
| } |
| } |
| } |
| |
| uint32_t pci_default_read_config(PCIDevice *d, |
| uint32_t address, int len) |
| { |
| uint32_t val; |
| |
| switch(len) { |
| default: |
| case 4: |
| if (address <= 0xfc) { |
| val = pci_get_long(d->config + address); |
| break; |
| } |
| /* fall through */ |
| case 2: |
| if (address <= 0xfe) { |
| val = pci_get_word(d->config + address); |
| break; |
| } |
| /* fall through */ |
| case 1: |
| val = d->config[address]; |
| break; |
| } |
| return val; |
| } |
| |
| void pci_default_write_config(PCIDevice *d, |
| uint32_t address, uint32_t val, int len) |
| { |
| int can_write, i; |
| uint32_t end, addr; |
| |
| if (len == 4 && ((address >= 0x10 && address < 0x10 + 4 * 6) || |
| (address >= 0x30 && address < 0x34))) { |
| PCIIORegion *r; |
| int reg; |
| |
| if ( address >= 0x30 ) { |
| reg = PCI_ROM_SLOT; |
| }else{ |
| reg = (address - 0x10) >> 2; |
| } |
| r = &d->io_regions[reg]; |
| if (r->size == 0) |
| goto default_config; |
| /* compute the stored value */ |
| if (reg == PCI_ROM_SLOT) { |
| /* keep ROM enable bit */ |
| val &= (~(r->size - 1)) | 1; |
| } else { |
| val &= ~(r->size - 1); |
| val |= r->type; |
| } |
| pci_set_long(d->config + address, val); |
| pci_update_mappings(d); |
| return; |
| } |
| default_config: |
| /* not efficient, but simple */ |
| addr = address; |
| for(i = 0; i < len; i++) { |
| /* default read/write accesses */ |
| switch(d->config[0x0e]) { |
| case 0x00: |
| case 0x80: |
| switch(addr) { |
| case 0x00: |
| case 0x01: |
| case 0x02: |
| case 0x03: |
| case 0x06: |
| case 0x07: |
| case 0x08: |
| case 0x09: |
| case 0x0a: |
| case 0x0b: |
| case 0x0e: |
| case 0x10 ... 0x27: /* base */ |
| case 0x2c ... 0x2f: /* read-only subsystem ID & vendor ID */ |
| case 0x30 ... 0x33: /* rom */ |
| case 0x3d: |
| can_write = 0; |
| break; |
| default: |
| can_write = 1; |
| break; |
| } |
| break; |
| default: |
| case 0x01: |
| switch(addr) { |
| case 0x00: |
| case 0x01: |
| case 0x02: |
| case 0x03: |
| case 0x06: |
| case 0x07: |
| case 0x08: |
| case 0x09: |
| case 0x0a: |
| case 0x0b: |
| case 0x0e: |
| case 0x2c ... 0x2f: /* read-only subsystem ID & vendor ID */ |
| case 0x38 ... 0x3b: /* rom */ |
| case 0x3d: |
| can_write = 0; |
| break; |
| default: |
| can_write = 1; |
| break; |
| } |
| break; |
| } |
| if (can_write) { |
| /* Mask out writes to reserved bits in registers */ |
| switch (addr) { |
| case 0x05: |
| val &= ~PCI_COMMAND_RESERVED_MASK_HI; |
| break; |
| case 0x06: |
| val &= ~PCI_STATUS_RESERVED_MASK_LO; |
| break; |
| case 0x07: |
| val &= ~PCI_STATUS_RESERVED_MASK_HI; |
| break; |
| } |
| d->config[addr] = val; |
| } |
| if (++addr > 0xff) |
| break; |
| val >>= 8; |
| } |
| |
| end = address + len; |
| if (end > PCI_COMMAND && address < (PCI_COMMAND + 2)) { |
| /* if the command register is modified, we must modify the mappings */ |
| pci_update_mappings(d); |
| } |
| } |
| |
| void pci_data_write(void *opaque, uint32_t addr, uint32_t val, int len) |
| { |
| PCIBus *s = opaque; |
| PCIDevice *pci_dev; |
| int config_addr, bus_num; |
| |
| #if defined(DEBUG_PCI) && 0 |
| printf("pci_data_write: addr=%08x val=%08x len=%d\n", |
| addr, val, len); |
| #endif |
| bus_num = (addr >> 16) & 0xff; |
| while (s && s->bus_num != bus_num) |
| s = s->next; |
| if (!s) |
| return; |
| pci_dev = s->devices[(addr >> 8) & 0xff]; |
| if (!pci_dev) |
| return; |
| config_addr = addr & 0xff; |
| #if defined(DEBUG_PCI) |
| printf("pci_config_write: %s: addr=%02x val=%08x len=%d\n", |
| pci_dev->name, config_addr, val, len); |
| #endif |
| pci_dev->config_write(pci_dev, config_addr, val, len); |
| } |
| |
| uint32_t pci_data_read(void *opaque, uint32_t addr, int len) |
| { |
| PCIBus *s = opaque; |
| PCIDevice *pci_dev; |
| int config_addr, bus_num; |
| uint32_t val; |
| |
| bus_num = (addr >> 16) & 0xff; |
| while (s && s->bus_num != bus_num) |
| s= s->next; |
| if (!s) |
| goto fail; |
| pci_dev = s->devices[(addr >> 8) & 0xff]; |
| if (!pci_dev) { |
| fail: |
| switch(len) { |
| case 1: |
| val = 0xff; |
| break; |
| case 2: |
| val = 0xffff; |
| break; |
| default: |
| case 4: |
| val = 0xffffffff; |
| break; |
| } |
| goto the_end; |
| } |
| config_addr = addr & 0xff; |
| val = pci_dev->config_read(pci_dev, config_addr, len); |
| #if defined(DEBUG_PCI) |
| printf("pci_config_read: %s: addr=%02x val=%08x len=%d\n", |
| pci_dev->name, config_addr, val, len); |
| #endif |
| the_end: |
| #if defined(DEBUG_PCI) && 0 |
| printf("pci_data_read: addr=%08x val=%08x len=%d\n", |
| addr, val, len); |
| #endif |
| return val; |
| } |
| |
| /***********************************************************/ |
| /* generic PCI irq support */ |
| |
| /* 0 <= irq_num <= 3. level must be 0 or 1 */ |
| static void pci_set_irq(void *opaque, int irq_num, int level) |
| { |
| PCIDevice *pci_dev = (PCIDevice *)opaque; |
| PCIBus *bus; |
| int change; |
| |
| change = level - pci_dev->irq_state[irq_num]; |
| if (!change) |
| return; |
| |
| pci_dev->irq_state[irq_num] = level; |
| for (;;) { |
| bus = pci_dev->bus; |
| irq_num = bus->map_irq(pci_dev, irq_num); |
| if (bus->set_irq) |
| break; |
| pci_dev = bus->parent_dev; |
| } |
| bus->irq_count[irq_num] += change; |
| bus->set_irq(bus->irq_opaque, irq_num, bus->irq_count[irq_num] != 0); |
| } |
| |
| /***********************************************************/ |
| /* monitor info on PCI */ |
| |
| typedef struct { |
| uint16_t class; |
| const char *desc; |
| } pci_class_desc; |
| |
| static const pci_class_desc pci_class_descriptions[] = |
| { |
| { 0x0100, "SCSI controller"}, |
| { 0x0101, "IDE controller"}, |
| { 0x0102, "Floppy controller"}, |
| { 0x0103, "IPI controller"}, |
| { 0x0104, "RAID controller"}, |
| { 0x0106, "SATA controller"}, |
| { 0x0107, "SAS controller"}, |
| { 0x0180, "Storage controller"}, |
| { 0x0200, "Ethernet controller"}, |
| { 0x0201, "Token Ring controller"}, |
| { 0x0202, "FDDI controller"}, |
| { 0x0203, "ATM controller"}, |
| { 0x0280, "Network controller"}, |
| { 0x0300, "VGA controller"}, |
| { 0x0301, "XGA controller"}, |
| { 0x0302, "3D controller"}, |
| { 0x0380, "Display controller"}, |
| { 0x0400, "Video controller"}, |
| { 0x0401, "Audio controller"}, |
| { 0x0402, "Phone"}, |
| { 0x0480, "Multimedia controller"}, |
| { 0x0500, "RAM controller"}, |
| { 0x0501, "Flash controller"}, |
| { 0x0580, "Memory controller"}, |
| { 0x0600, "Host bridge"}, |
| { 0x0601, "ISA bridge"}, |
| { 0x0602, "EISA bridge"}, |
| { 0x0603, "MC bridge"}, |
| { 0x0604, "PCI bridge"}, |
| { 0x0605, "PCMCIA bridge"}, |
| { 0x0606, "NUBUS bridge"}, |
| { 0x0607, "CARDBUS bridge"}, |
| { 0x0608, "RACEWAY bridge"}, |
| { 0x0680, "Bridge"}, |
| { 0x0c03, "USB controller"}, |
| { 0, NULL} |
| }; |
| |
| static void pci_info_device(PCIDevice *d) |
| { |
| Monitor *mon = cur_mon; |
| int i, class; |
| PCIIORegion *r; |
| const pci_class_desc *desc; |
| |
| typedef union { |
| uint16_t* ptr16; |
| void* ptr; |
| } u16; |
| |
| monitor_printf(mon, " Bus %2d, device %3d, function %d:\n", |
| d->bus->bus_num, d->devfn >> 3, d->devfn & 7); |
| class = pci_get_word(d->config + PCI_CLASS_DEVICE); |
| monitor_printf(mon, " "); |
| desc = pci_class_descriptions; |
| while (desc->desc && class != desc->class) |
| desc++; |
| if (desc->desc) { |
| monitor_printf(mon, "%s", desc->desc); |
| } else { |
| monitor_printf(mon, "Class %04x", class); |
| } |
| u16 vendor_id = { .ptr = d->config + PCI_VENDOR_ID }; |
| u16 device_id = { .ptr = d->config + PCI_DEVICE_ID }; |
| |
| monitor_printf(mon, ": PCI device %04x:%04x\n", |
| le16_to_cpu(*vendor_id.ptr16), |
| le16_to_cpu(*device_id.ptr16)); |
| |
| if (d->config[PCI_INTERRUPT_PIN] != 0) { |
| monitor_printf(mon, " IRQ %d.\n", |
| d->config[PCI_INTERRUPT_LINE]); |
| } |
| if (class == 0x0604) { |
| monitor_printf(mon, " BUS %d.\n", d->config[0x19]); |
| } |
| for(i = 0;i < PCI_NUM_REGIONS; i++) { |
| r = &d->io_regions[i]; |
| if (r->size != 0) { |
| monitor_printf(mon, " BAR%d: ", i); |
| if (r->type & PCI_ADDRESS_SPACE_IO) { |
| monitor_printf(mon, "I/O at 0x%04x [0x%04x].\n", |
| r->addr, r->addr + r->size - 1); |
| } else { |
| monitor_printf(mon, "32 bit memory at 0x%08x [0x%08x].\n", |
| r->addr, r->addr + r->size - 1); |
| } |
| } |
| } |
| if (class == 0x0604 && d->config[0x19] != 0) { |
| pci_for_each_device(d->config[0x19], pci_info_device); |
| } |
| } |
| |
| void pci_for_each_device(int bus_num, void (*fn)(PCIDevice *d)) |
| { |
| PCIBus *bus = first_bus; |
| PCIDevice *d; |
| int devfn; |
| |
| while (bus && bus->bus_num != bus_num) |
| bus = bus->next; |
| if (bus) { |
| for(devfn = 0; devfn < 256; devfn++) { |
| d = bus->devices[devfn]; |
| if (d) |
| fn(d); |
| } |
| } |
| } |
| |
| void pci_info(Monitor *mon) |
| { |
| pci_for_each_device(0, pci_info_device); |
| } |
| |
| static const char * const pci_nic_models[] = { |
| "ne2k_pci", |
| "i82551", |
| "i82557b", |
| "i82559er", |
| "rtl8139", |
| "e1000", |
| "pcnet", |
| "virtio", |
| NULL |
| }; |
| |
| static const char * const pci_nic_names[] = { |
| "ne2k_pci", |
| "i82551", |
| "i82557b", |
| "i82559er", |
| "rtl8139", |
| "e1000", |
| "pcnet", |
| "virtio-net-pci", |
| NULL |
| }; |
| |
| /* Initialize a PCI NIC. */ |
| PCIDevice *pci_nic_init(PCIBus *bus, NICInfo *nd, int devfn, |
| const char *default_model) |
| { |
| DeviceState *dev; |
| int i; |
| |
| qemu_check_nic_model_list(nd, pci_nic_models, default_model); |
| |
| for (i = 0; pci_nic_models[i]; i++) { |
| if (strcmp(nd->model, pci_nic_models[i]) == 0) { |
| dev = qdev_create(&bus->qbus, pci_nic_names[i]); |
| qdev_set_prop_int(dev, "devfn", devfn); |
| qdev_set_netdev(dev, nd); |
| qdev_init(dev); |
| nd->private = dev; |
| return (PCIDevice *)dev; |
| } |
| } |
| |
| return NULL; |
| } |
| |
| struct PCIBridge { |
| PCIDevice dev; |
| PCIBus *bus; |
| }; |
| |
| static void pci_bridge_write_config(PCIDevice *d, |
| uint32_t address, uint32_t val, int len) |
| { |
| PCIBridge *s = (PCIBridge *)d; |
| |
| if (address == 0x19 || (address == 0x18 && len > 1)) { |
| if (address == 0x19) |
| s->bus->bus_num = val & 0xff; |
| else |
| s->bus->bus_num = (val >> 8) & 0xff; |
| #if defined(DEBUG_PCI) |
| printf ("pci-bridge: %s: Assigned bus %d\n", d->name, s->bus->bus_num); |
| #endif |
| } |
| pci_default_write_config(d, address, val, len); |
| } |
| |
| PCIBus *pci_find_bus(int bus_num) |
| { |
| PCIBus *bus = first_bus; |
| |
| while (bus && bus->bus_num != bus_num) |
| bus = bus->next; |
| |
| return bus; |
| } |
| |
| PCIDevice *pci_find_device(int bus_num, int slot, int function) |
| { |
| PCIBus *bus = pci_find_bus(bus_num); |
| |
| if (!bus) |
| return NULL; |
| |
| return bus->devices[PCI_DEVFN(slot, function)]; |
| } |
| |
| PCIBus *pci_bridge_init(PCIBus *bus, int devfn, uint16_t vid, uint16_t did, |
| pci_map_irq_fn map_irq, const char *name) |
| { |
| PCIBridge *s; |
| s = (PCIBridge *)pci_register_device(bus, name, sizeof(PCIBridge), |
| devfn, NULL, pci_bridge_write_config); |
| |
| pci_config_set_vendor_id(s->dev.config, vid); |
| pci_config_set_device_id(s->dev.config, did); |
| |
| s->dev.config[0x04] = 0x06; // command = bus master, pci mem |
| s->dev.config[0x05] = 0x00; |
| s->dev.config[0x06] = 0xa0; // status = fast back-to-back, 66MHz, no error |
| s->dev.config[0x07] = 0x00; // status = fast devsel |
| s->dev.config[0x08] = 0x00; // revision |
| s->dev.config[0x09] = 0x00; // programming i/f |
| pci_config_set_class(s->dev.config, PCI_CLASS_BRIDGE_PCI); |
| s->dev.config[0x0D] = 0x10; // latency_timer |
| s->dev.config[PCI_HEADER_TYPE] = |
| PCI_HEADER_TYPE_MULTI_FUNCTION | PCI_HEADER_TYPE_BRIDGE; // header_type |
| s->dev.config[0x1E] = 0xa0; // secondary status |
| |
| s->bus = pci_register_secondary_bus(&s->dev, map_irq); |
| return s->bus; |
| } |
| |
| typedef struct { |
| DeviceInfo qdev; |
| pci_qdev_initfn init; |
| } PCIDeviceInfo; |
| |
| static void pci_qdev_init(DeviceState *qdev, DeviceInfo *base) |
| { |
| PCIDevice *pci_dev = (PCIDevice *)qdev; |
| PCIDeviceInfo *info = container_of(base, PCIDeviceInfo, qdev); |
| PCIBus *bus; |
| int devfn; |
| |
| bus = FROM_QBUS(PCIBus, qdev_get_parent_bus(qdev)); |
| devfn = qdev_get_prop_int(qdev, "devfn", -1); |
| pci_dev = do_pci_register_device(pci_dev, bus, "FIXME", devfn, |
| NULL, NULL);//FIXME:config_read, config_write); |
| assert(pci_dev); |
| info->init(pci_dev); |
| } |
| |
| void pci_qdev_register(const char *name, int size, pci_qdev_initfn init) |
| { |
| PCIDeviceInfo *info; |
| |
| info = g_malloc0(sizeof(*info)); |
| info->qdev.name = g_strdup(name); |
| info->qdev.size = size; |
| info->init = init; |
| info->qdev.init = pci_qdev_init; |
| info->qdev.bus_type = BUS_TYPE_PCI; |
| |
| qdev_register(&info->qdev); |
| } |
| |
| PCIDevice *pci_create_simple(PCIBus *bus, int devfn, const char *name) |
| { |
| DeviceState *dev; |
| |
| dev = qdev_create(&bus->qbus, name); |
| qdev_set_prop_int(dev, "devfn", devfn); |
| qdev_init(dev); |
| |
| return (PCIDevice *)dev; |
| } |