blob: 09d2e27f572470666de7945f20cdd9b26657302b [file] [log] [blame]
/* Copyright (C) 2009 The Android Open Source Project
**
** This software is licensed under the terms of the GNU General Public
** License version 2, as published by the Free Software Foundation, and
** may be copied, distributed, and modified under those terms.
**
** This program is distributed in the hope that it will be useful,
** but WITHOUT ANY WARRANTY; without even the implied warranty of
** MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
** GNU General Public License for more details.
*/
#include <math.h>
#include "android/hw-sensors.h"
#include "android/utils/debug.h"
#include "android/utils/misc.h"
#include "android/utils/system.h"
#include "android/hw-qemud.h"
#include "android/globals.h"
#include "hw/hw.h"
#include "sysemu/char.h"
#include "qemu/timer.h"
#include "android/sensors-port.h"
#define E(...) derror(__VA_ARGS__)
#define W(...) dwarning(__VA_ARGS__)
#define D(...) VERBOSE_PRINT(sensors,__VA_ARGS__)
#define V(...) VERBOSE_PRINT(init,__VA_ARGS__)
/* define T_ACTIVE to 1 to debug transport communications */
#define T_ACTIVE 0
#if T_ACTIVE
#define T(...) VERBOSE_PRINT(sensors,__VA_ARGS__)
#else
#define T(...) ((void)0)
#endif
/* this code supports emulated sensor hardware
*
* Note that currently, only the accelerometer is really emulated, and only
* for the purpose of allowing auto-rotating the screen in keyboard-less
* configurations.
*
*
*/
static const struct {
const char* name;
int id;
} _sSensors[MAX_SENSORS] = {
#define SENSOR_(x,y) { y, ANDROID_SENSOR_##x },
SENSORS_LIST
#undef SENSOR_
};
static int
_sensorIdFromName( const char* name )
{
int nn;
for (nn = 0; nn < MAX_SENSORS; nn++)
if (!strcmp(_sSensors[nn].name,name))
return _sSensors[nn].id;
return -1;
}
static const char*
_sensorNameFromId( int id )
{
int nn;
for (nn = 0; nn < MAX_SENSORS; nn++)
if (id == _sSensors[nn].id)
return _sSensors[nn].name;
return NULL;
}
/* For common Sensor Value struct */
typedef struct {
float a, b, c;
} SensorValues;
typedef struct {
float x, y, z;
} Acceleration;
typedef struct {
float x, y, z;
} MagneticField;
typedef struct {
float azimuth;
float pitch;
float roll;
} Orientation;
typedef struct {
float celsius;
} Temperature;
typedef struct {
float value;
} Proximity;
typedef struct {
char enabled;
union {
SensorValues value;
Acceleration acceleration;
MagneticField magnetic;
Orientation orientation;
Temperature temperature;
Proximity proximity;
} u;
} Sensor;
/*
* - when the qemu-specific sensors HAL module starts, it sends
* "list-sensors"
*
* - this code replies with a string containing an integer corresponding
* to a bitmap of available hardware sensors in the current AVD
* configuration (e.g. "1" a.k.a (1 << ANDROID_SENSOR_ACCELERATION))
*
* - the HAL module sends "set:<sensor>:<flag>" to enable or disable
* the report of a given sensor state. <sensor> must be the name of
* a given sensor (e.g. "accelerometer"), and <flag> must be either
* "1" (to enable) or "0" (to disable).
*
* - Once at least one sensor is "enabled", this code should periodically
* send information about the corresponding enabled sensors. The default
* period is 200ms.
*
* - the HAL module sends "set-delay:<delay>", where <delay> is an integer
* corresponding to a time delay in milli-seconds. This corresponds to
* a new interval between sensor events sent by this code to the HAL
* module.
*
* - the HAL module can also send a "wake" command. This code should simply
* send the "wake" back to the module. This is used internally to wake a
* blocking read that happens in a different thread. This ping-pong makes
* the code in the HAL module very simple.
*
* - each timer tick, this code sends sensor reports in the following
* format (each line corresponds to a different line sent to the module):
*
* acceleration:<x>:<y>:<z>
* magnetic-field:<x>:<y>:<z>
* orientation:<azimuth>:<pitch>:<roll>
* temperature:<celsius>
* sync:<time_us>
*
* Where each line before the sync:<time_us> is optional and will only
* appear if the corresponding sensor has been enabled by the HAL module.
*
* Note that <time_us> is the VM time in micro-seconds when the report
* was "taken" by this code. This is adjusted by the HAL module to
* emulated system time (using the first sync: to compute an adjustment
* offset).
*/
#define HEADER_SIZE 4
#define BUFFER_SIZE 512
typedef struct HwSensorClient HwSensorClient;
typedef struct {
QemudService* service;
Sensor sensors[MAX_SENSORS];
HwSensorClient* clients;
AndroidSensorsPort* sensors_port;
} HwSensors;
struct HwSensorClient {
HwSensorClient* next;
HwSensors* sensors;
QemudClient* client;
QEMUTimer* timer;
uint32_t enabledMask;
int32_t delay_ms;
};
static void
_hwSensorClient_free( HwSensorClient* cl )
{
/* remove from sensors's list */
if (cl->sensors) {
HwSensorClient** pnode = &cl->sensors->clients;
for (;;) {
HwSensorClient* node = *pnode;
if (node == NULL)
break;
if (node == cl) {
*pnode = cl->next;
break;
}
pnode = &node->next;
}
cl->next = NULL;
cl->sensors = NULL;
}
/* close QEMUD client, if any */
if (cl->client) {
qemud_client_close(cl->client);
cl->client = NULL;
}
/* remove timer, if any */
if (cl->timer) {
timer_del(cl->timer);
timer_free(cl->timer);
cl->timer = NULL;
}
AFREE(cl);
}
/* forward */
static void _hwSensorClient_tick(void* opaque);
static HwSensorClient*
_hwSensorClient_new( HwSensors* sensors )
{
HwSensorClient* cl;
ANEW0(cl);
cl->sensors = sensors;
cl->enabledMask = 0;
cl->delay_ms = 800;
cl->timer = timer_new(QEMU_CLOCK_VIRTUAL, SCALE_NS, _hwSensorClient_tick, cl);
cl->next = sensors->clients;
sensors->clients = cl;
return cl;
}
/* forward */
static void _hwSensorClient_receive( HwSensorClient* cl,
uint8_t* query,
int querylen );
/* Qemud service management */
static void
_hwSensorClient_recv( void* opaque, uint8_t* msg, int msglen,
QemudClient* client )
{
HwSensorClient* cl = opaque;
_hwSensorClient_receive(cl, msg, msglen);
}
static void
_hwSensorClient_close( void* opaque )
{
HwSensorClient* cl = opaque;
/* the client is already closed here */
cl->client = NULL;
_hwSensorClient_free(cl);
}
/* send a one-line message to the HAL module through a qemud channel */
static void
_hwSensorClient_send( HwSensorClient* cl, const uint8_t* msg, int msglen )
{
D("%s: '%s'", __FUNCTION__, quote_bytes((const void*)msg, msglen));
qemud_client_send(cl->client, msg, msglen);
}
static int
_hwSensorClient_enabled( HwSensorClient* cl, int sensorId )
{
return (cl->enabledMask & (1 << sensorId)) != 0;
}
/* this function is called periodically to send sensor reports
* to the HAL module, and re-arm the timer if necessary
*/
static void
_hwSensorClient_tick( void* opaque )
{
HwSensorClient* cl = opaque;
HwSensors* hw = cl->sensors;
int64_t delay = cl->delay_ms;
int64_t now_ns;
uint32_t mask = cl->enabledMask;
Sensor* sensor;
char buffer[128];
if (_hwSensorClient_enabled(cl, ANDROID_SENSOR_ACCELERATION)) {
sensor = &hw->sensors[ANDROID_SENSOR_ACCELERATION];
snprintf(buffer, sizeof buffer, "acceleration:%g:%g:%g",
sensor->u.acceleration.x,
sensor->u.acceleration.y,
sensor->u.acceleration.z);
_hwSensorClient_send(cl, (uint8_t*)buffer, strlen(buffer));
}
if (_hwSensorClient_enabled(cl, ANDROID_SENSOR_MAGNETIC_FIELD)) {
sensor = &hw->sensors[ANDROID_SENSOR_MAGNETIC_FIELD];
/* NOTE: sensors HAL expects "magnetic", not "magnetic-field" name here. */
snprintf(buffer, sizeof buffer, "magnetic:%g:%g:%g",
sensor->u.magnetic.x,
sensor->u.magnetic.y,
sensor->u.magnetic.z);
_hwSensorClient_send(cl, (uint8_t*)buffer, strlen(buffer));
}
if (_hwSensorClient_enabled(cl, ANDROID_SENSOR_ORIENTATION)) {
sensor = &hw->sensors[ANDROID_SENSOR_ORIENTATION];
snprintf(buffer, sizeof buffer, "orientation:%g:%g:%g",
sensor->u.orientation.azimuth,
sensor->u.orientation.pitch,
sensor->u.orientation.roll);
_hwSensorClient_send(cl, (uint8_t*)buffer, strlen(buffer));
}
if (_hwSensorClient_enabled(cl, ANDROID_SENSOR_TEMPERATURE)) {
sensor = &hw->sensors[ANDROID_SENSOR_TEMPERATURE];
snprintf(buffer, sizeof buffer, "temperature:%g",
sensor->u.temperature.celsius);
_hwSensorClient_send(cl, (uint8_t*)buffer, strlen(buffer));
}
if (_hwSensorClient_enabled(cl, ANDROID_SENSOR_PROXIMITY)) {
sensor = &hw->sensors[ANDROID_SENSOR_PROXIMITY];
snprintf(buffer, sizeof buffer, "proximity:%g",
sensor->u.proximity.value);
_hwSensorClient_send(cl, (uint8_t*) buffer, strlen(buffer));
}
now_ns = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL);
snprintf(buffer, sizeof buffer, "sync:%" PRId64, now_ns/1000);
_hwSensorClient_send(cl, (uint8_t*)buffer, strlen(buffer));
/* rearm timer, use a minimum delay of 20 ms, just to
* be safe.
*/
if (mask == 0)
return;
if (delay < 20)
delay = 20;
delay *= 1000000LL; /* convert to nanoseconds */
timer_mod(cl->timer, now_ns + delay);
}
/* handle incoming messages from the HAL module */
static void
_hwSensorClient_receive( HwSensorClient* cl, uint8_t* msg, int msglen )
{
HwSensors* hw = cl->sensors;
D("%s: '%.*s'", __FUNCTION__, msglen, msg);
/* "list-sensors" is used to get an integer bit map of
* available emulated sensors. We compute the mask from the
* current hardware configuration.
*/
if (msglen == 12 && !memcmp(msg, "list-sensors", 12)) {
char buff[12];
int mask = 0;
int nn;
for (nn = 0; nn < MAX_SENSORS; nn++) {
if (hw->sensors[nn].enabled)
mask |= (1 << nn);
}
snprintf(buff, sizeof buff, "%d", mask);
_hwSensorClient_send(cl, (const uint8_t*)buff, strlen(buff));
return;
}
/* "wake" is a special message that must be sent back through
* the channel. It is used to exit a blocking read.
*/
if (msglen == 4 && !memcmp(msg, "wake", 4)) {
_hwSensorClient_send(cl, (const uint8_t*)"wake", 4);
return;
}
/* "set-delay:<delay>" is used to set the delay in milliseconds
* between sensor events
*/
if (msglen > 10 && !memcmp(msg, "set-delay:", 10)) {
cl->delay_ms = atoi((const char*)msg+10);
if (cl->enabledMask != 0)
_hwSensorClient_tick(cl);
return;
}
/* "set:<name>:<state>" is used to enable/disable a given
* sensor. <state> must be 0 or 1
*/
if (msglen > 4 && !memcmp(msg, "set:", 4)) {
char* q;
int id, enabled, oldEnabledMask = cl->enabledMask;
msg += 4;
q = strchr((char*)msg, ':');
if (q == NULL) { /* should not happen */
D("%s: ignore bad 'set' command", __FUNCTION__);
return;
}
*q++ = 0;
id = _sensorIdFromName((const char*)msg);
if (id < 0 || id >= MAX_SENSORS) {
D("%s: ignore unknown sensor name '%s'", __FUNCTION__, msg);
return;
}
if (!hw->sensors[id].enabled) {
D("%s: trying to set disabled %s sensor", __FUNCTION__, msg);
return;
}
enabled = (q[0] == '1');
if (enabled)
cl->enabledMask |= (1 << id);
else
cl->enabledMask &= ~(1 << id);
if (cl->enabledMask != oldEnabledMask) {
D("%s: %s %s sensor", __FUNCTION__,
(cl->enabledMask & (1 << id)) ? "enabling" : "disabling", msg);
}
/* If emulating device is connected update sensor state there too. */
if (hw->sensors_port != NULL) {
if (enabled) {
sensors_port_enable_sensor(hw->sensors_port, (const char*)msg);
} else {
sensors_port_disable_sensor(hw->sensors_port, (const char*)msg);
}
}
_hwSensorClient_tick(cl);
return;
}
D("%s: ignoring unknown query", __FUNCTION__);
}
/* Saves sensor-specific client data to snapshot */
static void
_hwSensorClient_save( QEMUFile* f, QemudClient* client, void* opaque )
{
HwSensorClient* sc = opaque;
qemu_put_be32(f, sc->delay_ms);
qemu_put_be32(f, sc->enabledMask);
timer_put(f, sc->timer);
}
/* Loads sensor-specific client data from snapshot */
static int
_hwSensorClient_load( QEMUFile* f, QemudClient* client, void* opaque )
{
HwSensorClient* sc = opaque;
sc->delay_ms = qemu_get_be32(f);
sc->enabledMask = qemu_get_be32(f);
timer_get(f, sc->timer);
return 0;
}
static QemudClient*
_hwSensors_connect( void* opaque,
QemudService* service,
int channel,
const char* client_param )
{
HwSensors* sensors = opaque;
HwSensorClient* cl = _hwSensorClient_new(sensors);
QemudClient* client = qemud_client_new(service, channel, client_param, cl,
_hwSensorClient_recv,
_hwSensorClient_close,
_hwSensorClient_save,
_hwSensorClient_load );
qemud_client_set_framing(client, 1);
cl->client = client;
return client;
}
/* change the value of the emulated sensor vector */
static void
_hwSensors_setSensorValue( HwSensors* h, int sensor_id, float a, float b, float c )
{
Sensor* s = &h->sensors[sensor_id];
s->u.value.a = a;
s->u.value.b = b;
s->u.value.c = c;
}
/* Saves available sensors to allow checking availability when loaded.
*/
static void
_hwSensors_save( QEMUFile* f, QemudService* sv, void* opaque)
{
HwSensors* h = opaque;
// number of sensors
qemu_put_be32(f, MAX_SENSORS);
AndroidSensor i;
for (i = 0 ; i < MAX_SENSORS; i++) {
Sensor* s = &h->sensors[i];
qemu_put_be32(f, s->enabled);
/* this switch ensures that a warning is raised when a new sensor is
* added and is not added here as well.
*/
switch (i) {
case ANDROID_SENSOR_ACCELERATION:
qemu_put_float(f, s->u.acceleration.x);
qemu_put_float(f, s->u.acceleration.y);
qemu_put_float(f, s->u.acceleration.z);
break;
case ANDROID_SENSOR_MAGNETIC_FIELD:
qemu_put_float(f, s->u.magnetic.x);
qemu_put_float(f, s->u.magnetic.y);
qemu_put_float(f, s->u.magnetic.z);
break;
case ANDROID_SENSOR_ORIENTATION:
qemu_put_float(f, s->u.orientation.azimuth);
qemu_put_float(f, s->u.orientation.pitch);
qemu_put_float(f, s->u.orientation.roll);
break;
case ANDROID_SENSOR_TEMPERATURE:
qemu_put_float(f, s->u.temperature.celsius);
break;
case ANDROID_SENSOR_PROXIMITY:
qemu_put_float(f, s->u.proximity.value);
break;
case MAX_SENSORS:
break;
}
}
}
static int
_hwSensors_load( QEMUFile* f, QemudService* s, void* opaque)
{
HwSensors* h = opaque;
/* check number of sensors */
int32_t num_sensors = qemu_get_be32(f);
if (num_sensors > MAX_SENSORS) {
D("%s: cannot load: snapshot requires %d sensors, %d available\n",
__FUNCTION__, num_sensors, MAX_SENSORS);
return -EIO;
}
/* load sensor state */
AndroidSensor i;
for (i = 0 ; i < num_sensors; i++) {
Sensor* s = &h->sensors[i];
s->enabled = qemu_get_be32(f);
/* this switch ensures that a warning is raised when a new sensor is
* added and is not added here as well.
*/
switch (i) {
case ANDROID_SENSOR_ACCELERATION:
s->u.acceleration.x = qemu_get_float(f);
s->u.acceleration.y = qemu_get_float(f);
s->u.acceleration.z = qemu_get_float(f);
break;
case ANDROID_SENSOR_MAGNETIC_FIELD:
s->u.magnetic.x = qemu_get_float(f);
s->u.magnetic.y = qemu_get_float(f);
s->u.magnetic.z = qemu_get_float(f);
break;
case ANDROID_SENSOR_ORIENTATION:
s->u.orientation.azimuth = qemu_get_float(f);
s->u.orientation.pitch = qemu_get_float(f);
s->u.orientation.roll = qemu_get_float(f);
break;
case ANDROID_SENSOR_TEMPERATURE:
s->u.temperature.celsius = qemu_get_float(f);
break;
case ANDROID_SENSOR_PROXIMITY:
s->u.proximity.value = qemu_get_float(f);
break;
case MAX_SENSORS:
break;
}
}
/* The following is necessary when we resume a snaphost
* created by an older version of the emulator that provided
* less hardware sensors.
*/
for ( ; i < MAX_SENSORS; i++ ) {
h->sensors[i].enabled = 0;
}
return 0;
}
/* change the emulated proximity */
static void
_hwSensors_setProximity( HwSensors* h, float value )
{
Sensor* s = &h->sensors[ANDROID_SENSOR_PROXIMITY];
s->u.proximity.value = value;
}
/* change the coarse orientation (landscape/portrait) of the emulated device */
static void
_hwSensors_setCoarseOrientation( HwSensors* h, AndroidCoarseOrientation orient )
{
/* The Android framework computes the orientation by looking at
* the accelerometer sensor (*not* the orientation sensor !)
*
* That's because the gravity is a constant 9.81 vector that
* can be determined quite easily.
*
* Also, for some reason, the framework code considers that the phone should
* be inclined by 30 degrees along the phone's X axis to be considered
* in its ideal "vertical" position
*
* If the phone is completely vertical, rotating it will not do anything !
*/
const double g = 9.81;
const double angle = 20.0;
const double cos_angle = cos(angle/M_PI);
const double sin_angle = sin(angle/M_PI);
switch (orient) {
case ANDROID_COARSE_PORTRAIT:
_hwSensors_setSensorValue( h, ANDROID_SENSOR_ACCELERATION, 0., g*cos_angle, g*sin_angle );
break;
case ANDROID_COARSE_LANDSCAPE:
_hwSensors_setSensorValue( h, ANDROID_SENSOR_ACCELERATION, g*cos_angle, 0., g*sin_angle );
break;
default:
;
}
}
/* initialize the sensors state */
static void
_hwSensors_init( HwSensors* h )
{
/* Try to see if there is a device attached that can be used for
* sensor emulation. */
h->sensors_port = sensors_port_create(h);
if (h->sensors_port == NULL) {
V("Realistic sensor emulation is not available, since the remote controller is not accessible:\n %s",
strerror(errno));
}
h->service = qemud_service_register("sensors", 0, h, _hwSensors_connect,
_hwSensors_save, _hwSensors_load);
if (android_hw->hw_accelerometer) {
h->sensors[ANDROID_SENSOR_ACCELERATION].enabled = 1;
}
if (android_hw->hw_sensors_proximity) {
h->sensors[ANDROID_SENSOR_PROXIMITY].enabled = 1;
}
if (android_hw->hw_sensors_magnetic_field) {
h->sensors[ANDROID_SENSOR_MAGNETIC_FIELD].enabled = 1;
}
if (android_hw->hw_sensors_orientation) {
h->sensors[ANDROID_SENSOR_ORIENTATION].enabled = 1;
}
if (android_hw->hw_sensors_temperature) {
h->sensors[ANDROID_SENSOR_TEMPERATURE].enabled = 1;
}
/* XXX: TODO: Add other tests when we add the corresponding
* properties to hardware-properties.ini et al. */
_hwSensors_setCoarseOrientation(h, ANDROID_COARSE_PORTRAIT);
_hwSensors_setProximity(h, 1);
}
static HwSensors _sensorsState[1];
void
android_hw_sensors_init( void )
{
HwSensors* hw = _sensorsState;
if (hw->service == NULL) {
_hwSensors_init(hw);
D("%s: sensors qemud service initialized", __FUNCTION__);
}
}
/* change the coarse orientation value */
extern void
android_sensors_set_coarse_orientation( AndroidCoarseOrientation orient )
{
android_hw_sensors_init();
_hwSensors_setCoarseOrientation(_sensorsState, orient);
}
/* Get sensor name from sensor id */
extern const char*
android_sensors_get_name_from_id( int sensor_id )
{
if (sensor_id < 0 || sensor_id >= MAX_SENSORS)
return NULL;
return _sensorNameFromId(sensor_id);
}
/* Get sensor id from sensor name */
extern int
android_sensors_get_id_from_name( char* sensorname )
{
HwSensors* hw = _sensorsState;
if (sensorname == NULL)
return SENSOR_STATUS_UNKNOWN;
int id = _sensorIdFromName(sensorname);
if (id < 0 || id >= MAX_SENSORS)
return SENSOR_STATUS_UNKNOWN;
if (hw->service != NULL) {
if (! hw->sensors[id].enabled)
return SENSOR_STATUS_DISABLED;
} else
return SENSOR_STATUS_NO_SERVICE;
return id;
}
/* Interface of reading the data for all sensors */
extern int
android_sensors_get( int sensor_id, float* a, float* b, float* c )
{
HwSensors* hw = _sensorsState;
*a = 0;
*b = 0;
*c = 0;
if (sensor_id < 0 || sensor_id >= MAX_SENSORS)
return SENSOR_STATUS_UNKNOWN;
Sensor* sensor = &hw->sensors[sensor_id];
if (hw->service != NULL) {
if (! sensor->enabled)
return SENSOR_STATUS_DISABLED;
} else
return SENSOR_STATUS_NO_SERVICE;
*a = sensor->u.value.a;
*b = sensor->u.value.b;
*c = sensor->u.value.c;
return SENSOR_STATUS_OK;
}
/* Interface of setting the data for all sensors */
extern int
android_sensors_set( int sensor_id, float a, float b, float c )
{
HwSensors* hw = _sensorsState;
if (sensor_id < 0 || sensor_id >= MAX_SENSORS)
return SENSOR_STATUS_UNKNOWN;
if (hw->service != NULL) {
if (! hw->sensors[sensor_id].enabled)
return SENSOR_STATUS_DISABLED;
} else
return SENSOR_STATUS_NO_SERVICE;
_hwSensors_setSensorValue(hw, sensor_id, a, b, c);
return SENSOR_STATUS_OK;
}
/* Get Sensor from sensor id */
extern uint8_t
android_sensors_get_sensor_status( int sensor_id )
{
HwSensors* hw = _sensorsState;
if (sensor_id < 0 || sensor_id >= MAX_SENSORS)
return SENSOR_STATUS_UNKNOWN;
return hw->sensors[sensor_id].enabled;
}