| #ifndef QEMU_CHAR_H |
| #define QEMU_CHAR_H |
| |
| #include "qemu-common.h" |
| #include "qemu/queue.h" |
| #include "qemu/option.h" |
| #include "qemu/config-file.h" |
| #include "block/aio.h" |
| #include "qapi/qmp/qobject.h" |
| #include "qapi/qmp/qstring.h" |
| #include "qemu/main-loop.h" |
| |
| /* character device */ |
| |
| #define CHR_EVENT_BREAK 0 /* serial break char */ |
| #define CHR_EVENT_FOCUS 1 /* focus to this terminal (modal input needed) */ |
| #define CHR_EVENT_OPENED 2 /* new connection established */ |
| #define CHR_EVENT_MUX_IN 3 /* mux-focus was set to this terminal */ |
| #define CHR_EVENT_MUX_OUT 4 /* mux-focus will move on */ |
| #define CHR_EVENT_CLOSED 5 /* connection closed */ |
| |
| |
| #define CHR_IOCTL_SERIAL_SET_PARAMS 1 |
| typedef struct { |
| int speed; |
| int parity; |
| int data_bits; |
| int stop_bits; |
| } QEMUSerialSetParams; |
| |
| #define CHR_IOCTL_SERIAL_SET_BREAK 2 |
| |
| #define CHR_IOCTL_PP_READ_DATA 3 |
| #define CHR_IOCTL_PP_WRITE_DATA 4 |
| #define CHR_IOCTL_PP_READ_CONTROL 5 |
| #define CHR_IOCTL_PP_WRITE_CONTROL 6 |
| #define CHR_IOCTL_PP_READ_STATUS 7 |
| #define CHR_IOCTL_PP_EPP_READ_ADDR 8 |
| #define CHR_IOCTL_PP_EPP_READ 9 |
| #define CHR_IOCTL_PP_EPP_WRITE_ADDR 10 |
| #define CHR_IOCTL_PP_EPP_WRITE 11 |
| #define CHR_IOCTL_PP_DATA_DIR 12 |
| |
| #define CHR_IOCTL_SERIAL_SET_TIOCM 13 |
| #define CHR_IOCTL_SERIAL_GET_TIOCM 14 |
| |
| #define CHR_TIOCM_CTS 0x020 |
| #define CHR_TIOCM_CAR 0x040 |
| #define CHR_TIOCM_DSR 0x100 |
| #define CHR_TIOCM_RI 0x080 |
| #define CHR_TIOCM_DTR 0x002 |
| #define CHR_TIOCM_RTS 0x004 |
| |
| typedef void IOEventHandler(void *opaque, int event); |
| |
| struct CharDriverState { |
| void (*init)(struct CharDriverState *s); |
| int (*chr_write)(struct CharDriverState *s, const uint8_t *buf, int len); |
| GSource *(*chr_add_watch)(struct CharDriverState *s, GIOCondition cond); |
| void (*chr_update_read_handler)(struct CharDriverState *s); |
| int (*chr_ioctl)(struct CharDriverState *s, int cmd, void *arg); |
| int (*get_msgfd)(struct CharDriverState *s); |
| int (*chr_add_client)(struct CharDriverState *chr, int fd); |
| IOEventHandler *chr_event; |
| IOCanReadHandler *chr_can_read; |
| IOReadHandler *chr_read; |
| void *handler_opaque; |
| void (*chr_close)(struct CharDriverState *chr); |
| void (*chr_accept_input)(struct CharDriverState *chr); |
| void (*chr_set_echo)(struct CharDriverState *chr, bool echo); |
| void (*chr_set_fe_open)(struct CharDriverState *chr, int fe_open); |
| void (*chr_fe_event)(struct CharDriverState *chr, int event); |
| void *opaque; |
| char *label; |
| char *filename; |
| int be_open; |
| int fe_open; |
| int explicit_fe_open; |
| int explicit_be_open; |
| int avail_connections; |
| int is_mux; |
| guint fd_in_tag; |
| QemuOpts *opts; |
| QTAILQ_ENTRY(CharDriverState) next; |
| }; |
| |
| /** |
| * @qemu_chr_new_from_opts: |
| * |
| * Create a new character backend from a QemuOpts list. |
| * |
| * @opts see qemu-config.c for a list of valid options |
| * @init not sure.. |
| * |
| * Returns: a new character backend |
| */ |
| CharDriverState *qemu_chr_new_from_opts(QemuOpts *opts, |
| void (*init)(struct CharDriverState *s), |
| Error **errp); |
| |
| /** |
| * @qemu_chr_new: |
| * |
| * Create a new character backend from a URI. |
| * |
| * @label the name of the backend |
| * @filename the URI |
| * @init not sure.. |
| * |
| * Returns: a new character backend |
| */ |
| CharDriverState *qemu_chr_new(const char *label, const char *filename, |
| void (*init)(struct CharDriverState *s)); |
| |
| /** |
| * @qemu_chr_delete: |
| * |
| * Destroy a character backend. |
| */ |
| void qemu_chr_delete(CharDriverState *chr); |
| |
| /** |
| * @qemu_chr_fe_set_echo: |
| * |
| * Ask the backend to override its normal echo setting. This only really |
| * applies to the stdio backend and is used by the QMP server such that you |
| * can see what you type if you try to type QMP commands. |
| * |
| * @echo true to enable echo, false to disable echo |
| */ |
| void qemu_chr_fe_set_echo(struct CharDriverState *chr, bool echo); |
| |
| /** |
| * @qemu_chr_fe_set_open: |
| * |
| * Set character frontend open status. This is an indication that the |
| * front end is ready (or not) to begin doing I/O. |
| */ |
| void qemu_chr_fe_set_open(struct CharDriverState *chr, int fe_open); |
| |
| /** |
| * @qemu_chr_fe_event: |
| * |
| * Send an event from the front end to the back end. |
| * |
| * @event the event to send |
| */ |
| void qemu_chr_fe_event(CharDriverState *s, int event); |
| |
| /** |
| * @qemu_chr_fe_printf: |
| * |
| * Write to a character backend using a printf style interface. |
| * |
| * @fmt see #printf |
| */ |
| void qemu_chr_fe_printf(CharDriverState *s, const char *fmt, ...) |
| GCC_FMT_ATTR(2, 3); |
| |
| int qemu_chr_fe_add_watch(CharDriverState *s, GIOCondition cond, |
| GIOFunc func, void *user_data); |
| |
| /** |
| * @qemu_chr_fe_write: |
| * |
| * Write data to a character backend from the front end. This function will |
| * send data from the front end to the back end. |
| * |
| * @buf the data |
| * @len the number of bytes to send |
| * |
| * Returns: the number of bytes consumed |
| */ |
| int qemu_chr_fe_write(CharDriverState *s, const uint8_t *buf, int len); |
| |
| /** |
| * @qemu_chr_fe_write_all: |
| * |
| * Write data to a character backend from the front end. This function will |
| * send data from the front end to the back end. Unlike @qemu_chr_fe_write, |
| * this function will block if the back end cannot consume all of the data |
| * attempted to be written. |
| * |
| * @buf the data |
| * @len the number of bytes to send |
| * |
| * Returns: the number of bytes consumed |
| */ |
| int qemu_chr_fe_write_all(CharDriverState *s, const uint8_t *buf, int len); |
| |
| /** |
| * @qemu_chr_fe_ioctl: |
| * |
| * Issue a device specific ioctl to a backend. |
| * |
| * @cmd see CHR_IOCTL_* |
| * @arg the data associated with @cmd |
| * |
| * Returns: if @cmd is not supported by the backend, -ENOTSUP, otherwise the |
| * return value depends on the semantics of @cmd |
| */ |
| int qemu_chr_fe_ioctl(CharDriverState *s, int cmd, void *arg); |
| |
| /** |
| * @qemu_chr_fe_get_msgfd: |
| * |
| * For backends capable of fd passing, return the latest file descriptor passed |
| * by a client. |
| * |
| * Returns: -1 if fd passing isn't supported or there is no pending file |
| * descriptor. If a file descriptor is returned, subsequent calls to |
| * this function will return -1 until a client sends a new file |
| * descriptor. |
| */ |
| int qemu_chr_fe_get_msgfd(CharDriverState *s); |
| |
| /** |
| * @qemu_chr_fe_claim: |
| * |
| * Claim a backend before using it, should be called before calling |
| * qemu_chr_add_handlers(). |
| * |
| * Returns: -1 if the backend is already in use by another frontend, 0 on |
| * success. |
| */ |
| int qemu_chr_fe_claim(CharDriverState *s); |
| |
| /** |
| * @qemu_chr_fe_claim_no_fail: |
| * |
| * Like qemu_chr_fe_claim, but will exit qemu with an error when the |
| * backend is already in use. |
| */ |
| void qemu_chr_fe_claim_no_fail(CharDriverState *s); |
| |
| /** |
| * @qemu_chr_fe_claim: |
| * |
| * Release a backend for use by another frontend. |
| * |
| * Returns: -1 if the backend is already in use by another frontend, 0 on |
| * success. |
| */ |
| void qemu_chr_fe_release(CharDriverState *s); |
| |
| /** |
| * @qemu_chr_be_can_write: |
| * |
| * Determine how much data the front end can currently accept. This function |
| * returns the number of bytes the front end can accept. If it returns 0, the |
| * front end cannot receive data at the moment. The function must be polled |
| * to determine when data can be received. |
| * |
| * Returns: the number of bytes the front end can receive via @qemu_chr_be_write |
| */ |
| int qemu_chr_be_can_write(CharDriverState *s); |
| |
| /** |
| * @qemu_chr_be_write: |
| * |
| * Write data from the back end to the front end. Before issuing this call, |
| * the caller should call @qemu_chr_be_can_write to determine how much data |
| * the front end can currently accept. |
| * |
| * @buf a buffer to receive data from the front end |
| * @len the number of bytes to receive from the front end |
| */ |
| void qemu_chr_be_write(CharDriverState *s, uint8_t *buf, int len); |
| |
| |
| /** |
| * @qemu_chr_be_event: |
| * |
| * Send an event from the back end to the front end. |
| * |
| * @event the event to send |
| */ |
| void qemu_chr_be_event(CharDriverState *s, int event); |
| |
| void qemu_chr_add_handlers(CharDriverState *s, |
| IOCanReadHandler *fd_can_read, |
| IOReadHandler *fd_read, |
| IOEventHandler *fd_event, |
| void *opaque); |
| |
| void qemu_chr_be_generic_open(CharDriverState *s); |
| void qemu_chr_accept_input(CharDriverState *s); |
| int qemu_chr_add_client(CharDriverState *s, int fd); |
| void qemu_chr_info_print(Monitor *mon, const QObject *ret_data); |
| void qemu_chr_info(Monitor *mon, QObject **ret_data); |
| CharDriverState *qemu_chr_find(const char *name); |
| |
| QemuOpts *qemu_chr_parse_compat(const char *label, const char *filename); |
| |
| void register_char_driver(const char *name, CharDriverState *(*open)(QemuOpts *)); |
| void register_char_driver_qapi(const char *name, ChardevBackendKind kind, |
| void (*parse)(QemuOpts *opts, ChardevBackend *backend, Error **errp)); |
| |
| /* add an eventfd to the qemu devices that are polled */ |
| CharDriverState *qemu_chr_open_eventfd(int eventfd); |
| |
| extern int term_escape_char; |
| |
| CharDriverState *qemu_char_get_next_serial(void); |
| |
| /* msmouse */ |
| CharDriverState *qemu_chr_open_msmouse(void); |
| |
| /* baum.c */ |
| CharDriverState *chr_baum_init(void); |
| |
| #endif |