misc: Fix some typos in names and comments

Most typos were found using a modified version of codespell:

accross -> across
issueing -> issuing
TICNT_THRESHHOLD -> TICNT_THRESHOLD
bandwith -> bandwidth
VCARD_7816_PROPIETARY -> VCARD_7816_PROPRIETARY
occured -> occurred
gaurantee -> guarantee
sofware -> software

Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
diff --git a/block/backup.c b/block/backup.c
index e12b3b1..23c7264 100644
--- a/block/backup.c
+++ b/block/backup.c
@@ -290,7 +290,7 @@
 
                 for (i = 0; i < BACKUP_SECTORS_PER_CLUSTER;) {
                     /* bdrv_co_is_allocated() only returns true/false based
-                     * on the first set of sectors it comes accross that
+                     * on the first set of sectors it comes across that
                      * are are all in the same state.
                      * For that reason we must verify each sector in the
                      * backup cluster length.  We end up copying more than
diff --git a/hw/s390x/css.c b/hw/s390x/css.c
index 93b0b97..101da63 100644
--- a/hw/s390x/css.c
+++ b/hw/s390x/css.c
@@ -124,7 +124,7 @@
     /* Path management: In our simple css, we always choose the only path. */
     path = 0x80;
 
-    /* Reset values prior to 'issueing the clear signal'. */
+    /* Reset values prior to 'issuing the clear signal'. */
     p->lpum = 0;
     p->pom = 0xff;
     s->flags &= ~SCSW_FLAGS_MASK_PNO;
diff --git a/hw/timer/exynos4210_rtc.c b/hw/timer/exynos4210_rtc.c
index 3f2c8c5..026f81a 100644
--- a/hw/timer/exynos4210_rtc.c
+++ b/hw/timer/exynos4210_rtc.c
@@ -67,7 +67,7 @@
 #define     CURTICNT        0x0090
 
 #define     TICK_TIMER_ENABLE   0x0100
-#define     TICNT_THRESHHOLD    2
+#define     TICNT_THRESHOLD     2
 
 
 #define     RTC_ENABLE          0x0001
@@ -429,7 +429,7 @@
         s->reg_rtccon = value;
         break;
     case TICCNT:
-        if (value > TICNT_THRESHHOLD) {
+        if (value > TICNT_THRESHOLD) {
             s->reg_ticcnt = value;
         } else {
             fprintf(stderr,
diff --git a/include/hw/bt.h b/include/hw/bt.h
index 830af94..3f365bc 100644
--- a/include/hw/bt.h
+++ b/include/hw/bt.h
@@ -640,8 +640,8 @@
 #define OCF_SETUP_SYNC_CONN		0x0028
 typedef struct {
     uint16_t	handle;
-    uint32_t	tx_bandwith;
-    uint32_t	rx_bandwith;
+    uint32_t	tx_bandwidth;
+    uint32_t	rx_bandwidth;
     uint16_t	max_latency;
     uint16_t	voice_setting;
     uint8_t	retrans_effort;
@@ -652,8 +652,8 @@
 #define OCF_ACCEPT_SYNC_CONN_REQ	0x0029
 typedef struct {
     bdaddr_t	bdaddr;
-    uint32_t	tx_bandwith;
-    uint32_t	rx_bandwith;
+    uint32_t	tx_bandwidth;
+    uint32_t	rx_bandwidth;
     uint16_t	max_latency;
     uint16_t	voice_setting;
     uint8_t	retrans_effort;
diff --git a/libcacard/card_7816.c b/libcacard/card_7816.c
index 8d06326..c28bb60 100644
--- a/libcacard/card_7816.c
+++ b/libcacard/card_7816.c
@@ -232,7 +232,7 @@
     case 0xf0:
     default:
         apdu->a_gen_type =
-            (apdu->a_cla == 0xff) ? VCARD_7816_PTS : VCARD_7816_PROPIETARY;
+            (apdu->a_cla == 0xff) ? VCARD_7816_PTS : VCARD_7816_PROPRIETARY;
         break;
     }
     return VCARD7816_STATUS_SUCCESS;
diff --git a/libcacard/card_7816t.h b/libcacard/card_7816t.h
index 9333285..8eef0ce 100644
--- a/libcacard/card_7816t.h
+++ b/libcacard/card_7816t.h
@@ -43,7 +43,7 @@
     VCARD_7816_ISO,
     VCARD_7816_RFU,
     VCARD_7816_PTS,
-    VCARD_7816_PROPIETARY
+    VCARD_7816_PROPRIETARY
 } VCardAPDUType;
 
 
diff --git a/linux-headers/asm-powerpc/epapr_hcalls.h b/linux-headers/asm-powerpc/epapr_hcalls.h
index 06f7247..33b3f89 100644
--- a/linux-headers/asm-powerpc/epapr_hcalls.h
+++ b/linux-headers/asm-powerpc/epapr_hcalls.h
@@ -78,7 +78,7 @@
 #define EV_SUCCESS		0
 #define EV_EPERM		1	/* Operation not permitted */
 #define EV_ENOENT		2	/*  Entry Not Found */
-#define EV_EIO			3	/* I/O error occured */
+#define EV_EIO			3	/* I/O error occurred */
 #define EV_EAGAIN		4	/* The operation had insufficient
 					 * resources to complete and should be
 					 * retried
@@ -89,7 +89,7 @@
 #define EV_ENODEV		7	/* No such device */
 #define EV_EINVAL		8	/* An argument supplied to the hcall
 					   was out of range or invalid */
-#define EV_INTERNAL		9	/* An internal error occured */
+#define EV_INTERNAL		9	/* An internal error occurred */
 #define EV_CONFIG		10	/* A configuration error was detected */
 #define EV_INVALID_STATE	11	/* The object is in an invalid state */
 #define EV_UNIMPLEMENTED	12	/* Unimplemented hypercall */
diff --git a/migration-rdma.c b/migration-rdma.c
index 3d1266f..f540366 100644
--- a/migration-rdma.c
+++ b/migration-rdma.c
@@ -756,7 +756,7 @@
  * connections (both IPv4 and IPv6) if the destination machine does not have
  * a regular infiniband network available for use.
  *
- * The only way to gaurantee that an error is thrown for broken kernels is
+ * The only way to guarantee that an error is thrown for broken kernels is
  * for the management software to choose a *specific* interface at bind time
  * and validate what time of hardware it is.
  *
@@ -778,7 +778,7 @@
  * Infiniband. 
  *
  * If we detect that we have a *pure* RoCE environment, then we can safely
- * thrown an error even if the management sofware has specified '[::]' as the
+ * thrown an error even if the management software has specified '[::]' as the
  * bind address.
  *
  * However, if there is are multiple hetergeneous devices, then we cannot make
@@ -801,7 +801,7 @@
      * devices (non-ethernet).
      * 
      * If not, then we can safely proceed with the migration.
-     * Otherwise, there are no gaurantees until the bug is fixed in linux.
+     * Otherwise, there are no guarantees until the bug is fixed in linux.
      */
     if (!verbs) {
 	    int num_devices, x;