diff --git a/block.c b/block.c
index f9c6bb7..1bc0e73 100644
--- a/block.c
+++ b/block.c
@@ -1822,15 +1822,18 @@
     bs_dest->enable_write_cache = bs_src->enable_write_cache;
 
     /* i/o throttled req */
-    memcpy(&bs_dest->throttle_state,
-           &bs_src->throttle_state,
-           sizeof(ThrottleState));
+    bs_dest->throttle_state     = bs_src->throttle_state,
+    bs_dest->io_limits_enabled  = bs_src->io_limits_enabled;
+    bs_dest->pending_reqs[0]    = bs_src->pending_reqs[0];
+    bs_dest->pending_reqs[1]    = bs_src->pending_reqs[1];
+    bs_dest->throttled_reqs[0]  = bs_src->throttled_reqs[0];
+    bs_dest->throttled_reqs[1]  = bs_src->throttled_reqs[1];
+    memcpy(&bs_dest->round_robin,
+           &bs_src->round_robin,
+           sizeof(bs_dest->round_robin));
     memcpy(&bs_dest->throttle_timers,
            &bs_src->throttle_timers,
            sizeof(ThrottleTimers));
-    bs_dest->throttled_reqs[0]  = bs_src->throttled_reqs[0];
-    bs_dest->throttled_reqs[1]  = bs_src->throttled_reqs[1];
-    bs_dest->io_limits_enabled  = bs_src->io_limits_enabled;
 
     /* r/w error */
     bs_dest->on_read_error      = bs_src->on_read_error;
diff --git a/block/io.c b/block/io.c
index 61a9d1d..bb4f787 100644
--- a/block/io.c
+++ b/block/io.c
@@ -23,9 +23,9 @@
  */
 
 #include "trace.h"
-#include "sysemu/qtest.h"
 #include "block/blockjob.h"
 #include "block/block_int.h"
+#include "block/throttle-groups.h"
 
 #define NOT_DONE 0x7fffffff /* used while emulated sync operation in progress */
 
@@ -65,7 +65,7 @@
 {
     int i;
 
-    throttle_config(&bs->throttle_state, &bs->throttle_timers, cfg);
+    throttle_group_config(bs, cfg);
 
     for (i = 0; i < 2; i++) {
         qemu_co_enter_next(&bs->throttled_reqs[i]);
@@ -95,76 +95,33 @@
 void bdrv_io_limits_disable(BlockDriverState *bs)
 {
     bs->io_limits_enabled = false;
-
     bdrv_start_throttled_reqs(bs);
-
-    throttle_timers_destroy(&bs->throttle_timers);
-}
-
-static void bdrv_throttle_read_timer_cb(void *opaque)
-{
-    BlockDriverState *bs = opaque;
-    qemu_co_enter_next(&bs->throttled_reqs[0]);
-}
-
-static void bdrv_throttle_write_timer_cb(void *opaque)
-{
-    BlockDriverState *bs = opaque;
-    qemu_co_enter_next(&bs->throttled_reqs[1]);
+    throttle_group_unregister_bs(bs);
 }
 
 /* should be called before bdrv_set_io_limits if a limit is set */
-void bdrv_io_limits_enable(BlockDriverState *bs)
+void bdrv_io_limits_enable(BlockDriverState *bs, const char *group)
 {
-    int clock_type = QEMU_CLOCK_REALTIME;
-
-    if (qtest_enabled()) {
-        /* For testing block IO throttling only */
-        clock_type = QEMU_CLOCK_VIRTUAL;
-    }
     assert(!bs->io_limits_enabled);
-    throttle_init(&bs->throttle_state);
-    throttle_timers_init(&bs->throttle_timers,
-                         bdrv_get_aio_context(bs),
-                         clock_type,
-                         bdrv_throttle_read_timer_cb,
-                         bdrv_throttle_write_timer_cb,
-                         bs);
+    throttle_group_register_bs(bs, group);
     bs->io_limits_enabled = true;
 }
 
-/* This function makes an IO wait if needed
- *
- * @nb_sectors: the number of sectors of the IO
- * @is_write:   is the IO a write
- */
-static void bdrv_io_limits_intercept(BlockDriverState *bs,
-                                     unsigned int bytes,
-                                     bool is_write)
+void bdrv_io_limits_update_group(BlockDriverState *bs, const char *group)
 {
-    /* does this io must wait */
-    bool must_wait = throttle_schedule_timer(&bs->throttle_state,
-                                             &bs->throttle_timers,
-                                             is_write);
-
-    /* if must wait or any request of this type throttled queue the IO */
-    if (must_wait ||
-        !qemu_co_queue_empty(&bs->throttled_reqs[is_write])) {
-        qemu_co_queue_wait(&bs->throttled_reqs[is_write]);
-    }
-
-    /* the IO will be executed, do the accounting */
-    throttle_account(&bs->throttle_state, is_write, bytes);
-
-
-    /* if the next request must wait -> do nothing */
-    if (throttle_schedule_timer(&bs->throttle_state, &bs->throttle_timers,
-                                is_write)) {
+    /* this bs is not part of any group */
+    if (!bs->throttle_state) {
         return;
     }
 
-    /* else queue next request for execution */
-    qemu_co_queue_next(&bs->throttled_reqs[is_write]);
+    /* this bs is a part of the same group than the one we want */
+    if (!g_strcmp0(throttle_group_get_name(bs), group)) {
+        return;
+    }
+
+    /* need to change the group this bs belong to */
+    bdrv_io_limits_disable(bs);
+    bdrv_io_limits_enable(bs, group);
 }
 
 void bdrv_setup_io_funcs(BlockDriver *bdrv)
@@ -971,7 +928,7 @@
 
     /* throttling disk I/O */
     if (bs->io_limits_enabled) {
-        bdrv_io_limits_intercept(bs, bytes, false);
+        throttle_group_co_io_limits_intercept(bs, bytes, false);
     }
 
     /* Align read if necessary by padding qiov */
@@ -1301,7 +1258,7 @@
 
     /* throttling disk I/O */
     if (bs->io_limits_enabled) {
-        bdrv_io_limits_intercept(bs, bytes, true);
+        throttle_group_co_io_limits_intercept(bs, bytes, true);
     }
 
     /*
diff --git a/block/qapi.c b/block/qapi.c
index 18d2b95..a5ac312 100644
--- a/block/qapi.c
+++ b/block/qapi.c
@@ -24,6 +24,7 @@
 
 #include "block/qapi.h"
 #include "block/block_int.h"
+#include "block/throttle-groups.h"
 #include "block/write-threshold.h"
 #include "qmp-commands.h"
 #include "qapi-visit.h"
@@ -65,7 +66,9 @@
 
     if (bs->io_limits_enabled) {
         ThrottleConfig cfg;
-        throttle_get_config(&bs->throttle_state, &cfg);
+
+        throttle_group_get_config(bs, &cfg);
+
         info->bps     = cfg.buckets[THROTTLE_BPS_TOTAL].avg;
         info->bps_rd  = cfg.buckets[THROTTLE_BPS_READ].avg;
         info->bps_wr  = cfg.buckets[THROTTLE_BPS_WRITE].avg;
diff --git a/block/throttle-groups.c b/block/throttle-groups.c
index 352077f..da8c70c 100644
--- a/block/throttle-groups.c
+++ b/block/throttle-groups.c
@@ -23,6 +23,9 @@
  */
 
 #include "block/throttle-groups.h"
+#include "qemu/queue.h"
+#include "qemu/thread.h"
+#include "sysemu/qtest.h"
 
 /* The ThrottleGroup structure (with its ThrottleState) is shared
  * among different BlockDriverState and it's independent from
@@ -160,6 +163,153 @@
     return next;
 }
 
+/* Return the next BlockDriverState in the round-robin sequence with
+ * pending I/O requests.
+ *
+ * This assumes that tg->lock is held.
+ *
+ * @bs:        the current BlockDriverState
+ * @is_write:  the type of operation (read/write)
+ * @ret:       the next BlockDriverState with pending requests, or bs
+ *             if there is none.
+ */
+static BlockDriverState *next_throttle_token(BlockDriverState *bs,
+                                             bool is_write)
+{
+    ThrottleGroup *tg = container_of(bs->throttle_state, ThrottleGroup, ts);
+    BlockDriverState *token, *start;
+
+    start = token = tg->tokens[is_write];
+
+    /* get next bs round in round robin style */
+    token = throttle_group_next_bs(token);
+    while (token != start && !token->pending_reqs[is_write]) {
+        token = throttle_group_next_bs(token);
+    }
+
+    /* If no IO are queued for scheduling on the next round robin token
+     * then decide the token is the current bs because chances are
+     * the current bs get the current request queued.
+     */
+    if (token == start && !token->pending_reqs[is_write]) {
+        token = bs;
+    }
+
+    return token;
+}
+
+/* Check if the next I/O request for a BlockDriverState needs to be
+ * throttled or not. If there's no timer set in this group, set one
+ * and update the token accordingly.
+ *
+ * This assumes that tg->lock is held.
+ *
+ * @bs:         the current BlockDriverState
+ * @is_write:   the type of operation (read/write)
+ * @ret:        whether the I/O request needs to be throttled or not
+ */
+static bool throttle_group_schedule_timer(BlockDriverState *bs,
+                                          bool is_write)
+{
+    ThrottleState *ts = bs->throttle_state;
+    ThrottleTimers *tt = &bs->throttle_timers;
+    ThrottleGroup *tg = container_of(ts, ThrottleGroup, ts);
+    bool must_wait;
+
+    /* Check if any of the timers in this group is already armed */
+    if (tg->any_timer_armed[is_write]) {
+        return true;
+    }
+
+    must_wait = throttle_schedule_timer(ts, tt, is_write);
+
+    /* If a timer just got armed, set bs as the current token */
+    if (must_wait) {
+        tg->tokens[is_write] = bs;
+        tg->any_timer_armed[is_write] = true;
+    }
+
+    return must_wait;
+}
+
+/* Look for the next pending I/O request and schedule it.
+ *
+ * This assumes that tg->lock is held.
+ *
+ * @bs:        the current BlockDriverState
+ * @is_write:  the type of operation (read/write)
+ */
+static void schedule_next_request(BlockDriverState *bs, bool is_write)
+{
+    ThrottleGroup *tg = container_of(bs->throttle_state, ThrottleGroup, ts);
+    bool must_wait;
+    BlockDriverState *token;
+
+    /* Check if there's any pending request to schedule next */
+    token = next_throttle_token(bs, is_write);
+    if (!token->pending_reqs[is_write]) {
+        return;
+    }
+
+    /* Set a timer for the request if it needs to be throttled */
+    must_wait = throttle_group_schedule_timer(token, is_write);
+
+    /* If it doesn't have to wait, queue it for immediate execution */
+    if (!must_wait) {
+        /* Give preference to requests from the current bs */
+        if (qemu_in_coroutine() &&
+            qemu_co_queue_next(&bs->throttled_reqs[is_write])) {
+            token = bs;
+        } else {
+            ThrottleTimers *tt = &token->throttle_timers;
+            int64_t now = qemu_clock_get_ns(tt->clock_type);
+            timer_mod(tt->timers[is_write], now + 1);
+            tg->any_timer_armed[is_write] = true;
+        }
+        tg->tokens[is_write] = token;
+    }
+}
+
+/* Check if an I/O request needs to be throttled, wait and set a timer
+ * if necessary, and schedule the next request using a round robin
+ * algorithm.
+ *
+ * @bs:        the current BlockDriverState
+ * @bytes:     the number of bytes for this I/O
+ * @is_write:  the type of operation (read/write)
+ */
+void coroutine_fn throttle_group_co_io_limits_intercept(BlockDriverState *bs,
+                                                        unsigned int bytes,
+                                                        bool is_write)
+{
+    bool must_wait;
+    BlockDriverState *token;
+
+    ThrottleGroup *tg = container_of(bs->throttle_state, ThrottleGroup, ts);
+    qemu_mutex_lock(&tg->lock);
+
+    /* First we check if this I/O has to be throttled. */
+    token = next_throttle_token(bs, is_write);
+    must_wait = throttle_group_schedule_timer(token, is_write);
+
+    /* Wait if there's a timer set or queued requests of this type */
+    if (must_wait || bs->pending_reqs[is_write]) {
+        bs->pending_reqs[is_write]++;
+        qemu_mutex_unlock(&tg->lock);
+        qemu_co_queue_wait(&bs->throttled_reqs[is_write]);
+        qemu_mutex_lock(&tg->lock);
+        bs->pending_reqs[is_write]--;
+    }
+
+    /* The I/O will be executed, so do the accounting */
+    throttle_account(bs->throttle_state, is_write, bytes);
+
+    /* Schedule the next request */
+    schedule_next_request(bs, is_write);
+
+    qemu_mutex_unlock(&tg->lock);
+}
+
 /* Update the throttle configuration for a particular group. Similar
  * to throttle_config(), but guarantees atomicity within the
  * throttling group.
@@ -195,9 +345,49 @@
     qemu_mutex_unlock(&tg->lock);
 }
 
-/* Register a BlockDriverState in the throttling group, also updating
- * its throttle_state pointer to point to it. If a throttling group
- * with that name does not exist yet, it will be created.
+/* ThrottleTimers callback. This wakes up a request that was waiting
+ * because it had been throttled.
+ *
+ * @bs:        the BlockDriverState whose request had been throttled
+ * @is_write:  the type of operation (read/write)
+ */
+static void timer_cb(BlockDriverState *bs, bool is_write)
+{
+    ThrottleState *ts = bs->throttle_state;
+    ThrottleGroup *tg = container_of(ts, ThrottleGroup, ts);
+    bool empty_queue;
+
+    /* The timer has just been fired, so we can update the flag */
+    qemu_mutex_lock(&tg->lock);
+    tg->any_timer_armed[is_write] = false;
+    qemu_mutex_unlock(&tg->lock);
+
+    /* Run the request that was waiting for this timer */
+    empty_queue = !qemu_co_enter_next(&bs->throttled_reqs[is_write]);
+
+    /* If the request queue was empty then we have to take care of
+     * scheduling the next one */
+    if (empty_queue) {
+        qemu_mutex_lock(&tg->lock);
+        schedule_next_request(bs, is_write);
+        qemu_mutex_unlock(&tg->lock);
+    }
+}
+
+static void read_timer_cb(void *opaque)
+{
+    timer_cb(opaque, false);
+}
+
+static void write_timer_cb(void *opaque)
+{
+    timer_cb(opaque, true);
+}
+
+/* Register a BlockDriverState in the throttling group, also
+ * initializing its timers and updating its throttle_state pointer to
+ * point to it. If a throttling group with that name does not exist
+ * yet, it will be created.
  *
  * @bs:        the BlockDriverState to insert
  * @groupname: the name of the group
@@ -206,6 +396,12 @@
 {
     int i;
     ThrottleGroup *tg = throttle_group_incref(groupname);
+    int clock_type = QEMU_CLOCK_REALTIME;
+
+    if (qtest_enabled()) {
+        /* For testing block IO throttling only */
+        clock_type = QEMU_CLOCK_VIRTUAL;
+    }
 
     bs->throttle_state = &tg->ts;
 
@@ -218,11 +414,20 @@
     }
 
     QLIST_INSERT_HEAD(&tg->head, bs, round_robin);
+
+    throttle_timers_init(&bs->throttle_timers,
+                         bdrv_get_aio_context(bs),
+                         clock_type,
+                         read_timer_cb,
+                         write_timer_cb,
+                         bs);
+
     qemu_mutex_unlock(&tg->lock);
 }
 
 /* Unregister a BlockDriverState from its group, removing it from the
- * list and setting the throttle_state pointer to NULL.
+ * list, destroying the timers and setting the throttle_state pointer
+ * to NULL.
  *
  * The group will be destroyed if it's empty after this operation.
  *
@@ -247,6 +452,7 @@
 
     /* remove the current bs from the list */
     QLIST_REMOVE(bs, round_robin);
+    throttle_timers_destroy(&bs->throttle_timers);
     qemu_mutex_unlock(&tg->lock);
 
     throttle_group_unref(tg);
diff --git a/blockdev.c b/blockdev.c
index de94a8b..d4274ef 100644
--- a/blockdev.c
+++ b/blockdev.c
@@ -34,6 +34,7 @@
 #include "sysemu/blockdev.h"
 #include "hw/block/block.h"
 #include "block/blockjob.h"
+#include "block/throttle-groups.h"
 #include "monitor/monitor.h"
 #include "qemu/option.h"
 #include "qemu/config-file.h"
@@ -357,6 +358,7 @@
     const char *id;
     bool has_driver_specific_opts;
     BlockdevDetectZeroesOptions detect_zeroes;
+    const char *throttling_group;
 
     /* Check common options by copying from bs_opts to opts, all other options
      * stay in bs_opts for processing by bdrv_open(). */
@@ -459,6 +461,8 @@
 
     cfg.op_size = qemu_opt_get_number(opts, "throttling.iops-size", 0);
 
+    throttling_group = qemu_opt_get(opts, "throttling.group");
+
     if (!check_throttle_config(&cfg, &error)) {
         error_propagate(errp, error);
         goto early_err;
@@ -547,7 +551,10 @@
 
     /* disk I/O throttling */
     if (throttle_enabled(&cfg)) {
-        bdrv_io_limits_enable(bs);
+        if (!throttling_group) {
+            throttling_group = blk_name(blk);
+        }
+        bdrv_io_limits_enable(bs, throttling_group);
         bdrv_set_io_limits(bs, &cfg);
     }
 
@@ -711,6 +718,8 @@
 
         { "iops_size",      "throttling.iops-size" },
 
+        { "group",          "throttling.group" },
+
         { "readonly",       "read-only" },
     };
 
@@ -1951,7 +1960,9 @@
                                bool has_iops_wr_max,
                                int64_t iops_wr_max,
                                bool has_iops_size,
-                               int64_t iops_size, Error **errp)
+                               int64_t iops_size,
+                               bool has_group,
+                               const char *group, Error **errp)
 {
     ThrottleConfig cfg;
     BlockDriverState *bs;
@@ -2004,14 +2015,19 @@
     aio_context = bdrv_get_aio_context(bs);
     aio_context_acquire(aio_context);
 
-    if (!bs->io_limits_enabled && throttle_enabled(&cfg)) {
-        bdrv_io_limits_enable(bs);
-    } else if (bs->io_limits_enabled && !throttle_enabled(&cfg)) {
-        bdrv_io_limits_disable(bs);
-    }
-
-    if (bs->io_limits_enabled) {
+    if (throttle_enabled(&cfg)) {
+        /* Enable I/O limits if they're not enabled yet, otherwise
+         * just update the throttling group. */
+        if (!bs->io_limits_enabled) {
+            bdrv_io_limits_enable(bs, has_group ? group : device);
+        } else if (has_group) {
+            bdrv_io_limits_update_group(bs, group);
+        }
+        /* Set the new throttling configuration */
         bdrv_set_io_limits(bs, &cfg);
+    } else if (bs->io_limits_enabled) {
+        /* If all throttling settings are set to 0, disable I/O limits */
+        bdrv_io_limits_disable(bs);
     }
 
     aio_context_release(aio_context);
@@ -3189,6 +3205,10 @@
             .type = QEMU_OPT_NUMBER,
             .help = "when limiting by iops max size of an I/O in bytes",
         },{
+            .name = "throttling.group",
+            .type = QEMU_OPT_STRING,
+            .help = "name of the block throttling group",
+        },{
             .name = "copy-on-read",
             .type = QEMU_OPT_BOOL,
             .help = "copy read data from backing file into image file",
diff --git a/hmp.c b/hmp.c
index 514f22f..eb5ef61 100644
--- a/hmp.c
+++ b/hmp.c
@@ -1356,7 +1356,9 @@
                               false,
                               0,
                               false, /* No default I/O size */
-                              0, &err);
+                              0,
+                              false,
+                              NULL, &err);
     hmp_handle_error(mon, &err);
 }
 
diff --git a/include/block/block.h b/include/block/block.h
index f7680b6..f6fb8c4 100644
--- a/include/block/block.h
+++ b/include/block/block.h
@@ -173,8 +173,9 @@
 void bdrv_info_stats(Monitor *mon, QObject **ret_data);
 
 /* disk I/O throttling */
-void bdrv_io_limits_enable(BlockDriverState *bs);
+void bdrv_io_limits_enable(BlockDriverState *bs, const char *group);
 void bdrv_io_limits_disable(BlockDriverState *bs);
+void bdrv_io_limits_update_group(BlockDriverState *bs, const char *group);
 
 void bdrv_init(void);
 void bdrv_init_with_whitelist(void);
diff --git a/include/block/block_int.h b/include/block/block_int.h
index 8d15c7b..b174852 100644
--- a/include/block/block_int.h
+++ b/include/block/block_int.h
@@ -379,10 +379,13 @@
     unsigned int serialising_in_flight;
 
     /* I/O throttling */
-    ThrottleState throttle_state;
-    ThrottleTimers throttle_timers;
     CoQueue      throttled_reqs[2];
     bool         io_limits_enabled;
+    /* The following fields are protected by the ThrottleGroup lock.
+     * See the ThrottleGroup documentation for details. */
+    ThrottleState *throttle_state;
+    ThrottleTimers throttle_timers;
+    unsigned       pending_reqs[2];
     QLIST_ENTRY(BlockDriverState) round_robin;
 
     /* I/O stats (display with "info blockstats"). */
diff --git a/include/block/throttle-groups.h b/include/block/throttle-groups.h
index b966ec7..322139a 100644
--- a/include/block/throttle-groups.h
+++ b/include/block/throttle-groups.h
@@ -36,4 +36,8 @@
 void throttle_group_register_bs(BlockDriverState *bs, const char *groupname);
 void throttle_group_unregister_bs(BlockDriverState *bs);
 
+void coroutine_fn throttle_group_co_io_limits_intercept(BlockDriverState *bs,
+                                                        unsigned int bytes,
+                                                        bool is_write);
+
 #endif
diff --git a/qapi/block-core.json b/qapi/block-core.json
index 8411d4f..3087154 100644
--- a/qapi/block-core.json
+++ b/qapi/block-core.json
@@ -1062,6 +1062,27 @@
 #
 # Change I/O throttle limits for a block drive.
 #
+# Since QEMU 2.4, each device with I/O limits is member of a throttle
+# group.
+#
+# If two or more devices are members of the same group, the limits
+# will apply to the combined I/O of the whole group in a round-robin
+# fashion. Therefore, setting new I/O limits to a device will affect
+# the whole group.
+#
+# The name of the group can be specified using the 'group' parameter.
+# If the parameter is unset, it is assumed to be the current group of
+# that device. If it's not in any group yet, the name of the device
+# will be used as the name for its group.
+#
+# The 'group' parameter can also be used to move a device to a
+# different group. In this case the limits specified in the parameters
+# will be applied to the new group only.
+#
+# I/O limits can be disabled by setting all of them to 0. In this case
+# the device will be removed from its group and the rest of its
+# members will no be affected. The 'group' parameter is ignored.
+#
 # @device: The name of the device
 #
 # @bps: total throughput limit in bytes per second
@@ -1090,6 +1111,8 @@
 #
 # @iops_size: #optional an I/O size in bytes (Since 1.7)
 #
+# @group: #optional throttle group name (Since 2.4)
+#
 # Returns: Nothing on success
 #          If @device is not a valid block device, DeviceNotFound
 #
@@ -1101,7 +1124,7 @@
             '*bps_max': 'int', '*bps_rd_max': 'int',
             '*bps_wr_max': 'int', '*iops_max': 'int',
             '*iops_rd_max': 'int', '*iops_wr_max': 'int',
-            '*iops_size': 'int' } }
+            '*iops_size': 'int', '*group': 'str' } }
 
 ##
 # @block-stream:
diff --git a/qemu-options.hx b/qemu-options.hx
index 1d281f6..289ddcb 100644
--- a/qemu-options.hx
+++ b/qemu-options.hx
@@ -468,6 +468,7 @@
     "       [[,bps_max=bm]|[[,bps_rd_max=rm][,bps_wr_max=wm]]]\n"
     "       [[,iops_max=im]|[[,iops_rd_max=irm][,iops_wr_max=iwm]]]\n"
     "       [[,iops_size=is]]\n"
+    "       [[,group=g]]\n"
     "                use 'file' as a drive image\n", QEMU_ARCH_ALL)
 STEXI
 @item -drive @var{option}[,@var{option}[,@var{option}[,...]]]
diff --git a/qmp-commands.hx b/qmp-commands.hx
index 867a21f..a819160 100644
--- a/qmp-commands.hx
+++ b/qmp-commands.hx
@@ -1853,7 +1853,7 @@
 
     {
         .name       = "block_set_io_throttle",
-        .args_type  = "device:B,bps:l,bps_rd:l,bps_wr:l,iops:l,iops_rd:l,iops_wr:l,bps_max:l?,bps_rd_max:l?,bps_wr_max:l?,iops_max:l?,iops_rd_max:l?,iops_wr_max:l?,iops_size:l?",
+        .args_type  = "device:B,bps:l,bps_rd:l,bps_wr:l,iops:l,iops_rd:l,iops_wr:l,bps_max:l?,bps_rd_max:l?,bps_wr_max:l?,iops_max:l?,iops_rd_max:l?,iops_wr_max:l?,iops_size:l?,group:s?",
         .mhandler.cmd_new = qmp_marshal_input_block_set_io_throttle,
     },
 
@@ -1879,6 +1879,7 @@
 - "iops_rd_max":  read I/O operations max (json-int)
 - "iops_wr_max":  write I/O operations max (json-int)
 - "iops_size":  I/O size in bytes when limiting (json-int)
+- "group": throttle group name (json-string)
 
 Example: