exec: Simplify the guest physical memory allocation hook
Make it a generic hook rather than a KVM hook. Less code and
ifdeffery.
Since the only user of the hook is old S390 KVM, there's hope we can
get rid of it some day.
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Message-id: 1375276272-15988-5-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
diff --git a/exec.c b/exec.c
index 0a6dd2e..a3dfd1d 100644
--- a/exec.c
+++ b/exec.c
@@ -749,6 +749,18 @@
uint16_t section);
static subpage_t *subpage_init(AddressSpace *as, hwaddr base);
+static void *(*phys_mem_alloc)(ram_addr_t size) = qemu_anon_ram_alloc;
+
+/*
+ * Set a custom physical guest memory alloator.
+ * Accelerators with unusual needs may need this. Hopefully, we can
+ * get rid of it eventually.
+ */
+void phys_mem_set_alloc(void *(*alloc)(ram_addr_t))
+{
+ phys_mem_alloc = alloc;
+}
+
static uint16_t phys_section_add(MemoryRegionSection *section)
{
/* The physical section number is ORed with a page-aligned
@@ -1124,12 +1136,7 @@
#endif
}
if (!new_block->host) {
- if (kvm_enabled()) {
- /* some s390/kvm configurations have special constraints */
- new_block->host = kvm_ram_alloc(size);
- } else {
- new_block->host = qemu_anon_ram_alloc(size);
- }
+ new_block->host = phys_mem_alloc(size);
memory_try_enable_merging(new_block->host, size);
}
}
diff --git a/include/exec/exec-all.h b/include/exec/exec-all.h
index beb4149..77242e2 100644
--- a/include/exec/exec-all.h
+++ b/include/exec/exec-all.h
@@ -368,6 +368,8 @@
#if !defined(CONFIG_USER_ONLY)
+void phys_mem_set_alloc(void *(*alloc)(ram_addr_t));
+
struct MemoryRegion *iotlb_to_region(hwaddr index);
bool io_mem_read(struct MemoryRegion *mr, hwaddr addr,
uint64_t *pvalue, unsigned size);
diff --git a/include/sysemu/kvm.h b/include/sysemu/kvm.h
index 8e76685..9bbe3db 100644
--- a/include/sysemu/kvm.h
+++ b/include/sysemu/kvm.h
@@ -161,11 +161,6 @@
#ifdef NEED_CPU_H
-#if !defined(CONFIG_USER_ONLY)
-void *kvm_ram_alloc(ram_addr_t size);
-void *kvm_arch_ram_alloc(ram_addr_t size);
-#endif
-
void kvm_setup_guest_memory(void *start, size_t size);
void kvm_flush_coalesced_mmio_buffer(void);
diff --git a/kvm-all.c b/kvm-all.c
index c29a015..b87215c 100644
--- a/kvm-all.c
+++ b/kvm-all.c
@@ -1812,19 +1812,6 @@
return kvm_state->intx_set_mask;
}
-void *kvm_ram_alloc(ram_addr_t size)
-{
-#ifdef TARGET_S390X
- void *mem;
-
- mem = kvm_arch_ram_alloc(size);
- if (mem) {
- return mem;
- }
-#endif
- return qemu_anon_ram_alloc(size);
-}
-
void kvm_setup_guest_memory(void *start, size_t size)
{
#ifdef CONFIG_VALGRIND_H
diff --git a/target-s390x/kvm.c b/target-s390x/kvm.c
index 185c8f5..0b75164 100644
--- a/target-s390x/kvm.c
+++ b/target-s390x/kvm.c
@@ -93,9 +93,15 @@
static int cap_sync_regs;
+static void *legacy_s390_alloc(ram_addr_t size);
+
int kvm_arch_init(KVMState *s)
{
cap_sync_regs = kvm_check_extension(s, KVM_CAP_SYNC_REGS);
+ if (!kvm_check_extension(s, KVM_CAP_S390_GMAP)
+ || !kvm_check_extension(s, KVM_CAP_S390_COW)) {
+ phys_mem_set_alloc(legacy_s390_alloc);
+ }
return 0;
}
@@ -333,17 +339,6 @@
return mem;
}
-void *kvm_arch_ram_alloc(ram_addr_t size)
-{
- /* Can we use the standard allocation ? */
- if (kvm_check_extension(kvm_state, KVM_CAP_S390_GMAP) &&
- kvm_check_extension(kvm_state, KVM_CAP_S390_COW)) {
- return NULL;
- } else {
- return legacy_s390_alloc(size);
- }
-}
-
int kvm_arch_insert_sw_breakpoint(CPUState *cs, struct kvm_sw_breakpoint *bp)
{
static const uint8_t diag_501[] = {0x83, 0x24, 0x05, 0x01};
