scsi: introduce scsi_req_data
This abstracts calling the command_complete callback, reducing churn
in the following patches.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
diff --git a/hw/scsi-bus.c b/hw/scsi-bus.c
index 0fd85fc..191cbab 100644
--- a/hw/scsi-bus.c
+++ b/hw/scsi-bus.c
@@ -495,6 +495,17 @@
return names[cmd];
}
+/* Called by the devices when data is ready for the HBA. The HBA should
+ start a DMA operation to read or fill the device's data buffer.
+ Once it completes, calling one of req->dev->info->read_data or
+ req->dev->info->write_data (depending on the direction of the
+ transfer) will restart I/O. */
+void scsi_req_data(SCSIRequest *req, int len)
+{
+ trace_scsi_req_data(req->dev->id, req->lun, req->tag, len);
+ req->bus->complete(req->bus, SCSI_REASON_DATA, req->tag, len);
+}
+
void scsi_req_print(SCSIRequest *req)
{
FILE *fp = stderr;
diff --git a/hw/scsi-disk.c b/hw/scsi-disk.c
index 397b9d6..741cf39 100644
--- a/hw/scsi-disk.c
+++ b/hw/scsi-disk.c
@@ -170,7 +170,7 @@
n = r->iov.iov_len / 512;
r->sector += n;
r->sector_count -= n;
- r->req.bus->complete(r->req.bus, SCSI_REASON_DATA, r->req.tag, r->iov.iov_len);
+ scsi_req_data(&r->req, r->iov.iov_len);
}
@@ -182,7 +182,7 @@
if (r->sector_count == (uint32_t)-1) {
DPRINTF("Read buf_len=%zd\n", r->iov.iov_len);
r->sector_count = 0;
- r->req.bus->complete(r->req.bus, SCSI_REASON_DATA, r->req.tag, r->iov.iov_len);
+ scsi_req_data(&r->req, r->iov.iov_len);
return;
}
DPRINTF("Read sector_count=%d\n", r->sector_count);
@@ -245,7 +245,7 @@
vm_stop(VMSTOP_DISKFULL);
} else {
if (type == SCSI_REQ_STATUS_RETRY_READ) {
- r->req.bus->complete(r->req.bus, SCSI_REASON_DATA, r->req.tag, 0);
+ scsi_req_data(&r->req, 0);
}
scsi_command_complete(r, CHECK_CONDITION,
HARDWARE_ERROR);
@@ -281,7 +281,7 @@
}
r->iov.iov_len = len;
DPRINTF("Write complete tag=0x%x more=%d\n", r->req.tag, len);
- r->req.bus->complete(r->req.bus, SCSI_REASON_DATA, r->req.tag, len);
+ scsi_req_data(&r->req, len);
}
}
diff --git a/hw/scsi-generic.c b/hw/scsi-generic.c
index 102f1da..e4f1f30 100644
--- a/hw/scsi-generic.c
+++ b/hw/scsi-generic.c
@@ -175,7 +175,7 @@
if (len == 0) {
scsi_command_complete(r, 0);
} else {
- r->req.bus->complete(r->req.bus, SCSI_REASON_DATA, r->req.tag, len);
+ scsi_req_data(&r->req, len);
}
}
@@ -212,7 +212,7 @@
DPRINTF("Sense: %d %d %d %d %d %d %d %d\n",
r->buf[0], r->buf[1], r->buf[2], r->buf[3],
r->buf[4], r->buf[5], r->buf[6], r->buf[7]);
- r->req.bus->complete(r->req.bus, SCSI_REASON_DATA, r->req.tag, s->senselen);
+ scsi_req_data(&r->req, s->senselen);
return;
}
@@ -263,7 +263,7 @@
if (r->len == 0) {
r->len = r->buflen;
- r->req.bus->complete(r->req.bus, SCSI_REASON_DATA, r->req.tag, r->len);
+ scsi_req_data(&r->req, r->len);
return 0;
}
diff --git a/hw/scsi.h b/hw/scsi.h
index d3b5d56..7c09f32 100644
--- a/hw/scsi.h
+++ b/hw/scsi.h
@@ -105,6 +105,7 @@
int scsi_req_parse(SCSIRequest *req, uint8_t *buf);
void scsi_req_print(SCSIRequest *req);
+void scsi_req_data(SCSIRequest *req, int len);
void scsi_req_complete(SCSIRequest *req);
#endif
diff --git a/trace-events b/trace-events
index b11b71d..0340eb2 100644
--- a/trace-events
+++ b/trace-events
@@ -207,6 +207,7 @@
# hw/scsi-bus.c
disable scsi_req_alloc(int target, int lun, int tag) "target %d lun %d tag %d"
+disable scsi_req_data(int target, int lun, int tag, int len) "target %d lun %d tag %d len %d"
disable scsi_req_dequeue(int target, int lun, int tag) "target %d lun %d tag %d"
disable scsi_req_parsed(int target, int lun, int tag, int cmd, int mode, int xfer, uint64_t lba) "target %d lun %d tag %d command %d dir %d length %d lba %"PRIu64""
disable scsi_req_parse_bad(int target, int lun, int tag, int cmd) "target %d lun %d tag %d command %d"
