| /* |
| * SD Association Host Standard Specification v2.0 controller emulation |
| * |
| * Copyright (c) 2011 Samsung Electronics Co., Ltd. |
| * Mitsyanko Igor <i.mitsyanko@samsung.com> |
| * Peter A.G. Crosthwaite <peter.crosthwaite@petalogix.com> |
| * |
| * Based on MMC controller for Samsung S5PC1xx-based board emulation |
| * by Alexey Merkulov and Vladimir Monakhov. |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. |
| * See the GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License along |
| * with this program; if not, see <http://www.gnu.org/licenses/>. |
| */ |
| |
| #ifndef SDHCI_H |
| #define SDHCI_H |
| |
| #include "qemu-common.h" |
| #include "hw/sysbus.h" |
| #include "hw/sd.h" |
| |
| /* R/W SDMA System Address register 0x0 */ |
| #define SDHC_SYSAD 0x00 |
| |
| /* R/W Host DMA Buffer Boundary and Transfer Block Size Register 0x0 */ |
| #define SDHC_BLKSIZE 0x04 |
| |
| /* R/W Blocks count for current transfer 0x0 */ |
| #define SDHC_BLKCNT 0x06 |
| |
| /* R/W Command Argument Register 0x0 */ |
| #define SDHC_ARGUMENT 0x08 |
| |
| /* R/W Transfer Mode Setting Register 0x0 */ |
| #define SDHC_TRNMOD 0x0C |
| #define SDHC_TRNS_DMA 0x0001 |
| #define SDHC_TRNS_BLK_CNT_EN 0x0002 |
| #define SDHC_TRNS_ACMD12 0x0004 |
| #define SDHC_TRNS_READ 0x0010 |
| #define SDHC_TRNS_MULTI 0x0020 |
| |
| /* R/W Command Register 0x0 */ |
| #define SDHC_CMDREG 0x0E |
| #define SDHC_CMD_RSP_WITH_BUSY (3 << 0) |
| #define SDHC_CMD_DATA_PRESENT (1 << 5) |
| #define SDHC_CMD_SUSPEND (1 << 6) |
| #define SDHC_CMD_RESUME (1 << 7) |
| #define SDHC_CMD_ABORT ((1 << 6)|(1 << 7)) |
| #define SDHC_CMD_TYPE_MASK ((1 << 6)|(1 << 7)) |
| #define SDHC_COMMAND_TYPE(x) ((x) & SDHC_CMD_TYPE_MASK) |
| |
| /* ROC Response Register 0 0x0 */ |
| #define SDHC_RSPREG0 0x10 |
| /* ROC Response Register 1 0x0 */ |
| #define SDHC_RSPREG1 0x14 |
| /* ROC Response Register 2 0x0 */ |
| #define SDHC_RSPREG2 0x18 |
| /* ROC Response Register 3 0x0 */ |
| #define SDHC_RSPREG3 0x1C |
| |
| /* R/W Buffer Data Register 0x0 */ |
| #define SDHC_BDATA 0x20 |
| |
| /* R/ROC Present State Register 0x000A0000 */ |
| #define SDHC_PRNSTS 0x24 |
| #define SDHC_CMD_INHIBIT 0x00000001 |
| #define SDHC_DATA_INHIBIT 0x00000002 |
| #define SDHC_DAT_LINE_ACTIVE 0x00000004 |
| #define SDHC_DOING_WRITE 0x00000100 |
| #define SDHC_DOING_READ 0x00000200 |
| #define SDHC_SPACE_AVAILABLE 0x00000400 |
| #define SDHC_DATA_AVAILABLE 0x00000800 |
| #define SDHC_CARD_PRESENT 0x00010000 |
| #define SDHC_CARD_DETECT 0x00040000 |
| #define SDHC_WRITE_PROTECT 0x00080000 |
| #define TRANSFERRING_DATA(x) \ |
| ((x) & (SDHC_DOING_READ | SDHC_DOING_WRITE)) |
| |
| /* R/W Host control Register 0x0 */ |
| #define SDHC_HOSTCTL 0x28 |
| #define SDHC_CTRL_DMA_CHECK_MASK 0x18 |
| #define SDHC_CTRL_SDMA 0x00 |
| #define SDHC_CTRL_ADMA1_32 0x08 |
| #define SDHC_CTRL_ADMA2_32 0x10 |
| #define SDHC_CTRL_ADMA2_64 0x18 |
| #define SDHC_DMA_TYPE(x) ((x) & SDHC_CTRL_DMA_CHECK_MASK) |
| |
| /* R/W Power Control Register 0x0 */ |
| #define SDHC_PWRCON 0x29 |
| #define SDHC_POWER_ON (1 << 0) |
| |
| /* R/W Block Gap Control Register 0x0 */ |
| #define SDHC_BLKGAP 0x2A |
| #define SDHC_STOP_AT_GAP_REQ 0x01 |
| #define SDHC_CONTINUE_REQ 0x02 |
| |
| /* R/W WakeUp Control Register 0x0 */ |
| #define SDHC_WAKCON 0x2B |
| #define SDHC_WKUP_ON_INS (1 << 1) |
| #define SDHC_WKUP_ON_RMV (1 << 2) |
| |
| /* CLKCON */ |
| #define SDHC_CLKCON 0x2C |
| #define SDHC_CLOCK_INT_STABLE 0x0002 |
| #define SDHC_CLOCK_INT_EN 0x0001 |
| #define SDHC_CLOCK_SDCLK_EN (1 << 2) |
| #define SDHC_CLOCK_CHK_MASK 0x0007 |
| #define SDHC_CLOCK_IS_ON(x) \ |
| (((x) & SDHC_CLOCK_CHK_MASK) == SDHC_CLOCK_CHK_MASK) |
| |
| /* R/W Timeout Control Register 0x0 */ |
| #define SDHC_TIMEOUTCON 0x2E |
| |
| /* R/W Software Reset Register 0x0 */ |
| #define SDHC_SWRST 0x2F |
| #define SDHC_RESET_ALL 0x01 |
| #define SDHC_RESET_CMD 0x02 |
| #define SDHC_RESET_DATA 0x04 |
| |
| /* ROC/RW1C Normal Interrupt Status Register 0x0 */ |
| #define SDHC_NORINTSTS 0x30 |
| #define SDHC_NIS_ERR 0x8000 |
| #define SDHC_NIS_CMDCMP 0x0001 |
| #define SDHC_NIS_TRSCMP 0x0002 |
| #define SDHC_NIS_BLKGAP 0x0004 |
| #define SDHC_NIS_DMA 0x0008 |
| #define SDHC_NIS_WBUFRDY 0x0010 |
| #define SDHC_NIS_RBUFRDY 0x0020 |
| #define SDHC_NIS_INSERT 0x0040 |
| #define SDHC_NIS_REMOVE 0x0080 |
| #define SDHC_NIS_CARDINT 0x0100 |
| |
| /* ROC/RW1C Error Interrupt Status Register 0x0 */ |
| #define SDHC_ERRINTSTS 0x32 |
| #define SDHC_EIS_CMDTIMEOUT 0x0001 |
| #define SDHC_EIS_BLKGAP 0x0004 |
| #define SDHC_EIS_CMDIDX 0x0008 |
| #define SDHC_EIS_CMD12ERR 0x0100 |
| #define SDHC_EIS_ADMAERR 0x0200 |
| |
| /* R/W Normal Interrupt Status Enable Register 0x0 */ |
| #define SDHC_NORINTSTSEN 0x34 |
| #define SDHC_NISEN_CMDCMP 0x0001 |
| #define SDHC_NISEN_TRSCMP 0x0002 |
| #define SDHC_NISEN_DMA 0x0008 |
| #define SDHC_NISEN_WBUFRDY 0x0010 |
| #define SDHC_NISEN_RBUFRDY 0x0020 |
| #define SDHC_NISEN_INSERT 0x0040 |
| #define SDHC_NISEN_REMOVE 0x0080 |
| #define SDHC_NISEN_CARDINT 0x0100 |
| |
| /* R/W Error Interrupt Status Enable Register 0x0 */ |
| #define SDHC_ERRINTSTSEN 0x36 |
| #define SDHC_EISEN_CMDTIMEOUT 0x0001 |
| #define SDHC_EISEN_BLKGAP 0x0004 |
| #define SDHC_EISEN_CMDIDX 0x0008 |
| #define SDHC_EISEN_ADMAERR 0x0200 |
| |
| /* R/W Normal Interrupt Signal Enable Register 0x0 */ |
| #define SDHC_NORINTSIGEN 0x38 |
| #define SDHC_NORINTSIG_INSERT (1 << 6) |
| #define SDHC_NORINTSIG_REMOVE (1 << 7) |
| |
| /* R/W Error Interrupt Signal Enable Register 0x0 */ |
| #define SDHC_ERRINTSIGEN 0x3A |
| |
| /* ROC Auto CMD12 error status register 0x0 */ |
| #define SDHC_ACMD12ERRSTS 0x3C |
| |
| /* HWInit Capabilities Register 0x05E80080 */ |
| #define SDHC_CAPAREG 0x40 |
| #define SDHC_CAN_DO_DMA 0x00400000 |
| #define SDHC_CAN_DO_ADMA2 0x00080000 |
| #define SDHC_CAN_DO_ADMA1 0x00100000 |
| #define SDHC_64_BIT_BUS_SUPPORT (1 << 28) |
| #define SDHC_CAPAB_BLOCKSIZE(x) (((x) >> 16) & 0x3) |
| |
| /* HWInit Maximum Current Capabilities Register 0x0 */ |
| #define SDHC_MAXCURR 0x48 |
| |
| /* W Force Event Auto CMD12 Error Interrupt Register 0x0000 */ |
| #define SDHC_FEAER 0x50 |
| /* W Force Event Error Interrupt Register Error Interrupt 0x0000 */ |
| #define SDHC_FEERR 0x52 |
| |
| /* R/W ADMA Error Status Register 0x00 */ |
| #define SDHC_ADMAERR 0x54 |
| #define SDHC_ADMAERR_LENGTH_MISMATCH (1 << 2) |
| #define SDHC_ADMAERR_STATE_ST_STOP (0 << 0) |
| #define SDHC_ADMAERR_STATE_ST_FDS (1 << 0) |
| #define SDHC_ADMAERR_STATE_ST_TFR (3 << 0) |
| #define SDHC_ADMAERR_STATE_MASK (3 << 0) |
| |
| /* R/W ADMA System Address Register 0x00 */ |
| #define SDHC_ADMASYSADDR 0x58 |
| #define SDHC_ADMA_ATTR_SET_LEN (1 << 4) |
| #define SDHC_ADMA_ATTR_ACT_TRAN (1 << 5) |
| #define SDHC_ADMA_ATTR_ACT_LINK (3 << 4) |
| #define SDHC_ADMA_ATTR_INT (1 << 2) |
| #define SDHC_ADMA_ATTR_END (1 << 1) |
| #define SDHC_ADMA_ATTR_VALID (1 << 0) |
| #define SDHC_ADMA_ATTR_ACT_MASK ((1 << 4)|(1 << 5)) |
| |
| /* Slot interrupt status */ |
| #define SDHC_SLOT_INT_STATUS 0xFC |
| |
| /* HWInit Host Controller Version Register 0x0401 */ |
| #define SDHC_HCVER 0xFE |
| #define SD_HOST_SPECv2_VERS 0x2401 |
| |
| #define SDHC_REGISTERS_MAP_SIZE 0x100 |
| #define SDHC_INSERTION_DELAY (get_ticks_per_sec()) |
| #define SDHC_TRANSFER_DELAY 100 |
| #define SDHC_ADMA_DESCS_PER_DELAY 5 |
| #define SDHC_CMD_RESPONSE (3 << 0) |
| |
| enum { |
| sdhc_not_stopped = 0, /* normal SDHC state */ |
| sdhc_gap_read = 1, /* SDHC stopped at block gap during read operation */ |
| sdhc_gap_write = 2 /* SDHC stopped at block gap during write operation */ |
| }; |
| |
| /* SD/MMC host controller state */ |
| typedef struct SDHCIState { |
| SysBusDevice busdev; |
| SDState *card; |
| MemoryRegion iomem; |
| |
| QEMUTimer *insert_timer; /* timer for 'changing' sd card. */ |
| QEMUTimer *transfer_timer; |
| qemu_irq eject_cb; |
| qemu_irq ro_cb; |
| qemu_irq irq; |
| |
| uint32_t sdmasysad; /* SDMA System Address register */ |
| uint16_t blksize; /* Host DMA Buff Boundary and Transfer BlkSize Reg */ |
| uint16_t blkcnt; /* Blocks count for current transfer */ |
| uint32_t argument; /* Command Argument Register */ |
| uint16_t trnmod; /* Transfer Mode Setting Register */ |
| uint16_t cmdreg; /* Command Register */ |
| uint32_t rspreg[4]; /* Response Registers 0-3 */ |
| uint32_t prnsts; /* Present State Register */ |
| uint8_t hostctl; /* Host Control Register */ |
| uint8_t pwrcon; /* Power control Register */ |
| uint8_t blkgap; /* Block Gap Control Register */ |
| uint8_t wakcon; /* WakeUp Control Register */ |
| uint16_t clkcon; /* Clock control Register */ |
| uint8_t timeoutcon; /* Timeout Control Register */ |
| uint8_t admaerr; /* ADMA Error Status Register */ |
| uint16_t norintsts; /* Normal Interrupt Status Register */ |
| uint16_t errintsts; /* Error Interrupt Status Register */ |
| uint16_t norintstsen; /* Normal Interrupt Status Enable Register */ |
| uint16_t errintstsen; /* Error Interrupt Status Enable Register */ |
| uint16_t norintsigen; /* Normal Interrupt Signal Enable Register */ |
| uint16_t errintsigen; /* Error Interrupt Signal Enable Register */ |
| uint16_t acmd12errsts; /* Auto CMD12 error status register */ |
| uint64_t admasysaddr; /* ADMA System Address Register */ |
| |
| uint32_t capareg; /* Capabilities Register */ |
| uint32_t maxcurr; /* Maximum Current Capabilities Register */ |
| uint8_t *fifo_buffer; /* SD host i/o FIFO buffer */ |
| uint32_t buf_maxsz; |
| uint16_t data_count; /* current element in FIFO buffer */ |
| uint8_t stopped_state;/* Current SDHC state */ |
| /* Buffer Data Port Register - virtual access point to R and W buffers */ |
| /* Software Reset Register - always reads as 0 */ |
| /* Force Event Auto CMD12 Error Interrupt Reg - write only */ |
| /* Force Event Error Interrupt Register- write only */ |
| /* RO Host Controller Version Register always reads as 0x2401 */ |
| } SDHCIState; |
| |
| typedef struct SDHCIClass { |
| SysBusDeviceClass busdev_class; |
| |
| void (*reset)(SDHCIState *s); |
| uint32_t (*mem_read)(SDHCIState *s, unsigned int offset, unsigned size); |
| void (*mem_write)(SDHCIState *s, unsigned int offset, uint32_t value, |
| unsigned size); |
| void (*send_command)(SDHCIState *s); |
| bool (*can_issue_command)(SDHCIState *s); |
| void (*data_transfer)(SDHCIState *s); |
| void (*end_data_transfer)(SDHCIState *s); |
| void (*do_sdma_single)(SDHCIState *s); |
| void (*do_sdma_multi)(SDHCIState *s); |
| void (*do_adma)(SDHCIState *s); |
| void (*read_block_from_card)(SDHCIState *s); |
| void (*write_block_to_card)(SDHCIState *s); |
| uint32_t (*bdata_read)(SDHCIState *s, unsigned size); |
| void (*bdata_write)(SDHCIState *s, uint32_t value, unsigned size); |
| } SDHCIClass; |
| |
| extern const VMStateDescription sdhci_vmstate; |
| |
| #define TYPE_SDHCI "generic-sdhci" |
| #define SDHCI(obj) \ |
| OBJECT_CHECK(SDHCIState, (obj), TYPE_SDHCI) |
| #define SDHCI_CLASS(klass) \ |
| OBJECT_CLASS_CHECK(SDHCIClass, (klass), TYPE_SDHCI) |
| #define SDHCI_GET_CLASS(obj) \ |
| OBJECT_GET_CLASS(SDHCIClass, (obj), TYPE_SDHCI) |
| |
| #endif /* SDHCI_H */ |
