diff --git a/hw/vfio/pci-quirks.c b/hw/vfio/pci-quirks.c
index 9b51a64..3717e01 100644
--- a/hw/vfio/pci-quirks.c
+++ b/hw/vfio/pci-quirks.c
@@ -19,12 +19,8 @@
 /* Use uin32_t for vendor & device so PCI_ANY_ID expands and cannot match hw */
 static bool vfio_pci_is(VFIOPCIDevice *vdev, uint32_t vendor, uint32_t device)
 {
-    PCIDevice *pdev = &vdev->pdev;
-
-    return (vendor == PCI_ANY_ID ||
-            vendor == pci_get_word(pdev->config + PCI_VENDOR_ID)) &&
-           (device == PCI_ANY_ID ||
-            device == pci_get_word(pdev->config + PCI_DEVICE_ID));
+    return (vendor == PCI_ANY_ID || vendor == vdev->vendor_id) &&
+           (device == PCI_ANY_ID || device == vdev->device_id);
 }
 
 static bool vfio_is_vga(VFIOPCIDevice *vdev)
@@ -1178,15 +1174,9 @@
 
 void vfio_setup_resetfn_quirk(VFIOPCIDevice *vdev)
 {
-    PCIDevice *pdev = &vdev->pdev;
-    uint16_t vendor, device;
-
-    vendor = pci_get_word(pdev->config + PCI_VENDOR_ID);
-    device = pci_get_word(pdev->config + PCI_DEVICE_ID);
-
-    switch (vendor) {
+    switch (vdev->vendor_id) {
     case 0x1002:
-        switch (device) {
+        switch (vdev->device_id) {
         /* Bonaire */
         case 0x6649: /* Bonaire [FirePro W5100] */
         case 0x6650:
diff --git a/hw/vfio/pci.c b/hw/vfio/pci.c
index c60a6a7..b944165 100644
--- a/hw/vfio/pci.c
+++ b/hw/vfio/pci.c
@@ -1221,17 +1221,14 @@
      * specific quirk if the device is known or we have a broken configuration.
      */
     if (msix->pba_offset >= vdev->bars[msix->pba_bar].region.size) {
-        PCIDevice *pdev = &vdev->pdev;
-        uint16_t vendor = pci_get_word(pdev->config + PCI_VENDOR_ID);
-        uint16_t device = pci_get_word(pdev->config + PCI_DEVICE_ID);
-
         /*
          * Chelsio T5 Virtual Function devices are encoded as 0x58xx for T5
          * adapters. The T5 hardware returns an incorrect value of 0x8000 for
          * the VF PBA offset while the BAR itself is only 8k. The correct value
          * is 0x1000, so we hard code that here.
          */
-        if (vendor == PCI_VENDOR_ID_CHELSIO && (device & 0xff00) == 0x5800) {
+        if (vdev->vendor_id == PCI_VENDOR_ID_CHELSIO &&
+            (vdev->device_id & 0xff00) == 0x5800) {
             msix->pba_offset = 0x1000;
         } else {
             error_report("vfio: Hardware reports invalid configuration, "
@@ -2407,6 +2404,9 @@
     /* QEMU can choose to expose the ROM or not */
     memset(vdev->emulated_config_bits + PCI_ROM_ADDRESS, 0xff, 4);
 
+    vdev->vendor_id = pci_get_word(pdev->config + PCI_VENDOR_ID);
+    vdev->device_id = pci_get_word(pdev->config + PCI_DEVICE_ID);
+
     /* QEMU can change multi-function devices to single function, or reverse */
     vdev->emulated_config_bits[PCI_HEADER_TYPE] =
                                               PCI_HEADER_TYPE_MULTI_FUNCTION;
diff --git a/hw/vfio/pci.h b/hw/vfio/pci.h
index e695952..797e083 100644
--- a/hw/vfio/pci.h
+++ b/hw/vfio/pci.h
@@ -116,6 +116,8 @@
     EventNotifier err_notifier;
     EventNotifier req_notifier;
     int (*resetfn)(struct VFIOPCIDevice *);
+    uint16_t vendor_id;
+    uint16_t device_id;
     uint32_t features;
 #define VFIO_FEATURE_ENABLE_VGA_BIT 0
 #define VFIO_FEATURE_ENABLE_VGA (1 << VFIO_FEATURE_ENABLE_VGA_BIT)