hw/sd/pxa2xx_mmci.c - qemu-android - Git at Google

 /*
  * Intel XScale PXA255/270 MultiMediaCard/SD/SDIO Controller emulation.
  *
  * Copyright (c) 2006 Openedhand Ltd.
  * Written by Andrzej Zaborowski <balrog@zabor.org>
  *
  * This code is licensed under the GPLv2.
  *
  * Contributions after 2012-01-13 are licensed under the terms of the
  * GNU GPL, version 2 or (at your option) any later version.
  */

 #include "qemu/osdep.h"
 #include "qapi/error.h"
 #include "hw/hw.h"
 #include "hw/sysbus.h"
 #include "hw/arm/pxa.h"
 #include "hw/sd/sd.h"
 #include "hw/qdev.h"
 #include "hw/qdev-properties.h"
 #include "qemu/error-report.h"

 #define TYPE_PXA2XX_MMCI "pxa2xx-mmci"
 #define PXA2XX_MMCI(obj) OBJECT_CHECK(PXA2xxMMCIState, (obj), TYPE_PXA2XX_MMCI)

 #define TYPE_PXA2XX_MMCI_BUS "pxa2xx-mmci-bus"
 #define PXA2XX_MMCI_BUS(obj) OBJECT_CHECK(SDBus, (obj), TYPE_PXA2XX_MMCI_BUS)

 struct PXA2xxMMCIState {
     SysBusDevice parent_obj;

     MemoryRegion iomem;
     qemu_irq irq;
     qemu_irq rx_dma;
     qemu_irq tx_dma;
     qemu_irq inserted;
     qemu_irq readonly;

     BlockBackend *blk;
     SDBus sdbus;

     uint32_t status;
     uint32_t clkrt;
     uint32_t spi;
     uint32_t cmdat;
     uint32_t resp_tout;
     uint32_t read_tout;
     int32_t blklen;
     int32_t numblk;
     uint32_t intmask;
     uint32_t intreq;
     int32_t cmd;
     uint32_t arg;

     int32_t active;
     int32_t bytesleft;
     uint8_t tx_fifo[64];
     uint32_t tx_start;
     uint32_t tx_len;
     uint8_t rx_fifo[32];
     uint32_t rx_start;
     uint32_t rx_len;
     uint16_t resp_fifo[9];
     uint32_t resp_len;

     int32_t cmdreq;
 };

 static bool pxa2xx_mmci_vmstate_validate(void *opaque, int version_id)
 {
     PXA2xxMMCIState *s = opaque;

     return s->tx_start < ARRAY_SIZE(s->tx_fifo)
         && s->rx_start < ARRAY_SIZE(s->rx_fifo)
         && s->tx_len <= ARRAY_SIZE(s->tx_fifo)
         && s->rx_len <= ARRAY_SIZE(s->rx_fifo)
         && s->resp_len <= ARRAY_SIZE(s->resp_fifo);
 }


 static const VMStateDescription vmstate_pxa2xx_mmci = {
     .name = "pxa2xx-mmci",
     .version_id = 2,
     .minimum_version_id = 2,
     .fields = (VMStateField[]) {
         VMSTATE_UINT32(status, PXA2xxMMCIState),
         VMSTATE_UINT32(clkrt, PXA2xxMMCIState),
         VMSTATE_UINT32(spi, PXA2xxMMCIState),
         VMSTATE_UINT32(cmdat, PXA2xxMMCIState),
         VMSTATE_UINT32(resp_tout, PXA2xxMMCIState),
         VMSTATE_UINT32(read_tout, PXA2xxMMCIState),
         VMSTATE_INT32(blklen, PXA2xxMMCIState),
         VMSTATE_INT32(numblk, PXA2xxMMCIState),
         VMSTATE_UINT32(intmask, PXA2xxMMCIState),
         VMSTATE_UINT32(intreq, PXA2xxMMCIState),
         VMSTATE_INT32(cmd, PXA2xxMMCIState),
         VMSTATE_UINT32(arg, PXA2xxMMCIState),
         VMSTATE_INT32(cmdreq, PXA2xxMMCIState),
         VMSTATE_INT32(active, PXA2xxMMCIState),
         VMSTATE_INT32(bytesleft, PXA2xxMMCIState),
         VMSTATE_UINT32(tx_start, PXA2xxMMCIState),
         VMSTATE_UINT32(tx_len, PXA2xxMMCIState),
         VMSTATE_UINT32(rx_start, PXA2xxMMCIState),
         VMSTATE_UINT32(rx_len, PXA2xxMMCIState),
         VMSTATE_UINT32(resp_len, PXA2xxMMCIState),
         VMSTATE_VALIDATE("fifo size incorrect", pxa2xx_mmci_vmstate_validate),
         VMSTATE_UINT8_ARRAY(tx_fifo, PXA2xxMMCIState, 64),
         VMSTATE_UINT8_ARRAY(rx_fifo, PXA2xxMMCIState, 32),
         VMSTATE_UINT16_ARRAY(resp_fifo, PXA2xxMMCIState, 9),
         VMSTATE_END_OF_LIST()
     }
 };

 #define MMC_STRPCL	0x00	/* MMC Clock Start/Stop register */
 #define MMC_STAT	0x04	/* MMC Status register */
 #define MMC_CLKRT	0x08	/* MMC Clock Rate register */
 #define MMC_SPI		0x0c	/* MMC SPI Mode register */
 #define MMC_CMDAT	0x10	/* MMC Command/Data register */
 #define MMC_RESTO	0x14	/* MMC Response Time-Out register */
 #define MMC_RDTO	0x18	/* MMC Read Time-Out register */
 #define MMC_BLKLEN	0x1c	/* MMC Block Length register */
 #define MMC_NUMBLK	0x20	/* MMC Number of Blocks register */
 #define MMC_PRTBUF	0x24	/* MMC Buffer Partly Full register */
 #define MMC_I_MASK	0x28	/* MMC Interrupt Mask register */
 #define MMC_I_REG	0x2c	/* MMC Interrupt Request register */
 #define MMC_CMD		0x30	/* MMC Command register */
 #define MMC_ARGH	0x34	/* MMC Argument High register */
 #define MMC_ARGL	0x38	/* MMC Argument Low register */
 #define MMC_RES		0x3c	/* MMC Response FIFO */
 #define MMC_RXFIFO	0x40	/* MMC Receive FIFO */
 #define MMC_TXFIFO	0x44	/* MMC Transmit FIFO */
 #define MMC_RDWAIT	0x48	/* MMC RD_WAIT register */
 #define MMC_BLKS_REM	0x4c	/* MMC Blocks Remaining register */

 /* Bitfield masks */
 #define STRPCL_STOP_CLK	(1 << 0)
 #define STRPCL_STRT_CLK	(1 << 1)
 #define STAT_TOUT_RES	(1 << 1)
 #define STAT_CLK_EN	(1 << 8)
 #define STAT_DATA_DONE	(1 << 11)
 #define STAT_PRG_DONE	(1 << 12)
 #define STAT_END_CMDRES	(1 << 13)
 #define SPI_SPI_MODE	(1 << 0)
 #define CMDAT_RES_TYPE	(3 << 0)
 #define CMDAT_DATA_EN	(1 << 2)
 #define CMDAT_WR_RD	(1 << 3)
 #define CMDAT_DMA_EN	(1 << 7)
 #define CMDAT_STOP_TRAN	(1 << 10)
 #define INT_DATA_DONE	(1 << 0)
 #define INT_PRG_DONE	(1 << 1)
 #define INT_END_CMD	(1 << 2)
 #define INT_STOP_CMD	(1 << 3)
 #define INT_CLK_OFF	(1 << 4)
 #define INT_RXFIFO_REQ	(1 << 5)
 #define INT_TXFIFO_REQ	(1 << 6)
 #define INT_TINT	(1 << 7)
 #define INT_DAT_ERR	(1 << 8)
 #define INT_RES_ERR	(1 << 9)
 #define INT_RD_STALLED	(1 << 10)
 #define INT_SDIO_INT	(1 << 11)
 #define INT_SDIO_SACK	(1 << 12)
 #define PRTBUF_PRT_BUF	(1 << 0)

 /* Route internal interrupt lines to the global IC and DMA */
 static void pxa2xx_mmci_int_update(PXA2xxMMCIState *s)
 {
     uint32_t mask = s->intmask;
     if (s->cmdat & CMDAT_DMA_EN) {
         mask |= INT_RXFIFO_REQ | INT_TXFIFO_REQ;

         qemu_set_irq(s->rx_dma, !!(s->intreq & INT_RXFIFO_REQ));
         qemu_set_irq(s->tx_dma, !!(s->intreq & INT_TXFIFO_REQ));
     }

     qemu_set_irq(s->irq, !!(s->intreq & ~mask));
 }

 static void pxa2xx_mmci_fifo_update(PXA2xxMMCIState *s)
 {
     if (!s->active)
         return;

     if (s->cmdat & CMDAT_WR_RD) {
         while (s->bytesleft && s->tx_len) {
             sdbus_write_data(&s->sdbus, s->tx_fifo[s->tx_start++]);
             s->tx_start &= 0x1f;
             s->tx_len --;
             s->bytesleft --;
         }
         if (s->bytesleft)
             s->intreq |= INT_TXFIFO_REQ;
     } else
         while (s->bytesleft && s->rx_len < 32) {
             s->rx_fifo[(s->rx_start + (s->rx_len ++)) & 0x1f] =
                 sdbus_read_data(&s->sdbus);
             s->bytesleft --;
             s->intreq |= INT_RXFIFO_REQ;
         }

     if (!s->bytesleft) {
         s->active = 0;
         s->intreq |= INT_DATA_DONE;
         s->status |= STAT_DATA_DONE;

         if (s->cmdat & CMDAT_WR_RD) {
             s->intreq |= INT_PRG_DONE;
             s->status |= STAT_PRG_DONE;
         }
     }

     pxa2xx_mmci_int_update(s);
 }

 static void pxa2xx_mmci_wakequeues(PXA2xxMMCIState *s)
 {
     int rsplen, i;
     SDRequest request;
     uint8_t response[16];

     s->active = 1;
     s->rx_len = 0;
     s->tx_len = 0;
     s->cmdreq = 0;

     request.cmd = s->cmd;
     request.arg = s->arg;
     request.crc = 0;	/* FIXME */

     rsplen = sdbus_do_command(&s->sdbus, &request, response);
     s->intreq |= INT_END_CMD;

     memset(s->resp_fifo, 0, sizeof(s->resp_fifo));
     switch (s->cmdat & CMDAT_RES_TYPE) {
 #define PXAMMCI_RESP(wd, value0, value1)	\
         s->resp_fifo[(wd) + 0] |= (value0);	\
         s->resp_fifo[(wd) + 1] |= (value1) << 8;
     case 0:	/* No response */
         goto complete;

     case 1:	/* R1, R4, R5 or R6 */
         if (rsplen < 4)
             goto timeout;
         goto complete;

     case 2:	/* R2 */
         if (rsplen < 16)
             goto timeout;
         goto complete;

     case 3:	/* R3 */
         if (rsplen < 4)
             goto timeout;
         goto complete;

     complete:
         for (i = 0; rsplen > 0; i ++, rsplen -= 2) {
             PXAMMCI_RESP(i, response[i * 2], response[i * 2 + 1]);
         }
         s->status |= STAT_END_CMDRES;

         if (!(s->cmdat & CMDAT_DATA_EN))
             s->active = 0;
         else
             s->bytesleft = s->numblk * s->blklen;

         s->resp_len = 0;
         break;

     timeout:
         s->active = 0;
         s->status |= STAT_TOUT_RES;
         break;
     }

     pxa2xx_mmci_fifo_update(s);
 }

 static uint64_t pxa2xx_mmci_read(void *opaque, hwaddr offset, unsigned size)
 {
     PXA2xxMMCIState *s = (PXA2xxMMCIState *) opaque;
     uint32_t ret;

     switch (offset) {
     case MMC_STRPCL:
         return 0;
     case MMC_STAT:
         return s->status;
     case MMC_CLKRT:
         return s->clkrt;
     case MMC_SPI:
         return s->spi;
     case MMC_CMDAT:
         return s->cmdat;
     case MMC_RESTO:
         return s->resp_tout;
     case MMC_RDTO:
         return s->read_tout;
     case MMC_BLKLEN:
         return s->blklen;
     case MMC_NUMBLK:
         return s->numblk;
     case MMC_PRTBUF:
         return 0;
     case MMC_I_MASK:
         return s->intmask;
     case MMC_I_REG:
         return s->intreq;
     case MMC_CMD:
         return s->cmd | 0x40;
     case MMC_ARGH:
         return s->arg >> 16;
     case MMC_ARGL:
         return s->arg & 0xffff;
     case MMC_RES:
         if (s->resp_len < 9)
             return s->resp_fifo[s->resp_len ++];
         return 0;
     case MMC_RXFIFO:
         ret = 0;
         while (size-- && s->rx_len) {
             ret |= s->rx_fifo[s->rx_start++] << (size << 3);
             s->rx_start &= 0x1f;
             s->rx_len --;
         }
         s->intreq &= ~INT_RXFIFO_REQ;
         pxa2xx_mmci_fifo_update(s);
         return ret;
     case MMC_RDWAIT:
         return 0;
     case MMC_BLKS_REM:
         return s->numblk;
     default:
         hw_error("%s: Bad offset " REG_FMT "\n", __FUNCTION__, offset);
     }

     return 0;
 }

 static void pxa2xx_mmci_write(void *opaque,
                               hwaddr offset, uint64_t value, unsigned size)
 {
     PXA2xxMMCIState *s = (PXA2xxMMCIState *) opaque;

     switch (offset) {
     case MMC_STRPCL:
         if (value & STRPCL_STRT_CLK) {
             s->status |= STAT_CLK_EN;
             s->intreq &= ~INT_CLK_OFF;

             if (s->cmdreq && !(s->cmdat & CMDAT_STOP_TRAN)) {
                 s->status &= STAT_CLK_EN;
                 pxa2xx_mmci_wakequeues(s);
             }
         }

         if (value & STRPCL_STOP_CLK) {
             s->status &= ~STAT_CLK_EN;
             s->intreq |= INT_CLK_OFF;
             s->active = 0;
         }

         pxa2xx_mmci_int_update(s);
         break;

     case MMC_CLKRT:
         s->clkrt = value & 7;
         break;

     case MMC_SPI:
         s->spi = value & 0xf;
         if (value & SPI_SPI_MODE)
             printf("%s: attempted to use card in SPI mode\n", __FUNCTION__);
         break;

     case MMC_CMDAT:
         s->cmdat = value & 0x3dff;
         s->active = 0;
         s->cmdreq = 1;
         if (!(value & CMDAT_STOP_TRAN)) {
             s->status &= STAT_CLK_EN;

             if (s->status & STAT_CLK_EN)
                 pxa2xx_mmci_wakequeues(s);
         }

         pxa2xx_mmci_int_update(s);
         break;

     case MMC_RESTO:
         s->resp_tout = value & 0x7f;
         break;

     case MMC_RDTO:
         s->read_tout = value & 0xffff;
         break;

     case MMC_BLKLEN:
         s->blklen = value & 0xfff;
         break;

     case MMC_NUMBLK:
         s->numblk = value & 0xffff;
         break;

     case MMC_PRTBUF:
         if (value & PRTBUF_PRT_BUF) {
             s->tx_start ^= 32;
             s->tx_len = 0;
         }
         pxa2xx_mmci_fifo_update(s);
         break;

     case MMC_I_MASK:
         s->intmask = value & 0x1fff;
         pxa2xx_mmci_int_update(s);
         break;

     case MMC_CMD:
         s->cmd = value & 0x3f;
         break;

     case MMC_ARGH:
         s->arg &= 0x0000ffff;
         s->arg |= value << 16;
         break;

     case MMC_ARGL:
         s->arg &= 0xffff0000;
         s->arg |= value & 0x0000ffff;
         break;

     case MMC_TXFIFO:
         while (size-- && s->tx_len < 0x20)
             s->tx_fifo[(s->tx_start + (s->tx_len ++)) & 0x1f] =
                     (value >> (size << 3)) & 0xff;
         s->intreq &= ~INT_TXFIFO_REQ;
         pxa2xx_mmci_fifo_update(s);
         break;

     case MMC_RDWAIT:
     case MMC_BLKS_REM:
         break;

     default:
         hw_error("%s: Bad offset " REG_FMT "\n", __FUNCTION__, offset);
     }
 }

 static const MemoryRegionOps pxa2xx_mmci_ops = {
     .read = pxa2xx_mmci_read,
     .write = pxa2xx_mmci_write,
     .endianness = DEVICE_NATIVE_ENDIAN,
 };

 PXA2xxMMCIState *pxa2xx_mmci_init(MemoryRegion *sysmem,
                 hwaddr base,
                 BlockBackend *blk, qemu_irq irq,
                 qemu_irq rx_dma, qemu_irq tx_dma)
 {
     DeviceState *dev, *carddev;
     SysBusDevice *sbd;
     PXA2xxMMCIState *s;
     Error *err = NULL;

     dev = qdev_create(NULL, TYPE_PXA2XX_MMCI);
     s = PXA2XX_MMCI(dev);
     sbd = SYS_BUS_DEVICE(dev);
     sysbus_mmio_map(sbd, 0, base);
     sysbus_connect_irq(sbd, 0, irq);
     qdev_connect_gpio_out_named(dev, "rx-dma", 0, rx_dma);
     qdev_connect_gpio_out_named(dev, "tx-dma", 0, tx_dma);

     /* Create and plug in the sd card */
     carddev = qdev_create(qdev_get_child_bus(dev, "sd-bus"), TYPE_SD_CARD);
     qdev_prop_set_drive(carddev, "drive", blk, &err);
     if (err) {
         error_report("failed to init SD card: %s", error_get_pretty(err));
         return NULL;
     }
     object_property_set_bool(OBJECT(carddev), true, "realized", &err);
     if (err) {
         error_report("failed to init SD card: %s", error_get_pretty(err));
         return NULL;
     }

     return s;
 }

 static void pxa2xx_mmci_set_inserted(DeviceState *dev, bool inserted)
 {
     PXA2xxMMCIState *s = PXA2XX_MMCI(dev);

     qemu_set_irq(s->inserted, inserted);
 }

 static void pxa2xx_mmci_set_readonly(DeviceState *dev, bool readonly)
 {
     PXA2xxMMCIState *s = PXA2XX_MMCI(dev);

     qemu_set_irq(s->readonly, readonly);
 }

 void pxa2xx_mmci_handlers(PXA2xxMMCIState *s, qemu_irq readonly,
                           qemu_irq coverswitch)
 {
     DeviceState *dev = DEVICE(s);

     s->readonly = readonly;
     s->inserted = coverswitch;

     pxa2xx_mmci_set_inserted(dev, sdbus_get_inserted(&s->sdbus));
     pxa2xx_mmci_set_readonly(dev, sdbus_get_readonly(&s->sdbus));
 }

 static void pxa2xx_mmci_reset(DeviceState *d)
 {
     PXA2xxMMCIState *s = PXA2XX_MMCI(d);

     s->status = 0;
     s->clkrt = 0;
     s->spi = 0;
     s->cmdat = 0;
     s->resp_tout = 0;
     s->read_tout = 0;
     s->blklen = 0;
     s->numblk = 0;
     s->intmask = 0;
     s->intreq = 0;
     s->cmd = 0;
     s->arg = 0;
     s->active = 0;
     s->bytesleft = 0;
     s->tx_start = 0;
     s->tx_len = 0;
     s->rx_start = 0;
     s->rx_len = 0;
     s->resp_len = 0;
     s->cmdreq = 0;
     memset(s->tx_fifo, 0, sizeof(s->tx_fifo));
     memset(s->rx_fifo, 0, sizeof(s->rx_fifo));
     memset(s->resp_fifo, 0, sizeof(s->resp_fifo));
 }

 static void pxa2xx_mmci_instance_init(Object *obj)
 {
     PXA2xxMMCIState *s = PXA2XX_MMCI(obj);
     SysBusDevice *sbd = SYS_BUS_DEVICE(obj);
     DeviceState *dev = DEVICE(obj);

     memory_region_init_io(&s->iomem, obj, &pxa2xx_mmci_ops, s,
                           "pxa2xx-mmci", 0x00100000);
     sysbus_init_mmio(sbd, &s->iomem);
     sysbus_init_irq(sbd, &s->irq);
     qdev_init_gpio_out_named(dev, &s->rx_dma, "rx-dma", 1);
     qdev_init_gpio_out_named(dev, &s->tx_dma, "tx-dma", 1);

     qbus_create_inplace(&s->sdbus, sizeof(s->sdbus),
                         TYPE_PXA2XX_MMCI_BUS, DEVICE(obj), "sd-bus");
 }

 static void pxa2xx_mmci_class_init(ObjectClass *klass, void *data)
 {
     DeviceClass *dc = DEVICE_CLASS(klass);

     dc->vmsd = &vmstate_pxa2xx_mmci;
     dc->reset = pxa2xx_mmci_reset;
 }

 static void pxa2xx_mmci_bus_class_init(ObjectClass *klass, void *data)
 {
     SDBusClass *sbc = SD_BUS_CLASS(klass);

     sbc->set_inserted = pxa2xx_mmci_set_inserted;
     sbc->set_readonly = pxa2xx_mmci_set_readonly;
 }

 static const TypeInfo pxa2xx_mmci_info = {
     .name = TYPE_PXA2XX_MMCI,
     .parent = TYPE_SYS_BUS_DEVICE,
     .instance_size = sizeof(PXA2xxMMCIState),
     .instance_init = pxa2xx_mmci_instance_init,
     .class_init = pxa2xx_mmci_class_init,
 };

 static const TypeInfo pxa2xx_mmci_bus_info = {
     .name = TYPE_PXA2XX_MMCI_BUS,
     .parent = TYPE_SD_BUS,
     .instance_size = sizeof(SDBus),
     .class_init = pxa2xx_mmci_bus_class_init,
 };

 static void pxa2xx_mmci_register_types(void)
 {
     type_register_static(&pxa2xx_mmci_info);
     type_register_static(&pxa2xx_mmci_bus_info);
 }

 type_init(pxa2xx_mmci_register_types)
	/*
	* Intel XScale PXA255/270 MultiMediaCard/SD/SDIO Controller emulation.
	*
	* Copyright (c) 2006 Openedhand Ltd.
	* Written by Andrzej Zaborowski <balrog@zabor.org>
	*
	* This code is licensed under the GPLv2.
	*
	* Contributions after 2012-01-13 are licensed under the terms of the
	* GNU GPL, version 2 or (at your option) any later version.
	*/

	#include "qemu/osdep.h"
	#include "qapi/error.h"
	#include "hw/hw.h"
	#include "hw/sysbus.h"
	#include "hw/arm/pxa.h"
	#include "hw/sd/sd.h"
	#include "hw/qdev.h"
	#include "hw/qdev-properties.h"
	#include "qemu/error-report.h"

	#define TYPE_PXA2XX_MMCI "pxa2xx-mmci"
	#define PXA2XX_MMCI(obj) OBJECT_CHECK(PXA2xxMMCIState, (obj), TYPE_PXA2XX_MMCI)

	#define TYPE_PXA2XX_MMCI_BUS "pxa2xx-mmci-bus"
	#define PXA2XX_MMCI_BUS(obj) OBJECT_CHECK(SDBus, (obj), TYPE_PXA2XX_MMCI_BUS)

	struct PXA2xxMMCIState {
	SysBusDevice parent_obj;

	MemoryRegion iomem;
	qemu_irq irq;
	qemu_irq rx_dma;
	qemu_irq tx_dma;
	qemu_irq inserted;
	qemu_irq readonly;

	BlockBackend *blk;
	SDBus sdbus;

	uint32_t status;
	uint32_t clkrt;
	uint32_t spi;
	uint32_t cmdat;
	uint32_t resp_tout;
	uint32_t read_tout;
	int32_t blklen;
	int32_t numblk;
	uint32_t intmask;
	uint32_t intreq;
	int32_t cmd;
	uint32_t arg;

	int32_t active;
	int32_t bytesleft;
	uint8_t tx_fifo[64];
	uint32_t tx_start;
	uint32_t tx_len;
	uint8_t rx_fifo[32];
	uint32_t rx_start;
	uint32_t rx_len;
	uint16_t resp_fifo[9];
	uint32_t resp_len;

	int32_t cmdreq;
	};

	static bool pxa2xx_mmci_vmstate_validate(void *opaque, int version_id)
	{
	PXA2xxMMCIState *s = opaque;

	return s->tx_start < ARRAY_SIZE(s->tx_fifo)
	&& s->rx_start < ARRAY_SIZE(s->rx_fifo)
	&& s->tx_len <= ARRAY_SIZE(s->tx_fifo)
	&& s->rx_len <= ARRAY_SIZE(s->rx_fifo)
	&& s->resp_len <= ARRAY_SIZE(s->resp_fifo);
	}


	static const VMStateDescription vmstate_pxa2xx_mmci = {
	.name = "pxa2xx-mmci",
	.version_id = 2,
	.minimum_version_id = 2,
	.fields = (VMStateField[]) {
	VMSTATE_UINT32(status, PXA2xxMMCIState),
	VMSTATE_UINT32(clkrt, PXA2xxMMCIState),
	VMSTATE_UINT32(spi, PXA2xxMMCIState),
	VMSTATE_UINT32(cmdat, PXA2xxMMCIState),
	VMSTATE_UINT32(resp_tout, PXA2xxMMCIState),
	VMSTATE_UINT32(read_tout, PXA2xxMMCIState),
	VMSTATE_INT32(blklen, PXA2xxMMCIState),
	VMSTATE_INT32(numblk, PXA2xxMMCIState),
	VMSTATE_UINT32(intmask, PXA2xxMMCIState),
	VMSTATE_UINT32(intreq, PXA2xxMMCIState),
	VMSTATE_INT32(cmd, PXA2xxMMCIState),
	VMSTATE_UINT32(arg, PXA2xxMMCIState),
	VMSTATE_INT32(cmdreq, PXA2xxMMCIState),
	VMSTATE_INT32(active, PXA2xxMMCIState),
	VMSTATE_INT32(bytesleft, PXA2xxMMCIState),
	VMSTATE_UINT32(tx_start, PXA2xxMMCIState),
	VMSTATE_UINT32(tx_len, PXA2xxMMCIState),
	VMSTATE_UINT32(rx_start, PXA2xxMMCIState),
	VMSTATE_UINT32(rx_len, PXA2xxMMCIState),
	VMSTATE_UINT32(resp_len, PXA2xxMMCIState),
	VMSTATE_VALIDATE("fifo size incorrect", pxa2xx_mmci_vmstate_validate),
	VMSTATE_UINT8_ARRAY(tx_fifo, PXA2xxMMCIState, 64),
	VMSTATE_UINT8_ARRAY(rx_fifo, PXA2xxMMCIState, 32),
	VMSTATE_UINT16_ARRAY(resp_fifo, PXA2xxMMCIState, 9),
	VMSTATE_END_OF_LIST()
	}
	};

	#define MMC_STRPCL 0x00 /* MMC Clock Start/Stop register */
	#define MMC_STAT 0x04 /* MMC Status register */
	#define MMC_CLKRT 0x08 /* MMC Clock Rate register */
	#define MMC_SPI 0x0c /* MMC SPI Mode register */
	#define MMC_CMDAT 0x10 /* MMC Command/Data register */
	#define MMC_RESTO 0x14 /* MMC Response Time-Out register */
	#define MMC_RDTO 0x18 /* MMC Read Time-Out register */
	#define MMC_BLKLEN 0x1c /* MMC Block Length register */
	#define MMC_NUMBLK 0x20 /* MMC Number of Blocks register */
	#define MMC_PRTBUF 0x24 /* MMC Buffer Partly Full register */
	#define MMC_I_MASK 0x28 /* MMC Interrupt Mask register */
	#define MMC_I_REG 0x2c /* MMC Interrupt Request register */
	#define MMC_CMD 0x30 /* MMC Command register */
	#define MMC_ARGH 0x34 /* MMC Argument High register */
	#define MMC_ARGL 0x38 /* MMC Argument Low register */
	#define MMC_RES 0x3c /* MMC Response FIFO */
	#define MMC_RXFIFO 0x40 /* MMC Receive FIFO */
	#define MMC_TXFIFO 0x44 /* MMC Transmit FIFO */
	#define MMC_RDWAIT 0x48 /* MMC RD_WAIT register */
	#define MMC_BLKS_REM 0x4c /* MMC Blocks Remaining register */

	/* Bitfield masks */
	#define STRPCL_STOP_CLK (1 << 0)
	#define STRPCL_STRT_CLK (1 << 1)
	#define STAT_TOUT_RES (1 << 1)
	#define STAT_CLK_EN (1 << 8)
	#define STAT_DATA_DONE (1 << 11)
	#define STAT_PRG_DONE (1 << 12)
	#define STAT_END_CMDRES (1 << 13)
	#define SPI_SPI_MODE (1 << 0)
	#define CMDAT_RES_TYPE (3 << 0)
	#define CMDAT_DATA_EN (1 << 2)
	#define CMDAT_WR_RD (1 << 3)
	#define CMDAT_DMA_EN (1 << 7)
	#define CMDAT_STOP_TRAN (1 << 10)
	#define INT_DATA_DONE (1 << 0)
	#define INT_PRG_DONE (1 << 1)
	#define INT_END_CMD (1 << 2)
	#define INT_STOP_CMD (1 << 3)
	#define INT_CLK_OFF (1 << 4)
	#define INT_RXFIFO_REQ (1 << 5)
	#define INT_TXFIFO_REQ (1 << 6)
	#define INT_TINT (1 << 7)
	#define INT_DAT_ERR (1 << 8)
	#define INT_RES_ERR (1 << 9)
	#define INT_RD_STALLED (1 << 10)
	#define INT_SDIO_INT (1 << 11)
	#define INT_SDIO_SACK (1 << 12)
	#define PRTBUF_PRT_BUF (1 << 0)

	/* Route internal interrupt lines to the global IC and DMA */
	static void pxa2xx_mmci_int_update(PXA2xxMMCIState *s)
	{
	uint32_t mask = s->intmask;
	if (s->cmdat & CMDAT_DMA_EN) {
	mask \|= INT_RXFIFO_REQ \| INT_TXFIFO_REQ;

	qemu_set_irq(s->rx_dma, !!(s->intreq & INT_RXFIFO_REQ));
	qemu_set_irq(s->tx_dma, !!(s->intreq & INT_TXFIFO_REQ));
	}

	qemu_set_irq(s->irq, !!(s->intreq & ~mask));
	}

	static void pxa2xx_mmci_fifo_update(PXA2xxMMCIState *s)
	{
	if (!s->active)
	return;

	if (s->cmdat & CMDAT_WR_RD) {
	while (s->bytesleft && s->tx_len) {
	sdbus_write_data(&s->sdbus, s->tx_fifo[s->tx_start++]);
	s->tx_start &= 0x1f;
	s->tx_len --;
	s->bytesleft --;
	}
	if (s->bytesleft)
	s->intreq \|= INT_TXFIFO_REQ;
	} else
	while (s->bytesleft && s->rx_len < 32) {
	s->rx_fifo[(s->rx_start + (s->rx_len ++)) & 0x1f] =
	sdbus_read_data(&s->sdbus);
	s->bytesleft --;
	s->intreq \|= INT_RXFIFO_REQ;
	}

	if (!s->bytesleft) {
	s->active = 0;
	s->intreq \|= INT_DATA_DONE;
	s->status \|= STAT_DATA_DONE;

	if (s->cmdat & CMDAT_WR_RD) {
	s->intreq \|= INT_PRG_DONE;
	s->status \|= STAT_PRG_DONE;
	}
	}

	pxa2xx_mmci_int_update(s);
	}

	static void pxa2xx_mmci_wakequeues(PXA2xxMMCIState *s)
	{
	int rsplen, i;
	SDRequest request;
	uint8_t response[16];

	s->active = 1;
	s->rx_len = 0;
	s->tx_len = 0;
	s->cmdreq = 0;

	request.cmd = s->cmd;
	request.arg = s->arg;
	request.crc = 0; /* FIXME */

	rsplen = sdbus_do_command(&s->sdbus, &request, response);
	s->intreq \|= INT_END_CMD;

	memset(s->resp_fifo, 0, sizeof(s->resp_fifo));
	switch (s->cmdat & CMDAT_RES_TYPE) {
	#define PXAMMCI_RESP(wd, value0, value1) \
	s->resp_fifo[(wd) + 0] \|= (value0); \
	s->resp_fifo[(wd) + 1] \|= (value1) << 8;
	case 0: /* No response */
	goto complete;

	case 1: /* R1, R4, R5 or R6 */
	if (rsplen < 4)
	goto timeout;
	goto complete;

	case 2: /* R2 */
	if (rsplen < 16)
	goto timeout;
	goto complete;

	case 3: /* R3 */
	if (rsplen < 4)
	goto timeout;
	goto complete;

	complete:
	for (i = 0; rsplen > 0; i ++, rsplen -= 2) {
	PXAMMCI_RESP(i, response[i * 2], response[i * 2 + 1]);
	}
	s->status \|= STAT_END_CMDRES;

	if (!(s->cmdat & CMDAT_DATA_EN))
	s->active = 0;
	else
	s->bytesleft = s->numblk * s->blklen;

	s->resp_len = 0;
	break;

	timeout:
	s->active = 0;
	s->status \|= STAT_TOUT_RES;
	break;
	}

	pxa2xx_mmci_fifo_update(s);
	}

	static uint64_t pxa2xx_mmci_read(void *opaque, hwaddr offset, unsigned size)
	{
	PXA2xxMMCIState s = (PXA2xxMMCIState ) opaque;
	uint32_t ret;

	switch (offset) {
	case MMC_STRPCL:
	return 0;
	case MMC_STAT:
	return s->status;
	case MMC_CLKRT:
	return s->clkrt;
	case MMC_SPI:
	return s->spi;
	case MMC_CMDAT:
	return s->cmdat;
	case MMC_RESTO:
	return s->resp_tout;
	case MMC_RDTO:
	return s->read_tout;
	case MMC_BLKLEN:
	return s->blklen;
	case MMC_NUMBLK:
	return s->numblk;
	case MMC_PRTBUF:
	return 0;
	case MMC_I_MASK:
	return s->intmask;
	case MMC_I_REG:
	return s->intreq;
	case MMC_CMD:
	return s->cmd \| 0x40;
	case MMC_ARGH:
	return s->arg >> 16;
	case MMC_ARGL:
	return s->arg & 0xffff;
	case MMC_RES:
	if (s->resp_len < 9)
	return s->resp_fifo[s->resp_len ++];
	return 0;
	case MMC_RXFIFO:
	ret = 0;
	while (size-- && s->rx_len) {
	ret \|= s->rx_fifo[s->rx_start++] << (size << 3);
	s->rx_start &= 0x1f;
	s->rx_len --;
	}
	s->intreq &= ~INT_RXFIFO_REQ;
	pxa2xx_mmci_fifo_update(s);
	return ret;
	case MMC_RDWAIT:
	return 0;
	case MMC_BLKS_REM:
	return s->numblk;
	default:
	hw_error("%s: Bad offset " REG_FMT "\n", __FUNCTION__, offset);
	}

	return 0;
	}

	static void pxa2xx_mmci_write(void *opaque,
	hwaddr offset, uint64_t value, unsigned size)
	{
	PXA2xxMMCIState s = (PXA2xxMMCIState ) opaque;

	switch (offset) {
	case MMC_STRPCL:
	if (value & STRPCL_STRT_CLK) {
	s->status \|= STAT_CLK_EN;
	s->intreq &= ~INT_CLK_OFF;

	if (s->cmdreq && !(s->cmdat & CMDAT_STOP_TRAN)) {
	s->status &= STAT_CLK_EN;
	pxa2xx_mmci_wakequeues(s);
	}
	}

	if (value & STRPCL_STOP_CLK) {
	s->status &= ~STAT_CLK_EN;
	s->intreq \|= INT_CLK_OFF;
	s->active = 0;
	}

	pxa2xx_mmci_int_update(s);
	break;

	case MMC_CLKRT:
	s->clkrt = value & 7;
	break;

	case MMC_SPI:
	s->spi = value & 0xf;
	if (value & SPI_SPI_MODE)
	printf("%s: attempted to use card in SPI mode\n", __FUNCTION__);
	break;

	case MMC_CMDAT:
	s->cmdat = value & 0x3dff;
	s->active = 0;
	s->cmdreq = 1;
	if (!(value & CMDAT_STOP_TRAN)) {
	s->status &= STAT_CLK_EN;

	if (s->status & STAT_CLK_EN)
	pxa2xx_mmci_wakequeues(s);
	}

	pxa2xx_mmci_int_update(s);
	break;

	case MMC_RESTO:
	s->resp_tout = value & 0x7f;
	break;

	case MMC_RDTO:
	s->read_tout = value & 0xffff;
	break;

	case MMC_BLKLEN:
	s->blklen = value & 0xfff;
	break;

	case MMC_NUMBLK:
	s->numblk = value & 0xffff;
	break;

	case MMC_PRTBUF:
	if (value & PRTBUF_PRT_BUF) {
	s->tx_start ^= 32;
	s->tx_len = 0;
	}
	pxa2xx_mmci_fifo_update(s);
	break;

	case MMC_I_MASK:
	s->intmask = value & 0x1fff;
	pxa2xx_mmci_int_update(s);
	break;

	case MMC_CMD:
	s->cmd = value & 0x3f;
	break;

	case MMC_ARGH:
	s->arg &= 0x0000ffff;
	s->arg \|= value << 16;
	break;

	case MMC_ARGL:
	s->arg &= 0xffff0000;
	s->arg \|= value & 0x0000ffff;
	break;

	case MMC_TXFIFO:
	while (size-- && s->tx_len < 0x20)
	s->tx_fifo[(s->tx_start + (s->tx_len ++)) & 0x1f] =
	(value >> (size << 3)) & 0xff;
	s->intreq &= ~INT_TXFIFO_REQ;
	pxa2xx_mmci_fifo_update(s);
	break;

	case MMC_RDWAIT:
	case MMC_BLKS_REM:
	break;

	default:
	hw_error("%s: Bad offset " REG_FMT "\n", __FUNCTION__, offset);
	}
	}

	static const MemoryRegionOps pxa2xx_mmci_ops = {
	.read = pxa2xx_mmci_read,
	.write = pxa2xx_mmci_write,
	.endianness = DEVICE_NATIVE_ENDIAN,
	};

	PXA2xxMMCIState pxa2xx_mmci_init(MemoryRegion sysmem,
	hwaddr base,
	BlockBackend *blk, qemu_irq irq,
	qemu_irq rx_dma, qemu_irq tx_dma)
	{
	DeviceState dev, carddev;
	SysBusDevice *sbd;
	PXA2xxMMCIState *s;
	Error *err = NULL;

	dev = qdev_create(NULL, TYPE_PXA2XX_MMCI);
	s = PXA2XX_MMCI(dev);
	sbd = SYS_BUS_DEVICE(dev);
	sysbus_mmio_map(sbd, 0, base);
	sysbus_connect_irq(sbd, 0, irq);
	qdev_connect_gpio_out_named(dev, "rx-dma", 0, rx_dma);
	qdev_connect_gpio_out_named(dev, "tx-dma", 0, tx_dma);

	/* Create and plug in the sd card */
	carddev = qdev_create(qdev_get_child_bus(dev, "sd-bus"), TYPE_SD_CARD);
	qdev_prop_set_drive(carddev, "drive", blk, &err);
	if (err) {
	error_report("failed to init SD card: %s", error_get_pretty(err));
	return NULL;
	}
	object_property_set_bool(OBJECT(carddev), true, "realized", &err);
	if (err) {
	error_report("failed to init SD card: %s", error_get_pretty(err));
	return NULL;
	}

	return s;
	}

	static void pxa2xx_mmci_set_inserted(DeviceState *dev, bool inserted)
	{
	PXA2xxMMCIState *s = PXA2XX_MMCI(dev);

	qemu_set_irq(s->inserted, inserted);
	}

	static void pxa2xx_mmci_set_readonly(DeviceState *dev, bool readonly)
	{
	PXA2xxMMCIState *s = PXA2XX_MMCI(dev);

	qemu_set_irq(s->readonly, readonly);
	}

	void pxa2xx_mmci_handlers(PXA2xxMMCIState *s, qemu_irq readonly,
	qemu_irq coverswitch)
	{
	DeviceState *dev = DEVICE(s);

	s->readonly = readonly;
	s->inserted = coverswitch;

	pxa2xx_mmci_set_inserted(dev, sdbus_get_inserted(&s->sdbus));
	pxa2xx_mmci_set_readonly(dev, sdbus_get_readonly(&s->sdbus));
	}

	static void pxa2xx_mmci_reset(DeviceState *d)
	{
	PXA2xxMMCIState *s = PXA2XX_MMCI(d);

	s->status = 0;
	s->clkrt = 0;
	s->spi = 0;
	s->cmdat = 0;
	s->resp_tout = 0;
	s->read_tout = 0;
	s->blklen = 0;
	s->numblk = 0;
	s->intmask = 0;
	s->intreq = 0;
	s->cmd = 0;
	s->arg = 0;
	s->active = 0;
	s->bytesleft = 0;
	s->tx_start = 0;
	s->tx_len = 0;
	s->rx_start = 0;
	s->rx_len = 0;
	s->resp_len = 0;
	s->cmdreq = 0;
	memset(s->tx_fifo, 0, sizeof(s->tx_fifo));
	memset(s->rx_fifo, 0, sizeof(s->rx_fifo));
	memset(s->resp_fifo, 0, sizeof(s->resp_fifo));
	}

	static void pxa2xx_mmci_instance_init(Object *obj)
	{
	PXA2xxMMCIState *s = PXA2XX_MMCI(obj);
	SysBusDevice *sbd = SYS_BUS_DEVICE(obj);
	DeviceState *dev = DEVICE(obj);

	memory_region_init_io(&s->iomem, obj, &pxa2xx_mmci_ops, s,
	"pxa2xx-mmci", 0x00100000);
	sysbus_init_mmio(sbd, &s->iomem);
	sysbus_init_irq(sbd, &s->irq);
	qdev_init_gpio_out_named(dev, &s->rx_dma, "rx-dma", 1);
	qdev_init_gpio_out_named(dev, &s->tx_dma, "tx-dma", 1);

	qbus_create_inplace(&s->sdbus, sizeof(s->sdbus),
	TYPE_PXA2XX_MMCI_BUS, DEVICE(obj), "sd-bus");
	}

	static void pxa2xx_mmci_class_init(ObjectClass klass, void data)
	{
	DeviceClass *dc = DEVICE_CLASS(klass);

	dc->vmsd = &vmstate_pxa2xx_mmci;
	dc->reset = pxa2xx_mmci_reset;
	}

	static void pxa2xx_mmci_bus_class_init(ObjectClass klass, void data)
	{
	SDBusClass *sbc = SD_BUS_CLASS(klass);

	sbc->set_inserted = pxa2xx_mmci_set_inserted;
	sbc->set_readonly = pxa2xx_mmci_set_readonly;
	}

	static const TypeInfo pxa2xx_mmci_info = {
	.name = TYPE_PXA2XX_MMCI,
	.parent = TYPE_SYS_BUS_DEVICE,
	.instance_size = sizeof(PXA2xxMMCIState),
	.instance_init = pxa2xx_mmci_instance_init,
	.class_init = pxa2xx_mmci_class_init,
	};

	static const TypeInfo pxa2xx_mmci_bus_info = {
	.name = TYPE_PXA2XX_MMCI_BUS,
	.parent = TYPE_SD_BUS,
	.instance_size = sizeof(SDBus),
	.class_init = pxa2xx_mmci_bus_class_init,
	};

	static void pxa2xx_mmci_register_types(void)
	{
	type_register_static(&pxa2xx_mmci_info);
	type_register_static(&pxa2xx_mmci_bus_info);
	}

	type_init(pxa2xx_mmci_register_types)