| /* |
| * QEMU System Emulator block driver |
| * |
| * Copyright (c) 2003 Fabrice Bellard |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a copy |
| * of this software and associated documentation files (the "Software"), to deal |
| * in the Software without restriction, including without limitation the rights |
| * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell |
| * copies of the Software, and to permit persons to whom the Software is |
| * furnished to do so, subject to the following conditions: |
| * |
| * The above copyright notice and this permission notice shall be included in |
| * all copies or substantial portions of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL |
| * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER |
| * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, |
| * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN |
| * THE SOFTWARE. |
| */ |
| #include "config-host.h" |
| #include "qemu-common.h" |
| #include "monitor/monitor.h" |
| #include "block/block_int.h" |
| #include "qemu/iov.h" |
| #include "qemu/module.h" |
| //#include "qapi/qmp/types.h" |
| #include "qapi/qmp/qjson.h" |
| |
| #ifdef CONFIG_BSD |
| #include <sys/types.h> |
| #include <sys/stat.h> |
| #include <sys/ioctl.h> |
| #include <sys/queue.h> |
| #ifndef __DragonFly__ |
| #include <sys/disk.h> |
| #endif |
| #endif |
| |
| #ifdef _WIN32 |
| #include <windows.h> |
| #endif |
| |
| static BlockDriverAIOCB *bdrv_aio_readv_em(BlockDriverState *bs, |
| int64_t sector_num, QEMUIOVector *qiov, int nb_sectors, |
| BlockDriverCompletionFunc *cb, void *opaque); |
| static BlockDriverAIOCB *bdrv_aio_writev_em(BlockDriverState *bs, |
| int64_t sector_num, QEMUIOVector *qiov, int nb_sectors, |
| BlockDriverCompletionFunc *cb, void *opaque); |
| static BlockDriverAIOCB *bdrv_aio_flush_em(BlockDriverState *bs, |
| BlockDriverCompletionFunc *cb, void *opaque); |
| static BlockDriverAIOCB *bdrv_aio_noop_em(BlockDriverState *bs, |
| BlockDriverCompletionFunc *cb, void *opaque); |
| static int bdrv_read_em(BlockDriverState *bs, int64_t sector_num, |
| uint8_t *buf, int nb_sectors); |
| static int bdrv_write_em(BlockDriverState *bs, int64_t sector_num, |
| const uint8_t *buf, int nb_sectors); |
| |
| static QTAILQ_HEAD(, BlockDriverState) bdrv_states = |
| QTAILQ_HEAD_INITIALIZER(bdrv_states); |
| |
| static QLIST_HEAD(, BlockDriver) bdrv_drivers = |
| QLIST_HEAD_INITIALIZER(bdrv_drivers); |
| |
| /* The device to use for VM snapshots */ |
| static BlockDriverState *bs_snapshots; |
| |
| /* If non-zero, use only whitelisted block drivers */ |
| static int use_bdrv_whitelist; |
| |
| int _path_is_absolute(const char *path) |
| { |
| const char *p; |
| #ifdef _WIN32 |
| /* specific case for names like: "\\.\d:" */ |
| if (*path == '/' || *path == '\\') |
| return 1; |
| #endif |
| p = strchr(path, ':'); |
| if (p) |
| p++; |
| else |
| p = path; |
| #ifdef _WIN32 |
| return (*p == '/' || *p == '\\'); |
| #else |
| return (*p == '/'); |
| #endif |
| } |
| |
| /* if filename is absolute, just copy it to dest. Otherwise, build a |
| path to it by considering it is relative to base_path. URL are |
| supported. */ |
| void path_combine(char *dest, int dest_size, |
| const char *base_path, |
| const char *filename) |
| { |
| const char *p, *p1; |
| int len; |
| |
| if (dest_size <= 0) |
| return; |
| if (_path_is_absolute(filename)) { |
| pstrcpy(dest, dest_size, filename); |
| } else { |
| p = strchr(base_path, ':'); |
| if (p) |
| p++; |
| else |
| p = base_path; |
| p1 = strrchr(base_path, '/'); |
| #ifdef _WIN32 |
| { |
| const char *p2; |
| p2 = strrchr(base_path, '\\'); |
| if (!p1 || p2 > p1) |
| p1 = p2; |
| } |
| #endif |
| if (p1) |
| p1++; |
| else |
| p1 = base_path; |
| if (p1 > p) |
| p = p1; |
| len = p - base_path; |
| if (len > dest_size - 1) |
| len = dest_size - 1; |
| memcpy(dest, base_path, len); |
| dest[len] = '\0'; |
| pstrcat(dest, dest_size, filename); |
| } |
| } |
| |
| void bdrv_register(BlockDriver *bdrv) |
| { |
| if (!bdrv->bdrv_aio_readv) { |
| /* add AIO emulation layer */ |
| bdrv->bdrv_aio_readv = bdrv_aio_readv_em; |
| bdrv->bdrv_aio_writev = bdrv_aio_writev_em; |
| } else if (!bdrv->bdrv_read) { |
| /* add synchronous IO emulation layer */ |
| bdrv->bdrv_read = bdrv_read_em; |
| bdrv->bdrv_write = bdrv_write_em; |
| } |
| |
| if (!bdrv->bdrv_aio_flush) |
| bdrv->bdrv_aio_flush = bdrv_aio_flush_em; |
| |
| QLIST_INSERT_HEAD(&bdrv_drivers, bdrv, list); |
| } |
| |
| /* create a new block device (by default it is empty) */ |
| BlockDriverState *bdrv_new(const char *device_name) |
| { |
| BlockDriverState *bs; |
| |
| bs = g_malloc0(sizeof(BlockDriverState)); |
| pstrcpy(bs->device_name, sizeof(bs->device_name), device_name); |
| if (device_name[0] != '\0') { |
| QTAILQ_INSERT_TAIL(&bdrv_states, bs, list); |
| } |
| return bs; |
| } |
| |
| BlockDriver *bdrv_find_format(const char *format_name) |
| { |
| BlockDriver *drv1; |
| QLIST_FOREACH(drv1, &bdrv_drivers, list) { |
| if (!strcmp(drv1->format_name, format_name)) { |
| return drv1; |
| } |
| } |
| return NULL; |
| } |
| |
| static int bdrv_is_whitelisted(BlockDriver *drv) |
| { |
| static const char *whitelist[] = { |
| CONFIG_BDRV_WHITELIST |
| }; |
| const char **p; |
| |
| if (!whitelist[0]) |
| return 1; /* no whitelist, anything goes */ |
| |
| for (p = whitelist; *p; p++) { |
| if (!strcmp(drv->format_name, *p)) { |
| return 1; |
| } |
| } |
| return 0; |
| } |
| |
| BlockDriver *bdrv_find_whitelisted_format(const char *format_name) |
| { |
| BlockDriver *drv = bdrv_find_format(format_name); |
| return drv && bdrv_is_whitelisted(drv) ? drv : NULL; |
| } |
| |
| int bdrv_create(BlockDriver *drv, const char* filename, |
| QEMUOptionParameter *options) |
| { |
| if (!drv->bdrv_create) |
| return -ENOTSUP; |
| |
| return drv->bdrv_create(filename, options); |
| } |
| |
| int bdrv_create_file(const char* filename, QEMUOptionParameter *options) |
| { |
| BlockDriver *drv; |
| |
| drv = bdrv_find_protocol(filename); |
| if (drv == NULL) { |
| drv = bdrv_find_format("file"); |
| } |
| |
| return bdrv_create(drv, filename, options); |
| } |
| |
| #ifdef _WIN32 |
| void get_tmp_filename(char *filename, int size) |
| { |
| char temp_dir[MAX_PATH]; |
| |
| GetTempPath(MAX_PATH, temp_dir); |
| GetTempFileName(temp_dir, "qem", 0, filename); |
| } |
| #else |
| void get_tmp_filename(char *filename, int size) |
| { |
| int fd; |
| const char *tmpdir; |
| /* XXX: race condition possible */ |
| tmpdir = getenv("TMPDIR"); |
| if (!tmpdir) |
| tmpdir = "/tmp"; |
| snprintf(filename, size, "%s/vl.XXXXXX", tmpdir); |
| fd = mkstemp(filename); |
| close(fd); |
| } |
| #endif |
| |
| #ifdef _WIN32 |
| static int is_windows_drive_prefix(const char *filename) |
| { |
| return (((filename[0] >= 'a' && filename[0] <= 'z') || |
| (filename[0] >= 'A' && filename[0] <= 'Z')) && |
| filename[1] == ':'); |
| } |
| |
| int is_windows_drive(const char *filename) |
| { |
| if (is_windows_drive_prefix(filename) && |
| filename[2] == '\0') |
| return 1; |
| if (strstart(filename, "\\\\.\\", NULL) || |
| strstart(filename, "//./", NULL)) |
| return 1; |
| return 0; |
| } |
| #endif |
| |
| /* |
| * Detect host devices. By convention, /dev/cdrom[N] is always |
| * recognized as a host CDROM. |
| */ |
| static BlockDriver *find_hdev_driver(const char *filename) |
| { |
| int score_max = 0, score; |
| BlockDriver *drv = NULL, *d; |
| |
| QLIST_FOREACH(d, &bdrv_drivers, list) { |
| if (d->bdrv_probe_device) { |
| score = d->bdrv_probe_device(filename); |
| if (score > score_max) { |
| score_max = score; |
| drv = d; |
| } |
| } |
| } |
| |
| return drv; |
| } |
| |
| BlockDriver *bdrv_find_protocol(const char *filename) |
| { |
| BlockDriver *drv1; |
| char protocol[128]; |
| int len; |
| const char *p; |
| |
| /* TODO Drivers without bdrv_file_open must be specified explicitly */ |
| |
| /* |
| * XXX(hch): we really should not let host device detection |
| * override an explicit protocol specification, but moving this |
| * later breaks access to device names with colons in them. |
| * Thanks to the brain-dead persistent naming schemes on udev- |
| * based Linux systems those actually are quite common. |
| */ |
| drv1 = find_hdev_driver(filename); |
| if (drv1) { |
| return drv1; |
| } |
| |
| #ifdef _WIN32 |
| if (is_windows_drive(filename) || |
| is_windows_drive_prefix(filename)) |
| return bdrv_find_format("file"); |
| #endif |
| |
| p = strchr(filename, ':'); |
| if (!p) { |
| return bdrv_find_format("file"); |
| } |
| len = p - filename; |
| if (len > sizeof(protocol) - 1) |
| len = sizeof(protocol) - 1; |
| memcpy(protocol, filename, len); |
| protocol[len] = '\0'; |
| QLIST_FOREACH(drv1, &bdrv_drivers, list) { |
| if (drv1->protocol_name && |
| !strcmp(drv1->protocol_name, protocol)) { |
| return drv1; |
| } |
| } |
| return NULL; |
| } |
| |
| static int find_image_format(const char *filename, BlockDriver **pdrv) |
| { |
| int ret, score, score_max; |
| BlockDriver *drv1, *drv; |
| uint8_t buf[2048]; |
| BlockDriverState *bs; |
| |
| ret = bdrv_file_open(&bs, filename, 0); |
| if (ret < 0) { |
| *pdrv = NULL; |
| return ret; |
| } |
| |
| /* Return the raw BlockDriver * to scsi-generic devices or empty drives */ |
| if (bs->sg || !bdrv_is_inserted(bs)) { |
| bdrv_delete(bs); |
| drv = bdrv_find_format("raw"); |
| if (!drv) { |
| ret = -ENOENT; |
| } |
| *pdrv = drv; |
| return ret; |
| } |
| |
| ret = bdrv_pread(bs, 0, buf, sizeof(buf)); |
| bdrv_delete(bs); |
| if (ret < 0) { |
| *pdrv = NULL; |
| return ret; |
| } |
| |
| score_max = 0; |
| drv = NULL; |
| QLIST_FOREACH(drv1, &bdrv_drivers, list) { |
| if (drv1->bdrv_probe) { |
| score = drv1->bdrv_probe(buf, ret, filename); |
| if (score > score_max) { |
| score_max = score; |
| drv = drv1; |
| } |
| } |
| } |
| if (!drv) { |
| ret = -ENOENT; |
| } |
| *pdrv = drv; |
| return ret; |
| } |
| |
| /** |
| * Set the current 'total_sectors' value |
| */ |
| static int refresh_total_sectors(BlockDriverState *bs, int64_t hint) |
| { |
| BlockDriver *drv = bs->drv; |
| |
| /* Do not attempt drv->bdrv_getlength() on scsi-generic devices */ |
| if (bs->sg) |
| return 0; |
| |
| /* query actual device if possible, otherwise just trust the hint */ |
| if (drv->bdrv_getlength) { |
| int64_t length = drv->bdrv_getlength(bs); |
| if (length < 0) { |
| return length; |
| } |
| hint = length >> BDRV_SECTOR_BITS; |
| } |
| |
| bs->total_sectors = hint; |
| return 0; |
| } |
| |
| /* |
| * Common part for opening disk images and files |
| */ |
| static int bdrv_open_common(BlockDriverState *bs, const char *filename, |
| int flags, BlockDriver *drv) |
| { |
| int ret, open_flags; |
| |
| assert(drv != NULL); |
| |
| bs->file = NULL; |
| bs->total_sectors = 0; |
| bs->encrypted = 0; |
| bs->valid_key = 0; |
| bs->open_flags = flags; |
| /* buffer_alignment defaulted to 512, drivers can change this value */ |
| bs->buffer_alignment = 512; |
| |
| pstrcpy(bs->filename, sizeof(bs->filename), filename); |
| |
| if (use_bdrv_whitelist && !bdrv_is_whitelisted(drv)) { |
| return -ENOTSUP; |
| } |
| |
| bs->drv = drv; |
| bs->opaque = g_malloc0(drv->instance_size); |
| |
| /* |
| * Yes, BDRV_O_NOCACHE aka O_DIRECT means we have to present a |
| * write cache to the guest. We do need the fdatasync to flush |
| * out transactions for block allocations, and we maybe have a |
| * volatile write cache in our backing device to deal with. |
| */ |
| if (flags & (BDRV_O_CACHE_WB|BDRV_O_NOCACHE)) |
| bs->enable_write_cache = 1; |
| |
| /* |
| * Clear flags that are internal to the block layer before opening the |
| * image. |
| */ |
| open_flags = flags & ~(BDRV_O_SNAPSHOT | BDRV_O_NO_BACKING); |
| |
| /* |
| * Snapshots should be writeable. |
| */ |
| if (bs->is_temporary) { |
| open_flags |= BDRV_O_RDWR; |
| } |
| |
| /* Open the image, either directly or using a protocol */ |
| if (drv->bdrv_file_open) { |
| ret = drv->bdrv_file_open(bs, filename, open_flags); |
| } else { |
| ret = bdrv_file_open(&bs->file, filename, open_flags); |
| if (ret >= 0) { |
| ret = drv->bdrv_open(bs, open_flags); |
| } |
| } |
| |
| if (ret < 0) { |
| goto free_and_fail; |
| } |
| |
| bs->keep_read_only = bs->read_only = !(open_flags & BDRV_O_RDWR); |
| |
| ret = refresh_total_sectors(bs, bs->total_sectors); |
| if (ret < 0) { |
| goto free_and_fail; |
| } |
| |
| #ifndef _WIN32 |
| if (bs->is_temporary) { |
| unlink(filename); |
| } |
| #endif |
| return 0; |
| |
| free_and_fail: |
| if (bs->file) { |
| bdrv_delete(bs->file); |
| bs->file = NULL; |
| } |
| g_free(bs->opaque); |
| bs->opaque = NULL; |
| bs->drv = NULL; |
| return ret; |
| } |
| |
| /* |
| * Opens a file using a protocol (file, host_device, nbd, ...) |
| */ |
| int bdrv_file_open(BlockDriverState **pbs, const char *filename, int flags) |
| { |
| BlockDriverState *bs; |
| BlockDriver *drv; |
| int ret; |
| |
| drv = bdrv_find_protocol(filename); |
| if (!drv) { |
| return -ENOENT; |
| } |
| |
| bs = bdrv_new(""); |
| ret = bdrv_open_common(bs, filename, flags, drv); |
| if (ret < 0) { |
| bdrv_delete(bs); |
| return ret; |
| } |
| bs->growable = 1; |
| *pbs = bs; |
| return 0; |
| } |
| |
| /* |
| * Opens a disk image (raw, qcow2, vmdk, ...) |
| */ |
| int bdrv_open(BlockDriverState *bs, const char *filename, int flags, |
| BlockDriver *drv) |
| { |
| int ret; |
| int probed = 0; |
| |
| if (flags & BDRV_O_SNAPSHOT) { |
| BlockDriverState *bs1; |
| int64_t total_size; |
| int is_protocol = 0; |
| BlockDriver *bdrv_qcow2; |
| QEMUOptionParameter *options; |
| char tmp_filename[PATH_MAX]; |
| char backing_filename[PATH_MAX]; |
| |
| /* if snapshot, we create a temporary backing file and open it |
| instead of opening 'filename' directly */ |
| |
| /* if there is a backing file, use it */ |
| bs1 = bdrv_new(""); |
| ret = bdrv_open(bs1, filename, 0, drv); |
| if (ret < 0) { |
| bdrv_delete(bs1); |
| return ret; |
| } |
| total_size = bdrv_getlength(bs1) & BDRV_SECTOR_MASK; |
| |
| if (bs1->drv && bs1->drv->protocol_name) |
| is_protocol = 1; |
| |
| bdrv_delete(bs1); |
| |
| get_tmp_filename(tmp_filename, sizeof(tmp_filename)); |
| |
| /* Real path is meaningless for protocols */ |
| if (is_protocol) |
| snprintf(backing_filename, sizeof(backing_filename), |
| "%s", filename); |
| else if (!realpath(filename, backing_filename)) |
| return -errno; |
| |
| bdrv_qcow2 = bdrv_find_format("qcow2"); |
| options = parse_option_parameters("", bdrv_qcow2->create_options, NULL); |
| |
| set_option_parameter_int(options, BLOCK_OPT_SIZE, total_size); |
| set_option_parameter(options, BLOCK_OPT_BACKING_FILE, backing_filename); |
| if (drv) { |
| set_option_parameter(options, BLOCK_OPT_BACKING_FMT, |
| drv->format_name); |
| } |
| |
| ret = bdrv_create(bdrv_qcow2, tmp_filename, options); |
| free_option_parameters(options); |
| if (ret < 0) { |
| return ret; |
| } |
| |
| filename = tmp_filename; |
| drv = bdrv_qcow2; |
| bs->is_temporary = 1; |
| } |
| |
| /* Find the right image format driver */ |
| if (!drv) { |
| ret = find_image_format(filename, &drv); |
| probed = 1; |
| } |
| |
| if (!drv) { |
| goto unlink_and_fail; |
| } |
| |
| /* Open the image */ |
| ret = bdrv_open_common(bs, filename, flags, drv); |
| if (ret < 0) { |
| goto unlink_and_fail; |
| } |
| |
| bs->probed = probed; |
| |
| /* If there is a backing file, use it */ |
| if ((flags & BDRV_O_NO_BACKING) == 0 && bs->backing_file[0] != '\0') { |
| char backing_filename[PATH_MAX]; |
| int back_flags; |
| BlockDriver *back_drv = NULL; |
| |
| bs->backing_hd = bdrv_new(""); |
| path_combine(backing_filename, sizeof(backing_filename), |
| filename, bs->backing_file); |
| if (bs->backing_format[0] != '\0') |
| back_drv = bdrv_find_format(bs->backing_format); |
| |
| /* backing files always opened read-only */ |
| back_flags = |
| flags & ~(BDRV_O_RDWR | BDRV_O_SNAPSHOT | BDRV_O_NO_BACKING); |
| |
| ret = bdrv_open(bs->backing_hd, backing_filename, back_flags, back_drv); |
| if (ret < 0) { |
| bdrv_close(bs); |
| return ret; |
| } |
| if (bs->is_temporary) { |
| bs->backing_hd->keep_read_only = !(flags & BDRV_O_RDWR); |
| } else { |
| /* base image inherits from "parent" */ |
| bs->backing_hd->keep_read_only = bs->keep_read_only; |
| } |
| } |
| |
| if (!bdrv_key_required(bs)) { |
| /* call the change callback */ |
| bs->media_changed = 1; |
| if (bs->change_cb) |
| bs->change_cb(bs->change_opaque); |
| } |
| |
| return 0; |
| |
| unlink_and_fail: |
| if (bs->is_temporary) { |
| unlink(filename); |
| } |
| return ret; |
| } |
| |
| void bdrv_close(BlockDriverState *bs) |
| { |
| if (bs->drv) { |
| if (bs == bs_snapshots) { |
| bs_snapshots = NULL; |
| } |
| if (bs->backing_hd) { |
| bdrv_delete(bs->backing_hd); |
| bs->backing_hd = NULL; |
| } |
| bs->drv->bdrv_close(bs); |
| g_free(bs->opaque); |
| #ifdef _WIN32 |
| if (bs->is_temporary) { |
| unlink(bs->filename); |
| } |
| #endif |
| bs->opaque = NULL; |
| bs->drv = NULL; |
| |
| if (bs->file != NULL) { |
| bdrv_close(bs->file); |
| } |
| |
| /* call the change callback */ |
| bs->media_changed = 1; |
| if (bs->change_cb) |
| bs->change_cb(bs->change_opaque); |
| } |
| } |
| |
| void bdrv_close_all(void) |
| { |
| BlockDriverState *bs; |
| |
| QTAILQ_FOREACH(bs, &bdrv_states, list) { |
| bdrv_close(bs); |
| } |
| } |
| |
| void bdrv_delete(BlockDriverState *bs) |
| { |
| assert(!bs->peer); |
| |
| /* remove from list, if necessary */ |
| if (bs->device_name[0] != '\0') { |
| QTAILQ_REMOVE(&bdrv_states, bs, list); |
| } |
| |
| bdrv_close(bs); |
| if (bs->file != NULL) { |
| bdrv_delete(bs->file); |
| } |
| |
| assert(bs != bs_snapshots); |
| g_free(bs); |
| } |
| |
| int bdrv_attach(BlockDriverState *bs, DeviceState *qdev) |
| { |
| if (bs->peer) { |
| return -EBUSY; |
| } |
| bs->peer = qdev; |
| return 0; |
| } |
| |
| void bdrv_detach(BlockDriverState *bs, DeviceState *qdev) |
| { |
| assert(bs->peer == qdev); |
| bs->peer = NULL; |
| } |
| |
| DeviceState *bdrv_get_attached(BlockDriverState *bs) |
| { |
| return bs->peer; |
| } |
| |
| /* |
| * Run consistency checks on an image |
| * |
| * Returns 0 if the check could be completed (it doesn't mean that the image is |
| * free of errors) or -errno when an internal error occured. The results of the |
| * check are stored in res. |
| */ |
| int bdrv_check(BlockDriverState *bs, BdrvCheckResult *res) |
| { |
| if (bs->drv->bdrv_check == NULL) { |
| return -ENOTSUP; |
| } |
| |
| memset(res, 0, sizeof(*res)); |
| return bs->drv->bdrv_check(bs, res); |
| } |
| |
| #define COMMIT_BUF_SECTORS 2048 |
| |
| /* commit COW file into the raw image */ |
| int bdrv_commit(BlockDriverState *bs) |
| { |
| BlockDriver *drv = bs->drv; |
| int64_t sector, total_sectors; |
| int n, ro, open_flags; |
| int ret = 0, rw_ret = 0; |
| uint8_t *buf; |
| char filename[1024]; |
| BlockDriverState *bs_rw, *bs_ro; |
| |
| if (!drv) |
| return -ENOMEDIUM; |
| |
| if (!bs->backing_hd) { |
| return -ENOTSUP; |
| } |
| |
| if (bs->backing_hd->keep_read_only) { |
| return -EACCES; |
| } |
| |
| ro = bs->backing_hd->read_only; |
| strncpy(filename, bs->backing_hd->filename, sizeof(filename)); |
| open_flags = bs->backing_hd->open_flags; |
| |
| if (ro) { |
| /* re-open as RW */ |
| bdrv_delete(bs->backing_hd); |
| bs->backing_hd = NULL; |
| bs_rw = bdrv_new(""); |
| rw_ret = bdrv_open(bs_rw, filename, open_flags | BDRV_O_RDWR, drv); |
| if (rw_ret < 0) { |
| bdrv_delete(bs_rw); |
| /* try to re-open read-only */ |
| bs_ro = bdrv_new(""); |
| ret = bdrv_open(bs_ro, filename, open_flags & ~BDRV_O_RDWR, drv); |
| if (ret < 0) { |
| bdrv_delete(bs_ro); |
| /* drive not functional anymore */ |
| bs->drv = NULL; |
| return ret; |
| } |
| bs->backing_hd = bs_ro; |
| return rw_ret; |
| } |
| bs->backing_hd = bs_rw; |
| } |
| |
| total_sectors = bdrv_getlength(bs) >> BDRV_SECTOR_BITS; |
| buf = g_malloc(COMMIT_BUF_SECTORS * BDRV_SECTOR_SIZE); |
| |
| for (sector = 0; sector < total_sectors; sector += n) { |
| if (drv->bdrv_is_allocated(bs, sector, COMMIT_BUF_SECTORS, &n)) { |
| |
| if (bdrv_read(bs, sector, buf, n) != 0) { |
| ret = -EIO; |
| goto ro_cleanup; |
| } |
| |
| if (bdrv_write(bs->backing_hd, sector, buf, n) != 0) { |
| ret = -EIO; |
| goto ro_cleanup; |
| } |
| } |
| } |
| |
| if (drv->bdrv_make_empty) { |
| ret = drv->bdrv_make_empty(bs); |
| bdrv_flush(bs); |
| } |
| |
| /* |
| * Make sure all data we wrote to the backing device is actually |
| * stable on disk. |
| */ |
| if (bs->backing_hd) |
| bdrv_flush(bs->backing_hd); |
| |
| ro_cleanup: |
| g_free(buf); |
| |
| if (ro) { |
| /* re-open as RO */ |
| bdrv_delete(bs->backing_hd); |
| bs->backing_hd = NULL; |
| bs_ro = bdrv_new(""); |
| ret = bdrv_open(bs_ro, filename, open_flags & ~BDRV_O_RDWR, drv); |
| if (ret < 0) { |
| bdrv_delete(bs_ro); |
| /* drive not functional anymore */ |
| bs->drv = NULL; |
| return ret; |
| } |
| bs->backing_hd = bs_ro; |
| bs->backing_hd->keep_read_only = 0; |
| } |
| |
| return ret; |
| } |
| |
| void bdrv_commit_all(void) |
| { |
| BlockDriverState *bs; |
| |
| QTAILQ_FOREACH(bs, &bdrv_states, list) { |
| bdrv_commit(bs); |
| } |
| } |
| |
| /* |
| * Return values: |
| * 0 - success |
| * -EINVAL - backing format specified, but no file |
| * -ENOSPC - can't update the backing file because no space is left in the |
| * image file header |
| * -ENOTSUP - format driver doesn't support changing the backing file |
| */ |
| int bdrv_change_backing_file(BlockDriverState *bs, |
| const char *backing_file, const char *backing_fmt) |
| { |
| BlockDriver *drv = bs->drv; |
| |
| if (drv->bdrv_change_backing_file != NULL) { |
| return drv->bdrv_change_backing_file(bs, backing_file, backing_fmt); |
| } else { |
| return -ENOTSUP; |
| } |
| } |
| |
| static int bdrv_check_byte_request(BlockDriverState *bs, int64_t offset, |
| size_t size) |
| { |
| int64_t len; |
| |
| if (!bdrv_is_inserted(bs)) |
| return -ENOMEDIUM; |
| |
| if (bs->growable) |
| return 0; |
| |
| len = bdrv_getlength(bs); |
| |
| if (offset < 0) |
| return -EIO; |
| |
| if ((offset > len) || (len - offset < size)) |
| return -EIO; |
| |
| return 0; |
| } |
| |
| static int bdrv_check_request(BlockDriverState *bs, int64_t sector_num, |
| int nb_sectors) |
| { |
| return bdrv_check_byte_request(bs, sector_num * BDRV_SECTOR_SIZE, |
| nb_sectors * BDRV_SECTOR_SIZE); |
| } |
| |
| /* return < 0 if error. See bdrv_write() for the return codes */ |
| int bdrv_read(BlockDriverState *bs, int64_t sector_num, |
| uint8_t *buf, int nb_sectors) |
| { |
| BlockDriver *drv = bs->drv; |
| |
| if (!drv) |
| return -ENOMEDIUM; |
| if (bdrv_check_request(bs, sector_num, nb_sectors)) |
| return -EIO; |
| |
| return drv->bdrv_read(bs, sector_num, buf, nb_sectors); |
| } |
| |
| static void set_dirty_bitmap(BlockDriverState *bs, int64_t sector_num, |
| int nb_sectors, int dirty) |
| { |
| int64_t start, end; |
| unsigned long val, idx, bit; |
| |
| start = sector_num / BDRV_SECTORS_PER_DIRTY_CHUNK; |
| end = (sector_num + nb_sectors - 1) / BDRV_SECTORS_PER_DIRTY_CHUNK; |
| |
| for (; start <= end; start++) { |
| idx = start / (sizeof(unsigned long) * 8); |
| bit = start % (sizeof(unsigned long) * 8); |
| val = bs->dirty_bitmap[idx]; |
| if (dirty) { |
| if (!(val & (1 << bit))) { |
| bs->dirty_count++; |
| val |= 1 << bit; |
| } |
| } else { |
| if (val & (1 << bit)) { |
| bs->dirty_count--; |
| val &= ~(1 << bit); |
| } |
| } |
| bs->dirty_bitmap[idx] = val; |
| } |
| } |
| |
| /* Return < 0 if error. Important errors are: |
| -EIO generic I/O error (may happen for all errors) |
| -ENOMEDIUM No media inserted. |
| -EINVAL Invalid sector number or nb_sectors |
| -EACCES Trying to write a read-only device |
| */ |
| int bdrv_write(BlockDriverState *bs, int64_t sector_num, |
| const uint8_t *buf, int nb_sectors) |
| { |
| BlockDriver *drv = bs->drv; |
| if (!bs->drv) |
| return -ENOMEDIUM; |
| if (bs->read_only) |
| return -EACCES; |
| if (bdrv_check_request(bs, sector_num, nb_sectors)) |
| return -EIO; |
| |
| if (bs->dirty_bitmap) { |
| set_dirty_bitmap(bs, sector_num, nb_sectors, 1); |
| } |
| |
| if (bs->wr_highest_sector < sector_num + nb_sectors - 1) { |
| bs->wr_highest_sector = sector_num + nb_sectors - 1; |
| } |
| |
| return drv->bdrv_write(bs, sector_num, buf, nb_sectors); |
| } |
| |
| int bdrv_pread(BlockDriverState *bs, int64_t offset, |
| void *buf, int count1) |
| { |
| uint8_t tmp_buf[BDRV_SECTOR_SIZE]; |
| int len, nb_sectors, count; |
| int64_t sector_num; |
| int ret; |
| |
| count = count1; |
| /* first read to align to sector start */ |
| len = (BDRV_SECTOR_SIZE - offset) & (BDRV_SECTOR_SIZE - 1); |
| if (len > count) |
| len = count; |
| sector_num = offset >> BDRV_SECTOR_BITS; |
| if (len > 0) { |
| if ((ret = bdrv_read(bs, sector_num, tmp_buf, 1)) < 0) |
| return ret; |
| memcpy(buf, tmp_buf + (offset & (BDRV_SECTOR_SIZE - 1)), len); |
| count -= len; |
| if (count == 0) |
| return count1; |
| sector_num++; |
| buf += len; |
| } |
| |
| /* read the sectors "in place" */ |
| nb_sectors = count >> BDRV_SECTOR_BITS; |
| if (nb_sectors > 0) { |
| if ((ret = bdrv_read(bs, sector_num, buf, nb_sectors)) < 0) |
| return ret; |
| sector_num += nb_sectors; |
| len = nb_sectors << BDRV_SECTOR_BITS; |
| buf += len; |
| count -= len; |
| } |
| |
| /* add data from the last sector */ |
| if (count > 0) { |
| if ((ret = bdrv_read(bs, sector_num, tmp_buf, 1)) < 0) |
| return ret; |
| memcpy(buf, tmp_buf, count); |
| } |
| return count1; |
| } |
| |
| int bdrv_pwrite(BlockDriverState *bs, int64_t offset, |
| const void *buf, int count1) |
| { |
| uint8_t tmp_buf[BDRV_SECTOR_SIZE]; |
| int len, nb_sectors, count; |
| int64_t sector_num; |
| int ret; |
| |
| count = count1; |
| /* first write to align to sector start */ |
| len = (BDRV_SECTOR_SIZE - offset) & (BDRV_SECTOR_SIZE - 1); |
| if (len > count) |
| len = count; |
| sector_num = offset >> BDRV_SECTOR_BITS; |
| if (len > 0) { |
| if ((ret = bdrv_read(bs, sector_num, tmp_buf, 1)) < 0) |
| return ret; |
| memcpy(tmp_buf + (offset & (BDRV_SECTOR_SIZE - 1)), buf, len); |
| if ((ret = bdrv_write(bs, sector_num, tmp_buf, 1)) < 0) |
| return ret; |
| count -= len; |
| if (count == 0) |
| return count1; |
| sector_num++; |
| buf += len; |
| } |
| |
| /* write the sectors "in place" */ |
| nb_sectors = count >> BDRV_SECTOR_BITS; |
| if (nb_sectors > 0) { |
| if ((ret = bdrv_write(bs, sector_num, buf, nb_sectors)) < 0) |
| return ret; |
| sector_num += nb_sectors; |
| len = nb_sectors << BDRV_SECTOR_BITS; |
| buf += len; |
| count -= len; |
| } |
| |
| /* add data from the last sector */ |
| if (count > 0) { |
| if ((ret = bdrv_read(bs, sector_num, tmp_buf, 1)) < 0) |
| return ret; |
| memcpy(tmp_buf, buf, count); |
| if ((ret = bdrv_write(bs, sector_num, tmp_buf, 1)) < 0) |
| return ret; |
| } |
| return count1; |
| } |
| |
| /* |
| * Writes to the file and ensures that no writes are reordered across this |
| * request (acts as a barrier) |
| * |
| * Returns 0 on success, -errno in error cases. |
| */ |
| int bdrv_pwrite_sync(BlockDriverState *bs, int64_t offset, |
| const void *buf, int count) |
| { |
| int ret; |
| |
| ret = bdrv_pwrite(bs, offset, buf, count); |
| if (ret < 0) { |
| return ret; |
| } |
| |
| /* No flush needed for cache=writethrough, it uses O_DSYNC */ |
| if ((bs->open_flags & BDRV_O_CACHE_MASK) != 0) { |
| bdrv_flush(bs); |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * Writes to the file and ensures that no writes are reordered across this |
| * request (acts as a barrier) |
| * |
| * Returns 0 on success, -errno in error cases. |
| */ |
| int bdrv_write_sync(BlockDriverState *bs, int64_t sector_num, |
| const uint8_t *buf, int nb_sectors) |
| { |
| return bdrv_pwrite_sync(bs, BDRV_SECTOR_SIZE * sector_num, |
| buf, BDRV_SECTOR_SIZE * nb_sectors); |
| } |
| |
| /** |
| * Truncate file to 'offset' bytes (needed only for file protocols) |
| */ |
| int bdrv_truncate(BlockDriverState *bs, int64_t offset) |
| { |
| BlockDriver *drv = bs->drv; |
| int ret; |
| if (!drv) |
| return -ENOMEDIUM; |
| if (!drv->bdrv_truncate) |
| return -ENOTSUP; |
| if (bs->read_only) |
| return -EACCES; |
| ret = drv->bdrv_truncate(bs, offset); |
| if (ret == 0) { |
| ret = refresh_total_sectors(bs, offset >> BDRV_SECTOR_BITS); |
| } |
| return ret; |
| } |
| |
| /** |
| * Length of a file in bytes. Return < 0 if error or unknown. |
| */ |
| int64_t bdrv_getlength(BlockDriverState *bs) |
| { |
| BlockDriver *drv = bs->drv; |
| if (!drv) |
| return -ENOMEDIUM; |
| |
| /* Fixed size devices use the total_sectors value for speed instead of |
| issuing a length query (like lseek) on each call. Also, legacy block |
| drivers don't provide a bdrv_getlength function and must use |
| total_sectors. */ |
| if (!bs->growable || !drv->bdrv_getlength) { |
| return bs->total_sectors * BDRV_SECTOR_SIZE; |
| } |
| return drv->bdrv_getlength(bs); |
| } |
| |
| /* return 0 as number of sectors if no device present or error */ |
| void bdrv_get_geometry(BlockDriverState *bs, uint64_t *nb_sectors_ptr) |
| { |
| int64_t length; |
| length = bdrv_getlength(bs); |
| if (length < 0) |
| length = 0; |
| else |
| length = length >> BDRV_SECTOR_BITS; |
| *nb_sectors_ptr = length; |
| } |
| |
| struct partition { |
| uint8_t boot_ind; /* 0x80 - active */ |
| uint8_t head; /* starting head */ |
| uint8_t sector; /* starting sector */ |
| uint8_t cyl; /* starting cylinder */ |
| uint8_t sys_ind; /* What partition type */ |
| uint8_t end_head; /* end head */ |
| uint8_t end_sector; /* end sector */ |
| uint8_t end_cyl; /* end cylinder */ |
| uint32_t start_sect; /* starting sector counting from 0 */ |
| uint32_t nr_sects; /* nr of sectors in partition */ |
| } __attribute__((packed)); |
| |
| /* try to guess the disk logical geometry from the MSDOS partition table. Return 0 if OK, -1 if could not guess */ |
| static int guess_disk_lchs(BlockDriverState *bs, |
| int *pcylinders, int *pheads, int *psectors) |
| { |
| uint8_t buf[BDRV_SECTOR_SIZE]; |
| int ret, i, heads, sectors, cylinders; |
| struct partition *p; |
| uint32_t nr_sects; |
| uint64_t nb_sectors; |
| |
| bdrv_get_geometry(bs, &nb_sectors); |
| |
| ret = bdrv_read(bs, 0, buf, 1); |
| if (ret < 0) |
| return -1; |
| /* test msdos magic */ |
| if (buf[510] != 0x55 || buf[511] != 0xaa) |
| return -1; |
| for(i = 0; i < 4; i++) { |
| p = ((struct partition *)(buf + 0x1be)) + i; |
| nr_sects = le32_to_cpu(p->nr_sects); |
| if (nr_sects && p->end_head) { |
| /* We make the assumption that the partition terminates on |
| a cylinder boundary */ |
| heads = p->end_head + 1; |
| sectors = p->end_sector & 63; |
| if (sectors == 0) |
| continue; |
| cylinders = nb_sectors / (heads * sectors); |
| if (cylinders < 1 || cylinders > 16383) |
| continue; |
| *pheads = heads; |
| *psectors = sectors; |
| *pcylinders = cylinders; |
| #if 0 |
| printf("guessed geometry: LCHS=%d %d %d\n", |
| cylinders, heads, sectors); |
| #endif |
| return 0; |
| } |
| } |
| return -1; |
| } |
| |
| void bdrv_guess_geometry(BlockDriverState *bs, int *pcyls, int *pheads, int *psecs) |
| { |
| int translation, lba_detected = 0; |
| int cylinders, heads, secs; |
| uint64_t nb_sectors; |
| |
| /* if a geometry hint is available, use it */ |
| bdrv_get_geometry(bs, &nb_sectors); |
| bdrv_get_geometry_hint(bs, &cylinders, &heads, &secs); |
| translation = bdrv_get_translation_hint(bs); |
| if (cylinders != 0) { |
| *pcyls = cylinders; |
| *pheads = heads; |
| *psecs = secs; |
| } else { |
| if (guess_disk_lchs(bs, &cylinders, &heads, &secs) == 0) { |
| if (heads > 16) { |
| /* if heads > 16, it means that a BIOS LBA |
| translation was active, so the default |
| hardware geometry is OK */ |
| lba_detected = 1; |
| goto default_geometry; |
| } else { |
| *pcyls = cylinders; |
| *pheads = heads; |
| *psecs = secs; |
| /* disable any translation to be in sync with |
| the logical geometry */ |
| if (translation == BIOS_ATA_TRANSLATION_AUTO) { |
| bdrv_set_translation_hint(bs, |
| BIOS_ATA_TRANSLATION_NONE); |
| } |
| } |
| } else { |
| default_geometry: |
| /* if no geometry, use a standard physical disk geometry */ |
| cylinders = nb_sectors / (16 * 63); |
| |
| if (cylinders > 16383) |
| cylinders = 16383; |
| else if (cylinders < 2) |
| cylinders = 2; |
| *pcyls = cylinders; |
| *pheads = 16; |
| *psecs = 63; |
| if ((lba_detected == 1) && (translation == BIOS_ATA_TRANSLATION_AUTO)) { |
| if ((*pcyls * *pheads) <= 131072) { |
| bdrv_set_translation_hint(bs, |
| BIOS_ATA_TRANSLATION_LARGE); |
| } else { |
| bdrv_set_translation_hint(bs, |
| BIOS_ATA_TRANSLATION_LBA); |
| } |
| } |
| } |
| bdrv_set_geometry_hint(bs, *pcyls, *pheads, *psecs); |
| } |
| } |
| |
| void bdrv_set_geometry_hint(BlockDriverState *bs, |
| int cyls, int heads, int secs) |
| { |
| bs->cyls = cyls; |
| bs->heads = heads; |
| bs->secs = secs; |
| } |
| |
| void bdrv_set_type_hint(BlockDriverState *bs, int type) |
| { |
| bs->type = type; |
| bs->removable = ((type == BDRV_TYPE_CDROM || |
| type == BDRV_TYPE_FLOPPY)); |
| } |
| |
| void bdrv_set_translation_hint(BlockDriverState *bs, int translation) |
| { |
| bs->translation = translation; |
| } |
| |
| void bdrv_get_geometry_hint(BlockDriverState *bs, |
| int *pcyls, int *pheads, int *psecs) |
| { |
| *pcyls = bs->cyls; |
| *pheads = bs->heads; |
| *psecs = bs->secs; |
| } |
| |
| int bdrv_get_type_hint(BlockDriverState *bs) |
| { |
| return bs->type; |
| } |
| |
| int bdrv_get_translation_hint(BlockDriverState *bs) |
| { |
| return bs->translation; |
| } |
| |
| void bdrv_set_on_error(BlockDriverState *bs, BlockErrorAction on_read_error, |
| BlockErrorAction on_write_error) |
| { |
| bs->on_read_error = on_read_error; |
| bs->on_write_error = on_write_error; |
| } |
| |
| BlockErrorAction bdrv_get_on_error(BlockDriverState *bs, int is_read) |
| { |
| return is_read ? bs->on_read_error : bs->on_write_error; |
| } |
| |
| void bdrv_set_removable(BlockDriverState *bs, int removable) |
| { |
| bs->removable = removable; |
| if (removable && bs == bs_snapshots) { |
| bs_snapshots = NULL; |
| } |
| } |
| |
| int bdrv_is_removable(BlockDriverState *bs) |
| { |
| return bs->removable; |
| } |
| |
| int bdrv_is_read_only(BlockDriverState *bs) |
| { |
| return bs->read_only; |
| } |
| |
| int bdrv_is_sg(BlockDriverState *bs) |
| { |
| return bs->sg; |
| } |
| |
| int bdrv_enable_write_cache(BlockDriverState *bs) |
| { |
| return bs->enable_write_cache; |
| } |
| |
| /* XXX: no longer used */ |
| void bdrv_set_change_cb(BlockDriverState *bs, |
| void (*change_cb)(void *opaque), void *opaque) |
| { |
| bs->change_cb = change_cb; |
| bs->change_opaque = opaque; |
| } |
| |
| int bdrv_is_encrypted(BlockDriverState *bs) |
| { |
| if (bs->backing_hd && bs->backing_hd->encrypted) |
| return 1; |
| return bs->encrypted; |
| } |
| |
| int bdrv_key_required(BlockDriverState *bs) |
| { |
| BlockDriverState *backing_hd = bs->backing_hd; |
| |
| if (backing_hd && backing_hd->encrypted && !backing_hd->valid_key) |
| return 1; |
| return (bs->encrypted && !bs->valid_key); |
| } |
| |
| int bdrv_set_key(BlockDriverState *bs, const char *key) |
| { |
| int ret; |
| if (bs->backing_hd && bs->backing_hd->encrypted) { |
| ret = bdrv_set_key(bs->backing_hd, key); |
| if (ret < 0) |
| return ret; |
| if (!bs->encrypted) |
| return 0; |
| } |
| if (!bs->encrypted) { |
| return -EINVAL; |
| } else if (!bs->drv || !bs->drv->bdrv_set_key) { |
| return -ENOMEDIUM; |
| } |
| ret = bs->drv->bdrv_set_key(bs, key); |
| if (ret < 0) { |
| bs->valid_key = 0; |
| } else if (!bs->valid_key) { |
| bs->valid_key = 1; |
| /* call the change callback now, we skipped it on open */ |
| bs->media_changed = 1; |
| if (bs->change_cb) |
| bs->change_cb(bs->change_opaque); |
| } |
| return ret; |
| } |
| |
| void bdrv_get_format(BlockDriverState *bs, char *buf, int buf_size) |
| { |
| if (!bs->drv) { |
| buf[0] = '\0'; |
| } else { |
| pstrcpy(buf, buf_size, bs->drv->format_name); |
| } |
| } |
| |
| void bdrv_iterate_format(void (*it)(void *opaque, const char *name), |
| void *opaque) |
| { |
| BlockDriver *drv; |
| |
| QLIST_FOREACH(drv, &bdrv_drivers, list) { |
| it(opaque, drv->format_name); |
| } |
| } |
| |
| BlockDriverState *bdrv_find(const char *name) |
| { |
| BlockDriverState *bs; |
| |
| QTAILQ_FOREACH(bs, &bdrv_states, list) { |
| if (!strcmp(name, bs->device_name)) { |
| return bs; |
| } |
| } |
| return NULL; |
| } |
| |
| BlockDriverState *bdrv_next(BlockDriverState *bs) |
| { |
| if (!bs) { |
| return QTAILQ_FIRST(&bdrv_states); |
| } |
| return QTAILQ_NEXT(bs, list); |
| } |
| |
| void bdrv_iterate(void (*it)(void *opaque, BlockDriverState *bs), void *opaque) |
| { |
| BlockDriverState *bs; |
| |
| QTAILQ_FOREACH(bs, &bdrv_states, list) { |
| it(opaque, bs); |
| } |
| } |
| |
| const char *bdrv_get_device_name(BlockDriverState *bs) |
| { |
| return bs->device_name; |
| } |
| |
| void bdrv_flush(BlockDriverState *bs) |
| { |
| if (bs->open_flags & BDRV_O_NO_FLUSH) { |
| return; |
| } |
| |
| if (bs->drv && bs->drv->bdrv_flush) |
| bs->drv->bdrv_flush(bs); |
| } |
| |
| void bdrv_flush_all(void) |
| { |
| BlockDriverState *bs; |
| |
| QTAILQ_FOREACH(bs, &bdrv_states, list) { |
| if (bs->drv && !bdrv_is_read_only(bs) && |
| (!bdrv_is_removable(bs) || bdrv_is_inserted(bs))) { |
| bdrv_flush(bs); |
| } |
| } |
| } |
| |
| int bdrv_has_zero_init(BlockDriverState *bs) |
| { |
| assert(bs->drv); |
| |
| if (bs->drv->bdrv_has_zero_init) { |
| return bs->drv->bdrv_has_zero_init(bs); |
| } |
| |
| return 1; |
| } |
| |
| /* |
| * Returns true iff the specified sector is present in the disk image. Drivers |
| * not implementing the functionality are assumed to not support backing files, |
| * hence all their sectors are reported as allocated. |
| * |
| * 'pnum' is set to the number of sectors (including and immediately following |
| * the specified sector) that are known to be in the same |
| * allocated/unallocated state. |
| * |
| * 'nb_sectors' is the max value 'pnum' should be set to. |
| */ |
| int bdrv_is_allocated(BlockDriverState *bs, int64_t sector_num, int nb_sectors, |
| int *pnum) |
| { |
| int64_t n; |
| if (!bs->drv->bdrv_is_allocated) { |
| if (sector_num >= bs->total_sectors) { |
| *pnum = 0; |
| return 0; |
| } |
| n = bs->total_sectors - sector_num; |
| *pnum = (n < nb_sectors) ? (n) : (nb_sectors); |
| return 1; |
| } |
| return bs->drv->bdrv_is_allocated(bs, sector_num, nb_sectors, pnum); |
| } |
| |
| void bdrv_mon_event(const BlockDriverState *bdrv, |
| BlockMonEventAction action, int is_read) |
| { |
| QObject *data; |
| const char *action_str; |
| |
| switch (action) { |
| case BDRV_ACTION_REPORT: |
| action_str = "report"; |
| break; |
| case BDRV_ACTION_IGNORE: |
| action_str = "ignore"; |
| break; |
| case BDRV_ACTION_STOP: |
| action_str = "stop"; |
| break; |
| default: |
| abort(); |
| } |
| |
| data = qobject_from_jsonf("{ 'device': %s, 'action': %s, 'operation': %s }", |
| bdrv->device_name, |
| action_str, |
| is_read ? "read" : "write"); |
| monitor_protocol_event(QEVENT_BLOCK_IO_ERROR, data); |
| |
| qobject_decref(data); |
| } |
| |
| static void bdrv_print_dict(QObject *obj, void *opaque) |
| { |
| QDict *bs_dict; |
| Monitor *mon = opaque; |
| |
| bs_dict = qobject_to_qdict(obj); |
| |
| monitor_printf(mon, "%s: type=%s removable=%d", |
| qdict_get_str(bs_dict, "device"), |
| qdict_get_str(bs_dict, "type"), |
| qdict_get_bool(bs_dict, "removable")); |
| |
| if (qdict_get_bool(bs_dict, "removable")) { |
| monitor_printf(mon, " locked=%d", qdict_get_bool(bs_dict, "locked")); |
| } |
| |
| if (qdict_haskey(bs_dict, "inserted")) { |
| QDict *qdict = qobject_to_qdict(qdict_get(bs_dict, "inserted")); |
| |
| monitor_printf(mon, " file="); |
| monitor_print_filename(mon, qdict_get_str(qdict, "file")); |
| if (qdict_haskey(qdict, "backing_file")) { |
| monitor_printf(mon, " backing_file="); |
| monitor_print_filename(mon, qdict_get_str(qdict, "backing_file")); |
| } |
| monitor_printf(mon, " ro=%d drv=%s encrypted=%d", |
| qdict_get_bool(qdict, "ro"), |
| qdict_get_str(qdict, "drv"), |
| qdict_get_bool(qdict, "encrypted")); |
| } else { |
| monitor_printf(mon, " [not inserted]"); |
| } |
| |
| monitor_printf(mon, "\n"); |
| } |
| |
| void bdrv_info_print(Monitor *mon, const QObject *data) |
| { |
| qlist_iter(qobject_to_qlist(data), bdrv_print_dict, mon); |
| } |
| |
| void bdrv_info(Monitor *mon, QObject **ret_data) |
| { |
| QList *bs_list; |
| BlockDriverState *bs; |
| |
| bs_list = qlist_new(); |
| |
| QTAILQ_FOREACH(bs, &bdrv_states, list) { |
| QObject *bs_obj; |
| const char *type = "unknown"; |
| |
| switch(bs->type) { |
| case BDRV_TYPE_HD: |
| type = "hd"; |
| break; |
| case BDRV_TYPE_CDROM: |
| type = "cdrom"; |
| break; |
| case BDRV_TYPE_FLOPPY: |
| type = "floppy"; |
| break; |
| } |
| |
| bs_obj = qobject_from_jsonf("{ 'device': %s, 'type': %s, " |
| "'removable': %i, 'locked': %i }", |
| bs->device_name, type, bs->removable, |
| bs->locked); |
| |
| if (bs->drv) { |
| QObject *obj; |
| QDict *bs_dict = qobject_to_qdict(bs_obj); |
| |
| obj = qobject_from_jsonf("{ 'file': %s, 'ro': %i, 'drv': %s, " |
| "'encrypted': %i }", |
| bs->filename, bs->read_only, |
| bs->drv->format_name, |
| bdrv_is_encrypted(bs)); |
| if (bs->backing_file[0] != '\0') { |
| QDict *qdict = qobject_to_qdict(obj); |
| qdict_put(qdict, "backing_file", |
| qstring_from_str(bs->backing_file)); |
| } |
| |
| qdict_put_obj(bs_dict, "inserted", obj); |
| } |
| qlist_append_obj(bs_list, bs_obj); |
| } |
| |
| *ret_data = QOBJECT(bs_list); |
| } |
| |
| static void bdrv_stats_iter(QObject *data, void *opaque) |
| { |
| QDict *qdict; |
| Monitor *mon = opaque; |
| |
| qdict = qobject_to_qdict(data); |
| monitor_printf(mon, "%s:", qdict_get_str(qdict, "device")); |
| |
| qdict = qobject_to_qdict(qdict_get(qdict, "stats")); |
| monitor_printf(mon, " rd_bytes=%" PRId64 |
| " wr_bytes=%" PRId64 |
| " rd_operations=%" PRId64 |
| " wr_operations=%" PRId64 |
| "\n", |
| qdict_get_int(qdict, "rd_bytes"), |
| qdict_get_int(qdict, "wr_bytes"), |
| qdict_get_int(qdict, "rd_operations"), |
| qdict_get_int(qdict, "wr_operations")); |
| } |
| |
| void bdrv_stats_print(Monitor *mon, const QObject *data) |
| { |
| qlist_iter(qobject_to_qlist(data), bdrv_stats_iter, mon); |
| } |
| |
| static QObject* bdrv_info_stats_bs(BlockDriverState *bs) |
| { |
| QObject *res; |
| QDict *dict; |
| |
| res = qobject_from_jsonf("{ 'stats': {" |
| "'rd_bytes': %" PRId64 "," |
| "'wr_bytes': %" PRId64 "," |
| "'rd_operations': %" PRId64 "," |
| "'wr_operations': %" PRId64 "," |
| "'wr_highest_offset': %" PRId64 |
| "} }", |
| bs->rd_bytes, bs->wr_bytes, |
| bs->rd_ops, bs->wr_ops, |
| bs->wr_highest_sector * |
| (uint64_t)BDRV_SECTOR_SIZE); |
| dict = qobject_to_qdict(res); |
| |
| if (*bs->device_name) { |
| qdict_put(dict, "device", qstring_from_str(bs->device_name)); |
| } |
| |
| if (bs->file) { |
| QObject *parent = bdrv_info_stats_bs(bs->file); |
| qdict_put_obj(dict, "parent", parent); |
| } |
| |
| return res; |
| } |
| |
| void bdrv_info_stats(Monitor *mon, QObject **ret_data) |
| { |
| QObject *obj; |
| QList *devices; |
| BlockDriverState *bs; |
| |
| devices = qlist_new(); |
| |
| QTAILQ_FOREACH(bs, &bdrv_states, list) { |
| obj = bdrv_info_stats_bs(bs); |
| qlist_append_obj(devices, obj); |
| } |
| |
| *ret_data = QOBJECT(devices); |
| } |
| |
| const char *bdrv_get_encrypted_filename(BlockDriverState *bs) |
| { |
| if (bs->backing_hd && bs->backing_hd->encrypted) |
| return bs->backing_file; |
| else if (bs->encrypted) |
| return bs->filename; |
| else |
| return NULL; |
| } |
| |
| void bdrv_get_backing_filename(BlockDriverState *bs, |
| char *filename, int filename_size) |
| { |
| if (!bs->backing_file) { |
| pstrcpy(filename, filename_size, ""); |
| } else { |
| pstrcpy(filename, filename_size, bs->backing_file); |
| } |
| } |
| |
| int bdrv_write_compressed(BlockDriverState *bs, int64_t sector_num, |
| const uint8_t *buf, int nb_sectors) |
| { |
| BlockDriver *drv = bs->drv; |
| if (!drv) |
| return -ENOMEDIUM; |
| if (!drv->bdrv_write_compressed) |
| return -ENOTSUP; |
| if (bdrv_check_request(bs, sector_num, nb_sectors)) |
| return -EIO; |
| |
| if (bs->dirty_bitmap) { |
| set_dirty_bitmap(bs, sector_num, nb_sectors, 1); |
| } |
| |
| return drv->bdrv_write_compressed(bs, sector_num, buf, nb_sectors); |
| } |
| |
| int bdrv_get_info(BlockDriverState *bs, BlockDriverInfo *bdi) |
| { |
| BlockDriver *drv = bs->drv; |
| if (!drv) |
| return -ENOMEDIUM; |
| if (!drv->bdrv_get_info) |
| return -ENOTSUP; |
| memset(bdi, 0, sizeof(*bdi)); |
| return drv->bdrv_get_info(bs, bdi); |
| } |
| |
| int bdrv_save_vmstate(BlockDriverState *bs, const uint8_t *buf, |
| int64_t pos, int size) |
| { |
| BlockDriver *drv = bs->drv; |
| if (!drv) |
| return -ENOMEDIUM; |
| if (drv->bdrv_save_vmstate) |
| return drv->bdrv_save_vmstate(bs, buf, pos, size); |
| if (bs->file) |
| return bdrv_save_vmstate(bs->file, buf, pos, size); |
| return -ENOTSUP; |
| } |
| |
| int bdrv_load_vmstate(BlockDriverState *bs, uint8_t *buf, |
| int64_t pos, int size) |
| { |
| BlockDriver *drv = bs->drv; |
| if (!drv) |
| return -ENOMEDIUM; |
| if (drv->bdrv_load_vmstate) |
| return drv->bdrv_load_vmstate(bs, buf, pos, size); |
| if (bs->file) |
| return bdrv_load_vmstate(bs->file, buf, pos, size); |
| return -ENOTSUP; |
| } |
| |
| void bdrv_debug_event(BlockDriverState *bs, BlkDebugEvent event) |
| { |
| BlockDriver *drv = bs->drv; |
| |
| if (!drv || !drv->bdrv_debug_event) { |
| return; |
| } |
| |
| return drv->bdrv_debug_event(bs, event); |
| |
| } |
| |
| /**************************************************************/ |
| /* handling of snapshots */ |
| |
| int bdrv_can_snapshot(BlockDriverState *bs) |
| { |
| BlockDriver *drv = bs->drv; |
| if (!drv || bdrv_is_removable(bs) || bdrv_is_read_only(bs)) { |
| return 0; |
| } |
| |
| if (!drv->bdrv_snapshot_create) { |
| if (bs->file != NULL) { |
| return bdrv_can_snapshot(bs->file); |
| } |
| return 0; |
| } |
| |
| return 1; |
| } |
| |
| int bdrv_is_snapshot(BlockDriverState *bs) |
| { |
| return !!(bs->open_flags & BDRV_O_SNAPSHOT); |
| } |
| |
| BlockDriverState *bdrv_snapshots(void) |
| { |
| BlockDriverState *bs; |
| |
| if (bs_snapshots) { |
| return bs_snapshots; |
| } |
| |
| bs = NULL; |
| while ((bs = bdrv_next(bs))) { |
| if (bdrv_can_snapshot(bs)) { |
| bs_snapshots = bs; |
| return bs; |
| } |
| } |
| return NULL; |
| } |
| |
| int bdrv_snapshot_create(BlockDriverState *bs, |
| QEMUSnapshotInfo *sn_info) |
| { |
| BlockDriver *drv = bs->drv; |
| if (!drv) |
| return -ENOMEDIUM; |
| if (drv->bdrv_snapshot_create) |
| return drv->bdrv_snapshot_create(bs, sn_info); |
| if (bs->file) |
| return bdrv_snapshot_create(bs->file, sn_info); |
| return -ENOTSUP; |
| } |
| |
| int bdrv_snapshot_goto(BlockDriverState *bs, |
| const char *snapshot_id) |
| { |
| BlockDriver *drv = bs->drv; |
| int ret, open_ret; |
| |
| if (!drv) |
| return -ENOMEDIUM; |
| if (drv->bdrv_snapshot_goto) |
| return drv->bdrv_snapshot_goto(bs, snapshot_id); |
| |
| if (bs->file) { |
| drv->bdrv_close(bs); |
| ret = bdrv_snapshot_goto(bs->file, snapshot_id); |
| open_ret = drv->bdrv_open(bs, bs->open_flags); |
| if (open_ret < 0) { |
| bdrv_delete(bs->file); |
| bs->drv = NULL; |
| return open_ret; |
| } |
| return ret; |
| } |
| |
| return -ENOTSUP; |
| } |
| |
| int bdrv_snapshot_delete(BlockDriverState *bs, const char *snapshot_id) |
| { |
| BlockDriver *drv = bs->drv; |
| if (!drv) |
| return -ENOMEDIUM; |
| if (drv->bdrv_snapshot_delete) |
| return drv->bdrv_snapshot_delete(bs, snapshot_id); |
| if (bs->file) |
| return bdrv_snapshot_delete(bs->file, snapshot_id); |
| return -ENOTSUP; |
| } |
| |
| int bdrv_snapshot_list(BlockDriverState *bs, |
| QEMUSnapshotInfo **psn_info) |
| { |
| BlockDriver *drv = bs->drv; |
| if (!drv) |
| return -ENOMEDIUM; |
| if (drv->bdrv_snapshot_list) |
| return drv->bdrv_snapshot_list(bs, psn_info); |
| if (bs->file) |
| return bdrv_snapshot_list(bs->file, psn_info); |
| return -ENOTSUP; |
| } |
| |
| #define NB_SUFFIXES 4 |
| |
| char *get_human_readable_size(char *buf, int buf_size, int64_t size) |
| { |
| static const char suffixes[NB_SUFFIXES] = "KMGT"; |
| int64_t base; |
| int i; |
| |
| if (size <= 999) { |
| snprintf(buf, buf_size, "%" PRId64, size); |
| } else { |
| base = 1024; |
| for(i = 0; i < NB_SUFFIXES; i++) { |
| if (size < (10 * base)) { |
| snprintf(buf, buf_size, "%0.1f%c", |
| (double)size / base, |
| suffixes[i]); |
| break; |
| } else if (size < (1000 * base) || i == (NB_SUFFIXES - 1)) { |
| snprintf(buf, buf_size, "%" PRId64 "%c", |
| ((size + (base >> 1)) / base), |
| suffixes[i]); |
| break; |
| } |
| base = base * 1024; |
| } |
| } |
| return buf; |
| } |
| |
| char *bdrv_snapshot_dump(char *buf, int buf_size, QEMUSnapshotInfo *sn) |
| { |
| char buf1[128], date_buf[128], clock_buf[128]; |
| #ifdef _WIN32 |
| struct tm *ptm; |
| #else |
| struct tm tm; |
| #endif |
| time_t ti; |
| int64_t secs; |
| |
| if (!sn) { |
| snprintf(buf, buf_size, |
| "%-10s%-20s%7s%20s%15s", |
| "ID", "TAG", "VM SIZE", "DATE", "VM CLOCK"); |
| } else { |
| ti = sn->date_sec; |
| #ifdef _WIN32 |
| ptm = localtime(&ti); |
| strftime(date_buf, sizeof(date_buf), |
| "%Y-%m-%d %H:%M:%S", ptm); |
| #else |
| localtime_r(&ti, &tm); |
| strftime(date_buf, sizeof(date_buf), |
| "%Y-%m-%d %H:%M:%S", &tm); |
| #endif |
| secs = sn->vm_clock_nsec / 1000000000; |
| snprintf(clock_buf, sizeof(clock_buf), |
| "%02d:%02d:%02d.%03d", |
| (int)(secs / 3600), |
| (int)((secs / 60) % 60), |
| (int)(secs % 60), |
| (int)((sn->vm_clock_nsec / 1000000) % 1000)); |
| snprintf(buf, buf_size, |
| "%-10s%-20s%7s%20s%15s", |
| sn->id_str, sn->name, |
| get_human_readable_size(buf1, sizeof(buf1), sn->vm_state_size), |
| date_buf, |
| clock_buf); |
| } |
| return buf; |
| } |
| |
| |
| /**************************************************************/ |
| /* async I/Os */ |
| |
| BlockDriverAIOCB *bdrv_aio_readv(BlockDriverState *bs, int64_t sector_num, |
| QEMUIOVector *qiov, int nb_sectors, |
| BlockDriverCompletionFunc *cb, void *opaque) |
| { |
| BlockDriver *drv = bs->drv; |
| BlockDriverAIOCB *ret; |
| |
| if (!drv) |
| return NULL; |
| if (bdrv_check_request(bs, sector_num, nb_sectors)) |
| return NULL; |
| |
| ret = drv->bdrv_aio_readv(bs, sector_num, qiov, nb_sectors, |
| cb, opaque); |
| |
| if (ret) { |
| /* Update stats even though technically transfer has not happened. */ |
| bs->rd_bytes += (unsigned) nb_sectors * BDRV_SECTOR_SIZE; |
| bs->rd_ops ++; |
| } |
| |
| return ret; |
| } |
| |
| BlockDriverAIOCB *bdrv_aio_writev(BlockDriverState *bs, int64_t sector_num, |
| QEMUIOVector *qiov, int nb_sectors, |
| BlockDriverCompletionFunc *cb, void *opaque) |
| { |
| BlockDriver *drv = bs->drv; |
| BlockDriverAIOCB *ret; |
| |
| if (!drv) |
| return NULL; |
| if (bs->read_only) |
| return NULL; |
| if (bdrv_check_request(bs, sector_num, nb_sectors)) |
| return NULL; |
| |
| if (bs->dirty_bitmap) { |
| set_dirty_bitmap(bs, sector_num, nb_sectors, 1); |
| } |
| |
| ret = drv->bdrv_aio_writev(bs, sector_num, qiov, nb_sectors, |
| cb, opaque); |
| |
| if (ret) { |
| /* Update stats even though technically transfer has not happened. */ |
| bs->wr_bytes += (unsigned) nb_sectors * BDRV_SECTOR_SIZE; |
| bs->wr_ops ++; |
| if (bs->wr_highest_sector < sector_num + nb_sectors - 1) { |
| bs->wr_highest_sector = sector_num + nb_sectors - 1; |
| } |
| } |
| |
| return ret; |
| } |
| |
| |
| typedef struct MultiwriteCB { |
| int error; |
| int num_requests; |
| int num_callbacks; |
| struct { |
| BlockDriverCompletionFunc *cb; |
| void *opaque; |
| QEMUIOVector *free_qiov; |
| void *free_buf; |
| } callbacks[]; |
| } MultiwriteCB; |
| |
| static void multiwrite_user_cb(MultiwriteCB *mcb) |
| { |
| int i; |
| |
| for (i = 0; i < mcb->num_callbacks; i++) { |
| mcb->callbacks[i].cb(mcb->callbacks[i].opaque, mcb->error); |
| if (mcb->callbacks[i].free_qiov) { |
| qemu_iovec_destroy(mcb->callbacks[i].free_qiov); |
| } |
| g_free(mcb->callbacks[i].free_qiov); |
| qemu_vfree(mcb->callbacks[i].free_buf); |
| } |
| } |
| |
| static void multiwrite_cb(void *opaque, int ret) |
| { |
| MultiwriteCB *mcb = opaque; |
| |
| if (ret < 0 && !mcb->error) { |
| mcb->error = ret; |
| } |
| |
| mcb->num_requests--; |
| if (mcb->num_requests == 0) { |
| multiwrite_user_cb(mcb); |
| g_free(mcb); |
| } |
| } |
| |
| static int multiwrite_req_compare(const void *a, const void *b) |
| { |
| const BlockRequest *req1 = a, *req2 = b; |
| |
| /* |
| * Note that we can't simply subtract req2->sector from req1->sector |
| * here as that could overflow the return value. |
| */ |
| if (req1->sector > req2->sector) { |
| return 1; |
| } else if (req1->sector < req2->sector) { |
| return -1; |
| } else { |
| return 0; |
| } |
| } |
| |
| /* |
| * Takes a bunch of requests and tries to merge them. Returns the number of |
| * requests that remain after merging. |
| */ |
| static int multiwrite_merge(BlockDriverState *bs, BlockRequest *reqs, |
| int num_reqs, MultiwriteCB *mcb) |
| { |
| int i, outidx; |
| |
| // Sort requests by start sector |
| qsort(reqs, num_reqs, sizeof(*reqs), &multiwrite_req_compare); |
| |
| // Check if adjacent requests touch the same clusters. If so, combine them, |
| // filling up gaps with zero sectors. |
| outidx = 0; |
| for (i = 1; i < num_reqs; i++) { |
| int merge = 0; |
| int64_t oldreq_last = reqs[outidx].sector + reqs[outidx].nb_sectors; |
| |
| // This handles the cases that are valid for all block drivers, namely |
| // exactly sequential writes and overlapping writes. |
| if (reqs[i].sector <= oldreq_last) { |
| merge = 1; |
| } |
| |
| // The block driver may decide that it makes sense to combine requests |
| // even if there is a gap of some sectors between them. In this case, |
| // the gap is filled with zeros (therefore only applicable for yet |
| // unused space in format like qcow2). |
| if (!merge && bs->drv->bdrv_merge_requests) { |
| merge = bs->drv->bdrv_merge_requests(bs, &reqs[outidx], &reqs[i]); |
| } |
| |
| if (reqs[outidx].qiov->niov + reqs[i].qiov->niov + 1 > IOV_MAX) { |
| merge = 0; |
| } |
| |
| if (merge) { |
| size_t size; |
| QEMUIOVector *qiov = g_malloc0(sizeof(*qiov)); |
| qemu_iovec_init(qiov, |
| reqs[outidx].qiov->niov + reqs[i].qiov->niov + 1); |
| |
| // Add the first request to the merged one. If the requests are |
| // overlapping, drop the last sectors of the first request. |
| size = (reqs[i].sector - reqs[outidx].sector) << 9; |
| qemu_iovec_concat(qiov, reqs[outidx].qiov, 0, size); |
| |
| // We might need to add some zeros between the two requests |
| if (reqs[i].sector > oldreq_last) { |
| size_t zero_bytes = (reqs[i].sector - oldreq_last) << 9; |
| uint8_t *buf = qemu_blockalign(bs, zero_bytes); |
| memset(buf, 0, zero_bytes); |
| qemu_iovec_add(qiov, buf, zero_bytes); |
| mcb->callbacks[i].free_buf = buf; |
| } |
| |
| // Add the second request |
| qemu_iovec_concat(qiov, reqs[i].qiov, 0, reqs[i].qiov->size); |
| |
| reqs[outidx].nb_sectors = qiov->size >> 9; |
| reqs[outidx].qiov = qiov; |
| |
| mcb->callbacks[i].free_qiov = reqs[outidx].qiov; |
| } else { |
| outidx++; |
| reqs[outidx].sector = reqs[i].sector; |
| reqs[outidx].nb_sectors = reqs[i].nb_sectors; |
| reqs[outidx].qiov = reqs[i].qiov; |
| } |
| } |
| |
| return outidx + 1; |
| } |
| |
| /* |
| * Submit multiple AIO write requests at once. |
| * |
| * On success, the function returns 0 and all requests in the reqs array have |
| * been submitted. In error case this function returns -1, and any of the |
| * requests may or may not be submitted yet. In particular, this means that the |
| * callback will be called for some of the requests, for others it won't. The |
| * caller must check the error field of the BlockRequest to wait for the right |
| * callbacks (if error != 0, no callback will be called). |
| * |
| * The implementation may modify the contents of the reqs array, e.g. to merge |
| * requests. However, the fields opaque and error are left unmodified as they |
| * are used to signal failure for a single request to the caller. |
| */ |
| int bdrv_aio_multiwrite(BlockDriverState *bs, BlockRequest *reqs, int num_reqs) |
| { |
| BlockDriverAIOCB *acb; |
| MultiwriteCB *mcb; |
| int i; |
| |
| if (num_reqs == 0) { |
| return 0; |
| } |
| |
| // Create MultiwriteCB structure |
| mcb = g_malloc0(sizeof(*mcb) + num_reqs * sizeof(*mcb->callbacks)); |
| mcb->num_requests = 0; |
| mcb->num_callbacks = num_reqs; |
| |
| for (i = 0; i < num_reqs; i++) { |
| mcb->callbacks[i].cb = reqs[i].cb; |
| mcb->callbacks[i].opaque = reqs[i].opaque; |
| } |
| |
| // Check for mergable requests |
| num_reqs = multiwrite_merge(bs, reqs, num_reqs, mcb); |
| |
| /* |
| * Run the aio requests. As soon as one request can't be submitted |
| * successfully, fail all requests that are not yet submitted (we must |
| * return failure for all requests anyway) |
| * |
| * num_requests cannot be set to the right value immediately: If |
| * bdrv_aio_writev fails for some request, num_requests would be too high |
| * and therefore multiwrite_cb() would never recognize the multiwrite |
| * request as completed. We also cannot use the loop variable i to set it |
| * when the first request fails because the callback may already have been |
| * called for previously submitted requests. Thus, num_requests must be |
| * incremented for each request that is submitted. |
| * |
| * The problem that callbacks may be called early also means that we need |
| * to take care that num_requests doesn't become 0 before all requests are |
| * submitted - multiwrite_cb() would consider the multiwrite request |
| * completed. A dummy request that is "completed" by a manual call to |
| * multiwrite_cb() takes care of this. |
| */ |
| mcb->num_requests = 1; |
| |
| for (i = 0; i < num_reqs; i++) { |
| mcb->num_requests++; |
| acb = bdrv_aio_writev(bs, reqs[i].sector, reqs[i].qiov, |
| reqs[i].nb_sectors, multiwrite_cb, mcb); |
| |
| if (acb == NULL) { |
| // We can only fail the whole thing if no request has been |
| // submitted yet. Otherwise we'll wait for the submitted AIOs to |
| // complete and report the error in the callback. |
| if (i == 0) { |
| goto fail; |
| } else { |
| multiwrite_cb(mcb, -EIO); |
| break; |
| } |
| } |
| } |
| |
| /* Complete the dummy request */ |
| multiwrite_cb(mcb, 0); |
| |
| return 0; |
| |
| fail: |
| for (i = 0; i < mcb->num_callbacks; i++) { |
| reqs[i].error = -EIO; |
| } |
| g_free(mcb); |
| return -1; |
| } |
| |
| BlockDriverAIOCB *bdrv_aio_flush(BlockDriverState *bs, |
| BlockDriverCompletionFunc *cb, void *opaque) |
| { |
| BlockDriver *drv = bs->drv; |
| |
| if (bs->open_flags & BDRV_O_NO_FLUSH) { |
| return bdrv_aio_noop_em(bs, cb, opaque); |
| } |
| |
| if (!drv) |
| return NULL; |
| return drv->bdrv_aio_flush(bs, cb, opaque); |
| } |
| |
| void bdrv_aio_cancel(BlockDriverAIOCB *acb) |
| { |
| acb->pool->cancel(acb); |
| } |
| |
| |
| /**************************************************************/ |
| /* async block device emulation */ |
| |
| typedef struct BlockDriverAIOCBSync { |
| BlockDriverAIOCB common; |
| QEMUBH *bh; |
| int ret; |
| /* vector translation state */ |
| QEMUIOVector *qiov; |
| uint8_t *bounce; |
| int is_write; |
| } BlockDriverAIOCBSync; |
| |
| static void bdrv_aio_cancel_em(BlockDriverAIOCB *blockacb) |
| { |
| BlockDriverAIOCBSync *acb = |
| container_of(blockacb, BlockDriverAIOCBSync, common); |
| qemu_bh_delete(acb->bh); |
| acb->bh = NULL; |
| qemu_aio_release(acb); |
| } |
| |
| static AIOPool bdrv_em_aio_pool = { |
| .aiocb_size = sizeof(BlockDriverAIOCBSync), |
| .cancel = bdrv_aio_cancel_em, |
| }; |
| |
| static void bdrv_aio_bh_cb(void *opaque) |
| { |
| BlockDriverAIOCBSync *acb = opaque; |
| |
| if (!acb->is_write) |
| qemu_iovec_from_buf(acb->qiov, 0, acb->bounce, acb->qiov->size); |
| qemu_vfree(acb->bounce); |
| acb->common.cb(acb->common.opaque, acb->ret); |
| qemu_bh_delete(acb->bh); |
| acb->bh = NULL; |
| qemu_aio_release(acb); |
| } |
| |
| static BlockDriverAIOCB *bdrv_aio_rw_vector(BlockDriverState *bs, |
| int64_t sector_num, |
| QEMUIOVector *qiov, |
| int nb_sectors, |
| BlockDriverCompletionFunc *cb, |
| void *opaque, |
| int is_write) |
| |
| { |
| BlockDriverAIOCBSync *acb; |
| |
| acb = qemu_aio_get(&bdrv_em_aio_pool, bs, cb, opaque); |
| acb->is_write = is_write; |
| acb->qiov = qiov; |
| acb->bounce = qemu_blockalign(bs, qiov->size); |
| |
| if (!acb->bh) |
| acb->bh = qemu_bh_new(bdrv_aio_bh_cb, acb); |
| |
| if (is_write) { |
| qemu_iovec_to_buf(acb->qiov, 0, acb->bounce, qiov->size); |
| acb->ret = bdrv_write(bs, sector_num, acb->bounce, nb_sectors); |
| } else { |
| acb->ret = bdrv_read(bs, sector_num, acb->bounce, nb_sectors); |
| } |
| |
| qemu_bh_schedule(acb->bh); |
| |
| return &acb->common; |
| } |
| |
| static BlockDriverAIOCB *bdrv_aio_readv_em(BlockDriverState *bs, |
| int64_t sector_num, QEMUIOVector *qiov, int nb_sectors, |
| BlockDriverCompletionFunc *cb, void *opaque) |
| { |
| return bdrv_aio_rw_vector(bs, sector_num, qiov, nb_sectors, cb, opaque, 0); |
| } |
| |
| static BlockDriverAIOCB *bdrv_aio_writev_em(BlockDriverState *bs, |
| int64_t sector_num, QEMUIOVector *qiov, int nb_sectors, |
| BlockDriverCompletionFunc *cb, void *opaque) |
| { |
| return bdrv_aio_rw_vector(bs, sector_num, qiov, nb_sectors, cb, opaque, 1); |
| } |
| |
| static BlockDriverAIOCB *bdrv_aio_flush_em(BlockDriverState *bs, |
| BlockDriverCompletionFunc *cb, void *opaque) |
| { |
| BlockDriverAIOCBSync *acb; |
| |
| acb = qemu_aio_get(&bdrv_em_aio_pool, bs, cb, opaque); |
| acb->is_write = 1; /* don't bounce in the completion hadler */ |
| acb->qiov = NULL; |
| acb->bounce = NULL; |
| acb->ret = 0; |
| |
| if (!acb->bh) |
| acb->bh = qemu_bh_new(bdrv_aio_bh_cb, acb); |
| |
| bdrv_flush(bs); |
| qemu_bh_schedule(acb->bh); |
| return &acb->common; |
| } |
| |
| static BlockDriverAIOCB *bdrv_aio_noop_em(BlockDriverState *bs, |
| BlockDriverCompletionFunc *cb, void *opaque) |
| { |
| BlockDriverAIOCBSync *acb; |
| |
| acb = qemu_aio_get(&bdrv_em_aio_pool, bs, cb, opaque); |
| acb->is_write = 1; /* don't bounce in the completion handler */ |
| acb->qiov = NULL; |
| acb->bounce = NULL; |
| acb->ret = 0; |
| |
| if (!acb->bh) { |
| acb->bh = qemu_bh_new(bdrv_aio_bh_cb, acb); |
| } |
| |
| qemu_bh_schedule(acb->bh); |
| return &acb->common; |
| } |
| |
| /**************************************************************/ |
| /* sync block device emulation */ |
| |
| static void bdrv_rw_em_cb(void *opaque, int ret) |
| { |
| *(int *)opaque = ret; |
| } |
| |
| #define NOT_DONE 0x7fffffff |
| |
| static int bdrv_read_em(BlockDriverState *bs, int64_t sector_num, |
| uint8_t *buf, int nb_sectors) |
| { |
| int async_ret; |
| BlockDriverAIOCB *acb; |
| struct iovec iov; |
| QEMUIOVector qiov; |
| |
| async_context_push(); |
| |
| async_ret = NOT_DONE; |
| iov.iov_base = (void *)buf; |
| iov.iov_len = nb_sectors * BDRV_SECTOR_SIZE; |
| qemu_iovec_init_external(&qiov, &iov, 1); |
| acb = bdrv_aio_readv(bs, sector_num, &qiov, nb_sectors, |
| bdrv_rw_em_cb, &async_ret); |
| if (acb == NULL) { |
| async_ret = -1; |
| goto fail; |
| } |
| |
| while (async_ret == NOT_DONE) { |
| qemu_aio_wait(); |
| } |
| |
| |
| fail: |
| async_context_pop(); |
| return async_ret; |
| } |
| |
| static int bdrv_write_em(BlockDriverState *bs, int64_t sector_num, |
| const uint8_t *buf, int nb_sectors) |
| { |
| int async_ret; |
| BlockDriverAIOCB *acb; |
| struct iovec iov; |
| QEMUIOVector qiov; |
| |
| async_context_push(); |
| |
| async_ret = NOT_DONE; |
| iov.iov_base = (void *)buf; |
| iov.iov_len = nb_sectors * BDRV_SECTOR_SIZE; |
| qemu_iovec_init_external(&qiov, &iov, 1); |
| acb = bdrv_aio_writev(bs, sector_num, &qiov, nb_sectors, |
| bdrv_rw_em_cb, &async_ret); |
| if (acb == NULL) { |
| async_ret = -1; |
| goto fail; |
| } |
| while (async_ret == NOT_DONE) { |
| qemu_aio_wait(); |
| } |
| |
| fail: |
| async_context_pop(); |
| return async_ret; |
| } |
| |
| void bdrv_init(void) |
| { |
| module_call_init(MODULE_INIT_BLOCK); |
| } |
| |
| void bdrv_init_with_whitelist(void) |
| { |
| use_bdrv_whitelist = 1; |
| bdrv_init(); |
| } |
| |
| void *qemu_aio_get(AIOPool *pool, BlockDriverState *bs, |
| BlockDriverCompletionFunc *cb, void *opaque) |
| { |
| BlockDriverAIOCB *acb; |
| |
| if (pool->free_aiocb) { |
| acb = pool->free_aiocb; |
| pool->free_aiocb = acb->next; |
| } else { |
| acb = g_malloc0(pool->aiocb_size); |
| acb->pool = pool; |
| } |
| acb->bs = bs; |
| acb->cb = cb; |
| acb->opaque = opaque; |
| return acb; |
| } |
| |
| void qemu_aio_release(void *p) |
| { |
| BlockDriverAIOCB *acb = (BlockDriverAIOCB *)p; |
| AIOPool *pool = acb->pool; |
| acb->next = pool->free_aiocb; |
| pool->free_aiocb = acb; |
| } |
| |
| /**************************************************************/ |
| /* removable device support */ |
| |
| /** |
| * Return TRUE if the media is present |
| */ |
| int bdrv_is_inserted(BlockDriverState *bs) |
| { |
| BlockDriver *drv = bs->drv; |
| int ret; |
| if (!drv) |
| return 0; |
| if (!drv->bdrv_is_inserted) |
| return !bs->tray_open; |
| ret = drv->bdrv_is_inserted(bs); |
| return ret; |
| } |
| |
| /** |
| * Return TRUE if the media changed since the last call to this |
| * function. It is currently only used for floppy disks |
| */ |
| int bdrv_media_changed(BlockDriverState *bs) |
| { |
| BlockDriver *drv = bs->drv; |
| int ret; |
| |
| if (!drv || !drv->bdrv_media_changed) |
| ret = -ENOTSUP; |
| else |
| ret = drv->bdrv_media_changed(bs); |
| if (ret == -ENOTSUP) |
| ret = bs->media_changed; |
| bs->media_changed = 0; |
| return ret; |
| } |
| |
| /** |
| * If eject_flag is TRUE, eject the media. Otherwise, close the tray |
| */ |
| int bdrv_eject(BlockDriverState *bs, int eject_flag) |
| { |
| BlockDriver *drv = bs->drv; |
| int ret; |
| |
| if (bs->locked) { |
| return -EBUSY; |
| } |
| |
| if (!drv || !drv->bdrv_eject) { |
| ret = -ENOTSUP; |
| } else { |
| ret = drv->bdrv_eject(bs, eject_flag); |
| } |
| if (ret == -ENOTSUP) { |
| ret = 0; |
| } |
| if (ret >= 0) { |
| bs->tray_open = eject_flag; |
| } |
| |
| return ret; |
| } |
| |
| int bdrv_is_locked(BlockDriverState *bs) |
| { |
| return bs->locked; |
| } |
| |
| /** |
| * Lock or unlock the media (if it is locked, the user won't be able |
| * to eject it manually). |
| */ |
| void bdrv_set_locked(BlockDriverState *bs, int locked) |
| { |
| BlockDriver *drv = bs->drv; |
| |
| bs->locked = locked; |
| if (drv && drv->bdrv_set_locked) { |
| drv->bdrv_set_locked(bs, locked); |
| } |
| } |
| |
| /* needed for generic scsi interface */ |
| |
| int bdrv_ioctl(BlockDriverState *bs, unsigned long int req, void *buf) |
| { |
| BlockDriver *drv = bs->drv; |
| |
| if (drv && drv->bdrv_ioctl) |
| return drv->bdrv_ioctl(bs, req, buf); |
| return -ENOTSUP; |
| } |
| |
| BlockDriverAIOCB *bdrv_aio_ioctl(BlockDriverState *bs, |
| unsigned long int req, void *buf, |
| BlockDriverCompletionFunc *cb, void *opaque) |
| { |
| BlockDriver *drv = bs->drv; |
| |
| if (drv && drv->bdrv_aio_ioctl) |
| return drv->bdrv_aio_ioctl(bs, req, buf, cb, opaque); |
| return NULL; |
| } |
| |
| |
| |
| void *qemu_blockalign(BlockDriverState *bs, size_t size) |
| { |
| return qemu_memalign((bs && bs->buffer_alignment) ? bs->buffer_alignment : 512, size); |
| } |
| |
| void bdrv_set_dirty_tracking(BlockDriverState *bs, int enable) |
| { |
| int64_t bitmap_size; |
| |
| bs->dirty_count = 0; |
| if (enable) { |
| if (!bs->dirty_bitmap) { |
| bitmap_size = (bdrv_getlength(bs) >> BDRV_SECTOR_BITS) + |
| BDRV_SECTORS_PER_DIRTY_CHUNK * 8 - 1; |
| bitmap_size /= BDRV_SECTORS_PER_DIRTY_CHUNK * 8; |
| |
| bs->dirty_bitmap = g_malloc0(bitmap_size); |
| } |
| } else { |
| if (bs->dirty_bitmap) { |
| g_free(bs->dirty_bitmap); |
| bs->dirty_bitmap = NULL; |
| } |
| } |
| } |
| |
| int bdrv_get_dirty(BlockDriverState *bs, int64_t sector) |
| { |
| int64_t chunk = sector / (int64_t)BDRV_SECTORS_PER_DIRTY_CHUNK; |
| |
| if (bs->dirty_bitmap && |
| (sector << BDRV_SECTOR_BITS) < bdrv_getlength(bs)) { |
| return bs->dirty_bitmap[chunk / (sizeof(unsigned long) * 8)] & |
| (1 << (chunk % (sizeof(unsigned long) * 8))); |
| } else { |
| return 0; |
| } |
| } |
| |
| void bdrv_reset_dirty(BlockDriverState *bs, int64_t cur_sector, |
| int nr_sectors) |
| { |
| set_dirty_bitmap(bs, cur_sector, nr_sectors, 0); |
| } |
| |
| int64_t bdrv_get_dirty_count(BlockDriverState *bs) |
| { |
| return bs->dirty_count; |
| } |