| /* |
| * QEMU Bluetooth HCI logic. |
| * |
| * Copyright (C) 2007 OpenMoko, Inc. |
| * Copyright (C) 2008 Andrzej Zaborowski <balrog@zabor.org> |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, see <http://www.gnu.org/licenses/>. |
| */ |
| |
| #include "qemu-common.h" |
| #include "qemu/timer.h" |
| #include "hw/usb.h" |
| #include "net/net.h" |
| #include "hw/bt.h" |
| |
| struct bt_hci_s { |
| uint8_t *(*evt_packet)(void *opaque); |
| void (*evt_submit)(void *opaque, int len); |
| void *opaque; |
| uint8_t evt_buf[256]; |
| |
| uint8_t acl_buf[4096]; |
| int acl_len; |
| |
| uint16_t asb_handle; |
| uint16_t psb_handle; |
| |
| int last_cmd; /* Note: Always little-endian */ |
| |
| struct bt_device_s *conn_req_host; |
| |
| struct { |
| int inquire; |
| int periodic; |
| int responses_left; |
| int responses; |
| QEMUTimer *inquiry_done; |
| QEMUTimer *inquiry_next; |
| int inquiry_length; |
| int inquiry_period; |
| int inquiry_mode; |
| |
| #define HCI_HANDLE_OFFSET 0x20 |
| #define HCI_HANDLES_MAX 0x10 |
| struct bt_hci_master_link_s { |
| struct bt_link_s *link; |
| void (*lmp_acl_data)(struct bt_link_s *link, |
| const uint8_t *data, int start, int len); |
| QEMUTimer *acl_mode_timer; |
| } handle[HCI_HANDLES_MAX]; |
| uint32_t role_bmp; |
| int last_handle; |
| int connecting; |
| bdaddr_t awaiting_bdaddr[HCI_HANDLES_MAX]; |
| } lm; |
| |
| uint8_t event_mask[8]; |
| uint16_t voice_setting; /* Notw: Always little-endian */ |
| uint16_t conn_accept_tout; |
| QEMUTimer *conn_accept_timer; |
| |
| struct HCIInfo info; |
| struct bt_device_s device; |
| }; |
| |
| #define DEFAULT_RSSI_DBM 20 |
| |
| #define hci_from_info(ptr) container_of((ptr), struct bt_hci_s, info) |
| #define hci_from_device(ptr) container_of((ptr), struct bt_hci_s, device) |
| |
| struct bt_hci_link_s { |
| struct bt_link_s btlink; |
| uint16_t handle; /* Local */ |
| }; |
| |
| /* LMP layer emulation */ |
| #if 0 |
| static void bt_submit_lmp(struct bt_device_s *bt, int length, uint8_t *data) |
| { |
| int resp, resplen, error, op, tr; |
| uint8_t respdata[17]; |
| |
| if (length < 1) |
| return; |
| |
| tr = *data & 1; |
| op = *(data ++) >> 1; |
| resp = LMP_ACCEPTED; |
| resplen = 2; |
| respdata[1] = op; |
| error = 0; |
| length --; |
| |
| if (op >= 0x7c) { /* Extended opcode */ |
| op |= *(data ++) << 8; |
| resp = LMP_ACCEPTED_EXT; |
| resplen = 4; |
| respdata[0] = op >> 8; |
| respdata[1] = op & 0xff; |
| length --; |
| } |
| |
| switch (op) { |
| case LMP_ACCEPTED: |
| /* data[0] Op code |
| */ |
| if (length < 1) { |
| error = HCI_UNSUPPORTED_LMP_PARAMETER_VALUE; |
| goto not_accepted; |
| } |
| resp = 0; |
| break; |
| |
| case LMP_ACCEPTED_EXT: |
| /* data[0] Escape op code |
| * data[1] Extended op code |
| */ |
| if (length < 2) { |
| error = HCI_UNSUPPORTED_LMP_PARAMETER_VALUE; |
| goto not_accepted; |
| } |
| resp = 0; |
| break; |
| |
| case LMP_NOT_ACCEPTED: |
| /* data[0] Op code |
| * data[1] Error code |
| */ |
| if (length < 2) { |
| error = HCI_UNSUPPORTED_LMP_PARAMETER_VALUE; |
| goto not_accepted; |
| } |
| resp = 0; |
| break; |
| |
| case LMP_NOT_ACCEPTED_EXT: |
| /* data[0] Op code |
| * data[1] Extended op code |
| * data[2] Error code |
| */ |
| if (length < 3) { |
| error = HCI_UNSUPPORTED_LMP_PARAMETER_VALUE; |
| goto not_accepted; |
| } |
| resp = 0; |
| break; |
| |
| case LMP_HOST_CONNECTION_REQ: |
| break; |
| |
| case LMP_SETUP_COMPLETE: |
| resp = LMP_SETUP_COMPLETE; |
| resplen = 1; |
| bt->setup = 1; |
| break; |
| |
| case LMP_DETACH: |
| /* data[0] Error code |
| */ |
| if (length < 1) { |
| error = HCI_UNSUPPORTED_LMP_PARAMETER_VALUE; |
| goto not_accepted; |
| } |
| bt->setup = 0; |
| resp = 0; |
| break; |
| |
| case LMP_SUPERVISION_TIMEOUT: |
| /* data[0,1] Supervision timeout |
| */ |
| if (length < 2) { |
| error = HCI_UNSUPPORTED_LMP_PARAMETER_VALUE; |
| goto not_accepted; |
| } |
| resp = 0; |
| break; |
| |
| case LMP_QUALITY_OF_SERVICE: |
| resp = 0; |
| /* Fall through */ |
| case LMP_QOS_REQ: |
| /* data[0,1] Poll interval |
| * data[2] N(BC) |
| */ |
| if (length < 3) { |
| error = HCI_UNSUPPORTED_LMP_PARAMETER_VALUE; |
| goto not_accepted; |
| } |
| break; |
| |
| case LMP_MAX_SLOT: |
| resp = 0; |
| /* Fall through */ |
| case LMP_MAX_SLOT_REQ: |
| /* data[0] Max slots |
| */ |
| if (length < 1) { |
| error = HCI_UNSUPPORTED_LMP_PARAMETER_VALUE; |
| goto not_accepted; |
| } |
| break; |
| |
| case LMP_AU_RAND: |
| case LMP_IN_RAND: |
| case LMP_COMB_KEY: |
| /* data[0-15] Random number |
| */ |
| if (length < 16) { |
| error = HCI_UNSUPPORTED_LMP_PARAMETER_VALUE; |
| goto not_accepted; |
| } |
| if (op == LMP_AU_RAND) { |
| if (bt->key_present) { |
| resp = LMP_SRES; |
| resplen = 5; |
| /* XXX: [Part H] Section 6.1 on page 801 */ |
| } else { |
| error = HCI_PIN_OR_KEY_MISSING; |
| goto not_accepted; |
| } |
| } else if (op == LMP_IN_RAND) { |
| error = HCI_PAIRING_NOT_ALLOWED; |
| goto not_accepted; |
| } else { |
| /* XXX: [Part H] Section 3.2 on page 779 */ |
| resp = LMP_UNIT_KEY; |
| resplen = 17; |
| memcpy(respdata + 1, bt->key, 16); |
| |
| error = HCI_UNIT_LINK_KEY_USED; |
| goto not_accepted; |
| } |
| break; |
| |
| case LMP_UNIT_KEY: |
| /* data[0-15] Key |
| */ |
| if (length < 16) { |
| error = HCI_UNSUPPORTED_LMP_PARAMETER_VALUE; |
| goto not_accepted; |
| } |
| memcpy(bt->key, data, 16); |
| bt->key_present = 1; |
| break; |
| |
| case LMP_SRES: |
| /* data[0-3] Authentication response |
| */ |
| if (length < 4) { |
| error = HCI_UNSUPPORTED_LMP_PARAMETER_VALUE; |
| goto not_accepted; |
| } |
| break; |
| |
| case LMP_CLKOFFSET_REQ: |
| resp = LMP_CLKOFFSET_RES; |
| resplen = 3; |
| respdata[1] = 0x33; |
| respdata[2] = 0x33; |
| break; |
| |
| case LMP_CLKOFFSET_RES: |
| /* data[0,1] Clock offset |
| * (Slave to master only) |
| */ |
| if (length < 2) { |
| error = HCI_UNSUPPORTED_LMP_PARAMETER_VALUE; |
| goto not_accepted; |
| } |
| break; |
| |
| case LMP_VERSION_REQ: |
| case LMP_VERSION_RES: |
| /* data[0] VersNr |
| * data[1,2] CompId |
| * data[3,4] SubVersNr |
| */ |
| if (length < 5) { |
| error = HCI_UNSUPPORTED_LMP_PARAMETER_VALUE; |
| goto not_accepted; |
| } |
| if (op == LMP_VERSION_REQ) { |
| resp = LMP_VERSION_RES; |
| resplen = 6; |
| respdata[1] = 0x20; |
| respdata[2] = 0xff; |
| respdata[3] = 0xff; |
| respdata[4] = 0xff; |
| respdata[5] = 0xff; |
| } else |
| resp = 0; |
| break; |
| |
| case LMP_FEATURES_REQ: |
| case LMP_FEATURES_RES: |
| /* data[0-7] Features |
| */ |
| if (length < 8) { |
| error = HCI_UNSUPPORTED_LMP_PARAMETER_VALUE; |
| goto not_accepted; |
| } |
| if (op == LMP_FEATURES_REQ) { |
| resp = LMP_FEATURES_RES; |
| resplen = 9; |
| respdata[1] = (bt->lmp_caps >> 0) & 0xff; |
| respdata[2] = (bt->lmp_caps >> 8) & 0xff; |
| respdata[3] = (bt->lmp_caps >> 16) & 0xff; |
| respdata[4] = (bt->lmp_caps >> 24) & 0xff; |
| respdata[5] = (bt->lmp_caps >> 32) & 0xff; |
| respdata[6] = (bt->lmp_caps >> 40) & 0xff; |
| respdata[7] = (bt->lmp_caps >> 48) & 0xff; |
| respdata[8] = (bt->lmp_caps >> 56) & 0xff; |
| } else |
| resp = 0; |
| break; |
| |
| case LMP_NAME_REQ: |
| /* data[0] Name offset |
| */ |
| if (length < 1) { |
| error = HCI_UNSUPPORTED_LMP_PARAMETER_VALUE; |
| goto not_accepted; |
| } |
| resp = LMP_NAME_RES; |
| resplen = 17; |
| respdata[1] = data[0]; |
| respdata[2] = strlen(bt->lmp_name); |
| memset(respdata + 3, 0x00, 14); |
| if (respdata[2] > respdata[1]) |
| memcpy(respdata + 3, bt->lmp_name + respdata[1], |
| respdata[2] - respdata[1]); |
| break; |
| |
| case LMP_NAME_RES: |
| /* data[0] Name offset |
| * data[1] Name length |
| * data[2-15] Name fragment |
| */ |
| if (length < 16) { |
| error = HCI_UNSUPPORTED_LMP_PARAMETER_VALUE; |
| goto not_accepted; |
| } |
| resp = 0; |
| break; |
| |
| default: |
| error = HCI_UNKNOWN_LMP_PDU; |
| /* Fall through */ |
| not_accepted: |
| if (op >> 8) { |
| resp = LMP_NOT_ACCEPTED_EXT; |
| resplen = 5; |
| respdata[0] = op >> 8; |
| respdata[1] = op & 0xff; |
| respdata[2] = error; |
| } else { |
| resp = LMP_NOT_ACCEPTED; |
| resplen = 3; |
| respdata[0] = op & 0xff; |
| respdata[1] = error; |
| } |
| } |
| |
| if (resp == 0) |
| return; |
| |
| if (resp >> 8) { |
| respdata[0] = resp >> 8; |
| respdata[1] = resp & 0xff; |
| } else |
| respdata[0] = resp & 0xff; |
| |
| respdata[0] <<= 1; |
| respdata[0] |= tr; |
| } |
| |
| static void bt_submit_raw_acl(struct bt_piconet_s *net, int length, uint8_t *data) |
| { |
| struct bt_device_s *slave; |
| if (length < 1) |
| return; |
| |
| slave = 0; |
| #if 0 |
| slave = net->slave; |
| #endif |
| |
| switch (data[0] & 3) { |
| case LLID_ACLC: |
| bt_submit_lmp(slave, length - 1, data + 1); |
| break; |
| case LLID_ACLU_START: |
| #if 0 |
| bt_sumbit_l2cap(slave, length - 1, data + 1, (data[0] >> 2) & 1); |
| breka; |
| #endif |
| default: |
| case LLID_ACLU_CONT: |
| break; |
| } |
| } |
| #endif |
| |
| /* HCI layer emulation */ |
| |
| /* Note: we could ignore endiannes because unswapped handles will still |
| * be valid as connection identifiers for the guest - they don't have to |
| * be continuously allocated. We do it though, to preserve similar |
| * behaviour between hosts. Some things, like the BD_ADDR cannot be |
| * preserved though (for example if a real hci is used). */ |
| #ifdef HOST_WORDS_BIGENDIAN |
| # define HNDL(raw) bswap16(raw) |
| #else |
| # define HNDL(raw) (raw) |
| #endif |
| |
| static const uint8_t bt_event_reserved_mask[8] = { |
| 0xff, 0x9f, 0xfb, 0xff, 0x07, 0x18, 0x00, 0x00, |
| }; |
| |
| static inline uint8_t *bt_hci_event_start(struct bt_hci_s *hci, |
| int evt, int len) |
| { |
| uint8_t *packet, mask; |
| int mask_byte; |
| |
| if (len > 255) { |
| fprintf(stderr, "%s: HCI event params too long (%ib)\n", |
| __FUNCTION__, len); |
| exit(-1); |
| } |
| |
| mask_byte = (evt - 1) >> 3; |
| mask = 1 << ((evt - 1) & 3); |
| if (mask & bt_event_reserved_mask[mask_byte] & ~hci->event_mask[mask_byte]) |
| return NULL; |
| |
| packet = hci->evt_packet(hci->opaque); |
| packet[0] = evt; |
| packet[1] = len; |
| |
| return &packet[2]; |
| } |
| |
| static inline void bt_hci_event(struct bt_hci_s *hci, int evt, |
| void *params, int len) |
| { |
| uint8_t *packet = bt_hci_event_start(hci, evt, len); |
| |
| if (!packet) |
| return; |
| |
| if (len) |
| memcpy(packet, params, len); |
| |
| hci->evt_submit(hci->opaque, len + 2); |
| } |
| |
| static inline void bt_hci_event_status(struct bt_hci_s *hci, int status) |
| { |
| evt_cmd_status params = { |
| .status = status, |
| .ncmd = 1, |
| .opcode = hci->last_cmd, |
| }; |
| |
| bt_hci_event(hci, EVT_CMD_STATUS, ¶ms, EVT_CMD_STATUS_SIZE); |
| } |
| |
| static inline void bt_hci_event_complete(struct bt_hci_s *hci, |
| void *ret, int len) |
| { |
| uint8_t *packet = bt_hci_event_start(hci, EVT_CMD_COMPLETE, |
| len + EVT_CMD_COMPLETE_SIZE); |
| evt_cmd_complete *params = (evt_cmd_complete *) packet; |
| |
| if (!packet) |
| return; |
| |
| params->ncmd = 1; |
| params->opcode = hci->last_cmd; |
| if (len) |
| memcpy(&packet[EVT_CMD_COMPLETE_SIZE], ret, len); |
| |
| hci->evt_submit(hci->opaque, len + EVT_CMD_COMPLETE_SIZE + 2); |
| } |
| |
| static void bt_hci_inquiry_done(void *opaque) |
| { |
| struct bt_hci_s *hci = (struct bt_hci_s *) opaque; |
| uint8_t status = HCI_SUCCESS; |
| |
| if (!hci->lm.periodic) |
| hci->lm.inquire = 0; |
| |
| /* The specification is inconsistent about this one. Page 565 reads |
| * "The event parameters of Inquiry Complete event will have a summary |
| * of the result from the Inquiry process, which reports the number of |
| * nearby Bluetooth devices that responded [so hci->responses].", but |
| * Event Parameters (see page 729) has only Status. */ |
| bt_hci_event(hci, EVT_INQUIRY_COMPLETE, &status, 1); |
| } |
| |
| static void bt_hci_inquiry_result_standard(struct bt_hci_s *hci, |
| struct bt_device_s *slave) |
| { |
| inquiry_info params = { |
| .num_responses = 1, |
| .bdaddr = BAINIT(&slave->bd_addr), |
| .pscan_rep_mode = 0x00, /* R0 */ |
| .pscan_period_mode = 0x00, /* P0 - deprecated */ |
| .pscan_mode = 0x00, /* Standard scan - deprecated */ |
| .dev_class[0] = slave->class[0], |
| .dev_class[1] = slave->class[1], |
| .dev_class[2] = slave->class[2], |
| /* TODO: return the clkoff *differenece* */ |
| .clock_offset = slave->clkoff, /* Note: no swapping */ |
| }; |
| |
| bt_hci_event(hci, EVT_INQUIRY_RESULT, ¶ms, INQUIRY_INFO_SIZE); |
| } |
| |
| static void bt_hci_inquiry_result_with_rssi(struct bt_hci_s *hci, |
| struct bt_device_s *slave) |
| { |
| inquiry_info_with_rssi params = { |
| .num_responses = 1, |
| .bdaddr = BAINIT(&slave->bd_addr), |
| .pscan_rep_mode = 0x00, /* R0 */ |
| .pscan_period_mode = 0x00, /* P0 - deprecated */ |
| .dev_class[0] = slave->class[0], |
| .dev_class[1] = slave->class[1], |
| .dev_class[2] = slave->class[2], |
| /* TODO: return the clkoff *differenece* */ |
| .clock_offset = slave->clkoff, /* Note: no swapping */ |
| .rssi = DEFAULT_RSSI_DBM, |
| }; |
| |
| bt_hci_event(hci, EVT_INQUIRY_RESULT_WITH_RSSI, |
| ¶ms, INQUIRY_INFO_WITH_RSSI_SIZE); |
| } |
| |
| static void bt_hci_inquiry_result(struct bt_hci_s *hci, |
| struct bt_device_s *slave) |
| { |
| if (!slave->inquiry_scan || !hci->lm.responses_left) |
| return; |
| |
| hci->lm.responses_left --; |
| hci->lm.responses ++; |
| |
| switch (hci->lm.inquiry_mode) { |
| case 0x00: |
| bt_hci_inquiry_result_standard(hci, slave); |
| return; |
| case 0x01: |
| bt_hci_inquiry_result_with_rssi(hci, slave); |
| return; |
| default: |
| fprintf(stderr, "%s: bad inquiry mode %02x\n", __FUNCTION__, |
| hci->lm.inquiry_mode); |
| exit(-1); |
| } |
| } |
| |
| static void bt_hci_mod_timer_1280ms(QEMUTimer *timer, int period) |
| { |
| timer_mod(timer, qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) + |
| muldiv64(period << 7, get_ticks_per_sec(), 100)); |
| } |
| |
| static void bt_hci_inquiry_start(struct bt_hci_s *hci, int length) |
| { |
| struct bt_device_s *slave; |
| |
| hci->lm.inquiry_length = length; |
| for (slave = hci->device.net->slave; slave; slave = slave->next) |
| /* Don't uncover ourselves. */ |
| if (slave != &hci->device) |
| bt_hci_inquiry_result(hci, slave); |
| |
| /* TODO: register for a callback on a new device's addition to the |
| * scatternet so that if it's added before inquiry_length expires, |
| * an Inquiry Result is generated immediately. Alternatively re-loop |
| * through the devices on the inquiry_length expiration and report |
| * devices not seen before. */ |
| if (hci->lm.responses_left) |
| bt_hci_mod_timer_1280ms(hci->lm.inquiry_done, hci->lm.inquiry_length); |
| else |
| bt_hci_inquiry_done(hci); |
| |
| if (hci->lm.periodic) |
| bt_hci_mod_timer_1280ms(hci->lm.inquiry_next, hci->lm.inquiry_period); |
| } |
| |
| static void bt_hci_inquiry_next(void *opaque) |
| { |
| struct bt_hci_s *hci = (struct bt_hci_s *) opaque; |
| |
| hci->lm.responses_left += hci->lm.responses; |
| hci->lm.responses = 0; |
| bt_hci_inquiry_start(hci, hci->lm.inquiry_length); |
| } |
| |
| static inline int bt_hci_handle_bad(struct bt_hci_s *hci, uint16_t handle) |
| { |
| return !(handle & HCI_HANDLE_OFFSET) || |
| handle >= (HCI_HANDLE_OFFSET | HCI_HANDLES_MAX) || |
| !hci->lm.handle[handle & ~HCI_HANDLE_OFFSET].link; |
| } |
| |
| static inline int bt_hci_role_master(struct bt_hci_s *hci, uint16_t handle) |
| { |
| return !!(hci->lm.role_bmp & (1 << (handle & ~HCI_HANDLE_OFFSET))); |
| } |
| |
| static inline struct bt_device_s *bt_hci_remote_dev(struct bt_hci_s *hci, |
| uint16_t handle) |
| { |
| struct bt_link_s *link = hci->lm.handle[handle & ~HCI_HANDLE_OFFSET].link; |
| |
| return bt_hci_role_master(hci, handle) ? link->slave : link->host; |
| } |
| |
| static void bt_hci_mode_tick(void *opaque); |
| static void bt_hci_lmp_link_establish(struct bt_hci_s *hci, |
| struct bt_link_s *link, int master) |
| { |
| hci->lm.handle[hci->lm.last_handle].link = link; |
| |
| if (master) { |
| /* We are the master side of an ACL link */ |
| hci->lm.role_bmp |= 1 << hci->lm.last_handle; |
| |
| hci->lm.handle[hci->lm.last_handle].lmp_acl_data = |
| link->slave->lmp_acl_data; |
| } else { |
| /* We are the slave side of an ACL link */ |
| hci->lm.role_bmp &= ~(1 << hci->lm.last_handle); |
| |
| hci->lm.handle[hci->lm.last_handle].lmp_acl_data = |
| link->host->lmp_acl_resp; |
| } |
| |
| /* Mode */ |
| if (master) { |
| link->acl_mode = acl_active; |
| hci->lm.handle[hci->lm.last_handle].acl_mode_timer = |
| timer_new(QEMU_CLOCK_VIRTUAL, SCALE_NS, bt_hci_mode_tick, link); |
| } |
| } |
| |
| static void bt_hci_lmp_link_teardown(struct bt_hci_s *hci, uint16_t handle) |
| { |
| handle &= ~HCI_HANDLE_OFFSET; |
| hci->lm.handle[handle].link = NULL; |
| |
| if (bt_hci_role_master(hci, handle)) { |
| timer_del(hci->lm.handle[handle].acl_mode_timer); |
| timer_free(hci->lm.handle[handle].acl_mode_timer); |
| } |
| } |
| |
| static int bt_hci_connect(struct bt_hci_s *hci, bdaddr_t *bdaddr) |
| { |
| struct bt_device_s *slave; |
| struct bt_link_s link; |
| |
| for (slave = hci->device.net->slave; slave; slave = slave->next) |
| if (slave->page_scan && !bacmp(&slave->bd_addr, bdaddr)) |
| break; |
| if (!slave || slave == &hci->device) |
| return -ENODEV; |
| |
| bacpy(&hci->lm.awaiting_bdaddr[hci->lm.connecting ++], &slave->bd_addr); |
| |
| link.slave = slave; |
| link.host = &hci->device; |
| link.slave->lmp_connection_request(&link); /* Always last */ |
| |
| return 0; |
| } |
| |
| static void bt_hci_connection_reject(struct bt_hci_s *hci, |
| struct bt_device_s *host, uint8_t because) |
| { |
| struct bt_link_s link = { |
| .slave = &hci->device, |
| .host = host, |
| /* Rest uninitialised */ |
| }; |
| |
| host->reject_reason = because; |
| host->lmp_connection_complete(&link); |
| } |
| |
| static void bt_hci_connection_reject_event(struct bt_hci_s *hci, |
| bdaddr_t *bdaddr) |
| { |
| evt_conn_complete params; |
| |
| params.status = HCI_NO_CONNECTION; |
| params.handle = 0; |
| bacpy(¶ms.bdaddr, bdaddr); |
| params.link_type = ACL_LINK; |
| params.encr_mode = 0x00; /* Encryption not required */ |
| bt_hci_event(hci, EVT_CONN_COMPLETE, ¶ms, EVT_CONN_COMPLETE_SIZE); |
| } |
| |
| static void bt_hci_connection_accept(struct bt_hci_s *hci, |
| struct bt_device_s *host) |
| { |
| struct bt_hci_link_s *link = g_malloc0(sizeof(struct bt_hci_link_s)); |
| evt_conn_complete params; |
| uint16_t handle; |
| uint8_t status = HCI_SUCCESS; |
| int tries = HCI_HANDLES_MAX; |
| |
| /* Make a connection handle */ |
| do { |
| while (hci->lm.handle[++ hci->lm.last_handle].link && -- tries) |
| hci->lm.last_handle &= HCI_HANDLES_MAX - 1; |
| handle = hci->lm.last_handle | HCI_HANDLE_OFFSET; |
| } while ((handle == hci->asb_handle || handle == hci->psb_handle) && |
| tries); |
| |
| if (!tries) { |
| g_free(link); |
| bt_hci_connection_reject(hci, host, HCI_REJECTED_LIMITED_RESOURCES); |
| status = HCI_NO_CONNECTION; |
| goto complete; |
| } |
| |
| link->btlink.slave = &hci->device; |
| link->btlink.host = host; |
| link->handle = handle; |
| |
| /* Link established */ |
| bt_hci_lmp_link_establish(hci, &link->btlink, 0); |
| |
| complete: |
| params.status = status; |
| params.handle = HNDL(handle); |
| bacpy(¶ms.bdaddr, &host->bd_addr); |
| params.link_type = ACL_LINK; |
| params.encr_mode = 0x00; /* Encryption not required */ |
| bt_hci_event(hci, EVT_CONN_COMPLETE, ¶ms, EVT_CONN_COMPLETE_SIZE); |
| |
| /* Neets to be done at the very end because it can trigger a (nested) |
| * disconnected, in case the other and had cancelled the request |
| * locally. */ |
| if (status == HCI_SUCCESS) { |
| host->reject_reason = 0; |
| host->lmp_connection_complete(&link->btlink); |
| } |
| } |
| |
| static void bt_hci_lmp_connection_request(struct bt_link_s *link) |
| { |
| struct bt_hci_s *hci = hci_from_device(link->slave); |
| evt_conn_request params; |
| |
| if (hci->conn_req_host) { |
| bt_hci_connection_reject(hci, link->host, |
| HCI_REJECTED_LIMITED_RESOURCES); |
| return; |
| } |
| hci->conn_req_host = link->host; |
| /* TODO: if masked and auto-accept, then auto-accept, |
| * if masked and not auto-accept, then auto-reject */ |
| /* TODO: kick the hci->conn_accept_timer, timeout after |
| * hci->conn_accept_tout * 0.625 msec */ |
| |
| bacpy(¶ms.bdaddr, &link->host->bd_addr); |
| memcpy(¶ms.dev_class, &link->host->class, sizeof(params.dev_class)); |
| params.link_type = ACL_LINK; |
| bt_hci_event(hci, EVT_CONN_REQUEST, ¶ms, EVT_CONN_REQUEST_SIZE); |
| return; |
| } |
| |
| static void bt_hci_conn_accept_timeout(void *opaque) |
| { |
| struct bt_hci_s *hci = (struct bt_hci_s *) opaque; |
| |
| if (!hci->conn_req_host) |
| /* Already accepted or rejected. If the other end cancelled the |
| * connection request then we still have to reject or accept it |
| * and then we'll get a disconnect. */ |
| return; |
| |
| /* TODO */ |
| } |
| |
| /* Remove from the list of devices which we wanted to connect to and |
| * are awaiting a response from. If the callback sees a response from |
| * a device which is not on the list it will assume it's a connection |
| * that's been cancelled by the host in the meantime and immediately |
| * try to detach the link and send a Connection Complete. */ |
| static int bt_hci_lmp_connection_ready(struct bt_hci_s *hci, |
| bdaddr_t *bdaddr) |
| { |
| int i; |
| |
| for (i = 0; i < hci->lm.connecting; i ++) |
| if (!bacmp(&hci->lm.awaiting_bdaddr[i], bdaddr)) { |
| if (i < -- hci->lm.connecting) |
| bacpy(&hci->lm.awaiting_bdaddr[i], |
| &hci->lm.awaiting_bdaddr[hci->lm.connecting]); |
| return 0; |
| } |
| |
| return 1; |
| } |
| |
| static void bt_hci_lmp_connection_complete(struct bt_link_s *link) |
| { |
| struct bt_hci_s *hci = hci_from_device(link->host); |
| evt_conn_complete params; |
| uint16_t handle; |
| uint8_t status = HCI_SUCCESS; |
| int tries = HCI_HANDLES_MAX; |
| |
| if (bt_hci_lmp_connection_ready(hci, &link->slave->bd_addr)) { |
| if (!hci->device.reject_reason) |
| link->slave->lmp_disconnect_slave(link); |
| handle = 0; |
| status = HCI_NO_CONNECTION; |
| goto complete; |
| } |
| |
| if (hci->device.reject_reason) { |
| handle = 0; |
| status = hci->device.reject_reason; |
| goto complete; |
| } |
| |
| /* Make a connection handle */ |
| do { |
| while (hci->lm.handle[++ hci->lm.last_handle].link && -- tries) |
| hci->lm.last_handle &= HCI_HANDLES_MAX - 1; |
| handle = hci->lm.last_handle | HCI_HANDLE_OFFSET; |
| } while ((handle == hci->asb_handle || handle == hci->psb_handle) && |
| tries); |
| |
| if (!tries) { |
| link->slave->lmp_disconnect_slave(link); |
| status = HCI_NO_CONNECTION; |
| goto complete; |
| } |
| |
| /* Link established */ |
| link->handle = handle; |
| bt_hci_lmp_link_establish(hci, link, 1); |
| |
| complete: |
| params.status = status; |
| params.handle = HNDL(handle); |
| params.link_type = ACL_LINK; |
| bacpy(¶ms.bdaddr, &link->slave->bd_addr); |
| params.encr_mode = 0x00; /* Encryption not required */ |
| bt_hci_event(hci, EVT_CONN_COMPLETE, ¶ms, EVT_CONN_COMPLETE_SIZE); |
| } |
| |
| static void bt_hci_disconnect(struct bt_hci_s *hci, |
| uint16_t handle, int reason) |
| { |
| struct bt_link_s *btlink = |
| hci->lm.handle[handle & ~HCI_HANDLE_OFFSET].link; |
| struct bt_hci_link_s *link; |
| evt_disconn_complete params; |
| |
| if (bt_hci_role_master(hci, handle)) { |
| btlink->slave->reject_reason = reason; |
| btlink->slave->lmp_disconnect_slave(btlink); |
| /* The link pointer is invalid from now on */ |
| |
| goto complete; |
| } |
| |
| btlink->host->reject_reason = reason; |
| btlink->host->lmp_disconnect_master(btlink); |
| |
| /* We are the slave, we get to clean this burden */ |
| link = (struct bt_hci_link_s *) btlink; |
| g_free(link); |
| |
| complete: |
| bt_hci_lmp_link_teardown(hci, handle); |
| |
| params.status = HCI_SUCCESS; |
| params.handle = HNDL(handle); |
| params.reason = HCI_CONNECTION_TERMINATED; |
| bt_hci_event(hci, EVT_DISCONN_COMPLETE, |
| ¶ms, EVT_DISCONN_COMPLETE_SIZE); |
| } |
| |
| /* TODO: use only one function */ |
| static void bt_hci_lmp_disconnect_host(struct bt_link_s *link) |
| { |
| struct bt_hci_s *hci = hci_from_device(link->host); |
| uint16_t handle = link->handle; |
| evt_disconn_complete params; |
| |
| bt_hci_lmp_link_teardown(hci, handle); |
| |
| params.status = HCI_SUCCESS; |
| params.handle = HNDL(handle); |
| params.reason = hci->device.reject_reason; |
| bt_hci_event(hci, EVT_DISCONN_COMPLETE, |
| ¶ms, EVT_DISCONN_COMPLETE_SIZE); |
| } |
| |
| static void bt_hci_lmp_disconnect_slave(struct bt_link_s *btlink) |
| { |
| struct bt_hci_link_s *link = (struct bt_hci_link_s *) btlink; |
| struct bt_hci_s *hci = hci_from_device(btlink->slave); |
| uint16_t handle = link->handle; |
| evt_disconn_complete params; |
| |
| g_free(link); |
| |
| bt_hci_lmp_link_teardown(hci, handle); |
| |
| params.status = HCI_SUCCESS; |
| params.handle = HNDL(handle); |
| params.reason = hci->device.reject_reason; |
| bt_hci_event(hci, EVT_DISCONN_COMPLETE, |
| ¶ms, EVT_DISCONN_COMPLETE_SIZE); |
| } |
| |
| static int bt_hci_name_req(struct bt_hci_s *hci, bdaddr_t *bdaddr) |
| { |
| struct bt_device_s *slave; |
| evt_remote_name_req_complete params; |
| int len; |
| |
| for (slave = hci->device.net->slave; slave; slave = slave->next) |
| if (slave->page_scan && !bacmp(&slave->bd_addr, bdaddr)) |
| break; |
| if (!slave) |
| return -ENODEV; |
| |
| bt_hci_event_status(hci, HCI_SUCCESS); |
| |
| params.status = HCI_SUCCESS; |
| bacpy(¶ms.bdaddr, &slave->bd_addr); |
| len = snprintf(params.name, sizeof(params.name), |
| "%s", slave->lmp_name ?: ""); |
| memset(params.name + len, 0, sizeof(params.name) - len); |
| bt_hci_event(hci, EVT_REMOTE_NAME_REQ_COMPLETE, |
| ¶ms, EVT_REMOTE_NAME_REQ_COMPLETE_SIZE); |
| |
| return 0; |
| } |
| |
| static int bt_hci_features_req(struct bt_hci_s *hci, uint16_t handle) |
| { |
| struct bt_device_s *slave; |
| evt_read_remote_features_complete params; |
| |
| if (bt_hci_handle_bad(hci, handle)) |
| return -ENODEV; |
| |
| slave = bt_hci_remote_dev(hci, handle); |
| |
| bt_hci_event_status(hci, HCI_SUCCESS); |
| |
| params.status = HCI_SUCCESS; |
| params.handle = HNDL(handle); |
| params.features[0] = (slave->lmp_caps >> 0) & 0xff; |
| params.features[1] = (slave->lmp_caps >> 8) & 0xff; |
| params.features[2] = (slave->lmp_caps >> 16) & 0xff; |
| params.features[3] = (slave->lmp_caps >> 24) & 0xff; |
| params.features[4] = (slave->lmp_caps >> 32) & 0xff; |
| params.features[5] = (slave->lmp_caps >> 40) & 0xff; |
| params.features[6] = (slave->lmp_caps >> 48) & 0xff; |
| params.features[7] = (slave->lmp_caps >> 56) & 0xff; |
| bt_hci_event(hci, EVT_READ_REMOTE_FEATURES_COMPLETE, |
| ¶ms, EVT_READ_REMOTE_FEATURES_COMPLETE_SIZE); |
| |
| return 0; |
| } |
| |
| static int bt_hci_version_req(struct bt_hci_s *hci, uint16_t handle) |
| { |
| evt_read_remote_version_complete params; |
| |
| if (bt_hci_handle_bad(hci, handle)) |
| return -ENODEV; |
| |
| bt_hci_remote_dev(hci, handle); |
| |
| bt_hci_event_status(hci, HCI_SUCCESS); |
| |
| params.status = HCI_SUCCESS; |
| params.handle = HNDL(handle); |
| params.lmp_ver = 0x03; |
| params.manufacturer = cpu_to_le16(0xa000); |
| params.lmp_subver = cpu_to_le16(0xa607); |
| bt_hci_event(hci, EVT_READ_REMOTE_VERSION_COMPLETE, |
| ¶ms, EVT_READ_REMOTE_VERSION_COMPLETE_SIZE); |
| |
| return 0; |
| } |
| |
| static int bt_hci_clkoffset_req(struct bt_hci_s *hci, uint16_t handle) |
| { |
| struct bt_device_s *slave; |
| evt_read_clock_offset_complete params; |
| |
| if (bt_hci_handle_bad(hci, handle)) |
| return -ENODEV; |
| |
| slave = bt_hci_remote_dev(hci, handle); |
| |
| bt_hci_event_status(hci, HCI_SUCCESS); |
| |
| params.status = HCI_SUCCESS; |
| params.handle = HNDL(handle); |
| /* TODO: return the clkoff *differenece* */ |
| params.clock_offset = slave->clkoff; /* Note: no swapping */ |
| bt_hci_event(hci, EVT_READ_CLOCK_OFFSET_COMPLETE, |
| ¶ms, EVT_READ_CLOCK_OFFSET_COMPLETE_SIZE); |
| |
| return 0; |
| } |
| |
| static void bt_hci_event_mode(struct bt_hci_s *hci, struct bt_link_s *link, |
| uint16_t handle) |
| { |
| evt_mode_change params = { |
| .status = HCI_SUCCESS, |
| .handle = HNDL(handle), |
| .mode = link->acl_mode, |
| .interval = cpu_to_le16(link->acl_interval), |
| }; |
| |
| bt_hci_event(hci, EVT_MODE_CHANGE, ¶ms, EVT_MODE_CHANGE_SIZE); |
| } |
| |
| static void bt_hci_lmp_mode_change_master(struct bt_hci_s *hci, |
| struct bt_link_s *link, int mode, uint16_t interval) |
| { |
| link->acl_mode = mode; |
| link->acl_interval = interval; |
| |
| bt_hci_event_mode(hci, link, link->handle); |
| |
| link->slave->lmp_mode_change(link); |
| } |
| |
| static void bt_hci_lmp_mode_change_slave(struct bt_link_s *btlink) |
| { |
| struct bt_hci_link_s *link = (struct bt_hci_link_s *) btlink; |
| struct bt_hci_s *hci = hci_from_device(btlink->slave); |
| |
| bt_hci_event_mode(hci, btlink, link->handle); |
| } |
| |
| static int bt_hci_mode_change(struct bt_hci_s *hci, uint16_t handle, |
| int interval, int mode) |
| { |
| struct bt_hci_master_link_s *link; |
| |
| if (bt_hci_handle_bad(hci, handle) || !bt_hci_role_master(hci, handle)) |
| return -ENODEV; |
| |
| link = &hci->lm.handle[handle & ~HCI_HANDLE_OFFSET]; |
| if (link->link->acl_mode != acl_active) { |
| bt_hci_event_status(hci, HCI_COMMAND_DISALLOWED); |
| return 0; |
| } |
| |
| bt_hci_event_status(hci, HCI_SUCCESS); |
| |
| timer_mod(link->acl_mode_timer, qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) + |
| muldiv64(interval * 625, get_ticks_per_sec(), 1000000)); |
| bt_hci_lmp_mode_change_master(hci, link->link, mode, interval); |
| |
| return 0; |
| } |
| |
| static int bt_hci_mode_cancel(struct bt_hci_s *hci, uint16_t handle, int mode) |
| { |
| struct bt_hci_master_link_s *link; |
| |
| if (bt_hci_handle_bad(hci, handle) || !bt_hci_role_master(hci, handle)) |
| return -ENODEV; |
| |
| link = &hci->lm.handle[handle & ~HCI_HANDLE_OFFSET]; |
| if (link->link->acl_mode != mode) { |
| bt_hci_event_status(hci, HCI_COMMAND_DISALLOWED); |
| |
| return 0; |
| } |
| |
| bt_hci_event_status(hci, HCI_SUCCESS); |
| |
| timer_del(link->acl_mode_timer); |
| bt_hci_lmp_mode_change_master(hci, link->link, acl_active, 0); |
| |
| return 0; |
| } |
| |
| static void bt_hci_mode_tick(void *opaque) |
| { |
| struct bt_link_s *link = opaque; |
| struct bt_hci_s *hci = hci_from_device(link->host); |
| |
| bt_hci_lmp_mode_change_master(hci, link, acl_active, 0); |
| } |
| |
| static void bt_hci_reset(struct bt_hci_s *hci) |
| { |
| hci->acl_len = 0; |
| hci->last_cmd = 0; |
| hci->lm.connecting = 0; |
| |
| hci->event_mask[0] = 0xff; |
| hci->event_mask[1] = 0xff; |
| hci->event_mask[2] = 0xff; |
| hci->event_mask[3] = 0xff; |
| hci->event_mask[4] = 0xff; |
| hci->event_mask[5] = 0x1f; |
| hci->event_mask[6] = 0x00; |
| hci->event_mask[7] = 0x00; |
| hci->device.inquiry_scan = 0; |
| hci->device.page_scan = 0; |
| if (hci->device.lmp_name) |
| g_free((void *) hci->device.lmp_name); |
| hci->device.lmp_name = NULL; |
| hci->device.class[0] = 0x00; |
| hci->device.class[1] = 0x00; |
| hci->device.class[2] = 0x00; |
| hci->voice_setting = 0x0000; |
| hci->conn_accept_tout = 0x1f40; |
| hci->lm.inquiry_mode = 0x00; |
| |
| hci->psb_handle = 0x000; |
| hci->asb_handle = 0x000; |
| |
| /* XXX: timer_del(sl->acl_mode_timer); for all links */ |
| timer_del(hci->lm.inquiry_done); |
| timer_del(hci->lm.inquiry_next); |
| timer_del(hci->conn_accept_timer); |
| } |
| |
| static void bt_hci_read_local_version_rp(struct bt_hci_s *hci) |
| { |
| read_local_version_rp lv = { |
| .status = HCI_SUCCESS, |
| .hci_ver = 0x03, |
| .hci_rev = cpu_to_le16(0xa607), |
| .lmp_ver = 0x03, |
| .manufacturer = cpu_to_le16(0xa000), |
| .lmp_subver = cpu_to_le16(0xa607), |
| }; |
| |
| bt_hci_event_complete(hci, &lv, READ_LOCAL_VERSION_RP_SIZE); |
| } |
| |
| static void bt_hci_read_local_commands_rp(struct bt_hci_s *hci) |
| { |
| read_local_commands_rp lc = { |
| .status = HCI_SUCCESS, |
| .commands = { |
| /* Keep updated! */ |
| /* Also, keep in sync with hci->device.lmp_caps in bt_new_hci */ |
| 0xbf, 0x80, 0xf9, 0x03, 0xb2, 0xc0, 0x03, 0xc3, |
| 0x00, 0x0f, 0x80, 0x00, 0xc0, 0x00, 0xe8, 0x13, |
| 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
| 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
| 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
| 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
| 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
| 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
| }, |
| }; |
| |
| bt_hci_event_complete(hci, &lc, READ_LOCAL_COMMANDS_RP_SIZE); |
| } |
| |
| static void bt_hci_read_local_features_rp(struct bt_hci_s *hci) |
| { |
| read_local_features_rp lf = { |
| .status = HCI_SUCCESS, |
| .features = { |
| (hci->device.lmp_caps >> 0) & 0xff, |
| (hci->device.lmp_caps >> 8) & 0xff, |
| (hci->device.lmp_caps >> 16) & 0xff, |
| (hci->device.lmp_caps >> 24) & 0xff, |
| (hci->device.lmp_caps >> 32) & 0xff, |
| (hci->device.lmp_caps >> 40) & 0xff, |
| (hci->device.lmp_caps >> 48) & 0xff, |
| (hci->device.lmp_caps >> 56) & 0xff, |
| }, |
| }; |
| |
| bt_hci_event_complete(hci, &lf, READ_LOCAL_FEATURES_RP_SIZE); |
| } |
| |
| static void bt_hci_read_local_ext_features_rp(struct bt_hci_s *hci, int page) |
| { |
| read_local_ext_features_rp lef = { |
| .status = HCI_SUCCESS, |
| .page_num = page, |
| .max_page_num = 0x00, |
| .features = { |
| /* Keep updated! */ |
| 0x5f, 0x35, 0x85, 0x7e, 0x9b, 0x19, 0x00, 0x80, |
| }, |
| }; |
| if (page) |
| memset(lef.features, 0, sizeof(lef.features)); |
| |
| bt_hci_event_complete(hci, &lef, READ_LOCAL_EXT_FEATURES_RP_SIZE); |
| } |
| |
| static void bt_hci_read_buffer_size_rp(struct bt_hci_s *hci) |
| { |
| read_buffer_size_rp bs = { |
| /* This can be made configurable, for one standard USB dongle HCI |
| * the four values are cpu_to_le16(0x0180), 0x40, |
| * cpu_to_le16(0x0008), cpu_to_le16(0x0008). */ |
| .status = HCI_SUCCESS, |
| .acl_mtu = cpu_to_le16(0x0200), |
| .sco_mtu = 0, |
| .acl_max_pkt = cpu_to_le16(0x0001), |
| .sco_max_pkt = cpu_to_le16(0x0000), |
| }; |
| |
| bt_hci_event_complete(hci, &bs, READ_BUFFER_SIZE_RP_SIZE); |
| } |
| |
| /* Deprecated in V2.0 (page 661) */ |
| static void bt_hci_read_country_code_rp(struct bt_hci_s *hci) |
| { |
| read_country_code_rp cc ={ |
| .status = HCI_SUCCESS, |
| .country_code = 0x00, /* North America & Europe^1 and Japan */ |
| }; |
| |
| bt_hci_event_complete(hci, &cc, READ_COUNTRY_CODE_RP_SIZE); |
| |
| /* ^1. Except France, sorry */ |
| } |
| |
| static void bt_hci_read_bd_addr_rp(struct bt_hci_s *hci) |
| { |
| read_bd_addr_rp ba = { |
| .status = HCI_SUCCESS, |
| .bdaddr = BAINIT(&hci->device.bd_addr), |
| }; |
| |
| bt_hci_event_complete(hci, &ba, READ_BD_ADDR_RP_SIZE); |
| } |
| |
| static int bt_hci_link_quality_rp(struct bt_hci_s *hci, uint16_t handle) |
| { |
| read_link_quality_rp lq = { |
| .status = HCI_SUCCESS, |
| .handle = HNDL(handle), |
| .link_quality = 0xff, |
| }; |
| |
| if (bt_hci_handle_bad(hci, handle)) |
| lq.status = HCI_NO_CONNECTION; |
| |
| bt_hci_event_complete(hci, &lq, READ_LINK_QUALITY_RP_SIZE); |
| return 0; |
| } |
| |
| /* Generate a Command Complete event with only the Status parameter */ |
| static inline void bt_hci_event_complete_status(struct bt_hci_s *hci, |
| uint8_t status) |
| { |
| bt_hci_event_complete(hci, &status, 1); |
| } |
| |
| static inline void bt_hci_event_complete_conn_cancel(struct bt_hci_s *hci, |
| uint8_t status, bdaddr_t *bd_addr) |
| { |
| create_conn_cancel_rp params = { |
| .status = status, |
| .bdaddr = BAINIT(bd_addr), |
| }; |
| |
| bt_hci_event_complete(hci, ¶ms, CREATE_CONN_CANCEL_RP_SIZE); |
| } |
| |
| static inline void bt_hci_event_auth_complete(struct bt_hci_s *hci, |
| uint16_t handle) |
| { |
| evt_auth_complete params = { |
| .status = HCI_SUCCESS, |
| .handle = HNDL(handle), |
| }; |
| |
| bt_hci_event(hci, EVT_AUTH_COMPLETE, ¶ms, EVT_AUTH_COMPLETE_SIZE); |
| } |
| |
| static inline void bt_hci_event_encrypt_change(struct bt_hci_s *hci, |
| uint16_t handle, uint8_t mode) |
| { |
| evt_encrypt_change params = { |
| .status = HCI_SUCCESS, |
| .handle = HNDL(handle), |
| .encrypt = mode, |
| }; |
| |
| bt_hci_event(hci, EVT_ENCRYPT_CHANGE, ¶ms, EVT_ENCRYPT_CHANGE_SIZE); |
| } |
| |
| static inline void bt_hci_event_complete_name_cancel(struct bt_hci_s *hci, |
| bdaddr_t *bd_addr) |
| { |
| remote_name_req_cancel_rp params = { |
| .status = HCI_INVALID_PARAMETERS, |
| .bdaddr = BAINIT(bd_addr), |
| }; |
| |
| bt_hci_event_complete(hci, ¶ms, REMOTE_NAME_REQ_CANCEL_RP_SIZE); |
| } |
| |
| static inline void bt_hci_event_read_remote_ext_features(struct bt_hci_s *hci, |
| uint16_t handle) |
| { |
| evt_read_remote_ext_features_complete params = { |
| .status = HCI_UNSUPPORTED_FEATURE, |
| .handle = HNDL(handle), |
| /* Rest uninitialised */ |
| }; |
| |
| bt_hci_event(hci, EVT_READ_REMOTE_EXT_FEATURES_COMPLETE, |
| ¶ms, EVT_READ_REMOTE_EXT_FEATURES_COMPLETE_SIZE); |
| } |
| |
| static inline void bt_hci_event_complete_lmp_handle(struct bt_hci_s *hci, |
| uint16_t handle) |
| { |
| read_lmp_handle_rp params = { |
| .status = HCI_NO_CONNECTION, |
| .handle = HNDL(handle), |
| .reserved = 0, |
| /* Rest uninitialised */ |
| }; |
| |
| bt_hci_event_complete(hci, ¶ms, READ_LMP_HANDLE_RP_SIZE); |
| } |
| |
| static inline void bt_hci_event_complete_role_discovery(struct bt_hci_s *hci, |
| int status, uint16_t handle, int master) |
| { |
| role_discovery_rp params = { |
| .status = status, |
| .handle = HNDL(handle), |
| .role = master ? 0x00 : 0x01, |
| }; |
| |
| bt_hci_event_complete(hci, ¶ms, ROLE_DISCOVERY_RP_SIZE); |
| } |
| |
| static inline void bt_hci_event_complete_flush(struct bt_hci_s *hci, |
| int status, uint16_t handle) |
| { |
| flush_rp params = { |
| .status = status, |
| .handle = HNDL(handle), |
| }; |
| |
| bt_hci_event_complete(hci, ¶ms, FLUSH_RP_SIZE); |
| } |
| |
| static inline void bt_hci_event_complete_read_local_name(struct bt_hci_s *hci) |
| { |
| read_local_name_rp params; |
| params.status = HCI_SUCCESS; |
| memset(params.name, 0, sizeof(params.name)); |
| if (hci->device.lmp_name) |
| strncpy(params.name, hci->device.lmp_name, sizeof(params.name)); |
| |
| bt_hci_event_complete(hci, ¶ms, READ_LOCAL_NAME_RP_SIZE); |
| } |
| |
| static inline void bt_hci_event_complete_read_conn_accept_timeout( |
| struct bt_hci_s *hci) |
| { |
| read_conn_accept_timeout_rp params = { |
| .status = HCI_SUCCESS, |
| .timeout = cpu_to_le16(hci->conn_accept_tout), |
| }; |
| |
| bt_hci_event_complete(hci, ¶ms, READ_CONN_ACCEPT_TIMEOUT_RP_SIZE); |
| } |
| |
| static inline void bt_hci_event_complete_read_scan_enable(struct bt_hci_s *hci) |
| { |
| read_scan_enable_rp params = { |
| .status = HCI_SUCCESS, |
| .enable = |
| (hci->device.inquiry_scan ? SCAN_INQUIRY : 0) | |
| (hci->device.page_scan ? SCAN_PAGE : 0), |
| }; |
| |
| bt_hci_event_complete(hci, ¶ms, READ_SCAN_ENABLE_RP_SIZE); |
| } |
| |
| static inline void bt_hci_event_complete_read_local_class(struct bt_hci_s *hci) |
| { |
| read_class_of_dev_rp params; |
| |
| params.status = HCI_SUCCESS; |
| memcpy(params.dev_class, hci->device.class, sizeof(params.dev_class)); |
| |
| bt_hci_event_complete(hci, ¶ms, READ_CLASS_OF_DEV_RP_SIZE); |
| } |
| |
| static inline void bt_hci_event_complete_voice_setting(struct bt_hci_s *hci) |
| { |
| read_voice_setting_rp params = { |
| .status = HCI_SUCCESS, |
| .voice_setting = hci->voice_setting, /* Note: no swapping */ |
| }; |
| |
| bt_hci_event_complete(hci, ¶ms, READ_VOICE_SETTING_RP_SIZE); |
| } |
| |
| static inline void bt_hci_event_complete_read_inquiry_mode( |
| struct bt_hci_s *hci) |
| { |
| read_inquiry_mode_rp params = { |
| .status = HCI_SUCCESS, |
| .mode = hci->lm.inquiry_mode, |
| }; |
| |
| bt_hci_event_complete(hci, ¶ms, READ_INQUIRY_MODE_RP_SIZE); |
| } |
| |
| static inline void bt_hci_event_num_comp_pkts(struct bt_hci_s *hci, |
| uint16_t handle, int packets) |
| { |
| uint16_t buf[EVT_NUM_COMP_PKTS_SIZE(1) / 2 + 1]; |
| evt_num_comp_pkts *params = (void *) ((uint8_t *) buf + 1); |
| |
| params->num_hndl = 1; |
| params->connection->handle = HNDL(handle); |
| params->connection->num_packets = cpu_to_le16(packets); |
| |
| bt_hci_event(hci, EVT_NUM_COMP_PKTS, params, EVT_NUM_COMP_PKTS_SIZE(1)); |
| } |
| |
| static void bt_submit_hci(struct HCIInfo *info, |
| const uint8_t *data, int length) |
| { |
| struct bt_hci_s *hci = hci_from_info(info); |
| uint16_t cmd; |
| int paramlen, i; |
| |
| if (length < HCI_COMMAND_HDR_SIZE) |
| goto short_hci; |
| |
| memcpy(&hci->last_cmd, data, 2); |
| |
| cmd = (data[1] << 8) | data[0]; |
| paramlen = data[2]; |
| if (cmd_opcode_ogf(cmd) == 0 || cmd_opcode_ocf(cmd) == 0) /* NOP */ |
| return; |
| |
| data += HCI_COMMAND_HDR_SIZE; |
| length -= HCI_COMMAND_HDR_SIZE; |
| |
| if (paramlen > length) |
| return; |
| |
| #define PARAM(cmd, param) (((cmd##_cp *) data)->param) |
| #define PARAM16(cmd, param) le16_to_cpup(&PARAM(cmd, param)) |
| #define PARAMHANDLE(cmd) HNDL(PARAM(cmd, handle)) |
| #define LENGTH_CHECK(cmd) if (length < sizeof(cmd##_cp)) goto short_hci |
| /* Note: the supported commands bitmask in bt_hci_read_local_commands_rp |
| * needs to be updated every time a command is implemented here! */ |
| switch (cmd) { |
| case cmd_opcode_pack(OGF_LINK_CTL, OCF_INQUIRY): |
| LENGTH_CHECK(inquiry); |
| |
| if (PARAM(inquiry, length) < 1) { |
| bt_hci_event_complete_status(hci, HCI_INVALID_PARAMETERS); |
| break; |
| } |
| |
| hci->lm.inquire = 1; |
| hci->lm.periodic = 0; |
| hci->lm.responses_left = PARAM(inquiry, num_rsp) ?: INT_MAX; |
| hci->lm.responses = 0; |
| bt_hci_event_status(hci, HCI_SUCCESS); |
| bt_hci_inquiry_start(hci, PARAM(inquiry, length)); |
| break; |
| |
| case cmd_opcode_pack(OGF_LINK_CTL, OCF_INQUIRY_CANCEL): |
| if (!hci->lm.inquire || hci->lm.periodic) { |
| fprintf(stderr, "%s: Inquiry Cancel should only be issued after " |
| "the Inquiry command has been issued, a Command " |
| "Status event has been received for the Inquiry " |
| "command, and before the Inquiry Complete event " |
| "occurs", __FUNCTION__); |
| bt_hci_event_complete_status(hci, HCI_COMMAND_DISALLOWED); |
| break; |
| } |
| |
| hci->lm.inquire = 0; |
| timer_del(hci->lm.inquiry_done); |
| bt_hci_event_complete_status(hci, HCI_SUCCESS); |
| break; |
| |
| case cmd_opcode_pack(OGF_LINK_CTL, OCF_PERIODIC_INQUIRY): |
| LENGTH_CHECK(periodic_inquiry); |
| |
| if (!(PARAM(periodic_inquiry, length) < |
| PARAM16(periodic_inquiry, min_period) && |
| PARAM16(periodic_inquiry, min_period) < |
| PARAM16(periodic_inquiry, max_period)) || |
| PARAM(periodic_inquiry, length) < 1 || |
| PARAM16(periodic_inquiry, min_period) < 2 || |
| PARAM16(periodic_inquiry, max_period) < 3) { |
| bt_hci_event_complete_status(hci, HCI_INVALID_PARAMETERS); |
| break; |
| } |
| |
| hci->lm.inquire = 1; |
| hci->lm.periodic = 1; |
| hci->lm.responses_left = PARAM(periodic_inquiry, num_rsp); |
| hci->lm.responses = 0; |
| hci->lm.inquiry_period = PARAM16(periodic_inquiry, max_period); |
| bt_hci_event_complete_status(hci, HCI_SUCCESS); |
| bt_hci_inquiry_start(hci, PARAM(periodic_inquiry, length)); |
| break; |
| |
| case cmd_opcode_pack(OGF_LINK_CTL, OCF_EXIT_PERIODIC_INQUIRY): |
| if (!hci->lm.inquire || !hci->lm.periodic) { |
| fprintf(stderr, "%s: Inquiry Cancel should only be issued after " |
| "the Inquiry command has been issued, a Command " |
| "Status event has been received for the Inquiry " |
| "command, and before the Inquiry Complete event " |
| "occurs", __FUNCTION__); |
| bt_hci_event_complete_status(hci, HCI_COMMAND_DISALLOWED); |
| break; |
| } |
| hci->lm.inquire = 0; |
| timer_del(hci->lm.inquiry_done); |
| timer_del(hci->lm.inquiry_next); |
| bt_hci_event_complete_status(hci, HCI_SUCCESS); |
| break; |
| |
| case cmd_opcode_pack(OGF_LINK_CTL, OCF_CREATE_CONN): |
| LENGTH_CHECK(create_conn); |
| |
| if (hci->lm.connecting >= HCI_HANDLES_MAX) { |
| bt_hci_event_status(hci, HCI_REJECTED_LIMITED_RESOURCES); |
| break; |
| } |
| bt_hci_event_status(hci, HCI_SUCCESS); |
| |
| if (bt_hci_connect(hci, &PARAM(create_conn, bdaddr))) |
| bt_hci_connection_reject_event(hci, &PARAM(create_conn, bdaddr)); |
| break; |
| |
| case cmd_opcode_pack(OGF_LINK_CTL, OCF_DISCONNECT): |
| LENGTH_CHECK(disconnect); |
| |
| if (bt_hci_handle_bad(hci, PARAMHANDLE(disconnect))) { |
| bt_hci_event_status(hci, HCI_NO_CONNECTION); |
| break; |
| } |
| |
| bt_hci_event_status(hci, HCI_SUCCESS); |
| bt_hci_disconnect(hci, PARAMHANDLE(disconnect), |
| PARAM(disconnect, reason)); |
| break; |
| |
| case cmd_opcode_pack(OGF_LINK_CTL, OCF_CREATE_CONN_CANCEL): |
| LENGTH_CHECK(create_conn_cancel); |
| |
| if (bt_hci_lmp_connection_ready(hci, |
| &PARAM(create_conn_cancel, bdaddr))) { |
| for (i = 0; i < HCI_HANDLES_MAX; i ++) |
| if (bt_hci_role_master(hci, i) && hci->lm.handle[i].link && |
| !bacmp(&hci->lm.handle[i].link->slave->bd_addr, |
| &PARAM(create_conn_cancel, bdaddr))) |
| break; |
| |
| bt_hci_event_complete_conn_cancel(hci, i < HCI_HANDLES_MAX ? |
| HCI_ACL_CONNECTION_EXISTS : HCI_NO_CONNECTION, |
| &PARAM(create_conn_cancel, bdaddr)); |
| } else |
| bt_hci_event_complete_conn_cancel(hci, HCI_SUCCESS, |
| &PARAM(create_conn_cancel, bdaddr)); |
| break; |
| |
| case cmd_opcode_pack(OGF_LINK_CTL, OCF_ACCEPT_CONN_REQ): |
| LENGTH_CHECK(accept_conn_req); |
| |
| if (!hci->conn_req_host || |
| bacmp(&PARAM(accept_conn_req, bdaddr), |
| &hci->conn_req_host->bd_addr)) { |
| bt_hci_event_status(hci, HCI_INVALID_PARAMETERS); |
| break; |
| } |
| |
| bt_hci_event_status(hci, HCI_SUCCESS); |
| bt_hci_connection_accept(hci, hci->conn_req_host); |
| hci->conn_req_host = NULL; |
| break; |
| |
| case cmd_opcode_pack(OGF_LINK_CTL, OCF_REJECT_CONN_REQ): |
| LENGTH_CHECK(reject_conn_req); |
| |
| if (!hci->conn_req_host || |
| bacmp(&PARAM(reject_conn_req, bdaddr), |
| &hci->conn_req_host->bd_addr)) { |
| bt_hci_event_status(hci, HCI_INVALID_PARAMETERS); |
| break; |
| } |
| |
| bt_hci_event_status(hci, HCI_SUCCESS); |
| bt_hci_connection_reject(hci, hci->conn_req_host, |
| PARAM(reject_conn_req, reason)); |
| bt_hci_connection_reject_event(hci, &hci->conn_req_host->bd_addr); |
| hci->conn_req_host = NULL; |
| break; |
| |
| case cmd_opcode_pack(OGF_LINK_CTL, OCF_AUTH_REQUESTED): |
| LENGTH_CHECK(auth_requested); |
| |
| if (bt_hci_handle_bad(hci, PARAMHANDLE(auth_requested))) |
| bt_hci_event_status(hci, HCI_NO_CONNECTION); |
| else { |
| bt_hci_event_status(hci, HCI_SUCCESS); |
| bt_hci_event_auth_complete(hci, PARAMHANDLE(auth_requested)); |
| } |
| break; |
| |
| case cmd_opcode_pack(OGF_LINK_CTL, OCF_SET_CONN_ENCRYPT): |
| LENGTH_CHECK(set_conn_encrypt); |
| |
| if (bt_hci_handle_bad(hci, PARAMHANDLE(set_conn_encrypt))) |
| bt_hci_event_status(hci, HCI_NO_CONNECTION); |
| else { |
| bt_hci_event_status(hci, HCI_SUCCESS); |
| bt_hci_event_encrypt_change(hci, |
| PARAMHANDLE(set_conn_encrypt), |
| PARAM(set_conn_encrypt, encrypt)); |
| } |
| break; |
| |
| case cmd_opcode_pack(OGF_LINK_CTL, OCF_REMOTE_NAME_REQ): |
| LENGTH_CHECK(remote_name_req); |
| |
| if (bt_hci_name_req(hci, &PARAM(remote_name_req, bdaddr))) |
| bt_hci_event_status(hci, HCI_NO_CONNECTION); |
| break; |
| |
| case cmd_opcode_pack(OGF_LINK_CTL, OCF_REMOTE_NAME_REQ_CANCEL): |
| LENGTH_CHECK(remote_name_req_cancel); |
| |
| bt_hci_event_complete_name_cancel(hci, |
| &PARAM(remote_name_req_cancel, bdaddr)); |
| break; |
| |
| case cmd_opcode_pack(OGF_LINK_CTL, OCF_READ_REMOTE_FEATURES): |
| LENGTH_CHECK(read_remote_features); |
| |
| if (bt_hci_features_req(hci, PARAMHANDLE(read_remote_features))) |
| bt_hci_event_status(hci, HCI_NO_CONNECTION); |
| break; |
| |
| case cmd_opcode_pack(OGF_LINK_CTL, OCF_READ_REMOTE_EXT_FEATURES): |
| LENGTH_CHECK(read_remote_ext_features); |
| |
| if (bt_hci_handle_bad(hci, PARAMHANDLE(read_remote_ext_features))) |
| bt_hci_event_status(hci, HCI_NO_CONNECTION); |
| else { |
| bt_hci_event_status(hci, HCI_SUCCESS); |
| bt_hci_event_read_remote_ext_features(hci, |
| PARAMHANDLE(read_remote_ext_features)); |
| } |
| break; |
| |
| case cmd_opcode_pack(OGF_LINK_CTL, OCF_READ_REMOTE_VERSION): |
| LENGTH_CHECK(read_remote_version); |
| |
| if (bt_hci_version_req(hci, PARAMHANDLE(read_remote_version))) |
| bt_hci_event_status(hci, HCI_NO_CONNECTION); |
| break; |
| |
| case cmd_opcode_pack(OGF_LINK_CTL, OCF_READ_CLOCK_OFFSET): |
| LENGTH_CHECK(read_clock_offset); |
| |
| if (bt_hci_clkoffset_req(hci, PARAMHANDLE(read_clock_offset))) |
| bt_hci_event_status(hci, HCI_NO_CONNECTION); |
| break; |
| |
| case cmd_opcode_pack(OGF_LINK_CTL, OCF_READ_LMP_HANDLE): |
| LENGTH_CHECK(read_lmp_handle); |
| |
| /* TODO: */ |
| bt_hci_event_complete_lmp_handle(hci, PARAMHANDLE(read_lmp_handle)); |
| break; |
| |
| case cmd_opcode_pack(OGF_LINK_POLICY, OCF_HOLD_MODE): |
| LENGTH_CHECK(hold_mode); |
| |
| if (PARAM16(hold_mode, min_interval) > |
| PARAM16(hold_mode, max_interval) || |
| PARAM16(hold_mode, min_interval) < 0x0002 || |
| PARAM16(hold_mode, max_interval) > 0xff00 || |
| (PARAM16(hold_mode, min_interval) & 1) || |
| (PARAM16(hold_mode, max_interval) & 1)) { |
| bt_hci_event_status(hci, HCI_INVALID_PARAMETERS); |
| break; |
| } |
| |
| if (bt_hci_mode_change(hci, PARAMHANDLE(hold_mode), |
| PARAM16(hold_mode, max_interval), |
| acl_hold)) |
| bt_hci_event_status(hci, HCI_NO_CONNECTION); |
| break; |
| |
| case cmd_opcode_pack(OGF_LINK_POLICY, OCF_PARK_MODE): |
| LENGTH_CHECK(park_mode); |
| |
| if (PARAM16(park_mode, min_interval) > |
| PARAM16(park_mode, max_interval) || |
| PARAM16(park_mode, min_interval) < 0x000e || |
| (PARAM16(park_mode, min_interval) & 1) || |
| (PARAM16(park_mode, max_interval) & 1)) { |
| bt_hci_event_status(hci, HCI_INVALID_PARAMETERS); |
| break; |
| } |
| |
| if (bt_hci_mode_change(hci, PARAMHANDLE(park_mode), |
| PARAM16(park_mode, max_interval), |
| acl_parked)) |
| bt_hci_event_status(hci, HCI_NO_CONNECTION); |
| break; |
| |
| case cmd_opcode_pack(OGF_LINK_POLICY, OCF_EXIT_PARK_MODE): |
| LENGTH_CHECK(exit_park_mode); |
| |
| if (bt_hci_mode_cancel(hci, PARAMHANDLE(exit_park_mode), |
| acl_parked)) |
| bt_hci_event_status(hci, HCI_NO_CONNECTION); |
| break; |
| |
| case cmd_opcode_pack(OGF_LINK_POLICY, OCF_ROLE_DISCOVERY): |
| LENGTH_CHECK(role_discovery); |
| |
| if (bt_hci_handle_bad(hci, PARAMHANDLE(role_discovery))) |
| bt_hci_event_complete_role_discovery(hci, |
| HCI_NO_CONNECTION, PARAMHANDLE(role_discovery), 0); |
| else |
| bt_hci_event_complete_role_discovery(hci, |
| HCI_SUCCESS, PARAMHANDLE(role_discovery), |
| bt_hci_role_master(hci, |
| PARAMHANDLE(role_discovery))); |
| break; |
| |
| case cmd_opcode_pack(OGF_HOST_CTL, OCF_SET_EVENT_MASK): |
| LENGTH_CHECK(set_event_mask); |
| |
| memcpy(hci->event_mask, PARAM(set_event_mask, mask), 8); |
| bt_hci_event_complete_status(hci, HCI_SUCCESS); |
| break; |
| |
| case cmd_opcode_pack(OGF_HOST_CTL, OCF_RESET): |
| bt_hci_reset(hci); |
| bt_hci_event_status(hci, HCI_SUCCESS); |
| break; |
| |
| case cmd_opcode_pack(OGF_HOST_CTL, OCF_SET_EVENT_FLT): |
| if (length >= 1 && PARAM(set_event_flt, flt_type) == FLT_CLEAR_ALL) |
| /* No length check */; |
| else |
| LENGTH_CHECK(set_event_flt); |
| |
| /* Filters are not implemented */ |
| bt_hci_event_complete_status(hci, HCI_SUCCESS); |
| break; |
| |
| case cmd_opcode_pack(OGF_HOST_CTL, OCF_FLUSH): |
| LENGTH_CHECK(flush); |
| |
| if (bt_hci_handle_bad(hci, PARAMHANDLE(flush))) |
| bt_hci_event_complete_flush(hci, |
| HCI_NO_CONNECTION, PARAMHANDLE(flush)); |
| else { |
| /* TODO: ordering? */ |
| bt_hci_event(hci, EVT_FLUSH_OCCURRED, |
| &PARAM(flush, handle), |
| EVT_FLUSH_OCCURRED_SIZE); |
| bt_hci_event_complete_flush(hci, |
| HCI_SUCCESS, PARAMHANDLE(flush)); |
| } |
| break; |
| |
| case cmd_opcode_pack(OGF_HOST_CTL, OCF_CHANGE_LOCAL_NAME): |
| LENGTH_CHECK(change_local_name); |
| |
| if (hci->device.lmp_name) |
| g_free((void *) hci->device.lmp_name); |
| hci->device.lmp_name = g_strndup(PARAM(change_local_name, name), |
| sizeof(PARAM(change_local_name, name))); |
| bt_hci_event_complete_status(hci, HCI_SUCCESS); |
| break; |
| |
| case cmd_opcode_pack(OGF_HOST_CTL, OCF_READ_LOCAL_NAME): |
| bt_hci_event_complete_read_local_name(hci); |
| break; |
| |
| case cmd_opcode_pack(OGF_HOST_CTL, OCF_READ_CONN_ACCEPT_TIMEOUT): |
| bt_hci_event_complete_read_conn_accept_timeout(hci); |
| break; |
| |
| case cmd_opcode_pack(OGF_HOST_CTL, OCF_WRITE_CONN_ACCEPT_TIMEOUT): |
| /* TODO */ |
| LENGTH_CHECK(write_conn_accept_timeout); |
| |
| if (PARAM16(write_conn_accept_timeout, timeout) < 0x0001 || |
| PARAM16(write_conn_accept_timeout, timeout) > 0xb540) { |
| bt_hci_event_complete_status(hci, HCI_INVALID_PARAMETERS); |
| break; |
| } |
| |
| hci->conn_accept_tout = PARAM16(write_conn_accept_timeout, timeout); |
| bt_hci_event_complete_status(hci, HCI_SUCCESS); |
| break; |
| |
| case cmd_opcode_pack(OGF_HOST_CTL, OCF_READ_SCAN_ENABLE): |
| bt_hci_event_complete_read_scan_enable(hci); |
| break; |
| |
| case cmd_opcode_pack(OGF_HOST_CTL, OCF_WRITE_SCAN_ENABLE): |
| LENGTH_CHECK(write_scan_enable); |
| |
| /* TODO: check that the remaining bits are all 0 */ |
| hci->device.inquiry_scan = |
| !!(PARAM(write_scan_enable, scan_enable) & SCAN_INQUIRY); |
| hci->device.page_scan = |
| !!(PARAM(write_scan_enable, scan_enable) & SCAN_PAGE); |
| bt_hci_event_complete_status(hci, HCI_SUCCESS); |
| break; |
| |
| case cmd_opcode_pack(OGF_HOST_CTL, OCF_READ_CLASS_OF_DEV): |
| bt_hci_event_complete_read_local_class(hci); |
| break; |
| |
| case cmd_opcode_pack(OGF_HOST_CTL, OCF_WRITE_CLASS_OF_DEV): |
| LENGTH_CHECK(write_class_of_dev); |
| |
| memcpy(hci->device.class, PARAM(write_class_of_dev, dev_class), |
| sizeof(PARAM(write_class_of_dev, dev_class))); |
| bt_hci_event_complete_status(hci, HCI_SUCCESS); |
| break; |
| |
| case cmd_opcode_pack(OGF_HOST_CTL, OCF_READ_VOICE_SETTING): |
| bt_hci_event_complete_voice_setting(hci); |
| break; |
| |
| case cmd_opcode_pack(OGF_HOST_CTL, OCF_WRITE_VOICE_SETTING): |
| LENGTH_CHECK(write_voice_setting); |
| |
| hci->voice_setting = PARAM(write_voice_setting, voice_setting); |
| bt_hci_event_complete_status(hci, HCI_SUCCESS); |
| break; |
| |
| case cmd_opcode_pack(OGF_HOST_CTL, OCF_HOST_NUMBER_OF_COMPLETED_PACKETS): |
| if (length < data[0] * 2 + 1) |
| goto short_hci; |
| |
| for (i = 0; i < data[0]; i ++) |
| if (bt_hci_handle_bad(hci, |
| data[i * 2 + 1] | (data[i * 2 + 2] << 8))) |
| bt_hci_event_complete_status(hci, HCI_INVALID_PARAMETERS); |
| break; |
| |
| case cmd_opcode_pack(OGF_HOST_CTL, OCF_READ_INQUIRY_MODE): |
| /* Only if (local_features[3] & 0x40) && (local_commands[12] & 0x40) |
| * else |
| * goto unknown_command */ |
| bt_hci_event_complete_read_inquiry_mode(hci); |
| break; |
| |
| case cmd_opcode_pack(OGF_HOST_CTL, OCF_WRITE_INQUIRY_MODE): |
| /* Only if (local_features[3] & 0x40) && (local_commands[12] & 0x80) |
| * else |
| * goto unknown_command */ |
| LENGTH_CHECK(write_inquiry_mode); |
| |
| if (PARAM(write_inquiry_mode, mode) > 0x01) { |
| bt_hci_event_complete_status(hci, HCI_INVALID_PARAMETERS); |
| break; |
| } |
| |
| hci->lm.inquiry_mode = PARAM(write_inquiry_mode, mode); |
| bt_hci_event_complete_status(hci, HCI_SUCCESS); |
| break; |
| |
| case cmd_opcode_pack(OGF_INFO_PARAM, OCF_READ_LOCAL_VERSION): |
| bt_hci_read_local_version_rp(hci); |
| break; |
| |
| case cmd_opcode_pack(OGF_INFO_PARAM, OCF_READ_LOCAL_COMMANDS): |
| bt_hci_read_local_commands_rp(hci); |
| break; |
| |
| case cmd_opcode_pack(OGF_INFO_PARAM, OCF_READ_LOCAL_FEATURES): |
| bt_hci_read_local_features_rp(hci); |
| break; |
| |
| case cmd_opcode_pack(OGF_INFO_PARAM, OCF_READ_LOCAL_EXT_FEATURES): |
| LENGTH_CHECK(read_local_ext_features); |
| |
| bt_hci_read_local_ext_features_rp(hci, |
| PARAM(read_local_ext_features, page_num)); |
| break; |
| |
| case cmd_opcode_pack(OGF_INFO_PARAM, OCF_READ_BUFFER_SIZE): |
| bt_hci_read_buffer_size_rp(hci); |
| break; |
| |
| case cmd_opcode_pack(OGF_INFO_PARAM, OCF_READ_COUNTRY_CODE): |
| bt_hci_read_country_code_rp(hci); |
| break; |
| |
| case cmd_opcode_pack(OGF_INFO_PARAM, OCF_READ_BD_ADDR): |
| bt_hci_read_bd_addr_rp(hci); |
| break; |
| |
| case cmd_opcode_pack(OGF_STATUS_PARAM, OCF_READ_LINK_QUALITY): |
| LENGTH_CHECK(read_link_quality); |
| |
| bt_hci_link_quality_rp(hci, PARAMHANDLE(read_link_quality)); |
| break; |
| |
| default: |
| bt_hci_event_status(hci, HCI_UNKNOWN_COMMAND); |
| break; |
| |
| short_hci: |
| fprintf(stderr, "%s: HCI packet too short (%iB)\n", |
| __FUNCTION__, length); |
| bt_hci_event_status(hci, HCI_INVALID_PARAMETERS); |
| break; |
| } |
| } |
| |
| /* We could perform fragmentation here, we can't do "recombination" because |
| * at this layer the length of the payload is not know ahead, so we only |
| * know that a packet contained the last fragment of the SDU when the next |
| * SDU starts. */ |
| static inline void bt_hci_lmp_acl_data(struct bt_hci_s *hci, uint16_t handle, |
| const uint8_t *data, int start, int len) |
| { |
| struct hci_acl_hdr *pkt = (void *) hci->acl_buf; |
| |
| /* TODO: packet flags */ |
| /* TODO: avoid memcpy'ing */ |
| |
| if (len + HCI_ACL_HDR_SIZE > sizeof(hci->acl_buf)) { |
| fprintf(stderr, "%s: can't take ACL packets %i bytes long\n", |
| __FUNCTION__, len); |
| return; |
| } |
| memcpy(hci->acl_buf + HCI_ACL_HDR_SIZE, data, len); |
| |
| pkt->handle = cpu_to_le16( |
| acl_handle_pack(handle, start ? ACL_START : ACL_CONT)); |
| pkt->dlen = cpu_to_le16(len); |
| hci->info.acl_recv(hci->info.opaque, |
| hci->acl_buf, len + HCI_ACL_HDR_SIZE); |
| } |
| |
| static void bt_hci_lmp_acl_data_slave(struct bt_link_s *btlink, |
| const uint8_t *data, int start, int len) |
| { |
| struct bt_hci_link_s *link = (struct bt_hci_link_s *) btlink; |
| |
| bt_hci_lmp_acl_data(hci_from_device(btlink->slave), |
| link->handle, data, start, len); |
| } |
| |
| static void bt_hci_lmp_acl_data_host(struct bt_link_s *link, |
| const uint8_t *data, int start, int len) |
| { |
| bt_hci_lmp_acl_data(hci_from_device(link->host), |
| link->handle, data, start, len); |
| } |
| |
| static void bt_submit_acl(struct HCIInfo *info, |
| const uint8_t *data, int length) |
| { |
| struct bt_hci_s *hci = hci_from_info(info); |
| uint16_t handle; |
| int datalen, flags; |
| struct bt_link_s *link; |
| |
| if (length < HCI_ACL_HDR_SIZE) { |
| fprintf(stderr, "%s: ACL packet too short (%iB)\n", |
| __FUNCTION__, length); |
| return; |
| } |
| |
| handle = acl_handle((data[1] << 8) | data[0]); |
| flags = acl_flags((data[1] << 8) | data[0]); |
| datalen = (data[3] << 8) | data[2]; |
| data += HCI_ACL_HDR_SIZE; |
| length -= HCI_ACL_HDR_SIZE; |
| |
| if (bt_hci_handle_bad(hci, handle)) { |
| fprintf(stderr, "%s: invalid ACL handle %03x\n", |
| __FUNCTION__, handle); |
| /* TODO: signal an error */ |
| return; |
| } |
| handle &= ~HCI_HANDLE_OFFSET; |
| |
| if (datalen > length) { |
| fprintf(stderr, "%s: ACL packet too short (%iB < %iB)\n", |
| __FUNCTION__, length, datalen); |
| return; |
| } |
| |
| link = hci->lm.handle[handle].link; |
| |
| if ((flags & ~3) == ACL_ACTIVE_BCAST) { |
| if (!hci->asb_handle) |
| hci->asb_handle = handle; |
| else if (handle != hci->asb_handle) { |
| fprintf(stderr, "%s: Bad handle %03x in Active Slave Broadcast\n", |
| __FUNCTION__, handle); |
| /* TODO: signal an error */ |
| return; |
| } |
| |
| /* TODO */ |
| } |
| |
| if ((flags & ~3) == ACL_PICO_BCAST) { |
| if (!hci->psb_handle) |
| hci->psb_handle = handle; |
| else if (handle != hci->psb_handle) { |
| fprintf(stderr, "%s: Bad handle %03x in Parked Slave Broadcast\n", |
| __FUNCTION__, handle); |
| /* TODO: signal an error */ |
| return; |
| } |
| |
| /* TODO */ |
| } |
| |
| /* TODO: increase counter and send EVT_NUM_COMP_PKTS */ |
| bt_hci_event_num_comp_pkts(hci, handle | HCI_HANDLE_OFFSET, 1); |
| |
| /* Do this last as it can trigger further events even in this HCI */ |
| hci->lm.handle[handle].lmp_acl_data(link, data, |
| (flags & 3) == ACL_START, length); |
| } |
| |
| static void bt_submit_sco(struct HCIInfo *info, |
| const uint8_t *data, int length) |
| { |
| struct bt_hci_s *hci = hci_from_info(info); |
| uint16_t handle; |
| int datalen; |
| |
| if (length < 3) |
| return; |
| |
| handle = acl_handle((data[1] << 8) | data[0]); |
| datalen = data[2]; |
| length -= 3; |
| |
| if (bt_hci_handle_bad(hci, handle)) { |
| fprintf(stderr, "%s: invalid SCO handle %03x\n", |
| __FUNCTION__, handle); |
| return; |
| } |
| |
| if (datalen > length) { |
| fprintf(stderr, "%s: SCO packet too short (%iB < %iB)\n", |
| __FUNCTION__, length, datalen); |
| return; |
| } |
| |
| /* TODO */ |
| |
| /* TODO: increase counter and send EVT_NUM_COMP_PKTS if synchronous |
| * Flow Control is enabled. |
| * (See Read/Write_Synchronous_Flow_Control_Enable on page 513 and |
| * page 514.) */ |
| } |
| |
| static uint8_t *bt_hci_evt_packet(void *opaque) |
| { |
| /* TODO: allocate a packet from upper layer */ |
| struct bt_hci_s *s = opaque; |
| |
| return s->evt_buf; |
| } |
| |
| static void bt_hci_evt_submit(void *opaque, int len) |
| { |
| /* TODO: notify upper layer */ |
| struct bt_hci_s *s = opaque; |
| |
| s->info.evt_recv(s->info.opaque, s->evt_buf, len); |
| } |
| |
| static int bt_hci_bdaddr_set(struct HCIInfo *info, const uint8_t *bd_addr) |
| { |
| struct bt_hci_s *hci = hci_from_info(info); |
| |
| bacpy(&hci->device.bd_addr, (const bdaddr_t *) bd_addr); |
| return 0; |
| } |
| |
| static void bt_hci_done(struct HCIInfo *info); |
| static void bt_hci_destroy(struct bt_device_s *dev) |
| { |
| struct bt_hci_s *hci = hci_from_device(dev); |
| |
| bt_hci_done(&hci->info); |
| } |
| |
| struct HCIInfo *bt_new_hci(struct bt_scatternet_s *net) |
| { |
| struct bt_hci_s *s = g_malloc0(sizeof(struct bt_hci_s)); |
| |
| s->lm.inquiry_done = timer_new(QEMU_CLOCK_VIRTUAL, SCALE_NS, bt_hci_inquiry_done, s); |
| s->lm.inquiry_next = timer_new(QEMU_CLOCK_VIRTUAL, SCALE_NS, bt_hci_inquiry_next, s); |
| s->conn_accept_timer = |
| timer_new(QEMU_CLOCK_VIRTUAL, SCALE_NS, bt_hci_conn_accept_timeout, s); |
| |
| s->evt_packet = bt_hci_evt_packet; |
| s->evt_submit = bt_hci_evt_submit; |
| s->opaque = s; |
| |
| bt_device_init(&s->device, net); |
| s->device.lmp_connection_request = bt_hci_lmp_connection_request; |
| s->device.lmp_connection_complete = bt_hci_lmp_connection_complete; |
| s->device.lmp_disconnect_master = bt_hci_lmp_disconnect_host; |
| s->device.lmp_disconnect_slave = bt_hci_lmp_disconnect_slave; |
| s->device.lmp_acl_data = bt_hci_lmp_acl_data_slave; |
| s->device.lmp_acl_resp = bt_hci_lmp_acl_data_host; |
| s->device.lmp_mode_change = bt_hci_lmp_mode_change_slave; |
| |
| /* Keep updated! */ |
| /* Also keep in sync with supported commands bitmask in |
| * bt_hci_read_local_commands_rp */ |
| s->device.lmp_caps = 0x8000199b7e85355fll; |
| |
| bt_hci_reset(s); |
| |
| s->info.cmd_send = bt_submit_hci; |
| s->info.sco_send = bt_submit_sco; |
| s->info.acl_send = bt_submit_acl; |
| s->info.bdaddr_set = bt_hci_bdaddr_set; |
| |
| s->device.handle_destroy = bt_hci_destroy; |
| |
| return &s->info; |
| } |
| |
| static void bt_hci_done(struct HCIInfo *info) |
| { |
| struct bt_hci_s *hci = hci_from_info(info); |
| int handle; |
| |
| bt_device_done(&hci->device); |
| |
| if (hci->device.lmp_name) |
| g_free((void *) hci->device.lmp_name); |
| |
| /* Be gentle and send DISCONNECT to all connected peers and those |
| * currently waiting for us to accept or reject a connection request. |
| * This frees the links. */ |
| if (hci->conn_req_host) { |
| bt_hci_connection_reject(hci, |
| hci->conn_req_host, HCI_OE_POWER_OFF); |
| return; |
| } |
| |
| for (handle = HCI_HANDLE_OFFSET; |
| handle < (HCI_HANDLE_OFFSET | HCI_HANDLES_MAX); handle ++) |
| if (!bt_hci_handle_bad(hci, handle)) |
| bt_hci_disconnect(hci, handle, HCI_OE_POWER_OFF); |
| |
| /* TODO: this is not enough actually, there may be slaves from whom |
| * we have requested a connection who will soon (or not) respond with |
| * an accept or a reject, so we should also check if hci->lm.connecting |
| * is non-zero and if so, avoid freeing the hci but otherwise disappear |
| * from all qemu social life (e.g. stop scanning and request to be |
| * removed from s->device.net) and arrange for |
| * s->device.lmp_connection_complete to free the remaining bits once |
| * hci->lm.awaiting_bdaddr[] is empty. */ |
| |
| timer_free(hci->lm.inquiry_done); |
| timer_free(hci->lm.inquiry_next); |
| timer_free(hci->conn_accept_timer); |
| |
| g_free(hci); |
| } |