blob: 63dff87ce6f9295d6134d8da896a95c0bbc2ada3 [file] [log] [blame]
/*
SDL - Simple DirectMedia Layer
Copyright (C) 1997-2012 Sam Lantinga
This library is free software; you can redistribute it and/or
modify it under the terms of the GNU Lesser General Public
License as published by the Free Software Foundation; either
version 2.1 of the License, or (at your option) any later version.
This library is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
Lesser General Public License for more details.
You should have received a copy of the GNU Lesser General Public
License along with this library; if not, write to the Free Software
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
Sam Lantinga
slouken@libsdl.org
*/
#include "SDL_config.h"
#include <unistd.h>
#include <sys/time.h>
#include <ctype.h>
#include "SDL_stdinc.h"
#include "SDL_fbvideo.h"
#include "SDL_fbelo.h"
/*
calibration default values
values are read from the following environment variables:
SDL_ELO_MIN_X
SDL_ELO_MAX_X
SDL_ELO_MIN_Y
SDL_ELO_MAX_Y
*/
static int ELO_MIN_X = 400;
static int ELO_MAX_X = 3670;
static int ELO_MIN_Y = 500;
static int ELO_MAX_Y = 3540;
#define ELO_SNAP_SIZE 6
#define ELO_TOUCH_BYTE 'T'
#define ELO_ID 'I'
#define ELO_MODE 'M'
#define ELO_PARAMETER 'P'
#define ELO_REPORT 'B'
#define ELO_ACK 'A'
#define ELO_INIT_CHECKSUM 0xAA
#define ELO_BTN_PRESS 0x01
#define ELO_STREAM 0x02
#define ELO_BTN_RELEASE 0x04
#define ELO_TOUCH_MODE 0x01
#define ELO_STREAM_MODE 0x02
#define ELO_UNTOUCH_MODE 0x04
#define ELO_RANGE_CHECK_MODE 0x40
#define ELO_TRIM_MODE 0x02
#define ELO_CALIB_MODE 0x04
#define ELO_SCALING_MODE 0x08
#define ELO_TRACKING_MODE 0x40
#define ELO_SERIAL_MASK 0xF8
#define ELO_SERIAL_IO '0'
#define ELO_MAX_TRIALS 3
#define ELO_MAX_WAIT 100000
#define ELO_UNTOUCH_DELAY 5
#define ELO_REPORT_DELAY 1
/* eloParsePacket
*/
int eloParsePacket(unsigned char* mousebuf, int* dx, int* dy, int* button_state) {
static int elo_button = 0;
static int last_x = 0;
static int last_y = 0;
int x,y;
/* Check if we have a touch packet */
if (mousebuf[1] != ELO_TOUCH_BYTE) {
return 0;
}
x = ((mousebuf[4] << 8) | mousebuf[3]);
y = ((mousebuf[6] << 8) | mousebuf[5]);
if((SDL_abs(x - last_x) > ELO_SNAP_SIZE) || (SDL_abs(y - last_y) > ELO_SNAP_SIZE)) {
*dx = ((mousebuf[4] << 8) | mousebuf[3]);
*dy = ((mousebuf[6] << 8) | mousebuf[5]);
}
else {
*dx = last_x;
*dy = last_y;
}
last_x = *dx;
last_y = *dy;
if ( (mousebuf[2] & 0x07) == ELO_BTN_PRESS ) {
elo_button = 1;
}
if ( (mousebuf[2] & 0x07) == ELO_BTN_RELEASE ) {
elo_button = 0;
}
*button_state = elo_button;
return 1;
}
/* Convert the raw coordinates from the ELO controller
to a screen position.
*/
void eloConvertXY(_THIS, int *dx, int *dy) {
int input_x = *dx;
int input_y = *dy;
int width = ELO_MAX_X - ELO_MIN_X;
int height = ELO_MAX_Y - ELO_MIN_Y;
*dx = ((int)cache_vinfo.xres - ((int)cache_vinfo.xres * (input_x - ELO_MIN_X)) / width);
*dy = (cache_vinfo.yres * (input_y - ELO_MIN_Y)) / height;
}
/* eloGetPacket
*/
int eloGetPacket(unsigned char* buffer, int* buffer_p, int* checksum, int fd) {
int num_bytes;
int ok;
if(fd == 0) {
num_bytes = ELO_PACKET_SIZE;
}
else {
num_bytes = read(fd,
(char *) (buffer + *buffer_p),
ELO_PACKET_SIZE - *buffer_p);
}
if (num_bytes < 0) {
#ifdef DEBUG_MOUSE
fprintf(stderr, "System error while reading from Elographics touchscreen.\n");
#endif
return 0;
}
while (num_bytes) {
if ((*buffer_p == 0) && (buffer[0] != ELO_START_BYTE)) {
SDL_memcpy(&buffer[0], &buffer[1], num_bytes-1);
}
else {
if (*buffer_p < ELO_PACKET_SIZE-1) {
*checksum = *checksum + buffer[*buffer_p];
*checksum = *checksum % 256;
}
(*buffer_p)++;
}
num_bytes--;
}
if (*buffer_p == ELO_PACKET_SIZE) {
ok = (*checksum == buffer[ELO_PACKET_SIZE-1]);
*checksum = ELO_INIT_CHECKSUM;
*buffer_p = 0;
if (!ok) {
return 0;
}
return 1;
}
else {
return 0;
}
}
/* eloSendPacket
*/
int eloSendPacket(unsigned char* packet, int fd)
{
int i, result;
int sum = ELO_INIT_CHECKSUM;
packet[0] = ELO_START_BYTE;
for (i = 0; i < ELO_PACKET_SIZE-1; i++) {
sum += packet[i];
sum &= 0xFF;
}
packet[ELO_PACKET_SIZE-1] = sum;
result = write(fd, packet, ELO_PACKET_SIZE);
if (result != ELO_PACKET_SIZE) {
#ifdef DEBUG_MOUSE
printf("System error while sending to Elographics touchscreen.\n");
#endif
return 0;
}
else {
return 1;
}
}
/* eloWaitForInput
*/
int eloWaitForInput(int fd, int timeout)
{
fd_set readfds;
struct timeval to;
int r;
FD_ZERO(&readfds);
FD_SET(fd, &readfds);
to.tv_sec = 0;
to.tv_usec = timeout;
r = select(FD_SETSIZE, &readfds, NULL, NULL, &to);
return r;
}
/* eloWaitReply
*/
int eloWaitReply(unsigned char type, unsigned char *reply, int fd) {
int ok;
int i, result;
int reply_p = 0;
int sum = ELO_INIT_CHECKSUM;
i = ELO_MAX_TRIALS;
do {
ok = 0;
result = eloWaitForInput(fd, ELO_MAX_WAIT);
if (result > 0) {
ok = eloGetPacket(reply, &reply_p, &sum, fd);
if (ok && reply[1] != type && type != ELO_PARAMETER) {
#ifdef DEBUG_MOUSE
fprintf(stderr, "Wrong reply received\n");
#endif
ok = 0;
}
}
else {
#ifdef DEBUG_MOUSE
fprintf(stderr, "No input!\n");
#endif
}
if (result == 0) {
i--;
}
} while(!ok && (i>0));
return ok;
}
/* eloWaitAck
*/
int eloWaitAck(int fd) {
unsigned char packet[ELO_PACKET_SIZE];
int i, nb_errors;
if (eloWaitReply(ELO_ACK, packet, fd)) {
for (i = 0, nb_errors = 0; i < 4; i++) {
if (packet[2 + i] != '0') {
nb_errors++;
}
}
if (nb_errors != 0) {
#ifdef DEBUG_MOUSE
fprintf(stderr, "Elographics acknowledge packet reports %d errors\n", nb_errors);
#endif
}
return 1;
}
else {
return 0;
}
}
/* eloSendQuery --
*/
int eloSendQuery(unsigned char *request, unsigned char* reply, int fd) {
int ok;
if (eloSendPacket(request, fd)) {
ok = eloWaitReply(toupper(request[1]), reply, fd);
if (ok) {
ok = eloWaitAck(fd);
}
return ok;
}
else {
return 0;
}
}
/* eloSendControl
*/
int eloSendControl(unsigned char* control, int fd) {
if (eloSendPacket(control, fd)) {
return eloWaitAck(fd);
}
else {
return 0;
}
}
/* eloInitController
*/
int eloInitController(int fd) {
unsigned char req[ELO_PACKET_SIZE];
unsigned char reply[ELO_PACKET_SIZE];
const char *buffer = NULL;
int result = 0;
struct termios mouse_termios;
/* try to read the calibration values */
buffer = SDL_getenv("SDL_ELO_MIN_X");
if(buffer) {
ELO_MIN_X = SDL_atoi(buffer);
}
buffer = SDL_getenv("SDL_ELO_MAX_X");
if(buffer) {
ELO_MAX_X = SDL_atoi(buffer);
}
buffer = SDL_getenv("SDL_ELO_MIN_Y");
if(buffer) {
ELO_MIN_Y = SDL_atoi(buffer);
}
buffer = SDL_getenv("SDL_ELO_MAX_Y");
if(buffer) {
ELO_MAX_Y = SDL_atoi(buffer);
}
#ifdef DEBUG_MOUSE
fprintf( stderr, "ELO calibration values:\nmin_x: %i\nmax_x: %i\nmin_y: %i\nmax_y: %i\n",
ELO_MIN_X,
ELO_MAX_X,
ELO_MIN_Y,
ELO_MAX_Y);
#endif
/* set comm params */
SDL_memset(&mouse_termios, 0, sizeof(mouse_termios));
mouse_termios.c_cflag = B9600 | CS8 | CREAD | CLOCAL;
mouse_termios.c_cc[VMIN] = 1;
result = tcsetattr(fd, TCSANOW, &mouse_termios);
if (result < 0) {
#ifdef DEBUG_MOUSE
fprintf( stderr, "Unable to configure Elographics touchscreen port\n");
#endif
return 0;
}
SDL_memset(req, 0, ELO_PACKET_SIZE);
req[1] = tolower(ELO_PARAMETER);
if (!eloSendQuery(req, reply, fd)) {
#ifdef DEBUG_MOUSE
fprintf( stderr, "Not at the specified rate or model 2310, will continue\n");
#endif
}
SDL_memset(req, 0, ELO_PACKET_SIZE);
req[1] = tolower(ELO_ID);
if (eloSendQuery(req, reply, fd)) {
#ifdef DEBUG_MOUSE
fprintf(stderr, "Ok, controller configured!\n");
#endif
}
else {
#ifdef DEBUG_MOUSE
fprintf( stderr, "Unable to ask Elographics touchscreen identification\n");
#endif
return 0;
}
SDL_memset(req, 0, ELO_PACKET_SIZE);
req[1] = ELO_MODE;
req[3] = ELO_TOUCH_MODE | ELO_STREAM_MODE | ELO_UNTOUCH_MODE;
req[4] = ELO_TRACKING_MODE;
if (!eloSendControl(req, fd)) {
#ifdef DEBUG_MOUSE
fprintf( stderr, "Unable to change Elographics touchscreen operating mode\n");
#endif
return 0;
}
SDL_memset(req, 0, ELO_PACKET_SIZE);
req[1] = ELO_REPORT;
req[2] = ELO_UNTOUCH_DELAY;
req[3] = ELO_REPORT_DELAY;
if (!eloSendControl(req, fd)) {
#ifdef DEBUG_MOUSE
fprintf( stderr, "Unable to change Elographics touchscreen reports timings\n");
#endif
return 0;
}
return 1;
}
int eloReadPosition(_THIS, int fd, int* x, int* y, int* button_state, int* realx, int* realy) {
unsigned char buffer[ELO_PACKET_SIZE];
int pointer = 0;
int checksum = ELO_INIT_CHECKSUM;
while(pointer < ELO_PACKET_SIZE) {
if(eloGetPacket(buffer, &pointer, &checksum, fd)) {
break;
}
}
if(!eloParsePacket(buffer, realx, realy, button_state)) {
return 0;
}
*x = *realx;
*y = *realy;
eloConvertXY(this, x, y);
return 1;
}