| /* |
| SDL - Simple DirectMedia Layer |
| Copyright (C) 1997-2012 Sam Lantinga |
| |
| This library is free software; you can redistribute it and/or |
| modify it under the terms of the GNU Lesser General Public |
| License as published by the Free Software Foundation; either |
| version 2.1 of the License, or (at your option) any later version. |
| |
| This library is distributed in the hope that it will be useful, |
| but WITHOUT ANY WARRANTY; without even the implied warranty of |
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| Lesser General Public License for more details. |
| |
| You should have received a copy of the GNU Lesser General Public |
| License along with this library; if not, write to the Free Software |
| Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA |
| |
| Sam Lantinga |
| slouken@libsdl.org |
| */ |
| #include "SDL_config.h" |
| |
| #include "SDL_video.h" |
| #include "../SDL_blit.h" |
| #include "SDL_fbmatrox.h" |
| #include "matrox_mmio.h" |
| |
| |
| /* Wait for vertical retrace - taken from the XFree86 Matrox driver */ |
| static void WaitVBL(_THIS) |
| { |
| int count; |
| |
| /* find start of retrace */ |
| mga_waitidle(); |
| while ( (mga_in8(0x1FDA) & 0x08) ) |
| ; |
| while ( !(mga_in8(0x1FDA) & 0x08) ) |
| ; |
| /* wait until we're past the start */ |
| count = mga_in32(0x1E20) + 2; |
| while ( mga_in32(0x1E20) < count ) |
| ; |
| } |
| static void WaitIdle(_THIS) |
| { |
| mga_waitidle(); |
| } |
| |
| /* Sets video mem colorkey and accelerated blit function */ |
| static int SetHWColorKey(_THIS, SDL_Surface *surface, Uint32 key) |
| { |
| return(0); |
| } |
| |
| /* Sets per surface hardware alpha value */ |
| #if 0 |
| static int SetHWAlpha(_THIS, SDL_Surface *surface, Uint8 value) |
| { |
| return(0); |
| } |
| #endif |
| |
| static int FillHWRect(_THIS, SDL_Surface *dst, SDL_Rect *rect, Uint32 color) |
| { |
| int dstX, dstY; |
| Uint32 fxbndry; |
| Uint32 ydstlen; |
| Uint32 fillop; |
| |
| /* Don't blit to the display surface when switched away */ |
| if ( switched_away ) { |
| return -2; /* no hardware access */ |
| } |
| if ( dst == this->screen ) { |
| SDL_mutexP(hw_lock); |
| } |
| |
| switch (dst->format->BytesPerPixel) { |
| case 1: |
| color |= (color<<8); |
| case 2: |
| color |= (color<<16); |
| break; |
| } |
| |
| /* Set up the X/Y base coordinates */ |
| FB_dst_to_xy(this, dst, &dstX, &dstY); |
| |
| /* Adjust for the current rectangle */ |
| dstX += rect->x; |
| dstY += rect->y; |
| |
| /* Set up the X boundaries */ |
| fxbndry = (dstX | ((dstX+rect->w) << 16)); |
| |
| /* Set up the Y boundaries */ |
| ydstlen = (rect->h | (dstY << 16)); |
| |
| /* Set up for color fill operation */ |
| fillop = MGADWG_TRAP | MGADWG_SOLID | |
| MGADWG_ARZERO | MGADWG_SGNZERO | MGADWG_SHIFTZERO; |
| |
| /* Execute the operations! */ |
| mga_wait(5); |
| mga_out32(MGAREG_DWGCTL, fillop | MGADWG_REPLACE); |
| mga_out32(MGAREG_FCOL, color); |
| mga_out32(MGAREG_FXBNDRY, fxbndry); |
| mga_out32(MGAREG_YDSTLEN + MGAREG_EXEC, ydstlen); |
| |
| FB_AddBusySurface(dst); |
| |
| if ( dst == this->screen ) { |
| SDL_mutexV(hw_lock); |
| } |
| return(0); |
| } |
| |
| static int HWAccelBlit(SDL_Surface *src, SDL_Rect *srcrect, |
| SDL_Surface *dst, SDL_Rect *dstrect) |
| { |
| SDL_VideoDevice *this = current_video; |
| int pitch, w, h; |
| int srcX, srcY; |
| int dstX, dstY; |
| Uint32 sign; |
| Uint32 start, stop; |
| int skip; |
| Uint32 blitop; |
| |
| /* FIXME: For now, only blit to display surface */ |
| if ( dst->pitch != SDL_VideoSurface->pitch ) { |
| return(src->map->sw_blit(src, srcrect, dst, dstrect)); |
| } |
| |
| /* Don't blit to the display surface when switched away */ |
| if ( switched_away ) { |
| return -2; /* no hardware access */ |
| } |
| if ( dst == this->screen ) { |
| SDL_mutexP(hw_lock); |
| } |
| |
| /* Calculate source and destination base coordinates (in pixels) */ |
| w = dstrect->w; |
| h = dstrect->h; |
| FB_dst_to_xy(this, src, &srcX, &srcY); |
| FB_dst_to_xy(this, dst, &dstX, &dstY); |
| |
| /* Adjust for the current blit rectangles */ |
| srcX += srcrect->x; |
| srcY += srcrect->y; |
| dstX += dstrect->x; |
| dstY += dstrect->y; |
| pitch = dst->pitch/dst->format->BytesPerPixel; |
| |
| /* Set up the blit direction (sign) flags */ |
| sign = 0; |
| if ( srcX < dstX ) { |
| sign |= 1; |
| } |
| if ( srcY < dstY ) { |
| sign |= 4; |
| srcY += (h - 1); |
| dstY += (h - 1); |
| } |
| |
| /* Set up the blit source row start, end, and skip (in pixels) */ |
| stop = start = (srcY * pitch) + srcX; |
| if ( srcX < dstX ) { |
| start += (w - 1); |
| } else { |
| stop += (w - 1); |
| } |
| if ( srcY < dstY ) { |
| skip = -pitch; |
| } else { |
| skip = pitch; |
| } |
| |
| /* Set up the blit operation */ |
| if ( (src->flags & SDL_SRCCOLORKEY) == SDL_SRCCOLORKEY ) { |
| Uint32 colorkey; |
| |
| blitop = MGADWG_BFCOL | MGADWG_BITBLT | |
| MGADWG_SHIFTZERO | MGADWG_RSTR | (0x0C << 16) | |
| MGADWG_TRANSC; |
| |
| colorkey = src->format->colorkey; |
| switch (dst->format->BytesPerPixel) { |
| case 1: |
| colorkey |= (colorkey<<8); |
| case 2: |
| colorkey |= (colorkey<<16); |
| break; |
| } |
| mga_wait(2); |
| mga_out32(MGAREG_FCOL, colorkey); |
| mga_out32(MGAREG_BCOL, 0xFFFFFFFF); |
| } else { |
| blitop = MGADWG_BFCOL | MGADWG_BITBLT | |
| MGADWG_SHIFTZERO | MGADWG_RSTR | (0x0C << 16); |
| } |
| mga_wait(7); |
| mga_out32(MGAREG_SGN, sign); |
| mga_out32(MGAREG_AR3, start); |
| mga_out32(MGAREG_AR0, stop); |
| mga_out32(MGAREG_AR5, skip); |
| mga_out32(MGAREG_FXBNDRY, (dstX | ((dstX + w-1) << 16))); |
| mga_out32(MGAREG_YDSTLEN, (dstY << 16) | h); |
| mga_out32(MGAREG_DWGCTL + MGAREG_EXEC, blitop); |
| |
| FB_AddBusySurface(src); |
| FB_AddBusySurface(dst); |
| |
| if ( dst == this->screen ) { |
| SDL_mutexV(hw_lock); |
| } |
| return(0); |
| } |
| |
| static int CheckHWBlit(_THIS, SDL_Surface *src, SDL_Surface *dst) |
| { |
| int accelerated; |
| |
| /* Set initial acceleration on */ |
| src->flags |= SDL_HWACCEL; |
| |
| /* Set the surface attributes */ |
| if ( (src->flags & SDL_SRCALPHA) == SDL_SRCALPHA ) { |
| if ( ! this->info.blit_hw_A ) { |
| src->flags &= ~SDL_HWACCEL; |
| } |
| } |
| if ( (src->flags & SDL_SRCCOLORKEY) == SDL_SRCCOLORKEY ) { |
| if ( ! this->info.blit_hw_CC ) { |
| src->flags &= ~SDL_HWACCEL; |
| } |
| } |
| |
| /* Check to see if final surface blit is accelerated */ |
| accelerated = !!(src->flags & SDL_HWACCEL); |
| if ( accelerated ) { |
| src->map->hw_blit = HWAccelBlit; |
| } |
| return(accelerated); |
| } |
| |
| void FB_MatroxAccel(_THIS, __u32 card) |
| { |
| /* We have hardware accelerated surface functions */ |
| this->CheckHWBlit = CheckHWBlit; |
| wait_vbl = WaitVBL; |
| wait_idle = WaitIdle; |
| |
| /* The Matrox has an accelerated color fill */ |
| this->info.blit_fill = 1; |
| this->FillHWRect = FillHWRect; |
| |
| /* The Matrox has accelerated normal and colorkey blits. */ |
| this->info.blit_hw = 1; |
| /* The Millenium I appears to do the colorkey test a word |
| at a time, and the transparency is intverted. (?) |
| */ |
| if ( card != FB_ACCEL_MATROX_MGA2064W ) { |
| this->info.blit_hw_CC = 1; |
| this->SetHWColorKey = SetHWColorKey; |
| } |
| |
| #if 0 /* Not yet implemented? */ |
| /* The Matrox G200/G400 has an accelerated alpha blit */ |
| if ( (card == FB_ACCEL_MATROX_MGAG200) |
| || (card == FB_ACCEL_MATROX_MGAG400) |
| ) { |
| this->info.blit_hw_A = 1; |
| this->SetHWAlpha = SetHWAlpha; |
| } |
| #endif |
| } |
