android/build/common.sh - emulator-unstable-refactoring - Git at Google

 # Copyright (C) 2008 The Android Open Source Project
 #
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at
 #
 #      http://www.apache.org/licenses/LICENSE-2.0
 #
 # Unless required by applicable law or agreed to in writing, software
 # distributed under the License is distributed on an "AS IS" BASIS,
 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 # See the License for the specific language governing permissions and
 # limitations under the License.
 #
 # This file is included by other shell scripts; do not execute it directly.
 # It contains common definitions.
 #
 PROGNAME=`basename $0`

 ## Logging support
 ##
 VERBOSE=yes
 VERBOSE2=no

 log ()
 {
     if [ "$VERBOSE" = "yes" ] ; then
         echo "$1"
     fi
 }

 log2 ()
 {
     if [ "$VERBOSE2" = "yes" ] ; then
         echo "$1"
     fi
 }

 ## Utilities
 ##

 # return the value of a given named variable
 # $1: variable name
 #
 var_value ()
 {
     # find a better way to do that ?
     local result
     eval result="$`echo $1`"
     echo $result
 }

 # convert to uppercase
 to_uppercase ()
 {
     echo $1 | tr "[:lower:]" "[:upper:]"
 }

 ## Normalize OS and CPU
 ##

 CPU=`uname -m`
 case "$CPU" in
     i?86) CPU=x86
     ;;
     amd64) CPU=x86_64
     ;;
     powerpc) CPU=ppc
     ;;
 esac

 log2 "CPU=$CPU"

 # at this point, the supported values for CPU are:
 #   x86
 #   x86_64
 #   ppc
 #
 # other values may be possible but haven't been tested
 #

 EXE=""
 OS=`uname -s`
 case "$OS" in
     Darwin)
         OS=darwin-$CPU
         ;;
     Linux)
         # note that building  32-bit binaries on x86_64 is handled later
         OS=linux-$CPU
 	;;
     FreeBSD)
         OS=freebsd-$CPU
         ;;
     CYGWIN*|*_NT-*)
         OS=windows
         EXE=.exe
         if [ "x$OSTYPE" = xcygwin ] ; then
             OS=cygwin
             HOST_CFLAGS="$CFLAGS -mno-cygwin"
             HOST_LDFLAGS="$LDFLAGS -mno-cygwin"
         fi
         ;;
 esac

 log2 "OS=$OS"
 log2 "EXE=$EXE"

 # at this point, the value of OS should be one of the following:
 #   linux-x86
 #   linux-x86_64
 #   darwin-x86
 #   darwin-x86_64
 #   darwin-ppc
 #   windows  (MSys)
 #   cygwin
 #
 # Note that cygwin is treated as a special case because it behaves very differently
 # for a few things
 #
 # other values may be possible but have not been tested

 # define HOST_OS as $OS without any cpu-specific suffix
 #
 case $OS in
     linux-*) HOST_OS=linux
     ;;
     darwin-*) HOST_OS=darwin
     ;;
     freebsd-*) HOST_OS=freebsd
     ;;
     *) HOST_OS=$OS
 esac

 # define HOST_ARCH as the $CPU
 HOST_ARCH=$CPU

 # define HOST_TAG
 # special case: windows-x86 => windows
 compute_host_tag ()
 {
     case $HOST_OS-$HOST_ARCH in
         cygwin-x86|windows-x86)
             HOST_TAG=windows
             ;;
         *)
             HOST_TAG=$HOST_OS-$HOST_ARCH
             ;;
     esac
 }
 compute_host_tag

 #### Toolchain support
 ####

 # Various probes are going to need to run a small C program
 TMPC=/tmp/android-$$-test.c
 TMPO=/tmp/android-$$-test.o
 TMPE=/tmp/android-$$-test$EXE
 TMPL=/tmp/android-$$-test.log

 # cleanup temporary files
 clean_temp ()
 {
     rm -f $TMPC $TMPO $TMPL $TMPE
 }

 # cleanup temp files then exit with an error
 clean_exit ()
 {
     clean_temp
     exit 1
 }

 # this function should be called to enforce the build of 32-bit binaries on 64-bit systems
 # that support it.
 FORCE_32BIT=no
 force_32bit_binaries ()
 {
     if [ $CPU = x86_64 ] ; then
         FORCE_32BIT=yes
         case $OS in
             linux-x86_64) OS=linux-x86 ;;
             darwin-x86_64) OS=darwin-x86 ;;
 	    freebsd-x86_64) OS=freebsd-x86 ;;
         esac
         HOST_ARCH=x86
         CPU=x86
         compute_host_tag
         log "Check32Bits: Forcing generation of 32-bit binaries (--try-64 to disable)"
     fi
 }

 # Enable linux-mingw32 compilation. This allows you to build
 # windows executables on a Linux machine, which is considerably
 # faster than using Cygwin / MSys to do the same job.
 #
 enable_linux_mingw ()
 {
     # Are we on Linux ?
     log "Mingw      : Checking for Linux host"
     if [ "$HOST_OS" != "linux" ] ; then
         echo "Sorry, but mingw compilation is only supported on Linux !"
         exit 1
     fi
     # Do we have the binaries installed
     log "Mingw      : Checking for mingw32 installation"
     MINGW32_PREFIX=i586-mingw32msvc
     find_program MINGW32_CC $MINGW32_PREFIX-gcc
     if [ -z "$MINGW32_CC" ] ; then
         echo "ERROR: It looks like $MINGW32_PREFIX-gcc is not in your path"
         echo "Please install the mingw32 package !"
         exit 1
     fi
     log2 "Mingw      : Found $MINGW32_CC"
     CC=$MINGW32_CC
     LD=$MINGW32_CC
     AR=$MINGW32_PREFIX-ar
     FORCE_32BIT=no
 }

 # Cygwin is normally not supported, unless you call this function
 #
 enable_cygwin ()
 {
     if [ $OS = cygwin ] ; then
         CFLAGS="$CFLAGS -mno-cygwin"
         LDFLAGS="$LDFLAGS -mno-cygwin"
         OS=windows
         HOST_OS=windows
     fi
 }

 # this function will setup the compiler and linker and check that they work as advertized
 # note that you should call 'force_32bit_binaries' before this one if you want it to work
 # as advertized.
 #
 setup_toolchain ()
 {
     if [ "$OS" = cygwin ] ; then
         echo "Do not compile this program or library with Cygwin, use MSYS instead !!"
         echo "As an experimental feature, you can try to --try-cygwin option to override this"
         exit 2
     fi

     if [ -z "$CC" ] ; then
         CC=gcc
         if [ $CPU = "powerpc" ] ; then
             CC=gcc-3.3
         fi
     fi

     # check that we can compile a trivial C program with this compiler
     cat > $TMPC <<EOF
 int main(void) {}
 EOF

     if [ $FORCE_32BIT = yes ] ; then
         CFLAGS="$CFLAGS -m32"
         LDFLAGS="$LDFLAGS -m32"
         compile
         if [ $? != 0 ] ; then
             # sometimes, we need to also tell the assembler to generate 32-bit binaries
             # this is highly dependent on your GCC installation (and no, we can't set
             # this flag all the time)
             CFLAGS="$CFLAGS -Wa,--32"
         fi
     fi

     compile
     if [ $? != 0 ] ; then
         echo "your C compiler doesn't seem to work: $CC"
         cat $TMPL
         clean_exit
     fi
     log "CC         : compiler check ok ($CC)"

     # check that we can link the trivial program into an executable
     if [ -z "$LD" ] ; then
         LD=$CC
     fi
     link
     if [ $? != 0 ] ; then
         OLD_LD=$LD
         LD=gcc
         compile
         link
         if [ $? != 0 ] ; then
             LD=$OLD_LD
             echo "your linker doesn't seem to work:"
             cat $TMPL
             clean_exit
         fi
     fi
     log "LD         : linker check ok ($LD)"

     if [ -z "$AR" ]; then
         AR=ar
     fi
     log "AR         : archiver ($AR)"
     clean_temp
 }

 # try to compile the current source file in $TMPC into an object
 # stores the error log into $TMPL
 #
 compile ()
 {
     log2 "Object     : $CC -o $TMPO -c $CFLAGS $TMPC"
     $CC -o $TMPO -c $CFLAGS $TMPC 2> $TMPL
 }

 # try to link the recently built file into an executable. error log in $TMPL
 #
 link()
 {
     log2 "Link      : $LD -o $TMPE $TMPO $LDFLAGS"
     $LD -o $TMPE $TMPO $LDFLAGS 2> $TMPL
 }

 # run a command
 #
 execute()
 {
     log2 "Running: $*"
     $*
 }

 # perform a simple compile / link / run of the source file in $TMPC
 compile_exec_run()
 {
     log2 "RunExec    : $CC -o $TMPE $CFLAGS $TMPC"
     compile
     if [ $? != 0 ] ; then
         echo "Failure to compile test program"
         cat $TMPC
         cat $TMPL
         clean_exit
     fi
     link
     if [ $? != 0 ] ; then
         echo "Failure to link test program"
         cat $TMPC
         echo "------"
         cat $TMPL
         clean_exit
     fi
     $TMPE
 }

 ## Feature test support
 ##

 # Each feature test allows us to check against a single target-specific feature
 # We run the feature checks in a Makefile in order to be able to do them in
 # parallel, and we also have some cached values in our output directory, just
 # in case.
 #
 # check that a given C program in $TMPC can be compiled on the host system
 # $1: variable name which will be set to "yes" or "no" depending on result
 # you can define EXTRA_CFLAGS for extra C compiler flags
 # for convenience, this variable will be unset by the function
 #
 feature_check_compile ()
 {
     local result_cc=yes
     local OLD_CFLAGS
     OLD_CFLAGS="$CFLAGS"
     CFLAGS="$CFLAGS $EXTRA_CFLAGS"
     compile
     if [ $? != 0 ] ; then
         result_cc=no
     fi
     eval $1=$result_cc
     EXTRA_CFLAGS=
     CFLAGS=$OLD_CFLAGS
 }

 # check that a given C program $TMPC can be linked on the host system
 # $1: variable name which will be set to "yes" or "no" depending on result
 # you can define EXTRA_CFLAGS for extra C compiler flags
 # you can define EXTRA_LDFLAGS for extra linker flags
 # for convenience, these variables will be unset by the function
 #
 feature_check_link ()
 {
     local result_cl=yes
     local OLD_CFLAGS OLD_LDFLAGS
     OLD_CFLAGS=$CFLAGS
     OLD_LDFLAGS=$LDFLAGS
     CFLAGS="$CFLAGS $EXTRA_CFLAGS"
     LDFLAGS="$LDFLAGS $EXTRA_LDFLAGS"
     compile
     if [ $? != 0 ] ; then
         result_cl=no
     else
         link
         if [ $? != 0 ] ; then
             result_cl=no
         fi
     fi
     CFLAGS=$OLD_CFLAGS
     LDFLAGS=$OLD_LDFLAGS
     eval $1=$result_cl
     clean_temp
 }

 # check that a given C header file exists on the host system
 # $1: variable name which will be set to "yes" or "no" depending on result
 # $2: header name
 #
 # you can define EXTRA_CFLAGS for extra C compiler flags
 # for convenience, this variable will be unset by the function.
 #
 feature_check_header ()
 {
     local result_ch
     log "HeaderCheck: $2"
     echo "#include $2" > $TMPC
     cat >> $TMPC <<EOF
         int main(void) { return 0; }
 EOF
     feature_check_compile result_ch
     eval $1=$result_ch
     #eval result=$`echo $1`
     #log  "Host       : $1=$result_ch"
     clean_temp
 }

 # run the test program that is in $TMPC and set its exit status
 # in the $1 variable.
 # you can define EXTRA_CFLAGS and EXTRA_LDFLAGS
 #
 feature_run_exec ()
 {
     local run_exec_result
     local OLD_CFLAGS="$CFLAGS"
     local OLD_LDFLAGS="$LDFLAGS"
     CFLAGS="$CFLAGS $EXTRA_CFLAGS"
     LDFLAGS="$LDFLAGS $EXTRA_LDFLAGS"
     compile_exec_run
     run_exec_result=$?
     CFLAGS="$OLD_CFLAGS"
     LDFLAGS="$OLD_LDFLAGS"
     eval $1=$run_exec_result
     log "Host       : $1=$run_exec_result"
     clean_temp
 }

 ## Android build system auto-detection
 ##

 # check whether we're running within the Android build system
 # sets the variable IN_ANDROID_BUILD to either "yes" or "no"
 #
 # in case of success, defines ANDROID_TOP to point to the top
 # of the Android source tree.
 #
 check_android_build ()
 {
     unset ANDROID_TOP
     IN_ANDROID_BUILD=no

     if [ -z "$ANDROID_BUILD_TOP" ] ; then
         return ;
     fi

     ANDROID_TOP=$ANDROID_BUILD_TOP
     log "ANDROID_TOP found at $ANDROID_TOP"
     # $ANDROID_TOP/config/envsetup.make is for the old tree layout
     # $ANDROID_TOP/build/envsetup.sh is for the new one
     ANDROID_CONFIG_MK=$ANDROID_TOP/build/core/config.mk
     if [ ! -f $ANDROID_CONFIG_MK ] ; then
         ANDROID_CONFIG_MK=$ANDROID_TOP/config/envsetup.make
     fi
     if [ ! -f $ANDROID_CONFIG_MK ] ; then
         echo "Weird: Cannot find build system root defaulting to non-Android build"
         unset ANDROID_TOP
         return
     fi
     # normalize ANDROID_TOP, we don't want a trailing /
     ANDROID_TOPDIR=`dirname $ANDROID_TOP`
     if [ "$ANDROID_TOPDIR" != "." ] ; then
         ANDROID_TOP=$ANDROID_TOPDIR/`basename $ANDROID_TOP`
     fi
     IN_ANDROID_BUILD=yes
 }

 # Get the value of an Android build variable as an absolute path.
 # you should only call this if IN_ANDROID_BUILD is "yes"
 #
 get_android_abs_build_var ()
 {
    (cd $ANDROID_TOP && CALLED_FROM_SETUP=true BUILD_SYSTEM=build/core make -f $ANDROID_CONFIG_MK dumpvar-abs-$1)
 }

 # Locate the Android prebuilt directory for your os
 # you should only call this if IN_ANDROID_BUILD is "yes"
 #
 # This will set ANDROID_PREBUILT_HOST_TAG, ANDROID_PREBUILT and ANDROID_PREBUILTS
 #
 locate_android_prebuilt ()
 {
     # locate prebuilt directory
     ANDROID_PREBUILT_HOST_TAG=$OS
     ANDROID_PREBUILT=$ANDROID_TOP/prebuilt/$ANDROID_PREBUILT_HOST_TAG  # AOSP still has it
     ANDROID_PREBUILTS=$ANDROID_TOP/prebuilts/misc/$ANDROID_PREBUILT_HOST_TAG # AOSP does't have it yet
     if [ ! -d $ANDROID_PREBUILT ] ; then
         # this can happen when building on x86_64, or in AOSP
         case $OS in
             linux-x86_64)
                 ANDROID_PREBUILT_HOST_TAG=linux-x86
                 ANDROID_PREBUILT=$ANDROID_TOP/prebuilt/$ANDROID_PREBUILT_HOST_TAG
                 ;;
             *)
         esac
         if [ ! -d $ANDROID_PREBUILT ] ; then
             ANDROID_PREBUILT=
         fi
     fi
     if [ ! -d $ANDROID_PREBUILTS ] ; then
         # this can happen when building on x86_64
         case $OS in
             linux-x86_64)
                 ANDROID_PREBUILT_HOST_TAG=linux-x86
                 ANDROID_PREBUILTS=$ANDROID_TOP/prebuilts/misc/$ANDROID_PREBUILT_HOST_TAG
                 ;;
             *)
         esac
         if [ ! -d $ANDROID_PREBUILTS ] ; then
             ANDROID_PREBUILTS=
         fi
     fi
     log "Prebuilt   : ANDROID_PREBUILT=$ANDROID_PREBUILT"
     log "Prebuilts  : ANDROID_PREBUILTS=$ANDROID_PREBUILTS"
 }

 ## Build configuration file support
 ## you must define $config_mk before calling this function
 ##
 create_config_mk ()
 {
     # create the directory if needed
     local  config_dir
     config_mk=${config_mk:-objs/config.make}
     config_dir=`dirname $config_mk`
     mkdir -p $config_dir 2> $TMPL
     if [ $? != 0 ] ; then
         echo "Can't create directory for build config file: $config_dir"
         cat $TMPL
         clean_exit
     fi

     # re-create the start of the configuration file
     log "Generate   : $config_mk"

     echo "# This file was autogenerated by $PROGNAME. Do not edit !" > $config_mk
     echo "OS          := $OS" >> $config_mk
     echo "HOST_OS     := $HOST_OS" >> $config_mk
     echo "HOST_ARCH   := $HOST_ARCH" >> $config_mk
     echo "CC          := $CC" >> $config_mk
     echo "LD          := $LD" >> $config_mk
     echo "AR          := $AR" >> $config_mk
     echo "CFLAGS      := $CFLAGS" >> $config_mk
     echo "LDFLAGS     := $LDFLAGS" >> $config_mk
     echo "HOST_CC     := $CC" >> $config_mk
     echo "HOST_LD     := $LD" >> $config_mk
     echo "HOST_AR     := $AR" >> $config_mk
 }

 add_android_config_mk ()
 {
     echo "" >> $config_mk
     if [ $TARGET_ARCH = arm ] ; then
     echo "TARGET_ARCH       := arm" >> $config_mk
     fi
     if [ $TARGET_ARCH = x86 ] ; then
     echo "TARGET_ARCH       := x86" >> $config_mk
     fi
     echo "HOST_PREBUILT_TAG := $HOST_TAG" >> $config_mk
     echo "PREBUILT          := $ANDROID_PREBUILT" >> $config_mk
     echo "PREBUILTS         := $ANDROID_PREBUILTS" >> $config_mk
 }

 # Find pattern $1 in string $2
 # This is to be used in if statements as in:
 #
 #    if pattern_match <pattern> <string>; then
 #       ...
 #    fi
 #
 pattern_match ()
 {
     echo "$2" | grep -q -E -e "$1"
 }

 # Find if a given shell program is available.
 # We need to take care of the fact that the 'which <foo>' command
 # may return either an empty string (Linux) or something like
 # "no <foo> in ..." (Darwin). Also, we need to redirect stderr
 # to /dev/null for Cygwin
 #
 # $1: variable name
 # $2: program name
 #
 # Result: set $1 to the full path of the corresponding command
 #         or to the empty/undefined string if not available
 #
 find_program ()
 {
     local PROG
     PROG=`which $2 2>/dev/null`
     if [ -n "$PROG" ] ; then
         if pattern_match '^no ' "$PROG"; then
             PROG=
         fi
     fi
     eval $1="$PROG"
 }
	# Copyright (C) 2008 The Android Open Source Project
	#
	# Licensed under the Apache License, Version 2.0 (the "License");
	# you may not use this file except in compliance with the License.
	# You may obtain a copy of the License at
	#
	# http://www.apache.org/licenses/LICENSE-2.0
	#
	# Unless required by applicable law or agreed to in writing, software
	# distributed under the License is distributed on an "AS IS" BASIS,
	# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
	# See the License for the specific language governing permissions and
	# limitations under the License.
	#
	# This file is included by other shell scripts; do not execute it directly.
	# It contains common definitions.
	#
	PROGNAME=`basename $0`

	## Logging support
	##
	VERBOSE=yes
	VERBOSE2=no

	log ()
	{
	if [ "$VERBOSE" = "yes" ] ; then
	echo "$1"
	fi
	}

	log2 ()
	{
	if [ "$VERBOSE2" = "yes" ] ; then
	echo "$1"
	fi
	}

	## Utilities
	##

	# return the value of a given named variable
	# $1: variable name
	#
	var_value ()
	{
	# find a better way to do that ?
	local result
	eval result="$`echo $1`"
	echo $result
	}

	# convert to uppercase
	to_uppercase ()
	{
	echo $1 \| tr "[:lower:]" "[:upper:]"
	}

	## Normalize OS and CPU
	##

	CPU=`uname -m`
	case "$CPU" in
	i?86) CPU=x86
	;;
	amd64) CPU=x86_64
	;;
	powerpc) CPU=ppc
	;;
	esac

	log2 "CPU=$CPU"

	# at this point, the supported values for CPU are:
	# x86
	# x86_64
	# ppc
	#
	# other values may be possible but haven't been tested
	#

	EXE=""
	OS=`uname -s`
	case "$OS" in
	Darwin)
	OS=darwin-$CPU
	;;
	Linux)
	# note that building 32-bit binaries on x86_64 is handled later
	OS=linux-$CPU
	;;
	FreeBSD)
	OS=freebsd-$CPU
	;;
	CYGWIN\|_NT-*)
	OS=windows
	EXE=.exe
	if [ "x$OSTYPE" = xcygwin ] ; then
	OS=cygwin
	HOST_CFLAGS="$CFLAGS -mno-cygwin"
	HOST_LDFLAGS="$LDFLAGS -mno-cygwin"
	fi
	;;
	esac

	log2 "OS=$OS"
	log2 "EXE=$EXE"

	# at this point, the value of OS should be one of the following:
	# linux-x86
	# linux-x86_64
	# darwin-x86
	# darwin-x86_64
	# darwin-ppc
	# windows (MSys)
	# cygwin
	#
	# Note that cygwin is treated as a special case because it behaves very differently
	# for a few things
	#
	# other values may be possible but have not been tested

	# define HOST_OS as $OS without any cpu-specific suffix
	#
	case $OS in
	linux-*) HOST_OS=linux
	;;
	darwin-*) HOST_OS=darwin
	;;
	freebsd-*) HOST_OS=freebsd
	;;
	*) HOST_OS=$OS
	esac

	# define HOST_ARCH as the $CPU
	HOST_ARCH=$CPU

	# define HOST_TAG
	# special case: windows-x86 => windows
	compute_host_tag ()
	{
	case $HOST_OS-$HOST_ARCH in
	cygwin-x86\|windows-x86)
	HOST_TAG=windows
	;;
	*)
	HOST_TAG=$HOST_OS-$HOST_ARCH
	;;
	esac
	}
	compute_host_tag

	#### Toolchain support
	####

	# Various probes are going to need to run a small C program
	TMPC=/tmp/android-$$-test.c
	TMPO=/tmp/android-$$-test.o
	TMPE=/tmp/android-$$-test$EXE
	TMPL=/tmp/android-$$-test.log

	# cleanup temporary files
	clean_temp ()
	{
	rm -f $TMPC $TMPO $TMPL $TMPE
	}

	# cleanup temp files then exit with an error
	clean_exit ()
	{
	clean_temp
	exit 1
	}

	# this function should be called to enforce the build of 32-bit binaries on 64-bit systems
	# that support it.
	FORCE_32BIT=no
	force_32bit_binaries ()
	{
	if [ $CPU = x86_64 ] ; then
	FORCE_32BIT=yes
	case $OS in
	linux-x86_64) OS=linux-x86 ;;
	darwin-x86_64) OS=darwin-x86 ;;
	freebsd-x86_64) OS=freebsd-x86 ;;
	esac
	HOST_ARCH=x86
	CPU=x86
	compute_host_tag
	log "Check32Bits: Forcing generation of 32-bit binaries (--try-64 to disable)"
	fi
	}

	# Enable linux-mingw32 compilation. This allows you to build
	# windows executables on a Linux machine, which is considerably
	# faster than using Cygwin / MSys to do the same job.
	#
	enable_linux_mingw ()
	{
	# Are we on Linux ?
	log "Mingw : Checking for Linux host"
	if [ "$HOST_OS" != "linux" ] ; then
	echo "Sorry, but mingw compilation is only supported on Linux !"
	exit 1
	fi
	# Do we have the binaries installed
	log "Mingw : Checking for mingw32 installation"
	MINGW32_PREFIX=i586-mingw32msvc
	find_program MINGW32_CC $MINGW32_PREFIX-gcc
	if [ -z "$MINGW32_CC" ] ; then
	echo "ERROR: It looks like $MINGW32_PREFIX-gcc is not in your path"
	echo "Please install the mingw32 package !"
	exit 1
	fi
	log2 "Mingw : Found $MINGW32_CC"
	CC=$MINGW32_CC
	LD=$MINGW32_CC
	AR=$MINGW32_PREFIX-ar
	FORCE_32BIT=no
	}

	# Cygwin is normally not supported, unless you call this function
	#
	enable_cygwin ()
	{
	if [ $OS = cygwin ] ; then
	CFLAGS="$CFLAGS -mno-cygwin"
	LDFLAGS="$LDFLAGS -mno-cygwin"
	OS=windows
	HOST_OS=windows
	fi
	}

	# this function will setup the compiler and linker and check that they work as advertized
	# note that you should call 'force_32bit_binaries' before this one if you want it to work
	# as advertized.
	#
	setup_toolchain ()
	{
	if [ "$OS" = cygwin ] ; then
	echo "Do not compile this program or library with Cygwin, use MSYS instead !!"
	echo "As an experimental feature, you can try to --try-cygwin option to override this"
	exit 2
	fi

	if [ -z "$CC" ] ; then
	CC=gcc
	if [ $CPU = "powerpc" ] ; then
	CC=gcc-3.3
	fi
	fi

	# check that we can compile a trivial C program with this compiler
	cat > $TMPC <<EOF
	int main(void) {}
	EOF

	if [ $FORCE_32BIT = yes ] ; then
	CFLAGS="$CFLAGS -m32"
	LDFLAGS="$LDFLAGS -m32"
	compile
	if [ $? != 0 ] ; then
	# sometimes, we need to also tell the assembler to generate 32-bit binaries
	# this is highly dependent on your GCC installation (and no, we can't set
	# this flag all the time)
	CFLAGS="$CFLAGS -Wa,--32"
	fi
	fi

	compile
	if [ $? != 0 ] ; then
	echo "your C compiler doesn't seem to work: $CC"
	cat $TMPL
	clean_exit
	fi
	log "CC : compiler check ok ($CC)"

	# check that we can link the trivial program into an executable
	if [ -z "$LD" ] ; then
	LD=$CC
	fi
	link
	if [ $? != 0 ] ; then
	OLD_LD=$LD
	LD=gcc
	compile
	link
	if [ $? != 0 ] ; then
	LD=$OLD_LD
	echo "your linker doesn't seem to work:"
	cat $TMPL
	clean_exit
	fi
	fi
	log "LD : linker check ok ($LD)"

	if [ -z "$AR" ]; then
	AR=ar
	fi
	log "AR : archiver ($AR)"
	clean_temp
	}

	# try to compile the current source file in $TMPC into an object
	# stores the error log into $TMPL
	#
	compile ()
	{
	log2 "Object : $CC -o $TMPO -c $CFLAGS $TMPC"
	$CC -o $TMPO -c $CFLAGS $TMPC 2> $TMPL
	}

	# try to link the recently built file into an executable. error log in $TMPL
	#
	link()
	{
	log2 "Link : $LD -o $TMPE $TMPO $LDFLAGS"
	$LD -o $TMPE $TMPO $LDFLAGS 2> $TMPL
	}

	# run a command
	#
	execute()
	{
	log2 "Running: $*"
	$*
	}

	# perform a simple compile / link / run of the source file in $TMPC
	compile_exec_run()
	{
	log2 "RunExec : $CC -o $TMPE $CFLAGS $TMPC"
	compile
	if [ $? != 0 ] ; then
	echo "Failure to compile test program"
	cat $TMPC
	cat $TMPL
	clean_exit
	fi
	link
	if [ $? != 0 ] ; then
	echo "Failure to link test program"
	cat $TMPC
	echo "------"
	cat $TMPL
	clean_exit
	fi
	$TMPE
	}

	## Feature test support
	##

	# Each feature test allows us to check against a single target-specific feature
	# We run the feature checks in a Makefile in order to be able to do them in
	# parallel, and we also have some cached values in our output directory, just
	# in case.
	#
	# check that a given C program in $TMPC can be compiled on the host system
	# $1: variable name which will be set to "yes" or "no" depending on result
	# you can define EXTRA_CFLAGS for extra C compiler flags
	# for convenience, this variable will be unset by the function
	#
	feature_check_compile ()
	{
	local result_cc=yes
	local OLD_CFLAGS
	OLD_CFLAGS="$CFLAGS"
	CFLAGS="$CFLAGS $EXTRA_CFLAGS"
	compile
	if [ $? != 0 ] ; then
	result_cc=no
	fi
	eval $1=$result_cc
	EXTRA_CFLAGS=
	CFLAGS=$OLD_CFLAGS
	}

	# check that a given C program $TMPC can be linked on the host system
	# $1: variable name which will be set to "yes" or "no" depending on result
	# you can define EXTRA_CFLAGS for extra C compiler flags
	# you can define EXTRA_LDFLAGS for extra linker flags
	# for convenience, these variables will be unset by the function
	#
	feature_check_link ()
	{
	local result_cl=yes
	local OLD_CFLAGS OLD_LDFLAGS
	OLD_CFLAGS=$CFLAGS
	OLD_LDFLAGS=$LDFLAGS
	CFLAGS="$CFLAGS $EXTRA_CFLAGS"
	LDFLAGS="$LDFLAGS $EXTRA_LDFLAGS"
	compile
	if [ $? != 0 ] ; then
	result_cl=no
	else
	link
	if [ $? != 0 ] ; then
	result_cl=no
	fi
	fi
	CFLAGS=$OLD_CFLAGS
	LDFLAGS=$OLD_LDFLAGS
	eval $1=$result_cl
	clean_temp
	}

	# check that a given C header file exists on the host system
	# $1: variable name which will be set to "yes" or "no" depending on result
	# $2: header name
	#
	# you can define EXTRA_CFLAGS for extra C compiler flags
	# for convenience, this variable will be unset by the function.
	#
	feature_check_header ()
	{
	local result_ch
	log "HeaderCheck: $2"
	echo "#include $2" > $TMPC
	cat >> $TMPC <<EOF
	int main(void) { return 0; }
	EOF
	feature_check_compile result_ch
	eval $1=$result_ch
	#eval result=$`echo $1`
	#log "Host : $1=$result_ch"
	clean_temp
	}

	# run the test program that is in $TMPC and set its exit status
	# in the $1 variable.
	# you can define EXTRA_CFLAGS and EXTRA_LDFLAGS
	#
	feature_run_exec ()
	{
	local run_exec_result
	local OLD_CFLAGS="$CFLAGS"
	local OLD_LDFLAGS="$LDFLAGS"
	CFLAGS="$CFLAGS $EXTRA_CFLAGS"
	LDFLAGS="$LDFLAGS $EXTRA_LDFLAGS"
	compile_exec_run
	run_exec_result=$?
	CFLAGS="$OLD_CFLAGS"
	LDFLAGS="$OLD_LDFLAGS"
	eval $1=$run_exec_result
	log "Host : $1=$run_exec_result"
	clean_temp
	}

	## Android build system auto-detection
	##

	# check whether we're running within the Android build system
	# sets the variable IN_ANDROID_BUILD to either "yes" or "no"
	#
	# in case of success, defines ANDROID_TOP to point to the top
	# of the Android source tree.
	#
	check_android_build ()
	{
	unset ANDROID_TOP
	IN_ANDROID_BUILD=no

	if [ -z "$ANDROID_BUILD_TOP" ] ; then
	return ;
	fi

	ANDROID_TOP=$ANDROID_BUILD_TOP
	log "ANDROID_TOP found at $ANDROID_TOP"
	# $ANDROID_TOP/config/envsetup.make is for the old tree layout
	# $ANDROID_TOP/build/envsetup.sh is for the new one
	ANDROID_CONFIG_MK=$ANDROID_TOP/build/core/config.mk
	if [ ! -f $ANDROID_CONFIG_MK ] ; then
	ANDROID_CONFIG_MK=$ANDROID_TOP/config/envsetup.make
	fi
	if [ ! -f $ANDROID_CONFIG_MK ] ; then
	echo "Weird: Cannot find build system root defaulting to non-Android build"
	unset ANDROID_TOP
	return
	fi
	# normalize ANDROID_TOP, we don't want a trailing /
	ANDROID_TOPDIR=`dirname $ANDROID_TOP`
	if [ "$ANDROID_TOPDIR" != "." ] ; then
	ANDROID_TOP=$ANDROID_TOPDIR/`basename $ANDROID_TOP`
	fi
	IN_ANDROID_BUILD=yes
	}

	# Get the value of an Android build variable as an absolute path.
	# you should only call this if IN_ANDROID_BUILD is "yes"
	#
	get_android_abs_build_var ()
	{
	(cd $ANDROID_TOP && CALLED_FROM_SETUP=true BUILD_SYSTEM=build/core make -f $ANDROID_CONFIG_MK dumpvar-abs-$1)
	}

	# Locate the Android prebuilt directory for your os
	# you should only call this if IN_ANDROID_BUILD is "yes"
	#
	# This will set ANDROID_PREBUILT_HOST_TAG, ANDROID_PREBUILT and ANDROID_PREBUILTS
	#
	locate_android_prebuilt ()
	{
	# locate prebuilt directory
	ANDROID_PREBUILT_HOST_TAG=$OS
	ANDROID_PREBUILT=$ANDROID_TOP/prebuilt/$ANDROID_PREBUILT_HOST_TAG # AOSP still has it
	ANDROID_PREBUILTS=$ANDROID_TOP/prebuilts/misc/$ANDROID_PREBUILT_HOST_TAG # AOSP does't have it yet
	if [ ! -d $ANDROID_PREBUILT ] ; then
	# this can happen when building on x86_64, or in AOSP
	case $OS in
	linux-x86_64)
	ANDROID_PREBUILT_HOST_TAG=linux-x86
	ANDROID_PREBUILT=$ANDROID_TOP/prebuilt/$ANDROID_PREBUILT_HOST_TAG
	;;
	*)
	esac
	if [ ! -d $ANDROID_PREBUILT ] ; then
	ANDROID_PREBUILT=
	fi
	fi
	if [ ! -d $ANDROID_PREBUILTS ] ; then
	# this can happen when building on x86_64
	case $OS in
	linux-x86_64)
	ANDROID_PREBUILT_HOST_TAG=linux-x86
	ANDROID_PREBUILTS=$ANDROID_TOP/prebuilts/misc/$ANDROID_PREBUILT_HOST_TAG
	;;
	*)
	esac
	if [ ! -d $ANDROID_PREBUILTS ] ; then
	ANDROID_PREBUILTS=
	fi
	fi
	log "Prebuilt : ANDROID_PREBUILT=$ANDROID_PREBUILT"
	log "Prebuilts : ANDROID_PREBUILTS=$ANDROID_PREBUILTS"
	}

	## Build configuration file support
	## you must define $config_mk before calling this function
	##
	create_config_mk ()
	{
	# create the directory if needed
	local config_dir
	config_mk=${config_mk:-objs/config.make}
	config_dir=`dirname $config_mk`
	mkdir -p $config_dir 2> $TMPL
	if [ $? != 0 ] ; then
	echo "Can't create directory for build config file: $config_dir"
	cat $TMPL
	clean_exit
	fi

	# re-create the start of the configuration file
	log "Generate : $config_mk"

	echo "# This file was autogenerated by $PROGNAME. Do not edit !" > $config_mk
	echo "OS := $OS" >> $config_mk
	echo "HOST_OS := $HOST_OS" >> $config_mk
	echo "HOST_ARCH := $HOST_ARCH" >> $config_mk
	echo "CC := $CC" >> $config_mk
	echo "LD := $LD" >> $config_mk
	echo "AR := $AR" >> $config_mk
	echo "CFLAGS := $CFLAGS" >> $config_mk
	echo "LDFLAGS := $LDFLAGS" >> $config_mk
	echo "HOST_CC := $CC" >> $config_mk
	echo "HOST_LD := $LD" >> $config_mk
	echo "HOST_AR := $AR" >> $config_mk
	}

	add_android_config_mk ()
	{
	echo "" >> $config_mk
	if [ $TARGET_ARCH = arm ] ; then
	echo "TARGET_ARCH := arm" >> $config_mk
	fi
	if [ $TARGET_ARCH = x86 ] ; then
	echo "TARGET_ARCH := x86" >> $config_mk
	fi
	echo "HOST_PREBUILT_TAG := $HOST_TAG" >> $config_mk
	echo "PREBUILT := $ANDROID_PREBUILT" >> $config_mk
	echo "PREBUILTS := $ANDROID_PREBUILTS" >> $config_mk
	}

	# Find pattern $1 in string $2
	# This is to be used in if statements as in:
	#
	# if pattern_match <pattern> <string>; then
	# ...
	# fi
	#
	pattern_match ()
	{
	echo "$2" \| grep -q -E -e "$1"
	}

	# Find if a given shell program is available.
	# We need to take care of the fact that the 'which <foo>' command
	# may return either an empty string (Linux) or something like
	# "no <foo> in ..." (Darwin). Also, we need to redirect stderr
	# to /dev/null for Cygwin
	#
	# $1: variable name
	# $2: program name
	#
	# Result: set $1 to the full path of the corresponding command
	# or to the empty/undefined string if not available
	#
	find_program ()
	{
	local PROG
	PROG=`which $2 2>/dev/null`
	if [ -n "$PROG" ] ; then
	if pattern_match '^no ' "$PROG"; then
	PROG=
	fi
	fi
	eval $1="$PROG"
	}