blob: b47e33457ff2843b087b84c94b5b39a3b9f61e88 [file] [log] [blame]
#!/bin/bash
# This script is used to rebuild all emulator binaries from sources
# and package them for easier distribution.
set -e
export LANG=C
export LC_ALL=C
PROGDIR=$(dirname "$0")
PROGNAME=$(basename "$0")
panic () {
echo "ERROR: $@"
exit 1
}
VERBOSE=1
# Dump a message if VERBOSE is greater or equal to $1
# $1: level
# $2+: Message to print.
dump_n () {
local LEVEL=$1
shift
if [ "$VERBOSE" -ge "$LEVEL" ]; then
printf "%s\n" "$@"
fi
}
# Dump a message at VERBOSE level 1 (the default one).
dump () {
dump_n 1 "$@"
}
# Dump a message at VERBOSE level 2 (if --verbose was used).
log () {
dump_n 2 "$@"
}
# Run a command, dump its output depending on VERBOSE level, i.e.:
# 0 -> Don't display anything.
# 1 -> Display error messages only.
# 2 -> Display the command, its output and error.
run () {
case $VERBOSE in
0)
"$@" >/dev/null 2>&1
;;
1)
"$@" >/dev/null
;;
*)
echo "COMMAND: $@"
"$@"
;;
esac
}
# Same as 'run', but slightly more quiet:
# 0 or 1 -> Don't display anything
# 2 -> Diplay the command, its output and error.
run2 () {
case $VERBOSE in
0|1)
"$@" >/dev/null 2>&1
;;
2)
echo "COMMAND: $@"
"$@" >/dev/null 2>&1
;;
*)
echo "COMMAND: $@"
"$@"
;;
esac
}
# $1: Source directory.
# $2: Destination directory.
# $3: List of files to copy, relative to $1 (if empty, all files will be copied).
copy_directory_files () {
local SRCDIR DSTDIR FILES
SRCDIR=$1
DSTDIR=$2
shift; shift;
FILES="$@"
mkdir -p "$DSTDIR" || panic "Cannot create destination directory: $DSTDIR"
(cd $SRCDIR && tar cf - $FILES) | (cd $DSTDIR && tar xf -)
}
# $1: Source directory (must be a git checkout).
# $2: Destination directory.
copy_directory_git_files () {
local SRCDIR DSTDIR FILES
SRCDIR=$1
DSTDIR=$2
log "Copying git sources from $SRCDIR to $DSTDIR"
# The list of names can contain spaces, so put them in a file to avoid
# any issues.
TMP_FILE_LIST=$(mktemp)
(cd $SRCDIR && git ls-files) > $TMP_FILE_LIST
mkdir -p "$DSTDIR" || panic "Cannot create destination directory: $DSTDIR"
(cd $SRCDIR && tar cf - -T $TMP_FILE_LIST) | (cd $DSTDIR && tar xf -)
rm -f $TMP_FILE_LIST
}
# Convert a comma-separated list into a space-separated one.
commas_to_spaces () {
printf "%s" "$@" | tr ',' ' '
}
# Rebuild Darwin binaries remotely through SSH
# $1: Host name.
# $2: Source package file.
build_darwin_binaries_on () {
local HOST PKG_FILE PKG_FILE_BASENAME DST_DIR TARFLAGS
HOST=$1
PKG_FILE=$2
# The package file is ....../something-darwin.tar.bz2
# And should unpack to a single directory named 'something/'
# so extract the prefix from the package name.
PKG_FILE_BASENAME=$(basename "$PKG_FILE")
PKG_FILE_PREFIX=${PKG_FILE_BASENAME%%-sources.tar.bz2}
if [ "$PKG_FILE_PREFIX" = "$PKG_FILE_BASENAME" ]; then
# Sanity check.
panic "Can't get package prefix from $PKG_FILE_BASENAME"
fi
# Where to do the work on the remote host.
DST_DIR=/tmp/android-emulator-build
if [ "$VERBOSE" -ge 3 ]; then
TARFLAGS="v"
fi
dump "Copying sources to Darwin host: $HOST"
run ssh $HOST "mkdir -p $DST_DIR && rm -rf $DST_DIR/$PKG_FILE_BASENAME"
cat "$PKG_FILE" | ssh $HOST "cd $DST_DIR && tar x${TARGFLAGS}f -"
dump "Rebuilding Darwin binaries remotely."
run ssh $HOST "bash -l -c \"cd $DST_DIR/$PKG_FILE_PREFIX/qemu && ./android-rebuild.sh $REBUILD_FLAGS\"" ||
panic "Can't rebuild binaries on Darwin, use --verbose to see why!"
dump "Retrieving Darwin binaries from: $HOST"
rm -rf objs/*
run scp $HOST:$DST_DIR/$PKG_FILE_PREFIX/qemu/objs/emulator* objs/
run scp -r $HOST:$DST_DIR/$PKG_FILE_PREFIX/qemu/objs/lib objs/lib
# TODO(digit): Retrieve PC BIOS files.
run ssh $HOST rm -rf $DST_DIR/$PKG_FILE_PREFIX
}
# Extract the git commit SHA1 of a given directory, and put its value
# in a destination variable. If the target directory is not the root
# of a git checkout, abort.
# $1: Destination variable name.
# $2: Git directory.
# Example: extract_commit_description GTEST_DESC "$GTEST_DIR"
extract_git_commit_description () {
local VARNAME GIT_DIR SHA1
VARNAME=$1
GIT_DIR=$2
# Extract the commit description, then escape (') characters in it.
SHA1=$(cd $GIT_DIR && git log --oneline -1 .) || \
panic "Not a Git directory: $GIT_DIR"
SHA1=$(printf "%s" "$SHA1" | tr "'" "\\'")
eval $VARNAME=\'$SHA1\'
}
# Defaults.
DEFAULT_REVISION=$(date +%Y%m%d)
DEFAULT_PKG_PREFIX=android-emulator
DEFAULT_PKG_DIR=/tmp
DEFAULT_DARWIN_SSH=$ANDROID_EMULATOR_DARWIN_SSH
case $(uname -s) in
Linux)
DEFAULT_SYSTEMS="linux,windows"
HOST_SYSTEM=linux
;;
Darwin)
DEFAULT_SYSTEMS="darwin"
HOST_SYSTEM=darwin
;;
*)
panic "Unsupported system! This can only run on Linux and Darwin."
esac
# Command-line parsing.
DO_HELP=
OPT_COPY_PREBUILTS=
OPT_DARWIN_SSH=
OPT_PKG_DIR=
OPT_PKG_PREFIX=
OPT_REVISION=
OPT_SOURCES=
OPT_SYSTEM=
for OPT; do
case $OPT in
--help|-?)
DO_HELP=true
;;
--copy-prebuilts=*)
OPT_COPY_PREBUILTS=${OPT##--copy-prebuilts=}
;;
--darwin-ssh=*)
OPT_DARWIN_SSH=${OPT##--darwin-ssh=}
;;
--package-dir=*)
OPT_PKG_DIR=${OPT##--package-dir=}
;;
--package-prefix=*)
OPT_PKG_PREFIX=${OPT##--package-prefix=}
;;
--quiet)
VERBOSE=$(( $VERBOSE - 1 ))
;;
--sources)
OPT_SOURCES=true
;;
--revision=*)
OPT_REVISION=${OPT##--revision=}
;;
--system=*)
OPT_SYSTEM=${OPT##--system=}
;;
--verbose)
VERBOSE=$(( $VERBOSE + 1 ))
;;
-*)
panic "Unsupported option '$OPT', see --help."
;;
*)
panic "Unsupported parameter '$OPT', see --help."
esac
done
if [ "$DO_HELP" ]; then
cat <<EOF
Usage: $PROGNAME [options]
Rebuild the emulator binaries from source and package them into tarballs
for easier distribution.
New packages are placed by default at $DEFAULT_PKG_DIR
Use --package-dir=<path> to use another output directory.
Packages names are prefixed with $DEFAULT_PKG_PREFIX-<revision>, where
the <revision> is the current ISO date by default. You can use
--package-prefix=<prefix> and --revision=<revision> to change this.
Binary packages will include the OpenGLES emulation libraries if they can
be found in your current workspace, not otherwise.
Use --sources option to also generate a source tarball.
Use --darwin-ssh=<host> to build perform a remote build of the Darwin
binaries on a remote host through ssh. Note that this forces --sources
as well. You can also define ANDROID_EMULATOR_DARWIN_SSH in your
environment to setup a default value for this option.
Use --copy-prebuilts=<path> to specify the path of an AOSP workspace/checkout,
and to copy 64-bit prebuilt binaries to <path>/prebuilts/android-emulator/
for both Linux and Darwin platforms. This option requires the use of
--darwin-ssh=<host> or ANDROID_EMULATOR_DARWIN_SSH to build the Darwin
binaries.
Valid options (defaults are inside brackets):
--help | -? Print this message.
--package-dir=<path> Change package output directory [$DEFAULT_PKG_DIR].
--revision=<name> Change revision [$DEFAULT_REVISION].
--sources Also create sources package.
--system=<list> Specify host system list [$DEFAULT_SYSTEMS].
--copy-prebuilts=<path> Copy 64-bit Linux and Darwin binaries to
<path>/prebuilts/android-emulator/
EOF
exit 0
fi
if [ "$OPT_PKG_PREFIX" ]; then
PKG_PREFIX=$OPT_PKG_PREFIX
else
PKG_PREFIX=$DEFAULT_PKG_PREFIX
log "Auto-config: --package-prefix=$PKG_PREFIX"
fi
if [ "$OPT_REVISION" ]; then
PKG_REVISION=$OPT_REVISION
else
PKG_REVISION=$DEFAULT_REVISION
log "Auto-config: --revision=$PKG_REVISION"
fi
if [ "$OPT_PKG_DIR" ]; then
PKG_DIR=$OPT_PKG_DIR
mkdir -p "$PKG_DIR" || panic "Can't create directory: $PKG_DIR"
else
PKG_DIR=$DEFAULT_PKG_DIR
log "Auto-config: --package-dir=$PKG_DIR"
fi
if [ "$OPT_SYSTEM" ]; then
SYSTEMS=$(commas_to_spaces $OPT_SYSTEM)
else
SYSTEMS=$(commas_to_spaces $DEFAULT_SYSTEMS)
log "Auto-config: --system=$SYSTEMS"
fi
if [ -z "$OPT_DARWIN_SSH" ]; then
DARWIN_SSH=$DEFAULT_DARWIN_SSH
if [ "$DARWIN_SSH" ]; then
log "Auto-config: --darwin-ssh=$DARWIN_SSH (from environment)."
fi
else
DARWIN_SSH=$OPT_DARWIN_SSH
fi
if [ "$DARWIN_SSH" ]; then
if [ -z "$OPT_SOURCES" ]; then
OPT_SOURCES=true
log "Auto-config: --sources (remote Darwin build)."
fi
SYSTEMS="$SYSTEMS darwin"
fi
if [ "$OPT_COPY_PREBUILTS" ]; then
if [ -z "$DARWIN_SSH" ]; then
panic "The --copy-prebuilts=<dir> option requires --darwin-ssh=<host>."
fi
TARGET_AOSP=$OPT_COPY_PREBUILTS
if [ ! -f "$TARGET_AOSP/build/envsetup.sh" ]; then
panic "Not an AOSP checkout / workspace: $TARGET_AOSP"
fi
TARGET_PREBUILTS_DIR=$TARGET_AOSP/prebuilts/android-emulator
mkdir -p "$TARGET_PREBUILTS_DIR"
fi
case $VERBOSE in
0|1)
REBUILD_FLAGS=""
;;
2)
REBUILD_FLAGS="--verbose"
;;
*)
REBUILD_FLAGS="--verbose --verbose"
;;
esac
# Remove duplicates.
SYSTEMS=$(echo "$SYSTEMS" | tr ' ' '\n' | sort -u | tr '\n' ' ')
log "Building for the following systems: $SYSTEMS"
# Default build directory.
TEMP_BUILD_DIR=/tmp/$USER-qemu-package-binaries
# Ensure the build directory is removed when the script exits or is
# interrupted.
clean_exit () {
if [ -n "$TEMP_BUILD_DIR" -a -d "$TEMP_BUILD_DIR" ]; then
rm -rf "$TEMP_BUILD_DIR"
fi
exit $?
}
trap "clean_exit 0" EXIT
trap "clean_exit \$?" QUIT HUP INT
# Do some sanity checks to verify that the current source directory
# doesn't have unchecked files and other bad things lingering.
# Assume this script is under distrib/
QEMU_DIR=$(cd "$PROGDIR"/.. && pwd -P)
log "Found emulator directory: $QEMU_DIR"
cd $QEMU_DIR
if [ ! -d "$QEMU_DIR"/.git ]; then
panic "This directory must be a checkout of \$AOSP/platform/external/qemu!"
fi
UNCHECKED_FILES=$(git ls-files -o -x objs/ -x images/emulator_icon.o)
if [ "$UNCHECKED_FILES" ]; then
echo "ERROR: There are unchecked files in the current directory!"
echo "Please remove them:"
echo "$UNCHECKED_FILES"
exit 1
fi
extract_git_commit_description QEMU_GIT_COMMIT "$QEMU_DIR"
GTEST_DIR=$(dirname $QEMU_DIR)/gtest
if [ ! -d "$GTEST_DIR" ]; then
panic "Cannot find GoogleTest source directory: $GTEST_DIR"
fi
log "Found GoogleTest directory: $GTEST_DIR"
extract_git_commit_description GTEST_GIT_COMMIT "$GTEST_DIR"
EMUGL_DIR=$QEMU_DIR/../../sdk/emulator/opengl
if [ ! -d "$EMUGL_DIR" ]; then
panic "Cannot find GPU emulation source directory: $EMUGL_DIR"
fi
log "Found GPU emulation directory: $EMUGL_DIR"
extract_git_commit_description EMUGL_GIT_COMMIT "$EMUGL_DIR"
SOURCES_PKG_FILE=
if [ "$OPT_SOURCES" ]; then
BUILD_DIR=$TEMP_BUILD_DIR/sources/$PKG_PREFIX-$PKG_REVISION
PKG_NAME="$PKG_REVISION-sources"
dump "[$PKG_NAME] Copying GoogleTest source files."
copy_directory_git_files "$GTEST_DIR" "$BUILD_DIR"/gtest
dump "[$PKG_NAME] Copying Emulator source files."
copy_directory_git_files "$QEMU_DIR" "$BUILD_DIR"/qemu
dump "[$PKG_NAME] Copying GPU emulation library sources."
copy_directory_git_files "$EMUGL_DIR" "$BUILD_DIR"/opengl
dump "[$PKG_NAME] Generating README file."
cat > "$BUILD_DIR"/README <<EOF
This directory contains the sources of the Android emulator.
Use './rebuild.sh' to rebuild the binaries from scratch.
EOF
dump "[$PKG_NAME] Generating rebuild script."
cat > "$BUILD_DIR"/rebuild.sh <<EOF
#!/bin/sh
# Auto-generated script used to rebuild the Android emulator binaries
# from sources. Note that this does not include the GLES emulation
# libraries.
cd \$(dirname "\$0") &&
(cd qemu && ./android-rebuild.sh --ignore-audio) &&
mkdir -p bin/ &&
cp -rfp qemu/objs/emulator* bin/ &&
echo "Emulator binaries are under \$(pwd -P)/bin/"
echo "IMPORTANT: The GLES emulation libraries must be copied to:"
echo " \$(pwd -P)/bin/lib"
EOF
chmod +x "$BUILD_DIR"/rebuild.sh
PKG_FILE=$PKG_DIR/$PKG_PREFIX-$PKG_REVISION-sources.tar.bz2
SOURCES_PKG_FILE=$PKG_FILE
dump "[$PKG_NAME] Creating tarball..."
(run cd "$BUILD_DIR"/.. && run tar cjf "$PKG_FILE" $PKG_PREFIX-$PKG_REVISION)
fi
for SYSTEM in $SYSTEMS; do
PKG_NAME="$PKG_REVISION-$SYSTEM"
dump "[$PKG_NAME] Rebuilding binaries from sources."
run cd $QEMU_DIR
case $SYSTEM in
$HOST_SYSTEM)
run ./android-rebuild.sh $REBUILD_FLAGS || panic "Use ./android-rebuild.sh to see why."
;;
darwin)
if [ -z "$DARWIN_SSH" ]; then
# You can only rebuild Darwin binaries on non-Darwin systems
# by using --darwin-ssh=<host>.
panic "You can only rebuild Darwin binaries with --darwin-ssh"
fi
if [ -z "$SOURCES_PKG_FILE" ]; then
panic "You must use --sources to build Darwin binaries through ssh"
fi
build_darwin_binaries_on "$DARWIN_SSH" "$SOURCES_PKG_FILE"
;;
windows)
if [ "$HOST_SYSTEM" != "linux" ]; then
panic "Windows binaries can only be rebuilt on Linux!"
fi
run ./android-rebuild.sh --mingw $REBUILD_FLAGS || panic "Use ./android-rebuild.sh --mingw to see why."
;;
*)
panic "Can't rebuild $SYSTEM binaries on $HOST_SYSTEM for now!"
;;
esac
dump "[$PKG_NAME] Copying emulator binaries."
TEMP_PKG_DIR=$TEMP_BUILD_DIR/$SYSTEM/$PKG_PREFIX-$PKG_REVISION
run mkdir -p "$TEMP_PKG_DIR"/tools
run cp -p objs/emulator* "$TEMP_PKG_DIR"/tools
if [ -d "objs/lib" ]; then
dump "[$PKG_NAME] Copying GLES emulation libraries."
run mkdir -p "$TEMP_PKG_DIR"/tools/lib
run2 cp -rp objs/lib/* "$TEMP_PKG_DIR"/tools/lib/
fi
dump "[$PKG_NAME] Creating README file."
cat > $TEMP_PKG_DIR/README <<EOF
This directory contains Android emulator binaries. You can use them directly
by defining ANDROID_SDK_ROOT in your environment, then call tools/emulator
with the usual set of options.
To install them directly into your SDK, copy them with:
cp -r tools/* \$ANDROID_SDK_ROOT/tools/
EOF
dump "[$PKG_NAME] Copying license files."
mkdir -p "$TEMP_PKG_DIR"/licenses/
cp COPYING COPYING.LIB "$TEMP_PKG_DIR"/licenses/
dump "[$PKG_NAME] Creating tarball."
PKG_FILE=$PKG_DIR/$PKG_PREFIX-$PKG_REVISION-$SYSTEM.tar.bz2
(run cd "$TEMP_BUILD_DIR"/$SYSTEM && run tar cf $PKG_FILE $PKG_PREFIX-$PKG_REVISION)
done
if [ "$OPT_COPY_PREBUILTS" ]; then
for SYSTEM in linux darwin; do
SRC_DIR="$TEMP_BUILD_DIR"/$SYSTEM/$PKG_PREFIX-$PKG_REVISION
DST_DIR=$TARGET_PREBUILTS_DIR/$SYSTEM-x86_64
dump "[$SYSTEM-x86_64] Copying emulator binaries into $DST_DIR"
run mkdir -p "$DST_DIR" || panic "Could not create directory: $DST_DIR"
case $SYSTEM in
linux) DLLEXT=.so;;
darwin) DLLEXT=.dylib;;
*) panic "Unsupported prebuilt system: $SYSTEM";;
esac
FILES="emulator"
for ARCH in arm x86 mips; do
FILES="$FILES emulator64-$ARCH"
done
for LIB in OpenglRender EGL_translator GLES_CM_translator GLES_V2_translator; do
FILES="$FILES lib/lib64$LIB$DLLEXT"
done
(run cd "$SRC_DIR/tools" && tar cf - $FILES) | (cd $DST_DIR && tar xf -) ||
panic "Could not copy binaries to $DST_DIR"
done
cat > $TARGET_PREBUILTS_DIR/README <<EOF
This directory contains prebuilt emulator binaries that were generated by
running the following command on a 64-bit Linux machine:
external/qemu/distrib/package-release.sh \\
--darwin-ssh=<host> \\
--copy-prebuilts=<path>
Where <host> is the host name of a Darwin machine, and <path> is the root
path of this AOSP repo workspace.
Below is the list of specific commits for each input directory used:
external/gtest $GTEST_GIT_COMMIT
external/qemu $QEMU_GIT_COMMIT
sdk/emulator/opengl $EMUGL_GIT_COMMIT
EOF
fi
dump "Done. See $PKG_DIR"
ls -lh "$PKG_DIR"/$PKG_PREFIX-$PKG_REVISION*