| /* |
| * QEMU AHCI Emulation |
| * |
| * Copyright (c) 2010 qiaochong@loongson.cn |
| * Copyright (c) 2010 Roland Elek <elek.roland@gmail.com> |
| * Copyright (c) 2010 Sebastian Herbszt <herbszt@gmx.de> |
| * Copyright (c) 2010 Alexander Graf <agraf@suse.de> |
| * |
| * This library is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU Lesser General Public |
| * License as published by the Free Software Foundation; either |
| * version 2 of the License, or (at your option) any later version. |
| * |
| * This library is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * Lesser General Public License for more details. |
| * |
| * You should have received a copy of the GNU Lesser General Public |
| * License along with this library; if not, see <http://www.gnu.org/licenses/>. |
| * |
| */ |
| |
| #include <hw/hw.h> |
| #include <hw/pci/msi.h> |
| #include <hw/i386/pc.h> |
| #include <hw/pci/pci.h> |
| #include <hw/sysbus.h> |
| |
| #include "monitor/monitor.h" |
| #include "sysemu/block-backend.h" |
| #include "sysemu/dma.h" |
| #include "internal.h" |
| #include <hw/ide/pci.h> |
| #include <hw/ide/ahci.h> |
| |
| /* #define DEBUG_AHCI */ |
| |
| #ifdef DEBUG_AHCI |
| #define DPRINTF(port, fmt, ...) \ |
| do { fprintf(stderr, "ahci: %s: [%d] ", __FUNCTION__, port); \ |
| fprintf(stderr, fmt, ## __VA_ARGS__); } while (0) |
| #else |
| #define DPRINTF(port, fmt, ...) do {} while(0) |
| #endif |
| |
| static void check_cmd(AHCIState *s, int port); |
| static int handle_cmd(AHCIState *s,int port,int slot); |
| static void ahci_reset_port(AHCIState *s, int port); |
| static void ahci_write_fis_d2h(AHCIDevice *ad, uint8_t *cmd_fis); |
| static void ahci_init_d2h(AHCIDevice *ad); |
| static int ahci_dma_prepare_buf(IDEDMA *dma, int is_write); |
| static void ahci_commit_buf(IDEDMA *dma, uint32_t tx_bytes); |
| |
| |
| static uint32_t ahci_port_read(AHCIState *s, int port, int offset) |
| { |
| uint32_t val; |
| AHCIPortRegs *pr; |
| pr = &s->dev[port].port_regs; |
| |
| switch (offset) { |
| case PORT_LST_ADDR: |
| val = pr->lst_addr; |
| break; |
| case PORT_LST_ADDR_HI: |
| val = pr->lst_addr_hi; |
| break; |
| case PORT_FIS_ADDR: |
| val = pr->fis_addr; |
| break; |
| case PORT_FIS_ADDR_HI: |
| val = pr->fis_addr_hi; |
| break; |
| case PORT_IRQ_STAT: |
| val = pr->irq_stat; |
| break; |
| case PORT_IRQ_MASK: |
| val = pr->irq_mask; |
| break; |
| case PORT_CMD: |
| val = pr->cmd; |
| break; |
| case PORT_TFDATA: |
| val = pr->tfdata; |
| break; |
| case PORT_SIG: |
| val = pr->sig; |
| break; |
| case PORT_SCR_STAT: |
| if (s->dev[port].port.ifs[0].blk) { |
| val = SATA_SCR_SSTATUS_DET_DEV_PRESENT_PHY_UP | |
| SATA_SCR_SSTATUS_SPD_GEN1 | SATA_SCR_SSTATUS_IPM_ACTIVE; |
| } else { |
| val = SATA_SCR_SSTATUS_DET_NODEV; |
| } |
| break; |
| case PORT_SCR_CTL: |
| val = pr->scr_ctl; |
| break; |
| case PORT_SCR_ERR: |
| val = pr->scr_err; |
| break; |
| case PORT_SCR_ACT: |
| pr->scr_act &= ~s->dev[port].finished; |
| s->dev[port].finished = 0; |
| val = pr->scr_act; |
| break; |
| case PORT_CMD_ISSUE: |
| val = pr->cmd_issue; |
| break; |
| case PORT_RESERVED: |
| default: |
| val = 0; |
| } |
| DPRINTF(port, "offset: 0x%x val: 0x%x\n", offset, val); |
| return val; |
| |
| } |
| |
| static void ahci_irq_raise(AHCIState *s, AHCIDevice *dev) |
| { |
| AHCIPCIState *d = container_of(s, AHCIPCIState, ahci); |
| PCIDevice *pci_dev = |
| (PCIDevice *)object_dynamic_cast(OBJECT(d), TYPE_PCI_DEVICE); |
| |
| DPRINTF(0, "raise irq\n"); |
| |
| if (pci_dev && msi_enabled(pci_dev)) { |
| msi_notify(pci_dev, 0); |
| } else { |
| qemu_irq_raise(s->irq); |
| } |
| } |
| |
| static void ahci_irq_lower(AHCIState *s, AHCIDevice *dev) |
| { |
| AHCIPCIState *d = container_of(s, AHCIPCIState, ahci); |
| PCIDevice *pci_dev = |
| (PCIDevice *)object_dynamic_cast(OBJECT(d), TYPE_PCI_DEVICE); |
| |
| DPRINTF(0, "lower irq\n"); |
| |
| if (!pci_dev || !msi_enabled(pci_dev)) { |
| qemu_irq_lower(s->irq); |
| } |
| } |
| |
| static void ahci_check_irq(AHCIState *s) |
| { |
| int i; |
| |
| DPRINTF(-1, "check irq %#x\n", s->control_regs.irqstatus); |
| |
| s->control_regs.irqstatus = 0; |
| for (i = 0; i < s->ports; i++) { |
| AHCIPortRegs *pr = &s->dev[i].port_regs; |
| if (pr->irq_stat & pr->irq_mask) { |
| s->control_regs.irqstatus |= (1 << i); |
| } |
| } |
| |
| if (s->control_regs.irqstatus && |
| (s->control_regs.ghc & HOST_CTL_IRQ_EN)) { |
| ahci_irq_raise(s, NULL); |
| } else { |
| ahci_irq_lower(s, NULL); |
| } |
| } |
| |
| static void ahci_trigger_irq(AHCIState *s, AHCIDevice *d, |
| int irq_type) |
| { |
| DPRINTF(d->port_no, "trigger irq %#x -> %x\n", |
| irq_type, d->port_regs.irq_mask & irq_type); |
| |
| d->port_regs.irq_stat |= irq_type; |
| ahci_check_irq(s); |
| } |
| |
| static void map_page(AddressSpace *as, uint8_t **ptr, uint64_t addr, |
| uint32_t wanted) |
| { |
| hwaddr len = wanted; |
| |
| if (*ptr) { |
| dma_memory_unmap(as, *ptr, len, DMA_DIRECTION_FROM_DEVICE, len); |
| } |
| |
| *ptr = dma_memory_map(as, addr, &len, DMA_DIRECTION_FROM_DEVICE); |
| if (len < wanted) { |
| dma_memory_unmap(as, *ptr, len, DMA_DIRECTION_FROM_DEVICE, len); |
| *ptr = NULL; |
| } |
| } |
| |
| static void ahci_port_write(AHCIState *s, int port, int offset, uint32_t val) |
| { |
| AHCIPortRegs *pr = &s->dev[port].port_regs; |
| |
| DPRINTF(port, "offset: 0x%x val: 0x%x\n", offset, val); |
| switch (offset) { |
| case PORT_LST_ADDR: |
| pr->lst_addr = val; |
| map_page(s->as, &s->dev[port].lst, |
| ((uint64_t)pr->lst_addr_hi << 32) | pr->lst_addr, 1024); |
| s->dev[port].cur_cmd = NULL; |
| break; |
| case PORT_LST_ADDR_HI: |
| pr->lst_addr_hi = val; |
| map_page(s->as, &s->dev[port].lst, |
| ((uint64_t)pr->lst_addr_hi << 32) | pr->lst_addr, 1024); |
| s->dev[port].cur_cmd = NULL; |
| break; |
| case PORT_FIS_ADDR: |
| pr->fis_addr = val; |
| map_page(s->as, &s->dev[port].res_fis, |
| ((uint64_t)pr->fis_addr_hi << 32) | pr->fis_addr, 256); |
| break; |
| case PORT_FIS_ADDR_HI: |
| pr->fis_addr_hi = val; |
| map_page(s->as, &s->dev[port].res_fis, |
| ((uint64_t)pr->fis_addr_hi << 32) | pr->fis_addr, 256); |
| break; |
| case PORT_IRQ_STAT: |
| pr->irq_stat &= ~val; |
| ahci_check_irq(s); |
| break; |
| case PORT_IRQ_MASK: |
| pr->irq_mask = val & 0xfdc000ff; |
| ahci_check_irq(s); |
| break; |
| case PORT_CMD: |
| pr->cmd = val & ~(PORT_CMD_LIST_ON | PORT_CMD_FIS_ON); |
| |
| if (pr->cmd & PORT_CMD_START) { |
| pr->cmd |= PORT_CMD_LIST_ON; |
| } |
| |
| if (pr->cmd & PORT_CMD_FIS_RX) { |
| pr->cmd |= PORT_CMD_FIS_ON; |
| } |
| |
| /* XXX usually the FIS would be pending on the bus here and |
| issuing deferred until the OS enables FIS receival. |
| Instead, we only submit it once - which works in most |
| cases, but is a hack. */ |
| if ((pr->cmd & PORT_CMD_FIS_ON) && |
| !s->dev[port].init_d2h_sent) { |
| ahci_init_d2h(&s->dev[port]); |
| s->dev[port].init_d2h_sent = true; |
| } |
| |
| check_cmd(s, port); |
| break; |
| case PORT_TFDATA: |
| /* Read Only. */ |
| break; |
| case PORT_SIG: |
| /* Read Only */ |
| break; |
| case PORT_SCR_STAT: |
| /* Read Only */ |
| break; |
| case PORT_SCR_CTL: |
| if (((pr->scr_ctl & AHCI_SCR_SCTL_DET) == 1) && |
| ((val & AHCI_SCR_SCTL_DET) == 0)) { |
| ahci_reset_port(s, port); |
| } |
| pr->scr_ctl = val; |
| break; |
| case PORT_SCR_ERR: |
| pr->scr_err &= ~val; |
| break; |
| case PORT_SCR_ACT: |
| /* RW1 */ |
| pr->scr_act |= val; |
| break; |
| case PORT_CMD_ISSUE: |
| pr->cmd_issue |= val; |
| check_cmd(s, port); |
| break; |
| default: |
| break; |
| } |
| } |
| |
| static uint64_t ahci_mem_read(void *opaque, hwaddr addr, |
| unsigned size) |
| { |
| AHCIState *s = opaque; |
| uint32_t val = 0; |
| |
| if (addr < AHCI_GENERIC_HOST_CONTROL_REGS_MAX_ADDR) { |
| switch (addr) { |
| case HOST_CAP: |
| val = s->control_regs.cap; |
| break; |
| case HOST_CTL: |
| val = s->control_regs.ghc; |
| break; |
| case HOST_IRQ_STAT: |
| val = s->control_regs.irqstatus; |
| break; |
| case HOST_PORTS_IMPL: |
| val = s->control_regs.impl; |
| break; |
| case HOST_VERSION: |
| val = s->control_regs.version; |
| break; |
| } |
| |
| DPRINTF(-1, "(addr 0x%08X), val 0x%08X\n", (unsigned) addr, val); |
| } else if ((addr >= AHCI_PORT_REGS_START_ADDR) && |
| (addr < (AHCI_PORT_REGS_START_ADDR + |
| (s->ports * AHCI_PORT_ADDR_OFFSET_LEN)))) { |
| val = ahci_port_read(s, (addr - AHCI_PORT_REGS_START_ADDR) >> 7, |
| addr & AHCI_PORT_ADDR_OFFSET_MASK); |
| } |
| |
| return val; |
| } |
| |
| |
| |
| static void ahci_mem_write(void *opaque, hwaddr addr, |
| uint64_t val, unsigned size) |
| { |
| AHCIState *s = opaque; |
| |
| /* Only aligned reads are allowed on AHCI */ |
| if (addr & 3) { |
| fprintf(stderr, "ahci: Mis-aligned write to addr 0x" |
| TARGET_FMT_plx "\n", addr); |
| return; |
| } |
| |
| if (addr < AHCI_GENERIC_HOST_CONTROL_REGS_MAX_ADDR) { |
| DPRINTF(-1, "(addr 0x%08X), val 0x%08"PRIX64"\n", (unsigned) addr, val); |
| |
| switch (addr) { |
| case HOST_CAP: /* R/WO, RO */ |
| /* FIXME handle R/WO */ |
| break; |
| case HOST_CTL: /* R/W */ |
| if (val & HOST_CTL_RESET) { |
| DPRINTF(-1, "HBA Reset\n"); |
| ahci_reset(s); |
| } else { |
| s->control_regs.ghc = (val & 0x3) | HOST_CTL_AHCI_EN; |
| ahci_check_irq(s); |
| } |
| break; |
| case HOST_IRQ_STAT: /* R/WC, RO */ |
| s->control_regs.irqstatus &= ~val; |
| ahci_check_irq(s); |
| break; |
| case HOST_PORTS_IMPL: /* R/WO, RO */ |
| /* FIXME handle R/WO */ |
| break; |
| case HOST_VERSION: /* RO */ |
| /* FIXME report write? */ |
| break; |
| default: |
| DPRINTF(-1, "write to unknown register 0x%x\n", (unsigned)addr); |
| } |
| } else if ((addr >= AHCI_PORT_REGS_START_ADDR) && |
| (addr < (AHCI_PORT_REGS_START_ADDR + |
| (s->ports * AHCI_PORT_ADDR_OFFSET_LEN)))) { |
| ahci_port_write(s, (addr - AHCI_PORT_REGS_START_ADDR) >> 7, |
| addr & AHCI_PORT_ADDR_OFFSET_MASK, val); |
| } |
| |
| } |
| |
| static const MemoryRegionOps ahci_mem_ops = { |
| .read = ahci_mem_read, |
| .write = ahci_mem_write, |
| .endianness = DEVICE_LITTLE_ENDIAN, |
| }; |
| |
| static uint64_t ahci_idp_read(void *opaque, hwaddr addr, |
| unsigned size) |
| { |
| AHCIState *s = opaque; |
| |
| if (addr == s->idp_offset) { |
| /* index register */ |
| return s->idp_index; |
| } else if (addr == s->idp_offset + 4) { |
| /* data register - do memory read at location selected by index */ |
| return ahci_mem_read(opaque, s->idp_index, size); |
| } else { |
| return 0; |
| } |
| } |
| |
| static void ahci_idp_write(void *opaque, hwaddr addr, |
| uint64_t val, unsigned size) |
| { |
| AHCIState *s = opaque; |
| |
| if (addr == s->idp_offset) { |
| /* index register - mask off reserved bits */ |
| s->idp_index = (uint32_t)val & ((AHCI_MEM_BAR_SIZE - 1) & ~3); |
| } else if (addr == s->idp_offset + 4) { |
| /* data register - do memory write at location selected by index */ |
| ahci_mem_write(opaque, s->idp_index, val, size); |
| } |
| } |
| |
| static const MemoryRegionOps ahci_idp_ops = { |
| .read = ahci_idp_read, |
| .write = ahci_idp_write, |
| .endianness = DEVICE_LITTLE_ENDIAN, |
| }; |
| |
| |
| static void ahci_reg_init(AHCIState *s) |
| { |
| int i; |
| |
| s->control_regs.cap = (s->ports - 1) | |
| (AHCI_NUM_COMMAND_SLOTS << 8) | |
| (AHCI_SUPPORTED_SPEED_GEN1 << AHCI_SUPPORTED_SPEED) | |
| HOST_CAP_NCQ | HOST_CAP_AHCI; |
| |
| s->control_regs.impl = (1 << s->ports) - 1; |
| |
| s->control_regs.version = AHCI_VERSION_1_0; |
| |
| for (i = 0; i < s->ports; i++) { |
| s->dev[i].port_state = STATE_RUN; |
| } |
| } |
| |
| static void check_cmd(AHCIState *s, int port) |
| { |
| AHCIPortRegs *pr = &s->dev[port].port_regs; |
| int slot; |
| |
| if ((pr->cmd & PORT_CMD_START) && pr->cmd_issue) { |
| for (slot = 0; (slot < 32) && pr->cmd_issue; slot++) { |
| if ((pr->cmd_issue & (1U << slot)) && |
| !handle_cmd(s, port, slot)) { |
| pr->cmd_issue &= ~(1U << slot); |
| } |
| } |
| } |
| } |
| |
| static void ahci_check_cmd_bh(void *opaque) |
| { |
| AHCIDevice *ad = opaque; |
| |
| qemu_bh_delete(ad->check_bh); |
| ad->check_bh = NULL; |
| |
| if ((ad->busy_slot != -1) && |
| !(ad->port.ifs[0].status & (BUSY_STAT|DRQ_STAT))) { |
| /* no longer busy */ |
| ad->port_regs.cmd_issue &= ~(1 << ad->busy_slot); |
| ad->busy_slot = -1; |
| } |
| |
| check_cmd(ad->hba, ad->port_no); |
| } |
| |
| static void ahci_init_d2h(AHCIDevice *ad) |
| { |
| uint8_t init_fis[20]; |
| IDEState *ide_state = &ad->port.ifs[0]; |
| |
| memset(init_fis, 0, sizeof(init_fis)); |
| |
| init_fis[4] = 1; |
| init_fis[12] = 1; |
| |
| if (ide_state->drive_kind == IDE_CD) { |
| init_fis[5] = ide_state->lcyl; |
| init_fis[6] = ide_state->hcyl; |
| } |
| |
| ahci_write_fis_d2h(ad, init_fis); |
| } |
| |
| static void ahci_reset_port(AHCIState *s, int port) |
| { |
| AHCIDevice *d = &s->dev[port]; |
| AHCIPortRegs *pr = &d->port_regs; |
| IDEState *ide_state = &d->port.ifs[0]; |
| int i; |
| |
| DPRINTF(port, "reset port\n"); |
| |
| ide_bus_reset(&d->port); |
| ide_state->ncq_queues = AHCI_MAX_CMDS; |
| |
| pr->scr_stat = 0; |
| pr->scr_err = 0; |
| pr->scr_act = 0; |
| pr->tfdata = 0x7F; |
| pr->sig = 0xFFFFFFFF; |
| d->busy_slot = -1; |
| d->init_d2h_sent = false; |
| |
| ide_state = &s->dev[port].port.ifs[0]; |
| if (!ide_state->blk) { |
| return; |
| } |
| |
| /* reset ncq queue */ |
| for (i = 0; i < AHCI_MAX_CMDS; i++) { |
| NCQTransferState *ncq_tfs = &s->dev[port].ncq_tfs[i]; |
| if (!ncq_tfs->used) { |
| continue; |
| } |
| |
| if (ncq_tfs->aiocb) { |
| blk_aio_cancel(ncq_tfs->aiocb); |
| ncq_tfs->aiocb = NULL; |
| } |
| |
| /* Maybe we just finished the request thanks to blk_aio_cancel() */ |
| if (!ncq_tfs->used) { |
| continue; |
| } |
| |
| qemu_sglist_destroy(&ncq_tfs->sglist); |
| ncq_tfs->used = 0; |
| } |
| |
| s->dev[port].port_state = STATE_RUN; |
| if (!ide_state->blk) { |
| pr->sig = 0; |
| ide_state->status = SEEK_STAT | WRERR_STAT; |
| } else if (ide_state->drive_kind == IDE_CD) { |
| pr->sig = SATA_SIGNATURE_CDROM; |
| ide_state->lcyl = 0x14; |
| ide_state->hcyl = 0xeb; |
| DPRINTF(port, "set lcyl = %d\n", ide_state->lcyl); |
| ide_state->status = SEEK_STAT | WRERR_STAT | READY_STAT; |
| } else { |
| pr->sig = SATA_SIGNATURE_DISK; |
| ide_state->status = SEEK_STAT | WRERR_STAT; |
| } |
| |
| ide_state->error = 1; |
| ahci_init_d2h(d); |
| } |
| |
| static void debug_print_fis(uint8_t *fis, int cmd_len) |
| { |
| #ifdef DEBUG_AHCI |
| int i; |
| |
| fprintf(stderr, "fis:"); |
| for (i = 0; i < cmd_len; i++) { |
| if ((i & 0xf) == 0) { |
| fprintf(stderr, "\n%02x:",i); |
| } |
| fprintf(stderr, "%02x ",fis[i]); |
| } |
| fprintf(stderr, "\n"); |
| #endif |
| } |
| |
| static void ahci_write_fis_sdb(AHCIState *s, int port, uint32_t finished) |
| { |
| AHCIDevice *ad = &s->dev[port]; |
| AHCIPortRegs *pr = &ad->port_regs; |
| IDEState *ide_state; |
| SDBFIS *sdb_fis; |
| |
| if (!s->dev[port].res_fis || |
| !(pr->cmd & PORT_CMD_FIS_RX)) { |
| return; |
| } |
| |
| sdb_fis = (SDBFIS *)&ad->res_fis[RES_FIS_SDBFIS]; |
| ide_state = &ad->port.ifs[0]; |
| |
| sdb_fis->type = 0xA1; |
| /* Interrupt pending & Notification bit */ |
| sdb_fis->flags = (ad->hba->control_regs.irqstatus ? (1 << 6) : 0); |
| sdb_fis->status = ide_state->status & 0x77; |
| sdb_fis->error = ide_state->error; |
| /* update SAct field in SDB_FIS */ |
| s->dev[port].finished |= finished; |
| sdb_fis->payload = cpu_to_le32(ad->finished); |
| |
| /* Update shadow registers (except BSY 0x80 and DRQ 0x08) */ |
| pr->tfdata = (ad->port.ifs[0].error << 8) | |
| (ad->port.ifs[0].status & 0x77) | |
| (pr->tfdata & 0x88); |
| |
| ahci_trigger_irq(s, ad, PORT_IRQ_SDB_FIS); |
| } |
| |
| static void ahci_write_fis_pio(AHCIDevice *ad, uint16_t len) |
| { |
| AHCIPortRegs *pr = &ad->port_regs; |
| uint8_t *pio_fis, *cmd_fis; |
| uint64_t tbl_addr; |
| dma_addr_t cmd_len = 0x80; |
| IDEState *s = &ad->port.ifs[0]; |
| |
| if (!ad->res_fis || !(pr->cmd & PORT_CMD_FIS_RX)) { |
| return; |
| } |
| |
| /* map cmd_fis */ |
| tbl_addr = le64_to_cpu(ad->cur_cmd->tbl_addr); |
| cmd_fis = dma_memory_map(ad->hba->as, tbl_addr, &cmd_len, |
| DMA_DIRECTION_TO_DEVICE); |
| |
| if (cmd_fis == NULL) { |
| DPRINTF(ad->port_no, "dma_memory_map failed in ahci_write_fis_pio"); |
| ahci_trigger_irq(ad->hba, ad, PORT_IRQ_HBUS_ERR); |
| return; |
| } |
| |
| if (cmd_len != 0x80) { |
| DPRINTF(ad->port_no, |
| "dma_memory_map mapped too few bytes in ahci_write_fis_pio"); |
| dma_memory_unmap(ad->hba->as, cmd_fis, cmd_len, |
| DMA_DIRECTION_TO_DEVICE, cmd_len); |
| ahci_trigger_irq(ad->hba, ad, PORT_IRQ_HBUS_ERR); |
| return; |
| } |
| |
| pio_fis = &ad->res_fis[RES_FIS_PSFIS]; |
| |
| pio_fis[0] = 0x5f; |
| pio_fis[1] = (ad->hba->control_regs.irqstatus ? (1 << 6) : 0); |
| pio_fis[2] = s->status; |
| pio_fis[3] = s->error; |
| |
| pio_fis[4] = s->sector; |
| pio_fis[5] = s->lcyl; |
| pio_fis[6] = s->hcyl; |
| pio_fis[7] = s->select; |
| pio_fis[8] = s->hob_sector; |
| pio_fis[9] = s->hob_lcyl; |
| pio_fis[10] = s->hob_hcyl; |
| pio_fis[11] = 0; |
| pio_fis[12] = cmd_fis[12]; |
| pio_fis[13] = cmd_fis[13]; |
| pio_fis[14] = 0; |
| pio_fis[15] = s->status; |
| pio_fis[16] = len & 255; |
| pio_fis[17] = len >> 8; |
| pio_fis[18] = 0; |
| pio_fis[19] = 0; |
| |
| /* Update shadow registers: */ |
| pr->tfdata = (ad->port.ifs[0].error << 8) | |
| ad->port.ifs[0].status; |
| |
| if (pio_fis[2] & ERR_STAT) { |
| ahci_trigger_irq(ad->hba, ad, PORT_IRQ_TF_ERR); |
| } |
| |
| ahci_trigger_irq(ad->hba, ad, PORT_IRQ_PIOS_FIS); |
| |
| dma_memory_unmap(ad->hba->as, cmd_fis, cmd_len, |
| DMA_DIRECTION_TO_DEVICE, cmd_len); |
| } |
| |
| static void ahci_write_fis_d2h(AHCIDevice *ad, uint8_t *cmd_fis) |
| { |
| AHCIPortRegs *pr = &ad->port_regs; |
| uint8_t *d2h_fis; |
| int i; |
| dma_addr_t cmd_len = 0x80; |
| int cmd_mapped = 0; |
| IDEState *s = &ad->port.ifs[0]; |
| |
| if (!ad->res_fis || !(pr->cmd & PORT_CMD_FIS_RX)) { |
| return; |
| } |
| |
| if (!cmd_fis) { |
| /* map cmd_fis */ |
| uint64_t tbl_addr = le64_to_cpu(ad->cur_cmd->tbl_addr); |
| cmd_fis = dma_memory_map(ad->hba->as, tbl_addr, &cmd_len, |
| DMA_DIRECTION_TO_DEVICE); |
| cmd_mapped = 1; |
| } |
| |
| d2h_fis = &ad->res_fis[RES_FIS_RFIS]; |
| |
| d2h_fis[0] = 0x34; |
| d2h_fis[1] = (ad->hba->control_regs.irqstatus ? (1 << 6) : 0); |
| d2h_fis[2] = s->status; |
| d2h_fis[3] = s->error; |
| |
| d2h_fis[4] = s->sector; |
| d2h_fis[5] = s->lcyl; |
| d2h_fis[6] = s->hcyl; |
| d2h_fis[7] = s->select; |
| d2h_fis[8] = s->hob_sector; |
| d2h_fis[9] = s->hob_lcyl; |
| d2h_fis[10] = s->hob_hcyl; |
| d2h_fis[11] = 0; |
| d2h_fis[12] = cmd_fis[12]; |
| d2h_fis[13] = cmd_fis[13]; |
| for (i = 14; i < 20; i++) { |
| d2h_fis[i] = 0; |
| } |
| |
| /* Update shadow registers: */ |
| pr->tfdata = (ad->port.ifs[0].error << 8) | |
| ad->port.ifs[0].status; |
| |
| if (d2h_fis[2] & ERR_STAT) { |
| ahci_trigger_irq(ad->hba, ad, PORT_IRQ_TF_ERR); |
| } |
| |
| ahci_trigger_irq(ad->hba, ad, PORT_IRQ_D2H_REG_FIS); |
| |
| if (cmd_mapped) { |
| dma_memory_unmap(ad->hba->as, cmd_fis, cmd_len, |
| DMA_DIRECTION_TO_DEVICE, cmd_len); |
| } |
| } |
| |
| static int prdt_tbl_entry_size(const AHCI_SG *tbl) |
| { |
| return (le32_to_cpu(tbl->flags_size) & AHCI_PRDT_SIZE_MASK) + 1; |
| } |
| |
| static int ahci_populate_sglist(AHCIDevice *ad, QEMUSGList *sglist, |
| int32_t offset) |
| { |
| AHCICmdHdr *cmd = ad->cur_cmd; |
| uint32_t opts = le32_to_cpu(cmd->opts); |
| uint64_t prdt_addr = le64_to_cpu(cmd->tbl_addr) + 0x80; |
| int sglist_alloc_hint = opts >> AHCI_CMD_HDR_PRDT_LEN; |
| dma_addr_t prdt_len = (sglist_alloc_hint * sizeof(AHCI_SG)); |
| dma_addr_t real_prdt_len = prdt_len; |
| uint8_t *prdt; |
| int i; |
| int r = 0; |
| uint64_t sum = 0; |
| int off_idx = -1; |
| int64_t off_pos = -1; |
| int tbl_entry_size; |
| IDEBus *bus = &ad->port; |
| BusState *qbus = BUS(bus); |
| |
| /* |
| * Note: AHCI PRDT can describe up to 256GiB. SATA/ATA only support |
| * transactions of up to 32MiB as of ATA8-ACS3 rev 1b, assuming a |
| * 512 byte sector size. We limit the PRDT in this implementation to |
| * a reasonably large 2GiB, which can accommodate the maximum transfer |
| * request for sector sizes up to 32K. |
| */ |
| |
| if (!sglist_alloc_hint) { |
| DPRINTF(ad->port_no, "no sg list given by guest: 0x%08x\n", opts); |
| return -1; |
| } |
| |
| /* map PRDT */ |
| if (!(prdt = dma_memory_map(ad->hba->as, prdt_addr, &prdt_len, |
| DMA_DIRECTION_TO_DEVICE))){ |
| DPRINTF(ad->port_no, "map failed\n"); |
| return -1; |
| } |
| |
| if (prdt_len < real_prdt_len) { |
| DPRINTF(ad->port_no, "mapped less than expected\n"); |
| r = -1; |
| goto out; |
| } |
| |
| /* Get entries in the PRDT, init a qemu sglist accordingly */ |
| if (sglist_alloc_hint > 0) { |
| AHCI_SG *tbl = (AHCI_SG *)prdt; |
| sum = 0; |
| for (i = 0; i < sglist_alloc_hint; i++) { |
| /* flags_size is zero-based */ |
| tbl_entry_size = prdt_tbl_entry_size(&tbl[i]); |
| if (offset <= (sum + tbl_entry_size)) { |
| off_idx = i; |
| off_pos = offset - sum; |
| break; |
| } |
| sum += tbl_entry_size; |
| } |
| if ((off_idx == -1) || (off_pos < 0) || (off_pos > tbl_entry_size)) { |
| DPRINTF(ad->port_no, "%s: Incorrect offset! " |
| "off_idx: %d, off_pos: %"PRId64"\n", |
| __func__, off_idx, off_pos); |
| r = -1; |
| goto out; |
| } |
| |
| qemu_sglist_init(sglist, qbus->parent, (sglist_alloc_hint - off_idx), |
| ad->hba->as); |
| qemu_sglist_add(sglist, le64_to_cpu(tbl[off_idx].addr + off_pos), |
| prdt_tbl_entry_size(&tbl[off_idx]) - off_pos); |
| |
| for (i = off_idx + 1; i < sglist_alloc_hint; i++) { |
| /* flags_size is zero-based */ |
| qemu_sglist_add(sglist, le64_to_cpu(tbl[i].addr), |
| prdt_tbl_entry_size(&tbl[i])); |
| if (sglist->size > INT32_MAX) { |
| error_report("AHCI Physical Region Descriptor Table describes " |
| "more than 2 GiB.\n"); |
| qemu_sglist_destroy(sglist); |
| r = -1; |
| goto out; |
| } |
| } |
| } |
| |
| out: |
| dma_memory_unmap(ad->hba->as, prdt, prdt_len, |
| DMA_DIRECTION_TO_DEVICE, prdt_len); |
| return r; |
| } |
| |
| static void ncq_cb(void *opaque, int ret) |
| { |
| NCQTransferState *ncq_tfs = (NCQTransferState *)opaque; |
| IDEState *ide_state = &ncq_tfs->drive->port.ifs[0]; |
| |
| if (ret == -ECANCELED) { |
| return; |
| } |
| /* Clear bit for this tag in SActive */ |
| ncq_tfs->drive->port_regs.scr_act &= ~(1 << ncq_tfs->tag); |
| |
| if (ret < 0) { |
| /* error */ |
| ide_state->error = ABRT_ERR; |
| ide_state->status = READY_STAT | ERR_STAT; |
| ncq_tfs->drive->port_regs.scr_err |= (1 << ncq_tfs->tag); |
| } else { |
| ide_state->status = READY_STAT | SEEK_STAT; |
| } |
| |
| ahci_write_fis_sdb(ncq_tfs->drive->hba, ncq_tfs->drive->port_no, |
| (1 << ncq_tfs->tag)); |
| |
| DPRINTF(ncq_tfs->drive->port_no, "NCQ transfer tag %d finished\n", |
| ncq_tfs->tag); |
| |
| block_acct_done(blk_get_stats(ncq_tfs->drive->port.ifs[0].blk), |
| &ncq_tfs->acct); |
| qemu_sglist_destroy(&ncq_tfs->sglist); |
| ncq_tfs->used = 0; |
| } |
| |
| static int is_ncq(uint8_t ata_cmd) |
| { |
| /* Based on SATA 3.2 section 13.6.3.2 */ |
| switch (ata_cmd) { |
| case READ_FPDMA_QUEUED: |
| case WRITE_FPDMA_QUEUED: |
| case NCQ_NON_DATA: |
| case RECEIVE_FPDMA_QUEUED: |
| case SEND_FPDMA_QUEUED: |
| return 1; |
| default: |
| return 0; |
| } |
| } |
| |
| static void process_ncq_command(AHCIState *s, int port, uint8_t *cmd_fis, |
| int slot) |
| { |
| NCQFrame *ncq_fis = (NCQFrame*)cmd_fis; |
| uint8_t tag = ncq_fis->tag >> 3; |
| NCQTransferState *ncq_tfs = &s->dev[port].ncq_tfs[tag]; |
| |
| if (ncq_tfs->used) { |
| /* error - already in use */ |
| fprintf(stderr, "%s: tag %d already used\n", __FUNCTION__, tag); |
| return; |
| } |
| |
| ncq_tfs->used = 1; |
| ncq_tfs->drive = &s->dev[port]; |
| ncq_tfs->slot = slot; |
| ncq_tfs->lba = ((uint64_t)ncq_fis->lba5 << 40) | |
| ((uint64_t)ncq_fis->lba4 << 32) | |
| ((uint64_t)ncq_fis->lba3 << 24) | |
| ((uint64_t)ncq_fis->lba2 << 16) | |
| ((uint64_t)ncq_fis->lba1 << 8) | |
| (uint64_t)ncq_fis->lba0; |
| |
| /* Note: We calculate the sector count, but don't currently rely on it. |
| * The total size of the DMA buffer tells us the transfer size instead. */ |
| ncq_tfs->sector_count = ((uint16_t)ncq_fis->sector_count_high << 8) | |
| ncq_fis->sector_count_low; |
| |
| DPRINTF(port, "NCQ transfer LBA from %"PRId64" to %"PRId64", " |
| "drive max %"PRId64"\n", |
| ncq_tfs->lba, ncq_tfs->lba + ncq_tfs->sector_count - 2, |
| s->dev[port].port.ifs[0].nb_sectors - 1); |
| |
| ahci_populate_sglist(&s->dev[port], &ncq_tfs->sglist, 0); |
| ncq_tfs->tag = tag; |
| |
| switch(ncq_fis->command) { |
| case READ_FPDMA_QUEUED: |
| DPRINTF(port, "NCQ reading %d sectors from LBA %"PRId64", " |
| "tag %d\n", |
| ncq_tfs->sector_count-1, ncq_tfs->lba, ncq_tfs->tag); |
| |
| DPRINTF(port, "tag %d aio read %"PRId64"\n", |
| ncq_tfs->tag, ncq_tfs->lba); |
| |
| dma_acct_start(ncq_tfs->drive->port.ifs[0].blk, &ncq_tfs->acct, |
| &ncq_tfs->sglist, BLOCK_ACCT_READ); |
| ncq_tfs->aiocb = dma_blk_read(ncq_tfs->drive->port.ifs[0].blk, |
| &ncq_tfs->sglist, ncq_tfs->lba, |
| ncq_cb, ncq_tfs); |
| break; |
| case WRITE_FPDMA_QUEUED: |
| DPRINTF(port, "NCQ writing %d sectors to LBA %"PRId64", tag %d\n", |
| ncq_tfs->sector_count-1, ncq_tfs->lba, ncq_tfs->tag); |
| |
| DPRINTF(port, "tag %d aio write %"PRId64"\n", |
| ncq_tfs->tag, ncq_tfs->lba); |
| |
| dma_acct_start(ncq_tfs->drive->port.ifs[0].blk, &ncq_tfs->acct, |
| &ncq_tfs->sglist, BLOCK_ACCT_WRITE); |
| ncq_tfs->aiocb = dma_blk_write(ncq_tfs->drive->port.ifs[0].blk, |
| &ncq_tfs->sglist, ncq_tfs->lba, |
| ncq_cb, ncq_tfs); |
| break; |
| default: |
| if (is_ncq(cmd_fis[2])) { |
| DPRINTF(port, |
| "error: unsupported NCQ command (0x%02x) received\n", |
| cmd_fis[2]); |
| } else { |
| DPRINTF(port, |
| "error: tried to process non-NCQ command as NCQ\n"); |
| } |
| qemu_sglist_destroy(&ncq_tfs->sglist); |
| } |
| } |
| |
| static void handle_reg_h2d_fis(AHCIState *s, int port, |
| int slot, uint8_t *cmd_fis) |
| { |
| IDEState *ide_state = &s->dev[port].port.ifs[0]; |
| AHCICmdHdr *cmd = s->dev[port].cur_cmd; |
| uint32_t opts = le32_to_cpu(cmd->opts); |
| |
| if (cmd_fis[1] & 0x0F) { |
| DPRINTF(port, "Port Multiplier not supported." |
| " cmd_fis[0]=%02x cmd_fis[1]=%02x cmd_fis[2]=%02x\n", |
| cmd_fis[0], cmd_fis[1], cmd_fis[2]); |
| return; |
| } |
| |
| if (cmd_fis[1] & 0x70) { |
| DPRINTF(port, "Reserved flags set in H2D Register FIS." |
| " cmd_fis[0]=%02x cmd_fis[1]=%02x cmd_fis[2]=%02x\n", |
| cmd_fis[0], cmd_fis[1], cmd_fis[2]); |
| return; |
| } |
| |
| if (!(cmd_fis[1] & SATA_FIS_REG_H2D_UPDATE_COMMAND_REGISTER)) { |
| switch (s->dev[port].port_state) { |
| case STATE_RUN: |
| if (cmd_fis[15] & ATA_SRST) { |
| s->dev[port].port_state = STATE_RESET; |
| } |
| break; |
| case STATE_RESET: |
| if (!(cmd_fis[15] & ATA_SRST)) { |
| ahci_reset_port(s, port); |
| } |
| break; |
| } |
| return; |
| } |
| |
| /* Check for NCQ command */ |
| if (is_ncq(cmd_fis[2])) { |
| process_ncq_command(s, port, cmd_fis, slot); |
| return; |
| } |
| |
| /* Decompose the FIS: |
| * AHCI does not interpret FIS packets, it only forwards them. |
| * SATA 1.0 describes how to decode LBA28 and CHS FIS packets. |
| * Later specifications, e.g, SATA 3.2, describe LBA48 FIS packets. |
| * |
| * ATA4 describes sector number for LBA28/CHS commands. |
| * ATA6 describes sector number for LBA48 commands. |
| * ATA8 deprecates CHS fully, describing only LBA28/48. |
| * |
| * We dutifully convert the FIS into IDE registers, and allow the |
| * core layer to interpret them as needed. */ |
| ide_state->feature = cmd_fis[3]; |
| ide_state->sector = cmd_fis[4]; /* LBA 7:0 */ |
| ide_state->lcyl = cmd_fis[5]; /* LBA 15:8 */ |
| ide_state->hcyl = cmd_fis[6]; /* LBA 23:16 */ |
| ide_state->select = cmd_fis[7]; /* LBA 27:24 (LBA28) */ |
| ide_state->hob_sector = cmd_fis[8]; /* LBA 31:24 */ |
| ide_state->hob_lcyl = cmd_fis[9]; /* LBA 39:32 */ |
| ide_state->hob_hcyl = cmd_fis[10]; /* LBA 47:40 */ |
| ide_state->hob_feature = cmd_fis[11]; |
| ide_state->nsector = (int64_t)((cmd_fis[13] << 8) | cmd_fis[12]); |
| /* 14, 16, 17, 18, 19: Reserved (SATA 1.0) */ |
| /* 15: Only valid when UPDATE_COMMAND not set. */ |
| |
| /* Copy the ACMD field (ATAPI packet, if any) from the AHCI command |
| * table to ide_state->io_buffer */ |
| if (opts & AHCI_CMD_ATAPI) { |
| memcpy(ide_state->io_buffer, &cmd_fis[AHCI_COMMAND_TABLE_ACMD], 0x10); |
| debug_print_fis(ide_state->io_buffer, 0x10); |
| s->dev[port].done_atapi_packet = false; |
| /* XXX send PIO setup FIS */ |
| } |
| |
| ide_state->error = 0; |
| |
| /* Reset transferred byte counter */ |
| cmd->status = 0; |
| |
| /* We're ready to process the command in FIS byte 2. */ |
| ide_exec_cmd(&s->dev[port].port, cmd_fis[2]); |
| } |
| |
| static int handle_cmd(AHCIState *s, int port, int slot) |
| { |
| IDEState *ide_state; |
| uint64_t tbl_addr; |
| AHCICmdHdr *cmd; |
| uint8_t *cmd_fis; |
| dma_addr_t cmd_len; |
| |
| if (s->dev[port].port.ifs[0].status & (BUSY_STAT|DRQ_STAT)) { |
| /* Engine currently busy, try again later */ |
| DPRINTF(port, "engine busy\n"); |
| return -1; |
| } |
| |
| if (!s->dev[port].lst) { |
| DPRINTF(port, "error: lst not given but cmd handled"); |
| return -1; |
| } |
| cmd = &((AHCICmdHdr *)s->dev[port].lst)[slot]; |
| /* remember current slot handle for later */ |
| s->dev[port].cur_cmd = cmd; |
| |
| /* The device we are working for */ |
| ide_state = &s->dev[port].port.ifs[0]; |
| if (!ide_state->blk) { |
| DPRINTF(port, "error: guest accessed unused port"); |
| return -1; |
| } |
| |
| tbl_addr = le64_to_cpu(cmd->tbl_addr); |
| cmd_len = 0x80; |
| cmd_fis = dma_memory_map(s->as, tbl_addr, &cmd_len, |
| DMA_DIRECTION_FROM_DEVICE); |
| if (!cmd_fis) { |
| DPRINTF(port, "error: guest passed us an invalid cmd fis\n"); |
| return -1; |
| } else if (cmd_len != 0x80) { |
| ahci_trigger_irq(s, &s->dev[port], PORT_IRQ_HBUS_ERR); |
| DPRINTF(port, "error: dma_memory_map failed: " |
| "(len(%02"PRIx64") != 0x80)\n", |
| cmd_len); |
| goto out; |
| } |
| debug_print_fis(cmd_fis, 0x80); |
| |
| switch (cmd_fis[0]) { |
| case SATA_FIS_TYPE_REGISTER_H2D: |
| handle_reg_h2d_fis(s, port, slot, cmd_fis); |
| break; |
| default: |
| DPRINTF(port, "unknown command cmd_fis[0]=%02x cmd_fis[1]=%02x " |
| "cmd_fis[2]=%02x\n", cmd_fis[0], cmd_fis[1], |
| cmd_fis[2]); |
| break; |
| } |
| |
| out: |
| dma_memory_unmap(s->as, cmd_fis, cmd_len, DMA_DIRECTION_FROM_DEVICE, |
| cmd_len); |
| |
| if (s->dev[port].port.ifs[0].status & (BUSY_STAT|DRQ_STAT)) { |
| /* async command, complete later */ |
| s->dev[port].busy_slot = slot; |
| return -1; |
| } |
| |
| /* done handling the command */ |
| return 0; |
| } |
| |
| /* DMA dev <-> ram */ |
| static void ahci_start_transfer(IDEDMA *dma) |
| { |
| AHCIDevice *ad = DO_UPCAST(AHCIDevice, dma, dma); |
| IDEState *s = &ad->port.ifs[0]; |
| uint32_t size = (uint32_t)(s->data_end - s->data_ptr); |
| /* write == ram -> device */ |
| uint32_t opts = le32_to_cpu(ad->cur_cmd->opts); |
| int is_write = opts & AHCI_CMD_WRITE; |
| int is_atapi = opts & AHCI_CMD_ATAPI; |
| int has_sglist = 0; |
| |
| if (is_atapi && !ad->done_atapi_packet) { |
| /* already prepopulated iobuffer */ |
| ad->done_atapi_packet = true; |
| size = 0; |
| goto out; |
| } |
| |
| if (ahci_dma_prepare_buf(dma, is_write)) { |
| has_sglist = 1; |
| } |
| |
| DPRINTF(ad->port_no, "%sing %d bytes on %s w/%s sglist\n", |
| is_write ? "writ" : "read", size, is_atapi ? "atapi" : "ata", |
| has_sglist ? "" : "o"); |
| |
| if (has_sglist && size) { |
| if (is_write) { |
| dma_buf_write(s->data_ptr, size, &s->sg); |
| } else { |
| dma_buf_read(s->data_ptr, size, &s->sg); |
| } |
| } |
| |
| out: |
| /* declare that we processed everything */ |
| s->data_ptr = s->data_end; |
| |
| /* Update number of transferred bytes, destroy sglist */ |
| ahci_commit_buf(dma, size); |
| |
| s->end_transfer_func(s); |
| |
| if (!(s->status & DRQ_STAT)) { |
| /* done with PIO send/receive */ |
| ahci_write_fis_pio(ad, le32_to_cpu(ad->cur_cmd->status)); |
| } |
| } |
| |
| static void ahci_start_dma(IDEDMA *dma, IDEState *s, |
| BlockCompletionFunc *dma_cb) |
| { |
| #ifdef DEBUG_AHCI |
| AHCIDevice *ad = DO_UPCAST(AHCIDevice, dma, dma); |
| #endif |
| DPRINTF(ad->port_no, "\n"); |
| s->io_buffer_offset = 0; |
| dma_cb(s, 0); |
| } |
| |
| /** |
| * Called in DMA R/W chains to read the PRDT, utilizing ahci_populate_sglist. |
| * Not currently invoked by PIO R/W chains, |
| * which invoke ahci_populate_sglist via ahci_start_transfer. |
| */ |
| static int32_t ahci_dma_prepare_buf(IDEDMA *dma, int is_write) |
| { |
| AHCIDevice *ad = DO_UPCAST(AHCIDevice, dma, dma); |
| IDEState *s = &ad->port.ifs[0]; |
| |
| if (ahci_populate_sglist(ad, &s->sg, s->io_buffer_offset) == -1) { |
| DPRINTF(ad->port_no, "ahci_dma_prepare_buf failed.\n"); |
| return -1; |
| } |
| s->io_buffer_size = s->sg.size; |
| |
| DPRINTF(ad->port_no, "len=%#x\n", s->io_buffer_size); |
| return s->io_buffer_size; |
| } |
| |
| /** |
| * Destroys the scatter-gather list, |
| * and updates the command header with a bytes-read value. |
| * called explicitly via ahci_dma_rw_buf (ATAPI DMA), |
| * and ahci_start_transfer (PIO R/W), |
| * and called via callback from ide_dma_cb for DMA R/W paths. |
| */ |
| static void ahci_commit_buf(IDEDMA *dma, uint32_t tx_bytes) |
| { |
| AHCIDevice *ad = DO_UPCAST(AHCIDevice, dma, dma); |
| IDEState *s = &ad->port.ifs[0]; |
| |
| tx_bytes += le32_to_cpu(ad->cur_cmd->status); |
| ad->cur_cmd->status = cpu_to_le32(tx_bytes); |
| |
| qemu_sglist_destroy(&s->sg); |
| } |
| |
| static int ahci_dma_rw_buf(IDEDMA *dma, int is_write) |
| { |
| AHCIDevice *ad = DO_UPCAST(AHCIDevice, dma, dma); |
| IDEState *s = &ad->port.ifs[0]; |
| uint8_t *p = s->io_buffer + s->io_buffer_index; |
| int l = s->io_buffer_size - s->io_buffer_index; |
| |
| if (ahci_populate_sglist(ad, &s->sg, s->io_buffer_offset)) { |
| return 0; |
| } |
| |
| if (is_write) { |
| dma_buf_read(p, l, &s->sg); |
| } else { |
| dma_buf_write(p, l, &s->sg); |
| } |
| |
| /* free sglist, update byte count */ |
| ahci_commit_buf(dma, l); |
| |
| s->io_buffer_index += l; |
| s->io_buffer_offset += l; |
| |
| DPRINTF(ad->port_no, "len=%#x\n", l); |
| |
| return 1; |
| } |
| |
| static int ahci_dma_set_unit(IDEDMA *dma, int unit) |
| { |
| /* only a single unit per link */ |
| return 0; |
| } |
| |
| static void ahci_cmd_done(IDEDMA *dma) |
| { |
| AHCIDevice *ad = DO_UPCAST(AHCIDevice, dma, dma); |
| |
| DPRINTF(ad->port_no, "cmd done\n"); |
| |
| /* update d2h status */ |
| ahci_write_fis_d2h(ad, NULL); |
| |
| if (!ad->check_bh) { |
| /* maybe we still have something to process, check later */ |
| ad->check_bh = qemu_bh_new(ahci_check_cmd_bh, ad); |
| qemu_bh_schedule(ad->check_bh); |
| } |
| } |
| |
| static void ahci_irq_set(void *opaque, int n, int level) |
| { |
| } |
| |
| static void ahci_dma_restart_cb(void *opaque, int running, RunState state) |
| { |
| } |
| |
| static const IDEDMAOps ahci_dma_ops = { |
| .start_dma = ahci_start_dma, |
| .start_transfer = ahci_start_transfer, |
| .prepare_buf = ahci_dma_prepare_buf, |
| .commit_buf = ahci_commit_buf, |
| .rw_buf = ahci_dma_rw_buf, |
| .set_unit = ahci_dma_set_unit, |
| .cmd_done = ahci_cmd_done, |
| .restart_cb = ahci_dma_restart_cb, |
| }; |
| |
| void ahci_init(AHCIState *s, DeviceState *qdev, AddressSpace *as, int ports) |
| { |
| qemu_irq *irqs; |
| int i; |
| |
| s->as = as; |
| s->ports = ports; |
| s->dev = g_new0(AHCIDevice, ports); |
| ahci_reg_init(s); |
| /* XXX BAR size should be 1k, but that breaks, so bump it to 4k for now */ |
| memory_region_init_io(&s->mem, OBJECT(qdev), &ahci_mem_ops, s, |
| "ahci", AHCI_MEM_BAR_SIZE); |
| memory_region_init_io(&s->idp, OBJECT(qdev), &ahci_idp_ops, s, |
| "ahci-idp", 32); |
| |
| irqs = qemu_allocate_irqs(ahci_irq_set, s, s->ports); |
| |
| for (i = 0; i < s->ports; i++) { |
| AHCIDevice *ad = &s->dev[i]; |
| |
| ide_bus_new(&ad->port, sizeof(ad->port), qdev, i, 1); |
| ide_init2(&ad->port, irqs[i]); |
| |
| ad->hba = s; |
| ad->port_no = i; |
| ad->port.dma = &ad->dma; |
| ad->port.dma->ops = &ahci_dma_ops; |
| } |
| } |
| |
| void ahci_uninit(AHCIState *s) |
| { |
| g_free(s->dev); |
| } |
| |
| void ahci_reset(AHCIState *s) |
| { |
| AHCIPortRegs *pr; |
| int i; |
| |
| s->control_regs.irqstatus = 0; |
| /* AHCI Enable (AE) |
| * The implementation of this bit is dependent upon the value of the |
| * CAP.SAM bit. If CAP.SAM is '0', then GHC.AE shall be read-write and |
| * shall have a reset value of '0'. If CAP.SAM is '1', then AE shall be |
| * read-only and shall have a reset value of '1'. |
| * |
| * We set HOST_CAP_AHCI so we must enable AHCI at reset. |
| */ |
| s->control_regs.ghc = HOST_CTL_AHCI_EN; |
| |
| for (i = 0; i < s->ports; i++) { |
| pr = &s->dev[i].port_regs; |
| pr->irq_stat = 0; |
| pr->irq_mask = 0; |
| pr->scr_ctl = 0; |
| pr->cmd = PORT_CMD_SPIN_UP | PORT_CMD_POWER_ON; |
| ahci_reset_port(s, i); |
| } |
| } |
| |
| static const VMStateDescription vmstate_ahci_device = { |
| .name = "ahci port", |
| .version_id = 1, |
| .fields = (VMStateField[]) { |
| VMSTATE_IDE_BUS(port, AHCIDevice), |
| VMSTATE_UINT32(port_state, AHCIDevice), |
| VMSTATE_UINT32(finished, AHCIDevice), |
| VMSTATE_UINT32(port_regs.lst_addr, AHCIDevice), |
| VMSTATE_UINT32(port_regs.lst_addr_hi, AHCIDevice), |
| VMSTATE_UINT32(port_regs.fis_addr, AHCIDevice), |
| VMSTATE_UINT32(port_regs.fis_addr_hi, AHCIDevice), |
| VMSTATE_UINT32(port_regs.irq_stat, AHCIDevice), |
| VMSTATE_UINT32(port_regs.irq_mask, AHCIDevice), |
| VMSTATE_UINT32(port_regs.cmd, AHCIDevice), |
| VMSTATE_UINT32(port_regs.tfdata, AHCIDevice), |
| VMSTATE_UINT32(port_regs.sig, AHCIDevice), |
| VMSTATE_UINT32(port_regs.scr_stat, AHCIDevice), |
| VMSTATE_UINT32(port_regs.scr_ctl, AHCIDevice), |
| VMSTATE_UINT32(port_regs.scr_err, AHCIDevice), |
| VMSTATE_UINT32(port_regs.scr_act, AHCIDevice), |
| VMSTATE_UINT32(port_regs.cmd_issue, AHCIDevice), |
| VMSTATE_BOOL(done_atapi_packet, AHCIDevice), |
| VMSTATE_INT32(busy_slot, AHCIDevice), |
| VMSTATE_BOOL(init_d2h_sent, AHCIDevice), |
| VMSTATE_END_OF_LIST() |
| }, |
| }; |
| |
| static int ahci_state_post_load(void *opaque, int version_id) |
| { |
| int i; |
| struct AHCIDevice *ad; |
| AHCIState *s = opaque; |
| |
| for (i = 0; i < s->ports; i++) { |
| ad = &s->dev[i]; |
| AHCIPortRegs *pr = &ad->port_regs; |
| |
| map_page(s->as, &ad->lst, |
| ((uint64_t)pr->lst_addr_hi << 32) | pr->lst_addr, 1024); |
| map_page(s->as, &ad->res_fis, |
| ((uint64_t)pr->fis_addr_hi << 32) | pr->fis_addr, 256); |
| /* |
| * All pending i/o should be flushed out on a migrate. However, |
| * we might not have cleared the busy_slot since this is done |
| * in a bh. Also, issue i/o against any slots that are pending. |
| */ |
| if ((ad->busy_slot != -1) && |
| !(ad->port.ifs[0].status & (BUSY_STAT|DRQ_STAT))) { |
| pr->cmd_issue &= ~(1 << ad->busy_slot); |
| ad->busy_slot = -1; |
| } |
| check_cmd(s, i); |
| } |
| |
| return 0; |
| } |
| |
| const VMStateDescription vmstate_ahci = { |
| .name = "ahci", |
| .version_id = 1, |
| .post_load = ahci_state_post_load, |
| .fields = (VMStateField[]) { |
| VMSTATE_STRUCT_VARRAY_POINTER_INT32(dev, AHCIState, ports, |
| vmstate_ahci_device, AHCIDevice), |
| VMSTATE_UINT32(control_regs.cap, AHCIState), |
| VMSTATE_UINT32(control_regs.ghc, AHCIState), |
| VMSTATE_UINT32(control_regs.irqstatus, AHCIState), |
| VMSTATE_UINT32(control_regs.impl, AHCIState), |
| VMSTATE_UINT32(control_regs.version, AHCIState), |
| VMSTATE_UINT32(idp_index, AHCIState), |
| VMSTATE_INT32_EQUAL(ports, AHCIState), |
| VMSTATE_END_OF_LIST() |
| }, |
| }; |
| |
| #define TYPE_SYSBUS_AHCI "sysbus-ahci" |
| #define SYSBUS_AHCI(obj) OBJECT_CHECK(SysbusAHCIState, (obj), TYPE_SYSBUS_AHCI) |
| |
| typedef struct SysbusAHCIState { |
| /*< private >*/ |
| SysBusDevice parent_obj; |
| /*< public >*/ |
| |
| AHCIState ahci; |
| uint32_t num_ports; |
| } SysbusAHCIState; |
| |
| static const VMStateDescription vmstate_sysbus_ahci = { |
| .name = "sysbus-ahci", |
| .unmigratable = 1, /* Still buggy under I/O load */ |
| .fields = (VMStateField[]) { |
| VMSTATE_AHCI(ahci, SysbusAHCIState), |
| VMSTATE_END_OF_LIST() |
| }, |
| }; |
| |
| static void sysbus_ahci_reset(DeviceState *dev) |
| { |
| SysbusAHCIState *s = SYSBUS_AHCI(dev); |
| |
| ahci_reset(&s->ahci); |
| } |
| |
| static void sysbus_ahci_realize(DeviceState *dev, Error **errp) |
| { |
| SysBusDevice *sbd = SYS_BUS_DEVICE(dev); |
| SysbusAHCIState *s = SYSBUS_AHCI(dev); |
| |
| ahci_init(&s->ahci, dev, &address_space_memory, s->num_ports); |
| |
| sysbus_init_mmio(sbd, &s->ahci.mem); |
| sysbus_init_irq(sbd, &s->ahci.irq); |
| } |
| |
| static Property sysbus_ahci_properties[] = { |
| DEFINE_PROP_UINT32("num-ports", SysbusAHCIState, num_ports, 1), |
| DEFINE_PROP_END_OF_LIST(), |
| }; |
| |
| static void sysbus_ahci_class_init(ObjectClass *klass, void *data) |
| { |
| DeviceClass *dc = DEVICE_CLASS(klass); |
| |
| dc->realize = sysbus_ahci_realize; |
| dc->vmsd = &vmstate_sysbus_ahci; |
| dc->props = sysbus_ahci_properties; |
| dc->reset = sysbus_ahci_reset; |
| set_bit(DEVICE_CATEGORY_STORAGE, dc->categories); |
| } |
| |
| static const TypeInfo sysbus_ahci_info = { |
| .name = TYPE_SYSBUS_AHCI, |
| .parent = TYPE_SYS_BUS_DEVICE, |
| .instance_size = sizeof(SysbusAHCIState), |
| .class_init = sysbus_ahci_class_init, |
| }; |
| |
| static void sysbus_ahci_register_types(void) |
| { |
| type_register_static(&sysbus_ahci_info); |
| } |
| |
| type_init(sysbus_ahci_register_types) |
| |
| void ahci_ide_create_devs(PCIDevice *dev, DriveInfo **hd) |
| { |
| AHCIPCIState *d = ICH_AHCI(dev); |
| AHCIState *ahci = &d->ahci; |
| int i; |
| |
| for (i = 0; i < ahci->ports; i++) { |
| if (hd[i] == NULL) { |
| continue; |
| } |
| ide_create_drive(&ahci->dev[i].port, 0, hd[i]); |
| } |
| |
| } |