|  | /* | 
|  | * QEMU PC System Emulator | 
|  | * | 
|  | * Copyright (c) 2003-2004 Fabrice Bellard | 
|  | * | 
|  | * Permission is hereby granted, free of charge, to any person obtaining a copy | 
|  | * of this software and associated documentation files (the "Software"), to deal | 
|  | * in the Software without restriction, including without limitation the rights | 
|  | * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell | 
|  | * copies of the Software, and to permit persons to whom the Software is | 
|  | * furnished to do so, subject to the following conditions: | 
|  | * | 
|  | * The above copyright notice and this permission notice shall be included in | 
|  | * all copies or substantial portions of the Software. | 
|  | * | 
|  | * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR | 
|  | * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, | 
|  | * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL | 
|  | * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER | 
|  | * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, | 
|  | * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN | 
|  | * THE SOFTWARE. | 
|  | */ | 
|  | #include "hw.h" | 
|  | #include "pc.h" | 
|  | #include "serial.h" | 
|  | #include "apic.h" | 
|  | #include "fdc.h" | 
|  | #include "ide.h" | 
|  | #include "pci/pci.h" | 
|  | #include "monitor/monitor.h" | 
|  | #include "fw_cfg.h" | 
|  | #include "hpet_emul.h" | 
|  | #include "smbios.h" | 
|  | #include "loader.h" | 
|  | #include "elf.h" | 
|  | #include "multiboot.h" | 
|  | #include "mc146818rtc.h" | 
|  | #include "i8254.h" | 
|  | #include "pcspk.h" | 
|  | #include "pci/msi.h" | 
|  | #include "sysbus.h" | 
|  | #include "sysemu/sysemu.h" | 
|  | #include "sysemu/kvm.h" | 
|  | #include "kvm_i386.h" | 
|  | #include "xen.h" | 
|  | #include "sysemu/blockdev.h" | 
|  | #include "hw/block-common.h" | 
|  | #include "ui/qemu-spice.h" | 
|  | #include "exec/memory.h" | 
|  | #include "exec/address-spaces.h" | 
|  | #include "sysemu/arch_init.h" | 
|  | #include "qemu/bitmap.h" | 
|  |  | 
|  | /* debug PC/ISA interrupts */ | 
|  | //#define DEBUG_IRQ | 
|  |  | 
|  | #ifdef DEBUG_IRQ | 
|  | #define DPRINTF(fmt, ...)                                       \ | 
|  | do { printf("CPUIRQ: " fmt , ## __VA_ARGS__); } while (0) | 
|  | #else | 
|  | #define DPRINTF(fmt, ...) | 
|  | #endif | 
|  |  | 
|  | /* Leave a chunk of memory at the top of RAM for the BIOS ACPI tables.  */ | 
|  | #define ACPI_DATA_SIZE       0x10000 | 
|  | #define BIOS_CFG_IOPORT 0x510 | 
|  | #define FW_CFG_ACPI_TABLES (FW_CFG_ARCH_LOCAL + 0) | 
|  | #define FW_CFG_SMBIOS_ENTRIES (FW_CFG_ARCH_LOCAL + 1) | 
|  | #define FW_CFG_IRQ0_OVERRIDE (FW_CFG_ARCH_LOCAL + 2) | 
|  | #define FW_CFG_E820_TABLE (FW_CFG_ARCH_LOCAL + 3) | 
|  | #define FW_CFG_HPET (FW_CFG_ARCH_LOCAL + 4) | 
|  |  | 
|  | #define E820_NR_ENTRIES		16 | 
|  |  | 
|  | struct e820_entry { | 
|  | uint64_t address; | 
|  | uint64_t length; | 
|  | uint32_t type; | 
|  | } QEMU_PACKED __attribute((__aligned__(4))); | 
|  |  | 
|  | struct e820_table { | 
|  | uint32_t count; | 
|  | struct e820_entry entry[E820_NR_ENTRIES]; | 
|  | } QEMU_PACKED __attribute((__aligned__(4))); | 
|  |  | 
|  | static struct e820_table e820_table; | 
|  | struct hpet_fw_config hpet_cfg = {.count = UINT8_MAX}; | 
|  |  | 
|  | void gsi_handler(void *opaque, int n, int level) | 
|  | { | 
|  | GSIState *s = opaque; | 
|  |  | 
|  | DPRINTF("pc: %s GSI %d\n", level ? "raising" : "lowering", n); | 
|  | if (n < ISA_NUM_IRQS) { | 
|  | qemu_set_irq(s->i8259_irq[n], level); | 
|  | } | 
|  | qemu_set_irq(s->ioapic_irq[n], level); | 
|  | } | 
|  |  | 
|  | static void ioport80_write(void *opaque, hwaddr addr, uint64_t data, | 
|  | unsigned size) | 
|  | { | 
|  | } | 
|  |  | 
|  | static uint64_t ioport80_read(void *opaque, hwaddr addr, unsigned size) | 
|  | { | 
|  | return 0xffffffffffffffffULL; | 
|  | } | 
|  |  | 
|  | /* MSDOS compatibility mode FPU exception support */ | 
|  | static qemu_irq ferr_irq; | 
|  |  | 
|  | void pc_register_ferr_irq(qemu_irq irq) | 
|  | { | 
|  | ferr_irq = irq; | 
|  | } | 
|  |  | 
|  | /* XXX: add IGNNE support */ | 
|  | void cpu_set_ferr(CPUX86State *s) | 
|  | { | 
|  | qemu_irq_raise(ferr_irq); | 
|  | } | 
|  |  | 
|  | static void ioportF0_write(void *opaque, hwaddr addr, uint64_t data, | 
|  | unsigned size) | 
|  | { | 
|  | qemu_irq_lower(ferr_irq); | 
|  | } | 
|  |  | 
|  | static uint64_t ioportF0_read(void *opaque, hwaddr addr, unsigned size) | 
|  | { | 
|  | return 0xffffffffffffffffULL; | 
|  | } | 
|  |  | 
|  | /* TSC handling */ | 
|  | uint64_t cpu_get_tsc(CPUX86State *env) | 
|  | { | 
|  | return cpu_get_ticks(); | 
|  | } | 
|  |  | 
|  | /* SMM support */ | 
|  |  | 
|  | static cpu_set_smm_t smm_set; | 
|  | static void *smm_arg; | 
|  |  | 
|  | void cpu_smm_register(cpu_set_smm_t callback, void *arg) | 
|  | { | 
|  | assert(smm_set == NULL); | 
|  | assert(smm_arg == NULL); | 
|  | smm_set = callback; | 
|  | smm_arg = arg; | 
|  | } | 
|  |  | 
|  | void cpu_smm_update(CPUX86State *env) | 
|  | { | 
|  | if (smm_set && smm_arg && env == first_cpu) | 
|  | smm_set(!!(env->hflags & HF_SMM_MASK), smm_arg); | 
|  | } | 
|  |  | 
|  |  | 
|  | /* IRQ handling */ | 
|  | int cpu_get_pic_interrupt(CPUX86State *env) | 
|  | { | 
|  | int intno; | 
|  |  | 
|  | intno = apic_get_interrupt(env->apic_state); | 
|  | if (intno >= 0) { | 
|  | return intno; | 
|  | } | 
|  | /* read the irq from the PIC */ | 
|  | if (!apic_accept_pic_intr(env->apic_state)) { | 
|  | return -1; | 
|  | } | 
|  |  | 
|  | intno = pic_read_irq(isa_pic); | 
|  | return intno; | 
|  | } | 
|  |  | 
|  | static void pic_irq_request(void *opaque, int irq, int level) | 
|  | { | 
|  | CPUX86State *env = first_cpu; | 
|  |  | 
|  | DPRINTF("pic_irqs: %s irq %d\n", level? "raise" : "lower", irq); | 
|  | if (env->apic_state) { | 
|  | while (env) { | 
|  | if (apic_accept_pic_intr(env->apic_state)) { | 
|  | apic_deliver_pic_intr(env->apic_state, level); | 
|  | } | 
|  | env = env->next_cpu; | 
|  | } | 
|  | } else { | 
|  | if (level) | 
|  | cpu_interrupt(env, CPU_INTERRUPT_HARD); | 
|  | else | 
|  | cpu_reset_interrupt(env, CPU_INTERRUPT_HARD); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* PC cmos mappings */ | 
|  |  | 
|  | #define REG_EQUIPMENT_BYTE          0x14 | 
|  |  | 
|  | static int cmos_get_fd_drive_type(FDriveType fd0) | 
|  | { | 
|  | int val; | 
|  |  | 
|  | switch (fd0) { | 
|  | case FDRIVE_DRV_144: | 
|  | /* 1.44 Mb 3"5 drive */ | 
|  | val = 4; | 
|  | break; | 
|  | case FDRIVE_DRV_288: | 
|  | /* 2.88 Mb 3"5 drive */ | 
|  | val = 5; | 
|  | break; | 
|  | case FDRIVE_DRV_120: | 
|  | /* 1.2 Mb 5"5 drive */ | 
|  | val = 2; | 
|  | break; | 
|  | case FDRIVE_DRV_NONE: | 
|  | default: | 
|  | val = 0; | 
|  | break; | 
|  | } | 
|  | return val; | 
|  | } | 
|  |  | 
|  | static void cmos_init_hd(ISADevice *s, int type_ofs, int info_ofs, | 
|  | int16_t cylinders, int8_t heads, int8_t sectors) | 
|  | { | 
|  | rtc_set_memory(s, type_ofs, 47); | 
|  | rtc_set_memory(s, info_ofs, cylinders); | 
|  | rtc_set_memory(s, info_ofs + 1, cylinders >> 8); | 
|  | rtc_set_memory(s, info_ofs + 2, heads); | 
|  | rtc_set_memory(s, info_ofs + 3, 0xff); | 
|  | rtc_set_memory(s, info_ofs + 4, 0xff); | 
|  | rtc_set_memory(s, info_ofs + 5, 0xc0 | ((heads > 8) << 3)); | 
|  | rtc_set_memory(s, info_ofs + 6, cylinders); | 
|  | rtc_set_memory(s, info_ofs + 7, cylinders >> 8); | 
|  | rtc_set_memory(s, info_ofs + 8, sectors); | 
|  | } | 
|  |  | 
|  | /* convert boot_device letter to something recognizable by the bios */ | 
|  | static int boot_device2nibble(char boot_device) | 
|  | { | 
|  | switch(boot_device) { | 
|  | case 'a': | 
|  | case 'b': | 
|  | return 0x01; /* floppy boot */ | 
|  | case 'c': | 
|  | return 0x02; /* hard drive boot */ | 
|  | case 'd': | 
|  | return 0x03; /* CD-ROM boot */ | 
|  | case 'n': | 
|  | return 0x04; /* Network boot */ | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int set_boot_dev(ISADevice *s, const char *boot_device, int fd_bootchk) | 
|  | { | 
|  | #define PC_MAX_BOOT_DEVICES 3 | 
|  | int nbds, bds[3] = { 0, }; | 
|  | int i; | 
|  |  | 
|  | nbds = strlen(boot_device); | 
|  | if (nbds > PC_MAX_BOOT_DEVICES) { | 
|  | error_report("Too many boot devices for PC"); | 
|  | return(1); | 
|  | } | 
|  | for (i = 0; i < nbds; i++) { | 
|  | bds[i] = boot_device2nibble(boot_device[i]); | 
|  | if (bds[i] == 0) { | 
|  | error_report("Invalid boot device for PC: '%c'", | 
|  | boot_device[i]); | 
|  | return(1); | 
|  | } | 
|  | } | 
|  | rtc_set_memory(s, 0x3d, (bds[1] << 4) | bds[0]); | 
|  | rtc_set_memory(s, 0x38, (bds[2] << 4) | (fd_bootchk ? 0x0 : 0x1)); | 
|  | return(0); | 
|  | } | 
|  |  | 
|  | static int pc_boot_set(void *opaque, const char *boot_device) | 
|  | { | 
|  | return set_boot_dev(opaque, boot_device, 0); | 
|  | } | 
|  |  | 
|  | typedef struct pc_cmos_init_late_arg { | 
|  | ISADevice *rtc_state; | 
|  | BusState *idebus[2]; | 
|  | } pc_cmos_init_late_arg; | 
|  |  | 
|  | static void pc_cmos_init_late(void *opaque) | 
|  | { | 
|  | pc_cmos_init_late_arg *arg = opaque; | 
|  | ISADevice *s = arg->rtc_state; | 
|  | int16_t cylinders; | 
|  | int8_t heads, sectors; | 
|  | int val; | 
|  | int i, trans; | 
|  |  | 
|  | val = 0; | 
|  | if (ide_get_geometry(arg->idebus[0], 0, | 
|  | &cylinders, &heads, §ors) >= 0) { | 
|  | cmos_init_hd(s, 0x19, 0x1b, cylinders, heads, sectors); | 
|  | val |= 0xf0; | 
|  | } | 
|  | if (ide_get_geometry(arg->idebus[0], 1, | 
|  | &cylinders, &heads, §ors) >= 0) { | 
|  | cmos_init_hd(s, 0x1a, 0x24, cylinders, heads, sectors); | 
|  | val |= 0x0f; | 
|  | } | 
|  | rtc_set_memory(s, 0x12, val); | 
|  |  | 
|  | val = 0; | 
|  | for (i = 0; i < 4; i++) { | 
|  | /* NOTE: ide_get_geometry() returns the physical | 
|  | geometry.  It is always such that: 1 <= sects <= 63, 1 | 
|  | <= heads <= 16, 1 <= cylinders <= 16383. The BIOS | 
|  | geometry can be different if a translation is done. */ | 
|  | if (ide_get_geometry(arg->idebus[i / 2], i % 2, | 
|  | &cylinders, &heads, §ors) >= 0) { | 
|  | trans = ide_get_bios_chs_trans(arg->idebus[i / 2], i % 2) - 1; | 
|  | assert((trans & ~3) == 0); | 
|  | val |= trans << (i * 2); | 
|  | } | 
|  | } | 
|  | rtc_set_memory(s, 0x39, val); | 
|  |  | 
|  | qemu_unregister_reset(pc_cmos_init_late, opaque); | 
|  | } | 
|  |  | 
|  | void pc_cmos_init(ram_addr_t ram_size, ram_addr_t above_4g_mem_size, | 
|  | const char *boot_device, | 
|  | ISADevice *floppy, BusState *idebus0, BusState *idebus1, | 
|  | ISADevice *s) | 
|  | { | 
|  | int val, nb, i; | 
|  | FDriveType fd_type[2] = { FDRIVE_DRV_NONE, FDRIVE_DRV_NONE }; | 
|  | static pc_cmos_init_late_arg arg; | 
|  |  | 
|  | /* various important CMOS locations needed by PC/Bochs bios */ | 
|  |  | 
|  | /* memory size */ | 
|  | /* base memory (first MiB) */ | 
|  | val = MIN(ram_size / 1024, 640); | 
|  | rtc_set_memory(s, 0x15, val); | 
|  | rtc_set_memory(s, 0x16, val >> 8); | 
|  | /* extended memory (next 64MiB) */ | 
|  | if (ram_size > 1024 * 1024) { | 
|  | val = (ram_size - 1024 * 1024) / 1024; | 
|  | } else { | 
|  | val = 0; | 
|  | } | 
|  | if (val > 65535) | 
|  | val = 65535; | 
|  | rtc_set_memory(s, 0x17, val); | 
|  | rtc_set_memory(s, 0x18, val >> 8); | 
|  | rtc_set_memory(s, 0x30, val); | 
|  | rtc_set_memory(s, 0x31, val >> 8); | 
|  | /* memory between 16MiB and 4GiB */ | 
|  | if (ram_size > 16 * 1024 * 1024) { | 
|  | val = (ram_size - 16 * 1024 * 1024) / 65536; | 
|  | } else { | 
|  | val = 0; | 
|  | } | 
|  | if (val > 65535) | 
|  | val = 65535; | 
|  | rtc_set_memory(s, 0x34, val); | 
|  | rtc_set_memory(s, 0x35, val >> 8); | 
|  | /* memory above 4GiB */ | 
|  | val = above_4g_mem_size / 65536; | 
|  | rtc_set_memory(s, 0x5b, val); | 
|  | rtc_set_memory(s, 0x5c, val >> 8); | 
|  | rtc_set_memory(s, 0x5d, val >> 16); | 
|  |  | 
|  | /* set the number of CPU */ | 
|  | rtc_set_memory(s, 0x5f, smp_cpus - 1); | 
|  |  | 
|  | /* set boot devices, and disable floppy signature check if requested */ | 
|  | if (set_boot_dev(s, boot_device, fd_bootchk)) { | 
|  | exit(1); | 
|  | } | 
|  |  | 
|  | /* floppy type */ | 
|  | if (floppy) { | 
|  | for (i = 0; i < 2; i++) { | 
|  | fd_type[i] = isa_fdc_get_drive_type(floppy, i); | 
|  | } | 
|  | } | 
|  | val = (cmos_get_fd_drive_type(fd_type[0]) << 4) | | 
|  | cmos_get_fd_drive_type(fd_type[1]); | 
|  | rtc_set_memory(s, 0x10, val); | 
|  |  | 
|  | val = 0; | 
|  | nb = 0; | 
|  | if (fd_type[0] < FDRIVE_DRV_NONE) { | 
|  | nb++; | 
|  | } | 
|  | if (fd_type[1] < FDRIVE_DRV_NONE) { | 
|  | nb++; | 
|  | } | 
|  | switch (nb) { | 
|  | case 0: | 
|  | break; | 
|  | case 1: | 
|  | val |= 0x01; /* 1 drive, ready for boot */ | 
|  | break; | 
|  | case 2: | 
|  | val |= 0x41; /* 2 drives, ready for boot */ | 
|  | break; | 
|  | } | 
|  | val |= 0x02; /* FPU is there */ | 
|  | val |= 0x04; /* PS/2 mouse installed */ | 
|  | rtc_set_memory(s, REG_EQUIPMENT_BYTE, val); | 
|  |  | 
|  | /* hard drives */ | 
|  | arg.rtc_state = s; | 
|  | arg.idebus[0] = idebus0; | 
|  | arg.idebus[1] = idebus1; | 
|  | qemu_register_reset(pc_cmos_init_late, &arg); | 
|  | } | 
|  |  | 
|  | /* port 92 stuff: could be split off */ | 
|  | typedef struct Port92State { | 
|  | ISADevice dev; | 
|  | MemoryRegion io; | 
|  | uint8_t outport; | 
|  | qemu_irq *a20_out; | 
|  | } Port92State; | 
|  |  | 
|  | static void port92_write(void *opaque, hwaddr addr, uint64_t val, | 
|  | unsigned size) | 
|  | { | 
|  | Port92State *s = opaque; | 
|  |  | 
|  | DPRINTF("port92: write 0x%02x\n", val); | 
|  | s->outport = val; | 
|  | qemu_set_irq(*s->a20_out, (val >> 1) & 1); | 
|  | if (val & 1) { | 
|  | qemu_system_reset_request(); | 
|  | } | 
|  | } | 
|  |  | 
|  | static uint64_t port92_read(void *opaque, hwaddr addr, | 
|  | unsigned size) | 
|  | { | 
|  | Port92State *s = opaque; | 
|  | uint32_t ret; | 
|  |  | 
|  | ret = s->outport; | 
|  | DPRINTF("port92: read 0x%02x\n", ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static void port92_init(ISADevice *dev, qemu_irq *a20_out) | 
|  | { | 
|  | Port92State *s = DO_UPCAST(Port92State, dev, dev); | 
|  |  | 
|  | s->a20_out = a20_out; | 
|  | } | 
|  |  | 
|  | static const VMStateDescription vmstate_port92_isa = { | 
|  | .name = "port92", | 
|  | .version_id = 1, | 
|  | .minimum_version_id = 1, | 
|  | .minimum_version_id_old = 1, | 
|  | .fields      = (VMStateField []) { | 
|  | VMSTATE_UINT8(outport, Port92State), | 
|  | VMSTATE_END_OF_LIST() | 
|  | } | 
|  | }; | 
|  |  | 
|  | static void port92_reset(DeviceState *d) | 
|  | { | 
|  | Port92State *s = container_of(d, Port92State, dev.qdev); | 
|  |  | 
|  | s->outport &= ~1; | 
|  | } | 
|  |  | 
|  | static const MemoryRegionOps port92_ops = { | 
|  | .read = port92_read, | 
|  | .write = port92_write, | 
|  | .impl = { | 
|  | .min_access_size = 1, | 
|  | .max_access_size = 1, | 
|  | }, | 
|  | .endianness = DEVICE_LITTLE_ENDIAN, | 
|  | }; | 
|  |  | 
|  | static int port92_initfn(ISADevice *dev) | 
|  | { | 
|  | Port92State *s = DO_UPCAST(Port92State, dev, dev); | 
|  |  | 
|  | memory_region_init_io(&s->io, &port92_ops, s, "port92", 1); | 
|  | isa_register_ioport(dev, &s->io, 0x92); | 
|  |  | 
|  | s->outport = 0; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void port92_class_initfn(ObjectClass *klass, void *data) | 
|  | { | 
|  | DeviceClass *dc = DEVICE_CLASS(klass); | 
|  | ISADeviceClass *ic = ISA_DEVICE_CLASS(klass); | 
|  | ic->init = port92_initfn; | 
|  | dc->no_user = 1; | 
|  | dc->reset = port92_reset; | 
|  | dc->vmsd = &vmstate_port92_isa; | 
|  | } | 
|  |  | 
|  | static const TypeInfo port92_info = { | 
|  | .name          = "port92", | 
|  | .parent        = TYPE_ISA_DEVICE, | 
|  | .instance_size = sizeof(Port92State), | 
|  | .class_init    = port92_class_initfn, | 
|  | }; | 
|  |  | 
|  | static void port92_register_types(void) | 
|  | { | 
|  | type_register_static(&port92_info); | 
|  | } | 
|  |  | 
|  | type_init(port92_register_types) | 
|  |  | 
|  | static void handle_a20_line_change(void *opaque, int irq, int level) | 
|  | { | 
|  | X86CPU *cpu = opaque; | 
|  |  | 
|  | /* XXX: send to all CPUs ? */ | 
|  | /* XXX: add logic to handle multiple A20 line sources */ | 
|  | x86_cpu_set_a20(cpu, level); | 
|  | } | 
|  |  | 
|  | int e820_add_entry(uint64_t address, uint64_t length, uint32_t type) | 
|  | { | 
|  | int index = le32_to_cpu(e820_table.count); | 
|  | struct e820_entry *entry; | 
|  |  | 
|  | if (index >= E820_NR_ENTRIES) | 
|  | return -EBUSY; | 
|  | entry = &e820_table.entry[index++]; | 
|  |  | 
|  | entry->address = cpu_to_le64(address); | 
|  | entry->length = cpu_to_le64(length); | 
|  | entry->type = cpu_to_le32(type); | 
|  |  | 
|  | e820_table.count = cpu_to_le32(index); | 
|  | return index; | 
|  | } | 
|  |  | 
|  | /* Calculates the limit to CPU APIC ID values | 
|  | * | 
|  | * This function returns the limit for the APIC ID value, so that all | 
|  | * CPU APIC IDs are < pc_apic_id_limit(). | 
|  | * | 
|  | * This is used for FW_CFG_MAX_CPUS. See comments on bochs_bios_init(). | 
|  | */ | 
|  | static unsigned int pc_apic_id_limit(unsigned int max_cpus) | 
|  | { | 
|  | return x86_cpu_apic_id_from_index(max_cpus - 1) + 1; | 
|  | } | 
|  |  | 
|  | static void *bochs_bios_init(void) | 
|  | { | 
|  | void *fw_cfg; | 
|  | uint8_t *smbios_table; | 
|  | size_t smbios_len; | 
|  | uint64_t *numa_fw_cfg; | 
|  | int i, j; | 
|  | unsigned int apic_id_limit = pc_apic_id_limit(max_cpus); | 
|  |  | 
|  | fw_cfg = fw_cfg_init(BIOS_CFG_IOPORT, BIOS_CFG_IOPORT + 1, 0, 0); | 
|  | /* FW_CFG_MAX_CPUS is a bit confusing/problematic on x86: | 
|  | * | 
|  | * SeaBIOS needs FW_CFG_MAX_CPUS for CPU hotplug, but the CPU hotplug | 
|  | * QEMU<->SeaBIOS interface is not based on the "CPU index", but on the APIC | 
|  | * ID of hotplugged CPUs[1]. This means that FW_CFG_MAX_CPUS is not the | 
|  | * "maximum number of CPUs", but the "limit to the APIC ID values SeaBIOS | 
|  | * may see". | 
|  | * | 
|  | * So, this means we must not use max_cpus, here, but the maximum possible | 
|  | * APIC ID value, plus one. | 
|  | * | 
|  | * [1] The only kind of "CPU identifier" used between SeaBIOS and QEMU is | 
|  | *     the APIC ID, not the "CPU index" | 
|  | */ | 
|  | fw_cfg_add_i16(fw_cfg, FW_CFG_MAX_CPUS, (uint16_t)apic_id_limit); | 
|  | fw_cfg_add_i32(fw_cfg, FW_CFG_ID, 1); | 
|  | fw_cfg_add_i64(fw_cfg, FW_CFG_RAM_SIZE, (uint64_t)ram_size); | 
|  | fw_cfg_add_bytes(fw_cfg, FW_CFG_ACPI_TABLES, | 
|  | acpi_tables, acpi_tables_len); | 
|  | fw_cfg_add_i32(fw_cfg, FW_CFG_IRQ0_OVERRIDE, kvm_allows_irq0_override()); | 
|  |  | 
|  | smbios_table = smbios_get_table(&smbios_len); | 
|  | if (smbios_table) | 
|  | fw_cfg_add_bytes(fw_cfg, FW_CFG_SMBIOS_ENTRIES, | 
|  | smbios_table, smbios_len); | 
|  | fw_cfg_add_bytes(fw_cfg, FW_CFG_E820_TABLE, | 
|  | &e820_table, sizeof(e820_table)); | 
|  |  | 
|  | fw_cfg_add_bytes(fw_cfg, FW_CFG_HPET, &hpet_cfg, sizeof(hpet_cfg)); | 
|  | /* allocate memory for the NUMA channel: one (64bit) word for the number | 
|  | * of nodes, one word for each VCPU->node and one word for each node to | 
|  | * hold the amount of memory. | 
|  | */ | 
|  | numa_fw_cfg = g_new0(uint64_t, 1 + apic_id_limit + nb_numa_nodes); | 
|  | numa_fw_cfg[0] = cpu_to_le64(nb_numa_nodes); | 
|  | for (i = 0; i < max_cpus; i++) { | 
|  | unsigned int apic_id = x86_cpu_apic_id_from_index(i); | 
|  | assert(apic_id < apic_id_limit); | 
|  | for (j = 0; j < nb_numa_nodes; j++) { | 
|  | if (test_bit(i, node_cpumask[j])) { | 
|  | numa_fw_cfg[apic_id + 1] = cpu_to_le64(j); | 
|  | break; | 
|  | } | 
|  | } | 
|  | } | 
|  | for (i = 0; i < nb_numa_nodes; i++) { | 
|  | numa_fw_cfg[apic_id_limit + 1 + i] = cpu_to_le64(node_mem[i]); | 
|  | } | 
|  | fw_cfg_add_bytes(fw_cfg, FW_CFG_NUMA, numa_fw_cfg, | 
|  | (1 + apic_id_limit + nb_numa_nodes) * | 
|  | sizeof(*numa_fw_cfg)); | 
|  |  | 
|  | return fw_cfg; | 
|  | } | 
|  |  | 
|  | static long get_file_size(FILE *f) | 
|  | { | 
|  | long where, size; | 
|  |  | 
|  | /* XXX: on Unix systems, using fstat() probably makes more sense */ | 
|  |  | 
|  | where = ftell(f); | 
|  | fseek(f, 0, SEEK_END); | 
|  | size = ftell(f); | 
|  | fseek(f, where, SEEK_SET); | 
|  |  | 
|  | return size; | 
|  | } | 
|  |  | 
|  | static void load_linux(void *fw_cfg, | 
|  | const char *kernel_filename, | 
|  | const char *initrd_filename, | 
|  | const char *kernel_cmdline, | 
|  | hwaddr max_ram_size) | 
|  | { | 
|  | uint16_t protocol; | 
|  | int setup_size, kernel_size, initrd_size = 0, cmdline_size; | 
|  | uint32_t initrd_max; | 
|  | uint8_t header[8192], *setup, *kernel, *initrd_data; | 
|  | hwaddr real_addr, prot_addr, cmdline_addr, initrd_addr = 0; | 
|  | FILE *f; | 
|  | char *vmode; | 
|  |  | 
|  | /* Align to 16 bytes as a paranoia measure */ | 
|  | cmdline_size = (strlen(kernel_cmdline)+16) & ~15; | 
|  |  | 
|  | /* load the kernel header */ | 
|  | f = fopen(kernel_filename, "rb"); | 
|  | if (!f || !(kernel_size = get_file_size(f)) || | 
|  | fread(header, 1, MIN(ARRAY_SIZE(header), kernel_size), f) != | 
|  | MIN(ARRAY_SIZE(header), kernel_size)) { | 
|  | fprintf(stderr, "qemu: could not load kernel '%s': %s\n", | 
|  | kernel_filename, strerror(errno)); | 
|  | exit(1); | 
|  | } | 
|  |  | 
|  | /* kernel protocol version */ | 
|  | #if 0 | 
|  | fprintf(stderr, "header magic: %#x\n", ldl_p(header+0x202)); | 
|  | #endif | 
|  | if (ldl_p(header+0x202) == 0x53726448) | 
|  | protocol = lduw_p(header+0x206); | 
|  | else { | 
|  | /* This looks like a multiboot kernel. If it is, let's stop | 
|  | treating it like a Linux kernel. */ | 
|  | if (load_multiboot(fw_cfg, f, kernel_filename, initrd_filename, | 
|  | kernel_cmdline, kernel_size, header)) | 
|  | return; | 
|  | protocol = 0; | 
|  | } | 
|  |  | 
|  | if (protocol < 0x200 || !(header[0x211] & 0x01)) { | 
|  | /* Low kernel */ | 
|  | real_addr    = 0x90000; | 
|  | cmdline_addr = 0x9a000 - cmdline_size; | 
|  | prot_addr    = 0x10000; | 
|  | } else if (protocol < 0x202) { | 
|  | /* High but ancient kernel */ | 
|  | real_addr    = 0x90000; | 
|  | cmdline_addr = 0x9a000 - cmdline_size; | 
|  | prot_addr    = 0x100000; | 
|  | } else { | 
|  | /* High and recent kernel */ | 
|  | real_addr    = 0x10000; | 
|  | cmdline_addr = 0x20000; | 
|  | prot_addr    = 0x100000; | 
|  | } | 
|  |  | 
|  | #if 0 | 
|  | fprintf(stderr, | 
|  | "qemu: real_addr     = 0x" TARGET_FMT_plx "\n" | 
|  | "qemu: cmdline_addr  = 0x" TARGET_FMT_plx "\n" | 
|  | "qemu: prot_addr     = 0x" TARGET_FMT_plx "\n", | 
|  | real_addr, | 
|  | cmdline_addr, | 
|  | prot_addr); | 
|  | #endif | 
|  |  | 
|  | /* highest address for loading the initrd */ | 
|  | if (protocol >= 0x203) | 
|  | initrd_max = ldl_p(header+0x22c); | 
|  | else | 
|  | initrd_max = 0x37ffffff; | 
|  |  | 
|  | if (initrd_max >= max_ram_size-ACPI_DATA_SIZE) | 
|  | initrd_max = max_ram_size-ACPI_DATA_SIZE-1; | 
|  |  | 
|  | fw_cfg_add_i32(fw_cfg, FW_CFG_CMDLINE_ADDR, cmdline_addr); | 
|  | fw_cfg_add_i32(fw_cfg, FW_CFG_CMDLINE_SIZE, strlen(kernel_cmdline)+1); | 
|  | fw_cfg_add_string(fw_cfg, FW_CFG_CMDLINE_DATA, kernel_cmdline); | 
|  |  | 
|  | if (protocol >= 0x202) { | 
|  | stl_p(header+0x228, cmdline_addr); | 
|  | } else { | 
|  | stw_p(header+0x20, 0xA33F); | 
|  | stw_p(header+0x22, cmdline_addr-real_addr); | 
|  | } | 
|  |  | 
|  | /* handle vga= parameter */ | 
|  | vmode = strstr(kernel_cmdline, "vga="); | 
|  | if (vmode) { | 
|  | unsigned int video_mode; | 
|  | /* skip "vga=" */ | 
|  | vmode += 4; | 
|  | if (!strncmp(vmode, "normal", 6)) { | 
|  | video_mode = 0xffff; | 
|  | } else if (!strncmp(vmode, "ext", 3)) { | 
|  | video_mode = 0xfffe; | 
|  | } else if (!strncmp(vmode, "ask", 3)) { | 
|  | video_mode = 0xfffd; | 
|  | } else { | 
|  | video_mode = strtol(vmode, NULL, 0); | 
|  | } | 
|  | stw_p(header+0x1fa, video_mode); | 
|  | } | 
|  |  | 
|  | /* loader type */ | 
|  | /* High nybble = B reserved for QEMU; low nybble is revision number. | 
|  | If this code is substantially changed, you may want to consider | 
|  | incrementing the revision. */ | 
|  | if (protocol >= 0x200) | 
|  | header[0x210] = 0xB0; | 
|  |  | 
|  | /* heap */ | 
|  | if (protocol >= 0x201) { | 
|  | header[0x211] |= 0x80;	/* CAN_USE_HEAP */ | 
|  | stw_p(header+0x224, cmdline_addr-real_addr-0x200); | 
|  | } | 
|  |  | 
|  | /* load initrd */ | 
|  | if (initrd_filename) { | 
|  | if (protocol < 0x200) { | 
|  | fprintf(stderr, "qemu: linux kernel too old to load a ram disk\n"); | 
|  | exit(1); | 
|  | } | 
|  |  | 
|  | initrd_size = get_image_size(initrd_filename); | 
|  | if (initrd_size < 0) { | 
|  | fprintf(stderr, "qemu: error reading initrd %s\n", | 
|  | initrd_filename); | 
|  | exit(1); | 
|  | } | 
|  |  | 
|  | initrd_addr = (initrd_max-initrd_size) & ~4095; | 
|  |  | 
|  | initrd_data = g_malloc(initrd_size); | 
|  | load_image(initrd_filename, initrd_data); | 
|  |  | 
|  | fw_cfg_add_i32(fw_cfg, FW_CFG_INITRD_ADDR, initrd_addr); | 
|  | fw_cfg_add_i32(fw_cfg, FW_CFG_INITRD_SIZE, initrd_size); | 
|  | fw_cfg_add_bytes(fw_cfg, FW_CFG_INITRD_DATA, initrd_data, initrd_size); | 
|  |  | 
|  | stl_p(header+0x218, initrd_addr); | 
|  | stl_p(header+0x21c, initrd_size); | 
|  | } | 
|  |  | 
|  | /* load kernel and setup */ | 
|  | setup_size = header[0x1f1]; | 
|  | if (setup_size == 0) | 
|  | setup_size = 4; | 
|  | setup_size = (setup_size+1)*512; | 
|  | kernel_size -= setup_size; | 
|  |  | 
|  | setup  = g_malloc(setup_size); | 
|  | kernel = g_malloc(kernel_size); | 
|  | fseek(f, 0, SEEK_SET); | 
|  | if (fread(setup, 1, setup_size, f) != setup_size) { | 
|  | fprintf(stderr, "fread() failed\n"); | 
|  | exit(1); | 
|  | } | 
|  | if (fread(kernel, 1, kernel_size, f) != kernel_size) { | 
|  | fprintf(stderr, "fread() failed\n"); | 
|  | exit(1); | 
|  | } | 
|  | fclose(f); | 
|  | memcpy(setup, header, MIN(sizeof(header), setup_size)); | 
|  |  | 
|  | fw_cfg_add_i32(fw_cfg, FW_CFG_KERNEL_ADDR, prot_addr); | 
|  | fw_cfg_add_i32(fw_cfg, FW_CFG_KERNEL_SIZE, kernel_size); | 
|  | fw_cfg_add_bytes(fw_cfg, FW_CFG_KERNEL_DATA, kernel, kernel_size); | 
|  |  | 
|  | fw_cfg_add_i32(fw_cfg, FW_CFG_SETUP_ADDR, real_addr); | 
|  | fw_cfg_add_i32(fw_cfg, FW_CFG_SETUP_SIZE, setup_size); | 
|  | fw_cfg_add_bytes(fw_cfg, FW_CFG_SETUP_DATA, setup, setup_size); | 
|  |  | 
|  | option_rom[nb_option_roms].name = "linuxboot.bin"; | 
|  | option_rom[nb_option_roms].bootindex = 0; | 
|  | nb_option_roms++; | 
|  | } | 
|  |  | 
|  | #define NE2000_NB_MAX 6 | 
|  |  | 
|  | static const int ne2000_io[NE2000_NB_MAX] = { 0x300, 0x320, 0x340, 0x360, | 
|  | 0x280, 0x380 }; | 
|  | static const int ne2000_irq[NE2000_NB_MAX] = { 9, 10, 11, 3, 4, 5 }; | 
|  |  | 
|  | static const int parallel_io[MAX_PARALLEL_PORTS] = { 0x378, 0x278, 0x3bc }; | 
|  | static const int parallel_irq[MAX_PARALLEL_PORTS] = { 7, 7, 7 }; | 
|  |  | 
|  | void pc_init_ne2k_isa(ISABus *bus, NICInfo *nd) | 
|  | { | 
|  | static int nb_ne2k = 0; | 
|  |  | 
|  | if (nb_ne2k == NE2000_NB_MAX) | 
|  | return; | 
|  | isa_ne2000_init(bus, ne2000_io[nb_ne2k], | 
|  | ne2000_irq[nb_ne2k], nd); | 
|  | nb_ne2k++; | 
|  | } | 
|  |  | 
|  | DeviceState *cpu_get_current_apic(void) | 
|  | { | 
|  | if (cpu_single_env) { | 
|  | return cpu_single_env->apic_state; | 
|  | } else { | 
|  | return NULL; | 
|  | } | 
|  | } | 
|  |  | 
|  | void pc_acpi_smi_interrupt(void *opaque, int irq, int level) | 
|  | { | 
|  | CPUX86State *s = opaque; | 
|  |  | 
|  | if (level) { | 
|  | cpu_interrupt(s, CPU_INTERRUPT_SMI); | 
|  | } | 
|  | } | 
|  |  | 
|  | void pc_cpus_init(const char *cpu_model) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | /* init CPUs */ | 
|  | if (cpu_model == NULL) { | 
|  | #ifdef TARGET_X86_64 | 
|  | cpu_model = "qemu64"; | 
|  | #else | 
|  | cpu_model = "qemu32"; | 
|  | #endif | 
|  | } | 
|  |  | 
|  | for (i = 0; i < smp_cpus; i++) { | 
|  | if (!cpu_x86_init(cpu_model)) { | 
|  | fprintf(stderr, "Unable to find x86 CPU definition\n"); | 
|  | exit(1); | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | void pc_acpi_init(const char *default_dsdt) | 
|  | { | 
|  | char *filename = NULL, *arg = NULL; | 
|  |  | 
|  | if (acpi_tables != NULL) { | 
|  | /* manually set via -acpitable, leave it alone */ | 
|  | return; | 
|  | } | 
|  |  | 
|  | filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, default_dsdt); | 
|  | if (filename == NULL) { | 
|  | fprintf(stderr, "WARNING: failed to find %s\n", default_dsdt); | 
|  | return; | 
|  | } | 
|  |  | 
|  | arg = g_strdup_printf("file=%s", filename); | 
|  | if (acpi_table_add(arg) != 0) { | 
|  | fprintf(stderr, "WARNING: failed to load %s\n", filename); | 
|  | } | 
|  | g_free(arg); | 
|  | g_free(filename); | 
|  | } | 
|  |  | 
|  | void *pc_memory_init(MemoryRegion *system_memory, | 
|  | const char *kernel_filename, | 
|  | const char *kernel_cmdline, | 
|  | const char *initrd_filename, | 
|  | ram_addr_t below_4g_mem_size, | 
|  | ram_addr_t above_4g_mem_size, | 
|  | MemoryRegion *rom_memory, | 
|  | MemoryRegion **ram_memory) | 
|  | { | 
|  | int linux_boot, i; | 
|  | MemoryRegion *ram, *option_rom_mr; | 
|  | MemoryRegion *ram_below_4g, *ram_above_4g; | 
|  | void *fw_cfg; | 
|  |  | 
|  | linux_boot = (kernel_filename != NULL); | 
|  |  | 
|  | /* Allocate RAM.  We allocate it as a single memory region and use | 
|  | * aliases to address portions of it, mostly for backwards compatibility | 
|  | * with older qemus that used qemu_ram_alloc(). | 
|  | */ | 
|  | ram = g_malloc(sizeof(*ram)); | 
|  | memory_region_init_ram(ram, "pc.ram", | 
|  | below_4g_mem_size + above_4g_mem_size); | 
|  | vmstate_register_ram_global(ram); | 
|  | *ram_memory = ram; | 
|  | ram_below_4g = g_malloc(sizeof(*ram_below_4g)); | 
|  | memory_region_init_alias(ram_below_4g, "ram-below-4g", ram, | 
|  | 0, below_4g_mem_size); | 
|  | memory_region_add_subregion(system_memory, 0, ram_below_4g); | 
|  | if (above_4g_mem_size > 0) { | 
|  | ram_above_4g = g_malloc(sizeof(*ram_above_4g)); | 
|  | memory_region_init_alias(ram_above_4g, "ram-above-4g", ram, | 
|  | below_4g_mem_size, above_4g_mem_size); | 
|  | memory_region_add_subregion(system_memory, 0x100000000ULL, | 
|  | ram_above_4g); | 
|  | } | 
|  |  | 
|  |  | 
|  | /* Initialize PC system firmware */ | 
|  | pc_system_firmware_init(rom_memory); | 
|  |  | 
|  | option_rom_mr = g_malloc(sizeof(*option_rom_mr)); | 
|  | memory_region_init_ram(option_rom_mr, "pc.rom", PC_ROM_SIZE); | 
|  | vmstate_register_ram_global(option_rom_mr); | 
|  | memory_region_add_subregion_overlap(rom_memory, | 
|  | PC_ROM_MIN_VGA, | 
|  | option_rom_mr, | 
|  | 1); | 
|  |  | 
|  | fw_cfg = bochs_bios_init(); | 
|  | rom_set_fw(fw_cfg); | 
|  |  | 
|  | if (linux_boot) { | 
|  | load_linux(fw_cfg, kernel_filename, initrd_filename, kernel_cmdline, below_4g_mem_size); | 
|  | } | 
|  |  | 
|  | for (i = 0; i < nb_option_roms; i++) { | 
|  | rom_add_option(option_rom[i].name, option_rom[i].bootindex); | 
|  | } | 
|  | return fw_cfg; | 
|  | } | 
|  |  | 
|  | qemu_irq *pc_allocate_cpu_irq(void) | 
|  | { | 
|  | return qemu_allocate_irqs(pic_irq_request, NULL, 1); | 
|  | } | 
|  |  | 
|  | DeviceState *pc_vga_init(ISABus *isa_bus, PCIBus *pci_bus) | 
|  | { | 
|  | DeviceState *dev = NULL; | 
|  |  | 
|  | if (pci_bus) { | 
|  | PCIDevice *pcidev = pci_vga_init(pci_bus); | 
|  | dev = pcidev ? &pcidev->qdev : NULL; | 
|  | } else if (isa_bus) { | 
|  | ISADevice *isadev = isa_vga_init(isa_bus); | 
|  | dev = isadev ? &isadev->qdev : NULL; | 
|  | } | 
|  | return dev; | 
|  | } | 
|  |  | 
|  | static void cpu_request_exit(void *opaque, int irq, int level) | 
|  | { | 
|  | CPUX86State *env = cpu_single_env; | 
|  |  | 
|  | if (env && level) { | 
|  | cpu_exit(env); | 
|  | } | 
|  | } | 
|  |  | 
|  | static const MemoryRegionOps ioport80_io_ops = { | 
|  | .write = ioport80_write, | 
|  | .read = ioport80_read, | 
|  | .endianness = DEVICE_NATIVE_ENDIAN, | 
|  | .impl = { | 
|  | .min_access_size = 1, | 
|  | .max_access_size = 1, | 
|  | }, | 
|  | }; | 
|  |  | 
|  | static const MemoryRegionOps ioportF0_io_ops = { | 
|  | .write = ioportF0_write, | 
|  | .read = ioportF0_read, | 
|  | .endianness = DEVICE_NATIVE_ENDIAN, | 
|  | .impl = { | 
|  | .min_access_size = 1, | 
|  | .max_access_size = 1, | 
|  | }, | 
|  | }; | 
|  |  | 
|  | void pc_basic_device_init(ISABus *isa_bus, qemu_irq *gsi, | 
|  | ISADevice **rtc_state, | 
|  | ISADevice **floppy, | 
|  | bool no_vmport) | 
|  | { | 
|  | int i; | 
|  | DriveInfo *fd[MAX_FD]; | 
|  | DeviceState *hpet = NULL; | 
|  | int pit_isa_irq = 0; | 
|  | qemu_irq pit_alt_irq = NULL; | 
|  | qemu_irq rtc_irq = NULL; | 
|  | qemu_irq *a20_line; | 
|  | ISADevice *i8042, *port92, *vmmouse, *pit = NULL; | 
|  | qemu_irq *cpu_exit_irq; | 
|  | MemoryRegion *ioport80_io = g_new(MemoryRegion, 1); | 
|  | MemoryRegion *ioportF0_io = g_new(MemoryRegion, 1); | 
|  |  | 
|  | memory_region_init_io(ioport80_io, &ioport80_io_ops, NULL, "ioport80", 1); | 
|  | memory_region_add_subregion(isa_bus->address_space_io, 0x80, ioport80_io); | 
|  |  | 
|  | memory_region_init_io(ioportF0_io, &ioportF0_io_ops, NULL, "ioportF0", 1); | 
|  | memory_region_add_subregion(isa_bus->address_space_io, 0xf0, ioportF0_io); | 
|  |  | 
|  | /* | 
|  | * Check if an HPET shall be created. | 
|  | * | 
|  | * Without KVM_CAP_PIT_STATE2, we cannot switch off the in-kernel PIT | 
|  | * when the HPET wants to take over. Thus we have to disable the latter. | 
|  | */ | 
|  | if (!no_hpet && (!kvm_irqchip_in_kernel() || kvm_has_pit_state2())) { | 
|  | hpet = sysbus_try_create_simple("hpet", HPET_BASE, NULL); | 
|  |  | 
|  | if (hpet) { | 
|  | for (i = 0; i < GSI_NUM_PINS; i++) { | 
|  | sysbus_connect_irq(SYS_BUS_DEVICE(hpet), i, gsi[i]); | 
|  | } | 
|  | pit_isa_irq = -1; | 
|  | pit_alt_irq = qdev_get_gpio_in(hpet, HPET_LEGACY_PIT_INT); | 
|  | rtc_irq = qdev_get_gpio_in(hpet, HPET_LEGACY_RTC_INT); | 
|  | } | 
|  | } | 
|  | *rtc_state = rtc_init(isa_bus, 2000, rtc_irq); | 
|  |  | 
|  | qemu_register_boot_set(pc_boot_set, *rtc_state); | 
|  |  | 
|  | if (!xen_enabled()) { | 
|  | if (kvm_irqchip_in_kernel()) { | 
|  | pit = kvm_pit_init(isa_bus, 0x40); | 
|  | } else { | 
|  | pit = pit_init(isa_bus, 0x40, pit_isa_irq, pit_alt_irq); | 
|  | } | 
|  | if (hpet) { | 
|  | /* connect PIT to output control line of the HPET */ | 
|  | qdev_connect_gpio_out(hpet, 0, qdev_get_gpio_in(&pit->qdev, 0)); | 
|  | } | 
|  | pcspk_init(isa_bus, pit); | 
|  | } | 
|  |  | 
|  | for(i = 0; i < MAX_SERIAL_PORTS; i++) { | 
|  | if (serial_hds[i]) { | 
|  | serial_isa_init(isa_bus, i, serial_hds[i]); | 
|  | } | 
|  | } | 
|  |  | 
|  | for(i = 0; i < MAX_PARALLEL_PORTS; i++) { | 
|  | if (parallel_hds[i]) { | 
|  | parallel_init(isa_bus, i, parallel_hds[i]); | 
|  | } | 
|  | } | 
|  |  | 
|  | a20_line = qemu_allocate_irqs(handle_a20_line_change, | 
|  | x86_env_get_cpu(first_cpu), 2); | 
|  | i8042 = isa_create_simple(isa_bus, "i8042"); | 
|  | i8042_setup_a20_line(i8042, &a20_line[0]); | 
|  | if (!no_vmport) { | 
|  | vmport_init(isa_bus); | 
|  | vmmouse = isa_try_create(isa_bus, "vmmouse"); | 
|  | } else { | 
|  | vmmouse = NULL; | 
|  | } | 
|  | if (vmmouse) { | 
|  | qdev_prop_set_ptr(&vmmouse->qdev, "ps2_mouse", i8042); | 
|  | qdev_init_nofail(&vmmouse->qdev); | 
|  | } | 
|  | port92 = isa_create_simple(isa_bus, "port92"); | 
|  | port92_init(port92, &a20_line[1]); | 
|  |  | 
|  | cpu_exit_irq = qemu_allocate_irqs(cpu_request_exit, NULL, 1); | 
|  | DMA_init(0, cpu_exit_irq); | 
|  |  | 
|  | for(i = 0; i < MAX_FD; i++) { | 
|  | fd[i] = drive_get(IF_FLOPPY, 0, i); | 
|  | } | 
|  | *floppy = fdctrl_init_isa(isa_bus, fd); | 
|  | } | 
|  |  | 
|  | void pc_nic_init(ISABus *isa_bus, PCIBus *pci_bus) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | for (i = 0; i < nb_nics; i++) { | 
|  | NICInfo *nd = &nd_table[i]; | 
|  |  | 
|  | if (!pci_bus || (nd->model && strcmp(nd->model, "ne2k_isa") == 0)) { | 
|  | pc_init_ne2k_isa(isa_bus, nd); | 
|  | } else { | 
|  | pci_nic_init_nofail(nd, "e1000", NULL); | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | void pc_pci_device_init(PCIBus *pci_bus) | 
|  | { | 
|  | int max_bus; | 
|  | int bus; | 
|  |  | 
|  | max_bus = drive_get_max_bus(IF_SCSI); | 
|  | for (bus = 0; bus <= max_bus; bus++) { | 
|  | pci_create_simple(pci_bus, -1, "lsi53c895a"); | 
|  | } | 
|  | } | 
|  |  | 
|  | void ioapic_init_gsi(GSIState *gsi_state, const char *parent_name) | 
|  | { | 
|  | DeviceState *dev; | 
|  | SysBusDevice *d; | 
|  | unsigned int i; | 
|  |  | 
|  | if (kvm_irqchip_in_kernel()) { | 
|  | dev = qdev_create(NULL, "kvm-ioapic"); | 
|  | } else { | 
|  | dev = qdev_create(NULL, "ioapic"); | 
|  | } | 
|  | if (parent_name) { | 
|  | object_property_add_child(object_resolve_path(parent_name, NULL), | 
|  | "ioapic", OBJECT(dev), NULL); | 
|  | } | 
|  | qdev_init_nofail(dev); | 
|  | d = SYS_BUS_DEVICE(dev); | 
|  | sysbus_mmio_map(d, 0, 0xfec00000); | 
|  |  | 
|  | for (i = 0; i < IOAPIC_NUM_PINS; i++) { | 
|  | gsi_state->ioapic_irq[i] = qdev_get_gpio_in(dev, i); | 
|  | } | 
|  | } |