|  | /* | 
|  | * Hard disk geometry test cases. | 
|  | * | 
|  | * Copyright (c) 2012 Red Hat Inc. | 
|  | * | 
|  | * Authors: | 
|  | *  Markus Armbruster <armbru@redhat.com>, | 
|  | * | 
|  | * This work is licensed under the terms of the GNU GPL, version 2 or later. | 
|  | * See the COPYING file in the top-level directory. | 
|  | */ | 
|  |  | 
|  | /* | 
|  | * Covers only IDE and tests only CMOS contents.  Better than nothing. | 
|  | * Improvements welcome. | 
|  | */ | 
|  |  | 
|  | #include <glib.h> | 
|  | #include <stdlib.h> | 
|  | #include <string.h> | 
|  | #include <unistd.h> | 
|  | #include "qemu-common.h" | 
|  | #include "libqtest.h" | 
|  |  | 
|  | static char *create_test_img(int secs) | 
|  | { | 
|  | char *template = strdup("/tmp/qtest.XXXXXX"); | 
|  | int fd, ret; | 
|  |  | 
|  | fd = mkstemp(template); | 
|  | g_assert(fd >= 0); | 
|  | ret = ftruncate(fd, (off_t)secs * 512); | 
|  | g_assert(ret == 0); | 
|  | close(fd); | 
|  | return template; | 
|  | } | 
|  |  | 
|  | typedef struct { | 
|  | int cyls, heads, secs, trans; | 
|  | } CHST; | 
|  |  | 
|  | typedef enum { | 
|  | mbr_blank, mbr_lba, mbr_chs, | 
|  | mbr_last | 
|  | } MBRcontents; | 
|  |  | 
|  | typedef enum { | 
|  | /* order is relevant */ | 
|  | backend_small, backend_large, backend_empty, | 
|  | backend_last | 
|  | } Backend; | 
|  |  | 
|  | static const int img_secs[backend_last] = { | 
|  | [backend_small] = 61440, | 
|  | [backend_large] = 8388608, | 
|  | [backend_empty] = -1, | 
|  | }; | 
|  |  | 
|  | static const CHST hd_chst[backend_last][mbr_last] = { | 
|  | [backend_small] = { | 
|  | [mbr_blank] = { 60, 16, 63, 0 }, | 
|  | [mbr_lba]   = { 60, 16, 63, 2 }, | 
|  | [mbr_chs]   = { 60, 16, 63, 0 } | 
|  | }, | 
|  | [backend_large] = { | 
|  | [mbr_blank] = { 8322, 16, 63, 1 }, | 
|  | [mbr_lba]   = { 8322, 16, 63, 1 }, | 
|  | [mbr_chs]   = { 8322, 16, 63, 0 } | 
|  | }, | 
|  | }; | 
|  |  | 
|  | static const char *img_file_name[backend_last]; | 
|  |  | 
|  | static const CHST *cur_ide[4]; | 
|  |  | 
|  | static bool is_hd(const CHST *expected_chst) | 
|  | { | 
|  | return expected_chst && expected_chst->cyls; | 
|  | } | 
|  |  | 
|  | static void test_cmos_byte(int reg, int expected) | 
|  | { | 
|  | enum { cmos_base = 0x70 }; | 
|  | int actual; | 
|  |  | 
|  | outb(cmos_base + 0, reg); | 
|  | actual = inb(cmos_base + 1); | 
|  | g_assert(actual == expected); | 
|  | } | 
|  |  | 
|  | static void test_cmos_bytes(int reg0, int n, uint8_t expected[]) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | for (i = 0; i < 9; i++) { | 
|  | test_cmos_byte(reg0 + i, expected[i]); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void test_cmos_disk_data(void) | 
|  | { | 
|  | test_cmos_byte(0x12, | 
|  | (is_hd(cur_ide[0]) ? 0xf0 : 0) | | 
|  | (is_hd(cur_ide[1]) ? 0x0f : 0)); | 
|  | } | 
|  |  | 
|  | static void test_cmos_drive_cyl(int reg0, const CHST *expected_chst) | 
|  | { | 
|  | if (is_hd(expected_chst)) { | 
|  | int c = expected_chst->cyls; | 
|  | int h = expected_chst->heads; | 
|  | int s = expected_chst->secs; | 
|  | uint8_t expected_bytes[9] = { | 
|  | c & 0xff, c >> 8, h, 0xff, 0xff, 0xc0 | ((h > 8) << 3), | 
|  | c & 0xff, c >> 8, s | 
|  | }; | 
|  | test_cmos_bytes(reg0, 9, expected_bytes); | 
|  | } else { | 
|  | int i; | 
|  |  | 
|  | for (i = 0; i < 9; i++) { | 
|  | test_cmos_byte(reg0 + i, 0); | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | static void test_cmos_drive1(void) | 
|  | { | 
|  | test_cmos_byte(0x19, is_hd(cur_ide[0]) ? 47 : 0); | 
|  | test_cmos_drive_cyl(0x1b, cur_ide[0]); | 
|  | } | 
|  |  | 
|  | static void test_cmos_drive2(void) | 
|  | { | 
|  | test_cmos_byte(0x1a, is_hd(cur_ide[1]) ? 47 : 0); | 
|  | test_cmos_drive_cyl(0x24, cur_ide[1]); | 
|  | } | 
|  |  | 
|  | static void test_cmos_disktransflag(void) | 
|  | { | 
|  | int val, i; | 
|  |  | 
|  | val = 0; | 
|  | for (i = 0; i < ARRAY_SIZE(cur_ide); i++) { | 
|  | if (is_hd(cur_ide[i])) { | 
|  | val |= cur_ide[i]->trans << (2 * i); | 
|  | } | 
|  | } | 
|  | test_cmos_byte(0x39, val); | 
|  | } | 
|  |  | 
|  | static void test_cmos(void) | 
|  | { | 
|  | test_cmos_disk_data(); | 
|  | test_cmos_drive1(); | 
|  | test_cmos_drive2(); | 
|  | test_cmos_disktransflag(); | 
|  | } | 
|  |  | 
|  | static int append_arg(int argc, char *argv[], int argv_sz, char *arg) | 
|  | { | 
|  | g_assert(argc + 1 < argv_sz); | 
|  | argv[argc++] = arg; | 
|  | argv[argc] = NULL; | 
|  | return argc; | 
|  | } | 
|  |  | 
|  | static int setup_common(char *argv[], int argv_sz) | 
|  | { | 
|  | memset(cur_ide, 0, sizeof(cur_ide)); | 
|  | return append_arg(0, argv, argv_sz, | 
|  | g_strdup("-nodefaults")); | 
|  | } | 
|  |  | 
|  | static void setup_mbr(int img_idx, MBRcontents mbr) | 
|  | { | 
|  | static const uint8_t part_lba[16] = { | 
|  | /* chs 0,1,1 (lba 63) to chs 0,127,63 (8001 sectors) */ | 
|  | 0x80, 1, 1, 0, 6, 127, 63, 0, 63, 0, 0, 0, 0x41, 0x1F, 0, 0, | 
|  | }; | 
|  | static const uint8_t part_chs[16] = { | 
|  | /* chs 0,1,1 (lba 63) to chs 7,15,63 (8001 sectors) */ | 
|  | 0x80, 1, 1, 0, 6,  15, 63, 7, 63, 0, 0, 0, 0x41, 0x1F, 0, 0, | 
|  | }; | 
|  | uint8_t buf[512]; | 
|  | int fd, ret; | 
|  |  | 
|  | memset(buf, 0, sizeof(buf)); | 
|  |  | 
|  | if (mbr != mbr_blank) { | 
|  | buf[0x1fe] = 0x55; | 
|  | buf[0x1ff] = 0xAA; | 
|  | memcpy(buf + 0x1BE, mbr == mbr_lba ? part_lba : part_chs, 16); | 
|  | } | 
|  |  | 
|  | fd = open(img_file_name[img_idx], O_WRONLY); | 
|  | g_assert(fd >= 0); | 
|  | ret = write(fd, buf, sizeof(buf)); | 
|  | g_assert(ret == sizeof(buf)); | 
|  | close(fd); | 
|  | } | 
|  |  | 
|  | static int setup_ide(int argc, char *argv[], int argv_sz, | 
|  | int ide_idx, const char *dev, int img_idx, | 
|  | MBRcontents mbr, const char *opts) | 
|  | { | 
|  | char *s1, *s2, *s3; | 
|  |  | 
|  | s1 = g_strdup_printf("-drive id=drive%d,if=%s,format=raw", | 
|  | ide_idx, dev ? "none" : "ide"); | 
|  | s2 = dev ? g_strdup("") : g_strdup_printf(",index=%d", ide_idx); | 
|  |  | 
|  | if (img_secs[img_idx] >= 0) { | 
|  | setup_mbr(img_idx, mbr); | 
|  | s3 = g_strdup_printf(",file=%s", img_file_name[img_idx]); | 
|  | } else { | 
|  | s3 = g_strdup(",media=cdrom"); | 
|  | } | 
|  | argc = append_arg(argc, argv, argv_sz, | 
|  | g_strdup_printf("%s%s%s%s", s1, s2, s3, opts)); | 
|  | g_free(s1); | 
|  | g_free(s2); | 
|  | g_free(s3); | 
|  |  | 
|  | if (dev) { | 
|  | argc = append_arg(argc, argv, argv_sz, | 
|  | g_strdup_printf("-device %s,drive=drive%d," | 
|  | "bus=ide.%d,unit=%d", | 
|  | dev, ide_idx, | 
|  | ide_idx / 2, ide_idx % 2)); | 
|  | } | 
|  | return argc; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Test case: no IDE devices | 
|  | */ | 
|  | static void test_ide_none(void) | 
|  | { | 
|  | char *argv[256]; | 
|  |  | 
|  | setup_common(argv, ARRAY_SIZE(argv)); | 
|  | qtest_start(g_strjoinv(" ", argv)); | 
|  | test_cmos(); | 
|  | qtest_end(); | 
|  | } | 
|  |  | 
|  | static void test_ide_mbr(bool use_device, MBRcontents mbr) | 
|  | { | 
|  | char *argv[256]; | 
|  | int argc; | 
|  | Backend i; | 
|  | const char *dev; | 
|  |  | 
|  | argc = setup_common(argv, ARRAY_SIZE(argv)); | 
|  | for (i = 0; i < backend_last; i++) { | 
|  | cur_ide[i] = &hd_chst[i][mbr]; | 
|  | dev = use_device ? (is_hd(cur_ide[i]) ? "ide-hd" : "ide-cd") : NULL; | 
|  | argc = setup_ide(argc, argv, ARRAY_SIZE(argv), i, dev, i, mbr, ""); | 
|  | } | 
|  | qtest_start(g_strjoinv(" ", argv)); | 
|  | test_cmos(); | 
|  | qtest_end(); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Test case: IDE devices (if=ide) with blank MBRs | 
|  | */ | 
|  | static void test_ide_drive_mbr_blank(void) | 
|  | { | 
|  | test_ide_mbr(false, mbr_blank); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Test case: IDE devices (if=ide) with MBRs indicating LBA is in use | 
|  | */ | 
|  | static void test_ide_drive_mbr_lba(void) | 
|  | { | 
|  | test_ide_mbr(false, mbr_lba); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Test case: IDE devices (if=ide) with MBRs indicating CHS is in use | 
|  | */ | 
|  | static void test_ide_drive_mbr_chs(void) | 
|  | { | 
|  | test_ide_mbr(false, mbr_chs); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Test case: IDE devices (if=none) with blank MBRs | 
|  | */ | 
|  | static void test_ide_device_mbr_blank(void) | 
|  | { | 
|  | test_ide_mbr(true, mbr_blank); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Test case: IDE devices (if=none) with MBRs indicating LBA is in use | 
|  | */ | 
|  | static void test_ide_device_mbr_lba(void) | 
|  | { | 
|  | test_ide_mbr(true, mbr_lba); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Test case: IDE devices (if=none) with MBRs indicating CHS is in use | 
|  | */ | 
|  | static void test_ide_device_mbr_chs(void) | 
|  | { | 
|  | test_ide_mbr(true, mbr_chs); | 
|  | } | 
|  |  | 
|  | static void test_ide_drive_user(const char *dev, bool trans) | 
|  | { | 
|  | char *argv[256], *opts; | 
|  | int argc; | 
|  | int secs = img_secs[backend_small]; | 
|  | const CHST expected_chst = { secs / (4 * 32) , 4, 32, trans }; | 
|  |  | 
|  | argc = setup_common(argv, ARRAY_SIZE(argv)); | 
|  | opts = g_strdup_printf("%s,%s%scyls=%d,heads=%d,secs=%d", | 
|  | dev ?: "", | 
|  | trans && dev ? "bios-chs-" : "", | 
|  | trans ? "trans=lba," : "", | 
|  | expected_chst.cyls, expected_chst.heads, | 
|  | expected_chst.secs); | 
|  | cur_ide[0] = &expected_chst; | 
|  | argc = setup_ide(argc, argv, ARRAY_SIZE(argv), | 
|  | 0, dev ? opts : NULL, backend_small, mbr_chs, | 
|  | dev ? "" : opts); | 
|  | g_free(opts); | 
|  | qtest_start(g_strjoinv(" ", argv)); | 
|  | test_cmos(); | 
|  | qtest_end(); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Test case: IDE device (if=ide) with explicit CHS | 
|  | */ | 
|  | static void test_ide_drive_user_chs(void) | 
|  | { | 
|  | test_ide_drive_user(NULL, false); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Test case: IDE device (if=ide) with explicit CHS and translation | 
|  | */ | 
|  | static void test_ide_drive_user_chst(void) | 
|  | { | 
|  | test_ide_drive_user(NULL, true); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Test case: IDE device (if=none) with explicit CHS | 
|  | */ | 
|  | static void test_ide_device_user_chs(void) | 
|  | { | 
|  | test_ide_drive_user("ide-hd", false); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Test case: IDE device (if=none) with explicit CHS and translation | 
|  | */ | 
|  | static void test_ide_device_user_chst(void) | 
|  | { | 
|  | test_ide_drive_user("ide-hd", true); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Test case: IDE devices (if=ide), but use index=0 for CD-ROM | 
|  | */ | 
|  | static void test_ide_drive_cd_0(void) | 
|  | { | 
|  | char *argv[256]; | 
|  | int argc, ide_idx; | 
|  | Backend i; | 
|  |  | 
|  | argc = setup_common(argv, ARRAY_SIZE(argv)); | 
|  | for (i = 0; i <= backend_empty; i++) { | 
|  | ide_idx = backend_empty - i; | 
|  | cur_ide[ide_idx] = &hd_chst[i][mbr_blank]; | 
|  | argc = setup_ide(argc, argv, ARRAY_SIZE(argv), | 
|  | ide_idx, NULL, i, mbr_blank, ""); | 
|  | } | 
|  | qtest_start(g_strjoinv(" ", argv)); | 
|  | test_cmos(); | 
|  | qtest_end(); | 
|  | } | 
|  |  | 
|  | int main(int argc, char **argv) | 
|  | { | 
|  | Backend i; | 
|  | int ret; | 
|  |  | 
|  | g_test_init(&argc, &argv, NULL); | 
|  |  | 
|  | for (i = 0; i < backend_last; i++) { | 
|  | if (img_secs[i] >= 0) { | 
|  | img_file_name[i] = create_test_img(img_secs[i]); | 
|  | } else { | 
|  | img_file_name[i] = NULL; | 
|  | } | 
|  | } | 
|  |  | 
|  | qtest_add_func("hd-geo/ide/none", test_ide_none); | 
|  | qtest_add_func("hd-geo/ide/drive/mbr/blank", test_ide_drive_mbr_blank); | 
|  | qtest_add_func("hd-geo/ide/drive/mbr/lba", test_ide_drive_mbr_lba); | 
|  | qtest_add_func("hd-geo/ide/drive/mbr/chs", test_ide_drive_mbr_chs); | 
|  | qtest_add_func("hd-geo/ide/drive/user/chs", test_ide_drive_user_chs); | 
|  | qtest_add_func("hd-geo/ide/drive/user/chst", test_ide_drive_user_chst); | 
|  | qtest_add_func("hd-geo/ide/drive/cd_0", test_ide_drive_cd_0); | 
|  | qtest_add_func("hd-geo/ide/device/mbr/blank", test_ide_device_mbr_blank); | 
|  | qtest_add_func("hd-geo/ide/device/mbr/lba", test_ide_device_mbr_lba); | 
|  | qtest_add_func("hd-geo/ide/device/mbr/chs", test_ide_device_mbr_chs); | 
|  | qtest_add_func("hd-geo/ide/device/user/chs", test_ide_device_user_chs); | 
|  | qtest_add_func("hd-geo/ide/device/user/chst", test_ide_device_user_chst); | 
|  |  | 
|  | ret = g_test_run(); | 
|  |  | 
|  | for (i = 0; i < backend_last; i++) { | 
|  | unlink(img_file_name[i]); | 
|  | } | 
|  |  | 
|  | return ret; | 
|  | } |