|  | /* | 
|  | * QEMU Guest Agent | 
|  | * | 
|  | * Copyright IBM Corp. 2011 | 
|  | * | 
|  | * Authors: | 
|  | *  Adam Litke        <aglitke@linux.vnet.ibm.com> | 
|  | *  Michael Roth      <mdroth@linux.vnet.ibm.com> | 
|  | * | 
|  | * This work is licensed under the terms of the GNU GPL, version 2 or later. | 
|  | * See the COPYING file in the top-level directory. | 
|  | */ | 
|  | #include <stdlib.h> | 
|  | #include <stdio.h> | 
|  | #include <stdbool.h> | 
|  | #include <glib.h> | 
|  | #include <getopt.h> | 
|  | #include <glib/gstdio.h> | 
|  | #ifndef _WIN32 | 
|  | #include <syslog.h> | 
|  | #include <sys/wait.h> | 
|  | #include <sys/stat.h> | 
|  | #endif | 
|  | #include "qapi/qmp/json-streamer.h" | 
|  | #include "qapi/qmp/json-parser.h" | 
|  | #include "qapi/qmp/qint.h" | 
|  | #include "qapi/qmp/qjson.h" | 
|  | #include "qga/guest-agent-core.h" | 
|  | #include "qemu/module.h" | 
|  | #include "signal.h" | 
|  | #include "qapi/qmp/qerror.h" | 
|  | #include "qapi/qmp/dispatch.h" | 
|  | #include "qga/channel.h" | 
|  | #include "qemu/bswap.h" | 
|  | #ifdef _WIN32 | 
|  | #include "qga/service-win32.h" | 
|  | #include "qga/vss-win32.h" | 
|  | #endif | 
|  | #ifdef __linux__ | 
|  | #include <linux/fs.h> | 
|  | #ifdef FIFREEZE | 
|  | #define CONFIG_FSFREEZE | 
|  | #endif | 
|  | #endif | 
|  |  | 
|  | #ifndef _WIN32 | 
|  | #define QGA_VIRTIO_PATH_DEFAULT "/dev/virtio-ports/org.qemu.guest_agent.0" | 
|  | #define QGA_STATE_RELATIVE_DIR  "run" | 
|  | #define QGA_SERIAL_PATH_DEFAULT "/dev/ttyS0" | 
|  | #else | 
|  | #define QGA_VIRTIO_PATH_DEFAULT "\\\\.\\Global\\org.qemu.guest_agent.0" | 
|  | #define QGA_STATE_RELATIVE_DIR  "qemu-ga" | 
|  | #define QGA_SERIAL_PATH_DEFAULT "COM1" | 
|  | #endif | 
|  | #ifdef CONFIG_FSFREEZE | 
|  | #define QGA_FSFREEZE_HOOK_DEFAULT CONFIG_QEMU_CONFDIR "/fsfreeze-hook" | 
|  | #endif | 
|  | #define QGA_SENTINEL_BYTE 0xFF | 
|  | #define QGA_CONF_DEFAULT CONFIG_QEMU_CONFDIR G_DIR_SEPARATOR_S "qemu-ga.conf" | 
|  |  | 
|  | static struct { | 
|  | const char *state_dir; | 
|  | const char *pidfile; | 
|  | } dfl_pathnames; | 
|  |  | 
|  | typedef struct GAPersistentState { | 
|  | #define QGA_PSTATE_DEFAULT_FD_COUNTER 1000 | 
|  | int64_t fd_counter; | 
|  | } GAPersistentState; | 
|  |  | 
|  | struct GAState { | 
|  | JSONMessageParser parser; | 
|  | GMainLoop *main_loop; | 
|  | GAChannel *channel; | 
|  | bool virtio; /* fastpath to check for virtio to deal with poll() quirks */ | 
|  | GACommandState *command_state; | 
|  | GLogLevelFlags log_level; | 
|  | FILE *log_file; | 
|  | bool logging_enabled; | 
|  | #ifdef _WIN32 | 
|  | GAService service; | 
|  | #endif | 
|  | bool delimit_response; | 
|  | bool frozen; | 
|  | GList *blacklist; | 
|  | char *state_filepath_isfrozen; | 
|  | struct { | 
|  | const char *log_filepath; | 
|  | const char *pid_filepath; | 
|  | } deferred_options; | 
|  | #ifdef CONFIG_FSFREEZE | 
|  | const char *fsfreeze_hook; | 
|  | #endif | 
|  | gchar *pstate_filepath; | 
|  | GAPersistentState pstate; | 
|  | }; | 
|  |  | 
|  | struct GAState *ga_state; | 
|  |  | 
|  | /* commands that are safe to issue while filesystems are frozen */ | 
|  | static const char *ga_freeze_whitelist[] = { | 
|  | "guest-ping", | 
|  | "guest-info", | 
|  | "guest-sync", | 
|  | "guest-sync-delimited", | 
|  | "guest-fsfreeze-status", | 
|  | "guest-fsfreeze-thaw", | 
|  | NULL | 
|  | }; | 
|  |  | 
|  | #ifdef _WIN32 | 
|  | DWORD WINAPI service_ctrl_handler(DWORD ctrl, DWORD type, LPVOID data, | 
|  | LPVOID ctx); | 
|  | VOID WINAPI service_main(DWORD argc, TCHAR *argv[]); | 
|  | #endif | 
|  |  | 
|  | static void | 
|  | init_dfl_pathnames(void) | 
|  | { | 
|  | g_assert(dfl_pathnames.state_dir == NULL); | 
|  | g_assert(dfl_pathnames.pidfile == NULL); | 
|  | dfl_pathnames.state_dir = qemu_get_local_state_pathname( | 
|  | QGA_STATE_RELATIVE_DIR); | 
|  | dfl_pathnames.pidfile   = qemu_get_local_state_pathname( | 
|  | QGA_STATE_RELATIVE_DIR G_DIR_SEPARATOR_S "qemu-ga.pid"); | 
|  | } | 
|  |  | 
|  | static void quit_handler(int sig) | 
|  | { | 
|  | /* if we're frozen, don't exit unless we're absolutely forced to, | 
|  | * because it's basically impossible for graceful exit to complete | 
|  | * unless all log/pid files are on unfreezable filesystems. there's | 
|  | * also a very likely chance killing the agent before unfreezing | 
|  | * the filesystems is a mistake (or will be viewed as one later). | 
|  | */ | 
|  | if (ga_is_frozen(ga_state)) { | 
|  | return; | 
|  | } | 
|  | g_debug("received signal num %d, quitting", sig); | 
|  |  | 
|  | if (g_main_loop_is_running(ga_state->main_loop)) { | 
|  | g_main_loop_quit(ga_state->main_loop); | 
|  | } | 
|  | } | 
|  |  | 
|  | #ifndef _WIN32 | 
|  | static gboolean register_signal_handlers(void) | 
|  | { | 
|  | struct sigaction sigact; | 
|  | int ret; | 
|  |  | 
|  | memset(&sigact, 0, sizeof(struct sigaction)); | 
|  | sigact.sa_handler = quit_handler; | 
|  |  | 
|  | ret = sigaction(SIGINT, &sigact, NULL); | 
|  | if (ret == -1) { | 
|  | g_error("error configuring signal handler: %s", strerror(errno)); | 
|  | } | 
|  | ret = sigaction(SIGTERM, &sigact, NULL); | 
|  | if (ret == -1) { | 
|  | g_error("error configuring signal handler: %s", strerror(errno)); | 
|  | } | 
|  |  | 
|  | sigact.sa_handler = SIG_IGN; | 
|  | if (sigaction(SIGPIPE, &sigact, NULL) != 0) { | 
|  | g_error("error configuring SIGPIPE signal handler: %s", | 
|  | strerror(errno)); | 
|  | } | 
|  |  | 
|  | return true; | 
|  | } | 
|  |  | 
|  | /* TODO: use this in place of all post-fork() fclose(std*) callers */ | 
|  | void reopen_fd_to_null(int fd) | 
|  | { | 
|  | int nullfd; | 
|  |  | 
|  | nullfd = open("/dev/null", O_RDWR); | 
|  | if (nullfd < 0) { | 
|  | return; | 
|  | } | 
|  |  | 
|  | dup2(nullfd, fd); | 
|  |  | 
|  | if (nullfd != fd) { | 
|  | close(nullfd); | 
|  | } | 
|  | } | 
|  | #endif | 
|  |  | 
|  | static void usage(const char *cmd) | 
|  | { | 
|  | printf( | 
|  | "Usage: %s [-m <method> -p <path>] [<options>]\n" | 
|  | "QEMU Guest Agent %s\n" | 
|  | "\n" | 
|  | "  -m, --method      transport method: one of unix-listen, virtio-serial, or\n" | 
|  | "                    isa-serial (virtio-serial is the default)\n" | 
|  | "  -p, --path        device/socket path (the default for virtio-serial is:\n" | 
|  | "                    %s,\n" | 
|  | "                    the default for isa-serial is:\n" | 
|  | "                    %s)\n" | 
|  | "  -l, --logfile     set logfile path, logs to stderr by default\n" | 
|  | "  -f, --pidfile     specify pidfile (default is %s)\n" | 
|  | #ifdef CONFIG_FSFREEZE | 
|  | "  -F, --fsfreeze-hook\n" | 
|  | "                    enable fsfreeze hook. Accepts an optional argument that\n" | 
|  | "                    specifies script to run on freeze/thaw. Script will be\n" | 
|  | "                    called with 'freeze'/'thaw' arguments accordingly.\n" | 
|  | "                    (default is %s)\n" | 
|  | "                    If using -F with an argument, do not follow -F with a\n" | 
|  | "                    space.\n" | 
|  | "                    (for example: -F/var/run/fsfreezehook.sh)\n" | 
|  | #endif | 
|  | "  -t, --statedir    specify dir to store state information (absolute paths\n" | 
|  | "                    only, default is %s)\n" | 
|  | "  -v, --verbose     log extra debugging information\n" | 
|  | "  -V, --version     print version information and exit\n" | 
|  | "  -d, --daemonize   become a daemon\n" | 
|  | #ifdef _WIN32 | 
|  | "  -s, --service     service commands: install, uninstall, vss-install, vss-uninstall\n" | 
|  | #endif | 
|  | "  -b, --blacklist   comma-separated list of RPCs to disable (no spaces, \"?\"\n" | 
|  | "                    to list available RPCs)\n" | 
|  | "  -D, --dump-conf   dump a qemu-ga config file based on current config\n" | 
|  | "                    options / command-line parameters to stdout\n" | 
|  | "  -h, --help        display this help and exit\n" | 
|  | "\n" | 
|  | "Report bugs to <mdroth@linux.vnet.ibm.com>\n" | 
|  | , cmd, QEMU_VERSION, QGA_VIRTIO_PATH_DEFAULT, QGA_SERIAL_PATH_DEFAULT, | 
|  | dfl_pathnames.pidfile, | 
|  | #ifdef CONFIG_FSFREEZE | 
|  | QGA_FSFREEZE_HOOK_DEFAULT, | 
|  | #endif | 
|  | dfl_pathnames.state_dir); | 
|  | } | 
|  |  | 
|  | static const char *ga_log_level_str(GLogLevelFlags level) | 
|  | { | 
|  | switch (level & G_LOG_LEVEL_MASK) { | 
|  | case G_LOG_LEVEL_ERROR: | 
|  | return "error"; | 
|  | case G_LOG_LEVEL_CRITICAL: | 
|  | return "critical"; | 
|  | case G_LOG_LEVEL_WARNING: | 
|  | return "warning"; | 
|  | case G_LOG_LEVEL_MESSAGE: | 
|  | return "message"; | 
|  | case G_LOG_LEVEL_INFO: | 
|  | return "info"; | 
|  | case G_LOG_LEVEL_DEBUG: | 
|  | return "debug"; | 
|  | default: | 
|  | return "user"; | 
|  | } | 
|  | } | 
|  |  | 
|  | bool ga_logging_enabled(GAState *s) | 
|  | { | 
|  | return s->logging_enabled; | 
|  | } | 
|  |  | 
|  | void ga_disable_logging(GAState *s) | 
|  | { | 
|  | s->logging_enabled = false; | 
|  | } | 
|  |  | 
|  | void ga_enable_logging(GAState *s) | 
|  | { | 
|  | s->logging_enabled = true; | 
|  | } | 
|  |  | 
|  | static void ga_log(const gchar *domain, GLogLevelFlags level, | 
|  | const gchar *msg, gpointer opaque) | 
|  | { | 
|  | GAState *s = opaque; | 
|  | GTimeVal time; | 
|  | const char *level_str = ga_log_level_str(level); | 
|  |  | 
|  | if (!ga_logging_enabled(s)) { | 
|  | return; | 
|  | } | 
|  |  | 
|  | level &= G_LOG_LEVEL_MASK; | 
|  | #ifndef _WIN32 | 
|  | if (g_strcmp0(domain, "syslog") == 0) { | 
|  | syslog(LOG_INFO, "%s: %s", level_str, msg); | 
|  | } else if (level & s->log_level) { | 
|  | #else | 
|  | if (level & s->log_level) { | 
|  | #endif | 
|  | g_get_current_time(&time); | 
|  | fprintf(s->log_file, | 
|  | "%lu.%lu: %s: %s\n", time.tv_sec, time.tv_usec, level_str, msg); | 
|  | fflush(s->log_file); | 
|  | } | 
|  | } | 
|  |  | 
|  | void ga_set_response_delimited(GAState *s) | 
|  | { | 
|  | s->delimit_response = true; | 
|  | } | 
|  |  | 
|  | static FILE *ga_open_logfile(const char *logfile) | 
|  | { | 
|  | FILE *f; | 
|  |  | 
|  | f = fopen(logfile, "a"); | 
|  | if (!f) { | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | qemu_set_cloexec(fileno(f)); | 
|  | return f; | 
|  | } | 
|  |  | 
|  | #ifndef _WIN32 | 
|  | static bool ga_open_pidfile(const char *pidfile) | 
|  | { | 
|  | int pidfd; | 
|  | char pidstr[32]; | 
|  |  | 
|  | pidfd = qemu_open(pidfile, O_CREAT|O_WRONLY, S_IRUSR|S_IWUSR); | 
|  | if (pidfd == -1 || lockf(pidfd, F_TLOCK, 0)) { | 
|  | g_critical("Cannot lock pid file, %s", strerror(errno)); | 
|  | if (pidfd != -1) { | 
|  | close(pidfd); | 
|  | } | 
|  | return false; | 
|  | } | 
|  |  | 
|  | if (ftruncate(pidfd, 0)) { | 
|  | g_critical("Failed to truncate pid file"); | 
|  | goto fail; | 
|  | } | 
|  | snprintf(pidstr, sizeof(pidstr), "%d\n", getpid()); | 
|  | if (write(pidfd, pidstr, strlen(pidstr)) != strlen(pidstr)) { | 
|  | g_critical("Failed to write pid file"); | 
|  | goto fail; | 
|  | } | 
|  |  | 
|  | /* keep pidfile open & locked forever */ | 
|  | return true; | 
|  |  | 
|  | fail: | 
|  | unlink(pidfile); | 
|  | close(pidfd); | 
|  | return false; | 
|  | } | 
|  | #else /* _WIN32 */ | 
|  | static bool ga_open_pidfile(const char *pidfile) | 
|  | { | 
|  | return true; | 
|  | } | 
|  | #endif | 
|  |  | 
|  | static gint ga_strcmp(gconstpointer str1, gconstpointer str2) | 
|  | { | 
|  | return strcmp(str1, str2); | 
|  | } | 
|  |  | 
|  | /* disable commands that aren't safe for fsfreeze */ | 
|  | static void ga_disable_non_whitelisted(QmpCommand *cmd, void *opaque) | 
|  | { | 
|  | bool whitelisted = false; | 
|  | int i = 0; | 
|  | const char *name = qmp_command_name(cmd); | 
|  |  | 
|  | while (ga_freeze_whitelist[i] != NULL) { | 
|  | if (strcmp(name, ga_freeze_whitelist[i]) == 0) { | 
|  | whitelisted = true; | 
|  | } | 
|  | i++; | 
|  | } | 
|  | if (!whitelisted) { | 
|  | g_debug("disabling command: %s", name); | 
|  | qmp_disable_command(name); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* [re-]enable all commands, except those explicitly blacklisted by user */ | 
|  | static void ga_enable_non_blacklisted(QmpCommand *cmd, void *opaque) | 
|  | { | 
|  | GList *blacklist = opaque; | 
|  | const char *name = qmp_command_name(cmd); | 
|  |  | 
|  | if (g_list_find_custom(blacklist, name, ga_strcmp) == NULL && | 
|  | !qmp_command_is_enabled(cmd)) { | 
|  | g_debug("enabling command: %s", name); | 
|  | qmp_enable_command(name); | 
|  | } | 
|  | } | 
|  |  | 
|  | static bool ga_create_file(const char *path) | 
|  | { | 
|  | int fd = open(path, O_CREAT | O_WRONLY, S_IWUSR | S_IRUSR); | 
|  | if (fd == -1) { | 
|  | g_warning("unable to open/create file %s: %s", path, strerror(errno)); | 
|  | return false; | 
|  | } | 
|  | close(fd); | 
|  | return true; | 
|  | } | 
|  |  | 
|  | static bool ga_delete_file(const char *path) | 
|  | { | 
|  | int ret = unlink(path); | 
|  | if (ret == -1) { | 
|  | g_warning("unable to delete file: %s: %s", path, strerror(errno)); | 
|  | return false; | 
|  | } | 
|  |  | 
|  | return true; | 
|  | } | 
|  |  | 
|  | bool ga_is_frozen(GAState *s) | 
|  | { | 
|  | return s->frozen; | 
|  | } | 
|  |  | 
|  | void ga_set_frozen(GAState *s) | 
|  | { | 
|  | if (ga_is_frozen(s)) { | 
|  | return; | 
|  | } | 
|  | /* disable all non-whitelisted (for frozen state) commands */ | 
|  | qmp_for_each_command(ga_disable_non_whitelisted, NULL); | 
|  | g_warning("disabling logging due to filesystem freeze"); | 
|  | ga_disable_logging(s); | 
|  | s->frozen = true; | 
|  | if (!ga_create_file(s->state_filepath_isfrozen)) { | 
|  | g_warning("unable to create %s, fsfreeze may not function properly", | 
|  | s->state_filepath_isfrozen); | 
|  | } | 
|  | } | 
|  |  | 
|  | void ga_unset_frozen(GAState *s) | 
|  | { | 
|  | if (!ga_is_frozen(s)) { | 
|  | return; | 
|  | } | 
|  |  | 
|  | /* if we delayed creation/opening of pid/log files due to being | 
|  | * in a frozen state at start up, do it now | 
|  | */ | 
|  | if (s->deferred_options.log_filepath) { | 
|  | s->log_file = ga_open_logfile(s->deferred_options.log_filepath); | 
|  | if (!s->log_file) { | 
|  | s->log_file = stderr; | 
|  | } | 
|  | s->deferred_options.log_filepath = NULL; | 
|  | } | 
|  | ga_enable_logging(s); | 
|  | g_warning("logging re-enabled due to filesystem unfreeze"); | 
|  | if (s->deferred_options.pid_filepath) { | 
|  | if (!ga_open_pidfile(s->deferred_options.pid_filepath)) { | 
|  | g_warning("failed to create/open pid file"); | 
|  | } | 
|  | s->deferred_options.pid_filepath = NULL; | 
|  | } | 
|  |  | 
|  | /* enable all disabled, non-blacklisted commands */ | 
|  | qmp_for_each_command(ga_enable_non_blacklisted, s->blacklist); | 
|  | s->frozen = false; | 
|  | if (!ga_delete_file(s->state_filepath_isfrozen)) { | 
|  | g_warning("unable to delete %s, fsfreeze may not function properly", | 
|  | s->state_filepath_isfrozen); | 
|  | } | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_FSFREEZE | 
|  | const char *ga_fsfreeze_hook(GAState *s) | 
|  | { | 
|  | return s->fsfreeze_hook; | 
|  | } | 
|  | #endif | 
|  |  | 
|  | static void become_daemon(const char *pidfile) | 
|  | { | 
|  | #ifndef _WIN32 | 
|  | pid_t pid, sid; | 
|  |  | 
|  | pid = fork(); | 
|  | if (pid < 0) { | 
|  | exit(EXIT_FAILURE); | 
|  | } | 
|  | if (pid > 0) { | 
|  | exit(EXIT_SUCCESS); | 
|  | } | 
|  |  | 
|  | if (pidfile) { | 
|  | if (!ga_open_pidfile(pidfile)) { | 
|  | g_critical("failed to create pidfile"); | 
|  | exit(EXIT_FAILURE); | 
|  | } | 
|  | } | 
|  |  | 
|  | umask(S_IRWXG | S_IRWXO); | 
|  | sid = setsid(); | 
|  | if (sid < 0) { | 
|  | goto fail; | 
|  | } | 
|  | if ((chdir("/")) < 0) { | 
|  | goto fail; | 
|  | } | 
|  |  | 
|  | reopen_fd_to_null(STDIN_FILENO); | 
|  | reopen_fd_to_null(STDOUT_FILENO); | 
|  | reopen_fd_to_null(STDERR_FILENO); | 
|  | return; | 
|  |  | 
|  | fail: | 
|  | if (pidfile) { | 
|  | unlink(pidfile); | 
|  | } | 
|  | g_critical("failed to daemonize"); | 
|  | exit(EXIT_FAILURE); | 
|  | #endif | 
|  | } | 
|  |  | 
|  | static int send_response(GAState *s, QObject *payload) | 
|  | { | 
|  | const char *buf; | 
|  | QString *payload_qstr, *response_qstr; | 
|  | GIOStatus status; | 
|  |  | 
|  | g_assert(payload && s->channel); | 
|  |  | 
|  | payload_qstr = qobject_to_json(payload); | 
|  | if (!payload_qstr) { | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | if (s->delimit_response) { | 
|  | s->delimit_response = false; | 
|  | response_qstr = qstring_new(); | 
|  | qstring_append_chr(response_qstr, QGA_SENTINEL_BYTE); | 
|  | qstring_append(response_qstr, qstring_get_str(payload_qstr)); | 
|  | QDECREF(payload_qstr); | 
|  | } else { | 
|  | response_qstr = payload_qstr; | 
|  | } | 
|  |  | 
|  | qstring_append_chr(response_qstr, '\n'); | 
|  | buf = qstring_get_str(response_qstr); | 
|  | status = ga_channel_write_all(s->channel, buf, strlen(buf)); | 
|  | QDECREF(response_qstr); | 
|  | if (status != G_IO_STATUS_NORMAL) { | 
|  | return -EIO; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void process_command(GAState *s, QDict *req) | 
|  | { | 
|  | QObject *rsp = NULL; | 
|  | int ret; | 
|  |  | 
|  | g_assert(req); | 
|  | g_debug("processing command"); | 
|  | rsp = qmp_dispatch(QOBJECT(req)); | 
|  | if (rsp) { | 
|  | ret = send_response(s, rsp); | 
|  | if (ret) { | 
|  | g_warning("error sending response: %s", strerror(ret)); | 
|  | } | 
|  | qobject_decref(rsp); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* handle requests/control events coming in over the channel */ | 
|  | static void process_event(JSONMessageParser *parser, QList *tokens) | 
|  | { | 
|  | GAState *s = container_of(parser, GAState, parser); | 
|  | QDict *qdict; | 
|  | Error *err = NULL; | 
|  | int ret; | 
|  |  | 
|  | g_assert(s && parser); | 
|  |  | 
|  | g_debug("process_event: called"); | 
|  | qdict = qobject_to_qdict(json_parser_parse_err(tokens, NULL, &err)); | 
|  | if (err || !qdict) { | 
|  | QDECREF(qdict); | 
|  | qdict = qdict_new(); | 
|  | if (!err) { | 
|  | g_warning("failed to parse event: unknown error"); | 
|  | error_setg(&err, QERR_JSON_PARSING); | 
|  | } else { | 
|  | g_warning("failed to parse event: %s", error_get_pretty(err)); | 
|  | } | 
|  | qdict_put_obj(qdict, "error", qmp_build_error_object(err)); | 
|  | error_free(err); | 
|  | } | 
|  |  | 
|  | /* handle host->guest commands */ | 
|  | if (qdict_haskey(qdict, "execute")) { | 
|  | process_command(s, qdict); | 
|  | } else { | 
|  | if (!qdict_haskey(qdict, "error")) { | 
|  | QDECREF(qdict); | 
|  | qdict = qdict_new(); | 
|  | g_warning("unrecognized payload format"); | 
|  | error_setg(&err, QERR_UNSUPPORTED); | 
|  | qdict_put_obj(qdict, "error", qmp_build_error_object(err)); | 
|  | error_free(err); | 
|  | } | 
|  | ret = send_response(s, QOBJECT(qdict)); | 
|  | if (ret < 0) { | 
|  | g_warning("error sending error response: %s", strerror(-ret)); | 
|  | } | 
|  | } | 
|  |  | 
|  | QDECREF(qdict); | 
|  | } | 
|  |  | 
|  | /* false return signals GAChannel to close the current client connection */ | 
|  | static gboolean channel_event_cb(GIOCondition condition, gpointer data) | 
|  | { | 
|  | GAState *s = data; | 
|  | gchar buf[QGA_READ_COUNT_DEFAULT+1]; | 
|  | gsize count; | 
|  | GError *err = NULL; | 
|  | GIOStatus status = ga_channel_read(s->channel, buf, QGA_READ_COUNT_DEFAULT, &count); | 
|  | if (err != NULL) { | 
|  | g_warning("error reading channel: %s", err->message); | 
|  | g_error_free(err); | 
|  | return false; | 
|  | } | 
|  | switch (status) { | 
|  | case G_IO_STATUS_ERROR: | 
|  | g_warning("error reading channel"); | 
|  | return false; | 
|  | case G_IO_STATUS_NORMAL: | 
|  | buf[count] = 0; | 
|  | g_debug("read data, count: %d, data: %s", (int)count, buf); | 
|  | json_message_parser_feed(&s->parser, (char *)buf, (int)count); | 
|  | break; | 
|  | case G_IO_STATUS_EOF: | 
|  | g_debug("received EOF"); | 
|  | if (!s->virtio) { | 
|  | return false; | 
|  | } | 
|  | /* fall through */ | 
|  | case G_IO_STATUS_AGAIN: | 
|  | /* virtio causes us to spin here when no process is attached to | 
|  | * host-side chardev. sleep a bit to mitigate this | 
|  | */ | 
|  | if (s->virtio) { | 
|  | usleep(100*1000); | 
|  | } | 
|  | return true; | 
|  | default: | 
|  | g_warning("unknown channel read status, closing"); | 
|  | return false; | 
|  | } | 
|  | return true; | 
|  | } | 
|  |  | 
|  | static gboolean channel_init(GAState *s, const gchar *method, const gchar *path) | 
|  | { | 
|  | GAChannelMethod channel_method; | 
|  |  | 
|  | if (strcmp(method, "virtio-serial") == 0) { | 
|  | s->virtio = true; /* virtio requires special handling in some cases */ | 
|  | channel_method = GA_CHANNEL_VIRTIO_SERIAL; | 
|  | } else if (strcmp(method, "isa-serial") == 0) { | 
|  | channel_method = GA_CHANNEL_ISA_SERIAL; | 
|  | } else if (strcmp(method, "unix-listen") == 0) { | 
|  | channel_method = GA_CHANNEL_UNIX_LISTEN; | 
|  | } else { | 
|  | g_critical("unsupported channel method/type: %s", method); | 
|  | return false; | 
|  | } | 
|  |  | 
|  | s->channel = ga_channel_new(channel_method, path, channel_event_cb, s); | 
|  | if (!s->channel) { | 
|  | g_critical("failed to create guest agent channel"); | 
|  | return false; | 
|  | } | 
|  |  | 
|  | return true; | 
|  | } | 
|  |  | 
|  | #ifdef _WIN32 | 
|  | DWORD WINAPI service_ctrl_handler(DWORD ctrl, DWORD type, LPVOID data, | 
|  | LPVOID ctx) | 
|  | { | 
|  | DWORD ret = NO_ERROR; | 
|  | GAService *service = &ga_state->service; | 
|  |  | 
|  | switch (ctrl) | 
|  | { | 
|  | case SERVICE_CONTROL_STOP: | 
|  | case SERVICE_CONTROL_SHUTDOWN: | 
|  | quit_handler(SIGTERM); | 
|  | service->status.dwCurrentState = SERVICE_STOP_PENDING; | 
|  | SetServiceStatus(service->status_handle, &service->status); | 
|  | break; | 
|  |  | 
|  | default: | 
|  | ret = ERROR_CALL_NOT_IMPLEMENTED; | 
|  | } | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | VOID WINAPI service_main(DWORD argc, TCHAR *argv[]) | 
|  | { | 
|  | GAService *service = &ga_state->service; | 
|  |  | 
|  | service->status_handle = RegisterServiceCtrlHandlerEx(QGA_SERVICE_NAME, | 
|  | service_ctrl_handler, NULL); | 
|  |  | 
|  | if (service->status_handle == 0) { | 
|  | g_critical("Failed to register extended requests function!\n"); | 
|  | return; | 
|  | } | 
|  |  | 
|  | service->status.dwServiceType = SERVICE_WIN32; | 
|  | service->status.dwCurrentState = SERVICE_RUNNING; | 
|  | service->status.dwControlsAccepted = SERVICE_ACCEPT_STOP | SERVICE_ACCEPT_SHUTDOWN; | 
|  | service->status.dwWin32ExitCode = NO_ERROR; | 
|  | service->status.dwServiceSpecificExitCode = NO_ERROR; | 
|  | service->status.dwCheckPoint = 0; | 
|  | service->status.dwWaitHint = 0; | 
|  | SetServiceStatus(service->status_handle, &service->status); | 
|  |  | 
|  | g_main_loop_run(ga_state->main_loop); | 
|  |  | 
|  | service->status.dwCurrentState = SERVICE_STOPPED; | 
|  | SetServiceStatus(service->status_handle, &service->status); | 
|  | } | 
|  | #endif | 
|  |  | 
|  | static void set_persistent_state_defaults(GAPersistentState *pstate) | 
|  | { | 
|  | g_assert(pstate); | 
|  | pstate->fd_counter = QGA_PSTATE_DEFAULT_FD_COUNTER; | 
|  | } | 
|  |  | 
|  | static void persistent_state_from_keyfile(GAPersistentState *pstate, | 
|  | GKeyFile *keyfile) | 
|  | { | 
|  | g_assert(pstate); | 
|  | g_assert(keyfile); | 
|  | /* if any fields are missing, either because the file was tampered with | 
|  | * by agents of chaos, or because the field wasn't present at the time the | 
|  | * file was created, the best we can ever do is start over with the default | 
|  | * values. so load them now, and ignore any errors in accessing key-value | 
|  | * pairs | 
|  | */ | 
|  | set_persistent_state_defaults(pstate); | 
|  |  | 
|  | if (g_key_file_has_key(keyfile, "global", "fd_counter", NULL)) { | 
|  | pstate->fd_counter = | 
|  | g_key_file_get_integer(keyfile, "global", "fd_counter", NULL); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void persistent_state_to_keyfile(const GAPersistentState *pstate, | 
|  | GKeyFile *keyfile) | 
|  | { | 
|  | g_assert(pstate); | 
|  | g_assert(keyfile); | 
|  |  | 
|  | g_key_file_set_integer(keyfile, "global", "fd_counter", pstate->fd_counter); | 
|  | } | 
|  |  | 
|  | static gboolean write_persistent_state(const GAPersistentState *pstate, | 
|  | const gchar *path) | 
|  | { | 
|  | GKeyFile *keyfile = g_key_file_new(); | 
|  | GError *gerr = NULL; | 
|  | gboolean ret = true; | 
|  | gchar *data = NULL; | 
|  | gsize data_len; | 
|  |  | 
|  | g_assert(pstate); | 
|  |  | 
|  | persistent_state_to_keyfile(pstate, keyfile); | 
|  | data = g_key_file_to_data(keyfile, &data_len, &gerr); | 
|  | if (gerr) { | 
|  | g_critical("failed to convert persistent state to string: %s", | 
|  | gerr->message); | 
|  | ret = false; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | g_file_set_contents(path, data, data_len, &gerr); | 
|  | if (gerr) { | 
|  | g_critical("failed to write persistent state to %s: %s", | 
|  | path, gerr->message); | 
|  | ret = false; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | out: | 
|  | if (gerr) { | 
|  | g_error_free(gerr); | 
|  | } | 
|  | if (keyfile) { | 
|  | g_key_file_free(keyfile); | 
|  | } | 
|  | g_free(data); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static gboolean read_persistent_state(GAPersistentState *pstate, | 
|  | const gchar *path, gboolean frozen) | 
|  | { | 
|  | GKeyFile *keyfile = NULL; | 
|  | GError *gerr = NULL; | 
|  | struct stat st; | 
|  | gboolean ret = true; | 
|  |  | 
|  | g_assert(pstate); | 
|  |  | 
|  | if (stat(path, &st) == -1) { | 
|  | /* it's okay if state file doesn't exist, but any other error | 
|  | * indicates a permissions issue or some other misconfiguration | 
|  | * that we likely won't be able to recover from. | 
|  | */ | 
|  | if (errno != ENOENT) { | 
|  | g_critical("unable to access state file at path %s: %s", | 
|  | path, strerror(errno)); | 
|  | ret = false; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | /* file doesn't exist. initialize state to default values and | 
|  | * attempt to save now. (we could wait till later when we have | 
|  | * modified state we need to commit, but if there's a problem, | 
|  | * such as a missing parent directory, we want to catch it now) | 
|  | * | 
|  | * there is a potential scenario where someone either managed to | 
|  | * update the agent from a version that didn't use a key store | 
|  | * while qemu-ga thought the filesystem was frozen, or | 
|  | * deleted the key store prior to issuing a fsfreeze, prior | 
|  | * to restarting the agent. in this case we go ahead and defer | 
|  | * initial creation till we actually have modified state to | 
|  | * write, otherwise fail to recover from freeze. | 
|  | */ | 
|  | set_persistent_state_defaults(pstate); | 
|  | if (!frozen) { | 
|  | ret = write_persistent_state(pstate, path); | 
|  | if (!ret) { | 
|  | g_critical("unable to create state file at path %s", path); | 
|  | ret = false; | 
|  | goto out; | 
|  | } | 
|  | } | 
|  | ret = true; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | keyfile = g_key_file_new(); | 
|  | g_key_file_load_from_file(keyfile, path, 0, &gerr); | 
|  | if (gerr) { | 
|  | g_critical("error loading persistent state from path: %s, %s", | 
|  | path, gerr->message); | 
|  | ret = false; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | persistent_state_from_keyfile(pstate, keyfile); | 
|  |  | 
|  | out: | 
|  | if (keyfile) { | 
|  | g_key_file_free(keyfile); | 
|  | } | 
|  | if (gerr) { | 
|  | g_error_free(gerr); | 
|  | } | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | int64_t ga_get_fd_handle(GAState *s, Error **errp) | 
|  | { | 
|  | int64_t handle; | 
|  |  | 
|  | g_assert(s->pstate_filepath); | 
|  | /* we blacklist commands and avoid operations that potentially require | 
|  | * writing to disk when we're in a frozen state. this includes opening | 
|  | * new files, so we should never get here in that situation | 
|  | */ | 
|  | g_assert(!ga_is_frozen(s)); | 
|  |  | 
|  | handle = s->pstate.fd_counter++; | 
|  |  | 
|  | /* This should never happen on a reasonable timeframe, as guest-file-open | 
|  | * would have to be issued 2^63 times */ | 
|  | if (s->pstate.fd_counter == INT64_MAX) { | 
|  | abort(); | 
|  | } | 
|  |  | 
|  | if (!write_persistent_state(&s->pstate, s->pstate_filepath)) { | 
|  | error_setg(errp, "failed to commit persistent state to disk"); | 
|  | return -1; | 
|  | } | 
|  |  | 
|  | return handle; | 
|  | } | 
|  |  | 
|  | static void ga_print_cmd(QmpCommand *cmd, void *opaque) | 
|  | { | 
|  | printf("%s\n", qmp_command_name(cmd)); | 
|  | } | 
|  |  | 
|  | static GList *split_list(const gchar *str, const gchar *delim) | 
|  | { | 
|  | GList *list = NULL; | 
|  | int i; | 
|  | gchar **strv; | 
|  |  | 
|  | strv = g_strsplit(str, delim, -1); | 
|  | for (i = 0; strv[i]; i++) { | 
|  | list = g_list_prepend(list, strv[i]); | 
|  | } | 
|  | g_free(strv); | 
|  |  | 
|  | return list; | 
|  | } | 
|  |  | 
|  | typedef struct GAConfig { | 
|  | char *channel_path; | 
|  | char *method; | 
|  | char *log_filepath; | 
|  | char *pid_filepath; | 
|  | #ifdef CONFIG_FSFREEZE | 
|  | char *fsfreeze_hook; | 
|  | #endif | 
|  | char *state_dir; | 
|  | #ifdef _WIN32 | 
|  | const char *service; | 
|  | #endif | 
|  | gchar *bliststr; /* blacklist may point to this string */ | 
|  | GList *blacklist; | 
|  | int daemonize; | 
|  | GLogLevelFlags log_level; | 
|  | int dumpconf; | 
|  | } GAConfig; | 
|  |  | 
|  | static void config_load(GAConfig *config) | 
|  | { | 
|  | GError *gerr = NULL; | 
|  | GKeyFile *keyfile; | 
|  | const char *conf = g_getenv("QGA_CONF") ?: QGA_CONF_DEFAULT; | 
|  |  | 
|  | /* read system config */ | 
|  | keyfile = g_key_file_new(); | 
|  | if (!g_key_file_load_from_file(keyfile, conf, 0, &gerr)) { | 
|  | goto end; | 
|  | } | 
|  | if (g_key_file_has_key(keyfile, "general", "daemon", NULL)) { | 
|  | config->daemonize = | 
|  | g_key_file_get_boolean(keyfile, "general", "daemon", &gerr); | 
|  | } | 
|  | if (g_key_file_has_key(keyfile, "general", "method", NULL)) { | 
|  | config->method = | 
|  | g_key_file_get_string(keyfile, "general", "method", &gerr); | 
|  | } | 
|  | if (g_key_file_has_key(keyfile, "general", "path", NULL)) { | 
|  | config->channel_path = | 
|  | g_key_file_get_string(keyfile, "general", "path", &gerr); | 
|  | } | 
|  | if (g_key_file_has_key(keyfile, "general", "logfile", NULL)) { | 
|  | config->log_filepath = | 
|  | g_key_file_get_string(keyfile, "general", "logfile", &gerr); | 
|  | } | 
|  | if (g_key_file_has_key(keyfile, "general", "pidfile", NULL)) { | 
|  | config->pid_filepath = | 
|  | g_key_file_get_string(keyfile, "general", "pidfile", &gerr); | 
|  | } | 
|  | #ifdef CONFIG_FSFREEZE | 
|  | if (g_key_file_has_key(keyfile, "general", "fsfreeze-hook", NULL)) { | 
|  | config->fsfreeze_hook = | 
|  | g_key_file_get_string(keyfile, | 
|  | "general", "fsfreeze-hook", &gerr); | 
|  | } | 
|  | #endif | 
|  | if (g_key_file_has_key(keyfile, "general", "statedir", NULL)) { | 
|  | config->state_dir = | 
|  | g_key_file_get_string(keyfile, "general", "statedir", &gerr); | 
|  | } | 
|  | if (g_key_file_has_key(keyfile, "general", "verbose", NULL) && | 
|  | g_key_file_get_boolean(keyfile, "general", "verbose", &gerr)) { | 
|  | /* enable all log levels */ | 
|  | config->log_level = G_LOG_LEVEL_MASK; | 
|  | } | 
|  | if (g_key_file_has_key(keyfile, "general", "blacklist", NULL)) { | 
|  | config->bliststr = | 
|  | g_key_file_get_string(keyfile, "general", "blacklist", &gerr); | 
|  | config->blacklist = g_list_concat(config->blacklist, | 
|  | split_list(config->bliststr, ",")); | 
|  | } | 
|  |  | 
|  | end: | 
|  | g_key_file_free(keyfile); | 
|  | if (gerr && | 
|  | !(gerr->domain == G_FILE_ERROR && gerr->code == G_FILE_ERROR_NOENT)) { | 
|  | g_critical("error loading configuration from path: %s, %s", | 
|  | QGA_CONF_DEFAULT, gerr->message); | 
|  | exit(EXIT_FAILURE); | 
|  | } | 
|  | g_clear_error(&gerr); | 
|  | } | 
|  |  | 
|  | static gchar *list_join(GList *list, const gchar separator) | 
|  | { | 
|  | GString *str = g_string_new(""); | 
|  |  | 
|  | while (list) { | 
|  | str = g_string_append(str, (gchar *)list->data); | 
|  | list = g_list_next(list); | 
|  | if (list) { | 
|  | str = g_string_append_c(str, separator); | 
|  | } | 
|  | } | 
|  |  | 
|  | return g_string_free(str, FALSE); | 
|  | } | 
|  |  | 
|  | static void config_dump(GAConfig *config) | 
|  | { | 
|  | GError *error = NULL; | 
|  | GKeyFile *keyfile; | 
|  | gchar *tmp; | 
|  |  | 
|  | keyfile = g_key_file_new(); | 
|  | g_assert(keyfile); | 
|  |  | 
|  | g_key_file_set_boolean(keyfile, "general", "daemon", config->daemonize); | 
|  | g_key_file_set_string(keyfile, "general", "method", config->method); | 
|  | g_key_file_set_string(keyfile, "general", "path", config->channel_path); | 
|  | if (config->log_filepath) { | 
|  | g_key_file_set_string(keyfile, "general", "logfile", | 
|  | config->log_filepath); | 
|  | } | 
|  | g_key_file_set_string(keyfile, "general", "pidfile", config->pid_filepath); | 
|  | #ifdef CONFIG_FSFREEZE | 
|  | if (config->fsfreeze_hook) { | 
|  | g_key_file_set_string(keyfile, "general", "fsfreeze-hook", | 
|  | config->fsfreeze_hook); | 
|  | } | 
|  | #endif | 
|  | g_key_file_set_string(keyfile, "general", "statedir", config->state_dir); | 
|  | g_key_file_set_boolean(keyfile, "general", "verbose", | 
|  | config->log_level == G_LOG_LEVEL_MASK); | 
|  | tmp = list_join(config->blacklist, ','); | 
|  | g_key_file_set_string(keyfile, "general", "blacklist", tmp); | 
|  | g_free(tmp); | 
|  |  | 
|  | tmp = g_key_file_to_data(keyfile, NULL, &error); | 
|  | printf("%s", tmp); | 
|  |  | 
|  | g_free(tmp); | 
|  | g_key_file_free(keyfile); | 
|  | } | 
|  |  | 
|  | static void config_parse(GAConfig *config, int argc, char **argv) | 
|  | { | 
|  | const char *sopt = "hVvdm:p:l:f:F::b:s:t:D"; | 
|  | int opt_ind = 0, ch; | 
|  | const struct option lopt[] = { | 
|  | { "help", 0, NULL, 'h' }, | 
|  | { "version", 0, NULL, 'V' }, | 
|  | { "dump-conf", 0, NULL, 'D' }, | 
|  | { "logfile", 1, NULL, 'l' }, | 
|  | { "pidfile", 1, NULL, 'f' }, | 
|  | #ifdef CONFIG_FSFREEZE | 
|  | { "fsfreeze-hook", 2, NULL, 'F' }, | 
|  | #endif | 
|  | { "verbose", 0, NULL, 'v' }, | 
|  | { "method", 1, NULL, 'm' }, | 
|  | { "path", 1, NULL, 'p' }, | 
|  | { "daemonize", 0, NULL, 'd' }, | 
|  | { "blacklist", 1, NULL, 'b' }, | 
|  | #ifdef _WIN32 | 
|  | { "service", 1, NULL, 's' }, | 
|  | #endif | 
|  | { "statedir", 1, NULL, 't' }, | 
|  | { NULL, 0, NULL, 0 } | 
|  | }; | 
|  |  | 
|  | while ((ch = getopt_long(argc, argv, sopt, lopt, &opt_ind)) != -1) { | 
|  | switch (ch) { | 
|  | case 'm': | 
|  | g_free(config->method); | 
|  | config->method = g_strdup(optarg); | 
|  | break; | 
|  | case 'p': | 
|  | g_free(config->channel_path); | 
|  | config->channel_path = g_strdup(optarg); | 
|  | break; | 
|  | case 'l': | 
|  | g_free(config->log_filepath); | 
|  | config->log_filepath = g_strdup(optarg); | 
|  | break; | 
|  | case 'f': | 
|  | g_free(config->pid_filepath); | 
|  | config->pid_filepath = g_strdup(optarg); | 
|  | break; | 
|  | #ifdef CONFIG_FSFREEZE | 
|  | case 'F': | 
|  | g_free(config->fsfreeze_hook); | 
|  | config->fsfreeze_hook = g_strdup(optarg ?: QGA_FSFREEZE_HOOK_DEFAULT); | 
|  | break; | 
|  | #endif | 
|  | case 't': | 
|  | g_free(config->state_dir); | 
|  | config->state_dir = g_strdup(optarg); | 
|  | break; | 
|  | case 'v': | 
|  | /* enable all log levels */ | 
|  | config->log_level = G_LOG_LEVEL_MASK; | 
|  | break; | 
|  | case 'V': | 
|  | printf("QEMU Guest Agent %s\n", QEMU_VERSION); | 
|  | exit(EXIT_SUCCESS); | 
|  | case 'd': | 
|  | config->daemonize = 1; | 
|  | break; | 
|  | case 'D': | 
|  | config->dumpconf = 1; | 
|  | break; | 
|  | case 'b': { | 
|  | if (is_help_option(optarg)) { | 
|  | qmp_for_each_command(ga_print_cmd, NULL); | 
|  | exit(EXIT_SUCCESS); | 
|  | } | 
|  | config->blacklist = g_list_concat(config->blacklist, | 
|  | split_list(optarg, ",")); | 
|  | break; | 
|  | } | 
|  | #ifdef _WIN32 | 
|  | case 's': | 
|  | config->service = optarg; | 
|  | if (strcmp(config->service, "install") == 0) { | 
|  | if (ga_install_vss_provider()) { | 
|  | exit(EXIT_FAILURE); | 
|  | } | 
|  | if (ga_install_service(config->channel_path, | 
|  | config->log_filepath, config->state_dir)) { | 
|  | exit(EXIT_FAILURE); | 
|  | } | 
|  | exit(EXIT_SUCCESS); | 
|  | } else if (strcmp(config->service, "uninstall") == 0) { | 
|  | ga_uninstall_vss_provider(); | 
|  | exit(ga_uninstall_service()); | 
|  | } else if (strcmp(config->service, "vss-install") == 0) { | 
|  | if (ga_install_vss_provider()) { | 
|  | exit(EXIT_FAILURE); | 
|  | } | 
|  | exit(EXIT_SUCCESS); | 
|  | } else if (strcmp(config->service, "vss-uninstall") == 0) { | 
|  | ga_uninstall_vss_provider(); | 
|  | exit(EXIT_SUCCESS); | 
|  | } else { | 
|  | printf("Unknown service command.\n"); | 
|  | exit(EXIT_FAILURE); | 
|  | } | 
|  | break; | 
|  | #endif | 
|  | case 'h': | 
|  | usage(argv[0]); | 
|  | exit(EXIT_SUCCESS); | 
|  | case '?': | 
|  | g_print("Unknown option, try '%s --help' for more information.\n", | 
|  | argv[0]); | 
|  | exit(EXIT_FAILURE); | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | static void config_free(GAConfig *config) | 
|  | { | 
|  | g_free(config->method); | 
|  | g_free(config->log_filepath); | 
|  | g_free(config->pid_filepath); | 
|  | g_free(config->state_dir); | 
|  | g_free(config->channel_path); | 
|  | g_free(config->bliststr); | 
|  | #ifdef CONFIG_FSFREEZE | 
|  | g_free(config->fsfreeze_hook); | 
|  | #endif | 
|  | g_free(config); | 
|  | } | 
|  |  | 
|  | static bool check_is_frozen(GAState *s) | 
|  | { | 
|  | #ifndef _WIN32 | 
|  | /* check if a previous instance of qemu-ga exited with filesystems' state | 
|  | * marked as frozen. this could be a stale value (a non-qemu-ga process | 
|  | * or reboot may have since unfrozen them), but better to require an | 
|  | * uneeded unfreeze than to risk hanging on start-up | 
|  | */ | 
|  | struct stat st; | 
|  | if (stat(s->state_filepath_isfrozen, &st) == -1) { | 
|  | /* it's okay if the file doesn't exist, but if we can't access for | 
|  | * some other reason, such as permissions, there's a configuration | 
|  | * that needs to be addressed. so just bail now before we get into | 
|  | * more trouble later | 
|  | */ | 
|  | if (errno != ENOENT) { | 
|  | g_critical("unable to access state file at path %s: %s", | 
|  | s->state_filepath_isfrozen, strerror(errno)); | 
|  | return EXIT_FAILURE; | 
|  | } | 
|  | } else { | 
|  | g_warning("previous instance appears to have exited with frozen" | 
|  | " filesystems. deferring logging/pidfile creation and" | 
|  | " disabling non-fsfreeze-safe commands until" | 
|  | " guest-fsfreeze-thaw is issued, or filesystems are" | 
|  | " manually unfrozen and the file %s is removed", | 
|  | s->state_filepath_isfrozen); | 
|  | return true; | 
|  | } | 
|  | #endif | 
|  | return false; | 
|  | } | 
|  |  | 
|  | static int run_agent(GAState *s, GAConfig *config) | 
|  | { | 
|  | ga_state = s; | 
|  |  | 
|  | g_log_set_default_handler(ga_log, s); | 
|  | g_log_set_fatal_mask(NULL, G_LOG_LEVEL_ERROR); | 
|  | ga_enable_logging(s); | 
|  |  | 
|  | #ifdef _WIN32 | 
|  | /* On win32 the state directory is application specific (be it the default | 
|  | * or a user override). We got past the command line parsing; let's create | 
|  | * the directory (with any intermediate directories). If we run into an | 
|  | * error later on, we won't try to clean up the directory, it is considered | 
|  | * persistent. | 
|  | */ | 
|  | if (g_mkdir_with_parents(config->state_dir, S_IRWXU) == -1) { | 
|  | g_critical("unable to create (an ancestor of) the state directory" | 
|  | " '%s': %s", config->state_dir, strerror(errno)); | 
|  | return EXIT_FAILURE; | 
|  | } | 
|  | #endif | 
|  |  | 
|  | if (ga_is_frozen(s)) { | 
|  | if (config->daemonize) { | 
|  | /* delay opening/locking of pidfile till filesystems are unfrozen */ | 
|  | s->deferred_options.pid_filepath = config->pid_filepath; | 
|  | become_daemon(NULL); | 
|  | } | 
|  | if (config->log_filepath) { | 
|  | /* delay opening the log file till filesystems are unfrozen */ | 
|  | s->deferred_options.log_filepath = config->log_filepath; | 
|  | } | 
|  | ga_disable_logging(s); | 
|  | qmp_for_each_command(ga_disable_non_whitelisted, NULL); | 
|  | } else { | 
|  | if (config->daemonize) { | 
|  | become_daemon(config->pid_filepath); | 
|  | } | 
|  | if (config->log_filepath) { | 
|  | FILE *log_file = ga_open_logfile(config->log_filepath); | 
|  | if (!log_file) { | 
|  | g_critical("unable to open specified log file: %s", | 
|  | strerror(errno)); | 
|  | return EXIT_FAILURE; | 
|  | } | 
|  | s->log_file = log_file; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* load persistent state from disk */ | 
|  | if (!read_persistent_state(&s->pstate, | 
|  | s->pstate_filepath, | 
|  | ga_is_frozen(s))) { | 
|  | g_critical("failed to load persistent state"); | 
|  | return EXIT_FAILURE; | 
|  | } | 
|  |  | 
|  | config->blacklist = ga_command_blacklist_init(config->blacklist); | 
|  | if (config->blacklist) { | 
|  | GList *l = config->blacklist; | 
|  | s->blacklist = config->blacklist; | 
|  | do { | 
|  | g_debug("disabling command: %s", (char *)l->data); | 
|  | qmp_disable_command(l->data); | 
|  | l = g_list_next(l); | 
|  | } while (l); | 
|  | } | 
|  | s->command_state = ga_command_state_new(); | 
|  | ga_command_state_init(s, s->command_state); | 
|  | ga_command_state_init_all(s->command_state); | 
|  | json_message_parser_init(&s->parser, process_event); | 
|  | ga_state = s; | 
|  | #ifndef _WIN32 | 
|  | if (!register_signal_handlers()) { | 
|  | g_critical("failed to register signal handlers"); | 
|  | return EXIT_FAILURE; | 
|  | } | 
|  | #endif | 
|  |  | 
|  | s->main_loop = g_main_loop_new(NULL, false); | 
|  | if (!channel_init(ga_state, config->method, config->channel_path)) { | 
|  | g_critical("failed to initialize guest agent channel"); | 
|  | return EXIT_FAILURE; | 
|  | } | 
|  | #ifndef _WIN32 | 
|  | g_main_loop_run(ga_state->main_loop); | 
|  | #else | 
|  | if (config->daemonize) { | 
|  | SERVICE_TABLE_ENTRY service_table[] = { | 
|  | { (char *)QGA_SERVICE_NAME, service_main }, { NULL, NULL } }; | 
|  | StartServiceCtrlDispatcher(service_table); | 
|  | } else { | 
|  | g_main_loop_run(ga_state->main_loop); | 
|  | } | 
|  | #endif | 
|  |  | 
|  | return EXIT_SUCCESS; | 
|  | } | 
|  |  | 
|  | static void free_blacklist_entry(gpointer entry, gpointer unused) | 
|  | { | 
|  | g_free(entry); | 
|  | } | 
|  |  | 
|  | int main(int argc, char **argv) | 
|  | { | 
|  | int ret = EXIT_SUCCESS; | 
|  | GAState *s = g_new0(GAState, 1); | 
|  | GAConfig *config = g_new0(GAConfig, 1); | 
|  |  | 
|  | config->log_level = G_LOG_LEVEL_ERROR | G_LOG_LEVEL_CRITICAL; | 
|  |  | 
|  | module_call_init(MODULE_INIT_QAPI); | 
|  |  | 
|  | init_dfl_pathnames(); | 
|  | config_load(config); | 
|  | config_parse(config, argc, argv); | 
|  |  | 
|  | if (config->pid_filepath == NULL) { | 
|  | config->pid_filepath = g_strdup(dfl_pathnames.pidfile); | 
|  | } | 
|  |  | 
|  | if (config->state_dir == NULL) { | 
|  | config->state_dir = g_strdup(dfl_pathnames.state_dir); | 
|  | } | 
|  |  | 
|  | if (config->method == NULL) { | 
|  | config->method = g_strdup("virtio-serial"); | 
|  | } | 
|  |  | 
|  | if (config->channel_path == NULL) { | 
|  | if (strcmp(config->method, "virtio-serial") == 0) { | 
|  | /* try the default path for the virtio-serial port */ | 
|  | config->channel_path = g_strdup(QGA_VIRTIO_PATH_DEFAULT); | 
|  | } else if (strcmp(config->method, "isa-serial") == 0) { | 
|  | /* try the default path for the serial port - COM1 */ | 
|  | config->channel_path = g_strdup(QGA_SERIAL_PATH_DEFAULT); | 
|  | } else { | 
|  | g_critical("must specify a path for this channel"); | 
|  | ret = EXIT_FAILURE; | 
|  | goto end; | 
|  | } | 
|  | } | 
|  |  | 
|  | s->log_level = config->log_level; | 
|  | s->log_file = stderr; | 
|  | #ifdef CONFIG_FSFREEZE | 
|  | s->fsfreeze_hook = config->fsfreeze_hook; | 
|  | #endif | 
|  | s->pstate_filepath = g_strdup_printf("%s/qga.state", config->state_dir); | 
|  | s->state_filepath_isfrozen = g_strdup_printf("%s/qga.state.isfrozen", | 
|  | config->state_dir); | 
|  | s->frozen = check_is_frozen(s); | 
|  |  | 
|  | if (config->dumpconf) { | 
|  | config_dump(config); | 
|  | goto end; | 
|  | } | 
|  |  | 
|  | ret = run_agent(s, config); | 
|  |  | 
|  | end: | 
|  | if (s->command_state) { | 
|  | ga_command_state_cleanup_all(s->command_state); | 
|  | } | 
|  | if (s->channel) { | 
|  | ga_channel_free(s->channel); | 
|  | } | 
|  | g_list_foreach(config->blacklist, free_blacklist_entry, NULL); | 
|  | g_free(s->pstate_filepath); | 
|  | g_free(s->state_filepath_isfrozen); | 
|  |  | 
|  | if (config->daemonize) { | 
|  | unlink(config->pid_filepath); | 
|  | } | 
|  |  | 
|  | config_free(config); | 
|  |  | 
|  | return ret; | 
|  | } |