| /* |
| * INTC device simulation in PKUnity SoC |
| * |
| * Copyright (C) 2010-2012 Guan Xuetao |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation, or any later version. |
| * See the COPYING file in the top-level directory. |
| */ |
| #include "hw/sysbus.h" |
| |
| #undef DEBUG_PUV3 |
| #include "hw/unicore32/puv3.h" |
| |
| #define TYPE_PUV3_INTC "puv3_intc" |
| #define PUV3_INTC(obj) OBJECT_CHECK(PUV3INTCState, (obj), TYPE_PUV3_INTC) |
| |
| typedef struct PUV3INTCState { |
| SysBusDevice parent_obj; |
| |
| MemoryRegion iomem; |
| qemu_irq parent_irq; |
| |
| uint32_t reg_ICMR; |
| uint32_t reg_ICPR; |
| } PUV3INTCState; |
| |
| /* Update interrupt status after enabled or pending bits have been changed. */ |
| static void puv3_intc_update(PUV3INTCState *s) |
| { |
| if (s->reg_ICMR & s->reg_ICPR) { |
| qemu_irq_raise(s->parent_irq); |
| } else { |
| qemu_irq_lower(s->parent_irq); |
| } |
| } |
| |
| /* Process a change in an external INTC input. */ |
| static void puv3_intc_handler(void *opaque, int irq, int level) |
| { |
| PUV3INTCState *s = opaque; |
| |
| DPRINTF("irq 0x%x, level 0x%x\n", irq, level); |
| if (level) { |
| s->reg_ICPR |= (1 << irq); |
| } else { |
| s->reg_ICPR &= ~(1 << irq); |
| } |
| puv3_intc_update(s); |
| } |
| |
| static uint64_t puv3_intc_read(void *opaque, hwaddr offset, |
| unsigned size) |
| { |
| PUV3INTCState *s = opaque; |
| uint32_t ret = 0; |
| |
| switch (offset) { |
| case 0x04: /* INTC_ICMR */ |
| ret = s->reg_ICMR; |
| break; |
| case 0x0c: /* INTC_ICIP */ |
| ret = s->reg_ICPR; /* the same value with ICPR */ |
| break; |
| default: |
| DPRINTF("Bad offset %x\n", (int)offset); |
| } |
| DPRINTF("offset 0x%x, value 0x%x\n", offset, ret); |
| return ret; |
| } |
| |
| static void puv3_intc_write(void *opaque, hwaddr offset, |
| uint64_t value, unsigned size) |
| { |
| PUV3INTCState *s = opaque; |
| |
| DPRINTF("offset 0x%x, value 0x%x\n", offset, value); |
| switch (offset) { |
| case 0x00: /* INTC_ICLR */ |
| case 0x14: /* INTC_ICCR */ |
| break; |
| case 0x04: /* INTC_ICMR */ |
| s->reg_ICMR = value; |
| break; |
| default: |
| DPRINTF("Bad offset 0x%x\n", (int)offset); |
| return; |
| } |
| puv3_intc_update(s); |
| } |
| |
| static const MemoryRegionOps puv3_intc_ops = { |
| .read = puv3_intc_read, |
| .write = puv3_intc_write, |
| .impl = { |
| .min_access_size = 4, |
| .max_access_size = 4, |
| }, |
| .endianness = DEVICE_NATIVE_ENDIAN, |
| }; |
| |
| static int puv3_intc_init(SysBusDevice *sbd) |
| { |
| DeviceState *dev = DEVICE(sbd); |
| PUV3INTCState *s = PUV3_INTC(dev); |
| |
| qdev_init_gpio_in(dev, puv3_intc_handler, PUV3_IRQS_NR); |
| sysbus_init_irq(sbd, &s->parent_irq); |
| |
| s->reg_ICMR = 0; |
| s->reg_ICPR = 0; |
| |
| memory_region_init_io(&s->iomem, OBJECT(s), &puv3_intc_ops, s, "puv3_intc", |
| PUV3_REGS_OFFSET); |
| sysbus_init_mmio(sbd, &s->iomem); |
| |
| return 0; |
| } |
| |
| static void puv3_intc_class_init(ObjectClass *klass, void *data) |
| { |
| SysBusDeviceClass *sdc = SYS_BUS_DEVICE_CLASS(klass); |
| |
| sdc->init = puv3_intc_init; |
| } |
| |
| static const TypeInfo puv3_intc_info = { |
| .name = TYPE_PUV3_INTC, |
| .parent = TYPE_SYS_BUS_DEVICE, |
| .instance_size = sizeof(PUV3INTCState), |
| .class_init = puv3_intc_class_init, |
| }; |
| |
| static void puv3_intc_register_type(void) |
| { |
| type_register_static(&puv3_intc_info); |
| } |
| |
| type_init(puv3_intc_register_type) |