|  | /* | 
|  | * QEMU/MIPS pseudo-board | 
|  | * | 
|  | * emulates a simple machine with ISA-like bus. | 
|  | * ISA IO space mapped to the 0x14000000 (PHYS) and | 
|  | * ISA memory at the 0x10000000 (PHYS, 16Mb in size). | 
|  | * All peripherial devices are attached to this "bus" with | 
|  | * the standard PC ISA addresses. | 
|  | */ | 
|  | #include "hw.h" | 
|  | #include "mips.h" | 
|  | #include "pc.h" | 
|  | #include "isa.h" | 
|  | #include "net.h" | 
|  | #include "sysemu.h" | 
|  | #include "boards.h" | 
|  | #include "flash.h" | 
|  | #include "qemu-log.h" | 
|  |  | 
|  | #ifdef TARGET_WORDS_BIGENDIAN | 
|  | #define BIOS_FILENAME "mips_bios.bin" | 
|  | #else | 
|  | #define BIOS_FILENAME "mipsel_bios.bin" | 
|  | #endif | 
|  |  | 
|  | #define PHYS_TO_VIRT(x) ((x) | ~(target_ulong)0x7fffffff) | 
|  |  | 
|  | #define VIRT_TO_PHYS_ADDEND (-((int64_t)(int32_t)0x80000000)) | 
|  |  | 
|  | #define MAX_IDE_BUS 2 | 
|  |  | 
|  | static const int ide_iobase[2] = { 0x1f0, 0x170 }; | 
|  | static const int ide_iobase2[2] = { 0x3f6, 0x376 }; | 
|  | static const int ide_irq[2] = { 14, 15 }; | 
|  |  | 
|  | static int serial_io[MAX_SERIAL_PORTS] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8 }; | 
|  | static int serial_irq[MAX_SERIAL_PORTS] = { 4, 3, 4, 3 }; | 
|  |  | 
|  | static PITState *pit; /* PIT i8254 */ | 
|  |  | 
|  | /* i8254 PIT is attached to the IRQ0 at PIC i8259 */ | 
|  |  | 
|  | static struct _loaderparams { | 
|  | int ram_size; | 
|  | const char *kernel_filename; | 
|  | const char *kernel_cmdline; | 
|  | const char *initrd_filename; | 
|  | } loaderparams; | 
|  |  | 
|  | static void mips_qemu_writel (void *opaque, target_phys_addr_t addr, | 
|  | uint32_t val) | 
|  | { | 
|  | if ((addr & 0xffff) == 0 && val == 42) | 
|  | qemu_system_reset_request (); | 
|  | else if ((addr & 0xffff) == 4 && val == 42) | 
|  | qemu_system_shutdown_request (); | 
|  | } | 
|  |  | 
|  | static uint32_t mips_qemu_readl (void *opaque, target_phys_addr_t addr) | 
|  | { | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static CPUWriteMemoryFunc *mips_qemu_write[] = { | 
|  | &mips_qemu_writel, | 
|  | &mips_qemu_writel, | 
|  | &mips_qemu_writel, | 
|  | }; | 
|  |  | 
|  | static CPUReadMemoryFunc *mips_qemu_read[] = { | 
|  | &mips_qemu_readl, | 
|  | &mips_qemu_readl, | 
|  | &mips_qemu_readl, | 
|  | }; | 
|  |  | 
|  | static int mips_qemu_iomemtype = 0; | 
|  |  | 
|  | static void load_kernel (CPUState *env) | 
|  | { | 
|  | int64_t entry, kernel_low, kernel_high; | 
|  | long kernel_size, initrd_size; | 
|  | ram_addr_t initrd_offset; | 
|  | int ret; | 
|  |  | 
|  | kernel_size = load_elf(loaderparams.kernel_filename, VIRT_TO_PHYS_ADDEND, | 
|  | (uint64_t *)&entry, (uint64_t *)&kernel_low, | 
|  | (uint64_t *)&kernel_high); | 
|  | if (kernel_size >= 0) { | 
|  | if ((entry & ~0x7fffffffULL) == 0x80000000) | 
|  | entry = (int32_t)entry; | 
|  | env->active_tc.PC = entry; | 
|  | } else { | 
|  | fprintf(stderr, "qemu: could not load kernel '%s'\n", | 
|  | loaderparams.kernel_filename); | 
|  | exit(1); | 
|  | } | 
|  |  | 
|  | /* load initrd */ | 
|  | initrd_size = 0; | 
|  | initrd_offset = 0; | 
|  | if (loaderparams.initrd_filename) { | 
|  | initrd_size = get_image_size (loaderparams.initrd_filename); | 
|  | if (initrd_size > 0) { | 
|  | initrd_offset = (kernel_high + ~TARGET_PAGE_MASK) & TARGET_PAGE_MASK; | 
|  | if (initrd_offset + initrd_size > ram_size) { | 
|  | fprintf(stderr, | 
|  | "qemu: memory too small for initial ram disk '%s'\n", | 
|  | loaderparams.initrd_filename); | 
|  | exit(1); | 
|  | } | 
|  | initrd_size = load_image_targphys(loaderparams.initrd_filename, | 
|  | initrd_offset, | 
|  | ram_size - initrd_offset); | 
|  | } | 
|  | if (initrd_size == (target_ulong) -1) { | 
|  | fprintf(stderr, "qemu: could not load initial ram disk '%s'\n", | 
|  | loaderparams.initrd_filename); | 
|  | exit(1); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* Store command line.  */ | 
|  | if (initrd_size > 0) { | 
|  | char buf[64]; | 
|  | ret = snprintf(buf, 64, "rd_start=0x" TARGET_FMT_lx " rd_size=%li ", | 
|  | PHYS_TO_VIRT((uint32_t)initrd_offset), | 
|  | initrd_size); | 
|  | cpu_physical_memory_write((16 << 20) - 256, (void *)buf, 64); | 
|  | } else { | 
|  | ret = 0; | 
|  | } | 
|  | pstrcpy_targphys((16 << 20) - 256 + ret, 256, | 
|  | loaderparams.kernel_cmdline); | 
|  |  | 
|  | stl_phys((16 << 20) - 260, 0x12345678); | 
|  | stl_phys((16 << 20) - 264, ram_size); | 
|  | } | 
|  |  | 
|  | static void main_cpu_reset(void *opaque) | 
|  | { | 
|  | CPUState *env = opaque; | 
|  | cpu_reset(env); | 
|  |  | 
|  | if (loaderparams.kernel_filename) | 
|  | load_kernel (env); | 
|  | } | 
|  |  | 
|  | static const int sector_len = 32 * 1024; | 
|  | static | 
|  | void mips_r4k_init (ram_addr_t ram_size, int vga_ram_size, | 
|  | const char *boot_device, | 
|  | const char *kernel_filename, const char *kernel_cmdline, | 
|  | const char *initrd_filename, const char *cpu_model) | 
|  | { | 
|  | char buf[1024]; | 
|  | ram_addr_t ram_offset; | 
|  | ram_addr_t bios_offset; | 
|  | int bios_size; | 
|  | CPUState *env; | 
|  | RTCState *rtc_state; | 
|  | int i; | 
|  | qemu_irq *i8259; | 
|  | int index; | 
|  | BlockDriverState *hd[MAX_IDE_BUS * MAX_IDE_DEVS]; | 
|  |  | 
|  | /* init CPUs */ | 
|  | if (cpu_model == NULL) { | 
|  | #ifdef TARGET_MIPS64 | 
|  | cpu_model = "R4000"; | 
|  | #else | 
|  | cpu_model = "24Kf"; | 
|  | #endif | 
|  | } | 
|  | env = cpu_init(cpu_model); | 
|  | if (!env) { | 
|  | fprintf(stderr, "Unable to find CPU definition\n"); | 
|  | exit(1); | 
|  | } | 
|  | qemu_register_reset(main_cpu_reset, env); | 
|  |  | 
|  | /* allocate RAM */ | 
|  | if (ram_size > (256 << 20)) { | 
|  | fprintf(stderr, | 
|  | "qemu: Too much memory for this machine: %d MB, maximum 256 MB\n", | 
|  | ((unsigned int)ram_size / (1 << 20))); | 
|  | exit(1); | 
|  | } | 
|  | ram_offset = qemu_ram_alloc(ram_size); | 
|  |  | 
|  | cpu_register_physical_memory(0, ram_size, ram_offset | IO_MEM_RAM); | 
|  |  | 
|  | if (!mips_qemu_iomemtype) { | 
|  | mips_qemu_iomemtype = cpu_register_io_memory(0, mips_qemu_read, | 
|  | mips_qemu_write, NULL); | 
|  | } | 
|  | cpu_register_physical_memory(0x1fbf0000, 0x10000, mips_qemu_iomemtype); | 
|  |  | 
|  | /* Try to load a BIOS image. If this fails, we continue regardless, | 
|  | but initialize the hardware ourselves. When a kernel gets | 
|  | preloaded we also initialize the hardware, since the BIOS wasn't | 
|  | run. */ | 
|  | if (bios_name == NULL) | 
|  | bios_name = BIOS_FILENAME; | 
|  | snprintf(buf, sizeof(buf), "%s/%s", bios_dir, bios_name); | 
|  | bios_size = get_image_size(buf); | 
|  | if ((bios_size > 0) && (bios_size <= BIOS_SIZE)) { | 
|  | bios_offset = qemu_ram_alloc(BIOS_SIZE); | 
|  | cpu_register_physical_memory(0x1fc00000, BIOS_SIZE, | 
|  | bios_offset | IO_MEM_ROM); | 
|  |  | 
|  | load_image_targphys(buf, 0x1fc00000, BIOS_SIZE); | 
|  | } else if ((index = drive_get_index(IF_PFLASH, 0, 0)) > -1) { | 
|  | uint32_t mips_rom = 0x00400000; | 
|  | bios_offset = qemu_ram_alloc(mips_rom); | 
|  | if (!pflash_cfi01_register(0x1fc00000, bios_offset, | 
|  | drives_table[index].bdrv, sector_len, mips_rom / sector_len, | 
|  | 4, 0, 0, 0, 0)) { | 
|  | fprintf(stderr, "qemu: Error registering flash memory.\n"); | 
|  | } | 
|  | } | 
|  | else { | 
|  | /* not fatal */ | 
|  | fprintf(stderr, "qemu: Warning, could not load MIPS bios '%s'\n", | 
|  | buf); | 
|  | } | 
|  |  | 
|  | if (kernel_filename) { | 
|  | loaderparams.ram_size = ram_size; | 
|  | loaderparams.kernel_filename = kernel_filename; | 
|  | loaderparams.kernel_cmdline = kernel_cmdline; | 
|  | loaderparams.initrd_filename = initrd_filename; | 
|  | load_kernel (env); | 
|  | } | 
|  |  | 
|  | /* Init CPU internal devices */ | 
|  | cpu_mips_irq_init_cpu(env); | 
|  | cpu_mips_clock_init(env); | 
|  |  | 
|  | /* The PIC is attached to the MIPS CPU INT0 pin */ | 
|  | i8259 = i8259_init(env->irq[2]); | 
|  |  | 
|  | rtc_state = rtc_init(0x70, i8259[8], 2000); | 
|  |  | 
|  | /* Register 64 KB of ISA IO space at 0x14000000 */ | 
|  | isa_mmio_init(0x14000000, 0x00010000); | 
|  | isa_mem_base = 0x10000000; | 
|  |  | 
|  | pit = pit_init(0x40, i8259[0]); | 
|  |  | 
|  | for(i = 0; i < MAX_SERIAL_PORTS; i++) { | 
|  | if (serial_hds[i]) { | 
|  | serial_init(serial_io[i], i8259[serial_irq[i]], 115200, | 
|  | serial_hds[i]); | 
|  | } | 
|  | } | 
|  |  | 
|  | isa_vga_init(vga_ram_size); | 
|  |  | 
|  | if (nd_table[0].vlan) | 
|  | isa_ne2000_init(0x300, i8259[9], &nd_table[0]); | 
|  |  | 
|  | if (drive_get_max_bus(IF_IDE) >= MAX_IDE_BUS) { | 
|  | fprintf(stderr, "qemu: too many IDE bus\n"); | 
|  | exit(1); | 
|  | } | 
|  |  | 
|  | for(i = 0; i < MAX_IDE_BUS * MAX_IDE_DEVS; i++) { | 
|  | index = drive_get_index(IF_IDE, i / MAX_IDE_DEVS, i % MAX_IDE_DEVS); | 
|  | if (index != -1) | 
|  | hd[i] = drives_table[index].bdrv; | 
|  | else | 
|  | hd[i] = NULL; | 
|  | } | 
|  |  | 
|  | for(i = 0; i < MAX_IDE_BUS; i++) | 
|  | isa_ide_init(ide_iobase[i], ide_iobase2[i], i8259[ide_irq[i]], | 
|  | hd[MAX_IDE_DEVS * i], | 
|  | hd[MAX_IDE_DEVS * i + 1]); | 
|  |  | 
|  | i8042_init(i8259[1], i8259[12], 0x60); | 
|  | } | 
|  |  | 
|  | QEMUMachine mips_machine = { | 
|  | .name = "mips", | 
|  | .desc = "mips r4k platform", | 
|  | .init = mips_r4k_init, | 
|  | .ram_require = VGA_RAM_SIZE + BIOS_SIZE, | 
|  | }; |