Makefile

# Makefile for QEMU.

# Always point to the root of the build tree (needs GNU make).
BUILD_DIR=$(CURDIR)

# All following code might depend on configuration variables
ifneq ($(wildcard config-host.mak),)
# Put the all: rule here so that config-host.mak can contain dependencies.
all:
include config-host.mak

# Check that we're not trying to do an out-of-tree build from
# a tree that's been used for an in-tree build.
ifneq ($(realpath $(SRC_PATH)),$(realpath .))
ifneq ($(wildcard $(SRC_PATH)/config-host.mak),)
$(error This is an out of tree build but your source tree ($(SRC_PATH)) \
seems to have been used for an in-tree build. You can fix this by running \
"make distclean && rm -rf *-linux-user *-softmmu" in your source tree)
endif
endif

CONFIG_SOFTMMU := $(if $(filter %-softmmu,$(TARGET_DIRS)),y)
CONFIG_USER_ONLY := $(if $(filter %-user,$(TARGET_DIRS)),y)
CONFIG_ALL=y
-include config-all-devices.mak
-include config-all-disas.mak

include $(SRC_PATH)/rules.mak
config-host.mak: $(SRC_PATH)/configure
	@echo $@ is out-of-date, running configure
	@# TODO: The next lines include code which supports a smooth
	@# transition from old configurations without config.status.
	@# This code can be removed after QEMU 1.7.
	@if test -x config.status; then \
	    ./config.status; \
        else \
	    sed -n "/.*Configured with/s/[^:]*: //p" $@ | sh; \
	fi
else
config-host.mak:
ifneq ($(filter-out %clean,$(MAKECMDGOALS)),$(if $(MAKECMDGOALS),,fail))
	@echo "Please call configure before running make!"
	@exit 1
endif
endif

GENERATED_HEADERS = config-host.h qemu-options.def
GENERATED_HEADERS += qmp-commands.h qapi-types.h qapi-visit.h
GENERATED_SOURCES += qmp-marshal.c qapi-types.c qapi-visit.c

GENERATED_HEADERS += trace/generated-events.h
GENERATED_SOURCES += trace/generated-events.c

GENERATED_HEADERS += trace/generated-tracers.h
ifeq ($(TRACE_BACKEND),dtrace)
GENERATED_HEADERS += trace/generated-tracers-dtrace.h
endif
GENERATED_SOURCES += trace/generated-tracers.c

ifeq ($(TRACE_BACKEND),ust)
GENERATED_HEADERS += trace/generated-ust-provider.h
GENERATED_SOURCES += trace/generated-ust.c
endif

# Don't try to regenerate Makefile or configure
# We don't generate any of them
Makefile: ;
configure: ;

.PHONY: all clean cscope distclean dvi html info install install-doc \
	pdf recurse-all speed test dist

$(call set-vpath, $(SRC_PATH))

LIBS+=-lz $(LIBS_TOOLS)

HELPERS-$(CONFIG_LINUX) = qemu-bridge-helper$(EXESUF)

ifdef BUILD_DOCS
DOCS=qemu-doc.html qemu-tech.html qemu.1 qemu-img.1 qemu-nbd.8 qmp-commands.txt
ifdef CONFIG_VIRTFS
DOCS+=fsdev/virtfs-proxy-helper.1
endif
else
DOCS=
endif

SUBDIR_MAKEFLAGS=$(if $(V),,--no-print-directory) BUILD_DIR=$(BUILD_DIR)
SUBDIR_DEVICES_MAK=$(patsubst %, %/config-devices.mak, $(TARGET_DIRS))
SUBDIR_DEVICES_MAK_DEP=$(patsubst %, %-config-devices.mak.d, $(TARGET_DIRS))

ifeq ($(SUBDIR_DEVICES_MAK),)
config-all-devices.mak:
	$(call quiet-command,echo '# no devices' > $@,"  GEN   $@")
else
config-all-devices.mak: $(SUBDIR_DEVICES_MAK)
	$(call quiet-command, sed -n \
             's|^\([^=]*\)=\(.*\)$$|\1:=$$(findstring y,$$(\1)\2)|p' \
             $(SUBDIR_DEVICES_MAK) | sort -u > $@, \
             "  GEN   $@")
endif

-include $(SUBDIR_DEVICES_MAK_DEP)

%/config-devices.mak: default-configs/%.mak
	$(call quiet-command,$(SHELL) $(SRC_PATH)/scripts/make_device_config.sh $@ $<, "  GEN   $@")
	@if test -f $@; then \
	  if cmp -s $@.old $@; then \
	    mv $@.tmp $@; \
	    cp -p $@ $@.old; \
	  else \
	    if test -f $@.old; then \
	      echo "WARNING: $@ (user modified) out of date.";\
	    else \
	      echo "WARNING: $@ out of date.";\
	    fi; \
	    echo "Run \"make defconfig\" to regenerate."; \
	    rm $@.tmp; \
	  fi; \
	 else \
	  mv $@.tmp $@; \
	  cp -p $@ $@.old; \
	 fi

defconfig:
	rm -f config-all-devices.mak $(SUBDIR_DEVICES_MAK)

ifneq ($(wildcard config-host.mak),)
include $(SRC_PATH)/Makefile.objs
endif

dummy := $(call unnest-vars,, \
                stub-obj-y \
                util-obj-y \
                qga-obj-y \
                qga-vss-dll-obj-y \
                block-obj-y \
                block-obj-m \
                common-obj-y \
                common-obj-m)

ifneq ($(wildcard config-host.mak),)
include $(SRC_PATH)/tests/Makefile
endif
ifeq ($(CONFIG_SMARTCARD_NSS),y)
include $(SRC_PATH)/libcacard/Makefile
endif

all: $(DOCS) $(TOOLS) $(HELPERS-y) recurse-all modules

config-host.h: config-host.h-timestamp
config-host.h-timestamp: config-host.mak
qemu-options.def: $(SRC_PATH)/qemu-options.hx
	$(call quiet-command,sh $(SRC_PATH)/scripts/hxtool -h < $< > $@,"  GEN   $@")

SUBDIR_RULES=$(patsubst %,subdir-%, $(TARGET_DIRS))
SOFTMMU_SUBDIR_RULES=$(filter %-softmmu,$(SUBDIR_RULES))

$(SOFTMMU_SUBDIR_RULES): $(block-obj-y)
$(SOFTMMU_SUBDIR_RULES): config-all-devices.mak

subdir-%:
	$(call quiet-command,$(MAKE) $(SUBDIR_MAKEFLAGS) -C $* V="$(V)" TARGET_DIR="$*/" all,)

subdir-pixman: pixman/Makefile
	$(call quiet-command,$(MAKE) $(SUBDIR_MAKEFLAGS) -C pixman V="$(V)" all,)

pixman/Makefile: $(SRC_PATH)/pixman/configure
	(cd pixman; CFLAGS="$(CFLAGS) -fPIC $(extra_cflags) $(extra_ldflags)" $(SRC_PATH)/pixman/configure $(AUTOCONF_HOST) --disable-gtk --disable-shared --enable-static)

$(SRC_PATH)/pixman/configure:
	(cd $(SRC_PATH)/pixman; autoreconf -v --install)

DTC_MAKE_ARGS=-I$(SRC_PATH)/dtc VPATH=$(SRC_PATH)/dtc -C dtc V="$(V)" LIBFDT_srcdir=$(SRC_PATH)/dtc/libfdt
DTC_CFLAGS=$(CFLAGS) $(QEMU_CFLAGS)
DTC_CPPFLAGS=-I$(BUILD_DIR)/dtc -I$(SRC_PATH)/dtc -I$(SRC_PATH)/dtc/libfdt

subdir-dtc:dtc/libfdt dtc/tests
	$(call quiet-command,$(MAKE) $(DTC_MAKE_ARGS) CPPFLAGS="$(DTC_CPPFLAGS)" CFLAGS="$(DTC_CFLAGS)" LDFLAGS="$(LDFLAGS)" ARFLAGS="$(ARFLAGS)" CC="$(CC)" AR="$(AR)" LD="$(LD)" $(SUBDIR_MAKEFLAGS) libfdt/libfdt.a,)

dtc/%:
	mkdir -p $@

$(SUBDIR_RULES): libqemuutil.a libqemustub.a $(common-obj-y)

ROMSUBDIR_RULES=$(patsubst %,romsubdir-%, $(ROMS))
romsubdir-%:
	$(call quiet-command,$(MAKE) $(SUBDIR_MAKEFLAGS) -C pc-bios/$* V="$(V)" TARGET_DIR="$*/",)

ALL_SUBDIRS=$(TARGET_DIRS) $(patsubst %,pc-bios/%, $(ROMS))

recurse-all: $(SUBDIR_RULES) $(ROMSUBDIR_RULES)

$(BUILD_DIR)/version.o: $(SRC_PATH)/version.rc $(BUILD_DIR)/config-host.h | $(BUILD_DIR)/version.lo
	$(call quiet-command,$(WINDRES) -I$(BUILD_DIR) -o $@ $<,"  RC    version.o")
$(BUILD_DIR)/version.lo: $(SRC_PATH)/version.rc $(BUILD_DIR)/config-host.h
	$(call quiet-command,$(WINDRES) -I$(BUILD_DIR) -o $@ $<,"  RC    version.lo")

Makefile: $(version-obj-y) $(version-lobj-y)

######################################################################
# Build libraries

libqemustub.a: $(stub-obj-y)
libqemuutil.a: $(util-obj-y) qapi-types.o qapi-visit.o

block-modules = $(foreach o,$(block-obj-m),"$(basename $(subst /,-,$o))",) NULL
util/module.o-cflags = -D'CONFIG_BLOCK_MODULES=$(block-modules)'

######################################################################

qemu-img.o: qemu-img-cmds.h

qemu-img$(EXESUF): qemu-img.o $(block-obj-y) libqemuutil.a libqemustub.a
qemu-nbd$(EXESUF): qemu-nbd.o $(block-obj-y) libqemuutil.a libqemustub.a
qemu-io$(EXESUF): qemu-io.o $(block-obj-y) libqemuutil.a libqemustub.a

qemu-bridge-helper$(EXESUF): qemu-bridge-helper.o

fsdev/virtfs-proxy-helper$(EXESUF): fsdev/virtfs-proxy-helper.o fsdev/virtio-9p-marshal.o libqemuutil.a libqemustub.a
fsdev/virtfs-proxy-helper$(EXESUF): LIBS += -lcap

qemu-img-cmds.h: $(SRC_PATH)/qemu-img-cmds.hx
	$(call quiet-command,sh $(SRC_PATH)/scripts/hxtool -h < $< > $@,"  GEN   $@")

qemu-ga$(EXESUF): LIBS = $(LIBS_QGA)
qemu-ga$(EXESUF): QEMU_CFLAGS += -I qga/qapi-generated

gen-out-type = $(subst .,-,$(suffix $@))

qapi-py = $(SRC_PATH)/scripts/qapi.py $(SRC_PATH)/scripts/ordereddict.py

qga/qapi-generated/qga-qapi-types.c qga/qapi-generated/qga-qapi-types.h :\
$(SRC_PATH)/qga/qapi-schema.json $(SRC_PATH)/scripts/qapi-types.py $(qapi-py)
	$(call quiet-command,$(PYTHON) $(SRC_PATH)/scripts/qapi-types.py \
		$(gen-out-type) -o qga/qapi-generated -p "qga-" -i $<, \
		"  GEN   $@")
qga/qapi-generated/qga-qapi-visit.c qga/qapi-generated/qga-qapi-visit.h :\
$(SRC_PATH)/qga/qapi-schema.json $(SRC_PATH)/scripts/qapi-visit.py $(qapi-py)
	$(call quiet-command,$(PYTHON) $(SRC_PATH)/scripts/qapi-visit.py \
		$(gen-out-type) -o qga/qapi-generated -p "qga-" -i $<, \
		"  GEN   $@")
qga/qapi-generated/qga-qmp-commands.h qga/qapi-generated/qga-qmp-marshal.c :\
$(SRC_PATH)/qga/qapi-schema.json $(SRC_PATH)/scripts/qapi-commands.py $(qapi-py)
	$(call quiet-command,$(PYTHON) $(SRC_PATH)/scripts/qapi-commands.py \
		$(gen-out-type) -o qga/qapi-generated -p "qga-" -i $<, \
		"  GEN   $@")

qapi-types.c qapi-types.h :\
$(SRC_PATH)/qapi-schema.json $(SRC_PATH)/scripts/qapi-types.py $(qapi-py)
	$(call quiet-command,$(PYTHON) $(SRC_PATH)/scripts/qapi-types.py \
		$(gen-out-type) -o "." -b -i $<, \
		"  GEN   $@")
qapi-visit.c qapi-visit.h :\
$(SRC_PATH)/qapi-schema.json $(SRC_PATH)/scripts/qapi-visit.py $(qapi-py)
	$(call quiet-command,$(PYTHON) $(SRC_PATH)/scripts/qapi-visit.py \
		$(gen-out-type) -o "." -b -i $<, \
		"  GEN   $@")
qmp-commands.h qmp-marshal.c :\
$(SRC_PATH)/qapi-schema.json $(SRC_PATH)/scripts/qapi-commands.py $(qapi-py)
	$(call quiet-command,$(PYTHON) $(SRC_PATH)/scripts/qapi-commands.py \
		$(gen-out-type) -o "." -m -i $<, \
		"  GEN   $@")

QGALIB_GEN=$(addprefix qga/qapi-generated/, qga-qapi-types.h qga-qapi-visit.h qga-qmp-commands.h)
$(qga-obj-y) qemu-ga.o: $(QGALIB_GEN)

qemu-ga$(EXESUF): $(qga-obj-y) libqemuutil.a libqemustub.a
	$(call LINK, $^)

clean:
# avoid old build problems by removing potentially incorrect old files
	rm -f config.mak op-i386.h opc-i386.h gen-op-i386.h op-arm.h opc-arm.h gen-op-arm.h
	rm -f qemu-options.def
	find . \( -name '*.l[oa]' -o -name '*.so' -o -name '*.dll' -o -name '*.mo' -o -name '*.[oda]' \) -type f -exec rm {} +
	rm -f $(filter-out %.tlb,$(TOOLS)) $(HELPERS-y) qemu-ga TAGS cscope.* *.pod *~ */*~
	rm -f fsdev/*.pod
	rm -rf .libs */.libs
	rm -f qemu-img-cmds.h
	@# May not be present in GENERATED_HEADERS
	rm -f trace/generated-tracers-dtrace.dtrace*
	rm -f trace/generated-tracers-dtrace.h*
	rm -f $(foreach f,$(GENERATED_HEADERS),$(f) $(f)-timestamp)
	rm -f $(foreach f,$(GENERATED_SOURCES),$(f) $(f)-timestamp)
	rm -rf qapi-generated
	rm -rf qga/qapi-generated
	for d in $(ALL_SUBDIRS); do \
	if test -d $$d; then $(MAKE) -C $$d $@ || exit 1; fi; \
	rm -f $$d/qemu-options.def; \
        done

VERSION ?= $(shell cat VERSION)

dist: qemu-$(VERSION).tar.bz2

qemu-%.tar.bz2:
	$(SRC_PATH)/scripts/make-release "$(SRC_PATH)" "$(patsubst qemu-%.tar.bz2,%,$@)"

distclean: clean
	rm -f config-host.mak config-host.h* config-host.ld $(DOCS) qemu-options.texi qemu-img-cmds.texi qemu-monitor.texi
	rm -f config-all-devices.mak config-all-disas.mak
	rm -f po/*.mo
	rm -f roms/seabios/config.mak roms/vgabios/config.mak
	rm -f qemu-doc.info qemu-doc.aux qemu-doc.cp qemu-doc.cps qemu-doc.dvi
	rm -f qemu-doc.fn qemu-doc.fns qemu-doc.info qemu-doc.ky qemu-doc.kys
	rm -f qemu-doc.log qemu-doc.pdf qemu-doc.pg qemu-doc.toc qemu-doc.tp
	rm -f qemu-doc.vr
	rm -f config.log
	rm -f linux-headers/asm
	rm -f qemu-tech.info qemu-tech.aux qemu-tech.cp qemu-tech.dvi qemu-tech.fn qemu-tech.info qemu-tech.ky qemu-tech.log qemu-tech.pdf qemu-tech.pg qemu-tech.toc qemu-tech.tp qemu-tech.vr
	for d in $(TARGET_DIRS); do \
	rm -rf $$d || exit 1 ; \
        done
	rm -Rf .sdk
	if test -f pixman/config.log; then make -C pixman distclean; fi
	if test -f dtc/version_gen.h; then make $(DTC_MAKE_ARGS) clean; fi

KEYMAPS=da     en-gb  et  fr     fr-ch  is  lt  modifiers  no  pt-br  sv \
ar      de     en-us  fi  fr-be  hr     it  lv  nl         pl  ru     th \
common  de-ch  es     fo  fr-ca  hu     ja  mk  nl-be      pt  sl     tr \
bepo    cz

ifdef INSTALL_BLOBS
BLOBS=bios.bin bios-256k.bin sgabios.bin vgabios.bin vgabios-cirrus.bin \
vgabios-stdvga.bin vgabios-vmware.bin vgabios-qxl.bin \
acpi-dsdt.aml q35-acpi-dsdt.aml \
ppc_rom.bin openbios-sparc32 openbios-sparc64 openbios-ppc QEMU,tcx.bin QEMU,cgthree.bin \
pxe-e1000.rom pxe-eepro100.rom pxe-ne2k_pci.rom \
pxe-pcnet.rom pxe-rtl8139.rom pxe-virtio.rom \
efi-e1000.rom efi-eepro100.rom efi-ne2k_pci.rom \
efi-pcnet.rom efi-rtl8139.rom efi-virtio.rom \
qemu-icon.bmp qemu_logo_no_text.svg \
bamboo.dtb petalogix-s3adsp1800.dtb petalogix-ml605.dtb \
multiboot.bin linuxboot.bin kvmvapic.bin \
s390-zipl.rom \
s390-ccw.img \
spapr-rtas.bin slof.bin \
palcode-clipper
else
BLOBS=
endif

install-doc: $(DOCS)
	$(INSTALL_DIR) "$(DESTDIR)$(qemu_docdir)"
	$(INSTALL_DATA) qemu-doc.html  qemu-tech.html "$(DESTDIR)$(qemu_docdir)"
	$(INSTALL_DATA) qmp-commands.txt "$(DESTDIR)$(qemu_docdir)"
ifdef CONFIG_POSIX
	$(INSTALL_DIR) "$(DESTDIR)$(mandir)/man1"
	$(INSTALL_DATA) qemu.1 "$(DESTDIR)$(mandir)/man1"
ifneq ($(TOOLS),)
	$(INSTALL_DATA) qemu-img.1 "$(DESTDIR)$(mandir)/man1"
	$(INSTALL_DIR) "$(DESTDIR)$(mandir)/man8"
	$(INSTALL_DATA) qemu-nbd.8 "$(DESTDIR)$(mandir)/man8"
endif
endif
ifdef CONFIG_VIRTFS
	$(INSTALL_DIR) "$(DESTDIR)$(mandir)/man1"
	$(INSTALL_DATA) fsdev/virtfs-proxy-helper.1 "$(DESTDIR)$(mandir)/man1"
endif

install-datadir:
	$(INSTALL_DIR) "$(DESTDIR)$(qemu_datadir)"

install-localstatedir:
ifdef CONFIG_POSIX
ifneq (,$(findstring qemu-ga,$(TOOLS)))
	$(INSTALL_DIR) "$(DESTDIR)$(qemu_localstatedir)"/run
endif
endif

install-confdir:
	$(INSTALL_DIR) "$(DESTDIR)$(qemu_confdir)"

install-sysconfig: install-datadir install-confdir
	$(INSTALL_DATA) $(SRC_PATH)/sysconfigs/target/target-x86_64.conf "$(DESTDIR)$(qemu_confdir)"

install: all $(if $(BUILD_DOCS),install-doc) install-sysconfig \
install-datadir install-localstatedir
	$(INSTALL_DIR) "$(DESTDIR)$(bindir)"
ifneq ($(TOOLS),)
	$(INSTALL_PROG) $(TOOLS) "$(DESTDIR)$(bindir)"
ifneq ($(STRIP),)
	$(STRIP) $(TOOLS:%="$(DESTDIR)$(bindir)/%")
endif
endif
ifneq ($(CONFIG_MODULES),)
	$(INSTALL_DIR) "$(DESTDIR)$(qemu_moddir)"
	for s in $(modules-m:.mo=$(DSOSUF)); do \
		t="$(DESTDIR)$(qemu_moddir)/$$(echo $$s | tr / -)"; \
		$(INSTALL_LIB) $$s "$$t"; \
		test -z "$(STRIP)" || $(STRIP) "$$t"; \
	done
endif
ifneq ($(HELPERS-y),)
	$(INSTALL_DIR) "$(DESTDIR)$(libexecdir)"
	$(INSTALL_PROG) $(HELPERS-y) "$(DESTDIR)$(libexecdir)"
ifneq ($(STRIP),)
	$(STRIP) $(HELPERS-y:%="$(DESTDIR)$(libexecdir)/%")
endif
endif
ifneq ($(BLOBS),)
	set -e; for x in $(BLOBS); do \
		$(INSTALL_DATA) $(SRC_PATH)/pc-bios/$$x "$(DESTDIR)$(qemu_datadir)"; \
	done
endif
ifeq ($(CONFIG_GTK),y)
	$(MAKE) -C po $@
endif
	$(INSTALL_DIR) "$(DESTDIR)$(qemu_datadir)/keymaps"
	set -e; for x in $(KEYMAPS); do \
		$(INSTALL_DATA) $(SRC_PATH)/pc-bios/keymaps/$$x "$(DESTDIR)$(qemu_datadir)/keymaps"; \
	done
	for d in $(TARGET_DIRS); do \
	$(MAKE) $(SUBDIR_MAKEFLAGS) TARGET_DIR=$$d/ -C $$d $@ || exit 1 ; \
        done

# various test targets
test speed: all
	$(MAKE) -C tests/tcg $@

.PHONY: TAGS
TAGS:
	rm -f $@
	find "$(SRC_PATH)" -name '*.[hc]' -exec etags --append {} +

cscope:
	rm -f ./cscope.*
	find "$(SRC_PATH)" -name "*.[chsS]" -print | sed 's,^\./,,' > ./cscope.files
	cscope -b

# documentation
MAKEINFO=makeinfo
MAKEINFOFLAGS=--no-headers --no-split --number-sections
TEXIFLAG=$(if $(V),,--quiet)
%.dvi: %.texi
	$(call quiet-command,texi2dvi $(TEXIFLAG) -I . $<,"  GEN   $@")

%.html: %.texi
	$(call quiet-command,LC_ALL=C $(MAKEINFO) $(MAKEINFOFLAGS) --html $< -o $@, \
	"  GEN   $@")

%.info: %.texi
	$(call quiet-command,$(MAKEINFO) $< -o $@,"  GEN   $@")

%.pdf: %.texi
	$(call quiet-command,texi2pdf $(TEXIFLAG) -I . $<,"  GEN   $@")

qemu-options.texi: $(SRC_PATH)/qemu-options.hx
	$(call quiet-command,sh $(SRC_PATH)/scripts/hxtool -t < $< > $@,"  GEN   $@")

qemu-monitor.texi: $(SRC_PATH)/hmp-commands.hx
	$(call quiet-command,sh $(SRC_PATH)/scripts/hxtool -t < $< > $@,"  GEN   $@")

qmp-commands.txt: $(SRC_PATH)/qmp-commands.hx
	$(call quiet-command,sh $(SRC_PATH)/scripts/hxtool -q < $< > $@,"  GEN   $@")

qemu-img-cmds.texi: $(SRC_PATH)/qemu-img-cmds.hx
	$(call quiet-command,sh $(SRC_PATH)/scripts/hxtool -t < $< > $@,"  GEN   $@")

qemu.1: qemu-doc.texi qemu-options.texi qemu-monitor.texi
	$(call quiet-command, \
	  perl -Ww -- $(SRC_PATH)/scripts/texi2pod.pl $< qemu.pod && \
	  $(POD2MAN) --section=1 --center=" " --release=" " qemu.pod > $@, \
	  "  GEN   $@")

qemu-img.1: qemu-img.texi qemu-img-cmds.texi
	$(call quiet-command, \
	  perl -Ww -- $(SRC_PATH)/scripts/texi2pod.pl $< qemu-img.pod && \
	  $(POD2MAN) --section=1 --center=" " --release=" " qemu-img.pod > $@, \
	  "  GEN   $@")

fsdev/virtfs-proxy-helper.1: fsdev/virtfs-proxy-helper.texi
	$(call quiet-command, \
	  perl -Ww -- $(SRC_PATH)/scripts/texi2pod.pl $< fsdev/virtfs-proxy-helper.pod && \
	  $(POD2MAN) --section=1 --center=" " --release=" " fsdev/virtfs-proxy-helper.pod > $@, \
	  "  GEN   $@")

qemu-nbd.8: qemu-nbd.texi
	$(call quiet-command, \
	  perl -Ww -- $(SRC_PATH)/scripts/texi2pod.pl $< qemu-nbd.pod && \
	  $(POD2MAN) --section=8 --center=" " --release=" " qemu-nbd.pod > $@, \
	  "  GEN   $@")

dvi: qemu-doc.dvi qemu-tech.dvi
html: qemu-doc.html qemu-tech.html
info: qemu-doc.info qemu-tech.info
pdf: qemu-doc.pdf qemu-tech.pdf

qemu-doc.dvi qemu-doc.html qemu-doc.info qemu-doc.pdf: \
	qemu-img.texi qemu-nbd.texi qemu-options.texi \
	qemu-monitor.texi qemu-img-cmds.texi

ifdef CONFIG_WIN32

INSTALLER = qemu-setup-$(VERSION)$(EXESUF)

nsisflags = -V2 -NOCD

ifneq ($(wildcard $(SRC_PATH)/dll),)
ifeq ($(ARCH),x86_64)
# 64 bit executables
DLL_PATH = $(SRC_PATH)/dll/w64
nsisflags += -DW64
else
# 32 bit executables
DLL_PATH = $(SRC_PATH)/dll/w32
endif
endif

.PHONY: installer
installer: $(INSTALLER)

INSTDIR=/tmp/qemu-nsis

$(INSTALLER): $(SRC_PATH)/qemu.nsi
	make install prefix=${INSTDIR}
ifdef SIGNCODE
	(cd ${INSTDIR}; \
         for i in *.exe; do \
           $(SIGNCODE) $${i}; \
         done \
        )
endif # SIGNCODE
	(cd ${INSTDIR}; \
         for i in qemu-system-*.exe; do \
           arch=$${i%.exe}; \
           arch=$${arch#qemu-system-}; \
           echo Section \"$$arch\" Section_$$arch; \
           echo SetOutPath \"\$$INSTDIR\"; \
           echo File \"\$${BINDIR}\\$$i\"; \
           echo SectionEnd; \
         done \
        ) >${INSTDIR}/system-emulations.nsh
	makensis $(nsisflags) \
                $(if $(BUILD_DOCS),-DCONFIG_DOCUMENTATION="y") \
                $(if $(CONFIG_GTK),-DCONFIG_GTK="y") \
                -DBINDIR="${INSTDIR}" \
                $(if $(DLL_PATH),-DDLLDIR="$(DLL_PATH)") \
                -DSRCDIR="$(SRC_PATH)" \
                -DOUTFILE="$(INSTALLER)" \
                $(SRC_PATH)/qemu.nsi
	rm -r ${INSTDIR}
ifdef SIGNCODE
	$(SIGNCODE) $(INSTALLER)
endif # SIGNCODE
endif # CONFIG_WIN

# Add a dependency on the generated files, so that they are always
# rebuilt before other object files
ifneq ($(filter-out %clean,$(MAKECMDGOALS)),$(if $(MAKECMDGOALS),,fail))
Makefile: $(GENERATED_HEADERS)
endif

# Include automatically generated dependency files
# Dependencies in Makefile.objs files come from our recursive subdir rules
-include $(wildcard *.d tests/*.d)