| /* default linux values for the selectors */ |
| #define __USER_CS (0x23) |
| #define __USER_DS (0x2B) |
| |
| struct target_pt_regs { |
| long ebx; |
| long ecx; |
| long edx; |
| long esi; |
| long edi; |
| long ebp; |
| long eax; |
| int xds; |
| int xes; |
| long orig_eax; |
| long eip; |
| int xcs; |
| long eflags; |
| long esp; |
| int xss; |
| }; |
| |
| /* ioctls */ |
| |
| #define TARGET_LDT_ENTRIES 8192 |
| #define TARGET_LDT_ENTRY_SIZE 8 |
| |
| #define TARGET_GDT_ENTRIES 9 |
| #define TARGET_GDT_ENTRY_TLS_ENTRIES 3 |
| #define TARGET_GDT_ENTRY_TLS_MIN 6 |
| #define TARGET_GDT_ENTRY_TLS_MAX (TARGET_GDT_ENTRY_TLS_MIN + TARGET_GDT_ENTRY_TLS_ENTRIES - 1) |
| |
| struct target_modify_ldt_ldt_s { |
| unsigned int entry_number; |
| abi_ulong base_addr; |
| unsigned int limit; |
| unsigned int flags; |
| }; |
| |
| /* vm86 defines */ |
| |
| #define TARGET_BIOSSEG 0x0f000 |
| |
| #define TARGET_CPU_086 0 |
| #define TARGET_CPU_186 1 |
| #define TARGET_CPU_286 2 |
| #define TARGET_CPU_386 3 |
| #define TARGET_CPU_486 4 |
| #define TARGET_CPU_586 5 |
| |
| #define TARGET_VM86_SIGNAL 0 /* return due to signal */ |
| #define TARGET_VM86_UNKNOWN 1 /* unhandled GP fault - IO-instruction or similar */ |
| #define TARGET_VM86_INTx 2 /* int3/int x instruction (ARG = x) */ |
| #define TARGET_VM86_STI 3 /* sti/popf/iret instruction enabled virtual interrupts */ |
| |
| /* |
| * Additional return values when invoking new vm86() |
| */ |
| #define TARGET_VM86_PICRETURN 4 /* return due to pending PIC request */ |
| #define TARGET_VM86_TRAP 6 /* return due to DOS-debugger request */ |
| |
| /* |
| * function codes when invoking new vm86() |
| */ |
| #define TARGET_VM86_PLUS_INSTALL_CHECK 0 |
| #define TARGET_VM86_ENTER 1 |
| #define TARGET_VM86_ENTER_NO_BYPASS 2 |
| #define TARGET_VM86_REQUEST_IRQ 3 |
| #define TARGET_VM86_FREE_IRQ 4 |
| #define TARGET_VM86_GET_IRQ_BITS 5 |
| #define TARGET_VM86_GET_AND_RESET_IRQ 6 |
| |
| /* |
| * This is the stack-layout seen by the user space program when we have |
| * done a translation of "SAVE_ALL" from vm86 mode. The real kernel layout |
| * is 'kernel_vm86_regs' (see below). |
| */ |
| |
| struct target_vm86_regs { |
| /* |
| * normal regs, with special meaning for the segment descriptors.. |
| */ |
| abi_long ebx; |
| abi_long ecx; |
| abi_long edx; |
| abi_long esi; |
| abi_long edi; |
| abi_long ebp; |
| abi_long eax; |
| abi_long __null_ds; |
| abi_long __null_es; |
| abi_long __null_fs; |
| abi_long __null_gs; |
| abi_long orig_eax; |
| abi_long eip; |
| unsigned short cs, __csh; |
| abi_long eflags; |
| abi_long esp; |
| unsigned short ss, __ssh; |
| /* |
| * these are specific to v86 mode: |
| */ |
| unsigned short es, __esh; |
| unsigned short ds, __dsh; |
| unsigned short fs, __fsh; |
| unsigned short gs, __gsh; |
| }; |
| |
| struct target_revectored_struct { |
| abi_ulong __map[8]; /* 256 bits */ |
| }; |
| |
| struct target_vm86_struct { |
| struct target_vm86_regs regs; |
| abi_ulong flags; |
| abi_ulong screen_bitmap; |
| abi_ulong cpu_type; |
| struct target_revectored_struct int_revectored; |
| struct target_revectored_struct int21_revectored; |
| }; |
| |
| /* |
| * flags masks |
| */ |
| #define TARGET_VM86_SCREEN_BITMAP 0x0001 |
| |
| struct target_vm86plus_info_struct { |
| abi_ulong flags; |
| #define TARGET_force_return_for_pic (1 << 0) |
| #define TARGET_vm86dbg_active (1 << 1) /* for debugger */ |
| #define TARGET_vm86dbg_TFpendig (1 << 2) /* for debugger */ |
| #define TARGET_is_vm86pus (1 << 31) /* for vm86 internal use */ |
| unsigned char vm86dbg_intxxtab[32]; /* for debugger */ |
| }; |
| |
| struct target_vm86plus_struct { |
| struct target_vm86_regs regs; |
| abi_ulong flags; |
| abi_ulong screen_bitmap; |
| abi_ulong cpu_type; |
| struct target_revectored_struct int_revectored; |
| struct target_revectored_struct int21_revectored; |
| struct target_vm86plus_info_struct vm86plus; |
| }; |
| |
| #define UNAME_MACHINE "i686" |
| #define UNAME_MINIMUM_RELEASE "2.6.32" |
| |
| #define TARGET_CLONE_BACKWARDS |