|  | /* | 
|  | * Copyright (C) 2009-2010 Nippon Telegraph and Telephone Corporation. | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or | 
|  | * modify it under the terms of the GNU General Public License version | 
|  | * 2 as published by the Free Software Foundation. | 
|  | * | 
|  | * You should have received a copy of the GNU General Public License | 
|  | * along with this program. If not, see <http://www.gnu.org/licenses/>. | 
|  | * | 
|  | * Contributions after 2012-01-13 are licensed under the terms of the | 
|  | * GNU GPL, version 2 or (at your option) any later version. | 
|  | */ | 
|  |  | 
|  | #include "qemu-common.h" | 
|  | #include "qemu/uri.h" | 
|  | #include "qemu/error-report.h" | 
|  | #include "qemu/sockets.h" | 
|  | #include "block/block_int.h" | 
|  | #include "qemu/bitops.h" | 
|  |  | 
|  | #define SD_PROTO_VER 0x01 | 
|  |  | 
|  | #define SD_DEFAULT_ADDR "localhost" | 
|  | #define SD_DEFAULT_PORT 7000 | 
|  |  | 
|  | #define SD_OP_CREATE_AND_WRITE_OBJ  0x01 | 
|  | #define SD_OP_READ_OBJ       0x02 | 
|  | #define SD_OP_WRITE_OBJ      0x03 | 
|  | /* 0x04 is used internally by Sheepdog */ | 
|  |  | 
|  | #define SD_OP_NEW_VDI        0x11 | 
|  | #define SD_OP_LOCK_VDI       0x12 | 
|  | #define SD_OP_RELEASE_VDI    0x13 | 
|  | #define SD_OP_GET_VDI_INFO   0x14 | 
|  | #define SD_OP_READ_VDIS      0x15 | 
|  | #define SD_OP_FLUSH_VDI      0x16 | 
|  | #define SD_OP_DEL_VDI        0x17 | 
|  | #define SD_OP_GET_CLUSTER_DEFAULT   0x18 | 
|  |  | 
|  | #define SD_FLAG_CMD_WRITE    0x01 | 
|  | #define SD_FLAG_CMD_COW      0x02 | 
|  | #define SD_FLAG_CMD_CACHE    0x04 /* Writeback mode for cache */ | 
|  | #define SD_FLAG_CMD_DIRECT   0x08 /* Don't use cache */ | 
|  |  | 
|  | #define SD_RES_SUCCESS       0x00 /* Success */ | 
|  | #define SD_RES_UNKNOWN       0x01 /* Unknown error */ | 
|  | #define SD_RES_NO_OBJ        0x02 /* No object found */ | 
|  | #define SD_RES_EIO           0x03 /* I/O error */ | 
|  | #define SD_RES_VDI_EXIST     0x04 /* Vdi exists already */ | 
|  | #define SD_RES_INVALID_PARMS 0x05 /* Invalid parameters */ | 
|  | #define SD_RES_SYSTEM_ERROR  0x06 /* System error */ | 
|  | #define SD_RES_VDI_LOCKED    0x07 /* Vdi is locked */ | 
|  | #define SD_RES_NO_VDI        0x08 /* No vdi found */ | 
|  | #define SD_RES_NO_BASE_VDI   0x09 /* No base vdi found */ | 
|  | #define SD_RES_VDI_READ      0x0A /* Cannot read requested vdi */ | 
|  | #define SD_RES_VDI_WRITE     0x0B /* Cannot write requested vdi */ | 
|  | #define SD_RES_BASE_VDI_READ 0x0C /* Cannot read base vdi */ | 
|  | #define SD_RES_BASE_VDI_WRITE   0x0D /* Cannot write base vdi */ | 
|  | #define SD_RES_NO_TAG        0x0E /* Requested tag is not found */ | 
|  | #define SD_RES_STARTUP       0x0F /* Sheepdog is on starting up */ | 
|  | #define SD_RES_VDI_NOT_LOCKED   0x10 /* Vdi is not locked */ | 
|  | #define SD_RES_SHUTDOWN      0x11 /* Sheepdog is shutting down */ | 
|  | #define SD_RES_NO_MEM        0x12 /* Cannot allocate memory */ | 
|  | #define SD_RES_FULL_VDI      0x13 /* we already have the maximum vdis */ | 
|  | #define SD_RES_VER_MISMATCH  0x14 /* Protocol version mismatch */ | 
|  | #define SD_RES_NO_SPACE      0x15 /* Server has no room for new objects */ | 
|  | #define SD_RES_WAIT_FOR_FORMAT  0x16 /* Waiting for a format operation */ | 
|  | #define SD_RES_WAIT_FOR_JOIN    0x17 /* Waiting for other nodes joining */ | 
|  | #define SD_RES_JOIN_FAILED   0x18 /* Target node had failed to join sheepdog */ | 
|  | #define SD_RES_HALT          0x19 /* Sheepdog is stopped serving IO request */ | 
|  | #define SD_RES_READONLY      0x1A /* Object is read-only */ | 
|  |  | 
|  | /* | 
|  | * Object ID rules | 
|  | * | 
|  | *  0 - 19 (20 bits): data object space | 
|  | * 20 - 31 (12 bits): reserved data object space | 
|  | * 32 - 55 (24 bits): vdi object space | 
|  | * 56 - 59 ( 4 bits): reserved vdi object space | 
|  | * 60 - 63 ( 4 bits): object type identifier space | 
|  | */ | 
|  |  | 
|  | #define VDI_SPACE_SHIFT   32 | 
|  | #define VDI_BIT (UINT64_C(1) << 63) | 
|  | #define VMSTATE_BIT (UINT64_C(1) << 62) | 
|  | #define MAX_DATA_OBJS (UINT64_C(1) << 20) | 
|  | #define MAX_CHILDREN 1024 | 
|  | #define SD_MAX_VDI_LEN 256 | 
|  | #define SD_MAX_VDI_TAG_LEN 256 | 
|  | #define SD_NR_VDIS   (1U << 24) | 
|  | #define SD_DATA_OBJ_SIZE (UINT64_C(1) << 22) | 
|  | #define SD_MAX_VDI_SIZE (SD_DATA_OBJ_SIZE * MAX_DATA_OBJS) | 
|  | #define SD_DEFAULT_BLOCK_SIZE_SHIFT 22 | 
|  | /* | 
|  | * For erasure coding, we use at most SD_EC_MAX_STRIP for data strips and | 
|  | * (SD_EC_MAX_STRIP - 1) for parity strips | 
|  | * | 
|  | * SD_MAX_COPIES is sum of number of data strips and parity strips. | 
|  | */ | 
|  | #define SD_EC_MAX_STRIP 16 | 
|  | #define SD_MAX_COPIES (SD_EC_MAX_STRIP * 2 - 1) | 
|  |  | 
|  | #define SD_INODE_SIZE (sizeof(SheepdogInode)) | 
|  | #define CURRENT_VDI_ID 0 | 
|  |  | 
|  | #define LOCK_TYPE_NORMAL 0 | 
|  | #define LOCK_TYPE_SHARED 1      /* for iSCSI multipath */ | 
|  |  | 
|  | typedef struct SheepdogReq { | 
|  | uint8_t proto_ver; | 
|  | uint8_t opcode; | 
|  | uint16_t flags; | 
|  | uint32_t epoch; | 
|  | uint32_t id; | 
|  | uint32_t data_length; | 
|  | uint32_t opcode_specific[8]; | 
|  | } SheepdogReq; | 
|  |  | 
|  | typedef struct SheepdogRsp { | 
|  | uint8_t proto_ver; | 
|  | uint8_t opcode; | 
|  | uint16_t flags; | 
|  | uint32_t epoch; | 
|  | uint32_t id; | 
|  | uint32_t data_length; | 
|  | uint32_t result; | 
|  | uint32_t opcode_specific[7]; | 
|  | } SheepdogRsp; | 
|  |  | 
|  | typedef struct SheepdogObjReq { | 
|  | uint8_t proto_ver; | 
|  | uint8_t opcode; | 
|  | uint16_t flags; | 
|  | uint32_t epoch; | 
|  | uint32_t id; | 
|  | uint32_t data_length; | 
|  | uint64_t oid; | 
|  | uint64_t cow_oid; | 
|  | uint8_t copies; | 
|  | uint8_t copy_policy; | 
|  | uint8_t reserved[6]; | 
|  | uint64_t offset; | 
|  | } SheepdogObjReq; | 
|  |  | 
|  | typedef struct SheepdogObjRsp { | 
|  | uint8_t proto_ver; | 
|  | uint8_t opcode; | 
|  | uint16_t flags; | 
|  | uint32_t epoch; | 
|  | uint32_t id; | 
|  | uint32_t data_length; | 
|  | uint32_t result; | 
|  | uint8_t copies; | 
|  | uint8_t copy_policy; | 
|  | uint8_t reserved[2]; | 
|  | uint32_t pad[6]; | 
|  | } SheepdogObjRsp; | 
|  |  | 
|  | typedef struct SheepdogVdiReq { | 
|  | uint8_t proto_ver; | 
|  | uint8_t opcode; | 
|  | uint16_t flags; | 
|  | uint32_t epoch; | 
|  | uint32_t id; | 
|  | uint32_t data_length; | 
|  | uint64_t vdi_size; | 
|  | uint32_t base_vdi_id; | 
|  | uint8_t copies; | 
|  | uint8_t copy_policy; | 
|  | uint8_t store_policy; | 
|  | uint8_t block_size_shift; | 
|  | uint32_t snapid; | 
|  | uint32_t type; | 
|  | uint32_t pad[2]; | 
|  | } SheepdogVdiReq; | 
|  |  | 
|  | typedef struct SheepdogVdiRsp { | 
|  | uint8_t proto_ver; | 
|  | uint8_t opcode; | 
|  | uint16_t flags; | 
|  | uint32_t epoch; | 
|  | uint32_t id; | 
|  | uint32_t data_length; | 
|  | uint32_t result; | 
|  | uint32_t rsvd; | 
|  | uint32_t vdi_id; | 
|  | uint32_t pad[5]; | 
|  | } SheepdogVdiRsp; | 
|  |  | 
|  | typedef struct SheepdogClusterRsp { | 
|  | uint8_t proto_ver; | 
|  | uint8_t opcode; | 
|  | uint16_t flags; | 
|  | uint32_t epoch; | 
|  | uint32_t id; | 
|  | uint32_t data_length; | 
|  | uint32_t result; | 
|  | uint8_t nr_copies; | 
|  | uint8_t copy_policy; | 
|  | uint8_t block_size_shift; | 
|  | uint8_t __pad1; | 
|  | uint32_t __pad2[6]; | 
|  | } SheepdogClusterRsp; | 
|  |  | 
|  | typedef struct SheepdogInode { | 
|  | char name[SD_MAX_VDI_LEN]; | 
|  | char tag[SD_MAX_VDI_TAG_LEN]; | 
|  | uint64_t ctime; | 
|  | uint64_t snap_ctime; | 
|  | uint64_t vm_clock_nsec; | 
|  | uint64_t vdi_size; | 
|  | uint64_t vm_state_size; | 
|  | uint16_t copy_policy; | 
|  | uint8_t nr_copies; | 
|  | uint8_t block_size_shift; | 
|  | uint32_t snap_id; | 
|  | uint32_t vdi_id; | 
|  | uint32_t parent_vdi_id; | 
|  | uint32_t child_vdi_id[MAX_CHILDREN]; | 
|  | uint32_t data_vdi_id[MAX_DATA_OBJS]; | 
|  | } SheepdogInode; | 
|  |  | 
|  | #define SD_INODE_HEADER_SIZE offsetof(SheepdogInode, data_vdi_id) | 
|  |  | 
|  | /* | 
|  | * 64 bit FNV-1a non-zero initial basis | 
|  | */ | 
|  | #define FNV1A_64_INIT ((uint64_t)0xcbf29ce484222325ULL) | 
|  |  | 
|  | /* | 
|  | * 64 bit Fowler/Noll/Vo FNV-1a hash code | 
|  | */ | 
|  | static inline uint64_t fnv_64a_buf(void *buf, size_t len, uint64_t hval) | 
|  | { | 
|  | unsigned char *bp = buf; | 
|  | unsigned char *be = bp + len; | 
|  | while (bp < be) { | 
|  | hval ^= (uint64_t) *bp++; | 
|  | hval += (hval << 1) + (hval << 4) + (hval << 5) + | 
|  | (hval << 7) + (hval << 8) + (hval << 40); | 
|  | } | 
|  | return hval; | 
|  | } | 
|  |  | 
|  | static inline bool is_data_obj_writable(SheepdogInode *inode, unsigned int idx) | 
|  | { | 
|  | return inode->vdi_id == inode->data_vdi_id[idx]; | 
|  | } | 
|  |  | 
|  | static inline bool is_data_obj(uint64_t oid) | 
|  | { | 
|  | return !(VDI_BIT & oid); | 
|  | } | 
|  |  | 
|  | static inline uint64_t data_oid_to_idx(uint64_t oid) | 
|  | { | 
|  | return oid & (MAX_DATA_OBJS - 1); | 
|  | } | 
|  |  | 
|  | static inline uint32_t oid_to_vid(uint64_t oid) | 
|  | { | 
|  | return (oid & ~VDI_BIT) >> VDI_SPACE_SHIFT; | 
|  | } | 
|  |  | 
|  | static inline uint64_t vid_to_vdi_oid(uint32_t vid) | 
|  | { | 
|  | return VDI_BIT | ((uint64_t)vid << VDI_SPACE_SHIFT); | 
|  | } | 
|  |  | 
|  | static inline uint64_t vid_to_vmstate_oid(uint32_t vid, uint32_t idx) | 
|  | { | 
|  | return VMSTATE_BIT | ((uint64_t)vid << VDI_SPACE_SHIFT) | idx; | 
|  | } | 
|  |  | 
|  | static inline uint64_t vid_to_data_oid(uint32_t vid, uint32_t idx) | 
|  | { | 
|  | return ((uint64_t)vid << VDI_SPACE_SHIFT) | idx; | 
|  | } | 
|  |  | 
|  | static inline bool is_snapshot(struct SheepdogInode *inode) | 
|  | { | 
|  | return !!inode->snap_ctime; | 
|  | } | 
|  |  | 
|  | #undef DPRINTF | 
|  | #ifdef DEBUG_SDOG | 
|  | #define DPRINTF(fmt, args...)                                       \ | 
|  | do {                                                            \ | 
|  | fprintf(stdout, "%s %d: " fmt, __func__, __LINE__, ##args); \ | 
|  | } while (0) | 
|  | #else | 
|  | #define DPRINTF(fmt, args...) | 
|  | #endif | 
|  |  | 
|  | typedef struct SheepdogAIOCB SheepdogAIOCB; | 
|  |  | 
|  | typedef struct AIOReq { | 
|  | SheepdogAIOCB *aiocb; | 
|  | unsigned int iov_offset; | 
|  |  | 
|  | uint64_t oid; | 
|  | uint64_t base_oid; | 
|  | uint64_t offset; | 
|  | unsigned int data_len; | 
|  | uint8_t flags; | 
|  | uint32_t id; | 
|  | bool create; | 
|  |  | 
|  | QLIST_ENTRY(AIOReq) aio_siblings; | 
|  | } AIOReq; | 
|  |  | 
|  | enum AIOCBState { | 
|  | AIOCB_WRITE_UDATA, | 
|  | AIOCB_READ_UDATA, | 
|  | AIOCB_FLUSH_CACHE, | 
|  | AIOCB_DISCARD_OBJ, | 
|  | }; | 
|  |  | 
|  | #define AIOCBOverlapping(x, y)                                 \ | 
|  | (!(x->max_affect_data_idx < y->min_affect_data_idx          \ | 
|  | || y->max_affect_data_idx < x->min_affect_data_idx)) | 
|  |  | 
|  | struct SheepdogAIOCB { | 
|  | BlockAIOCB common; | 
|  |  | 
|  | QEMUIOVector *qiov; | 
|  |  | 
|  | int64_t sector_num; | 
|  | int nb_sectors; | 
|  |  | 
|  | int ret; | 
|  | enum AIOCBState aiocb_type; | 
|  |  | 
|  | Coroutine *coroutine; | 
|  | void (*aio_done_func)(SheepdogAIOCB *); | 
|  |  | 
|  | bool cancelable; | 
|  | int nr_pending; | 
|  |  | 
|  | uint32_t min_affect_data_idx; | 
|  | uint32_t max_affect_data_idx; | 
|  |  | 
|  | /* | 
|  | * The difference between affect_data_idx and dirty_data_idx: | 
|  | * affect_data_idx represents range of index of all request types. | 
|  | * dirty_data_idx represents range of index updated by COW requests. | 
|  | * dirty_data_idx is used for updating an inode object. | 
|  | */ | 
|  | uint32_t min_dirty_data_idx; | 
|  | uint32_t max_dirty_data_idx; | 
|  |  | 
|  | QLIST_ENTRY(SheepdogAIOCB) aiocb_siblings; | 
|  | }; | 
|  |  | 
|  | typedef struct BDRVSheepdogState { | 
|  | BlockDriverState *bs; | 
|  | AioContext *aio_context; | 
|  |  | 
|  | SheepdogInode inode; | 
|  |  | 
|  | char name[SD_MAX_VDI_LEN]; | 
|  | bool is_snapshot; | 
|  | uint32_t cache_flags; | 
|  | bool discard_supported; | 
|  |  | 
|  | char *host_spec; | 
|  | bool is_unix; | 
|  | int fd; | 
|  |  | 
|  | CoMutex lock; | 
|  | Coroutine *co_send; | 
|  | Coroutine *co_recv; | 
|  |  | 
|  | uint32_t aioreq_seq_num; | 
|  |  | 
|  | /* Every aio request must be linked to either of these queues. */ | 
|  | QLIST_HEAD(inflight_aio_head, AIOReq) inflight_aio_head; | 
|  | QLIST_HEAD(failed_aio_head, AIOReq) failed_aio_head; | 
|  |  | 
|  | CoQueue overlapping_queue; | 
|  | QLIST_HEAD(inflight_aiocb_head, SheepdogAIOCB) inflight_aiocb_head; | 
|  | } BDRVSheepdogState; | 
|  |  | 
|  | typedef struct BDRVSheepdogReopenState { | 
|  | int fd; | 
|  | int cache_flags; | 
|  | } BDRVSheepdogReopenState; | 
|  |  | 
|  | static const char * sd_strerror(int err) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | static const struct { | 
|  | int err; | 
|  | const char *desc; | 
|  | } errors[] = { | 
|  | {SD_RES_SUCCESS, "Success"}, | 
|  | {SD_RES_UNKNOWN, "Unknown error"}, | 
|  | {SD_RES_NO_OBJ, "No object found"}, | 
|  | {SD_RES_EIO, "I/O error"}, | 
|  | {SD_RES_VDI_EXIST, "VDI exists already"}, | 
|  | {SD_RES_INVALID_PARMS, "Invalid parameters"}, | 
|  | {SD_RES_SYSTEM_ERROR, "System error"}, | 
|  | {SD_RES_VDI_LOCKED, "VDI is already locked"}, | 
|  | {SD_RES_NO_VDI, "No vdi found"}, | 
|  | {SD_RES_NO_BASE_VDI, "No base VDI found"}, | 
|  | {SD_RES_VDI_READ, "Failed read the requested VDI"}, | 
|  | {SD_RES_VDI_WRITE, "Failed to write the requested VDI"}, | 
|  | {SD_RES_BASE_VDI_READ, "Failed to read the base VDI"}, | 
|  | {SD_RES_BASE_VDI_WRITE, "Failed to write the base VDI"}, | 
|  | {SD_RES_NO_TAG, "Failed to find the requested tag"}, | 
|  | {SD_RES_STARTUP, "The system is still booting"}, | 
|  | {SD_RES_VDI_NOT_LOCKED, "VDI isn't locked"}, | 
|  | {SD_RES_SHUTDOWN, "The system is shutting down"}, | 
|  | {SD_RES_NO_MEM, "Out of memory on the server"}, | 
|  | {SD_RES_FULL_VDI, "We already have the maximum vdis"}, | 
|  | {SD_RES_VER_MISMATCH, "Protocol version mismatch"}, | 
|  | {SD_RES_NO_SPACE, "Server has no space for new objects"}, | 
|  | {SD_RES_WAIT_FOR_FORMAT, "Sheepdog is waiting for a format operation"}, | 
|  | {SD_RES_WAIT_FOR_JOIN, "Sheepdog is waiting for other nodes joining"}, | 
|  | {SD_RES_JOIN_FAILED, "Target node had failed to join sheepdog"}, | 
|  | {SD_RES_HALT, "Sheepdog is stopped serving IO request"}, | 
|  | {SD_RES_READONLY, "Object is read-only"}, | 
|  | }; | 
|  |  | 
|  | for (i = 0; i < ARRAY_SIZE(errors); ++i) { | 
|  | if (errors[i].err == err) { | 
|  | return errors[i].desc; | 
|  | } | 
|  | } | 
|  |  | 
|  | return "Invalid error code"; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Sheepdog I/O handling: | 
|  | * | 
|  | * 1. In sd_co_rw_vector, we send the I/O requests to the server and | 
|  | *    link the requests to the inflight_list in the | 
|  | *    BDRVSheepdogState.  The function exits without waiting for | 
|  | *    receiving the response. | 
|  | * | 
|  | * 2. We receive the response in aio_read_response, the fd handler to | 
|  | *    the sheepdog connection.  If metadata update is needed, we send | 
|  | *    the write request to the vdi object in sd_write_done, the write | 
|  | *    completion function.  We switch back to sd_co_readv/writev after | 
|  | *    all the requests belonging to the AIOCB are finished. | 
|  | */ | 
|  |  | 
|  | static inline AIOReq *alloc_aio_req(BDRVSheepdogState *s, SheepdogAIOCB *acb, | 
|  | uint64_t oid, unsigned int data_len, | 
|  | uint64_t offset, uint8_t flags, bool create, | 
|  | uint64_t base_oid, unsigned int iov_offset) | 
|  | { | 
|  | AIOReq *aio_req; | 
|  |  | 
|  | aio_req = g_malloc(sizeof(*aio_req)); | 
|  | aio_req->aiocb = acb; | 
|  | aio_req->iov_offset = iov_offset; | 
|  | aio_req->oid = oid; | 
|  | aio_req->base_oid = base_oid; | 
|  | aio_req->offset = offset; | 
|  | aio_req->data_len = data_len; | 
|  | aio_req->flags = flags; | 
|  | aio_req->id = s->aioreq_seq_num++; | 
|  | aio_req->create = create; | 
|  |  | 
|  | acb->nr_pending++; | 
|  | return aio_req; | 
|  | } | 
|  |  | 
|  | static inline void free_aio_req(BDRVSheepdogState *s, AIOReq *aio_req) | 
|  | { | 
|  | SheepdogAIOCB *acb = aio_req->aiocb; | 
|  |  | 
|  | acb->cancelable = false; | 
|  | QLIST_REMOVE(aio_req, aio_siblings); | 
|  | g_free(aio_req); | 
|  |  | 
|  | acb->nr_pending--; | 
|  | } | 
|  |  | 
|  | static void coroutine_fn sd_finish_aiocb(SheepdogAIOCB *acb) | 
|  | { | 
|  | qemu_coroutine_enter(acb->coroutine, NULL); | 
|  | qemu_aio_unref(acb); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Check whether the specified acb can be canceled | 
|  | * | 
|  | * We can cancel aio when any request belonging to the acb is: | 
|  | *  - Not processed by the sheepdog server. | 
|  | *  - Not linked to the inflight queue. | 
|  | */ | 
|  | static bool sd_acb_cancelable(const SheepdogAIOCB *acb) | 
|  | { | 
|  | BDRVSheepdogState *s = acb->common.bs->opaque; | 
|  | AIOReq *aioreq; | 
|  |  | 
|  | if (!acb->cancelable) { | 
|  | return false; | 
|  | } | 
|  |  | 
|  | QLIST_FOREACH(aioreq, &s->inflight_aio_head, aio_siblings) { | 
|  | if (aioreq->aiocb == acb) { | 
|  | return false; | 
|  | } | 
|  | } | 
|  |  | 
|  | return true; | 
|  | } | 
|  |  | 
|  | static void sd_aio_cancel(BlockAIOCB *blockacb) | 
|  | { | 
|  | SheepdogAIOCB *acb = (SheepdogAIOCB *)blockacb; | 
|  | BDRVSheepdogState *s = acb->common.bs->opaque; | 
|  | AIOReq *aioreq, *next; | 
|  |  | 
|  | if (sd_acb_cancelable(acb)) { | 
|  | /* Remove outstanding requests from failed queue.  */ | 
|  | QLIST_FOREACH_SAFE(aioreq, &s->failed_aio_head, aio_siblings, | 
|  | next) { | 
|  | if (aioreq->aiocb == acb) { | 
|  | free_aio_req(s, aioreq); | 
|  | } | 
|  | } | 
|  |  | 
|  | assert(acb->nr_pending == 0); | 
|  | if (acb->common.cb) { | 
|  | acb->common.cb(acb->common.opaque, -ECANCELED); | 
|  | } | 
|  | sd_finish_aiocb(acb); | 
|  | } | 
|  | } | 
|  |  | 
|  | static const AIOCBInfo sd_aiocb_info = { | 
|  | .aiocb_size     = sizeof(SheepdogAIOCB), | 
|  | .cancel_async   = sd_aio_cancel, | 
|  | }; | 
|  |  | 
|  | static SheepdogAIOCB *sd_aio_setup(BlockDriverState *bs, QEMUIOVector *qiov, | 
|  | int64_t sector_num, int nb_sectors) | 
|  | { | 
|  | SheepdogAIOCB *acb; | 
|  | uint32_t object_size; | 
|  | BDRVSheepdogState *s = bs->opaque; | 
|  |  | 
|  | object_size = (UINT32_C(1) << s->inode.block_size_shift); | 
|  |  | 
|  | acb = qemu_aio_get(&sd_aiocb_info, bs, NULL, NULL); | 
|  |  | 
|  | acb->qiov = qiov; | 
|  |  | 
|  | acb->sector_num = sector_num; | 
|  | acb->nb_sectors = nb_sectors; | 
|  |  | 
|  | acb->aio_done_func = NULL; | 
|  | acb->cancelable = true; | 
|  | acb->coroutine = qemu_coroutine_self(); | 
|  | acb->ret = 0; | 
|  | acb->nr_pending = 0; | 
|  |  | 
|  | acb->min_affect_data_idx = acb->sector_num * BDRV_SECTOR_SIZE / object_size; | 
|  | acb->max_affect_data_idx = (acb->sector_num * BDRV_SECTOR_SIZE + | 
|  | acb->nb_sectors * BDRV_SECTOR_SIZE) / object_size; | 
|  |  | 
|  | acb->min_dirty_data_idx = UINT32_MAX; | 
|  | acb->max_dirty_data_idx = 0; | 
|  |  | 
|  | return acb; | 
|  | } | 
|  |  | 
|  | /* Return -EIO in case of error, file descriptor on success */ | 
|  | static int connect_to_sdog(BDRVSheepdogState *s, Error **errp) | 
|  | { | 
|  | int fd; | 
|  |  | 
|  | if (s->is_unix) { | 
|  | fd = unix_connect(s->host_spec, errp); | 
|  | } else { | 
|  | fd = inet_connect(s->host_spec, errp); | 
|  |  | 
|  | if (fd >= 0) { | 
|  | int ret = socket_set_nodelay(fd); | 
|  | if (ret < 0) { | 
|  | error_report("%s", strerror(errno)); | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | if (fd >= 0) { | 
|  | qemu_set_nonblock(fd); | 
|  | } else { | 
|  | fd = -EIO; | 
|  | } | 
|  |  | 
|  | return fd; | 
|  | } | 
|  |  | 
|  | /* Return 0 on success and -errno in case of error */ | 
|  | static coroutine_fn int send_co_req(int sockfd, SheepdogReq *hdr, void *data, | 
|  | unsigned int *wlen) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  | ret = qemu_co_send(sockfd, hdr, sizeof(*hdr)); | 
|  | if (ret != sizeof(*hdr)) { | 
|  | error_report("failed to send a req, %s", strerror(errno)); | 
|  | ret = -socket_error(); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | ret = qemu_co_send(sockfd, data, *wlen); | 
|  | if (ret != *wlen) { | 
|  | ret = -socket_error(); | 
|  | error_report("failed to send a req, %s", strerror(errno)); | 
|  | } | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static void restart_co_req(void *opaque) | 
|  | { | 
|  | Coroutine *co = opaque; | 
|  |  | 
|  | qemu_coroutine_enter(co, NULL); | 
|  | } | 
|  |  | 
|  | typedef struct SheepdogReqCo { | 
|  | int sockfd; | 
|  | AioContext *aio_context; | 
|  | SheepdogReq *hdr; | 
|  | void *data; | 
|  | unsigned int *wlen; | 
|  | unsigned int *rlen; | 
|  | int ret; | 
|  | bool finished; | 
|  | } SheepdogReqCo; | 
|  |  | 
|  | static coroutine_fn void do_co_req(void *opaque) | 
|  | { | 
|  | int ret; | 
|  | Coroutine *co; | 
|  | SheepdogReqCo *srco = opaque; | 
|  | int sockfd = srco->sockfd; | 
|  | SheepdogReq *hdr = srco->hdr; | 
|  | void *data = srco->data; | 
|  | unsigned int *wlen = srco->wlen; | 
|  | unsigned int *rlen = srco->rlen; | 
|  |  | 
|  | co = qemu_coroutine_self(); | 
|  | aio_set_fd_handler(srco->aio_context, sockfd, false, | 
|  | NULL, restart_co_req, co); | 
|  |  | 
|  | ret = send_co_req(sockfd, hdr, data, wlen); | 
|  | if (ret < 0) { | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | aio_set_fd_handler(srco->aio_context, sockfd, false, | 
|  | restart_co_req, NULL, co); | 
|  |  | 
|  | ret = qemu_co_recv(sockfd, hdr, sizeof(*hdr)); | 
|  | if (ret != sizeof(*hdr)) { | 
|  | error_report("failed to get a rsp, %s", strerror(errno)); | 
|  | ret = -errno; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | if (*rlen > hdr->data_length) { | 
|  | *rlen = hdr->data_length; | 
|  | } | 
|  |  | 
|  | if (*rlen) { | 
|  | ret = qemu_co_recv(sockfd, data, *rlen); | 
|  | if (ret != *rlen) { | 
|  | error_report("failed to get the data, %s", strerror(errno)); | 
|  | ret = -errno; | 
|  | goto out; | 
|  | } | 
|  | } | 
|  | ret = 0; | 
|  | out: | 
|  | /* there is at most one request for this sockfd, so it is safe to | 
|  | * set each handler to NULL. */ | 
|  | aio_set_fd_handler(srco->aio_context, sockfd, false, | 
|  | NULL, NULL, NULL); | 
|  |  | 
|  | srco->ret = ret; | 
|  | srco->finished = true; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Send the request to the sheep in a synchronous manner. | 
|  | * | 
|  | * Return 0 on success, -errno in case of error. | 
|  | */ | 
|  | static int do_req(int sockfd, AioContext *aio_context, SheepdogReq *hdr, | 
|  | void *data, unsigned int *wlen, unsigned int *rlen) | 
|  | { | 
|  | Coroutine *co; | 
|  | SheepdogReqCo srco = { | 
|  | .sockfd = sockfd, | 
|  | .aio_context = aio_context, | 
|  | .hdr = hdr, | 
|  | .data = data, | 
|  | .wlen = wlen, | 
|  | .rlen = rlen, | 
|  | .ret = 0, | 
|  | .finished = false, | 
|  | }; | 
|  |  | 
|  | if (qemu_in_coroutine()) { | 
|  | do_co_req(&srco); | 
|  | } else { | 
|  | co = qemu_coroutine_create(do_co_req); | 
|  | qemu_coroutine_enter(co, &srco); | 
|  | while (!srco.finished) { | 
|  | aio_poll(aio_context, true); | 
|  | } | 
|  | } | 
|  |  | 
|  | return srco.ret; | 
|  | } | 
|  |  | 
|  | static void coroutine_fn add_aio_request(BDRVSheepdogState *s, AIOReq *aio_req, | 
|  | struct iovec *iov, int niov, | 
|  | enum AIOCBState aiocb_type); | 
|  | static void coroutine_fn resend_aioreq(BDRVSheepdogState *s, AIOReq *aio_req); | 
|  | static int reload_inode(BDRVSheepdogState *s, uint32_t snapid, const char *tag); | 
|  | static int get_sheep_fd(BDRVSheepdogState *s, Error **errp); | 
|  | static void co_write_request(void *opaque); | 
|  |  | 
|  | static coroutine_fn void reconnect_to_sdog(void *opaque) | 
|  | { | 
|  | BDRVSheepdogState *s = opaque; | 
|  | AIOReq *aio_req, *next; | 
|  |  | 
|  | aio_set_fd_handler(s->aio_context, s->fd, false, NULL, | 
|  | NULL, NULL); | 
|  | close(s->fd); | 
|  | s->fd = -1; | 
|  |  | 
|  | /* Wait for outstanding write requests to be completed. */ | 
|  | while (s->co_send != NULL) { | 
|  | co_write_request(opaque); | 
|  | } | 
|  |  | 
|  | /* Try to reconnect the sheepdog server every one second. */ | 
|  | while (s->fd < 0) { | 
|  | Error *local_err = NULL; | 
|  | s->fd = get_sheep_fd(s, &local_err); | 
|  | if (s->fd < 0) { | 
|  | DPRINTF("Wait for connection to be established\n"); | 
|  | error_report_err(local_err); | 
|  | co_aio_sleep_ns(bdrv_get_aio_context(s->bs), QEMU_CLOCK_REALTIME, | 
|  | 1000000000ULL); | 
|  | } | 
|  | }; | 
|  |  | 
|  | /* | 
|  | * Now we have to resend all the request in the inflight queue.  However, | 
|  | * resend_aioreq() can yield and newly created requests can be added to the | 
|  | * inflight queue before the coroutine is resumed.  To avoid mixing them, we | 
|  | * have to move all the inflight requests to the failed queue before | 
|  | * resend_aioreq() is called. | 
|  | */ | 
|  | QLIST_FOREACH_SAFE(aio_req, &s->inflight_aio_head, aio_siblings, next) { | 
|  | QLIST_REMOVE(aio_req, aio_siblings); | 
|  | QLIST_INSERT_HEAD(&s->failed_aio_head, aio_req, aio_siblings); | 
|  | } | 
|  |  | 
|  | /* Resend all the failed aio requests. */ | 
|  | while (!QLIST_EMPTY(&s->failed_aio_head)) { | 
|  | aio_req = QLIST_FIRST(&s->failed_aio_head); | 
|  | QLIST_REMOVE(aio_req, aio_siblings); | 
|  | QLIST_INSERT_HEAD(&s->inflight_aio_head, aio_req, aio_siblings); | 
|  | resend_aioreq(s, aio_req); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Receive responses of the I/O requests. | 
|  | * | 
|  | * This function is registered as a fd handler, and called from the | 
|  | * main loop when s->fd is ready for reading responses. | 
|  | */ | 
|  | static void coroutine_fn aio_read_response(void *opaque) | 
|  | { | 
|  | SheepdogObjRsp rsp; | 
|  | BDRVSheepdogState *s = opaque; | 
|  | int fd = s->fd; | 
|  | int ret; | 
|  | AIOReq *aio_req = NULL; | 
|  | SheepdogAIOCB *acb; | 
|  | uint64_t idx; | 
|  |  | 
|  | /* read a header */ | 
|  | ret = qemu_co_recv(fd, &rsp, sizeof(rsp)); | 
|  | if (ret != sizeof(rsp)) { | 
|  | error_report("failed to get the header, %s", strerror(errno)); | 
|  | goto err; | 
|  | } | 
|  |  | 
|  | /* find the right aio_req from the inflight aio list */ | 
|  | QLIST_FOREACH(aio_req, &s->inflight_aio_head, aio_siblings) { | 
|  | if (aio_req->id == rsp.id) { | 
|  | break; | 
|  | } | 
|  | } | 
|  | if (!aio_req) { | 
|  | error_report("cannot find aio_req %x", rsp.id); | 
|  | goto err; | 
|  | } | 
|  |  | 
|  | acb = aio_req->aiocb; | 
|  |  | 
|  | switch (acb->aiocb_type) { | 
|  | case AIOCB_WRITE_UDATA: | 
|  | /* this coroutine context is no longer suitable for co_recv | 
|  | * because we may send data to update vdi objects */ | 
|  | s->co_recv = NULL; | 
|  | if (!is_data_obj(aio_req->oid)) { | 
|  | break; | 
|  | } | 
|  | idx = data_oid_to_idx(aio_req->oid); | 
|  |  | 
|  | if (aio_req->create) { | 
|  | /* | 
|  | * If the object is newly created one, we need to update | 
|  | * the vdi object (metadata object).  min_dirty_data_idx | 
|  | * and max_dirty_data_idx are changed to include updated | 
|  | * index between them. | 
|  | */ | 
|  | if (rsp.result == SD_RES_SUCCESS) { | 
|  | s->inode.data_vdi_id[idx] = s->inode.vdi_id; | 
|  | acb->max_dirty_data_idx = MAX(idx, acb->max_dirty_data_idx); | 
|  | acb->min_dirty_data_idx = MIN(idx, acb->min_dirty_data_idx); | 
|  | } | 
|  | } | 
|  | break; | 
|  | case AIOCB_READ_UDATA: | 
|  | ret = qemu_co_recvv(fd, acb->qiov->iov, acb->qiov->niov, | 
|  | aio_req->iov_offset, rsp.data_length); | 
|  | if (ret != rsp.data_length) { | 
|  | error_report("failed to get the data, %s", strerror(errno)); | 
|  | goto err; | 
|  | } | 
|  | break; | 
|  | case AIOCB_FLUSH_CACHE: | 
|  | if (rsp.result == SD_RES_INVALID_PARMS) { | 
|  | DPRINTF("disable cache since the server doesn't support it\n"); | 
|  | s->cache_flags = SD_FLAG_CMD_DIRECT; | 
|  | rsp.result = SD_RES_SUCCESS; | 
|  | } | 
|  | break; | 
|  | case AIOCB_DISCARD_OBJ: | 
|  | switch (rsp.result) { | 
|  | case SD_RES_INVALID_PARMS: | 
|  | error_report("sheep(%s) doesn't support discard command", | 
|  | s->host_spec); | 
|  | rsp.result = SD_RES_SUCCESS; | 
|  | s->discard_supported = false; | 
|  | break; | 
|  | default: | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | switch (rsp.result) { | 
|  | case SD_RES_SUCCESS: | 
|  | break; | 
|  | case SD_RES_READONLY: | 
|  | if (s->inode.vdi_id == oid_to_vid(aio_req->oid)) { | 
|  | ret = reload_inode(s, 0, ""); | 
|  | if (ret < 0) { | 
|  | goto err; | 
|  | } | 
|  | } | 
|  | if (is_data_obj(aio_req->oid)) { | 
|  | aio_req->oid = vid_to_data_oid(s->inode.vdi_id, | 
|  | data_oid_to_idx(aio_req->oid)); | 
|  | } else { | 
|  | aio_req->oid = vid_to_vdi_oid(s->inode.vdi_id); | 
|  | } | 
|  | resend_aioreq(s, aio_req); | 
|  | goto out; | 
|  | default: | 
|  | acb->ret = -EIO; | 
|  | error_report("%s", sd_strerror(rsp.result)); | 
|  | break; | 
|  | } | 
|  |  | 
|  | free_aio_req(s, aio_req); | 
|  | if (!acb->nr_pending) { | 
|  | /* | 
|  | * We've finished all requests which belong to the AIOCB, so | 
|  | * we can switch back to sd_co_readv/writev now. | 
|  | */ | 
|  | acb->aio_done_func(acb); | 
|  | } | 
|  | out: | 
|  | s->co_recv = NULL; | 
|  | return; | 
|  | err: | 
|  | s->co_recv = NULL; | 
|  | reconnect_to_sdog(opaque); | 
|  | } | 
|  |  | 
|  | static void co_read_response(void *opaque) | 
|  | { | 
|  | BDRVSheepdogState *s = opaque; | 
|  |  | 
|  | if (!s->co_recv) { | 
|  | s->co_recv = qemu_coroutine_create(aio_read_response); | 
|  | } | 
|  |  | 
|  | qemu_coroutine_enter(s->co_recv, opaque); | 
|  | } | 
|  |  | 
|  | static void co_write_request(void *opaque) | 
|  | { | 
|  | BDRVSheepdogState *s = opaque; | 
|  |  | 
|  | qemu_coroutine_enter(s->co_send, NULL); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Return a socket descriptor to read/write objects. | 
|  | * | 
|  | * We cannot use this descriptor for other operations because | 
|  | * the block driver may be on waiting response from the server. | 
|  | */ | 
|  | static int get_sheep_fd(BDRVSheepdogState *s, Error **errp) | 
|  | { | 
|  | int fd; | 
|  |  | 
|  | fd = connect_to_sdog(s, errp); | 
|  | if (fd < 0) { | 
|  | return fd; | 
|  | } | 
|  |  | 
|  | aio_set_fd_handler(s->aio_context, fd, false, | 
|  | co_read_response, NULL, s); | 
|  | return fd; | 
|  | } | 
|  |  | 
|  | static int sd_parse_uri(BDRVSheepdogState *s, const char *filename, | 
|  | char *vdi, uint32_t *snapid, char *tag) | 
|  | { | 
|  | URI *uri; | 
|  | QueryParams *qp = NULL; | 
|  | int ret = 0; | 
|  |  | 
|  | uri = uri_parse(filename); | 
|  | if (!uri) { | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | /* transport */ | 
|  | if (!strcmp(uri->scheme, "sheepdog")) { | 
|  | s->is_unix = false; | 
|  | } else if (!strcmp(uri->scheme, "sheepdog+tcp")) { | 
|  | s->is_unix = false; | 
|  | } else if (!strcmp(uri->scheme, "sheepdog+unix")) { | 
|  | s->is_unix = true; | 
|  | } else { | 
|  | ret = -EINVAL; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | if (uri->path == NULL || !strcmp(uri->path, "/")) { | 
|  | ret = -EINVAL; | 
|  | goto out; | 
|  | } | 
|  | pstrcpy(vdi, SD_MAX_VDI_LEN, uri->path + 1); | 
|  |  | 
|  | qp = query_params_parse(uri->query); | 
|  | if (qp->n > 1 || (s->is_unix && !qp->n) || (!s->is_unix && qp->n)) { | 
|  | ret = -EINVAL; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | if (s->is_unix) { | 
|  | /* sheepdog+unix:///vdiname?socket=path */ | 
|  | if (uri->server || uri->port || strcmp(qp->p[0].name, "socket")) { | 
|  | ret = -EINVAL; | 
|  | goto out; | 
|  | } | 
|  | s->host_spec = g_strdup(qp->p[0].value); | 
|  | } else { | 
|  | /* sheepdog[+tcp]://[host:port]/vdiname */ | 
|  | s->host_spec = g_strdup_printf("%s:%d", uri->server ?: SD_DEFAULT_ADDR, | 
|  | uri->port ?: SD_DEFAULT_PORT); | 
|  | } | 
|  |  | 
|  | /* snapshot tag */ | 
|  | if (uri->fragment) { | 
|  | *snapid = strtoul(uri->fragment, NULL, 10); | 
|  | if (*snapid == 0) { | 
|  | pstrcpy(tag, SD_MAX_VDI_TAG_LEN, uri->fragment); | 
|  | } | 
|  | } else { | 
|  | *snapid = CURRENT_VDI_ID; /* search current vdi */ | 
|  | } | 
|  |  | 
|  | out: | 
|  | if (qp) { | 
|  | query_params_free(qp); | 
|  | } | 
|  | uri_free(uri); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Parse a filename (old syntax) | 
|  | * | 
|  | * filename must be one of the following formats: | 
|  | *   1. [vdiname] | 
|  | *   2. [vdiname]:[snapid] | 
|  | *   3. [vdiname]:[tag] | 
|  | *   4. [hostname]:[port]:[vdiname] | 
|  | *   5. [hostname]:[port]:[vdiname]:[snapid] | 
|  | *   6. [hostname]:[port]:[vdiname]:[tag] | 
|  | * | 
|  | * You can boot from the snapshot images by specifying `snapid` or | 
|  | * `tag'. | 
|  | * | 
|  | * You can run VMs outside the Sheepdog cluster by specifying | 
|  | * `hostname' and `port' (experimental). | 
|  | */ | 
|  | static int parse_vdiname(BDRVSheepdogState *s, const char *filename, | 
|  | char *vdi, uint32_t *snapid, char *tag) | 
|  | { | 
|  | char *p, *q, *uri; | 
|  | const char *host_spec, *vdi_spec; | 
|  | int nr_sep, ret; | 
|  |  | 
|  | strstart(filename, "sheepdog:", (const char **)&filename); | 
|  | p = q = g_strdup(filename); | 
|  |  | 
|  | /* count the number of separators */ | 
|  | nr_sep = 0; | 
|  | while (*p) { | 
|  | if (*p == ':') { | 
|  | nr_sep++; | 
|  | } | 
|  | p++; | 
|  | } | 
|  | p = q; | 
|  |  | 
|  | /* use the first two tokens as host_spec. */ | 
|  | if (nr_sep >= 2) { | 
|  | host_spec = p; | 
|  | p = strchr(p, ':'); | 
|  | p++; | 
|  | p = strchr(p, ':'); | 
|  | *p++ = '\0'; | 
|  | } else { | 
|  | host_spec = ""; | 
|  | } | 
|  |  | 
|  | vdi_spec = p; | 
|  |  | 
|  | p = strchr(vdi_spec, ':'); | 
|  | if (p) { | 
|  | *p++ = '#'; | 
|  | } | 
|  |  | 
|  | uri = g_strdup_printf("sheepdog://%s/%s", host_spec, vdi_spec); | 
|  |  | 
|  | ret = sd_parse_uri(s, uri, vdi, snapid, tag); | 
|  |  | 
|  | g_free(q); | 
|  | g_free(uri); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int find_vdi_name(BDRVSheepdogState *s, const char *filename, | 
|  | uint32_t snapid, const char *tag, uint32_t *vid, | 
|  | bool lock, Error **errp) | 
|  | { | 
|  | int ret, fd; | 
|  | SheepdogVdiReq hdr; | 
|  | SheepdogVdiRsp *rsp = (SheepdogVdiRsp *)&hdr; | 
|  | unsigned int wlen, rlen = 0; | 
|  | char buf[SD_MAX_VDI_LEN + SD_MAX_VDI_TAG_LEN]; | 
|  |  | 
|  | fd = connect_to_sdog(s, errp); | 
|  | if (fd < 0) { | 
|  | return fd; | 
|  | } | 
|  |  | 
|  | /* This pair of strncpy calls ensures that the buffer is zero-filled, | 
|  | * which is desirable since we'll soon be sending those bytes, and | 
|  | * don't want the send_req to read uninitialized data. | 
|  | */ | 
|  | strncpy(buf, filename, SD_MAX_VDI_LEN); | 
|  | strncpy(buf + SD_MAX_VDI_LEN, tag, SD_MAX_VDI_TAG_LEN); | 
|  |  | 
|  | memset(&hdr, 0, sizeof(hdr)); | 
|  | if (lock) { | 
|  | hdr.opcode = SD_OP_LOCK_VDI; | 
|  | hdr.type = LOCK_TYPE_NORMAL; | 
|  | } else { | 
|  | hdr.opcode = SD_OP_GET_VDI_INFO; | 
|  | } | 
|  | wlen = SD_MAX_VDI_LEN + SD_MAX_VDI_TAG_LEN; | 
|  | hdr.proto_ver = SD_PROTO_VER; | 
|  | hdr.data_length = wlen; | 
|  | hdr.snapid = snapid; | 
|  | hdr.flags = SD_FLAG_CMD_WRITE; | 
|  |  | 
|  | ret = do_req(fd, s->aio_context, (SheepdogReq *)&hdr, buf, &wlen, &rlen); | 
|  | if (ret) { | 
|  | error_setg_errno(errp, -ret, "cannot get vdi info"); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | if (rsp->result != SD_RES_SUCCESS) { | 
|  | error_setg(errp, "cannot get vdi info, %s, %s %" PRIu32 " %s", | 
|  | sd_strerror(rsp->result), filename, snapid, tag); | 
|  | if (rsp->result == SD_RES_NO_VDI) { | 
|  | ret = -ENOENT; | 
|  | } else if (rsp->result == SD_RES_VDI_LOCKED) { | 
|  | ret = -EBUSY; | 
|  | } else { | 
|  | ret = -EIO; | 
|  | } | 
|  | goto out; | 
|  | } | 
|  | *vid = rsp->vdi_id; | 
|  |  | 
|  | ret = 0; | 
|  | out: | 
|  | closesocket(fd); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static void coroutine_fn add_aio_request(BDRVSheepdogState *s, AIOReq *aio_req, | 
|  | struct iovec *iov, int niov, | 
|  | enum AIOCBState aiocb_type) | 
|  | { | 
|  | int nr_copies = s->inode.nr_copies; | 
|  | SheepdogObjReq hdr; | 
|  | unsigned int wlen = 0; | 
|  | int ret; | 
|  | uint64_t oid = aio_req->oid; | 
|  | unsigned int datalen = aio_req->data_len; | 
|  | uint64_t offset = aio_req->offset; | 
|  | uint8_t flags = aio_req->flags; | 
|  | uint64_t old_oid = aio_req->base_oid; | 
|  | bool create = aio_req->create; | 
|  |  | 
|  | if (!nr_copies) { | 
|  | error_report("bug"); | 
|  | } | 
|  |  | 
|  | memset(&hdr, 0, sizeof(hdr)); | 
|  |  | 
|  | switch (aiocb_type) { | 
|  | case AIOCB_FLUSH_CACHE: | 
|  | hdr.opcode = SD_OP_FLUSH_VDI; | 
|  | break; | 
|  | case AIOCB_READ_UDATA: | 
|  | hdr.opcode = SD_OP_READ_OBJ; | 
|  | hdr.flags = flags; | 
|  | break; | 
|  | case AIOCB_WRITE_UDATA: | 
|  | if (create) { | 
|  | hdr.opcode = SD_OP_CREATE_AND_WRITE_OBJ; | 
|  | } else { | 
|  | hdr.opcode = SD_OP_WRITE_OBJ; | 
|  | } | 
|  | wlen = datalen; | 
|  | hdr.flags = SD_FLAG_CMD_WRITE | flags; | 
|  | break; | 
|  | case AIOCB_DISCARD_OBJ: | 
|  | hdr.opcode = SD_OP_WRITE_OBJ; | 
|  | hdr.flags = SD_FLAG_CMD_WRITE | flags; | 
|  | s->inode.data_vdi_id[data_oid_to_idx(oid)] = 0; | 
|  | offset = offsetof(SheepdogInode, | 
|  | data_vdi_id[data_oid_to_idx(oid)]); | 
|  | oid = vid_to_vdi_oid(s->inode.vdi_id); | 
|  | wlen = datalen = sizeof(uint32_t); | 
|  | break; | 
|  | } | 
|  |  | 
|  | if (s->cache_flags) { | 
|  | hdr.flags |= s->cache_flags; | 
|  | } | 
|  |  | 
|  | hdr.oid = oid; | 
|  | hdr.cow_oid = old_oid; | 
|  | hdr.copies = s->inode.nr_copies; | 
|  |  | 
|  | hdr.data_length = datalen; | 
|  | hdr.offset = offset; | 
|  |  | 
|  | hdr.id = aio_req->id; | 
|  |  | 
|  | qemu_co_mutex_lock(&s->lock); | 
|  | s->co_send = qemu_coroutine_self(); | 
|  | aio_set_fd_handler(s->aio_context, s->fd, false, | 
|  | co_read_response, co_write_request, s); | 
|  | socket_set_cork(s->fd, 1); | 
|  |  | 
|  | /* send a header */ | 
|  | ret = qemu_co_send(s->fd, &hdr, sizeof(hdr)); | 
|  | if (ret != sizeof(hdr)) { | 
|  | error_report("failed to send a req, %s", strerror(errno)); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | if (wlen) { | 
|  | ret = qemu_co_sendv(s->fd, iov, niov, aio_req->iov_offset, wlen); | 
|  | if (ret != wlen) { | 
|  | error_report("failed to send a data, %s", strerror(errno)); | 
|  | } | 
|  | } | 
|  | out: | 
|  | socket_set_cork(s->fd, 0); | 
|  | aio_set_fd_handler(s->aio_context, s->fd, false, | 
|  | co_read_response, NULL, s); | 
|  | s->co_send = NULL; | 
|  | qemu_co_mutex_unlock(&s->lock); | 
|  | } | 
|  |  | 
|  | static int read_write_object(int fd, AioContext *aio_context, char *buf, | 
|  | uint64_t oid, uint8_t copies, | 
|  | unsigned int datalen, uint64_t offset, | 
|  | bool write, bool create, uint32_t cache_flags) | 
|  | { | 
|  | SheepdogObjReq hdr; | 
|  | SheepdogObjRsp *rsp = (SheepdogObjRsp *)&hdr; | 
|  | unsigned int wlen, rlen; | 
|  | int ret; | 
|  |  | 
|  | memset(&hdr, 0, sizeof(hdr)); | 
|  |  | 
|  | if (write) { | 
|  | wlen = datalen; | 
|  | rlen = 0; | 
|  | hdr.flags = SD_FLAG_CMD_WRITE; | 
|  | if (create) { | 
|  | hdr.opcode = SD_OP_CREATE_AND_WRITE_OBJ; | 
|  | } else { | 
|  | hdr.opcode = SD_OP_WRITE_OBJ; | 
|  | } | 
|  | } else { | 
|  | wlen = 0; | 
|  | rlen = datalen; | 
|  | hdr.opcode = SD_OP_READ_OBJ; | 
|  | } | 
|  |  | 
|  | hdr.flags |= cache_flags; | 
|  |  | 
|  | hdr.oid = oid; | 
|  | hdr.data_length = datalen; | 
|  | hdr.offset = offset; | 
|  | hdr.copies = copies; | 
|  |  | 
|  | ret = do_req(fd, aio_context, (SheepdogReq *)&hdr, buf, &wlen, &rlen); | 
|  | if (ret) { | 
|  | error_report("failed to send a request to the sheep"); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | switch (rsp->result) { | 
|  | case SD_RES_SUCCESS: | 
|  | return 0; | 
|  | default: | 
|  | error_report("%s", sd_strerror(rsp->result)); | 
|  | return -EIO; | 
|  | } | 
|  | } | 
|  |  | 
|  | static int read_object(int fd, AioContext *aio_context, char *buf, | 
|  | uint64_t oid, uint8_t copies, | 
|  | unsigned int datalen, uint64_t offset, | 
|  | uint32_t cache_flags) | 
|  | { | 
|  | return read_write_object(fd, aio_context, buf, oid, copies, | 
|  | datalen, offset, false, | 
|  | false, cache_flags); | 
|  | } | 
|  |  | 
|  | static int write_object(int fd, AioContext *aio_context, char *buf, | 
|  | uint64_t oid, uint8_t copies, | 
|  | unsigned int datalen, uint64_t offset, bool create, | 
|  | uint32_t cache_flags) | 
|  | { | 
|  | return read_write_object(fd, aio_context, buf, oid, copies, | 
|  | datalen, offset, true, | 
|  | create, cache_flags); | 
|  | } | 
|  |  | 
|  | /* update inode with the latest state */ | 
|  | static int reload_inode(BDRVSheepdogState *s, uint32_t snapid, const char *tag) | 
|  | { | 
|  | Error *local_err = NULL; | 
|  | SheepdogInode *inode; | 
|  | int ret = 0, fd; | 
|  | uint32_t vid = 0; | 
|  |  | 
|  | fd = connect_to_sdog(s, &local_err); | 
|  | if (fd < 0) { | 
|  | error_report_err(local_err); | 
|  | return -EIO; | 
|  | } | 
|  |  | 
|  | inode = g_malloc(SD_INODE_HEADER_SIZE); | 
|  |  | 
|  | ret = find_vdi_name(s, s->name, snapid, tag, &vid, false, &local_err); | 
|  | if (ret) { | 
|  | error_report_err(local_err); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | ret = read_object(fd, s->aio_context, (char *)inode, vid_to_vdi_oid(vid), | 
|  | s->inode.nr_copies, SD_INODE_HEADER_SIZE, 0, | 
|  | s->cache_flags); | 
|  | if (ret < 0) { | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | if (inode->vdi_id != s->inode.vdi_id) { | 
|  | memcpy(&s->inode, inode, SD_INODE_HEADER_SIZE); | 
|  | } | 
|  |  | 
|  | out: | 
|  | g_free(inode); | 
|  | closesocket(fd); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static void coroutine_fn resend_aioreq(BDRVSheepdogState *s, AIOReq *aio_req) | 
|  | { | 
|  | SheepdogAIOCB *acb = aio_req->aiocb; | 
|  |  | 
|  | aio_req->create = false; | 
|  |  | 
|  | /* check whether this request becomes a CoW one */ | 
|  | if (acb->aiocb_type == AIOCB_WRITE_UDATA && is_data_obj(aio_req->oid)) { | 
|  | int idx = data_oid_to_idx(aio_req->oid); | 
|  |  | 
|  | if (is_data_obj_writable(&s->inode, idx)) { | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | if (s->inode.data_vdi_id[idx]) { | 
|  | aio_req->base_oid = vid_to_data_oid(s->inode.data_vdi_id[idx], idx); | 
|  | aio_req->flags |= SD_FLAG_CMD_COW; | 
|  | } | 
|  | aio_req->create = true; | 
|  | } | 
|  | out: | 
|  | if (is_data_obj(aio_req->oid)) { | 
|  | add_aio_request(s, aio_req, acb->qiov->iov, acb->qiov->niov, | 
|  | acb->aiocb_type); | 
|  | } else { | 
|  | struct iovec iov; | 
|  | iov.iov_base = &s->inode; | 
|  | iov.iov_len = sizeof(s->inode); | 
|  | add_aio_request(s, aio_req, &iov, 1, AIOCB_WRITE_UDATA); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void sd_detach_aio_context(BlockDriverState *bs) | 
|  | { | 
|  | BDRVSheepdogState *s = bs->opaque; | 
|  |  | 
|  | aio_set_fd_handler(s->aio_context, s->fd, false, NULL, | 
|  | NULL, NULL); | 
|  | } | 
|  |  | 
|  | static void sd_attach_aio_context(BlockDriverState *bs, | 
|  | AioContext *new_context) | 
|  | { | 
|  | BDRVSheepdogState *s = bs->opaque; | 
|  |  | 
|  | s->aio_context = new_context; | 
|  | aio_set_fd_handler(new_context, s->fd, false, | 
|  | co_read_response, NULL, s); | 
|  | } | 
|  |  | 
|  | /* TODO Convert to fine grained options */ | 
|  | static QemuOptsList runtime_opts = { | 
|  | .name = "sheepdog", | 
|  | .head = QTAILQ_HEAD_INITIALIZER(runtime_opts.head), | 
|  | .desc = { | 
|  | { | 
|  | .name = "filename", | 
|  | .type = QEMU_OPT_STRING, | 
|  | .help = "URL to the sheepdog image", | 
|  | }, | 
|  | { /* end of list */ } | 
|  | }, | 
|  | }; | 
|  |  | 
|  | static int sd_open(BlockDriverState *bs, QDict *options, int flags, | 
|  | Error **errp) | 
|  | { | 
|  | int ret, fd; | 
|  | uint32_t vid = 0; | 
|  | BDRVSheepdogState *s = bs->opaque; | 
|  | char vdi[SD_MAX_VDI_LEN], tag[SD_MAX_VDI_TAG_LEN]; | 
|  | uint32_t snapid; | 
|  | char *buf = NULL; | 
|  | QemuOpts *opts; | 
|  | Error *local_err = NULL; | 
|  | const char *filename; | 
|  |  | 
|  | s->bs = bs; | 
|  | s->aio_context = bdrv_get_aio_context(bs); | 
|  |  | 
|  | opts = qemu_opts_create(&runtime_opts, NULL, 0, &error_abort); | 
|  | qemu_opts_absorb_qdict(opts, options, &local_err); | 
|  | if (local_err) { | 
|  | error_propagate(errp, local_err); | 
|  | ret = -EINVAL; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | filename = qemu_opt_get(opts, "filename"); | 
|  |  | 
|  | QLIST_INIT(&s->inflight_aio_head); | 
|  | QLIST_INIT(&s->failed_aio_head); | 
|  | QLIST_INIT(&s->inflight_aiocb_head); | 
|  | s->fd = -1; | 
|  |  | 
|  | memset(vdi, 0, sizeof(vdi)); | 
|  | memset(tag, 0, sizeof(tag)); | 
|  |  | 
|  | if (strstr(filename, "://")) { | 
|  | ret = sd_parse_uri(s, filename, vdi, &snapid, tag); | 
|  | } else { | 
|  | ret = parse_vdiname(s, filename, vdi, &snapid, tag); | 
|  | } | 
|  | if (ret < 0) { | 
|  | error_setg(errp, "Can't parse filename"); | 
|  | goto out; | 
|  | } | 
|  | s->fd = get_sheep_fd(s, errp); | 
|  | if (s->fd < 0) { | 
|  | ret = s->fd; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | ret = find_vdi_name(s, vdi, snapid, tag, &vid, true, errp); | 
|  | if (ret) { | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * QEMU block layer emulates writethrough cache as 'writeback + flush', so | 
|  | * we always set SD_FLAG_CMD_CACHE (writeback cache) as default. | 
|  | */ | 
|  | s->cache_flags = SD_FLAG_CMD_CACHE; | 
|  | if (flags & BDRV_O_NOCACHE) { | 
|  | s->cache_flags = SD_FLAG_CMD_DIRECT; | 
|  | } | 
|  | s->discard_supported = true; | 
|  |  | 
|  | if (snapid || tag[0] != '\0') { | 
|  | DPRINTF("%" PRIx32 " snapshot inode was open.\n", vid); | 
|  | s->is_snapshot = true; | 
|  | } | 
|  |  | 
|  | fd = connect_to_sdog(s, errp); | 
|  | if (fd < 0) { | 
|  | ret = fd; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | buf = g_malloc(SD_INODE_SIZE); | 
|  | ret = read_object(fd, s->aio_context, buf, vid_to_vdi_oid(vid), | 
|  | 0, SD_INODE_SIZE, 0, s->cache_flags); | 
|  |  | 
|  | closesocket(fd); | 
|  |  | 
|  | if (ret) { | 
|  | error_setg(errp, "Can't read snapshot inode"); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | memcpy(&s->inode, buf, sizeof(s->inode)); | 
|  |  | 
|  | bs->total_sectors = s->inode.vdi_size / BDRV_SECTOR_SIZE; | 
|  | pstrcpy(s->name, sizeof(s->name), vdi); | 
|  | qemu_co_mutex_init(&s->lock); | 
|  | qemu_co_queue_init(&s->overlapping_queue); | 
|  | qemu_opts_del(opts); | 
|  | g_free(buf); | 
|  | return 0; | 
|  | out: | 
|  | aio_set_fd_handler(bdrv_get_aio_context(bs), s->fd, | 
|  | false, NULL, NULL, NULL); | 
|  | if (s->fd >= 0) { | 
|  | closesocket(s->fd); | 
|  | } | 
|  | qemu_opts_del(opts); | 
|  | g_free(buf); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int sd_reopen_prepare(BDRVReopenState *state, BlockReopenQueue *queue, | 
|  | Error **errp) | 
|  | { | 
|  | BDRVSheepdogState *s = state->bs->opaque; | 
|  | BDRVSheepdogReopenState *re_s; | 
|  | int ret = 0; | 
|  |  | 
|  | re_s = state->opaque = g_new0(BDRVSheepdogReopenState, 1); | 
|  |  | 
|  | re_s->cache_flags = SD_FLAG_CMD_CACHE; | 
|  | if (state->flags & BDRV_O_NOCACHE) { | 
|  | re_s->cache_flags = SD_FLAG_CMD_DIRECT; | 
|  | } | 
|  |  | 
|  | re_s->fd = get_sheep_fd(s, errp); | 
|  | if (re_s->fd < 0) { | 
|  | ret = re_s->fd; | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static void sd_reopen_commit(BDRVReopenState *state) | 
|  | { | 
|  | BDRVSheepdogReopenState *re_s = state->opaque; | 
|  | BDRVSheepdogState *s = state->bs->opaque; | 
|  |  | 
|  | if (s->fd) { | 
|  | aio_set_fd_handler(s->aio_context, s->fd, false, | 
|  | NULL, NULL, NULL); | 
|  | closesocket(s->fd); | 
|  | } | 
|  |  | 
|  | s->fd = re_s->fd; | 
|  | s->cache_flags = re_s->cache_flags; | 
|  |  | 
|  | g_free(state->opaque); | 
|  | state->opaque = NULL; | 
|  |  | 
|  | return; | 
|  | } | 
|  |  | 
|  | static void sd_reopen_abort(BDRVReopenState *state) | 
|  | { | 
|  | BDRVSheepdogReopenState *re_s = state->opaque; | 
|  | BDRVSheepdogState *s = state->bs->opaque; | 
|  |  | 
|  | if (re_s == NULL) { | 
|  | return; | 
|  | } | 
|  |  | 
|  | if (re_s->fd) { | 
|  | aio_set_fd_handler(s->aio_context, re_s->fd, false, | 
|  | NULL, NULL, NULL); | 
|  | closesocket(re_s->fd); | 
|  | } | 
|  |  | 
|  | g_free(state->opaque); | 
|  | state->opaque = NULL; | 
|  |  | 
|  | return; | 
|  | } | 
|  |  | 
|  | static int do_sd_create(BDRVSheepdogState *s, uint32_t *vdi_id, int snapshot, | 
|  | Error **errp) | 
|  | { | 
|  | SheepdogVdiReq hdr; | 
|  | SheepdogVdiRsp *rsp = (SheepdogVdiRsp *)&hdr; | 
|  | int fd, ret; | 
|  | unsigned int wlen, rlen = 0; | 
|  | char buf[SD_MAX_VDI_LEN]; | 
|  |  | 
|  | fd = connect_to_sdog(s, errp); | 
|  | if (fd < 0) { | 
|  | return fd; | 
|  | } | 
|  |  | 
|  | /* FIXME: would it be better to fail (e.g., return -EIO) when filename | 
|  | * does not fit in buf?  For now, just truncate and avoid buffer overrun. | 
|  | */ | 
|  | memset(buf, 0, sizeof(buf)); | 
|  | pstrcpy(buf, sizeof(buf), s->name); | 
|  |  | 
|  | memset(&hdr, 0, sizeof(hdr)); | 
|  | hdr.opcode = SD_OP_NEW_VDI; | 
|  | hdr.base_vdi_id = s->inode.vdi_id; | 
|  |  | 
|  | wlen = SD_MAX_VDI_LEN; | 
|  |  | 
|  | hdr.flags = SD_FLAG_CMD_WRITE; | 
|  | hdr.snapid = snapshot; | 
|  |  | 
|  | hdr.data_length = wlen; | 
|  | hdr.vdi_size = s->inode.vdi_size; | 
|  | hdr.copy_policy = s->inode.copy_policy; | 
|  | hdr.copies = s->inode.nr_copies; | 
|  | hdr.block_size_shift = s->inode.block_size_shift; | 
|  |  | 
|  | ret = do_req(fd, s->aio_context, (SheepdogReq *)&hdr, buf, &wlen, &rlen); | 
|  |  | 
|  | closesocket(fd); | 
|  |  | 
|  | if (ret) { | 
|  | error_setg_errno(errp, -ret, "create failed"); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | if (rsp->result != SD_RES_SUCCESS) { | 
|  | error_setg(errp, "%s, %s", sd_strerror(rsp->result), s->inode.name); | 
|  | return -EIO; | 
|  | } | 
|  |  | 
|  | if (vdi_id) { | 
|  | *vdi_id = rsp->vdi_id; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int sd_prealloc(const char *filename, Error **errp) | 
|  | { | 
|  | BlockDriverState *bs = NULL; | 
|  | BDRVSheepdogState *base = NULL; | 
|  | unsigned long buf_size; | 
|  | uint32_t idx, max_idx; | 
|  | uint32_t object_size; | 
|  | int64_t vdi_size; | 
|  | void *buf = NULL; | 
|  | int ret; | 
|  |  | 
|  | ret = bdrv_open(&bs, filename, NULL, NULL, BDRV_O_RDWR | BDRV_O_PROTOCOL, | 
|  | errp); | 
|  | if (ret < 0) { | 
|  | goto out_with_err_set; | 
|  | } | 
|  |  | 
|  | vdi_size = bdrv_getlength(bs); | 
|  | if (vdi_size < 0) { | 
|  | ret = vdi_size; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | base = bs->opaque; | 
|  | object_size = (UINT32_C(1) << base->inode.block_size_shift); | 
|  | buf_size = MIN(object_size, SD_DATA_OBJ_SIZE); | 
|  | buf = g_malloc0(buf_size); | 
|  |  | 
|  | max_idx = DIV_ROUND_UP(vdi_size, buf_size); | 
|  |  | 
|  | for (idx = 0; idx < max_idx; idx++) { | 
|  | /* | 
|  | * The created image can be a cloned image, so we need to read | 
|  | * a data from the source image. | 
|  | */ | 
|  | ret = bdrv_pread(bs, idx * buf_size, buf, buf_size); | 
|  | if (ret < 0) { | 
|  | goto out; | 
|  | } | 
|  | ret = bdrv_pwrite(bs, idx * buf_size, buf, buf_size); | 
|  | if (ret < 0) { | 
|  | goto out; | 
|  | } | 
|  | } | 
|  |  | 
|  | out: | 
|  | if (ret < 0) { | 
|  | error_setg_errno(errp, -ret, "Can't pre-allocate"); | 
|  | } | 
|  | out_with_err_set: | 
|  | if (bs) { | 
|  | bdrv_unref(bs); | 
|  | } | 
|  | g_free(buf); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Sheepdog support two kinds of redundancy, full replication and erasure | 
|  | * coding. | 
|  | * | 
|  | * # create a fully replicated vdi with x copies | 
|  | * -o redundancy=x (1 <= x <= SD_MAX_COPIES) | 
|  | * | 
|  | * # create a erasure coded vdi with x data strips and y parity strips | 
|  | * -o redundancy=x:y (x must be one of {2,4,8,16} and 1 <= y < SD_EC_MAX_STRIP) | 
|  | */ | 
|  | static int parse_redundancy(BDRVSheepdogState *s, const char *opt) | 
|  | { | 
|  | struct SheepdogInode *inode = &s->inode; | 
|  | const char *n1, *n2; | 
|  | long copy, parity; | 
|  | char p[10]; | 
|  |  | 
|  | pstrcpy(p, sizeof(p), opt); | 
|  | n1 = strtok(p, ":"); | 
|  | n2 = strtok(NULL, ":"); | 
|  |  | 
|  | if (!n1) { | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | copy = strtol(n1, NULL, 10); | 
|  | if (copy > SD_MAX_COPIES || copy < 1) { | 
|  | return -EINVAL; | 
|  | } | 
|  | if (!n2) { | 
|  | inode->copy_policy = 0; | 
|  | inode->nr_copies = copy; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | if (copy != 2 && copy != 4 && copy != 8 && copy != 16) { | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | parity = strtol(n2, NULL, 10); | 
|  | if (parity >= SD_EC_MAX_STRIP || parity < 1) { | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * 4 bits for parity and 4 bits for data. | 
|  | * We have to compress upper data bits because it can't represent 16 | 
|  | */ | 
|  | inode->copy_policy = ((copy / 2) << 4) + parity; | 
|  | inode->nr_copies = copy + parity; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int parse_block_size_shift(BDRVSheepdogState *s, QemuOpts *opt) | 
|  | { | 
|  | struct SheepdogInode *inode = &s->inode; | 
|  | uint64_t object_size; | 
|  | int obj_order; | 
|  |  | 
|  | object_size = qemu_opt_get_size_del(opt, BLOCK_OPT_OBJECT_SIZE, 0); | 
|  | if (object_size) { | 
|  | if ((object_size - 1) & object_size) {    /* not a power of 2? */ | 
|  | return -EINVAL; | 
|  | } | 
|  | obj_order = ctz32(object_size); | 
|  | if (obj_order < 20 || obj_order > 31) { | 
|  | return -EINVAL; | 
|  | } | 
|  | inode->block_size_shift = (uint8_t)obj_order; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int sd_create(const char *filename, QemuOpts *opts, | 
|  | Error **errp) | 
|  | { | 
|  | int ret = 0; | 
|  | uint32_t vid = 0; | 
|  | char *backing_file = NULL; | 
|  | char *buf = NULL; | 
|  | BDRVSheepdogState *s; | 
|  | char tag[SD_MAX_VDI_TAG_LEN]; | 
|  | uint32_t snapid; | 
|  | uint64_t max_vdi_size; | 
|  | bool prealloc = false; | 
|  |  | 
|  | s = g_new0(BDRVSheepdogState, 1); | 
|  |  | 
|  | memset(tag, 0, sizeof(tag)); | 
|  | if (strstr(filename, "://")) { | 
|  | ret = sd_parse_uri(s, filename, s->name, &snapid, tag); | 
|  | } else { | 
|  | ret = parse_vdiname(s, filename, s->name, &snapid, tag); | 
|  | } | 
|  | if (ret < 0) { | 
|  | error_setg(errp, "Can't parse filename"); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | s->inode.vdi_size = ROUND_UP(qemu_opt_get_size_del(opts, BLOCK_OPT_SIZE, 0), | 
|  | BDRV_SECTOR_SIZE); | 
|  | backing_file = qemu_opt_get_del(opts, BLOCK_OPT_BACKING_FILE); | 
|  | buf = qemu_opt_get_del(opts, BLOCK_OPT_PREALLOC); | 
|  | if (!buf || !strcmp(buf, "off")) { | 
|  | prealloc = false; | 
|  | } else if (!strcmp(buf, "full")) { | 
|  | prealloc = true; | 
|  | } else { | 
|  | error_setg(errp, "Invalid preallocation mode: '%s'", buf); | 
|  | ret = -EINVAL; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | g_free(buf); | 
|  | buf = qemu_opt_get_del(opts, BLOCK_OPT_REDUNDANCY); | 
|  | if (buf) { | 
|  | ret = parse_redundancy(s, buf); | 
|  | if (ret < 0) { | 
|  | error_setg(errp, "Invalid redundancy mode: '%s'", buf); | 
|  | goto out; | 
|  | } | 
|  | } | 
|  | ret = parse_block_size_shift(s, opts); | 
|  | if (ret < 0) { | 
|  | error_setg(errp, "Invalid object_size." | 
|  | " obect_size needs to be power of 2" | 
|  | " and be limited from 2^20 to 2^31"); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | if (backing_file) { | 
|  | BlockDriverState *bs; | 
|  | BDRVSheepdogState *base; | 
|  | BlockDriver *drv; | 
|  |  | 
|  | /* Currently, only Sheepdog backing image is supported. */ | 
|  | drv = bdrv_find_protocol(backing_file, true, NULL); | 
|  | if (!drv || strcmp(drv->protocol_name, "sheepdog") != 0) { | 
|  | error_setg(errp, "backing_file must be a sheepdog image"); | 
|  | ret = -EINVAL; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | bs = NULL; | 
|  | ret = bdrv_open(&bs, backing_file, NULL, NULL, BDRV_O_PROTOCOL, errp); | 
|  | if (ret < 0) { | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | base = bs->opaque; | 
|  |  | 
|  | if (!is_snapshot(&base->inode)) { | 
|  | error_setg(errp, "cannot clone from a non snapshot vdi"); | 
|  | bdrv_unref(bs); | 
|  | ret = -EINVAL; | 
|  | goto out; | 
|  | } | 
|  | s->inode.vdi_id = base->inode.vdi_id; | 
|  | bdrv_unref(bs); | 
|  | } | 
|  |  | 
|  | s->aio_context = qemu_get_aio_context(); | 
|  |  | 
|  | /* if block_size_shift is not specified, get cluster default value */ | 
|  | if (s->inode.block_size_shift == 0) { | 
|  | SheepdogVdiReq hdr; | 
|  | SheepdogClusterRsp *rsp = (SheepdogClusterRsp *)&hdr; | 
|  | Error *local_err = NULL; | 
|  | int fd; | 
|  | unsigned int wlen = 0, rlen = 0; | 
|  |  | 
|  | fd = connect_to_sdog(s, &local_err); | 
|  | if (fd < 0) { | 
|  | error_report("%s", error_get_pretty(local_err)); | 
|  | error_free(local_err); | 
|  | ret = -EIO; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | memset(&hdr, 0, sizeof(hdr)); | 
|  | hdr.opcode = SD_OP_GET_CLUSTER_DEFAULT; | 
|  | hdr.proto_ver = SD_PROTO_VER; | 
|  |  | 
|  | ret = do_req(fd, s->aio_context, (SheepdogReq *)&hdr, | 
|  | NULL, &wlen, &rlen); | 
|  | closesocket(fd); | 
|  | if (ret) { | 
|  | error_setg_errno(errp, -ret, "failed to get cluster default"); | 
|  | goto out; | 
|  | } | 
|  | if (rsp->result == SD_RES_SUCCESS) { | 
|  | s->inode.block_size_shift = rsp->block_size_shift; | 
|  | } else { | 
|  | s->inode.block_size_shift = SD_DEFAULT_BLOCK_SIZE_SHIFT; | 
|  | } | 
|  | } | 
|  |  | 
|  | max_vdi_size = (UINT64_C(1) << s->inode.block_size_shift) * MAX_DATA_OBJS; | 
|  |  | 
|  | if (s->inode.vdi_size > max_vdi_size) { | 
|  | error_setg(errp, "An image is too large." | 
|  | " The maximum image size is %"PRIu64 "GB", | 
|  | max_vdi_size / 1024 / 1024 / 1024); | 
|  | ret = -EINVAL; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | ret = do_sd_create(s, &vid, 0, errp); | 
|  | if (ret) { | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | if (prealloc) { | 
|  | ret = sd_prealloc(filename, errp); | 
|  | } | 
|  | out: | 
|  | g_free(backing_file); | 
|  | g_free(buf); | 
|  | g_free(s); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static void sd_close(BlockDriverState *bs) | 
|  | { | 
|  | Error *local_err = NULL; | 
|  | BDRVSheepdogState *s = bs->opaque; | 
|  | SheepdogVdiReq hdr; | 
|  | SheepdogVdiRsp *rsp = (SheepdogVdiRsp *)&hdr; | 
|  | unsigned int wlen, rlen = 0; | 
|  | int fd, ret; | 
|  |  | 
|  | DPRINTF("%s\n", s->name); | 
|  |  | 
|  | fd = connect_to_sdog(s, &local_err); | 
|  | if (fd < 0) { | 
|  | error_report_err(local_err); | 
|  | return; | 
|  | } | 
|  |  | 
|  | memset(&hdr, 0, sizeof(hdr)); | 
|  |  | 
|  | hdr.opcode = SD_OP_RELEASE_VDI; | 
|  | hdr.type = LOCK_TYPE_NORMAL; | 
|  | hdr.base_vdi_id = s->inode.vdi_id; | 
|  | wlen = strlen(s->name) + 1; | 
|  | hdr.data_length = wlen; | 
|  | hdr.flags = SD_FLAG_CMD_WRITE; | 
|  |  | 
|  | ret = do_req(fd, s->aio_context, (SheepdogReq *)&hdr, | 
|  | s->name, &wlen, &rlen); | 
|  |  | 
|  | closesocket(fd); | 
|  |  | 
|  | if (!ret && rsp->result != SD_RES_SUCCESS && | 
|  | rsp->result != SD_RES_VDI_NOT_LOCKED) { | 
|  | error_report("%s, %s", sd_strerror(rsp->result), s->name); | 
|  | } | 
|  |  | 
|  | aio_set_fd_handler(bdrv_get_aio_context(bs), s->fd, | 
|  | false, NULL, NULL, NULL); | 
|  | closesocket(s->fd); | 
|  | g_free(s->host_spec); | 
|  | } | 
|  |  | 
|  | static int64_t sd_getlength(BlockDriverState *bs) | 
|  | { | 
|  | BDRVSheepdogState *s = bs->opaque; | 
|  |  | 
|  | return s->inode.vdi_size; | 
|  | } | 
|  |  | 
|  | static int sd_truncate(BlockDriverState *bs, int64_t offset) | 
|  | { | 
|  | Error *local_err = NULL; | 
|  | BDRVSheepdogState *s = bs->opaque; | 
|  | int ret, fd; | 
|  | unsigned int datalen; | 
|  | uint64_t max_vdi_size; | 
|  |  | 
|  | max_vdi_size = (UINT64_C(1) << s->inode.block_size_shift) * MAX_DATA_OBJS; | 
|  | if (offset < s->inode.vdi_size) { | 
|  | error_report("shrinking is not supported"); | 
|  | return -EINVAL; | 
|  | } else if (offset > max_vdi_size) { | 
|  | error_report("too big image size"); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | fd = connect_to_sdog(s, &local_err); | 
|  | if (fd < 0) { | 
|  | error_report_err(local_err); | 
|  | return fd; | 
|  | } | 
|  |  | 
|  | /* we don't need to update entire object */ | 
|  | datalen = SD_INODE_SIZE - sizeof(s->inode.data_vdi_id); | 
|  | s->inode.vdi_size = offset; | 
|  | ret = write_object(fd, s->aio_context, (char *)&s->inode, | 
|  | vid_to_vdi_oid(s->inode.vdi_id), s->inode.nr_copies, | 
|  | datalen, 0, false, s->cache_flags); | 
|  | close(fd); | 
|  |  | 
|  | if (ret < 0) { | 
|  | error_report("failed to update an inode."); | 
|  | } | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * This function is called after writing data objects.  If we need to | 
|  | * update metadata, this sends a write request to the vdi object. | 
|  | * Otherwise, this switches back to sd_co_readv/writev. | 
|  | */ | 
|  | static void coroutine_fn sd_write_done(SheepdogAIOCB *acb) | 
|  | { | 
|  | BDRVSheepdogState *s = acb->common.bs->opaque; | 
|  | struct iovec iov; | 
|  | AIOReq *aio_req; | 
|  | uint32_t offset, data_len, mn, mx; | 
|  |  | 
|  | mn = acb->min_dirty_data_idx; | 
|  | mx = acb->max_dirty_data_idx; | 
|  | if (mn <= mx) { | 
|  | /* we need to update the vdi object. */ | 
|  | offset = sizeof(s->inode) - sizeof(s->inode.data_vdi_id) + | 
|  | mn * sizeof(s->inode.data_vdi_id[0]); | 
|  | data_len = (mx - mn + 1) * sizeof(s->inode.data_vdi_id[0]); | 
|  |  | 
|  | acb->min_dirty_data_idx = UINT32_MAX; | 
|  | acb->max_dirty_data_idx = 0; | 
|  |  | 
|  | iov.iov_base = &s->inode; | 
|  | iov.iov_len = sizeof(s->inode); | 
|  | aio_req = alloc_aio_req(s, acb, vid_to_vdi_oid(s->inode.vdi_id), | 
|  | data_len, offset, 0, false, 0, offset); | 
|  | QLIST_INSERT_HEAD(&s->inflight_aio_head, aio_req, aio_siblings); | 
|  | add_aio_request(s, aio_req, &iov, 1, AIOCB_WRITE_UDATA); | 
|  |  | 
|  | acb->aio_done_func = sd_finish_aiocb; | 
|  | acb->aiocb_type = AIOCB_WRITE_UDATA; | 
|  | return; | 
|  | } | 
|  |  | 
|  | sd_finish_aiocb(acb); | 
|  | } | 
|  |  | 
|  | /* Delete current working VDI on the snapshot chain */ | 
|  | static bool sd_delete(BDRVSheepdogState *s) | 
|  | { | 
|  | Error *local_err = NULL; | 
|  | unsigned int wlen = SD_MAX_VDI_LEN, rlen = 0; | 
|  | SheepdogVdiReq hdr = { | 
|  | .opcode = SD_OP_DEL_VDI, | 
|  | .base_vdi_id = s->inode.vdi_id, | 
|  | .data_length = wlen, | 
|  | .flags = SD_FLAG_CMD_WRITE, | 
|  | }; | 
|  | SheepdogVdiRsp *rsp = (SheepdogVdiRsp *)&hdr; | 
|  | int fd, ret; | 
|  |  | 
|  | fd = connect_to_sdog(s, &local_err); | 
|  | if (fd < 0) { | 
|  | error_report_err(local_err); | 
|  | return false; | 
|  | } | 
|  |  | 
|  | ret = do_req(fd, s->aio_context, (SheepdogReq *)&hdr, | 
|  | s->name, &wlen, &rlen); | 
|  | closesocket(fd); | 
|  | if (ret) { | 
|  | return false; | 
|  | } | 
|  | switch (rsp->result) { | 
|  | case SD_RES_NO_VDI: | 
|  | error_report("%s was already deleted", s->name); | 
|  | /* fall through */ | 
|  | case SD_RES_SUCCESS: | 
|  | break; | 
|  | default: | 
|  | error_report("%s, %s", sd_strerror(rsp->result), s->name); | 
|  | return false; | 
|  | } | 
|  |  | 
|  | return true; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Create a writable VDI from a snapshot | 
|  | */ | 
|  | static int sd_create_branch(BDRVSheepdogState *s) | 
|  | { | 
|  | Error *local_err = NULL; | 
|  | int ret, fd; | 
|  | uint32_t vid; | 
|  | char *buf; | 
|  | bool deleted; | 
|  |  | 
|  | DPRINTF("%" PRIx32 " is snapshot.\n", s->inode.vdi_id); | 
|  |  | 
|  | buf = g_malloc(SD_INODE_SIZE); | 
|  |  | 
|  | /* | 
|  | * Even If deletion fails, we will just create extra snapshot based on | 
|  | * the working VDI which was supposed to be deleted. So no need to | 
|  | * false bail out. | 
|  | */ | 
|  | deleted = sd_delete(s); | 
|  | ret = do_sd_create(s, &vid, !deleted, &local_err); | 
|  | if (ret) { | 
|  | error_report_err(local_err); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | DPRINTF("%" PRIx32 " is created.\n", vid); | 
|  |  | 
|  | fd = connect_to_sdog(s, &local_err); | 
|  | if (fd < 0) { | 
|  | error_report_err(local_err); | 
|  | ret = fd; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | ret = read_object(fd, s->aio_context, buf, vid_to_vdi_oid(vid), | 
|  | s->inode.nr_copies, SD_INODE_SIZE, 0, s->cache_flags); | 
|  |  | 
|  | closesocket(fd); | 
|  |  | 
|  | if (ret < 0) { | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | memcpy(&s->inode, buf, sizeof(s->inode)); | 
|  |  | 
|  | s->is_snapshot = false; | 
|  | ret = 0; | 
|  | DPRINTF("%" PRIx32 " was newly created.\n", s->inode.vdi_id); | 
|  |  | 
|  | out: | 
|  | g_free(buf); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Send I/O requests to the server. | 
|  | * | 
|  | * This function sends requests to the server, links the requests to | 
|  | * the inflight_list in BDRVSheepdogState, and exits without | 
|  | * waiting the response.  The responses are received in the | 
|  | * `aio_read_response' function which is called from the main loop as | 
|  | * a fd handler. | 
|  | * | 
|  | * Returns 1 when we need to wait a response, 0 when there is no sent | 
|  | * request and -errno in error cases. | 
|  | */ | 
|  | static int coroutine_fn sd_co_rw_vector(void *p) | 
|  | { | 
|  | SheepdogAIOCB *acb = p; | 
|  | int ret = 0; | 
|  | unsigned long len, done = 0, total = acb->nb_sectors * BDRV_SECTOR_SIZE; | 
|  | unsigned long idx; | 
|  | uint32_t object_size; | 
|  | uint64_t oid; | 
|  | uint64_t offset; | 
|  | BDRVSheepdogState *s = acb->common.bs->opaque; | 
|  | SheepdogInode *inode = &s->inode; | 
|  | AIOReq *aio_req; | 
|  |  | 
|  | if (acb->aiocb_type == AIOCB_WRITE_UDATA && s->is_snapshot) { | 
|  | /* | 
|  | * In the case we open the snapshot VDI, Sheepdog creates the | 
|  | * writable VDI when we do a write operation first. | 
|  | */ | 
|  | ret = sd_create_branch(s); | 
|  | if (ret) { | 
|  | acb->ret = -EIO; | 
|  | goto out; | 
|  | } | 
|  | } | 
|  |  | 
|  | object_size = (UINT32_C(1) << inode->block_size_shift); | 
|  | idx = acb->sector_num * BDRV_SECTOR_SIZE / object_size; | 
|  | offset = (acb->sector_num * BDRV_SECTOR_SIZE) % object_size; | 
|  |  | 
|  | /* | 
|  | * Make sure we don't free the aiocb before we are done with all requests. | 
|  | * This additional reference is dropped at the end of this function. | 
|  | */ | 
|  | acb->nr_pending++; | 
|  |  | 
|  | while (done != total) { | 
|  | uint8_t flags = 0; | 
|  | uint64_t old_oid = 0; | 
|  | bool create = false; | 
|  |  | 
|  | oid = vid_to_data_oid(inode->data_vdi_id[idx], idx); | 
|  |  | 
|  | len = MIN(total - done, object_size - offset); | 
|  |  | 
|  | switch (acb->aiocb_type) { | 
|  | case AIOCB_READ_UDATA: | 
|  | if (!inode->data_vdi_id[idx]) { | 
|  | qemu_iovec_memset(acb->qiov, done, 0, len); | 
|  | goto done; | 
|  | } | 
|  | break; | 
|  | case AIOCB_WRITE_UDATA: | 
|  | if (!inode->data_vdi_id[idx]) { | 
|  | create = true; | 
|  | } else if (!is_data_obj_writable(inode, idx)) { | 
|  | /* Copy-On-Write */ | 
|  | create = true; | 
|  | old_oid = oid; | 
|  | flags = SD_FLAG_CMD_COW; | 
|  | } | 
|  | break; | 
|  | case AIOCB_DISCARD_OBJ: | 
|  | /* | 
|  | * We discard the object only when the whole object is | 
|  | * 1) allocated 2) trimmed. Otherwise, simply skip it. | 
|  | */ | 
|  | if (len != object_size || inode->data_vdi_id[idx] == 0) { | 
|  | goto done; | 
|  | } | 
|  | break; | 
|  | default: | 
|  | break; | 
|  | } | 
|  |  | 
|  | if (create) { | 
|  | DPRINTF("update ino (%" PRIu32 ") %" PRIu64 " %" PRIu64 " %ld\n", | 
|  | inode->vdi_id, oid, | 
|  | vid_to_data_oid(inode->data_vdi_id[idx], idx), idx); | 
|  | oid = vid_to_data_oid(inode->vdi_id, idx); | 
|  | DPRINTF("new oid %" PRIx64 "\n", oid); | 
|  | } | 
|  |  | 
|  | aio_req = alloc_aio_req(s, acb, oid, len, offset, flags, create, | 
|  | old_oid, | 
|  | acb->aiocb_type == AIOCB_DISCARD_OBJ ? | 
|  | 0 : done); | 
|  | QLIST_INSERT_HEAD(&s->inflight_aio_head, aio_req, aio_siblings); | 
|  |  | 
|  | add_aio_request(s, aio_req, acb->qiov->iov, acb->qiov->niov, | 
|  | acb->aiocb_type); | 
|  | done: | 
|  | offset = 0; | 
|  | idx++; | 
|  | done += len; | 
|  | } | 
|  | out: | 
|  | if (!--acb->nr_pending) { | 
|  | return acb->ret; | 
|  | } | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | static bool check_overlapping_aiocb(BDRVSheepdogState *s, SheepdogAIOCB *aiocb) | 
|  | { | 
|  | SheepdogAIOCB *cb; | 
|  |  | 
|  | QLIST_FOREACH(cb, &s->inflight_aiocb_head, aiocb_siblings) { | 
|  | if (AIOCBOverlapping(aiocb, cb)) { | 
|  | return true; | 
|  | } | 
|  | } | 
|  |  | 
|  | QLIST_INSERT_HEAD(&s->inflight_aiocb_head, aiocb, aiocb_siblings); | 
|  | return false; | 
|  | } | 
|  |  | 
|  | static coroutine_fn int sd_co_writev(BlockDriverState *bs, int64_t sector_num, | 
|  | int nb_sectors, QEMUIOVector *qiov) | 
|  | { | 
|  | SheepdogAIOCB *acb; | 
|  | int ret; | 
|  | int64_t offset = (sector_num + nb_sectors) * BDRV_SECTOR_SIZE; | 
|  | BDRVSheepdogState *s = bs->opaque; | 
|  |  | 
|  | if (offset > s->inode.vdi_size) { | 
|  | ret = sd_truncate(bs, offset); | 
|  | if (ret < 0) { | 
|  | return ret; | 
|  | } | 
|  | } | 
|  |  | 
|  | acb = sd_aio_setup(bs, qiov, sector_num, nb_sectors); | 
|  | acb->aio_done_func = sd_write_done; | 
|  | acb->aiocb_type = AIOCB_WRITE_UDATA; | 
|  |  | 
|  | retry: | 
|  | if (check_overlapping_aiocb(s, acb)) { | 
|  | qemu_co_queue_wait(&s->overlapping_queue); | 
|  | goto retry; | 
|  | } | 
|  |  | 
|  | ret = sd_co_rw_vector(acb); | 
|  | if (ret <= 0) { | 
|  | QLIST_REMOVE(acb, aiocb_siblings); | 
|  | qemu_co_queue_restart_all(&s->overlapping_queue); | 
|  | qemu_aio_unref(acb); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | qemu_coroutine_yield(); | 
|  |  | 
|  | QLIST_REMOVE(acb, aiocb_siblings); | 
|  | qemu_co_queue_restart_all(&s->overlapping_queue); | 
|  |  | 
|  | return acb->ret; | 
|  | } | 
|  |  | 
|  | static coroutine_fn int sd_co_readv(BlockDriverState *bs, int64_t sector_num, | 
|  | int nb_sectors, QEMUIOVector *qiov) | 
|  | { | 
|  | SheepdogAIOCB *acb; | 
|  | int ret; | 
|  | BDRVSheepdogState *s = bs->opaque; | 
|  |  | 
|  | acb = sd_aio_setup(bs, qiov, sector_num, nb_sectors); | 
|  | acb->aiocb_type = AIOCB_READ_UDATA; | 
|  | acb->aio_done_func = sd_finish_aiocb; | 
|  |  | 
|  | retry: | 
|  | if (check_overlapping_aiocb(s, acb)) { | 
|  | qemu_co_queue_wait(&s->overlapping_queue); | 
|  | goto retry; | 
|  | } | 
|  |  | 
|  | ret = sd_co_rw_vector(acb); | 
|  | if (ret <= 0) { | 
|  | QLIST_REMOVE(acb, aiocb_siblings); | 
|  | qemu_co_queue_restart_all(&s->overlapping_queue); | 
|  | qemu_aio_unref(acb); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | qemu_coroutine_yield(); | 
|  |  | 
|  | QLIST_REMOVE(acb, aiocb_siblings); | 
|  | qemu_co_queue_restart_all(&s->overlapping_queue); | 
|  | return acb->ret; | 
|  | } | 
|  |  | 
|  | static int coroutine_fn sd_co_flush_to_disk(BlockDriverState *bs) | 
|  | { | 
|  | BDRVSheepdogState *s = bs->opaque; | 
|  | SheepdogAIOCB *acb; | 
|  | AIOReq *aio_req; | 
|  |  | 
|  | if (s->cache_flags != SD_FLAG_CMD_CACHE) { | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | acb = sd_aio_setup(bs, NULL, 0, 0); | 
|  | acb->aiocb_type = AIOCB_FLUSH_CACHE; | 
|  | acb->aio_done_func = sd_finish_aiocb; | 
|  |  | 
|  | aio_req = alloc_aio_req(s, acb, vid_to_vdi_oid(s->inode.vdi_id), | 
|  | 0, 0, 0, false, 0, 0); | 
|  | QLIST_INSERT_HEAD(&s->inflight_aio_head, aio_req, aio_siblings); | 
|  | add_aio_request(s, aio_req, NULL, 0, acb->aiocb_type); | 
|  |  | 
|  | qemu_coroutine_yield(); | 
|  | return acb->ret; | 
|  | } | 
|  |  | 
|  | static int sd_snapshot_create(BlockDriverState *bs, QEMUSnapshotInfo *sn_info) | 
|  | { | 
|  | Error *local_err = NULL; | 
|  | BDRVSheepdogState *s = bs->opaque; | 
|  | int ret, fd; | 
|  | uint32_t new_vid; | 
|  | SheepdogInode *inode; | 
|  | unsigned int datalen; | 
|  |  | 
|  | DPRINTF("sn_info: name %s id_str %s s: name %s vm_state_size %" PRId64 " " | 
|  | "is_snapshot %d\n", sn_info->name, sn_info->id_str, | 
|  | s->name, sn_info->vm_state_size, s->is_snapshot); | 
|  |  | 
|  | if (s->is_snapshot) { | 
|  | error_report("You can't create a snapshot of a snapshot VDI, " | 
|  | "%s (%" PRIu32 ").", s->name, s->inode.vdi_id); | 
|  |  | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | DPRINTF("%s %s\n", sn_info->name, sn_info->id_str); | 
|  |  | 
|  | s->inode.vm_state_size = sn_info->vm_state_size; | 
|  | s->inode.vm_clock_nsec = sn_info->vm_clock_nsec; | 
|  | /* It appears that inode.tag does not require a NUL terminator, | 
|  | * which means this use of strncpy is ok. | 
|  | */ | 
|  | strncpy(s->inode.tag, sn_info->name, sizeof(s->inode.tag)); | 
|  | /* we don't need to update entire object */ | 
|  | datalen = SD_INODE_SIZE - sizeof(s->inode.data_vdi_id); | 
|  | inode = g_malloc(datalen); | 
|  |  | 
|  | /* refresh inode. */ | 
|  | fd = connect_to_sdog(s, &local_err); | 
|  | if (fd < 0) { | 
|  | error_report_err(local_err); | 
|  | ret = fd; | 
|  | goto cleanup; | 
|  | } | 
|  |  | 
|  | ret = write_object(fd, s->aio_context, (char *)&s->inode, | 
|  | vid_to_vdi_oid(s->inode.vdi_id), s->inode.nr_copies, | 
|  | datalen, 0, false, s->cache_flags); | 
|  | if (ret < 0) { | 
|  | error_report("failed to write snapshot's inode."); | 
|  | goto cleanup; | 
|  | } | 
|  |  | 
|  | ret = do_sd_create(s, &new_vid, 1, &local_err); | 
|  | if (ret < 0) { | 
|  | error_report("failed to create inode for snapshot: %s", | 
|  | error_get_pretty(local_err)); | 
|  | error_free(local_err); | 
|  | goto cleanup; | 
|  | } | 
|  |  | 
|  | ret = read_object(fd, s->aio_context, (char *)inode, | 
|  | vid_to_vdi_oid(new_vid), s->inode.nr_copies, datalen, 0, | 
|  | s->cache_flags); | 
|  |  | 
|  | if (ret < 0) { | 
|  | error_report("failed to read new inode info. %s", strerror(errno)); | 
|  | goto cleanup; | 
|  | } | 
|  |  | 
|  | memcpy(&s->inode, inode, datalen); | 
|  | DPRINTF("s->inode: name %s snap_id %x oid %x\n", | 
|  | s->inode.name, s->inode.snap_id, s->inode.vdi_id); | 
|  |  | 
|  | cleanup: | 
|  | g_free(inode); | 
|  | closesocket(fd); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * We implement rollback(loadvm) operation to the specified snapshot by | 
|  | * 1) switch to the snapshot | 
|  | * 2) rely on sd_create_branch to delete working VDI and | 
|  | * 3) create a new working VDI based on the specified snapshot | 
|  | */ | 
|  | static int sd_snapshot_goto(BlockDriverState *bs, const char *snapshot_id) | 
|  | { | 
|  | BDRVSheepdogState *s = bs->opaque; | 
|  | BDRVSheepdogState *old_s; | 
|  | char tag[SD_MAX_VDI_TAG_LEN]; | 
|  | uint32_t snapid = 0; | 
|  | int ret = 0; | 
|  |  | 
|  | old_s = g_new(BDRVSheepdogState, 1); | 
|  |  | 
|  | memcpy(old_s, s, sizeof(BDRVSheepdogState)); | 
|  |  | 
|  | snapid = strtoul(snapshot_id, NULL, 10); | 
|  | if (snapid) { | 
|  | tag[0] = 0; | 
|  | } else { | 
|  | pstrcpy(tag, sizeof(tag), snapshot_id); | 
|  | } | 
|  |  | 
|  | ret = reload_inode(s, snapid, tag); | 
|  | if (ret) { | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | ret = sd_create_branch(s); | 
|  | if (ret) { | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | g_free(old_s); | 
|  |  | 
|  | return 0; | 
|  | out: | 
|  | /* recover bdrv_sd_state */ | 
|  | memcpy(s, old_s, sizeof(BDRVSheepdogState)); | 
|  | g_free(old_s); | 
|  |  | 
|  | error_report("failed to open. recover old bdrv_sd_state."); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int sd_snapshot_delete(BlockDriverState *bs, | 
|  | const char *snapshot_id, | 
|  | const char *name, | 
|  | Error **errp) | 
|  | { | 
|  | /* FIXME: Delete specified snapshot id.  */ | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int sd_snapshot_list(BlockDriverState *bs, QEMUSnapshotInfo **psn_tab) | 
|  | { | 
|  | Error *local_err = NULL; | 
|  | BDRVSheepdogState *s = bs->opaque; | 
|  | SheepdogReq req; | 
|  | int fd, nr = 1024, ret, max = BITS_TO_LONGS(SD_NR_VDIS) * sizeof(long); | 
|  | QEMUSnapshotInfo *sn_tab = NULL; | 
|  | unsigned wlen, rlen; | 
|  | int found = 0; | 
|  | static SheepdogInode inode; | 
|  | unsigned long *vdi_inuse; | 
|  | unsigned int start_nr; | 
|  | uint64_t hval; | 
|  | uint32_t vid; | 
|  |  | 
|  | vdi_inuse = g_malloc(max); | 
|  |  | 
|  | fd = connect_to_sdog(s, &local_err); | 
|  | if (fd < 0) { | 
|  | error_report_err(local_err); | 
|  | ret = fd; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | rlen = max; | 
|  | wlen = 0; | 
|  |  | 
|  | memset(&req, 0, sizeof(req)); | 
|  |  | 
|  | req.opcode = SD_OP_READ_VDIS; | 
|  | req.data_length = max; | 
|  |  | 
|  | ret = do_req(fd, s->aio_context, (SheepdogReq *)&req, | 
|  | vdi_inuse, &wlen, &rlen); | 
|  |  | 
|  | closesocket(fd); | 
|  | if (ret) { | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | sn_tab = g_new0(QEMUSnapshotInfo, nr); | 
|  |  | 
|  | /* calculate a vdi id with hash function */ | 
|  | hval = fnv_64a_buf(s->name, strlen(s->name), FNV1A_64_INIT); | 
|  | start_nr = hval & (SD_NR_VDIS - 1); | 
|  |  | 
|  | fd = connect_to_sdog(s, &local_err); | 
|  | if (fd < 0) { | 
|  | error_report_err(local_err); | 
|  | ret = fd; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | for (vid = start_nr; found < nr; vid = (vid + 1) % SD_NR_VDIS) { | 
|  | if (!test_bit(vid, vdi_inuse)) { | 
|  | break; | 
|  | } | 
|  |  | 
|  | /* we don't need to read entire object */ | 
|  | ret = read_object(fd, s->aio_context, (char *)&inode, | 
|  | vid_to_vdi_oid(vid), | 
|  | 0, SD_INODE_SIZE - sizeof(inode.data_vdi_id), 0, | 
|  | s->cache_flags); | 
|  |  | 
|  | if (ret) { | 
|  | continue; | 
|  | } | 
|  |  | 
|  | if (!strcmp(inode.name, s->name) && is_snapshot(&inode)) { | 
|  | sn_tab[found].date_sec = inode.snap_ctime >> 32; | 
|  | sn_tab[found].date_nsec = inode.snap_ctime & 0xffffffff; | 
|  | sn_tab[found].vm_state_size = inode.vm_state_size; | 
|  | sn_tab[found].vm_clock_nsec = inode.vm_clock_nsec; | 
|  |  | 
|  | snprintf(sn_tab[found].id_str, sizeof(sn_tab[found].id_str), | 
|  | "%" PRIu32, inode.snap_id); | 
|  | pstrcpy(sn_tab[found].name, | 
|  | MIN(sizeof(sn_tab[found].name), sizeof(inode.tag)), | 
|  | inode.tag); | 
|  | found++; | 
|  | } | 
|  | } | 
|  |  | 
|  | closesocket(fd); | 
|  | out: | 
|  | *psn_tab = sn_tab; | 
|  |  | 
|  | g_free(vdi_inuse); | 
|  |  | 
|  | if (ret < 0) { | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | return found; | 
|  | } | 
|  |  | 
|  | static int do_load_save_vmstate(BDRVSheepdogState *s, uint8_t *data, | 
|  | int64_t pos, int size, int load) | 
|  | { | 
|  | Error *local_err = NULL; | 
|  | bool create; | 
|  | int fd, ret = 0, remaining = size; | 
|  | unsigned int data_len; | 
|  | uint64_t vmstate_oid; | 
|  | uint64_t offset; | 
|  | uint32_t vdi_index; | 
|  | uint32_t vdi_id = load ? s->inode.parent_vdi_id : s->inode.vdi_id; | 
|  | uint32_t object_size = (UINT32_C(1) << s->inode.block_size_shift); | 
|  |  | 
|  | fd = connect_to_sdog(s, &local_err); | 
|  | if (fd < 0) { | 
|  | error_report_err(local_err); | 
|  | return fd; | 
|  | } | 
|  |  | 
|  | while (remaining) { | 
|  | vdi_index = pos / object_size; | 
|  | offset = pos % object_size; | 
|  |  | 
|  | data_len = MIN(remaining, object_size - offset); | 
|  |  | 
|  | vmstate_oid = vid_to_vmstate_oid(vdi_id, vdi_index); | 
|  |  | 
|  | create = (offset == 0); | 
|  | if (load) { | 
|  | ret = read_object(fd, s->aio_context, (char *)data, vmstate_oid, | 
|  | s->inode.nr_copies, data_len, offset, | 
|  | s->cache_flags); | 
|  | } else { | 
|  | ret = write_object(fd, s->aio_context, (char *)data, vmstate_oid, | 
|  | s->inode.nr_copies, data_len, offset, create, | 
|  | s->cache_flags); | 
|  | } | 
|  |  | 
|  | if (ret < 0) { | 
|  | error_report("failed to save vmstate %s", strerror(errno)); | 
|  | goto cleanup; | 
|  | } | 
|  |  | 
|  | pos += data_len; | 
|  | data += data_len; | 
|  | remaining -= data_len; | 
|  | } | 
|  | ret = size; | 
|  | cleanup: | 
|  | closesocket(fd); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int sd_save_vmstate(BlockDriverState *bs, QEMUIOVector *qiov, | 
|  | int64_t pos) | 
|  | { | 
|  | BDRVSheepdogState *s = bs->opaque; | 
|  | void *buf; | 
|  | int ret; | 
|  |  | 
|  | buf = qemu_blockalign(bs, qiov->size); | 
|  | qemu_iovec_to_buf(qiov, 0, buf, qiov->size); | 
|  | ret = do_load_save_vmstate(s, (uint8_t *) buf, pos, qiov->size, 0); | 
|  | qemu_vfree(buf); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int sd_load_vmstate(BlockDriverState *bs, uint8_t *data, | 
|  | int64_t pos, int size) | 
|  | { | 
|  | BDRVSheepdogState *s = bs->opaque; | 
|  |  | 
|  | return do_load_save_vmstate(s, data, pos, size, 1); | 
|  | } | 
|  |  | 
|  |  | 
|  | static coroutine_fn int sd_co_discard(BlockDriverState *bs, int64_t sector_num, | 
|  | int nb_sectors) | 
|  | { | 
|  | SheepdogAIOCB *acb; | 
|  | BDRVSheepdogState *s = bs->opaque; | 
|  | int ret; | 
|  | QEMUIOVector discard_iov; | 
|  | struct iovec iov; | 
|  | uint32_t zero = 0; | 
|  |  | 
|  | if (!s->discard_supported) { | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | memset(&discard_iov, 0, sizeof(discard_iov)); | 
|  | memset(&iov, 0, sizeof(iov)); | 
|  | iov.iov_base = &zero; | 
|  | iov.iov_len = sizeof(zero); | 
|  | discard_iov.iov = &iov; | 
|  | discard_iov.niov = 1; | 
|  | acb = sd_aio_setup(bs, &discard_iov, sector_num, nb_sectors); | 
|  | acb->aiocb_type = AIOCB_DISCARD_OBJ; | 
|  | acb->aio_done_func = sd_finish_aiocb; | 
|  |  | 
|  | retry: | 
|  | if (check_overlapping_aiocb(s, acb)) { | 
|  | qemu_co_queue_wait(&s->overlapping_queue); | 
|  | goto retry; | 
|  | } | 
|  |  | 
|  | ret = sd_co_rw_vector(acb); | 
|  | if (ret <= 0) { | 
|  | QLIST_REMOVE(acb, aiocb_siblings); | 
|  | qemu_co_queue_restart_all(&s->overlapping_queue); | 
|  | qemu_aio_unref(acb); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | qemu_coroutine_yield(); | 
|  |  | 
|  | QLIST_REMOVE(acb, aiocb_siblings); | 
|  | qemu_co_queue_restart_all(&s->overlapping_queue); | 
|  |  | 
|  | return acb->ret; | 
|  | } | 
|  |  | 
|  | static coroutine_fn int64_t | 
|  | sd_co_get_block_status(BlockDriverState *bs, int64_t sector_num, int nb_sectors, | 
|  | int *pnum) | 
|  | { | 
|  | BDRVSheepdogState *s = bs->opaque; | 
|  | SheepdogInode *inode = &s->inode; | 
|  | uint32_t object_size = (UINT32_C(1) << inode->block_size_shift); | 
|  | uint64_t offset = sector_num * BDRV_SECTOR_SIZE; | 
|  | unsigned long start = offset / object_size, | 
|  | end = DIV_ROUND_UP((sector_num + nb_sectors) * | 
|  | BDRV_SECTOR_SIZE, object_size); | 
|  | unsigned long idx; | 
|  | int64_t ret = BDRV_BLOCK_DATA | BDRV_BLOCK_OFFSET_VALID | offset; | 
|  |  | 
|  | for (idx = start; idx < end; idx++) { | 
|  | if (inode->data_vdi_id[idx] == 0) { | 
|  | break; | 
|  | } | 
|  | } | 
|  | if (idx == start) { | 
|  | /* Get the longest length of unallocated sectors */ | 
|  | ret = 0; | 
|  | for (idx = start + 1; idx < end; idx++) { | 
|  | if (inode->data_vdi_id[idx] != 0) { | 
|  | break; | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | *pnum = (idx - start) * object_size / BDRV_SECTOR_SIZE; | 
|  | if (*pnum > nb_sectors) { | 
|  | *pnum = nb_sectors; | 
|  | } | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int64_t sd_get_allocated_file_size(BlockDriverState *bs) | 
|  | { | 
|  | BDRVSheepdogState *s = bs->opaque; | 
|  | SheepdogInode *inode = &s->inode; | 
|  | uint32_t object_size = (UINT32_C(1) << inode->block_size_shift); | 
|  | unsigned long i, last = DIV_ROUND_UP(inode->vdi_size, object_size); | 
|  | uint64_t size = 0; | 
|  |  | 
|  | for (i = 0; i < last; i++) { | 
|  | if (inode->data_vdi_id[i] == 0) { | 
|  | continue; | 
|  | } | 
|  | size += object_size; | 
|  | } | 
|  | return size; | 
|  | } | 
|  |  | 
|  | static QemuOptsList sd_create_opts = { | 
|  | .name = "sheepdog-create-opts", | 
|  | .head = QTAILQ_HEAD_INITIALIZER(sd_create_opts.head), | 
|  | .desc = { | 
|  | { | 
|  | .name = BLOCK_OPT_SIZE, | 
|  | .type = QEMU_OPT_SIZE, | 
|  | .help = "Virtual disk size" | 
|  | }, | 
|  | { | 
|  | .name = BLOCK_OPT_BACKING_FILE, | 
|  | .type = QEMU_OPT_STRING, | 
|  | .help = "File name of a base image" | 
|  | }, | 
|  | { | 
|  | .name = BLOCK_OPT_PREALLOC, | 
|  | .type = QEMU_OPT_STRING, | 
|  | .help = "Preallocation mode (allowed values: off, full)" | 
|  | }, | 
|  | { | 
|  | .name = BLOCK_OPT_REDUNDANCY, | 
|  | .type = QEMU_OPT_STRING, | 
|  | .help = "Redundancy of the image" | 
|  | }, | 
|  | { | 
|  | .name = BLOCK_OPT_OBJECT_SIZE, | 
|  | .type = QEMU_OPT_SIZE, | 
|  | .help = "Object size of the image" | 
|  | }, | 
|  | { /* end of list */ } | 
|  | } | 
|  | }; | 
|  |  | 
|  | static BlockDriver bdrv_sheepdog = { | 
|  | .format_name    = "sheepdog", | 
|  | .protocol_name  = "sheepdog", | 
|  | .instance_size  = sizeof(BDRVSheepdogState), | 
|  | .bdrv_needs_filename = true, | 
|  | .bdrv_file_open = sd_open, | 
|  | .bdrv_reopen_prepare    = sd_reopen_prepare, | 
|  | .bdrv_reopen_commit     = sd_reopen_commit, | 
|  | .bdrv_reopen_abort      = sd_reopen_abort, | 
|  | .bdrv_close     = sd_close, | 
|  | .bdrv_create    = sd_create, | 
|  | .bdrv_has_zero_init = bdrv_has_zero_init_1, | 
|  | .bdrv_getlength = sd_getlength, | 
|  | .bdrv_get_allocated_file_size = sd_get_allocated_file_size, | 
|  | .bdrv_truncate  = sd_truncate, | 
|  |  | 
|  | .bdrv_co_readv  = sd_co_readv, | 
|  | .bdrv_co_writev = sd_co_writev, | 
|  | .bdrv_co_flush_to_disk  = sd_co_flush_to_disk, | 
|  | .bdrv_co_discard = sd_co_discard, | 
|  | .bdrv_co_get_block_status = sd_co_get_block_status, | 
|  |  | 
|  | .bdrv_snapshot_create   = sd_snapshot_create, | 
|  | .bdrv_snapshot_goto     = sd_snapshot_goto, | 
|  | .bdrv_snapshot_delete   = sd_snapshot_delete, | 
|  | .bdrv_snapshot_list     = sd_snapshot_list, | 
|  |  | 
|  | .bdrv_save_vmstate  = sd_save_vmstate, | 
|  | .bdrv_load_vmstate  = sd_load_vmstate, | 
|  |  | 
|  | .bdrv_detach_aio_context = sd_detach_aio_context, | 
|  | .bdrv_attach_aio_context = sd_attach_aio_context, | 
|  |  | 
|  | .create_opts    = &sd_create_opts, | 
|  | }; | 
|  |  | 
|  | static BlockDriver bdrv_sheepdog_tcp = { | 
|  | .format_name    = "sheepdog", | 
|  | .protocol_name  = "sheepdog+tcp", | 
|  | .instance_size  = sizeof(BDRVSheepdogState), | 
|  | .bdrv_needs_filename = true, | 
|  | .bdrv_file_open = sd_open, | 
|  | .bdrv_reopen_prepare    = sd_reopen_prepare, | 
|  | .bdrv_reopen_commit     = sd_reopen_commit, | 
|  | .bdrv_reopen_abort      = sd_reopen_abort, | 
|  | .bdrv_close     = sd_close, | 
|  | .bdrv_create    = sd_create, | 
|  | .bdrv_has_zero_init = bdrv_has_zero_init_1, | 
|  | .bdrv_getlength = sd_getlength, | 
|  | .bdrv_get_allocated_file_size = sd_get_allocated_file_size, | 
|  | .bdrv_truncate  = sd_truncate, | 
|  |  | 
|  | .bdrv_co_readv  = sd_co_readv, | 
|  | .bdrv_co_writev = sd_co_writev, | 
|  | .bdrv_co_flush_to_disk  = sd_co_flush_to_disk, | 
|  | .bdrv_co_discard = sd_co_discard, | 
|  | .bdrv_co_get_block_status = sd_co_get_block_status, | 
|  |  | 
|  | .bdrv_snapshot_create   = sd_snapshot_create, | 
|  | .bdrv_snapshot_goto     = sd_snapshot_goto, | 
|  | .bdrv_snapshot_delete   = sd_snapshot_delete, | 
|  | .bdrv_snapshot_list     = sd_snapshot_list, | 
|  |  | 
|  | .bdrv_save_vmstate  = sd_save_vmstate, | 
|  | .bdrv_load_vmstate  = sd_load_vmstate, | 
|  |  | 
|  | .bdrv_detach_aio_context = sd_detach_aio_context, | 
|  | .bdrv_attach_aio_context = sd_attach_aio_context, | 
|  |  | 
|  | .create_opts    = &sd_create_opts, | 
|  | }; | 
|  |  | 
|  | static BlockDriver bdrv_sheepdog_unix = { | 
|  | .format_name    = "sheepdog", | 
|  | .protocol_name  = "sheepdog+unix", | 
|  | .instance_size  = sizeof(BDRVSheepdogState), | 
|  | .bdrv_needs_filename = true, | 
|  | .bdrv_file_open = sd_open, | 
|  | .bdrv_reopen_prepare    = sd_reopen_prepare, | 
|  | .bdrv_reopen_commit     = sd_reopen_commit, | 
|  | .bdrv_reopen_abort      = sd_reopen_abort, | 
|  | .bdrv_close     = sd_close, | 
|  | .bdrv_create    = sd_create, | 
|  | .bdrv_has_zero_init = bdrv_has_zero_init_1, | 
|  | .bdrv_getlength = sd_getlength, | 
|  | .bdrv_get_allocated_file_size = sd_get_allocated_file_size, | 
|  | .bdrv_truncate  = sd_truncate, | 
|  |  | 
|  | .bdrv_co_readv  = sd_co_readv, | 
|  | .bdrv_co_writev = sd_co_writev, | 
|  | .bdrv_co_flush_to_disk  = sd_co_flush_to_disk, | 
|  | .bdrv_co_discard = sd_co_discard, | 
|  | .bdrv_co_get_block_status = sd_co_get_block_status, | 
|  |  | 
|  | .bdrv_snapshot_create   = sd_snapshot_create, | 
|  | .bdrv_snapshot_goto     = sd_snapshot_goto, | 
|  | .bdrv_snapshot_delete   = sd_snapshot_delete, | 
|  | .bdrv_snapshot_list     = sd_snapshot_list, | 
|  |  | 
|  | .bdrv_save_vmstate  = sd_save_vmstate, | 
|  | .bdrv_load_vmstate  = sd_load_vmstate, | 
|  |  | 
|  | .bdrv_detach_aio_context = sd_detach_aio_context, | 
|  | .bdrv_attach_aio_context = sd_attach_aio_context, | 
|  |  | 
|  | .create_opts    = &sd_create_opts, | 
|  | }; | 
|  |  | 
|  | static void bdrv_sheepdog_init(void) | 
|  | { | 
|  | bdrv_register(&bdrv_sheepdog); | 
|  | bdrv_register(&bdrv_sheepdog_tcp); | 
|  | bdrv_register(&bdrv_sheepdog_unix); | 
|  | } | 
|  | block_init(bdrv_sheepdog_init); |