| QEMU CCID Device Documentation. |
| |
| Contents |
| 1. USB CCID device |
| 2. Building |
| 3. Using ccid-card-emulated with hardware |
| 4. Using ccid-card-emulated with certificates |
| 5. Using ccid-card-passthru with client side hardware |
| 6. Using ccid-card-passthru with client side certificates |
| 7. Passthrough protocol scenario |
| 8. libcacard |
| |
| 1. USB CCID device |
| |
| The USB CCID device is a USB device implementing the CCID specification, which |
| lets one connect smart card readers that implement the same spec. For more |
| information see the specification: |
| |
| Universal Serial Bus |
| Device Class: Smart Card |
| CCID |
| Specification for |
| Integrated Circuit(s) Cards Interface Devices |
| Revision 1.1 |
| April 22rd, 2005 |
| |
| Smartcards are used for authentication, single sign on, decryption in |
| public/private schemes and digital signatures. A smartcard reader on the client |
| cannot be used on a guest with simple usb passthrough since it will then not be |
| available on the client, possibly locking the computer when it is "removed". On |
| the other hand this device can let you use the smartcard on both the client and |
| the guest machine. It is also possible to have a completely virtual smart card |
| reader and smart card (i.e. not backed by a physical device) using this device. |
| |
| 2. Building |
| |
| The cryptographic functions and access to the physical card is done via NSS. |
| |
| Installing NSS: |
| |
| In redhat/fedora: |
| yum install nss-devel |
| In ubuntu/debian: |
| apt-get install libnss3-dev |
| (not tested on ubuntu) |
| |
| Configuring and building: |
| ./configure --enable-smartcard && make |
| |
| |
| 3. Using ccid-card-emulated with hardware |
| |
| Assuming you have a working smartcard on the host with the current |
| user, using NSS, qemu acts as another NSS client using ccid-card-emulated: |
| |
| qemu -usb -device usb-ccid -device ccid-card-emulated |
| |
| |
| 4. Using ccid-card-emulated with certificates stored in files |
| |
| You must create the CA and card certificates. This is a one time process. |
| We use NSS certificates: |
| |
| mkdir fake-smartcard |
| cd fake-smartcard |
| certutil -N -d sql:$PWD |
| certutil -S -d sql:$PWD -s "CN=Fake Smart Card CA" -x -t TC,TC,TC -n fake-smartcard-ca |
| certutil -S -d sql:$PWD -t ,, -s "CN=John Doe" -n id-cert -c fake-smartcard-ca |
| certutil -S -d sql:$PWD -t ,, -s "CN=John Doe (signing)" --nsCertType smime -n signing-cert -c fake-smartcard-ca |
| certutil -S -d sql:$PWD -t ,, -s "CN=John Doe (encryption)" --nsCertType sslClient -n encryption-cert -c fake-smartcard-ca |
| |
| Note: you must have exactly three certificates. |
| |
| You can use the emulated card type with the certificates backend: |
| |
| qemu -usb -device usb-ccid -device ccid-card-emulated,backend=certificates,db=sql:$PWD,cert1=id-cert,cert2=signing-cert,cert3=encryption-cert |
| |
| To use the certificates in the guest, export the CA certificate: |
| |
| certutil -L -r -d sql:$PWD -o fake-smartcard-ca.cer -n fake-smartcard-ca |
| |
| and import it in the guest: |
| |
| certutil -A -d /etc/pki/nssdb -i fake-smartcard-ca.cer -t TC,TC,TC -n fake-smartcard-ca |
| |
| In a Linux guest you can then use the CoolKey PKCS #11 module to access |
| the card: |
| |
| certutil -d /etc/pki/nssdb -L -h all |
| |
| It will prompt you for the PIN (which is the password you assigned to the |
| certificate database early on), and then show you all three certificates |
| together with the manually imported CA cert: |
| |
| Certificate Nickname Trust Attributes |
| fake-smartcard-ca CT,C,C |
| John Doe:CAC ID Certificate u,u,u |
| John Doe:CAC Email Signature Certificate u,u,u |
| John Doe:CAC Email Encryption Certificate u,u,u |
| |
| If this does not happen, CoolKey is not installed or not registered with |
| NSS. Registration can be done from Firefox or the command line: |
| |
| modutil -dbdir /etc/pki/nssdb -add "CAC Module" -libfile /usr/lib64/pkcs11/libcoolkeypk11.so |
| modutil -dbdir /etc/pki/nssdb -list |
| |
| |
| 5. Using ccid-card-passthru with client side hardware |
| |
| on the host specify the ccid-card-passthru device with a suitable chardev: |
| |
| qemu -chardev socket,server,host=0.0.0.0,port=2001,id=ccid,nowait -usb -device usb-ccid -device ccid-card-passthru,chardev=ccid |
| |
| on the client run vscclient, built when you built QEMU: |
| |
| vscclient <qemu-host> 2001 |
| |
| |
| 6. Using ccid-card-passthru with client side certificates |
| |
| This case is not particularly useful, but you can use it to debug |
| your setup if #4 works but #5 does not. |
| |
| Follow instructions as per #4, except run QEMU and vscclient as follows: |
| Run qemu as per #5, and run vscclient from the "fake-smartcard" |
| directory as follows: |
| |
| qemu -chardev socket,server,host=0.0.0.0,port=2001,id=ccid,nowait -usb -device usb-ccid -device ccid-card-passthru,chardev=ccid |
| vscclient -e "db=\"sql:$PWD\" use_hw=no soft=(,Test,CAC,,id-cert,signing-cert,encryption-cert)" <qemu-host> 2001 |
| |
| |
| 7. Passthrough protocol scenario |
| |
| This is a typical interchange of messages when using the passthru card device. |
| usb-ccid is a usb device. It defaults to an unattached usb device on startup. |
| usb-ccid expects a chardev and expects the protocol defined in |
| cac_card/vscard_common.h to be passed over that. |
| The usb-ccid device can be in one of three modes: |
| * detached |
| * attached with no card |
| * attached with card |
| |
| A typical interchange is: (the arrow shows who started each exchange, it can be client |
| originated or guest originated) |
| |
| client event | vscclient | passthru | usb-ccid | guest event |
| ---------------------------------------------------------------------------------------------- |
| | VSC_Init | | | |
| | VSC_ReaderAdd | | attach | |
| | | | | sees new usb device. |
| card inserted -> | | | | |
| | VSC_ATR | insert | insert | see new card |
| | | | | |
| | VSC_APDU | VSC_APDU | | <- guest sends APDU |
| client<->physical | | | | |
| card APDU exchange| | | | |
| client response ->| VSC_APDU | VSC_APDU | | receive APDU response |
| ... |
| [APDU<->APDU repeats several times] |
| ... |
| card removed -> | | | | |
| | VSC_CardRemove | remove | remove | card removed |
| ... |
| [(card insert, apdu's, card remove) repeat] |
| ... |
| kill/quit | | | | |
| vscclient | | | | |
| | VSC_ReaderRemove | | detach | |
| | | | | usb device removed. |
| |
| |
| 8. libcacard |
| |
| Both ccid-card-emulated and vscclient use libcacard as the card emulator. |
| libcacard implements a completely virtual CAC (DoD standard for smart |
| cards) compliant card and uses NSS to retrieve certificates and do |
| any encryption. The backend can then be a real reader and card, or |
| certificates stored in files. |
| |
| For documentation of the library see docs/libcacard.txt. |
| |