| /* | 
 |  * ACPI implementation | 
 |  * | 
 |  * Copyright (c) 2006 Fabrice Bellard | 
 |  * | 
 |  * This library is free software; you can redistribute it and/or | 
 |  * modify it under the terms of the GNU Lesser General Public | 
 |  * License version 2 as published by the Free Software Foundation. | 
 |  * | 
 |  * This library is distributed in the hope that it will be useful, | 
 |  * but WITHOUT ANY WARRANTY; without even the implied warranty of | 
 |  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU | 
 |  * Lesser General Public License for more details. | 
 |  * | 
 |  * You should have received a copy of the GNU Lesser General Public | 
 |  * License along with this library; if not, see <http://www.gnu.org/licenses/> | 
 |  * | 
 |  * Contributions after 2012-01-13 are licensed under the terms of the | 
 |  * GNU GPL, version 2 or (at your option) any later version. | 
 |  */ | 
 | #include "hw/hw.h" | 
 | #include "hw/i386/pc.h" | 
 | #include "hw/isa/apm.h" | 
 | #include "hw/i2c/pm_smbus.h" | 
 | #include "hw/pci/pci.h" | 
 | #include "hw/acpi/acpi.h" | 
 | #include "sysemu/sysemu.h" | 
 | #include "qemu/range.h" | 
 | #include "exec/ioport.h" | 
 | #include "hw/nvram/fw_cfg.h" | 
 | #include "exec/address-spaces.h" | 
 |  | 
 | //#define DEBUG | 
 |  | 
 | #ifdef DEBUG | 
 | # define PIIX4_DPRINTF(format, ...)     printf(format, ## __VA_ARGS__) | 
 | #else | 
 | # define PIIX4_DPRINTF(format, ...)     do { } while (0) | 
 | #endif | 
 |  | 
 | #define GPE_BASE 0xafe0 | 
 | #define GPE_LEN 4 | 
 |  | 
 | #define PCI_HOTPLUG_ADDR 0xae00 | 
 | #define PCI_HOTPLUG_SIZE 0x000f | 
 | #define PCI_UP_BASE 0xae00 | 
 | #define PCI_DOWN_BASE 0xae04 | 
 | #define PCI_EJ_BASE 0xae08 | 
 | #define PCI_RMV_BASE 0xae0c | 
 |  | 
 | #define PIIX4_PROC_BASE 0xaf00 | 
 | #define PIIX4_PROC_LEN 32 | 
 |  | 
 | #define PIIX4_PCI_HOTPLUG_STATUS 2 | 
 | #define PIIX4_CPU_HOTPLUG_STATUS 4 | 
 |  | 
 | struct pci_status { | 
 |     uint32_t up; /* deprecated, maintained for migration compatibility */ | 
 |     uint32_t down; | 
 | }; | 
 |  | 
 | typedef struct CPUStatus { | 
 |     uint8_t sts[PIIX4_PROC_LEN]; | 
 | } CPUStatus; | 
 |  | 
 | typedef struct PIIX4PMState { | 
 |     /*< private >*/ | 
 |     PCIDevice parent_obj; | 
 |     /*< public >*/ | 
 |  | 
 |     MemoryRegion io; | 
 |     MemoryRegion io_gpe; | 
 |     MemoryRegion io_pci; | 
 |     MemoryRegion io_cpu; | 
 |     ACPIREGS ar; | 
 |  | 
 |     APMState apm; | 
 |  | 
 |     PMSMBus smb; | 
 |     uint32_t smb_io_base; | 
 |  | 
 |     qemu_irq irq; | 
 |     qemu_irq smi_irq; | 
 |     int kvm_enabled; | 
 |     Notifier machine_ready; | 
 |     Notifier powerdown_notifier; | 
 |  | 
 |     /* for pci hotplug */ | 
 |     struct pci_status pci0_status; | 
 |     uint32_t pci0_hotplug_enable; | 
 |     uint32_t pci0_slot_device_present; | 
 |  | 
 |     uint8_t disable_s3; | 
 |     uint8_t disable_s4; | 
 |     uint8_t s4_val; | 
 |  | 
 |     CPUStatus gpe_cpu; | 
 |     Notifier cpu_added_notifier; | 
 | } PIIX4PMState; | 
 |  | 
 | #define TYPE_PIIX4_PM "PIIX4_PM" | 
 |  | 
 | #define PIIX4_PM(obj) \ | 
 |     OBJECT_CHECK(PIIX4PMState, (obj), TYPE_PIIX4_PM) | 
 |  | 
 | static void piix4_acpi_system_hot_add_init(MemoryRegion *parent, | 
 |                                            PCIBus *bus, PIIX4PMState *s); | 
 |  | 
 | #define ACPI_ENABLE 0xf1 | 
 | #define ACPI_DISABLE 0xf0 | 
 |  | 
 | static void pm_update_sci(PIIX4PMState *s) | 
 | { | 
 |     int sci_level, pmsts; | 
 |  | 
 |     pmsts = acpi_pm1_evt_get_sts(&s->ar); | 
 |     sci_level = (((pmsts & s->ar.pm1.evt.en) & | 
 |                   (ACPI_BITMASK_RT_CLOCK_ENABLE | | 
 |                    ACPI_BITMASK_POWER_BUTTON_ENABLE | | 
 |                    ACPI_BITMASK_GLOBAL_LOCK_ENABLE | | 
 |                    ACPI_BITMASK_TIMER_ENABLE)) != 0) || | 
 |         (((s->ar.gpe.sts[0] & s->ar.gpe.en[0]) & | 
 |           (PIIX4_PCI_HOTPLUG_STATUS | PIIX4_CPU_HOTPLUG_STATUS)) != 0); | 
 |  | 
 |     qemu_set_irq(s->irq, sci_level); | 
 |     /* schedule a timer interruption if needed */ | 
 |     acpi_pm_tmr_update(&s->ar, (s->ar.pm1.evt.en & ACPI_BITMASK_TIMER_ENABLE) && | 
 |                        !(pmsts & ACPI_BITMASK_TIMER_STATUS)); | 
 | } | 
 |  | 
 | static void pm_tmr_timer(ACPIREGS *ar) | 
 | { | 
 |     PIIX4PMState *s = container_of(ar, PIIX4PMState, ar); | 
 |     pm_update_sci(s); | 
 | } | 
 |  | 
 | static void apm_ctrl_changed(uint32_t val, void *arg) | 
 | { | 
 |     PIIX4PMState *s = arg; | 
 |     PCIDevice *d = PCI_DEVICE(s); | 
 |  | 
 |     /* ACPI specs 3.0, 4.7.2.5 */ | 
 |     acpi_pm1_cnt_update(&s->ar, val == ACPI_ENABLE, val == ACPI_DISABLE); | 
 |  | 
 |     if (d->config[0x5b] & (1 << 1)) { | 
 |         if (s->smi_irq) { | 
 |             qemu_irq_raise(s->smi_irq); | 
 |         } | 
 |     } | 
 | } | 
 |  | 
 | static void pm_io_space_update(PIIX4PMState *s) | 
 | { | 
 |     PCIDevice *d = PCI_DEVICE(s); | 
 |     uint32_t pm_io_base; | 
 |  | 
 |     pm_io_base = le32_to_cpu(*(uint32_t *)(d->config + 0x40)); | 
 |     pm_io_base &= 0xffc0; | 
 |  | 
 |     memory_region_transaction_begin(); | 
 |     memory_region_set_enabled(&s->io, d->config[0x80] & 1); | 
 |     memory_region_set_address(&s->io, pm_io_base); | 
 |     memory_region_transaction_commit(); | 
 | } | 
 |  | 
 | static void smbus_io_space_update(PIIX4PMState *s) | 
 | { | 
 |     PCIDevice *d = PCI_DEVICE(s); | 
 |  | 
 |     s->smb_io_base = le32_to_cpu(*(uint32_t *)(d->config + 0x90)); | 
 |     s->smb_io_base &= 0xffc0; | 
 |  | 
 |     memory_region_transaction_begin(); | 
 |     memory_region_set_enabled(&s->smb.io, d->config[0xd2] & 1); | 
 |     memory_region_set_address(&s->smb.io, s->smb_io_base); | 
 |     memory_region_transaction_commit(); | 
 | } | 
 |  | 
 | static void pm_write_config(PCIDevice *d, | 
 |                             uint32_t address, uint32_t val, int len) | 
 | { | 
 |     pci_default_write_config(d, address, val, len); | 
 |     if (range_covers_byte(address, len, 0x80) || | 
 |         ranges_overlap(address, len, 0x40, 4)) { | 
 |         pm_io_space_update((PIIX4PMState *)d); | 
 |     } | 
 |     if (range_covers_byte(address, len, 0xd2) || | 
 |         ranges_overlap(address, len, 0x90, 4)) { | 
 |         smbus_io_space_update((PIIX4PMState *)d); | 
 |     } | 
 | } | 
 |  | 
 | static void vmstate_pci_status_pre_save(void *opaque) | 
 | { | 
 |     struct pci_status *pci0_status = opaque; | 
 |     PIIX4PMState *s = container_of(pci0_status, PIIX4PMState, pci0_status); | 
 |  | 
 |     /* We no longer track up, so build a safe value for migrating | 
 |      * to a version that still does... of course these might get lost | 
 |      * by an old buggy implementation, but we try. */ | 
 |     pci0_status->up = s->pci0_slot_device_present & s->pci0_hotplug_enable; | 
 | } | 
 |  | 
 | static int vmstate_acpi_post_load(void *opaque, int version_id) | 
 | { | 
 |     PIIX4PMState *s = opaque; | 
 |  | 
 |     pm_io_space_update(s); | 
 |     return 0; | 
 | } | 
 |  | 
 | #define VMSTATE_GPE_ARRAY(_field, _state)                            \ | 
 |  {                                                                   \ | 
 |      .name       = (stringify(_field)),                              \ | 
 |      .version_id = 0,                                                \ | 
 |      .info       = &vmstate_info_uint16,                             \ | 
 |      .size       = sizeof(uint16_t),                                 \ | 
 |      .flags      = VMS_SINGLE | VMS_POINTER,                         \ | 
 |      .offset     = vmstate_offset_pointer(_state, _field, uint8_t),  \ | 
 |  } | 
 |  | 
 | static const VMStateDescription vmstate_gpe = { | 
 |     .name = "gpe", | 
 |     .version_id = 1, | 
 |     .minimum_version_id = 1, | 
 |     .minimum_version_id_old = 1, | 
 |     .fields      = (VMStateField []) { | 
 |         VMSTATE_GPE_ARRAY(sts, ACPIGPE), | 
 |         VMSTATE_GPE_ARRAY(en, ACPIGPE), | 
 |         VMSTATE_END_OF_LIST() | 
 |     } | 
 | }; | 
 |  | 
 | static const VMStateDescription vmstate_pci_status = { | 
 |     .name = "pci_status", | 
 |     .version_id = 1, | 
 |     .minimum_version_id = 1, | 
 |     .minimum_version_id_old = 1, | 
 |     .pre_save = vmstate_pci_status_pre_save, | 
 |     .fields      = (VMStateField []) { | 
 |         VMSTATE_UINT32(up, struct pci_status), | 
 |         VMSTATE_UINT32(down, struct pci_status), | 
 |         VMSTATE_END_OF_LIST() | 
 |     } | 
 | }; | 
 |  | 
 | static int acpi_load_old(QEMUFile *f, void *opaque, int version_id) | 
 | { | 
 |     PIIX4PMState *s = opaque; | 
 |     int ret, i; | 
 |     uint16_t temp; | 
 |  | 
 |     ret = pci_device_load(PCI_DEVICE(s), f); | 
 |     if (ret < 0) { | 
 |         return ret; | 
 |     } | 
 |     qemu_get_be16s(f, &s->ar.pm1.evt.sts); | 
 |     qemu_get_be16s(f, &s->ar.pm1.evt.en); | 
 |     qemu_get_be16s(f, &s->ar.pm1.cnt.cnt); | 
 |  | 
 |     ret = vmstate_load_state(f, &vmstate_apm, &s->apm, 1); | 
 |     if (ret) { | 
 |         return ret; | 
 |     } | 
 |  | 
 |     qemu_get_timer(f, s->ar.tmr.timer); | 
 |     qemu_get_sbe64s(f, &s->ar.tmr.overflow_time); | 
 |  | 
 |     qemu_get_be16s(f, (uint16_t *)s->ar.gpe.sts); | 
 |     for (i = 0; i < 3; i++) { | 
 |         qemu_get_be16s(f, &temp); | 
 |     } | 
 |  | 
 |     qemu_get_be16s(f, (uint16_t *)s->ar.gpe.en); | 
 |     for (i = 0; i < 3; i++) { | 
 |         qemu_get_be16s(f, &temp); | 
 |     } | 
 |  | 
 |     ret = vmstate_load_state(f, &vmstate_pci_status, &s->pci0_status, 1); | 
 |     return ret; | 
 | } | 
 |  | 
 | /* qemu-kvm 1.2 uses version 3 but advertised as 2 | 
 |  * To support incoming qemu-kvm 1.2 migration, change version_id | 
 |  * and minimum_version_id to 2 below (which breaks migration from | 
 |  * qemu 1.2). | 
 |  * | 
 |  */ | 
 | static const VMStateDescription vmstate_acpi = { | 
 |     .name = "piix4_pm", | 
 |     .version_id = 3, | 
 |     .minimum_version_id = 3, | 
 |     .minimum_version_id_old = 1, | 
 |     .load_state_old = acpi_load_old, | 
 |     .post_load = vmstate_acpi_post_load, | 
 |     .fields      = (VMStateField []) { | 
 |         VMSTATE_PCI_DEVICE(parent_obj, PIIX4PMState), | 
 |         VMSTATE_UINT16(ar.pm1.evt.sts, PIIX4PMState), | 
 |         VMSTATE_UINT16(ar.pm1.evt.en, PIIX4PMState), | 
 |         VMSTATE_UINT16(ar.pm1.cnt.cnt, PIIX4PMState), | 
 |         VMSTATE_STRUCT(apm, PIIX4PMState, 0, vmstate_apm, APMState), | 
 |         VMSTATE_TIMER(ar.tmr.timer, PIIX4PMState), | 
 |         VMSTATE_INT64(ar.tmr.overflow_time, PIIX4PMState), | 
 |         VMSTATE_STRUCT(ar.gpe, PIIX4PMState, 2, vmstate_gpe, ACPIGPE), | 
 |         VMSTATE_STRUCT(pci0_status, PIIX4PMState, 2, vmstate_pci_status, | 
 |                        struct pci_status), | 
 |         VMSTATE_END_OF_LIST() | 
 |     } | 
 | }; | 
 |  | 
 | static void acpi_piix_eject_slot(PIIX4PMState *s, unsigned slots) | 
 | { | 
 |     BusChild *kid, *next; | 
 |     BusState *bus = qdev_get_parent_bus(DEVICE(s)); | 
 |     int slot = ffs(slots) - 1; | 
 |     bool slot_free = true; | 
 |  | 
 |     /* Mark request as complete */ | 
 |     s->pci0_status.down &= ~(1U << slot); | 
 |  | 
 |     QTAILQ_FOREACH_SAFE(kid, &bus->children, sibling, next) { | 
 |         DeviceState *qdev = kid->child; | 
 |         PCIDevice *dev = PCI_DEVICE(qdev); | 
 |         PCIDeviceClass *pc = PCI_DEVICE_GET_CLASS(dev); | 
 |         if (PCI_SLOT(dev->devfn) == slot) { | 
 |             if (pc->no_hotplug) { | 
 |                 slot_free = false; | 
 |             } else { | 
 |                 qdev_free(qdev); | 
 |             } | 
 |         } | 
 |     } | 
 |     if (slot_free) { | 
 |         s->pci0_slot_device_present &= ~(1U << slot); | 
 |     } | 
 | } | 
 |  | 
 | static void piix4_update_hotplug(PIIX4PMState *s) | 
 | { | 
 |     BusState *bus = qdev_get_parent_bus(DEVICE(s)); | 
 |     BusChild *kid, *next; | 
 |  | 
 |     /* Execute any pending removes during reset */ | 
 |     while (s->pci0_status.down) { | 
 |         acpi_piix_eject_slot(s, s->pci0_status.down); | 
 |     } | 
 |  | 
 |     s->pci0_hotplug_enable = ~0; | 
 |     s->pci0_slot_device_present = 0; | 
 |  | 
 |     QTAILQ_FOREACH_SAFE(kid, &bus->children, sibling, next) { | 
 |         DeviceState *qdev = kid->child; | 
 |         PCIDevice *pdev = PCI_DEVICE(qdev); | 
 |         PCIDeviceClass *pc = PCI_DEVICE_GET_CLASS(pdev); | 
 |         int slot = PCI_SLOT(pdev->devfn); | 
 |  | 
 |         if (pc->no_hotplug) { | 
 |             s->pci0_hotplug_enable &= ~(1U << slot); | 
 |         } | 
 |  | 
 |         s->pci0_slot_device_present |= (1U << slot); | 
 |     } | 
 | } | 
 |  | 
 | static void piix4_reset(void *opaque) | 
 | { | 
 |     PIIX4PMState *s = opaque; | 
 |     PCIDevice *d = PCI_DEVICE(s); | 
 |     uint8_t *pci_conf = d->config; | 
 |  | 
 |     pci_conf[0x58] = 0; | 
 |     pci_conf[0x59] = 0; | 
 |     pci_conf[0x5a] = 0; | 
 |     pci_conf[0x5b] = 0; | 
 |  | 
 |     pci_conf[0x40] = 0x01; /* PM io base read only bit */ | 
 |     pci_conf[0x80] = 0; | 
 |  | 
 |     if (s->kvm_enabled) { | 
 |         /* Mark SMM as already inited (until KVM supports SMM). */ | 
 |         pci_conf[0x5B] = 0x02; | 
 |     } | 
 |     piix4_update_hotplug(s); | 
 | } | 
 |  | 
 | static void piix4_pm_powerdown_req(Notifier *n, void *opaque) | 
 | { | 
 |     PIIX4PMState *s = container_of(n, PIIX4PMState, powerdown_notifier); | 
 |  | 
 |     assert(s != NULL); | 
 |     acpi_pm1_evt_power_down(&s->ar); | 
 | } | 
 |  | 
 | static void piix4_pm_machine_ready(Notifier *n, void *opaque) | 
 | { | 
 |     PIIX4PMState *s = container_of(n, PIIX4PMState, machine_ready); | 
 |     PCIDevice *d = PCI_DEVICE(s); | 
 |     MemoryRegion *io_as = pci_address_space_io(d); | 
 |     uint8_t *pci_conf; | 
 |  | 
 |     pci_conf = d->config; | 
 |     pci_conf[0x5f] = 0x10 | | 
 |         (memory_region_present(io_as, 0x378) ? 0x80 : 0); | 
 |     pci_conf[0x63] = 0x60; | 
 |     pci_conf[0x67] = (memory_region_present(io_as, 0x3f8) ? 0x08 : 0) | | 
 |         (memory_region_present(io_as, 0x2f8) ? 0x90 : 0); | 
 | } | 
 |  | 
 | static int piix4_pm_initfn(PCIDevice *dev) | 
 | { | 
 |     PIIX4PMState *s = PIIX4_PM(dev); | 
 |     uint8_t *pci_conf; | 
 |  | 
 |     pci_conf = dev->config; | 
 |     pci_conf[0x06] = 0x80; | 
 |     pci_conf[0x07] = 0x02; | 
 |     pci_conf[0x09] = 0x00; | 
 |     pci_conf[0x3d] = 0x01; // interrupt pin 1 | 
 |  | 
 |     /* APM */ | 
 |     apm_init(dev, &s->apm, apm_ctrl_changed, s); | 
 |  | 
 |     if (s->kvm_enabled) { | 
 |         /* Mark SMM as already inited to prevent SMM from running.  KVM does not | 
 |          * support SMM mode. */ | 
 |         pci_conf[0x5B] = 0x02; | 
 |     } | 
 |  | 
 |     /* XXX: which specification is used ? The i82731AB has different | 
 |        mappings */ | 
 |     pci_conf[0x90] = s->smb_io_base | 1; | 
 |     pci_conf[0x91] = s->smb_io_base >> 8; | 
 |     pci_conf[0xd2] = 0x09; | 
 |     pm_smbus_init(DEVICE(dev), &s->smb); | 
 |     memory_region_set_enabled(&s->smb.io, pci_conf[0xd2] & 1); | 
 |     memory_region_add_subregion(pci_address_space_io(dev), | 
 |                                 s->smb_io_base, &s->smb.io); | 
 |  | 
 |     memory_region_init(&s->io, OBJECT(s), "piix4-pm", 64); | 
 |     memory_region_set_enabled(&s->io, false); | 
 |     memory_region_add_subregion(pci_address_space_io(dev), | 
 |                                 0, &s->io); | 
 |  | 
 |     acpi_pm_tmr_init(&s->ar, pm_tmr_timer, &s->io); | 
 |     acpi_pm1_evt_init(&s->ar, pm_tmr_timer, &s->io); | 
 |     acpi_pm1_cnt_init(&s->ar, &s->io, s->s4_val); | 
 |     acpi_gpe_init(&s->ar, GPE_LEN); | 
 |  | 
 |     s->powerdown_notifier.notify = piix4_pm_powerdown_req; | 
 |     qemu_register_powerdown_notifier(&s->powerdown_notifier); | 
 |  | 
 |     s->machine_ready.notify = piix4_pm_machine_ready; | 
 |     qemu_add_machine_init_done_notifier(&s->machine_ready); | 
 |     qemu_register_reset(piix4_reset, s); | 
 |  | 
 |     piix4_acpi_system_hot_add_init(pci_address_space_io(dev), dev->bus, s); | 
 |  | 
 |     return 0; | 
 | } | 
 |  | 
 | i2c_bus *piix4_pm_init(PCIBus *bus, int devfn, uint32_t smb_io_base, | 
 |                        qemu_irq sci_irq, qemu_irq smi_irq, | 
 |                        int kvm_enabled, FWCfgState *fw_cfg) | 
 | { | 
 |     DeviceState *dev; | 
 |     PIIX4PMState *s; | 
 |  | 
 |     dev = DEVICE(pci_create(bus, devfn, TYPE_PIIX4_PM)); | 
 |     qdev_prop_set_uint32(dev, "smb_io_base", smb_io_base); | 
 |  | 
 |     s = PIIX4_PM(dev); | 
 |     s->irq = sci_irq; | 
 |     s->smi_irq = smi_irq; | 
 |     s->kvm_enabled = kvm_enabled; | 
 |  | 
 |     qdev_init_nofail(dev); | 
 |  | 
 |     if (fw_cfg) { | 
 |         uint8_t suspend[6] = {128, 0, 0, 129, 128, 128}; | 
 |         suspend[3] = 1 | ((!s->disable_s3) << 7); | 
 |         suspend[4] = s->s4_val | ((!s->disable_s4) << 7); | 
 |  | 
 |         fw_cfg_add_file(fw_cfg, "etc/system-states", g_memdup(suspend, 6), 6); | 
 |     } | 
 |  | 
 |     return s->smb.smbus; | 
 | } | 
 |  | 
 | static Property piix4_pm_properties[] = { | 
 |     DEFINE_PROP_UINT32("smb_io_base", PIIX4PMState, smb_io_base, 0), | 
 |     DEFINE_PROP_UINT8("disable_s3", PIIX4PMState, disable_s3, 0), | 
 |     DEFINE_PROP_UINT8("disable_s4", PIIX4PMState, disable_s4, 0), | 
 |     DEFINE_PROP_UINT8("s4_val", PIIX4PMState, s4_val, 2), | 
 |     DEFINE_PROP_END_OF_LIST(), | 
 | }; | 
 |  | 
 | static void piix4_pm_class_init(ObjectClass *klass, void *data) | 
 | { | 
 |     DeviceClass *dc = DEVICE_CLASS(klass); | 
 |     PCIDeviceClass *k = PCI_DEVICE_CLASS(klass); | 
 |  | 
 |     k->no_hotplug = 1; | 
 |     k->init = piix4_pm_initfn; | 
 |     k->config_write = pm_write_config; | 
 |     k->vendor_id = PCI_VENDOR_ID_INTEL; | 
 |     k->device_id = PCI_DEVICE_ID_INTEL_82371AB_3; | 
 |     k->revision = 0x03; | 
 |     k->class_id = PCI_CLASS_BRIDGE_OTHER; | 
 |     dc->desc = "PM"; | 
 |     dc->no_user = 1; | 
 |     dc->vmsd = &vmstate_acpi; | 
 |     dc->props = piix4_pm_properties; | 
 | } | 
 |  | 
 | static const TypeInfo piix4_pm_info = { | 
 |     .name          = TYPE_PIIX4_PM, | 
 |     .parent        = TYPE_PCI_DEVICE, | 
 |     .instance_size = sizeof(PIIX4PMState), | 
 |     .class_init    = piix4_pm_class_init, | 
 | }; | 
 |  | 
 | static void piix4_pm_register_types(void) | 
 | { | 
 |     type_register_static(&piix4_pm_info); | 
 | } | 
 |  | 
 | type_init(piix4_pm_register_types) | 
 |  | 
 | static uint64_t gpe_readb(void *opaque, hwaddr addr, unsigned width) | 
 | { | 
 |     PIIX4PMState *s = opaque; | 
 |     uint32_t val = acpi_gpe_ioport_readb(&s->ar, addr); | 
 |  | 
 |     PIIX4_DPRINTF("gpe read %" HWADDR_PRIx " == %" PRIu32 "\n", addr, val); | 
 |     return val; | 
 | } | 
 |  | 
 | static void gpe_writeb(void *opaque, hwaddr addr, uint64_t val, | 
 |                        unsigned width) | 
 | { | 
 |     PIIX4PMState *s = opaque; | 
 |  | 
 |     acpi_gpe_ioport_writeb(&s->ar, addr, val); | 
 |     pm_update_sci(s); | 
 |  | 
 |     PIIX4_DPRINTF("gpe write %" HWADDR_PRIx " <== %" PRIu64 "\n", addr, val); | 
 | } | 
 |  | 
 | static const MemoryRegionOps piix4_gpe_ops = { | 
 |     .read = gpe_readb, | 
 |     .write = gpe_writeb, | 
 |     .valid.min_access_size = 1, | 
 |     .valid.max_access_size = 4, | 
 |     .impl.min_access_size = 1, | 
 |     .impl.max_access_size = 1, | 
 |     .endianness = DEVICE_LITTLE_ENDIAN, | 
 | }; | 
 |  | 
 | static uint64_t pci_read(void *opaque, hwaddr addr, unsigned int size) | 
 | { | 
 |     PIIX4PMState *s = opaque; | 
 |     uint32_t val = 0; | 
 |  | 
 |     switch (addr) { | 
 |     case PCI_UP_BASE - PCI_HOTPLUG_ADDR: | 
 |         /* Manufacture an "up" value to cause a device check on any hotplug | 
 |          * slot with a device.  Extra device checks are harmless. */ | 
 |         val = s->pci0_slot_device_present & s->pci0_hotplug_enable; | 
 |         PIIX4_DPRINTF("pci_up_read %" PRIu32 "\n", val); | 
 |         break; | 
 |     case PCI_DOWN_BASE - PCI_HOTPLUG_ADDR: | 
 |         val = s->pci0_status.down; | 
 |         PIIX4_DPRINTF("pci_down_read %" PRIu32 "\n", val); | 
 |         break; | 
 |     case PCI_EJ_BASE - PCI_HOTPLUG_ADDR: | 
 |         /* No feature defined yet */ | 
 |         PIIX4_DPRINTF("pci_features_read %" PRIu32 "\n", val); | 
 |         break; | 
 |     case PCI_RMV_BASE - PCI_HOTPLUG_ADDR: | 
 |         val = s->pci0_hotplug_enable; | 
 |         break; | 
 |     default: | 
 |         break; | 
 |     } | 
 |  | 
 |     return val; | 
 | } | 
 |  | 
 | static void pci_write(void *opaque, hwaddr addr, uint64_t data, | 
 |                       unsigned int size) | 
 | { | 
 |     switch (addr) { | 
 |     case PCI_EJ_BASE - PCI_HOTPLUG_ADDR: | 
 |         acpi_piix_eject_slot(opaque, (uint32_t)data); | 
 |         PIIX4_DPRINTF("pciej write %" HWADDR_PRIx " <== %" PRIu64 "\n", | 
 |                       addr, data); | 
 |         break; | 
 |     default: | 
 |         break; | 
 |     } | 
 | } | 
 |  | 
 | static const MemoryRegionOps piix4_pci_ops = { | 
 |     .read = pci_read, | 
 |     .write = pci_write, | 
 |     .endianness = DEVICE_LITTLE_ENDIAN, | 
 |     .valid = { | 
 |         .min_access_size = 4, | 
 |         .max_access_size = 4, | 
 |     }, | 
 | }; | 
 |  | 
 | static uint64_t cpu_status_read(void *opaque, hwaddr addr, unsigned int size) | 
 | { | 
 |     PIIX4PMState *s = opaque; | 
 |     CPUStatus *cpus = &s->gpe_cpu; | 
 |     uint64_t val = cpus->sts[addr]; | 
 |  | 
 |     return val; | 
 | } | 
 |  | 
 | static void cpu_status_write(void *opaque, hwaddr addr, uint64_t data, | 
 |                              unsigned int size) | 
 | { | 
 |     /* TODO: implement VCPU removal on guest signal that CPU can be removed */ | 
 | } | 
 |  | 
 | static const MemoryRegionOps cpu_hotplug_ops = { | 
 |     .read = cpu_status_read, | 
 |     .write = cpu_status_write, | 
 |     .endianness = DEVICE_LITTLE_ENDIAN, | 
 |     .valid = { | 
 |         .min_access_size = 1, | 
 |         .max_access_size = 1, | 
 |     }, | 
 | }; | 
 |  | 
 | typedef enum { | 
 |     PLUG, | 
 |     UNPLUG, | 
 | } HotplugEventType; | 
 |  | 
 | static void piix4_cpu_hotplug_req(PIIX4PMState *s, CPUState *cpu, | 
 |                                   HotplugEventType action) | 
 | { | 
 |     CPUStatus *g = &s->gpe_cpu; | 
 |     ACPIGPE *gpe = &s->ar.gpe; | 
 |     CPUClass *k = CPU_GET_CLASS(cpu); | 
 |     int64_t cpu_id; | 
 |  | 
 |     assert(s != NULL); | 
 |  | 
 |     *gpe->sts = *gpe->sts | PIIX4_CPU_HOTPLUG_STATUS; | 
 |     cpu_id = k->get_arch_id(CPU(cpu)); | 
 |     if (action == PLUG) { | 
 |         g->sts[cpu_id / 8] |= (1 << (cpu_id % 8)); | 
 |     } else { | 
 |         g->sts[cpu_id / 8] &= ~(1 << (cpu_id % 8)); | 
 |     } | 
 |     pm_update_sci(s); | 
 | } | 
 |  | 
 | static void piix4_cpu_added_req(Notifier *n, void *opaque) | 
 | { | 
 |     PIIX4PMState *s = container_of(n, PIIX4PMState, cpu_added_notifier); | 
 |  | 
 |     piix4_cpu_hotplug_req(s, CPU(opaque), PLUG); | 
 | } | 
 |  | 
 | static void piix4_init_cpu_status(CPUState *cpu, void *data) | 
 | { | 
 |     CPUStatus *g = (CPUStatus *)data; | 
 |     CPUClass *k = CPU_GET_CLASS(cpu); | 
 |     int64_t id = k->get_arch_id(cpu); | 
 |  | 
 |     g_assert((id / 8) < PIIX4_PROC_LEN); | 
 |     g->sts[id / 8] |= (1 << (id % 8)); | 
 | } | 
 |  | 
 | static int piix4_device_hotplug(DeviceState *qdev, PCIDevice *dev, | 
 |                                 PCIHotplugState state); | 
 |  | 
 | static void piix4_acpi_system_hot_add_init(MemoryRegion *parent, | 
 |                                            PCIBus *bus, PIIX4PMState *s) | 
 | { | 
 |     memory_region_init_io(&s->io_gpe, OBJECT(s), &piix4_gpe_ops, s, | 
 |                           "acpi-gpe0", GPE_LEN); | 
 |     memory_region_add_subregion(parent, GPE_BASE, &s->io_gpe); | 
 |  | 
 |     memory_region_init_io(&s->io_pci, OBJECT(s), &piix4_pci_ops, s, | 
 |                           "acpi-pci-hotplug", PCI_HOTPLUG_SIZE); | 
 |     memory_region_add_subregion(parent, PCI_HOTPLUG_ADDR, | 
 |                                 &s->io_pci); | 
 |     pci_bus_hotplug(bus, piix4_device_hotplug, DEVICE(s)); | 
 |  | 
 |     qemu_for_each_cpu(piix4_init_cpu_status, &s->gpe_cpu); | 
 |     memory_region_init_io(&s->io_cpu, OBJECT(s), &cpu_hotplug_ops, s, | 
 |                           "acpi-cpu-hotplug", PIIX4_PROC_LEN); | 
 |     memory_region_add_subregion(parent, PIIX4_PROC_BASE, &s->io_cpu); | 
 |     s->cpu_added_notifier.notify = piix4_cpu_added_req; | 
 |     qemu_register_cpu_added_notifier(&s->cpu_added_notifier); | 
 | } | 
 |  | 
 | static void enable_device(PIIX4PMState *s, int slot) | 
 | { | 
 |     s->ar.gpe.sts[0] |= PIIX4_PCI_HOTPLUG_STATUS; | 
 |     s->pci0_slot_device_present |= (1U << slot); | 
 | } | 
 |  | 
 | static void disable_device(PIIX4PMState *s, int slot) | 
 | { | 
 |     s->ar.gpe.sts[0] |= PIIX4_PCI_HOTPLUG_STATUS; | 
 |     s->pci0_status.down |= (1U << slot); | 
 | } | 
 |  | 
 | static int piix4_device_hotplug(DeviceState *qdev, PCIDevice *dev, | 
 | 				PCIHotplugState state) | 
 | { | 
 |     int slot = PCI_SLOT(dev->devfn); | 
 |     PIIX4PMState *s = PIIX4_PM(qdev); | 
 |  | 
 |     /* Don't send event when device is enabled during qemu machine creation: | 
 |      * it is present on boot, no hotplug event is necessary. We do send an | 
 |      * event when the device is disabled later. */ | 
 |     if (state == PCI_COLDPLUG_ENABLED) { | 
 |         s->pci0_slot_device_present |= (1U << slot); | 
 |         return 0; | 
 |     } | 
 |  | 
 |     if (state == PCI_HOTPLUG_ENABLED) { | 
 |         enable_device(s, slot); | 
 |     } else { | 
 |         disable_device(s, slot); | 
 |     } | 
 |  | 
 |     pm_update_sci(s); | 
 |  | 
 |     return 0; | 
 | } |