import goldfish_fb from android
Signed-off-by: Greg Hackmann <ghackmann@google.com>
diff --git a/hw/display/goldfish_fb.c b/hw/display/goldfish_fb.c
new file mode 100644
index 0000000..16450b3
--- /dev/null
+++ b/hw/display/goldfish_fb.c
@@ -0,0 +1,675 @@
+/* Copyright (C) 2007-2008 The Android Open Source Project
+**
+** This software is licensed under the terms of the GNU General Public
+** License version 2, as published by the Free Software Foundation, and
+** may be copied, distributed, and modified under those terms.
+**
+** This program is distributed in the hope that it will be useful,
+** but WITHOUT ANY WARRANTY; without even the implied warranty of
+** MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+** GNU General Public License for more details.
+*/
+#include "qemu_file.h"
+#include "android/android.h"
+#include "android/utils/debug.h"
+#include "android/utils/duff.h"
+#include "goldfish_device.h"
+#include "console.h"
+
+/* These values *must* match the platform definitions found under
+ * hardware/libhardware/include/hardware/hardware.h
+ */
+enum {
+ HAL_PIXEL_FORMAT_RGBA_8888 = 1,
+ HAL_PIXEL_FORMAT_RGBX_8888 = 2,
+ HAL_PIXEL_FORMAT_RGB_888 = 3,
+ HAL_PIXEL_FORMAT_RGB_565 = 4,
+ HAL_PIXEL_FORMAT_BGRA_8888 = 5,
+ HAL_PIXEL_FORMAT_RGBA_5551 = 6,
+ HAL_PIXEL_FORMAT_RGBA_4444 = 7,
+};
+
+enum {
+ FB_GET_WIDTH = 0x00,
+ FB_GET_HEIGHT = 0x04,
+ FB_INT_STATUS = 0x08,
+ FB_INT_ENABLE = 0x0c,
+ FB_SET_BASE = 0x10,
+ FB_SET_ROTATION = 0x14,
+ FB_SET_BLANK = 0x18,
+ FB_GET_PHYS_WIDTH = 0x1c,
+ FB_GET_PHYS_HEIGHT = 0x20,
+ FB_GET_FORMAT = 0x24,
+
+ FB_INT_VSYNC = 1U << 0,
+ FB_INT_BASE_UPDATE_DONE = 1U << 1
+};
+
+struct goldfish_fb_state {
+ struct goldfish_device dev;
+ DisplayState* ds;
+ int pixel_format;
+ int bytes_per_pixel;
+ uint32_t fb_base;
+ uint32_t base_valid : 1;
+ uint32_t need_update : 1;
+ uint32_t need_int : 1;
+ uint32_t set_rotation : 2;
+ uint32_t blank : 1;
+ uint32_t int_status;
+ uint32_t int_enable;
+ int rotation; /* 0, 1, 2 or 3 */
+ int dpi;
+};
+
+#define GOLDFISH_FB_SAVE_VERSION 2
+
+static void goldfish_fb_save(QEMUFile* f, void* opaque)
+{
+ struct goldfish_fb_state* s = opaque;
+
+ DisplayState* ds = s->ds;
+
+ qemu_put_be32(f, ds->surface->width);
+ qemu_put_be32(f, ds->surface->height);
+ qemu_put_be32(f, ds->surface->linesize);
+ qemu_put_byte(f, 0);
+
+ qemu_put_be32(f, s->fb_base);
+ qemu_put_byte(f, s->base_valid);
+ qemu_put_byte(f, s->need_update);
+ qemu_put_byte(f, s->need_int);
+ qemu_put_byte(f, s->set_rotation);
+ qemu_put_byte(f, s->blank);
+ qemu_put_be32(f, s->int_status);
+ qemu_put_be32(f, s->int_enable);
+ qemu_put_be32(f, s->rotation);
+ qemu_put_be32(f, s->dpi);
+}
+
+static int goldfish_fb_load(QEMUFile* f, void* opaque, int version_id)
+{
+ struct goldfish_fb_state* s = opaque;
+ int ret = -1;
+ int ds_w, ds_h, ds_pitch, ds_rot;
+
+ if (version_id != GOLDFISH_FB_SAVE_VERSION)
+ goto Exit;
+
+ ds_w = qemu_get_be32(f);
+ ds_h = qemu_get_be32(f);
+ ds_pitch = qemu_get_be32(f);
+ ds_rot = qemu_get_byte(f);
+
+ DisplayState* ds = s->ds;
+
+ if (ds->surface->width != ds_w ||
+ ds->surface->height != ds_h ||
+ ds->surface->linesize != ds_pitch ||
+ ds_rot != 0)
+ {
+ /* XXX: We should be able to force a resize/rotation from here ? */
+ fprintf(stderr, "%s: framebuffer dimensions mismatch\n", __FUNCTION__);
+ goto Exit;
+ }
+
+ s->fb_base = qemu_get_be32(f);
+ s->base_valid = qemu_get_byte(f);
+ s->need_update = qemu_get_byte(f);
+ s->need_int = qemu_get_byte(f);
+ s->set_rotation = qemu_get_byte(f);
+ s->blank = qemu_get_byte(f);
+ s->int_status = qemu_get_be32(f);
+ s->int_enable = qemu_get_be32(f);
+ s->rotation = qemu_get_be32(f);
+ s->dpi = qemu_get_be32(f);
+
+ /* force a refresh */
+ s->need_update = 1;
+
+ ret = 0;
+Exit:
+ return ret;
+}
+
+/* Type used to record a mapping from display surface pixel format to
+ * HAL pixel format */
+typedef struct {
+ int pixel_format; /* HAL pixel format */
+ uint8_t bits;
+ uint8_t bytes;
+ uint32_t rmask, gmask, bmask, amask;
+} FbConfig;
+
+
+/* Return the pixel format of the current framebuffer, based on
+ * the current display surface's pixel format.
+ *
+ * Note that you should not call this function from the device initialization
+ * function, because the display surface will change format before the kernel
+ * start.
+ */
+static int goldfish_fb_get_pixel_format(struct goldfish_fb_state *s)
+{
+ if (s->pixel_format >= 0) {
+ return s->pixel_format;
+ }
+ static const FbConfig fb_configs[] = {
+ { HAL_PIXEL_FORMAT_RGB_565, 16, 2, 0xf800, 0x7e0, 0x1f, 0x0 },
+ { HAL_PIXEL_FORMAT_RGBX_8888, 32, 4, 0xff0000, 0xff00, 0xff, 0x0 },
+ { HAL_PIXEL_FORMAT_RGBA_8888, 32, 4, 0xff0000, 0xff00, 0xff, 0xff000000 },
+ { -1, }
+ };
+
+ /* Determine HAL pixel format value based on s->ds */
+ struct PixelFormat* pf = &s->ds->surface->pf;
+ if (VERBOSE_CHECK(init)) {
+ printf("%s:%d: display surface,pixel format:\n", __FUNCTION__, __LINE__);
+ printf(" bits/pixel: %d\n", pf->bits_per_pixel);
+ printf(" bytes/pixel: %d\n", pf->bytes_per_pixel);
+ printf(" depth: %d\n", pf->depth);
+ printf(" red: bits=%d mask=0x%x shift=%d max=0x%x\n",
+ pf->rbits, pf->rmask, pf->rshift, pf->rmax);
+ printf(" green: bits=%d mask=0x%x shift=%d max=0x%x\n",
+ pf->gbits, pf->gmask, pf->gshift, pf->gmax);
+ printf(" blue: bits=%d mask=0x%x shift=%d max=0x%x\n",
+ pf->bbits, pf->bmask, pf->bshift, pf->bmax);
+ printf(" alpha: bits=%d mask=0x%x shift=%d max=0x%x\n",
+ pf->abits, pf->amask, pf->ashift, pf->amax);
+ }
+
+ s->bytes_per_pixel = pf->bytes_per_pixel;
+ int nn;
+ for (nn = 0; fb_configs[nn].pixel_format >= 0; nn++) {
+ const FbConfig* fbc = &fb_configs[nn];
+ if (pf->bits_per_pixel == fbc->bits &&
+ pf->bytes_per_pixel == fbc->bytes &&
+ pf->rmask == fbc->rmask &&
+ pf->gmask == fbc->gmask &&
+ pf->bmask == fbc->bmask &&
+ pf->amask == fbc->amask) {
+ /* We found it */
+ s->pixel_format = fbc->pixel_format;
+ return s->pixel_format;
+ }
+ }
+ fprintf(stderr, "%s:%d: Unsupported display pixel format (depth=%d, bytespp=%d, bitspp=%d)\n",
+ __FUNCTION__, __LINE__,
+ pf->depth,
+ pf->bytes_per_pixel,
+ pf->bits_per_pixel);
+ exit(1);
+ return -1;
+}
+
+static int goldfish_fb_get_bytes_per_pixel(struct goldfish_fb_state *s)
+{
+ if (s->pixel_format < 0) {
+ (void) goldfish_fb_get_pixel_format(s);
+ }
+ return s->bytes_per_pixel;
+}
+
+static int
+pixels_to_mm(int pixels, int dpi)
+{
+ /* dpi = dots / inch
+ ** inch = dots / dpi
+ ** mm / 25.4 = dots / dpi
+ ** mm = (dots * 25.4)/dpi
+ */
+ return (int)(0.5 + 25.4 * pixels / dpi);
+}
+
+
+#define STATS 0
+
+#if STATS
+static int stats_counter;
+static long stats_total;
+static int stats_full_updates;
+static long stats_total_full_updates;
+#endif
+
+/* This structure is used to hold the inputs for
+ * compute_fb_update_rect_linear below.
+ * This corresponds to the source framebuffer and destination
+ * surface pixel buffers.
+ */
+typedef struct {
+ int width;
+ int height;
+ int bytes_per_pixel;
+ const uint8_t* src_pixels;
+ int src_pitch;
+ uint8_t* dst_pixels;
+ int dst_pitch;
+} FbUpdateState;
+
+/* This structure is used to hold the outputs for
+ * compute_fb_update_rect_linear below.
+ * This corresponds to the smalled bounding rectangle of the
+ * latest framebuffer update.
+ */
+typedef struct {
+ int xmin, ymin, xmax, ymax;
+} FbUpdateRect;
+
+/* Determine the smallest bounding rectangle of pixels which changed
+ * between the source (framebuffer) and destination (surface) pixel
+ * buffers.
+ *
+ * Return 0 if there was no change, otherwise, populate '*rect'
+ * and return 1.
+ *
+ * If 'dirty_base' is not 0, it is a physical address that will be
+ * used to speed-up the check using the VGA dirty bits. In practice
+ * this is only used if your kernel driver does not implement.
+ *
+ * This function assumes that the framebuffers are in linear memory.
+ * This may change later when we want to support larger framebuffers
+ * that exceed the max DMA aperture size though.
+ */
+static int
+compute_fb_update_rect_linear(FbUpdateState* fbs,
+ uint32_t dirty_base,
+ FbUpdateRect* rect)
+{
+ int yy;
+ int width = fbs->width;
+ const uint8_t* src_line = fbs->src_pixels;
+ uint8_t* dst_line = fbs->dst_pixels;
+ uint32_t dirty_addr = dirty_base;
+ rect->xmin = rect->ymin = INT_MAX;
+ rect->xmax = rect->ymax = INT_MIN;
+ for (yy = 0; yy < fbs->height; yy++) {
+ int xx1, xx2;
+ /* If dirty_addr is != 0, then use it as a physical address to
+ * use the VGA dirty bits table to speed up the detection of
+ * changed pixels.
+ */
+ if (dirty_addr != 0) {
+ int dirty = 0;
+ int len = fbs->src_pitch;
+
+ while (len > 0) {
+ int len2 = TARGET_PAGE_SIZE - (dirty_addr & (TARGET_PAGE_SIZE-1));
+
+ if (len2 > len)
+ len2 = len;
+
+ dirty |= cpu_physical_memory_get_dirty(dirty_addr, VGA_DIRTY_FLAG);
+ dirty_addr += len2;
+ len -= len2;
+ }
+
+ if (!dirty) { /* this line was not modified, skip to next one */
+ goto NEXT_LINE;
+ }
+ }
+
+ /* Then compute actual bounds of the changed pixels, while
+ * copying them from 'src' to 'dst'. This depends on the pixel depth.
+ */
+ switch (fbs->bytes_per_pixel) {
+ case 2:
+ {
+ const uint16_t* src = (const uint16_t*) src_line;
+ uint16_t* dst = (uint16_t*) dst_line;
+
+ xx1 = 0;
+ DUFF4(width, {
+ uint16_t spix = src[xx1];
+#if defined(HOST_WORDS_BIGENDIAN) != defined(TARGET_WORDS_BIGENDIAN)
+ spix = (uint16_t)((spix << 8) | (spix >> 8));
+#endif
+ if (spix != dst[xx1])
+ break;
+ xx1++;
+ });
+ if (xx1 == width) {
+ break;
+ }
+ xx2 = width-1;
+ DUFF4(xx2-xx1, {
+ if (src[xx2] != dst[xx2])
+ break;
+ xx2--;
+ });
+#if defined(HOST_WORDS_BIGENDIAN) != defined(TARGET_WORDS_BIGENDIAN)
+ /* Convert the guest pixels into host ones */
+ int xx = xx1;
+ DUFF4(xx2-xx1+1,{
+ unsigned spix = src[xx];
+ dst[xx] = (uint16_t)((spix << 8) | (spix >> 8));
+ xx++;
+ });
+#else
+ memcpy( dst+xx1, src+xx1, (xx2-xx1+1)*2 );
+#endif
+ break;
+ }
+
+ case 3:
+ {
+ xx1 = 0;
+ DUFF4(width, {
+ int xx = xx1*3;
+ if (src_line[xx+0] != dst_line[xx+0] ||
+ src_line[xx+1] != dst_line[xx+1] ||
+ src_line[xx+2] != dst_line[xx+2]) {
+ break;
+ }
+ xx1 ++;
+ });
+ if (xx1 == width) {
+ break;
+ }
+ xx2 = width-1;
+ DUFF4(xx2-xx1,{
+ int xx = xx2*3;
+ if (src_line[xx+0] != dst_line[xx+0] ||
+ src_line[xx+1] != dst_line[xx+1] ||
+ src_line[xx+2] != dst_line[xx+2]) {
+ break;
+ }
+ xx2--;
+ });
+ memcpy( dst_line+xx1*3, src_line+xx1*3, (xx2-xx1+1)*3 );
+ break;
+ }
+
+ case 4:
+ {
+ const uint32_t* src = (const uint32_t*) src_line;
+ uint32_t* dst = (uint32_t*) dst_line;
+
+ xx1 = 0;
+ DUFF4(width, {
+ uint32_t spix = src[xx1];
+#if defined(HOST_WORDS_BIGENDIAN) != defined(TARGET_WORDS_BIGENDIAN)
+ spix = (spix << 16) | (spix >> 16);
+ spix = ((spix << 8) & 0xff00ff00) | ((spix >> 8) & 0x00ff00ff);
+#endif
+ if (spix != dst[xx1]) {
+ break;
+ }
+ xx1++;
+ });
+ if (xx1 == width) {
+ break;
+ }
+ xx2 = width-1;
+ DUFF4(xx2-xx1,{
+ if (src[xx2] != dst[xx2]) {
+ break;
+ }
+ xx2--;
+ });
+#if defined(HOST_WORDS_BIGENDIAN) != defined(TARGET_WORDS_BIGENDIAN)
+ /* Convert the guest pixels into host ones */
+ int xx = xx1;
+ DUFF4(xx2-xx1+1,{
+ uint32_t spix = src[xx];
+ spix = (spix << 16) | (spix >> 16);
+ spix = ((spix << 8) & 0xff00ff00) | ((spix >> 8) & 0x00ff00ff);
+ dst[xx] = spix;
+ xx++;
+ })
+#else
+ memcpy( dst+xx1, src+xx1, (xx2-xx1+1)*4 );
+#endif
+ break;
+ }
+ default:
+ return 0;
+ }
+ /* Update bounds if pixels on this line were modified */
+ if (xx1 < width) {
+ if (xx1 < rect->xmin) rect->xmin = xx1;
+ if (xx2 > rect->xmax) rect->xmax = xx2;
+ if (yy < rect->ymin) rect->ymin = yy;
+ if (yy > rect->ymax) rect->ymax = yy;
+ }
+ NEXT_LINE:
+ src_line += fbs->src_pitch;
+ dst_line += fbs->dst_pitch;
+ }
+
+ if (rect->ymin > rect->ymax) { /* nothing changed */
+ return 0;
+ }
+
+ /* Always clear the dirty VGA bits */
+ cpu_physical_memory_reset_dirty(dirty_base + rect->ymin * fbs->src_pitch,
+ dirty_base + (rect->ymax+1)* fbs->src_pitch,
+ VGA_DIRTY_FLAG);
+ return 1;
+}
+
+
+static void goldfish_fb_update_display(void *opaque)
+{
+ struct goldfish_fb_state *s = (struct goldfish_fb_state *)opaque;
+ uint32_t base;
+ uint8_t* dst_line;
+ uint8_t* src_line;
+ int full_update = 0;
+ int width, height, pitch;
+
+ base = s->fb_base;
+ if(base == 0)
+ return;
+
+ if((s->int_enable & FB_INT_VSYNC) && !(s->int_status & FB_INT_VSYNC)) {
+ s->int_status |= FB_INT_VSYNC;
+ goldfish_device_set_irq(&s->dev, 0, 1);
+ }
+
+ if(s->need_update) {
+ full_update = 1;
+ if(s->need_int) {
+ s->int_status |= FB_INT_BASE_UPDATE_DONE;
+ if(s->int_enable & FB_INT_BASE_UPDATE_DONE)
+ goldfish_device_set_irq(&s->dev, 0, 1);
+ }
+ s->need_int = 0;
+ s->need_update = 0;
+ }
+
+ src_line = qemu_get_ram_ptr( base );
+
+ dst_line = s->ds->surface->data;
+ pitch = s->ds->surface->linesize;
+ width = s->ds->surface->width;
+ height = s->ds->surface->height;
+
+ FbUpdateState fbs;
+ FbUpdateRect rect;
+
+ fbs.width = width;
+ fbs.height = height;
+ fbs.dst_pixels = dst_line;
+ fbs.dst_pitch = pitch;
+ fbs.bytes_per_pixel = goldfish_fb_get_bytes_per_pixel(s);
+
+ fbs.src_pixels = src_line;
+ fbs.src_pitch = width*s->ds->surface->pf.bytes_per_pixel;
+
+
+#if STATS
+ if (full_update)
+ stats_full_updates += 1;
+ if (++stats_counter == 120) {
+ stats_total += stats_counter;
+ stats_total_full_updates += stats_full_updates;
+
+ printf( "full update stats: peak %.2f %% total %.2f %%\n",
+ stats_full_updates*100.0/stats_counter,
+ stats_total_full_updates*100.0/stats_total );
+
+ stats_counter = 0;
+ stats_full_updates = 0;
+ }
+#endif /* STATS */
+
+ if (s->blank)
+ {
+ memset( dst_line, 0, height*pitch );
+ rect.xmin = 0;
+ rect.ymin = 0;
+ rect.xmax = width-1;
+ rect.ymax = height-1;
+ }
+ else
+ {
+ if (full_update) { /* don't use dirty-bits optimization */
+ base = 0;
+ }
+ if (compute_fb_update_rect_linear(&fbs, base, &rect) == 0) {
+ return;
+ }
+ }
+
+ rect.xmax += 1;
+ rect.ymax += 1;
+#if 0
+ printf("goldfish_fb_update_display (y:%d,h:%d,x=%d,w=%d)\n",
+ rect.ymin, rect.ymax-rect.ymin, rect.xmin, rect.xmax-rect.xmin);
+#endif
+
+ dpy_update(s->ds, rect.xmin, rect.ymin, rect.xmax-rect.xmin, rect.ymax-rect.ymin);
+}
+
+static void goldfish_fb_invalidate_display(void * opaque)
+{
+ // is this called?
+ struct goldfish_fb_state *s = (struct goldfish_fb_state *)opaque;
+ s->need_update = 1;
+}
+
+static uint32_t goldfish_fb_read(void *opaque, target_phys_addr_t offset)
+{
+ uint32_t ret;
+ struct goldfish_fb_state *s = opaque;
+
+ switch(offset) {
+ case FB_GET_WIDTH:
+ ret = ds_get_width(s->ds);
+ //printf("FB_GET_WIDTH => %d\n", ret);
+ return ret;
+
+ case FB_GET_HEIGHT:
+ ret = ds_get_height(s->ds);
+ //printf( "FB_GET_HEIGHT = %d\n", ret);
+ return ret;
+
+ case FB_INT_STATUS:
+ ret = s->int_status & s->int_enable;
+ if(ret) {
+ s->int_status &= ~ret;
+ goldfish_device_set_irq(&s->dev, 0, 0);
+ }
+ return ret;
+
+ case FB_GET_PHYS_WIDTH:
+ ret = pixels_to_mm( ds_get_width(s->ds), s->dpi );
+ //printf( "FB_GET_PHYS_WIDTH => %d\n", ret );
+ return ret;
+
+ case FB_GET_PHYS_HEIGHT:
+ ret = pixels_to_mm( ds_get_height(s->ds), s->dpi );
+ //printf( "FB_GET_PHYS_HEIGHT => %d\n", ret );
+ return ret;
+
+ case FB_GET_FORMAT:
+ return goldfish_fb_get_pixel_format(s);
+
+ default:
+ cpu_abort (cpu_single_env, "goldfish_fb_read: Bad offset %x\n", offset);
+ return 0;
+ }
+}
+
+static void goldfish_fb_write(void *opaque, target_phys_addr_t offset,
+ uint32_t val)
+{
+ struct goldfish_fb_state *s = opaque;
+
+ switch(offset) {
+ case FB_INT_ENABLE:
+ s->int_enable = val;
+ goldfish_device_set_irq(&s->dev, 0, (s->int_status & s->int_enable));
+ break;
+ case FB_SET_BASE: {
+ int need_resize = !s->base_valid;
+ s->fb_base = val;
+ s->int_status &= ~FB_INT_BASE_UPDATE_DONE;
+ s->need_update = 1;
+ s->need_int = 1;
+ s->base_valid = 1;
+ if(s->set_rotation != s->rotation) {
+ //printf("FB_SET_BASE: rotation : %d => %d\n", s->rotation, s->set_rotation);
+ s->rotation = s->set_rotation;
+ need_resize = 1;
+ }
+ goldfish_device_set_irq(&s->dev, 0, (s->int_status & s->int_enable));
+ if (need_resize) {
+ //printf("FB_SET_BASE: need resize (rotation=%d)\n", s->rotation );
+ dpy_resize(s->ds);
+ }
+ } break;
+ case FB_SET_ROTATION:
+ //printf( "FB_SET_ROTATION %d\n", val);
+ s->set_rotation = val;
+ break;
+ case FB_SET_BLANK:
+ s->blank = val;
+ s->need_update = 1;
+ break;
+ default:
+ cpu_abort (cpu_single_env, "goldfish_fb_write: Bad offset %x\n", offset);
+ }
+}
+
+static CPUReadMemoryFunc *goldfish_fb_readfn[] = {
+ goldfish_fb_read,
+ goldfish_fb_read,
+ goldfish_fb_read
+};
+
+static CPUWriteMemoryFunc *goldfish_fb_writefn[] = {
+ goldfish_fb_write,
+ goldfish_fb_write,
+ goldfish_fb_write
+};
+
+void goldfish_fb_init(int id)
+{
+ struct goldfish_fb_state *s;
+
+ s = (struct goldfish_fb_state *)qemu_mallocz(sizeof(*s));
+ s->dev.name = "goldfish_fb";
+ s->dev.id = id;
+ s->dev.size = 0x1000;
+ s->dev.irq_count = 1;
+
+ s->ds = graphic_console_init(goldfish_fb_update_display,
+ goldfish_fb_invalidate_display,
+ NULL,
+ NULL,
+ s);
+
+ s->dpi = 165; /* XXX: Find better way to get actual value ! */
+
+ /* IMPORTANT: DO NOT COMPUTE s->pixel_format and s->bytes_per_pixel
+ * here because the display surface is going to change later.
+ */
+ s->bytes_per_pixel = 0;
+ s->pixel_format = -1;
+
+ goldfish_device_add(&s->dev, goldfish_fb_readfn, goldfish_fb_writefn, s);
+
+ register_savevm( "goldfish_fb", 0, GOLDFISH_FB_SAVE_VERSION,
+ goldfish_fb_save, goldfish_fb_load, s);
+}
