| /* |
| * DEC 21272 (TSUNAMI/TYPHOON) chipset emulation. |
| * |
| * Written by Richard Henderson. |
| * |
| * This work is licensed under the GNU GPL license version 2 or later. |
| */ |
| |
| #include "cpu.h" |
| #include "hw/hw.h" |
| #include "hw/devices.h" |
| #include "sysemu/sysemu.h" |
| #include "alpha_sys.h" |
| #include "exec/address-spaces.h" |
| |
| |
| #define TYPE_TYPHOON_PCI_HOST_BRIDGE "typhoon-pcihost" |
| |
| typedef struct TyphoonCchip { |
| MemoryRegion region; |
| uint64_t misc; |
| uint64_t drir; |
| uint64_t dim[4]; |
| uint32_t iic[4]; |
| AlphaCPU *cpu[4]; |
| } TyphoonCchip; |
| |
| typedef struct TyphoonWindow { |
| uint64_t wba; |
| uint64_t wsm; |
| uint64_t tba; |
| } TyphoonWindow; |
| |
| typedef struct TyphoonPchip { |
| MemoryRegion region; |
| MemoryRegion reg_iack; |
| MemoryRegion reg_mem; |
| MemoryRegion reg_io; |
| MemoryRegion reg_conf; |
| |
| AddressSpace iommu_as; |
| MemoryRegion iommu; |
| |
| uint64_t ctl; |
| TyphoonWindow win[4]; |
| } TyphoonPchip; |
| |
| #define TYPHOON_PCI_HOST_BRIDGE(obj) \ |
| OBJECT_CHECK(TyphoonState, (obj), TYPE_TYPHOON_PCI_HOST_BRIDGE) |
| |
| typedef struct TyphoonState { |
| PCIHostState parent_obj; |
| |
| TyphoonCchip cchip; |
| TyphoonPchip pchip; |
| MemoryRegion dchip_region; |
| MemoryRegion ram_region; |
| } TyphoonState; |
| |
| /* Called when one of DRIR or DIM changes. */ |
| static void cpu_irq_change(AlphaCPU *cpu, uint64_t req) |
| { |
| /* If there are any non-masked interrupts, tell the cpu. */ |
| if (cpu != NULL) { |
| CPUState *cs = CPU(cpu); |
| if (req) { |
| cpu_interrupt(cs, CPU_INTERRUPT_HARD); |
| } else { |
| cpu_reset_interrupt(cs, CPU_INTERRUPT_HARD); |
| } |
| } |
| } |
| |
| static uint64_t cchip_read(void *opaque, hwaddr addr, unsigned size) |
| { |
| CPUState *cpu = current_cpu; |
| TyphoonState *s = opaque; |
| uint64_t ret = 0; |
| |
| switch (addr) { |
| case 0x0000: |
| /* CSC: Cchip System Configuration Register. */ |
| /* All sorts of data here; probably the only thing relevant is |
| PIP<14> Pchip 1 Present = 0. */ |
| break; |
| |
| case 0x0040: |
| /* MTR: Memory Timing Register. */ |
| /* All sorts of stuff related to real DRAM. */ |
| break; |
| |
| case 0x0080: |
| /* MISC: Miscellaneous Register. */ |
| ret = s->cchip.misc | (cpu->cpu_index & 3); |
| break; |
| |
| case 0x00c0: |
| /* MPD: Memory Presence Detect Register. */ |
| break; |
| |
| case 0x0100: /* AAR0 */ |
| case 0x0140: /* AAR1 */ |
| case 0x0180: /* AAR2 */ |
| case 0x01c0: /* AAR3 */ |
| /* AAR: Array Address Register. */ |
| /* All sorts of information about DRAM. */ |
| break; |
| |
| case 0x0200: |
| /* DIM0: Device Interrupt Mask Register, CPU0. */ |
| ret = s->cchip.dim[0]; |
| break; |
| case 0x0240: |
| /* DIM1: Device Interrupt Mask Register, CPU1. */ |
| ret = s->cchip.dim[1]; |
| break; |
| case 0x0280: |
| /* DIR0: Device Interrupt Request Register, CPU0. */ |
| ret = s->cchip.dim[0] & s->cchip.drir; |
| break; |
| case 0x02c0: |
| /* DIR1: Device Interrupt Request Register, CPU1. */ |
| ret = s->cchip.dim[1] & s->cchip.drir; |
| break; |
| case 0x0300: |
| /* DRIR: Device Raw Interrupt Request Register. */ |
| ret = s->cchip.drir; |
| break; |
| |
| case 0x0340: |
| /* PRBEN: Probe Enable Register. */ |
| break; |
| |
| case 0x0380: |
| /* IIC0: Interval Ignore Count Register, CPU0. */ |
| ret = s->cchip.iic[0]; |
| break; |
| case 0x03c0: |
| /* IIC1: Interval Ignore Count Register, CPU1. */ |
| ret = s->cchip.iic[1]; |
| break; |
| |
| case 0x0400: /* MPR0 */ |
| case 0x0440: /* MPR1 */ |
| case 0x0480: /* MPR2 */ |
| case 0x04c0: /* MPR3 */ |
| /* MPR: Memory Programming Register. */ |
| break; |
| |
| case 0x0580: |
| /* TTR: TIGbus Timing Register. */ |
| /* All sorts of stuff related to interrupt delivery timings. */ |
| break; |
| case 0x05c0: |
| /* TDR: TIGbug Device Timing Register. */ |
| break; |
| |
| case 0x0600: |
| /* DIM2: Device Interrupt Mask Register, CPU2. */ |
| ret = s->cchip.dim[2]; |
| break; |
| case 0x0640: |
| /* DIM3: Device Interrupt Mask Register, CPU3. */ |
| ret = s->cchip.dim[3]; |
| break; |
| case 0x0680: |
| /* DIR2: Device Interrupt Request Register, CPU2. */ |
| ret = s->cchip.dim[2] & s->cchip.drir; |
| break; |
| case 0x06c0: |
| /* DIR3: Device Interrupt Request Register, CPU3. */ |
| ret = s->cchip.dim[3] & s->cchip.drir; |
| break; |
| |
| case 0x0700: |
| /* IIC2: Interval Ignore Count Register, CPU2. */ |
| ret = s->cchip.iic[2]; |
| break; |
| case 0x0740: |
| /* IIC3: Interval Ignore Count Register, CPU3. */ |
| ret = s->cchip.iic[3]; |
| break; |
| |
| case 0x0780: |
| /* PWR: Power Management Control. */ |
| break; |
| |
| case 0x0c00: /* CMONCTLA */ |
| case 0x0c40: /* CMONCTLB */ |
| case 0x0c80: /* CMONCNT01 */ |
| case 0x0cc0: /* CMONCNT23 */ |
| break; |
| |
| default: |
| cpu_unassigned_access(cpu, addr, false, false, 0, size); |
| return -1; |
| } |
| |
| return ret; |
| } |
| |
| static uint64_t dchip_read(void *opaque, hwaddr addr, unsigned size) |
| { |
| /* Skip this. It's all related to DRAM timing and setup. */ |
| return 0; |
| } |
| |
| static uint64_t pchip_read(void *opaque, hwaddr addr, unsigned size) |
| { |
| TyphoonState *s = opaque; |
| uint64_t ret = 0; |
| |
| switch (addr) { |
| case 0x0000: |
| /* WSBA0: Window Space Base Address Register. */ |
| ret = s->pchip.win[0].wba; |
| break; |
| case 0x0040: |
| /* WSBA1 */ |
| ret = s->pchip.win[1].wba; |
| break; |
| case 0x0080: |
| /* WSBA2 */ |
| ret = s->pchip.win[2].wba; |
| break; |
| case 0x00c0: |
| /* WSBA3 */ |
| ret = s->pchip.win[3].wba; |
| break; |
| |
| case 0x0100: |
| /* WSM0: Window Space Mask Register. */ |
| ret = s->pchip.win[0].wsm; |
| break; |
| case 0x0140: |
| /* WSM1 */ |
| ret = s->pchip.win[1].wsm; |
| break; |
| case 0x0180: |
| /* WSM2 */ |
| ret = s->pchip.win[2].wsm; |
| break; |
| case 0x01c0: |
| /* WSM3 */ |
| ret = s->pchip.win[3].wsm; |
| break; |
| |
| case 0x0200: |
| /* TBA0: Translated Base Address Register. */ |
| ret = s->pchip.win[0].tba; |
| break; |
| case 0x0240: |
| /* TBA1 */ |
| ret = s->pchip.win[1].tba; |
| break; |
| case 0x0280: |
| /* TBA2 */ |
| ret = s->pchip.win[2].tba; |
| break; |
| case 0x02c0: |
| /* TBA3 */ |
| ret = s->pchip.win[3].tba; |
| break; |
| |
| case 0x0300: |
| /* PCTL: Pchip Control Register. */ |
| ret = s->pchip.ctl; |
| break; |
| case 0x0340: |
| /* PLAT: Pchip Master Latency Register. */ |
| break; |
| case 0x03c0: |
| /* PERROR: Pchip Error Register. */ |
| break; |
| case 0x0400: |
| /* PERRMASK: Pchip Error Mask Register. */ |
| break; |
| case 0x0440: |
| /* PERRSET: Pchip Error Set Register. */ |
| break; |
| case 0x0480: |
| /* TLBIV: Translation Buffer Invalidate Virtual Register (WO). */ |
| break; |
| case 0x04c0: |
| /* TLBIA: Translation Buffer Invalidate All Register (WO). */ |
| break; |
| case 0x0500: /* PMONCTL */ |
| case 0x0540: /* PMONCNT */ |
| case 0x0800: /* SPRST */ |
| break; |
| |
| default: |
| cpu_unassigned_access(current_cpu, addr, false, false, 0, size); |
| return -1; |
| } |
| |
| return ret; |
| } |
| |
| static void cchip_write(void *opaque, hwaddr addr, |
| uint64_t val, unsigned size) |
| { |
| TyphoonState *s = opaque; |
| uint64_t oldval, newval; |
| |
| switch (addr) { |
| case 0x0000: |
| /* CSC: Cchip System Configuration Register. */ |
| /* All sorts of data here; nothing relevant RW. */ |
| break; |
| |
| case 0x0040: |
| /* MTR: Memory Timing Register. */ |
| /* All sorts of stuff related to real DRAM. */ |
| break; |
| |
| case 0x0080: |
| /* MISC: Miscellaneous Register. */ |
| newval = oldval = s->cchip.misc; |
| newval &= ~(val & 0x10000ff0); /* W1C fields */ |
| if (val & 0x100000) { |
| newval &= ~0xff0000ull; /* ACL clears ABT and ABW */ |
| } else { |
| newval |= val & 0x00f00000; /* ABT field is W1S */ |
| if ((newval & 0xf0000) == 0) { |
| newval |= val & 0xf0000; /* ABW field is W1S iff zero */ |
| } |
| } |
| newval |= (val & 0xf000) >> 4; /* IPREQ field sets IPINTR. */ |
| |
| newval &= ~0xf0000000000ull; /* WO and RW fields */ |
| newval |= val & 0xf0000000000ull; |
| s->cchip.misc = newval; |
| |
| /* Pass on changes to IPI and ITI state. */ |
| if ((newval ^ oldval) & 0xff0) { |
| int i; |
| for (i = 0; i < 4; ++i) { |
| AlphaCPU *cpu = s->cchip.cpu[i]; |
| if (cpu != NULL) { |
| CPUState *cs = CPU(cpu); |
| /* IPI can be either cleared or set by the write. */ |
| if (newval & (1 << (i + 8))) { |
| cpu_interrupt(cs, CPU_INTERRUPT_SMP); |
| } else { |
| cpu_reset_interrupt(cs, CPU_INTERRUPT_SMP); |
| } |
| |
| /* ITI can only be cleared by the write. */ |
| if ((newval & (1 << (i + 4))) == 0) { |
| cpu_reset_interrupt(cs, CPU_INTERRUPT_TIMER); |
| } |
| } |
| } |
| } |
| break; |
| |
| case 0x00c0: |
| /* MPD: Memory Presence Detect Register. */ |
| break; |
| |
| case 0x0100: /* AAR0 */ |
| case 0x0140: /* AAR1 */ |
| case 0x0180: /* AAR2 */ |
| case 0x01c0: /* AAR3 */ |
| /* AAR: Array Address Register. */ |
| /* All sorts of information about DRAM. */ |
| break; |
| |
| case 0x0200: /* DIM0 */ |
| /* DIM: Device Interrupt Mask Register, CPU0. */ |
| s->cchip.dim[0] = val; |
| cpu_irq_change(s->cchip.cpu[0], val & s->cchip.drir); |
| break; |
| case 0x0240: /* DIM1 */ |
| /* DIM: Device Interrupt Mask Register, CPU1. */ |
| s->cchip.dim[0] = val; |
| cpu_irq_change(s->cchip.cpu[1], val & s->cchip.drir); |
| break; |
| |
| case 0x0280: /* DIR0 (RO) */ |
| case 0x02c0: /* DIR1 (RO) */ |
| case 0x0300: /* DRIR (RO) */ |
| break; |
| |
| case 0x0340: |
| /* PRBEN: Probe Enable Register. */ |
| break; |
| |
| case 0x0380: /* IIC0 */ |
| s->cchip.iic[0] = val & 0xffffff; |
| break; |
| case 0x03c0: /* IIC1 */ |
| s->cchip.iic[1] = val & 0xffffff; |
| break; |
| |
| case 0x0400: /* MPR0 */ |
| case 0x0440: /* MPR1 */ |
| case 0x0480: /* MPR2 */ |
| case 0x04c0: /* MPR3 */ |
| /* MPR: Memory Programming Register. */ |
| break; |
| |
| case 0x0580: |
| /* TTR: TIGbus Timing Register. */ |
| /* All sorts of stuff related to interrupt delivery timings. */ |
| break; |
| case 0x05c0: |
| /* TDR: TIGbug Device Timing Register. */ |
| break; |
| |
| case 0x0600: |
| /* DIM2: Device Interrupt Mask Register, CPU2. */ |
| s->cchip.dim[2] = val; |
| cpu_irq_change(s->cchip.cpu[2], val & s->cchip.drir); |
| break; |
| case 0x0640: |
| /* DIM3: Device Interrupt Mask Register, CPU3. */ |
| s->cchip.dim[3] = val; |
| cpu_irq_change(s->cchip.cpu[3], val & s->cchip.drir); |
| break; |
| |
| case 0x0680: /* DIR2 (RO) */ |
| case 0x06c0: /* DIR3 (RO) */ |
| break; |
| |
| case 0x0700: /* IIC2 */ |
| s->cchip.iic[2] = val & 0xffffff; |
| break; |
| case 0x0740: /* IIC3 */ |
| s->cchip.iic[3] = val & 0xffffff; |
| break; |
| |
| case 0x0780: |
| /* PWR: Power Management Control. */ |
| break; |
| |
| case 0x0c00: /* CMONCTLA */ |
| case 0x0c40: /* CMONCTLB */ |
| case 0x0c80: /* CMONCNT01 */ |
| case 0x0cc0: /* CMONCNT23 */ |
| break; |
| |
| default: |
| cpu_unassigned_access(current_cpu, addr, true, false, 0, size); |
| return; |
| } |
| } |
| |
| static void dchip_write(void *opaque, hwaddr addr, |
| uint64_t val, unsigned size) |
| { |
| /* Skip this. It's all related to DRAM timing and setup. */ |
| } |
| |
| static void pchip_write(void *opaque, hwaddr addr, |
| uint64_t val, unsigned size) |
| { |
| TyphoonState *s = opaque; |
| uint64_t oldval; |
| |
| switch (addr) { |
| case 0x0000: |
| /* WSBA0: Window Space Base Address Register. */ |
| s->pchip.win[0].wba = val & 0xfff00003u; |
| break; |
| case 0x0040: |
| /* WSBA1 */ |
| s->pchip.win[1].wba = val & 0xfff00003u; |
| break; |
| case 0x0080: |
| /* WSBA2 */ |
| s->pchip.win[2].wba = val & 0xfff00003u; |
| break; |
| case 0x00c0: |
| /* WSBA3 */ |
| s->pchip.win[3].wba = (val & 0x80fff00001ull) | 2; |
| break; |
| |
| case 0x0100: |
| /* WSM0: Window Space Mask Register. */ |
| s->pchip.win[0].wsm = val & 0xfff00000u; |
| break; |
| case 0x0140: |
| /* WSM1 */ |
| s->pchip.win[1].wsm = val & 0xfff00000u; |
| break; |
| case 0x0180: |
| /* WSM2 */ |
| s->pchip.win[2].wsm = val & 0xfff00000u; |
| break; |
| case 0x01c0: |
| /* WSM3 */ |
| s->pchip.win[3].wsm = val & 0xfff00000u; |
| break; |
| |
| case 0x0200: |
| /* TBA0: Translated Base Address Register. */ |
| s->pchip.win[0].tba = val & 0x7fffffc00ull; |
| break; |
| case 0x0240: |
| /* TBA1 */ |
| s->pchip.win[1].tba = val & 0x7fffffc00ull; |
| break; |
| case 0x0280: |
| /* TBA2 */ |
| s->pchip.win[2].tba = val & 0x7fffffc00ull; |
| break; |
| case 0x02c0: |
| /* TBA3 */ |
| s->pchip.win[3].tba = val & 0x7fffffc00ull; |
| break; |
| |
| case 0x0300: |
| /* PCTL: Pchip Control Register. */ |
| oldval = s->pchip.ctl; |
| oldval &= ~0x00001cff0fc7ffull; /* RW fields */ |
| oldval |= val & 0x00001cff0fc7ffull; |
| s->pchip.ctl = oldval; |
| break; |
| |
| case 0x0340: |
| /* PLAT: Pchip Master Latency Register. */ |
| break; |
| case 0x03c0: |
| /* PERROR: Pchip Error Register. */ |
| break; |
| case 0x0400: |
| /* PERRMASK: Pchip Error Mask Register. */ |
| break; |
| case 0x0440: |
| /* PERRSET: Pchip Error Set Register. */ |
| break; |
| |
| case 0x0480: |
| /* TLBIV: Translation Buffer Invalidate Virtual Register. */ |
| break; |
| |
| case 0x04c0: |
| /* TLBIA: Translation Buffer Invalidate All Register (WO). */ |
| break; |
| |
| case 0x0500: |
| /* PMONCTL */ |
| case 0x0540: |
| /* PMONCNT */ |
| case 0x0800: |
| /* SPRST */ |
| break; |
| |
| default: |
| cpu_unassigned_access(current_cpu, addr, true, false, 0, size); |
| return; |
| } |
| } |
| |
| static const MemoryRegionOps cchip_ops = { |
| .read = cchip_read, |
| .write = cchip_write, |
| .endianness = DEVICE_LITTLE_ENDIAN, |
| .valid = { |
| .min_access_size = 8, |
| .max_access_size = 8, |
| }, |
| .impl = { |
| .min_access_size = 8, |
| .max_access_size = 8, |
| }, |
| }; |
| |
| static const MemoryRegionOps dchip_ops = { |
| .read = dchip_read, |
| .write = dchip_write, |
| .endianness = DEVICE_LITTLE_ENDIAN, |
| .valid = { |
| .min_access_size = 8, |
| .max_access_size = 8, |
| }, |
| .impl = { |
| .min_access_size = 8, |
| .max_access_size = 8, |
| }, |
| }; |
| |
| static const MemoryRegionOps pchip_ops = { |
| .read = pchip_read, |
| .write = pchip_write, |
| .endianness = DEVICE_LITTLE_ENDIAN, |
| .valid = { |
| .min_access_size = 8, |
| .max_access_size = 8, |
| }, |
| .impl = { |
| .min_access_size = 8, |
| .max_access_size = 8, |
| }, |
| }; |
| |
| /* A subroutine of typhoon_translate_iommu that builds an IOMMUTLBEntry |
| using the given translated address and mask. */ |
| static bool make_iommu_tlbe(hwaddr taddr, hwaddr mask, IOMMUTLBEntry *ret) |
| { |
| *ret = (IOMMUTLBEntry) { |
| .target_as = &address_space_memory, |
| .translated_addr = taddr, |
| .addr_mask = mask, |
| .perm = IOMMU_RW, |
| }; |
| return true; |
| } |
| |
| /* A subroutine of typhoon_translate_iommu that handles scatter-gather |
| translation, given the address of the PTE. */ |
| static bool pte_translate(hwaddr pte_addr, IOMMUTLBEntry *ret) |
| { |
| uint64_t pte = address_space_ldq(&address_space_memory, pte_addr, |
| MEMTXATTRS_UNSPECIFIED, NULL); |
| |
| /* Check valid bit. */ |
| if ((pte & 1) == 0) { |
| return false; |
| } |
| |
| return make_iommu_tlbe((pte & 0x3ffffe) << 12, 0x1fff, ret); |
| } |
| |
| /* A subroutine of typhoon_translate_iommu that handles one of the |
| four single-address-cycle translation windows. */ |
| static bool window_translate(TyphoonWindow *win, hwaddr addr, |
| IOMMUTLBEntry *ret) |
| { |
| uint32_t wba = win->wba; |
| uint64_t wsm = win->wsm; |
| uint64_t tba = win->tba; |
| uint64_t wsm_ext = wsm | 0xfffff; |
| |
| /* Check for window disabled. */ |
| if ((wba & 1) == 0) { |
| return false; |
| } |
| |
| /* Check for window hit. */ |
| if ((addr & ~wsm_ext) != (wba & 0xfff00000u)) { |
| return false; |
| } |
| |
| if (wba & 2) { |
| /* Scatter-gather translation. */ |
| hwaddr pte_addr; |
| |
| /* See table 10-6, Generating PTE address for PCI DMA Address. */ |
| pte_addr = tba & ~(wsm >> 10); |
| pte_addr |= (addr & (wsm | 0xfe000)) >> 10; |
| return pte_translate(pte_addr, ret); |
| } else { |
| /* Direct-mapped translation. */ |
| return make_iommu_tlbe(tba & ~wsm_ext, wsm_ext, ret); |
| } |
| } |
| |
| /* Handle PCI-to-system address translation. */ |
| /* TODO: A translation failure here ought to set PCI error codes on the |
| Pchip and generate a machine check interrupt. */ |
| static IOMMUTLBEntry typhoon_translate_iommu(MemoryRegion *iommu, hwaddr addr, |
| bool is_write) |
| { |
| TyphoonPchip *pchip = container_of(iommu, TyphoonPchip, iommu); |
| IOMMUTLBEntry ret; |
| int i; |
| |
| if (addr <= 0xffffffffu) { |
| /* Single-address cycle. */ |
| |
| /* Check for the Window Hole, inhibiting matching. */ |
| if ((pchip->ctl & 0x20) |
| && addr >= 0x80000 |
| && addr <= 0xfffff) { |
| goto failure; |
| } |
| |
| /* Check the first three windows. */ |
| for (i = 0; i < 3; ++i) { |
| if (window_translate(&pchip->win[i], addr, &ret)) { |
| goto success; |
| } |
| } |
| |
| /* Check the fourth window for DAC disable. */ |
| if ((pchip->win[3].wba & 0x80000000000ull) == 0 |
| && window_translate(&pchip->win[3], addr, &ret)) { |
| goto success; |
| } |
| } else { |
| /* Double-address cycle. */ |
| |
| if (addr >= 0x10000000000ull && addr < 0x20000000000ull) { |
| /* Check for the DMA monster window. */ |
| if (pchip->ctl & 0x40) { |
| /* See 10.1.4.4; in particular <39:35> is ignored. */ |
| make_iommu_tlbe(0, 0x007ffffffffull, &ret); |
| goto success; |
| } |
| } |
| |
| if (addr >= 0x80000000000ull && addr <= 0xfffffffffffull) { |
| /* Check the fourth window for DAC enable and window enable. */ |
| if ((pchip->win[3].wba & 0x80000000001ull) == 0x80000000001ull) { |
| uint64_t pte_addr; |
| |
| pte_addr = pchip->win[3].tba & 0x7ffc00000ull; |
| pte_addr |= (addr & 0xffffe000u) >> 10; |
| if (pte_translate(pte_addr, &ret)) { |
| goto success; |
| } |
| } |
| } |
| } |
| |
| failure: |
| ret = (IOMMUTLBEntry) { .perm = IOMMU_NONE }; |
| success: |
| return ret; |
| } |
| |
| static const MemoryRegionIOMMUOps typhoon_iommu_ops = { |
| .translate = typhoon_translate_iommu, |
| }; |
| |
| static AddressSpace *typhoon_pci_dma_iommu(PCIBus *bus, void *opaque, int devfn) |
| { |
| TyphoonState *s = opaque; |
| return &s->pchip.iommu_as; |
| } |
| |
| static void typhoon_set_irq(void *opaque, int irq, int level) |
| { |
| TyphoonState *s = opaque; |
| uint64_t drir; |
| int i; |
| |
| /* Set/Reset the bit in CCHIP.DRIR based on IRQ+LEVEL. */ |
| drir = s->cchip.drir; |
| if (level) { |
| drir |= 1ull << irq; |
| } else { |
| drir &= ~(1ull << irq); |
| } |
| s->cchip.drir = drir; |
| |
| for (i = 0; i < 4; ++i) { |
| cpu_irq_change(s->cchip.cpu[i], s->cchip.dim[i] & drir); |
| } |
| } |
| |
| static void typhoon_set_isa_irq(void *opaque, int irq, int level) |
| { |
| typhoon_set_irq(opaque, 55, level); |
| } |
| |
| static void typhoon_set_timer_irq(void *opaque, int irq, int level) |
| { |
| TyphoonState *s = opaque; |
| int i; |
| |
| /* Thankfully, the mc146818rtc code doesn't track the IRQ state, |
| and so we don't have to worry about missing interrupts just |
| because we never actually ACK the interrupt. Just ignore any |
| case of the interrupt level going low. */ |
| if (level == 0) { |
| return; |
| } |
| |
| /* Deliver the interrupt to each CPU, considering each CPU's IIC. */ |
| for (i = 0; i < 4; ++i) { |
| AlphaCPU *cpu = s->cchip.cpu[i]; |
| if (cpu != NULL) { |
| uint32_t iic = s->cchip.iic[i]; |
| |
| /* ??? The verbage in Section 10.2.2.10 isn't 100% clear. |
| Bit 24 is the OverFlow bit, RO, and set when the count |
| decrements past 0. When is OF cleared? My guess is that |
| OF is actually cleared when the IIC is written, and that |
| the ICNT field always decrements. At least, that's an |
| interpretation that makes sense, and "allows the CPU to |
| determine exactly how mant interval timer ticks were |
| skipped". At least within the next 4M ticks... */ |
| |
| iic = ((iic - 1) & 0x1ffffff) | (iic & 0x1000000); |
| s->cchip.iic[i] = iic; |
| |
| if (iic & 0x1000000) { |
| /* Set the ITI bit for this cpu. */ |
| s->cchip.misc |= 1 << (i + 4); |
| /* And signal the interrupt. */ |
| cpu_interrupt(CPU(cpu), CPU_INTERRUPT_TIMER); |
| } |
| } |
| } |
| } |
| |
| static void typhoon_alarm_timer(void *opaque) |
| { |
| TyphoonState *s = (TyphoonState *)((uintptr_t)opaque & ~3); |
| int cpu = (uintptr_t)opaque & 3; |
| |
| /* Set the ITI bit for this cpu. */ |
| s->cchip.misc |= 1 << (cpu + 4); |
| cpu_interrupt(CPU(s->cchip.cpu[cpu]), CPU_INTERRUPT_TIMER); |
| } |
| |
| PCIBus *typhoon_init(ram_addr_t ram_size, ISABus **isa_bus, |
| qemu_irq *p_rtc_irq, |
| AlphaCPU *cpus[4], pci_map_irq_fn sys_map_irq) |
| { |
| const uint64_t MB = 1024 * 1024; |
| const uint64_t GB = 1024 * MB; |
| MemoryRegion *addr_space = get_system_memory(); |
| DeviceState *dev; |
| TyphoonState *s; |
| PCIHostState *phb; |
| PCIBus *b; |
| int i; |
| |
| dev = qdev_create(NULL, TYPE_TYPHOON_PCI_HOST_BRIDGE); |
| qdev_init_nofail(dev); |
| |
| s = TYPHOON_PCI_HOST_BRIDGE(dev); |
| phb = PCI_HOST_BRIDGE(dev); |
| |
| s->cchip.misc = 0x800000000ull; /* Revision: Typhoon. */ |
| s->pchip.win[3].wba = 2; /* Window 3 SG always enabled. */ |
| |
| /* Remember the CPUs so that we can deliver interrupts to them. */ |
| for (i = 0; i < 4; i++) { |
| AlphaCPU *cpu = cpus[i]; |
| s->cchip.cpu[i] = cpu; |
| if (cpu != NULL) { |
| cpu->alarm_timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, |
| typhoon_alarm_timer, |
| (void *)((uintptr_t)s + i)); |
| } |
| } |
| |
| *p_rtc_irq = qemu_allocate_irq(typhoon_set_timer_irq, s, 0); |
| |
| /* Main memory region, 0x00.0000.0000. Real hardware supports 32GB, |
| but the address space hole reserved at this point is 8TB. */ |
| memory_region_allocate_system_memory(&s->ram_region, OBJECT(s), "ram", |
| ram_size); |
| memory_region_add_subregion(addr_space, 0, &s->ram_region); |
| |
| /* TIGbus, 0x801.0000.0000, 1GB. */ |
| /* ??? The TIGbus is used for delivering interrupts, and access to |
| the flash ROM. I'm not sure that we need to implement it at all. */ |
| |
| /* Pchip0 CSRs, 0x801.8000.0000, 256MB. */ |
| memory_region_init_io(&s->pchip.region, OBJECT(s), &pchip_ops, s, "pchip0", |
| 256*MB); |
| memory_region_add_subregion(addr_space, 0x80180000000ULL, |
| &s->pchip.region); |
| |
| /* Cchip CSRs, 0x801.A000.0000, 256MB. */ |
| memory_region_init_io(&s->cchip.region, OBJECT(s), &cchip_ops, s, "cchip0", |
| 256*MB); |
| memory_region_add_subregion(addr_space, 0x801a0000000ULL, |
| &s->cchip.region); |
| |
| /* Dchip CSRs, 0x801.B000.0000, 256MB. */ |
| memory_region_init_io(&s->dchip_region, OBJECT(s), &dchip_ops, s, "dchip0", |
| 256*MB); |
| memory_region_add_subregion(addr_space, 0x801b0000000ULL, |
| &s->dchip_region); |
| |
| /* Pchip0 PCI memory, 0x800.0000.0000, 4GB. */ |
| memory_region_init(&s->pchip.reg_mem, OBJECT(s), "pci0-mem", 4*GB); |
| memory_region_add_subregion(addr_space, 0x80000000000ULL, |
| &s->pchip.reg_mem); |
| |
| /* Pchip0 PCI I/O, 0x801.FC00.0000, 32MB. */ |
| memory_region_init_io(&s->pchip.reg_io, OBJECT(s), &alpha_pci_ignore_ops, |
| NULL, "pci0-io", 32*MB); |
| memory_region_add_subregion(addr_space, 0x801fc000000ULL, |
| &s->pchip.reg_io); |
| |
| b = pci_register_bus(dev, "pci", |
| typhoon_set_irq, sys_map_irq, s, |
| &s->pchip.reg_mem, &s->pchip.reg_io, |
| 0, 64, TYPE_PCI_BUS); |
| phb->bus = b; |
| |
| /* Host memory as seen from the PCI side, via the IOMMU. */ |
| memory_region_init_iommu(&s->pchip.iommu, OBJECT(s), &typhoon_iommu_ops, |
| "iommu-typhoon", UINT64_MAX); |
| address_space_init(&s->pchip.iommu_as, &s->pchip.iommu, "pchip0-pci"); |
| pci_setup_iommu(b, typhoon_pci_dma_iommu, s); |
| |
| /* Pchip0 PCI special/interrupt acknowledge, 0x801.F800.0000, 64MB. */ |
| memory_region_init_io(&s->pchip.reg_iack, OBJECT(s), &alpha_pci_iack_ops, |
| b, "pci0-iack", 64*MB); |
| memory_region_add_subregion(addr_space, 0x801f8000000ULL, |
| &s->pchip.reg_iack); |
| |
| /* Pchip0 PCI configuration, 0x801.FE00.0000, 16MB. */ |
| memory_region_init_io(&s->pchip.reg_conf, OBJECT(s), &alpha_pci_conf1_ops, |
| b, "pci0-conf", 16*MB); |
| memory_region_add_subregion(addr_space, 0x801fe000000ULL, |
| &s->pchip.reg_conf); |
| |
| /* For the record, these are the mappings for the second PCI bus. |
| We can get away with not implementing them because we indicate |
| via the Cchip.CSC<PIP> bit that Pchip1 is not present. */ |
| /* Pchip1 PCI memory, 0x802.0000.0000, 4GB. */ |
| /* Pchip1 CSRs, 0x802.8000.0000, 256MB. */ |
| /* Pchip1 PCI special/interrupt acknowledge, 0x802.F800.0000, 64MB. */ |
| /* Pchip1 PCI I/O, 0x802.FC00.0000, 32MB. */ |
| /* Pchip1 PCI configuration, 0x802.FE00.0000, 16MB. */ |
| |
| /* Init the ISA bus. */ |
| /* ??? Technically there should be a cy82c693ub pci-isa bridge. */ |
| { |
| qemu_irq *isa_irqs; |
| |
| *isa_bus = isa_bus_new(NULL, get_system_memory(), &s->pchip.reg_io); |
| isa_irqs = i8259_init(*isa_bus, |
| qemu_allocate_irq(typhoon_set_isa_irq, s, 0)); |
| isa_bus_irqs(*isa_bus, isa_irqs); |
| } |
| |
| return b; |
| } |
| |
| static int typhoon_pcihost_init(SysBusDevice *dev) |
| { |
| return 0; |
| } |
| |
| static void typhoon_pcihost_class_init(ObjectClass *klass, void *data) |
| { |
| SysBusDeviceClass *k = SYS_BUS_DEVICE_CLASS(klass); |
| |
| k->init = typhoon_pcihost_init; |
| } |
| |
| static const TypeInfo typhoon_pcihost_info = { |
| .name = TYPE_TYPHOON_PCI_HOST_BRIDGE, |
| .parent = TYPE_PCI_HOST_BRIDGE, |
| .instance_size = sizeof(TyphoonState), |
| .class_init = typhoon_pcihost_class_init, |
| }; |
| |
| static void typhoon_register_types(void) |
| { |
| type_register_static(&typhoon_pcihost_info); |
| } |
| |
| type_init(typhoon_register_types) |
