|  | /* | 
|  | * QEMU USB OHCI Emulation | 
|  | * Copyright (c) 2004 Gianni Tedesco | 
|  | * Copyright (c) 2006 CodeSourcery | 
|  | * Copyright (c) 2006 Openedhand Ltd. | 
|  | * | 
|  | * This library is free software; you can redistribute it and/or | 
|  | * modify it under the terms of the GNU Lesser General Public | 
|  | * License as published by the Free Software Foundation; either | 
|  | * version 2 of the License, or (at your option) any later version. | 
|  | * | 
|  | * This library is distributed in the hope that it will be useful, | 
|  | * but WITHOUT ANY WARRANTY; without even the implied warranty of | 
|  | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU | 
|  | * Lesser General Public License for more details. | 
|  | * | 
|  | * You should have received a copy of the GNU Lesser General Public | 
|  | * License along with this library; if not, see <http://www.gnu.org/licenses/>. | 
|  | * | 
|  | * TODO: | 
|  | *  o Isochronous transfers | 
|  | *  o Allocate bandwidth in frames properly | 
|  | *  o Disable timers when nothing needs to be done, or remove timer usage | 
|  | *    all together. | 
|  | *  o Handle unrecoverable errors properly | 
|  | *  o BIOS work to boot from USB storage | 
|  | */ | 
|  |  | 
|  | #include "hw.h" | 
|  | #include "qemu-timer.h" | 
|  | #include "usb.h" | 
|  | #include "pci.h" | 
|  | #include "usb-ohci.h" | 
|  | #include "sysbus.h" | 
|  | #include "qdev-addr.h" | 
|  |  | 
|  | //#define DEBUG_OHCI | 
|  | /* Dump packet contents.  */ | 
|  | //#define DEBUG_PACKET | 
|  | //#define DEBUG_ISOCH | 
|  | /* This causes frames to occur 1000x slower */ | 
|  | //#define OHCI_TIME_WARP 1 | 
|  |  | 
|  | #ifdef DEBUG_OHCI | 
|  | #define DPRINTF printf | 
|  | #else | 
|  | #define DPRINTF(...) | 
|  | #endif | 
|  |  | 
|  | /* Number of Downstream Ports on the root hub.  */ | 
|  |  | 
|  | #define OHCI_MAX_PORTS 15 | 
|  |  | 
|  | static int64_t usb_frame_time; | 
|  | static int64_t usb_bit_time; | 
|  |  | 
|  | typedef struct OHCIPort { | 
|  | USBPort port; | 
|  | uint32_t ctrl; | 
|  | } OHCIPort; | 
|  |  | 
|  | typedef struct { | 
|  | USBBus bus; | 
|  | qemu_irq irq; | 
|  | MemoryRegion mem; | 
|  | int num_ports; | 
|  | const char *name; | 
|  |  | 
|  | QEMUTimer *eof_timer; | 
|  | int64_t sof_time; | 
|  |  | 
|  | /* OHCI state */ | 
|  | /* Control partition */ | 
|  | uint32_t ctl, status; | 
|  | uint32_t intr_status; | 
|  | uint32_t intr; | 
|  |  | 
|  | /* memory pointer partition */ | 
|  | uint32_t hcca; | 
|  | uint32_t ctrl_head, ctrl_cur; | 
|  | uint32_t bulk_head, bulk_cur; | 
|  | uint32_t per_cur; | 
|  | uint32_t done; | 
|  | int done_count; | 
|  |  | 
|  | /* Frame counter partition */ | 
|  | uint32_t fsmps:15; | 
|  | uint32_t fit:1; | 
|  | uint32_t fi:14; | 
|  | uint32_t frt:1; | 
|  | uint16_t frame_number; | 
|  | uint16_t padding; | 
|  | uint32_t pstart; | 
|  | uint32_t lst; | 
|  |  | 
|  | /* Root Hub partition */ | 
|  | uint32_t rhdesc_a, rhdesc_b; | 
|  | uint32_t rhstatus; | 
|  | OHCIPort rhport[OHCI_MAX_PORTS]; | 
|  |  | 
|  | /* PXA27x Non-OHCI events */ | 
|  | uint32_t hstatus; | 
|  | uint32_t hmask; | 
|  | uint32_t hreset; | 
|  | uint32_t htest; | 
|  |  | 
|  | /* SM501 local memory offset */ | 
|  | target_phys_addr_t localmem_base; | 
|  |  | 
|  | /* Active packets.  */ | 
|  | uint32_t old_ctl; | 
|  | USBPacket usb_packet; | 
|  | uint8_t usb_buf[8192]; | 
|  | uint32_t async_td; | 
|  | int async_complete; | 
|  |  | 
|  | } OHCIState; | 
|  |  | 
|  | /* Host Controller Communications Area */ | 
|  | struct ohci_hcca { | 
|  | uint32_t intr[32]; | 
|  | uint16_t frame, pad; | 
|  | uint32_t done; | 
|  | }; | 
|  |  | 
|  | static void ohci_bus_stop(OHCIState *ohci); | 
|  | static void ohci_async_cancel_device(OHCIState *ohci, USBDevice *dev); | 
|  |  | 
|  | /* Bitfields for the first word of an Endpoint Desciptor.  */ | 
|  | #define OHCI_ED_FA_SHIFT  0 | 
|  | #define OHCI_ED_FA_MASK   (0x7f<<OHCI_ED_FA_SHIFT) | 
|  | #define OHCI_ED_EN_SHIFT  7 | 
|  | #define OHCI_ED_EN_MASK   (0xf<<OHCI_ED_EN_SHIFT) | 
|  | #define OHCI_ED_D_SHIFT   11 | 
|  | #define OHCI_ED_D_MASK    (3<<OHCI_ED_D_SHIFT) | 
|  | #define OHCI_ED_S         (1<<13) | 
|  | #define OHCI_ED_K         (1<<14) | 
|  | #define OHCI_ED_F         (1<<15) | 
|  | #define OHCI_ED_MPS_SHIFT 16 | 
|  | #define OHCI_ED_MPS_MASK  (0x7ff<<OHCI_ED_MPS_SHIFT) | 
|  |  | 
|  | /* Flags in the head field of an Endpoint Desciptor.  */ | 
|  | #define OHCI_ED_H         1 | 
|  | #define OHCI_ED_C         2 | 
|  |  | 
|  | /* Bitfields for the first word of a Transfer Desciptor.  */ | 
|  | #define OHCI_TD_R         (1<<18) | 
|  | #define OHCI_TD_DP_SHIFT  19 | 
|  | #define OHCI_TD_DP_MASK   (3<<OHCI_TD_DP_SHIFT) | 
|  | #define OHCI_TD_DI_SHIFT  21 | 
|  | #define OHCI_TD_DI_MASK   (7<<OHCI_TD_DI_SHIFT) | 
|  | #define OHCI_TD_T0        (1<<24) | 
|  | #define OHCI_TD_T1        (1<<25) | 
|  | #define OHCI_TD_EC_SHIFT  26 | 
|  | #define OHCI_TD_EC_MASK   (3<<OHCI_TD_EC_SHIFT) | 
|  | #define OHCI_TD_CC_SHIFT  28 | 
|  | #define OHCI_TD_CC_MASK   (0xf<<OHCI_TD_CC_SHIFT) | 
|  |  | 
|  | /* Bitfields for the first word of an Isochronous Transfer Desciptor.  */ | 
|  | /* CC & DI - same as in the General Transfer Desciptor */ | 
|  | #define OHCI_TD_SF_SHIFT  0 | 
|  | #define OHCI_TD_SF_MASK   (0xffff<<OHCI_TD_SF_SHIFT) | 
|  | #define OHCI_TD_FC_SHIFT  24 | 
|  | #define OHCI_TD_FC_MASK   (7<<OHCI_TD_FC_SHIFT) | 
|  |  | 
|  | /* Isochronous Transfer Desciptor - Offset / PacketStatusWord */ | 
|  | #define OHCI_TD_PSW_CC_SHIFT 12 | 
|  | #define OHCI_TD_PSW_CC_MASK  (0xf<<OHCI_TD_PSW_CC_SHIFT) | 
|  | #define OHCI_TD_PSW_SIZE_SHIFT 0 | 
|  | #define OHCI_TD_PSW_SIZE_MASK  (0xfff<<OHCI_TD_PSW_SIZE_SHIFT) | 
|  |  | 
|  | #define OHCI_PAGE_MASK    0xfffff000 | 
|  | #define OHCI_OFFSET_MASK  0xfff | 
|  |  | 
|  | #define OHCI_DPTR_MASK    0xfffffff0 | 
|  |  | 
|  | #define OHCI_BM(val, field) \ | 
|  | (((val) & OHCI_##field##_MASK) >> OHCI_##field##_SHIFT) | 
|  |  | 
|  | #define OHCI_SET_BM(val, field, newval) do { \ | 
|  | val &= ~OHCI_##field##_MASK; \ | 
|  | val |= ((newval) << OHCI_##field##_SHIFT) & OHCI_##field##_MASK; \ | 
|  | } while(0) | 
|  |  | 
|  | /* endpoint descriptor */ | 
|  | struct ohci_ed { | 
|  | uint32_t flags; | 
|  | uint32_t tail; | 
|  | uint32_t head; | 
|  | uint32_t next; | 
|  | }; | 
|  |  | 
|  | /* General transfer descriptor */ | 
|  | struct ohci_td { | 
|  | uint32_t flags; | 
|  | uint32_t cbp; | 
|  | uint32_t next; | 
|  | uint32_t be; | 
|  | }; | 
|  |  | 
|  | /* Isochronous transfer descriptor */ | 
|  | struct ohci_iso_td { | 
|  | uint32_t flags; | 
|  | uint32_t bp; | 
|  | uint32_t next; | 
|  | uint32_t be; | 
|  | uint16_t offset[8]; | 
|  | }; | 
|  |  | 
|  | #define USB_HZ                      12000000 | 
|  |  | 
|  | /* OHCI Local stuff */ | 
|  | #define OHCI_CTL_CBSR         ((1<<0)|(1<<1)) | 
|  | #define OHCI_CTL_PLE          (1<<2) | 
|  | #define OHCI_CTL_IE           (1<<3) | 
|  | #define OHCI_CTL_CLE          (1<<4) | 
|  | #define OHCI_CTL_BLE          (1<<5) | 
|  | #define OHCI_CTL_HCFS         ((1<<6)|(1<<7)) | 
|  | #define  OHCI_USB_RESET       0x00 | 
|  | #define  OHCI_USB_RESUME      0x40 | 
|  | #define  OHCI_USB_OPERATIONAL 0x80 | 
|  | #define  OHCI_USB_SUSPEND     0xc0 | 
|  | #define OHCI_CTL_IR           (1<<8) | 
|  | #define OHCI_CTL_RWC          (1<<9) | 
|  | #define OHCI_CTL_RWE          (1<<10) | 
|  |  | 
|  | #define OHCI_STATUS_HCR       (1<<0) | 
|  | #define OHCI_STATUS_CLF       (1<<1) | 
|  | #define OHCI_STATUS_BLF       (1<<2) | 
|  | #define OHCI_STATUS_OCR       (1<<3) | 
|  | #define OHCI_STATUS_SOC       ((1<<6)|(1<<7)) | 
|  |  | 
|  | #define OHCI_INTR_SO          (1<<0) /* Scheduling overrun */ | 
|  | #define OHCI_INTR_WD          (1<<1) /* HcDoneHead writeback */ | 
|  | #define OHCI_INTR_SF          (1<<2) /* Start of frame */ | 
|  | #define OHCI_INTR_RD          (1<<3) /* Resume detect */ | 
|  | #define OHCI_INTR_UE          (1<<4) /* Unrecoverable error */ | 
|  | #define OHCI_INTR_FNO         (1<<5) /* Frame number overflow */ | 
|  | #define OHCI_INTR_RHSC        (1<<6) /* Root hub status change */ | 
|  | #define OHCI_INTR_OC          (1<<30) /* Ownership change */ | 
|  | #define OHCI_INTR_MIE         (1<<31) /* Master Interrupt Enable */ | 
|  |  | 
|  | #define OHCI_HCCA_SIZE        0x100 | 
|  | #define OHCI_HCCA_MASK        0xffffff00 | 
|  |  | 
|  | #define OHCI_EDPTR_MASK       0xfffffff0 | 
|  |  | 
|  | #define OHCI_FMI_FI           0x00003fff | 
|  | #define OHCI_FMI_FSMPS        0xffff0000 | 
|  | #define OHCI_FMI_FIT          0x80000000 | 
|  |  | 
|  | #define OHCI_FR_RT            (1<<31) | 
|  |  | 
|  | #define OHCI_LS_THRESH        0x628 | 
|  |  | 
|  | #define OHCI_RHA_RW_MASK      0x00000000 /* Mask of supported features.  */ | 
|  | #define OHCI_RHA_PSM          (1<<8) | 
|  | #define OHCI_RHA_NPS          (1<<9) | 
|  | #define OHCI_RHA_DT           (1<<10) | 
|  | #define OHCI_RHA_OCPM         (1<<11) | 
|  | #define OHCI_RHA_NOCP         (1<<12) | 
|  | #define OHCI_RHA_POTPGT_MASK  0xff000000 | 
|  |  | 
|  | #define OHCI_RHS_LPS          (1<<0) | 
|  | #define OHCI_RHS_OCI          (1<<1) | 
|  | #define OHCI_RHS_DRWE         (1<<15) | 
|  | #define OHCI_RHS_LPSC         (1<<16) | 
|  | #define OHCI_RHS_OCIC         (1<<17) | 
|  | #define OHCI_RHS_CRWE         (1<<31) | 
|  |  | 
|  | #define OHCI_PORT_CCS         (1<<0) | 
|  | #define OHCI_PORT_PES         (1<<1) | 
|  | #define OHCI_PORT_PSS         (1<<2) | 
|  | #define OHCI_PORT_POCI        (1<<3) | 
|  | #define OHCI_PORT_PRS         (1<<4) | 
|  | #define OHCI_PORT_PPS         (1<<8) | 
|  | #define OHCI_PORT_LSDA        (1<<9) | 
|  | #define OHCI_PORT_CSC         (1<<16) | 
|  | #define OHCI_PORT_PESC        (1<<17) | 
|  | #define OHCI_PORT_PSSC        (1<<18) | 
|  | #define OHCI_PORT_OCIC        (1<<19) | 
|  | #define OHCI_PORT_PRSC        (1<<20) | 
|  | #define OHCI_PORT_WTC         (OHCI_PORT_CSC|OHCI_PORT_PESC|OHCI_PORT_PSSC \ | 
|  | |OHCI_PORT_OCIC|OHCI_PORT_PRSC) | 
|  |  | 
|  | #define OHCI_TD_DIR_SETUP     0x0 | 
|  | #define OHCI_TD_DIR_OUT       0x1 | 
|  | #define OHCI_TD_DIR_IN        0x2 | 
|  | #define OHCI_TD_DIR_RESERVED  0x3 | 
|  |  | 
|  | #define OHCI_CC_NOERROR             0x0 | 
|  | #define OHCI_CC_CRC                 0x1 | 
|  | #define OHCI_CC_BITSTUFFING         0x2 | 
|  | #define OHCI_CC_DATATOGGLEMISMATCH  0x3 | 
|  | #define OHCI_CC_STALL               0x4 | 
|  | #define OHCI_CC_DEVICENOTRESPONDING 0x5 | 
|  | #define OHCI_CC_PIDCHECKFAILURE     0x6 | 
|  | #define OHCI_CC_UNDEXPETEDPID       0x7 | 
|  | #define OHCI_CC_DATAOVERRUN         0x8 | 
|  | #define OHCI_CC_DATAUNDERRUN        0x9 | 
|  | #define OHCI_CC_BUFFEROVERRUN       0xc | 
|  | #define OHCI_CC_BUFFERUNDERRUN      0xd | 
|  |  | 
|  | #define OHCI_HRESET_FSBIR       (1 << 0) | 
|  |  | 
|  | /* Update IRQ levels */ | 
|  | static inline void ohci_intr_update(OHCIState *ohci) | 
|  | { | 
|  | int level = 0; | 
|  |  | 
|  | if ((ohci->intr & OHCI_INTR_MIE) && | 
|  | (ohci->intr_status & ohci->intr)) | 
|  | level = 1; | 
|  |  | 
|  | qemu_set_irq(ohci->irq, level); | 
|  | } | 
|  |  | 
|  | /* Set an interrupt */ | 
|  | static inline void ohci_set_interrupt(OHCIState *ohci, uint32_t intr) | 
|  | { | 
|  | ohci->intr_status |= intr; | 
|  | ohci_intr_update(ohci); | 
|  | } | 
|  |  | 
|  | /* Attach or detach a device on a root hub port.  */ | 
|  | static void ohci_attach(USBPort *port1) | 
|  | { | 
|  | OHCIState *s = port1->opaque; | 
|  | OHCIPort *port = &s->rhport[port1->index]; | 
|  | uint32_t old_state = port->ctrl; | 
|  |  | 
|  | /* set connect status */ | 
|  | port->ctrl |= OHCI_PORT_CCS | OHCI_PORT_CSC; | 
|  |  | 
|  | /* update speed */ | 
|  | if (port->port.dev->speed == USB_SPEED_LOW) { | 
|  | port->ctrl |= OHCI_PORT_LSDA; | 
|  | } else { | 
|  | port->ctrl &= ~OHCI_PORT_LSDA; | 
|  | } | 
|  |  | 
|  | /* notify of remote-wakeup */ | 
|  | if ((s->ctl & OHCI_CTL_HCFS) == OHCI_USB_SUSPEND) { | 
|  | ohci_set_interrupt(s, OHCI_INTR_RD); | 
|  | } | 
|  |  | 
|  | DPRINTF("usb-ohci: Attached port %d\n", port1->index); | 
|  |  | 
|  | if (old_state != port->ctrl) { | 
|  | ohci_set_interrupt(s, OHCI_INTR_RHSC); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void ohci_detach(USBPort *port1) | 
|  | { | 
|  | OHCIState *s = port1->opaque; | 
|  | OHCIPort *port = &s->rhport[port1->index]; | 
|  | uint32_t old_state = port->ctrl; | 
|  |  | 
|  | ohci_async_cancel_device(s, port1->dev); | 
|  |  | 
|  | /* set connect status */ | 
|  | if (port->ctrl & OHCI_PORT_CCS) { | 
|  | port->ctrl &= ~OHCI_PORT_CCS; | 
|  | port->ctrl |= OHCI_PORT_CSC; | 
|  | } | 
|  | /* disable port */ | 
|  | if (port->ctrl & OHCI_PORT_PES) { | 
|  | port->ctrl &= ~OHCI_PORT_PES; | 
|  | port->ctrl |= OHCI_PORT_PESC; | 
|  | } | 
|  | DPRINTF("usb-ohci: Detached port %d\n", port1->index); | 
|  |  | 
|  | if (old_state != port->ctrl) { | 
|  | ohci_set_interrupt(s, OHCI_INTR_RHSC); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void ohci_wakeup(USBPort *port1) | 
|  | { | 
|  | OHCIState *s = port1->opaque; | 
|  | OHCIPort *port = &s->rhport[port1->index]; | 
|  | uint32_t intr = 0; | 
|  | if (port->ctrl & OHCI_PORT_PSS) { | 
|  | DPRINTF("usb-ohci: port %d: wakeup\n", port1->index); | 
|  | port->ctrl |= OHCI_PORT_PSSC; | 
|  | port->ctrl &= ~OHCI_PORT_PSS; | 
|  | intr = OHCI_INTR_RHSC; | 
|  | } | 
|  | /* Note that the controller can be suspended even if this port is not */ | 
|  | if ((s->ctl & OHCI_CTL_HCFS) == OHCI_USB_SUSPEND) { | 
|  | DPRINTF("usb-ohci: remote-wakeup: SUSPEND->RESUME\n"); | 
|  | /* This is the one state transition the controller can do by itself */ | 
|  | s->ctl &= ~OHCI_CTL_HCFS; | 
|  | s->ctl |= OHCI_USB_RESUME; | 
|  | /* In suspend mode only ResumeDetected is possible, not RHSC: | 
|  | * see the OHCI spec 5.1.2.3. | 
|  | */ | 
|  | intr = OHCI_INTR_RD; | 
|  | } | 
|  | ohci_set_interrupt(s, intr); | 
|  | } | 
|  |  | 
|  | static void ohci_child_detach(USBPort *port1, USBDevice *child) | 
|  | { | 
|  | OHCIState *s = port1->opaque; | 
|  |  | 
|  | ohci_async_cancel_device(s, child); | 
|  | } | 
|  |  | 
|  | static USBDevice *ohci_find_device(OHCIState *ohci, uint8_t addr) | 
|  | { | 
|  | USBDevice *dev; | 
|  | int i; | 
|  |  | 
|  | for (i = 0; i < ohci->num_ports; i++) { | 
|  | if ((ohci->rhport[i].ctrl & OHCI_PORT_PES) == 0) { | 
|  | continue; | 
|  | } | 
|  | dev = usb_find_device(&ohci->rhport[i].port, addr); | 
|  | if (dev != NULL) { | 
|  | return dev; | 
|  | } | 
|  | } | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | /* Reset the controller */ | 
|  | static void ohci_reset(void *opaque) | 
|  | { | 
|  | OHCIState *ohci = opaque; | 
|  | OHCIPort *port; | 
|  | int i; | 
|  |  | 
|  | ohci_bus_stop(ohci); | 
|  | ohci->ctl = 0; | 
|  | ohci->old_ctl = 0; | 
|  | ohci->status = 0; | 
|  | ohci->intr_status = 0; | 
|  | ohci->intr = OHCI_INTR_MIE; | 
|  |  | 
|  | ohci->hcca = 0; | 
|  | ohci->ctrl_head = ohci->ctrl_cur = 0; | 
|  | ohci->bulk_head = ohci->bulk_cur = 0; | 
|  | ohci->per_cur = 0; | 
|  | ohci->done = 0; | 
|  | ohci->done_count = 7; | 
|  |  | 
|  | /* FSMPS is marked TBD in OCHI 1.0, what gives ffs? | 
|  | * I took the value linux sets ... | 
|  | */ | 
|  | ohci->fsmps = 0x2778; | 
|  | ohci->fi = 0x2edf; | 
|  | ohci->fit = 0; | 
|  | ohci->frt = 0; | 
|  | ohci->frame_number = 0; | 
|  | ohci->pstart = 0; | 
|  | ohci->lst = OHCI_LS_THRESH; | 
|  |  | 
|  | ohci->rhdesc_a = OHCI_RHA_NPS | ohci->num_ports; | 
|  | ohci->rhdesc_b = 0x0; /* Impl. specific */ | 
|  | ohci->rhstatus = 0; | 
|  |  | 
|  | for (i = 0; i < ohci->num_ports; i++) | 
|  | { | 
|  | port = &ohci->rhport[i]; | 
|  | port->ctrl = 0; | 
|  | if (port->port.dev && port->port.dev->attached) { | 
|  | usb_port_reset(&port->port); | 
|  | } | 
|  | } | 
|  | if (ohci->async_td) { | 
|  | usb_cancel_packet(&ohci->usb_packet); | 
|  | ohci->async_td = 0; | 
|  | } | 
|  | DPRINTF("usb-ohci: Reset %s\n", ohci->name); | 
|  | } | 
|  |  | 
|  | /* Get an array of dwords from main memory */ | 
|  | static inline int get_dwords(OHCIState *ohci, | 
|  | uint32_t addr, uint32_t *buf, int num) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | addr += ohci->localmem_base; | 
|  |  | 
|  | for (i = 0; i < num; i++, buf++, addr += sizeof(*buf)) { | 
|  | cpu_physical_memory_read(addr, buf, sizeof(*buf)); | 
|  | *buf = le32_to_cpu(*buf); | 
|  | } | 
|  |  | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | /* Put an array of dwords in to main memory */ | 
|  | static inline int put_dwords(OHCIState *ohci, | 
|  | uint32_t addr, uint32_t *buf, int num) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | addr += ohci->localmem_base; | 
|  |  | 
|  | for (i = 0; i < num; i++, buf++, addr += sizeof(*buf)) { | 
|  | uint32_t tmp = cpu_to_le32(*buf); | 
|  | cpu_physical_memory_write(addr, &tmp, sizeof(tmp)); | 
|  | } | 
|  |  | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | /* Get an array of words from main memory */ | 
|  | static inline int get_words(OHCIState *ohci, | 
|  | uint32_t addr, uint16_t *buf, int num) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | addr += ohci->localmem_base; | 
|  |  | 
|  | for (i = 0; i < num; i++, buf++, addr += sizeof(*buf)) { | 
|  | cpu_physical_memory_read(addr, buf, sizeof(*buf)); | 
|  | *buf = le16_to_cpu(*buf); | 
|  | } | 
|  |  | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | /* Put an array of words in to main memory */ | 
|  | static inline int put_words(OHCIState *ohci, | 
|  | uint32_t addr, uint16_t *buf, int num) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | addr += ohci->localmem_base; | 
|  |  | 
|  | for (i = 0; i < num; i++, buf++, addr += sizeof(*buf)) { | 
|  | uint16_t tmp = cpu_to_le16(*buf); | 
|  | cpu_physical_memory_write(addr, &tmp, sizeof(tmp)); | 
|  | } | 
|  |  | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | static inline int ohci_read_ed(OHCIState *ohci, | 
|  | uint32_t addr, struct ohci_ed *ed) | 
|  | { | 
|  | return get_dwords(ohci, addr, (uint32_t *)ed, sizeof(*ed) >> 2); | 
|  | } | 
|  |  | 
|  | static inline int ohci_read_td(OHCIState *ohci, | 
|  | uint32_t addr, struct ohci_td *td) | 
|  | { | 
|  | return get_dwords(ohci, addr, (uint32_t *)td, sizeof(*td) >> 2); | 
|  | } | 
|  |  | 
|  | static inline int ohci_read_iso_td(OHCIState *ohci, | 
|  | uint32_t addr, struct ohci_iso_td *td) | 
|  | { | 
|  | return (get_dwords(ohci, addr, (uint32_t *)td, 4) && | 
|  | get_words(ohci, addr + 16, td->offset, 8)); | 
|  | } | 
|  |  | 
|  | static inline int ohci_read_hcca(OHCIState *ohci, | 
|  | uint32_t addr, struct ohci_hcca *hcca) | 
|  | { | 
|  | cpu_physical_memory_read(addr + ohci->localmem_base, hcca, sizeof(*hcca)); | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | static inline int ohci_put_ed(OHCIState *ohci, | 
|  | uint32_t addr, struct ohci_ed *ed) | 
|  | { | 
|  | return put_dwords(ohci, addr, (uint32_t *)ed, sizeof(*ed) >> 2); | 
|  | } | 
|  |  | 
|  | static inline int ohci_put_td(OHCIState *ohci, | 
|  | uint32_t addr, struct ohci_td *td) | 
|  | { | 
|  | return put_dwords(ohci, addr, (uint32_t *)td, sizeof(*td) >> 2); | 
|  | } | 
|  |  | 
|  | static inline int ohci_put_iso_td(OHCIState *ohci, | 
|  | uint32_t addr, struct ohci_iso_td *td) | 
|  | { | 
|  | return (put_dwords(ohci, addr, (uint32_t *)td, 4) && | 
|  | put_words(ohci, addr + 16, td->offset, 8)); | 
|  | } | 
|  |  | 
|  | static inline int ohci_put_hcca(OHCIState *ohci, | 
|  | uint32_t addr, struct ohci_hcca *hcca) | 
|  | { | 
|  | cpu_physical_memory_write(addr + ohci->localmem_base, hcca, sizeof(*hcca)); | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | /* Read/Write the contents of a TD from/to main memory.  */ | 
|  | static void ohci_copy_td(OHCIState *ohci, struct ohci_td *td, | 
|  | uint8_t *buf, int len, int write) | 
|  | { | 
|  | uint32_t ptr; | 
|  | uint32_t n; | 
|  |  | 
|  | ptr = td->cbp; | 
|  | n = 0x1000 - (ptr & 0xfff); | 
|  | if (n > len) | 
|  | n = len; | 
|  | cpu_physical_memory_rw(ptr + ohci->localmem_base, buf, n, write); | 
|  | if (n == len) | 
|  | return; | 
|  | ptr = td->be & ~0xfffu; | 
|  | buf += n; | 
|  | cpu_physical_memory_rw(ptr + ohci->localmem_base, buf, len - n, write); | 
|  | } | 
|  |  | 
|  | /* Read/Write the contents of an ISO TD from/to main memory.  */ | 
|  | static void ohci_copy_iso_td(OHCIState *ohci, | 
|  | uint32_t start_addr, uint32_t end_addr, | 
|  | uint8_t *buf, int len, int write) | 
|  | { | 
|  | uint32_t ptr; | 
|  | uint32_t n; | 
|  |  | 
|  | ptr = start_addr; | 
|  | n = 0x1000 - (ptr & 0xfff); | 
|  | if (n > len) | 
|  | n = len; | 
|  | cpu_physical_memory_rw(ptr + ohci->localmem_base, buf, n, write); | 
|  | if (n == len) | 
|  | return; | 
|  | ptr = end_addr & ~0xfffu; | 
|  | buf += n; | 
|  | cpu_physical_memory_rw(ptr + ohci->localmem_base, buf, len - n, write); | 
|  | } | 
|  |  | 
|  | static void ohci_process_lists(OHCIState *ohci, int completion); | 
|  |  | 
|  | static void ohci_async_complete_packet(USBPort *port, USBPacket *packet) | 
|  | { | 
|  | OHCIState *ohci = container_of(packet, OHCIState, usb_packet); | 
|  | #ifdef DEBUG_PACKET | 
|  | DPRINTF("Async packet complete\n"); | 
|  | #endif | 
|  | ohci->async_complete = 1; | 
|  | ohci_process_lists(ohci, 1); | 
|  | } | 
|  |  | 
|  | #define USUB(a, b) ((int16_t)((uint16_t)(a) - (uint16_t)(b))) | 
|  |  | 
|  | static int ohci_service_iso_td(OHCIState *ohci, struct ohci_ed *ed, | 
|  | int completion) | 
|  | { | 
|  | int dir; | 
|  | size_t len = 0; | 
|  | #ifdef DEBUG_ISOCH | 
|  | const char *str = NULL; | 
|  | #endif | 
|  | int pid; | 
|  | int ret; | 
|  | int i; | 
|  | USBDevice *dev; | 
|  | USBEndpoint *ep; | 
|  | struct ohci_iso_td iso_td; | 
|  | uint32_t addr; | 
|  | uint16_t starting_frame; | 
|  | int16_t relative_frame_number; | 
|  | int frame_count; | 
|  | uint32_t start_offset, next_offset, end_offset = 0; | 
|  | uint32_t start_addr, end_addr; | 
|  |  | 
|  | addr = ed->head & OHCI_DPTR_MASK; | 
|  |  | 
|  | if (!ohci_read_iso_td(ohci, addr, &iso_td)) { | 
|  | printf("usb-ohci: ISO_TD read error at %x\n", addr); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | starting_frame = OHCI_BM(iso_td.flags, TD_SF); | 
|  | frame_count = OHCI_BM(iso_td.flags, TD_FC); | 
|  | relative_frame_number = USUB(ohci->frame_number, starting_frame); | 
|  |  | 
|  | #ifdef DEBUG_ISOCH | 
|  | printf("--- ISO_TD ED head 0x%.8x tailp 0x%.8x\n" | 
|  | "0x%.8x 0x%.8x 0x%.8x 0x%.8x\n" | 
|  | "0x%.8x 0x%.8x 0x%.8x 0x%.8x\n" | 
|  | "0x%.8x 0x%.8x 0x%.8x 0x%.8x\n" | 
|  | "frame_number 0x%.8x starting_frame 0x%.8x\n" | 
|  | "frame_count  0x%.8x relative %d\n" | 
|  | "di 0x%.8x cc 0x%.8x\n", | 
|  | ed->head & OHCI_DPTR_MASK, ed->tail & OHCI_DPTR_MASK, | 
|  | iso_td.flags, iso_td.bp, iso_td.next, iso_td.be, | 
|  | iso_td.offset[0], iso_td.offset[1], iso_td.offset[2], iso_td.offset[3], | 
|  | iso_td.offset[4], iso_td.offset[5], iso_td.offset[6], iso_td.offset[7], | 
|  | ohci->frame_number, starting_frame, | 
|  | frame_count, relative_frame_number, | 
|  | OHCI_BM(iso_td.flags, TD_DI), OHCI_BM(iso_td.flags, TD_CC)); | 
|  | #endif | 
|  |  | 
|  | if (relative_frame_number < 0) { | 
|  | DPRINTF("usb-ohci: ISO_TD R=%d < 0\n", relative_frame_number); | 
|  | return 1; | 
|  | } else if (relative_frame_number > frame_count) { | 
|  | /* ISO TD expired - retire the TD to the Done Queue and continue with | 
|  | the next ISO TD of the same ED */ | 
|  | DPRINTF("usb-ohci: ISO_TD R=%d > FC=%d\n", relative_frame_number, | 
|  | frame_count); | 
|  | OHCI_SET_BM(iso_td.flags, TD_CC, OHCI_CC_DATAOVERRUN); | 
|  | ed->head &= ~OHCI_DPTR_MASK; | 
|  | ed->head |= (iso_td.next & OHCI_DPTR_MASK); | 
|  | iso_td.next = ohci->done; | 
|  | ohci->done = addr; | 
|  | i = OHCI_BM(iso_td.flags, TD_DI); | 
|  | if (i < ohci->done_count) | 
|  | ohci->done_count = i; | 
|  | ohci_put_iso_td(ohci, addr, &iso_td); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | dir = OHCI_BM(ed->flags, ED_D); | 
|  | switch (dir) { | 
|  | case OHCI_TD_DIR_IN: | 
|  | #ifdef DEBUG_ISOCH | 
|  | str = "in"; | 
|  | #endif | 
|  | pid = USB_TOKEN_IN; | 
|  | break; | 
|  | case OHCI_TD_DIR_OUT: | 
|  | #ifdef DEBUG_ISOCH | 
|  | str = "out"; | 
|  | #endif | 
|  | pid = USB_TOKEN_OUT; | 
|  | break; | 
|  | case OHCI_TD_DIR_SETUP: | 
|  | #ifdef DEBUG_ISOCH | 
|  | str = "setup"; | 
|  | #endif | 
|  | pid = USB_TOKEN_SETUP; | 
|  | break; | 
|  | default: | 
|  | printf("usb-ohci: Bad direction %d\n", dir); | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | if (!iso_td.bp || !iso_td.be) { | 
|  | printf("usb-ohci: ISO_TD bp 0x%.8x be 0x%.8x\n", iso_td.bp, iso_td.be); | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | start_offset = iso_td.offset[relative_frame_number]; | 
|  | next_offset = iso_td.offset[relative_frame_number + 1]; | 
|  |  | 
|  | if (!(OHCI_BM(start_offset, TD_PSW_CC) & 0xe) || | 
|  | ((relative_frame_number < frame_count) && | 
|  | !(OHCI_BM(next_offset, TD_PSW_CC) & 0xe))) { | 
|  | printf("usb-ohci: ISO_TD cc != not accessed 0x%.8x 0x%.8x\n", | 
|  | start_offset, next_offset); | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | if ((relative_frame_number < frame_count) && (start_offset > next_offset)) { | 
|  | printf("usb-ohci: ISO_TD start_offset=0x%.8x > next_offset=0x%.8x\n", | 
|  | start_offset, next_offset); | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | if ((start_offset & 0x1000) == 0) { | 
|  | start_addr = (iso_td.bp & OHCI_PAGE_MASK) | | 
|  | (start_offset & OHCI_OFFSET_MASK); | 
|  | } else { | 
|  | start_addr = (iso_td.be & OHCI_PAGE_MASK) | | 
|  | (start_offset & OHCI_OFFSET_MASK); | 
|  | } | 
|  |  | 
|  | if (relative_frame_number < frame_count) { | 
|  | end_offset = next_offset - 1; | 
|  | if ((end_offset & 0x1000) == 0) { | 
|  | end_addr = (iso_td.bp & OHCI_PAGE_MASK) | | 
|  | (end_offset & OHCI_OFFSET_MASK); | 
|  | } else { | 
|  | end_addr = (iso_td.be & OHCI_PAGE_MASK) | | 
|  | (end_offset & OHCI_OFFSET_MASK); | 
|  | } | 
|  | } else { | 
|  | /* Last packet in the ISO TD */ | 
|  | end_addr = iso_td.be; | 
|  | } | 
|  |  | 
|  | if ((start_addr & OHCI_PAGE_MASK) != (end_addr & OHCI_PAGE_MASK)) { | 
|  | len = (end_addr & OHCI_OFFSET_MASK) + 0x1001 | 
|  | - (start_addr & OHCI_OFFSET_MASK); | 
|  | } else { | 
|  | len = end_addr - start_addr + 1; | 
|  | } | 
|  |  | 
|  | if (len && dir != OHCI_TD_DIR_IN) { | 
|  | ohci_copy_iso_td(ohci, start_addr, end_addr, ohci->usb_buf, len, 0); | 
|  | } | 
|  |  | 
|  | if (completion) { | 
|  | ret = ohci->usb_packet.result; | 
|  | } else { | 
|  | dev = ohci_find_device(ohci, OHCI_BM(ed->flags, ED_FA)); | 
|  | ep = usb_ep_get(dev, pid, OHCI_BM(ed->flags, ED_EN)); | 
|  | usb_packet_setup(&ohci->usb_packet, pid, ep); | 
|  | usb_packet_addbuf(&ohci->usb_packet, ohci->usb_buf, len); | 
|  | ret = usb_handle_packet(dev, &ohci->usb_packet); | 
|  | if (ret == USB_RET_ASYNC) { | 
|  | return 1; | 
|  | } | 
|  | } | 
|  |  | 
|  | #ifdef DEBUG_ISOCH | 
|  | printf("so 0x%.8x eo 0x%.8x\nsa 0x%.8x ea 0x%.8x\ndir %s len %zu ret %d\n", | 
|  | start_offset, end_offset, start_addr, end_addr, str, len, ret); | 
|  | #endif | 
|  |  | 
|  | /* Writeback */ | 
|  | if (dir == OHCI_TD_DIR_IN && ret >= 0 && ret <= len) { | 
|  | /* IN transfer succeeded */ | 
|  | ohci_copy_iso_td(ohci, start_addr, end_addr, ohci->usb_buf, ret, 1); | 
|  | OHCI_SET_BM(iso_td.offset[relative_frame_number], TD_PSW_CC, | 
|  | OHCI_CC_NOERROR); | 
|  | OHCI_SET_BM(iso_td.offset[relative_frame_number], TD_PSW_SIZE, ret); | 
|  | } else if (dir == OHCI_TD_DIR_OUT && ret == len) { | 
|  | /* OUT transfer succeeded */ | 
|  | OHCI_SET_BM(iso_td.offset[relative_frame_number], TD_PSW_CC, | 
|  | OHCI_CC_NOERROR); | 
|  | OHCI_SET_BM(iso_td.offset[relative_frame_number], TD_PSW_SIZE, 0); | 
|  | } else { | 
|  | if (ret > (ssize_t) len) { | 
|  | printf("usb-ohci: DataOverrun %d > %zu\n", ret, len); | 
|  | OHCI_SET_BM(iso_td.offset[relative_frame_number], TD_PSW_CC, | 
|  | OHCI_CC_DATAOVERRUN); | 
|  | OHCI_SET_BM(iso_td.offset[relative_frame_number], TD_PSW_SIZE, | 
|  | len); | 
|  | } else if (ret >= 0) { | 
|  | printf("usb-ohci: DataUnderrun %d\n", ret); | 
|  | OHCI_SET_BM(iso_td.offset[relative_frame_number], TD_PSW_CC, | 
|  | OHCI_CC_DATAUNDERRUN); | 
|  | } else { | 
|  | switch (ret) { | 
|  | case USB_RET_NODEV: | 
|  | OHCI_SET_BM(iso_td.offset[relative_frame_number], TD_PSW_CC, | 
|  | OHCI_CC_DEVICENOTRESPONDING); | 
|  | OHCI_SET_BM(iso_td.offset[relative_frame_number], TD_PSW_SIZE, | 
|  | 0); | 
|  | break; | 
|  | case USB_RET_NAK: | 
|  | case USB_RET_STALL: | 
|  | printf("usb-ohci: got NAK/STALL %d\n", ret); | 
|  | OHCI_SET_BM(iso_td.offset[relative_frame_number], TD_PSW_CC, | 
|  | OHCI_CC_STALL); | 
|  | OHCI_SET_BM(iso_td.offset[relative_frame_number], TD_PSW_SIZE, | 
|  | 0); | 
|  | break; | 
|  | default: | 
|  | printf("usb-ohci: Bad device response %d\n", ret); | 
|  | OHCI_SET_BM(iso_td.offset[relative_frame_number], TD_PSW_CC, | 
|  | OHCI_CC_UNDEXPETEDPID); | 
|  | break; | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | if (relative_frame_number == frame_count) { | 
|  | /* Last data packet of ISO TD - retire the TD to the Done Queue */ | 
|  | OHCI_SET_BM(iso_td.flags, TD_CC, OHCI_CC_NOERROR); | 
|  | ed->head &= ~OHCI_DPTR_MASK; | 
|  | ed->head |= (iso_td.next & OHCI_DPTR_MASK); | 
|  | iso_td.next = ohci->done; | 
|  | ohci->done = addr; | 
|  | i = OHCI_BM(iso_td.flags, TD_DI); | 
|  | if (i < ohci->done_count) | 
|  | ohci->done_count = i; | 
|  | } | 
|  | ohci_put_iso_td(ohci, addr, &iso_td); | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | /* Service a transport descriptor. | 
|  | Returns nonzero to terminate processing of this endpoint.  */ | 
|  |  | 
|  | static int ohci_service_td(OHCIState *ohci, struct ohci_ed *ed) | 
|  | { | 
|  | int dir; | 
|  | size_t len = 0, pktlen = 0; | 
|  | #ifdef DEBUG_PACKET | 
|  | const char *str = NULL; | 
|  | #endif | 
|  | int pid; | 
|  | int ret; | 
|  | int i; | 
|  | USBDevice *dev; | 
|  | USBEndpoint *ep; | 
|  | struct ohci_td td; | 
|  | uint32_t addr; | 
|  | int flag_r; | 
|  | int completion; | 
|  |  | 
|  | addr = ed->head & OHCI_DPTR_MASK; | 
|  | /* See if this TD has already been submitted to the device.  */ | 
|  | completion = (addr == ohci->async_td); | 
|  | if (completion && !ohci->async_complete) { | 
|  | #ifdef DEBUG_PACKET | 
|  | DPRINTF("Skipping async TD\n"); | 
|  | #endif | 
|  | return 1; | 
|  | } | 
|  | if (!ohci_read_td(ohci, addr, &td)) { | 
|  | fprintf(stderr, "usb-ohci: TD read error at %x\n", addr); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | dir = OHCI_BM(ed->flags, ED_D); | 
|  | switch (dir) { | 
|  | case OHCI_TD_DIR_OUT: | 
|  | case OHCI_TD_DIR_IN: | 
|  | /* Same value.  */ | 
|  | break; | 
|  | default: | 
|  | dir = OHCI_BM(td.flags, TD_DP); | 
|  | break; | 
|  | } | 
|  |  | 
|  | switch (dir) { | 
|  | case OHCI_TD_DIR_IN: | 
|  | #ifdef DEBUG_PACKET | 
|  | str = "in"; | 
|  | #endif | 
|  | pid = USB_TOKEN_IN; | 
|  | break; | 
|  | case OHCI_TD_DIR_OUT: | 
|  | #ifdef DEBUG_PACKET | 
|  | str = "out"; | 
|  | #endif | 
|  | pid = USB_TOKEN_OUT; | 
|  | break; | 
|  | case OHCI_TD_DIR_SETUP: | 
|  | #ifdef DEBUG_PACKET | 
|  | str = "setup"; | 
|  | #endif | 
|  | pid = USB_TOKEN_SETUP; | 
|  | break; | 
|  | default: | 
|  | fprintf(stderr, "usb-ohci: Bad direction\n"); | 
|  | return 1; | 
|  | } | 
|  | if (td.cbp && td.be) { | 
|  | if ((td.cbp & 0xfffff000) != (td.be & 0xfffff000)) { | 
|  | len = (td.be & 0xfff) + 0x1001 - (td.cbp & 0xfff); | 
|  | } else { | 
|  | len = (td.be - td.cbp) + 1; | 
|  | } | 
|  |  | 
|  | pktlen = len; | 
|  | if (len && dir != OHCI_TD_DIR_IN) { | 
|  | /* The endpoint may not allow us to transfer it all now */ | 
|  | pktlen = (ed->flags & OHCI_ED_MPS_MASK) >> OHCI_ED_MPS_SHIFT; | 
|  | if (pktlen > len) { | 
|  | pktlen = len; | 
|  | } | 
|  | if (!completion) { | 
|  | ohci_copy_td(ohci, &td, ohci->usb_buf, pktlen, 0); | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | flag_r = (td.flags & OHCI_TD_R) != 0; | 
|  | #ifdef DEBUG_PACKET | 
|  | DPRINTF(" TD @ 0x%.8x %" PRId64 " of %" PRId64 | 
|  | " bytes %s r=%d cbp=0x%.8x be=0x%.8x\n", | 
|  | addr, (int64_t)pktlen, (int64_t)len, str, flag_r, td.cbp, td.be); | 
|  |  | 
|  | if (pktlen > 0 && dir != OHCI_TD_DIR_IN) { | 
|  | DPRINTF("  data:"); | 
|  | for (i = 0; i < pktlen; i++) { | 
|  | printf(" %.2x", ohci->usb_buf[i]); | 
|  | } | 
|  | DPRINTF("\n"); | 
|  | } | 
|  | #endif | 
|  | if (completion) { | 
|  | ret = ohci->usb_packet.result; | 
|  | ohci->async_td = 0; | 
|  | ohci->async_complete = 0; | 
|  | } else { | 
|  | if (ohci->async_td) { | 
|  | /* ??? The hardware should allow one active packet per | 
|  | endpoint.  We only allow one active packet per controller. | 
|  | This should be sufficient as long as devices respond in a | 
|  | timely manner. | 
|  | */ | 
|  | #ifdef DEBUG_PACKET | 
|  | DPRINTF("Too many pending packets\n"); | 
|  | #endif | 
|  | return 1; | 
|  | } | 
|  | dev = ohci_find_device(ohci, OHCI_BM(ed->flags, ED_FA)); | 
|  | ep = usb_ep_get(dev, pid, OHCI_BM(ed->flags, ED_EN)); | 
|  | usb_packet_setup(&ohci->usb_packet, pid, ep); | 
|  | usb_packet_addbuf(&ohci->usb_packet, ohci->usb_buf, pktlen); | 
|  | ret = usb_handle_packet(dev, &ohci->usb_packet); | 
|  | #ifdef DEBUG_PACKET | 
|  | DPRINTF("ret=%d\n", ret); | 
|  | #endif | 
|  | if (ret == USB_RET_ASYNC) { | 
|  | ohci->async_td = addr; | 
|  | return 1; | 
|  | } | 
|  | } | 
|  | if (ret >= 0) { | 
|  | if (dir == OHCI_TD_DIR_IN) { | 
|  | ohci_copy_td(ohci, &td, ohci->usb_buf, ret, 1); | 
|  | #ifdef DEBUG_PACKET | 
|  | DPRINTF("  data:"); | 
|  | for (i = 0; i < ret; i++) | 
|  | printf(" %.2x", ohci->usb_buf[i]); | 
|  | DPRINTF("\n"); | 
|  | #endif | 
|  | } else { | 
|  | ret = pktlen; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* Writeback */ | 
|  | if (ret == pktlen || (dir == OHCI_TD_DIR_IN && ret >= 0 && flag_r)) { | 
|  | /* Transmission succeeded.  */ | 
|  | if (ret == len) { | 
|  | td.cbp = 0; | 
|  | } else { | 
|  | if ((td.cbp & 0xfff) + ret > 0xfff) { | 
|  | td.cbp = (td.be & ~0xfff) + ((td.cbp + ret) & 0xfff); | 
|  | } else { | 
|  | td.cbp += ret; | 
|  | } | 
|  | } | 
|  | td.flags |= OHCI_TD_T1; | 
|  | td.flags ^= OHCI_TD_T0; | 
|  | OHCI_SET_BM(td.flags, TD_CC, OHCI_CC_NOERROR); | 
|  | OHCI_SET_BM(td.flags, TD_EC, 0); | 
|  |  | 
|  | if ((dir != OHCI_TD_DIR_IN) && (ret != len)) { | 
|  | /* Partial packet transfer: TD not ready to retire yet */ | 
|  | goto exit_no_retire; | 
|  | } | 
|  |  | 
|  | /* Setting ED_C is part of the TD retirement process */ | 
|  | ed->head &= ~OHCI_ED_C; | 
|  | if (td.flags & OHCI_TD_T0) | 
|  | ed->head |= OHCI_ED_C; | 
|  | } else { | 
|  | if (ret >= 0) { | 
|  | DPRINTF("usb-ohci: Underrun\n"); | 
|  | OHCI_SET_BM(td.flags, TD_CC, OHCI_CC_DATAUNDERRUN); | 
|  | } else { | 
|  | switch (ret) { | 
|  | case USB_RET_NODEV: | 
|  | OHCI_SET_BM(td.flags, TD_CC, OHCI_CC_DEVICENOTRESPONDING); | 
|  | case USB_RET_NAK: | 
|  | DPRINTF("usb-ohci: got NAK\n"); | 
|  | return 1; | 
|  | case USB_RET_STALL: | 
|  | DPRINTF("usb-ohci: got STALL\n"); | 
|  | OHCI_SET_BM(td.flags, TD_CC, OHCI_CC_STALL); | 
|  | break; | 
|  | case USB_RET_BABBLE: | 
|  | DPRINTF("usb-ohci: got BABBLE\n"); | 
|  | OHCI_SET_BM(td.flags, TD_CC, OHCI_CC_DATAOVERRUN); | 
|  | break; | 
|  | default: | 
|  | fprintf(stderr, "usb-ohci: Bad device response %d\n", ret); | 
|  | OHCI_SET_BM(td.flags, TD_CC, OHCI_CC_UNDEXPETEDPID); | 
|  | OHCI_SET_BM(td.flags, TD_EC, 3); | 
|  | break; | 
|  | } | 
|  | } | 
|  | ed->head |= OHCI_ED_H; | 
|  | } | 
|  |  | 
|  | /* Retire this TD */ | 
|  | ed->head &= ~OHCI_DPTR_MASK; | 
|  | ed->head |= td.next & OHCI_DPTR_MASK; | 
|  | td.next = ohci->done; | 
|  | ohci->done = addr; | 
|  | i = OHCI_BM(td.flags, TD_DI); | 
|  | if (i < ohci->done_count) | 
|  | ohci->done_count = i; | 
|  | exit_no_retire: | 
|  | ohci_put_td(ohci, addr, &td); | 
|  | return OHCI_BM(td.flags, TD_CC) != OHCI_CC_NOERROR; | 
|  | } | 
|  |  | 
|  | /* Service an endpoint list.  Returns nonzero if active TD were found.  */ | 
|  | static int ohci_service_ed_list(OHCIState *ohci, uint32_t head, int completion) | 
|  | { | 
|  | struct ohci_ed ed; | 
|  | uint32_t next_ed; | 
|  | uint32_t cur; | 
|  | int active; | 
|  |  | 
|  | active = 0; | 
|  |  | 
|  | if (head == 0) | 
|  | return 0; | 
|  |  | 
|  | for (cur = head; cur; cur = next_ed) { | 
|  | if (!ohci_read_ed(ohci, cur, &ed)) { | 
|  | fprintf(stderr, "usb-ohci: ED read error at %x\n", cur); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | next_ed = ed.next & OHCI_DPTR_MASK; | 
|  |  | 
|  | if ((ed.head & OHCI_ED_H) || (ed.flags & OHCI_ED_K)) { | 
|  | uint32_t addr; | 
|  | /* Cancel pending packets for ED that have been paused.  */ | 
|  | addr = ed.head & OHCI_DPTR_MASK; | 
|  | if (ohci->async_td && addr == ohci->async_td) { | 
|  | usb_cancel_packet(&ohci->usb_packet); | 
|  | ohci->async_td = 0; | 
|  | } | 
|  | continue; | 
|  | } | 
|  |  | 
|  | while ((ed.head & OHCI_DPTR_MASK) != ed.tail) { | 
|  | #ifdef DEBUG_PACKET | 
|  | DPRINTF("ED @ 0x%.8x fa=%u en=%u d=%u s=%u k=%u f=%u mps=%u " | 
|  | "h=%u c=%u\n  head=0x%.8x tailp=0x%.8x next=0x%.8x\n", cur, | 
|  | OHCI_BM(ed.flags, ED_FA), OHCI_BM(ed.flags, ED_EN), | 
|  | OHCI_BM(ed.flags, ED_D), (ed.flags & OHCI_ED_S)!= 0, | 
|  | (ed.flags & OHCI_ED_K) != 0, (ed.flags & OHCI_ED_F) != 0, | 
|  | OHCI_BM(ed.flags, ED_MPS), (ed.head & OHCI_ED_H) != 0, | 
|  | (ed.head & OHCI_ED_C) != 0, ed.head & OHCI_DPTR_MASK, | 
|  | ed.tail & OHCI_DPTR_MASK, ed.next & OHCI_DPTR_MASK); | 
|  | #endif | 
|  | active = 1; | 
|  |  | 
|  | if ((ed.flags & OHCI_ED_F) == 0) { | 
|  | if (ohci_service_td(ohci, &ed)) | 
|  | break; | 
|  | } else { | 
|  | /* Handle isochronous endpoints */ | 
|  | if (ohci_service_iso_td(ohci, &ed, completion)) | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | ohci_put_ed(ohci, cur, &ed); | 
|  | } | 
|  |  | 
|  | return active; | 
|  | } | 
|  |  | 
|  | /* Generate a SOF event, and set a timer for EOF */ | 
|  | static void ohci_sof(OHCIState *ohci) | 
|  | { | 
|  | ohci->sof_time = qemu_get_clock_ns(vm_clock); | 
|  | qemu_mod_timer(ohci->eof_timer, ohci->sof_time + usb_frame_time); | 
|  | ohci_set_interrupt(ohci, OHCI_INTR_SF); | 
|  | } | 
|  |  | 
|  | /* Process Control and Bulk lists.  */ | 
|  | static void ohci_process_lists(OHCIState *ohci, int completion) | 
|  | { | 
|  | if ((ohci->ctl & OHCI_CTL_CLE) && (ohci->status & OHCI_STATUS_CLF)) { | 
|  | if (ohci->ctrl_cur && ohci->ctrl_cur != ohci->ctrl_head) { | 
|  | DPRINTF("usb-ohci: head %x, cur %x\n", | 
|  | ohci->ctrl_head, ohci->ctrl_cur); | 
|  | } | 
|  | if (!ohci_service_ed_list(ohci, ohci->ctrl_head, completion)) { | 
|  | ohci->ctrl_cur = 0; | 
|  | ohci->status &= ~OHCI_STATUS_CLF; | 
|  | } | 
|  | } | 
|  |  | 
|  | if ((ohci->ctl & OHCI_CTL_BLE) && (ohci->status & OHCI_STATUS_BLF)) { | 
|  | if (!ohci_service_ed_list(ohci, ohci->bulk_head, completion)) { | 
|  | ohci->bulk_cur = 0; | 
|  | ohci->status &= ~OHCI_STATUS_BLF; | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | /* Do frame processing on frame boundary */ | 
|  | static void ohci_frame_boundary(void *opaque) | 
|  | { | 
|  | OHCIState *ohci = opaque; | 
|  | struct ohci_hcca hcca; | 
|  |  | 
|  | ohci_read_hcca(ohci, ohci->hcca, &hcca); | 
|  |  | 
|  | /* Process all the lists at the end of the frame */ | 
|  | if (ohci->ctl & OHCI_CTL_PLE) { | 
|  | int n; | 
|  |  | 
|  | n = ohci->frame_number & 0x1f; | 
|  | ohci_service_ed_list(ohci, le32_to_cpu(hcca.intr[n]), 0); | 
|  | } | 
|  |  | 
|  | /* Cancel all pending packets if either of the lists has been disabled.  */ | 
|  | if (ohci->async_td && | 
|  | ohci->old_ctl & (~ohci->ctl) & (OHCI_CTL_BLE | OHCI_CTL_CLE)) { | 
|  | usb_cancel_packet(&ohci->usb_packet); | 
|  | ohci->async_td = 0; | 
|  | } | 
|  | ohci->old_ctl = ohci->ctl; | 
|  | ohci_process_lists(ohci, 0); | 
|  |  | 
|  | /* Frame boundary, so do EOF stuf here */ | 
|  | ohci->frt = ohci->fit; | 
|  |  | 
|  | /* Increment frame number and take care of endianness. */ | 
|  | ohci->frame_number = (ohci->frame_number + 1) & 0xffff; | 
|  | hcca.frame = cpu_to_le16(ohci->frame_number); | 
|  |  | 
|  | if (ohci->done_count == 0 && !(ohci->intr_status & OHCI_INTR_WD)) { | 
|  | if (!ohci->done) | 
|  | abort(); | 
|  | if (ohci->intr & ohci->intr_status) | 
|  | ohci->done |= 1; | 
|  | hcca.done = cpu_to_le32(ohci->done); | 
|  | ohci->done = 0; | 
|  | ohci->done_count = 7; | 
|  | ohci_set_interrupt(ohci, OHCI_INTR_WD); | 
|  | } | 
|  |  | 
|  | if (ohci->done_count != 7 && ohci->done_count != 0) | 
|  | ohci->done_count--; | 
|  |  | 
|  | /* Do SOF stuff here */ | 
|  | ohci_sof(ohci); | 
|  |  | 
|  | /* Writeback HCCA */ | 
|  | ohci_put_hcca(ohci, ohci->hcca, &hcca); | 
|  | } | 
|  |  | 
|  | /* Start sending SOF tokens across the USB bus, lists are processed in | 
|  | * next frame | 
|  | */ | 
|  | static int ohci_bus_start(OHCIState *ohci) | 
|  | { | 
|  | ohci->eof_timer = qemu_new_timer_ns(vm_clock, | 
|  | ohci_frame_boundary, | 
|  | ohci); | 
|  |  | 
|  | if (ohci->eof_timer == NULL) { | 
|  | fprintf(stderr, "usb-ohci: %s: qemu_new_timer_ns failed\n", ohci->name); | 
|  | /* TODO: Signal unrecoverable error */ | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | DPRINTF("usb-ohci: %s: USB Operational\n", ohci->name); | 
|  |  | 
|  | ohci_sof(ohci); | 
|  |  | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | /* Stop sending SOF tokens on the bus */ | 
|  | static void ohci_bus_stop(OHCIState *ohci) | 
|  | { | 
|  | if (ohci->eof_timer) | 
|  | qemu_del_timer(ohci->eof_timer); | 
|  | ohci->eof_timer = NULL; | 
|  | } | 
|  |  | 
|  | /* Sets a flag in a port status register but only set it if the port is | 
|  | * connected, if not set ConnectStatusChange flag. If flag is enabled | 
|  | * return 1. | 
|  | */ | 
|  | static int ohci_port_set_if_connected(OHCIState *ohci, int i, uint32_t val) | 
|  | { | 
|  | int ret = 1; | 
|  |  | 
|  | /* writing a 0 has no effect */ | 
|  | if (val == 0) | 
|  | return 0; | 
|  |  | 
|  | /* If CurrentConnectStatus is cleared we set | 
|  | * ConnectStatusChange | 
|  | */ | 
|  | if (!(ohci->rhport[i].ctrl & OHCI_PORT_CCS)) { | 
|  | ohci->rhport[i].ctrl |= OHCI_PORT_CSC; | 
|  | if (ohci->rhstatus & OHCI_RHS_DRWE) { | 
|  | /* TODO: CSC is a wakeup event */ | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | if (ohci->rhport[i].ctrl & val) | 
|  | ret = 0; | 
|  |  | 
|  | /* set the bit */ | 
|  | ohci->rhport[i].ctrl |= val; | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* Set the frame interval - frame interval toggle is manipulated by the hcd only */ | 
|  | static void ohci_set_frame_interval(OHCIState *ohci, uint16_t val) | 
|  | { | 
|  | val &= OHCI_FMI_FI; | 
|  |  | 
|  | if (val != ohci->fi) { | 
|  | DPRINTF("usb-ohci: %s: FrameInterval = 0x%x (%u)\n", | 
|  | ohci->name, ohci->fi, ohci->fi); | 
|  | } | 
|  |  | 
|  | ohci->fi = val; | 
|  | } | 
|  |  | 
|  | static void ohci_port_power(OHCIState *ohci, int i, int p) | 
|  | { | 
|  | if (p) { | 
|  | ohci->rhport[i].ctrl |= OHCI_PORT_PPS; | 
|  | } else { | 
|  | ohci->rhport[i].ctrl &= ~(OHCI_PORT_PPS| | 
|  | OHCI_PORT_CCS| | 
|  | OHCI_PORT_PSS| | 
|  | OHCI_PORT_PRS); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* Set HcControlRegister */ | 
|  | static void ohci_set_ctl(OHCIState *ohci, uint32_t val) | 
|  | { | 
|  | uint32_t old_state; | 
|  | uint32_t new_state; | 
|  |  | 
|  | old_state = ohci->ctl & OHCI_CTL_HCFS; | 
|  | ohci->ctl = val; | 
|  | new_state = ohci->ctl & OHCI_CTL_HCFS; | 
|  |  | 
|  | /* no state change */ | 
|  | if (old_state == new_state) | 
|  | return; | 
|  |  | 
|  | switch (new_state) { | 
|  | case OHCI_USB_OPERATIONAL: | 
|  | ohci_bus_start(ohci); | 
|  | break; | 
|  | case OHCI_USB_SUSPEND: | 
|  | ohci_bus_stop(ohci); | 
|  | DPRINTF("usb-ohci: %s: USB Suspended\n", ohci->name); | 
|  | break; | 
|  | case OHCI_USB_RESUME: | 
|  | DPRINTF("usb-ohci: %s: USB Resume\n", ohci->name); | 
|  | break; | 
|  | case OHCI_USB_RESET: | 
|  | ohci_reset(ohci); | 
|  | DPRINTF("usb-ohci: %s: USB Reset\n", ohci->name); | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | static uint32_t ohci_get_frame_remaining(OHCIState *ohci) | 
|  | { | 
|  | uint16_t fr; | 
|  | int64_t tks; | 
|  |  | 
|  | if ((ohci->ctl & OHCI_CTL_HCFS) != OHCI_USB_OPERATIONAL) | 
|  | return (ohci->frt << 31); | 
|  |  | 
|  | /* Being in USB operational state guarnatees sof_time was | 
|  | * set already. | 
|  | */ | 
|  | tks = qemu_get_clock_ns(vm_clock) - ohci->sof_time; | 
|  |  | 
|  | /* avoid muldiv if possible */ | 
|  | if (tks >= usb_frame_time) | 
|  | return (ohci->frt << 31); | 
|  |  | 
|  | tks = muldiv64(1, tks, usb_bit_time); | 
|  | fr = (uint16_t)(ohci->fi - tks); | 
|  |  | 
|  | return (ohci->frt << 31) | fr; | 
|  | } | 
|  |  | 
|  |  | 
|  | /* Set root hub status */ | 
|  | static void ohci_set_hub_status(OHCIState *ohci, uint32_t val) | 
|  | { | 
|  | uint32_t old_state; | 
|  |  | 
|  | old_state = ohci->rhstatus; | 
|  |  | 
|  | /* write 1 to clear OCIC */ | 
|  | if (val & OHCI_RHS_OCIC) | 
|  | ohci->rhstatus &= ~OHCI_RHS_OCIC; | 
|  |  | 
|  | if (val & OHCI_RHS_LPS) { | 
|  | int i; | 
|  |  | 
|  | for (i = 0; i < ohci->num_ports; i++) | 
|  | ohci_port_power(ohci, i, 0); | 
|  | DPRINTF("usb-ohci: powered down all ports\n"); | 
|  | } | 
|  |  | 
|  | if (val & OHCI_RHS_LPSC) { | 
|  | int i; | 
|  |  | 
|  | for (i = 0; i < ohci->num_ports; i++) | 
|  | ohci_port_power(ohci, i, 1); | 
|  | DPRINTF("usb-ohci: powered up all ports\n"); | 
|  | } | 
|  |  | 
|  | if (val & OHCI_RHS_DRWE) | 
|  | ohci->rhstatus |= OHCI_RHS_DRWE; | 
|  |  | 
|  | if (val & OHCI_RHS_CRWE) | 
|  | ohci->rhstatus &= ~OHCI_RHS_DRWE; | 
|  |  | 
|  | if (old_state != ohci->rhstatus) | 
|  | ohci_set_interrupt(ohci, OHCI_INTR_RHSC); | 
|  | } | 
|  |  | 
|  | /* Set root hub port status */ | 
|  | static void ohci_port_set_status(OHCIState *ohci, int portnum, uint32_t val) | 
|  | { | 
|  | uint32_t old_state; | 
|  | OHCIPort *port; | 
|  |  | 
|  | port = &ohci->rhport[portnum]; | 
|  | old_state = port->ctrl; | 
|  |  | 
|  | /* Write to clear CSC, PESC, PSSC, OCIC, PRSC */ | 
|  | if (val & OHCI_PORT_WTC) | 
|  | port->ctrl &= ~(val & OHCI_PORT_WTC); | 
|  |  | 
|  | if (val & OHCI_PORT_CCS) | 
|  | port->ctrl &= ~OHCI_PORT_PES; | 
|  |  | 
|  | ohci_port_set_if_connected(ohci, portnum, val & OHCI_PORT_PES); | 
|  |  | 
|  | if (ohci_port_set_if_connected(ohci, portnum, val & OHCI_PORT_PSS)) { | 
|  | DPRINTF("usb-ohci: port %d: SUSPEND\n", portnum); | 
|  | } | 
|  |  | 
|  | if (ohci_port_set_if_connected(ohci, portnum, val & OHCI_PORT_PRS)) { | 
|  | DPRINTF("usb-ohci: port %d: RESET\n", portnum); | 
|  | usb_device_reset(port->port.dev); | 
|  | port->ctrl &= ~OHCI_PORT_PRS; | 
|  | /* ??? Should this also set OHCI_PORT_PESC.  */ | 
|  | port->ctrl |= OHCI_PORT_PES | OHCI_PORT_PRSC; | 
|  | } | 
|  |  | 
|  | /* Invert order here to ensure in ambiguous case, device is | 
|  | * powered up... | 
|  | */ | 
|  | if (val & OHCI_PORT_LSDA) | 
|  | ohci_port_power(ohci, portnum, 0); | 
|  | if (val & OHCI_PORT_PPS) | 
|  | ohci_port_power(ohci, portnum, 1); | 
|  |  | 
|  | if (old_state != port->ctrl) | 
|  | ohci_set_interrupt(ohci, OHCI_INTR_RHSC); | 
|  |  | 
|  | return; | 
|  | } | 
|  |  | 
|  | static uint64_t ohci_mem_read(void *opaque, | 
|  | target_phys_addr_t addr, | 
|  | unsigned size) | 
|  | { | 
|  | OHCIState *ohci = opaque; | 
|  | uint32_t retval; | 
|  |  | 
|  | /* Only aligned reads are allowed on OHCI */ | 
|  | if (addr & 3) { | 
|  | fprintf(stderr, "usb-ohci: Mis-aligned read\n"); | 
|  | return 0xffffffff; | 
|  | } else if (addr >= 0x54 && addr < 0x54 + ohci->num_ports * 4) { | 
|  | /* HcRhPortStatus */ | 
|  | retval = ohci->rhport[(addr - 0x54) >> 2].ctrl | OHCI_PORT_PPS; | 
|  | } else { | 
|  | switch (addr >> 2) { | 
|  | case 0: /* HcRevision */ | 
|  | retval = 0x10; | 
|  | break; | 
|  |  | 
|  | case 1: /* HcControl */ | 
|  | retval = ohci->ctl; | 
|  | break; | 
|  |  | 
|  | case 2: /* HcCommandStatus */ | 
|  | retval = ohci->status; | 
|  | break; | 
|  |  | 
|  | case 3: /* HcInterruptStatus */ | 
|  | retval = ohci->intr_status; | 
|  | break; | 
|  |  | 
|  | case 4: /* HcInterruptEnable */ | 
|  | case 5: /* HcInterruptDisable */ | 
|  | retval = ohci->intr; | 
|  | break; | 
|  |  | 
|  | case 6: /* HcHCCA */ | 
|  | retval = ohci->hcca; | 
|  | break; | 
|  |  | 
|  | case 7: /* HcPeriodCurrentED */ | 
|  | retval = ohci->per_cur; | 
|  | break; | 
|  |  | 
|  | case 8: /* HcControlHeadED */ | 
|  | retval = ohci->ctrl_head; | 
|  | break; | 
|  |  | 
|  | case 9: /* HcControlCurrentED */ | 
|  | retval = ohci->ctrl_cur; | 
|  | break; | 
|  |  | 
|  | case 10: /* HcBulkHeadED */ | 
|  | retval = ohci->bulk_head; | 
|  | break; | 
|  |  | 
|  | case 11: /* HcBulkCurrentED */ | 
|  | retval = ohci->bulk_cur; | 
|  | break; | 
|  |  | 
|  | case 12: /* HcDoneHead */ | 
|  | retval = ohci->done; | 
|  | break; | 
|  |  | 
|  | case 13: /* HcFmInterretval */ | 
|  | retval = (ohci->fit << 31) | (ohci->fsmps << 16) | (ohci->fi); | 
|  | break; | 
|  |  | 
|  | case 14: /* HcFmRemaining */ | 
|  | retval = ohci_get_frame_remaining(ohci); | 
|  | break; | 
|  |  | 
|  | case 15: /* HcFmNumber */ | 
|  | retval = ohci->frame_number; | 
|  | break; | 
|  |  | 
|  | case 16: /* HcPeriodicStart */ | 
|  | retval = ohci->pstart; | 
|  | break; | 
|  |  | 
|  | case 17: /* HcLSThreshold */ | 
|  | retval = ohci->lst; | 
|  | break; | 
|  |  | 
|  | case 18: /* HcRhDescriptorA */ | 
|  | retval = ohci->rhdesc_a; | 
|  | break; | 
|  |  | 
|  | case 19: /* HcRhDescriptorB */ | 
|  | retval = ohci->rhdesc_b; | 
|  | break; | 
|  |  | 
|  | case 20: /* HcRhStatus */ | 
|  | retval = ohci->rhstatus; | 
|  | break; | 
|  |  | 
|  | /* PXA27x specific registers */ | 
|  | case 24: /* HcStatus */ | 
|  | retval = ohci->hstatus & ohci->hmask; | 
|  | break; | 
|  |  | 
|  | case 25: /* HcHReset */ | 
|  | retval = ohci->hreset; | 
|  | break; | 
|  |  | 
|  | case 26: /* HcHInterruptEnable */ | 
|  | retval = ohci->hmask; | 
|  | break; | 
|  |  | 
|  | case 27: /* HcHInterruptTest */ | 
|  | retval = ohci->htest; | 
|  | break; | 
|  |  | 
|  | default: | 
|  | fprintf(stderr, "ohci_read: Bad offset %x\n", (int)addr); | 
|  | retval = 0xffffffff; | 
|  | } | 
|  | } | 
|  |  | 
|  | return retval; | 
|  | } | 
|  |  | 
|  | static void ohci_mem_write(void *opaque, | 
|  | target_phys_addr_t addr, | 
|  | uint64_t val, | 
|  | unsigned size) | 
|  | { | 
|  | OHCIState *ohci = opaque; | 
|  |  | 
|  | /* Only aligned reads are allowed on OHCI */ | 
|  | if (addr & 3) { | 
|  | fprintf(stderr, "usb-ohci: Mis-aligned write\n"); | 
|  | return; | 
|  | } | 
|  |  | 
|  | if (addr >= 0x54 && addr < 0x54 + ohci->num_ports * 4) { | 
|  | /* HcRhPortStatus */ | 
|  | ohci_port_set_status(ohci, (addr - 0x54) >> 2, val); | 
|  | return; | 
|  | } | 
|  |  | 
|  | switch (addr >> 2) { | 
|  | case 1: /* HcControl */ | 
|  | ohci_set_ctl(ohci, val); | 
|  | break; | 
|  |  | 
|  | case 2: /* HcCommandStatus */ | 
|  | /* SOC is read-only */ | 
|  | val = (val & ~OHCI_STATUS_SOC); | 
|  |  | 
|  | /* Bits written as '0' remain unchanged in the register */ | 
|  | ohci->status |= val; | 
|  |  | 
|  | if (ohci->status & OHCI_STATUS_HCR) | 
|  | ohci_reset(ohci); | 
|  | break; | 
|  |  | 
|  | case 3: /* HcInterruptStatus */ | 
|  | ohci->intr_status &= ~val; | 
|  | ohci_intr_update(ohci); | 
|  | break; | 
|  |  | 
|  | case 4: /* HcInterruptEnable */ | 
|  | ohci->intr |= val; | 
|  | ohci_intr_update(ohci); | 
|  | break; | 
|  |  | 
|  | case 5: /* HcInterruptDisable */ | 
|  | ohci->intr &= ~val; | 
|  | ohci_intr_update(ohci); | 
|  | break; | 
|  |  | 
|  | case 6: /* HcHCCA */ | 
|  | ohci->hcca = val & OHCI_HCCA_MASK; | 
|  | break; | 
|  |  | 
|  | case 7: /* HcPeriodCurrentED */ | 
|  | /* Ignore writes to this read-only register, Linux does them */ | 
|  | break; | 
|  |  | 
|  | case 8: /* HcControlHeadED */ | 
|  | ohci->ctrl_head = val & OHCI_EDPTR_MASK; | 
|  | break; | 
|  |  | 
|  | case 9: /* HcControlCurrentED */ | 
|  | ohci->ctrl_cur = val & OHCI_EDPTR_MASK; | 
|  | break; | 
|  |  | 
|  | case 10: /* HcBulkHeadED */ | 
|  | ohci->bulk_head = val & OHCI_EDPTR_MASK; | 
|  | break; | 
|  |  | 
|  | case 11: /* HcBulkCurrentED */ | 
|  | ohci->bulk_cur = val & OHCI_EDPTR_MASK; | 
|  | break; | 
|  |  | 
|  | case 13: /* HcFmInterval */ | 
|  | ohci->fsmps = (val & OHCI_FMI_FSMPS) >> 16; | 
|  | ohci->fit = (val & OHCI_FMI_FIT) >> 31; | 
|  | ohci_set_frame_interval(ohci, val); | 
|  | break; | 
|  |  | 
|  | case 15: /* HcFmNumber */ | 
|  | break; | 
|  |  | 
|  | case 16: /* HcPeriodicStart */ | 
|  | ohci->pstart = val & 0xffff; | 
|  | break; | 
|  |  | 
|  | case 17: /* HcLSThreshold */ | 
|  | ohci->lst = val & 0xffff; | 
|  | break; | 
|  |  | 
|  | case 18: /* HcRhDescriptorA */ | 
|  | ohci->rhdesc_a &= ~OHCI_RHA_RW_MASK; | 
|  | ohci->rhdesc_a |= val & OHCI_RHA_RW_MASK; | 
|  | break; | 
|  |  | 
|  | case 19: /* HcRhDescriptorB */ | 
|  | break; | 
|  |  | 
|  | case 20: /* HcRhStatus */ | 
|  | ohci_set_hub_status(ohci, val); | 
|  | break; | 
|  |  | 
|  | /* PXA27x specific registers */ | 
|  | case 24: /* HcStatus */ | 
|  | ohci->hstatus &= ~(val & ohci->hmask); | 
|  |  | 
|  | case 25: /* HcHReset */ | 
|  | ohci->hreset = val & ~OHCI_HRESET_FSBIR; | 
|  | if (val & OHCI_HRESET_FSBIR) | 
|  | ohci_reset(ohci); | 
|  | break; | 
|  |  | 
|  | case 26: /* HcHInterruptEnable */ | 
|  | ohci->hmask = val; | 
|  | break; | 
|  |  | 
|  | case 27: /* HcHInterruptTest */ | 
|  | ohci->htest = val; | 
|  | break; | 
|  |  | 
|  | default: | 
|  | fprintf(stderr, "ohci_write: Bad offset %x\n", (int)addr); | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | static void ohci_async_cancel_device(OHCIState *ohci, USBDevice *dev) | 
|  | { | 
|  | if (ohci->async_td && | 
|  | usb_packet_is_inflight(&ohci->usb_packet) && | 
|  | ohci->usb_packet.ep->dev == dev) { | 
|  | usb_cancel_packet(&ohci->usb_packet); | 
|  | ohci->async_td = 0; | 
|  | } | 
|  | } | 
|  |  | 
|  | static const MemoryRegionOps ohci_mem_ops = { | 
|  | .read = ohci_mem_read, | 
|  | .write = ohci_mem_write, | 
|  | .endianness = DEVICE_LITTLE_ENDIAN, | 
|  | }; | 
|  |  | 
|  | static USBPortOps ohci_port_ops = { | 
|  | .attach = ohci_attach, | 
|  | .detach = ohci_detach, | 
|  | .child_detach = ohci_child_detach, | 
|  | .wakeup = ohci_wakeup, | 
|  | .complete = ohci_async_complete_packet, | 
|  | }; | 
|  |  | 
|  | static USBBusOps ohci_bus_ops = { | 
|  | }; | 
|  |  | 
|  | static int usb_ohci_init(OHCIState *ohci, DeviceState *dev, | 
|  | int num_ports, uint32_t localmem_base, | 
|  | char *masterbus, uint32_t firstport) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | if (usb_frame_time == 0) { | 
|  | #ifdef OHCI_TIME_WARP | 
|  | usb_frame_time = get_ticks_per_sec(); | 
|  | usb_bit_time = muldiv64(1, get_ticks_per_sec(), USB_HZ/1000); | 
|  | #else | 
|  | usb_frame_time = muldiv64(1, get_ticks_per_sec(), 1000); | 
|  | if (get_ticks_per_sec() >= USB_HZ) { | 
|  | usb_bit_time = muldiv64(1, get_ticks_per_sec(), USB_HZ); | 
|  | } else { | 
|  | usb_bit_time = 1; | 
|  | } | 
|  | #endif | 
|  | DPRINTF("usb-ohci: usb_bit_time=%" PRId64 " usb_frame_time=%" PRId64 "\n", | 
|  | usb_frame_time, usb_bit_time); | 
|  | } | 
|  |  | 
|  | ohci->num_ports = num_ports; | 
|  | if (masterbus) { | 
|  | USBPort *ports[OHCI_MAX_PORTS]; | 
|  | for(i = 0; i < num_ports; i++) { | 
|  | ports[i] = &ohci->rhport[i].port; | 
|  | } | 
|  | if (usb_register_companion(masterbus, ports, num_ports, | 
|  | firstport, ohci, &ohci_port_ops, | 
|  | USB_SPEED_MASK_LOW | USB_SPEED_MASK_FULL) != 0) { | 
|  | return -1; | 
|  | } | 
|  | } else { | 
|  | usb_bus_new(&ohci->bus, &ohci_bus_ops, dev); | 
|  | for (i = 0; i < num_ports; i++) { | 
|  | usb_register_port(&ohci->bus, &ohci->rhport[i].port, | 
|  | ohci, i, &ohci_port_ops, | 
|  | USB_SPEED_MASK_LOW | USB_SPEED_MASK_FULL); | 
|  | } | 
|  | } | 
|  |  | 
|  | memory_region_init_io(&ohci->mem, &ohci_mem_ops, ohci, "ohci", 256); | 
|  | ohci->localmem_base = localmem_base; | 
|  |  | 
|  | ohci->name = object_get_typename(OBJECT(dev)); | 
|  | usb_packet_init(&ohci->usb_packet); | 
|  |  | 
|  | ohci->async_td = 0; | 
|  | qemu_register_reset(ohci_reset, ohci); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | typedef struct { | 
|  | PCIDevice pci_dev; | 
|  | OHCIState state; | 
|  | char *masterbus; | 
|  | uint32_t num_ports; | 
|  | uint32_t firstport; | 
|  | } OHCIPCIState; | 
|  |  | 
|  | static int usb_ohci_initfn_pci(struct PCIDevice *dev) | 
|  | { | 
|  | OHCIPCIState *ohci = DO_UPCAST(OHCIPCIState, pci_dev, dev); | 
|  |  | 
|  | ohci->pci_dev.config[PCI_CLASS_PROG] = 0x10; /* OHCI */ | 
|  | ohci->pci_dev.config[PCI_INTERRUPT_PIN] = 0x01; /* interrupt pin A */ | 
|  |  | 
|  | if (usb_ohci_init(&ohci->state, &dev->qdev, ohci->num_ports, 0, | 
|  | ohci->masterbus, ohci->firstport) != 0) { | 
|  | return -1; | 
|  | } | 
|  | ohci->state.irq = ohci->pci_dev.irq[0]; | 
|  |  | 
|  | /* TODO: avoid cast below by using dev */ | 
|  | pci_register_bar(&ohci->pci_dev, 0, 0, &ohci->state.mem); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | void usb_ohci_init_pci(struct PCIBus *bus, int devfn) | 
|  | { | 
|  | pci_create_simple(bus, devfn, "pci-ohci"); | 
|  | } | 
|  |  | 
|  | typedef struct { | 
|  | SysBusDevice busdev; | 
|  | OHCIState ohci; | 
|  | uint32_t num_ports; | 
|  | target_phys_addr_t dma_offset; | 
|  | } OHCISysBusState; | 
|  |  | 
|  | static int ohci_init_pxa(SysBusDevice *dev) | 
|  | { | 
|  | OHCISysBusState *s = FROM_SYSBUS(OHCISysBusState, dev); | 
|  |  | 
|  | /* Cannot fail as we pass NULL for masterbus */ | 
|  | usb_ohci_init(&s->ohci, &dev->qdev, s->num_ports, s->dma_offset, NULL, 0); | 
|  | sysbus_init_irq(dev, &s->ohci.irq); | 
|  | sysbus_init_mmio(dev, &s->ohci.mem); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static Property ohci_pci_properties[] = { | 
|  | DEFINE_PROP_STRING("masterbus", OHCIPCIState, masterbus), | 
|  | DEFINE_PROP_UINT32("num-ports", OHCIPCIState, num_ports, 3), | 
|  | DEFINE_PROP_UINT32("firstport", OHCIPCIState, firstport, 0), | 
|  | DEFINE_PROP_END_OF_LIST(), | 
|  | }; | 
|  |  | 
|  | static void ohci_pci_class_init(ObjectClass *klass, void *data) | 
|  | { | 
|  | DeviceClass *dc = DEVICE_CLASS(klass); | 
|  | PCIDeviceClass *k = PCI_DEVICE_CLASS(klass); | 
|  |  | 
|  | k->init = usb_ohci_initfn_pci; | 
|  | k->vendor_id = PCI_VENDOR_ID_APPLE; | 
|  | k->device_id = PCI_DEVICE_ID_APPLE_IPID_USB; | 
|  | k->class_id = PCI_CLASS_SERIAL_USB; | 
|  | dc->desc = "Apple USB Controller"; | 
|  | dc->props = ohci_pci_properties; | 
|  | } | 
|  |  | 
|  | static TypeInfo ohci_pci_info = { | 
|  | .name          = "pci-ohci", | 
|  | .parent        = TYPE_PCI_DEVICE, | 
|  | .instance_size = sizeof(OHCIPCIState), | 
|  | .class_init    = ohci_pci_class_init, | 
|  | }; | 
|  |  | 
|  | static Property ohci_sysbus_properties[] = { | 
|  | DEFINE_PROP_UINT32("num-ports", OHCISysBusState, num_ports, 3), | 
|  | DEFINE_PROP_TADDR("dma-offset", OHCISysBusState, dma_offset, 3), | 
|  | DEFINE_PROP_END_OF_LIST(), | 
|  | }; | 
|  |  | 
|  | static void ohci_sysbus_class_init(ObjectClass *klass, void *data) | 
|  | { | 
|  | DeviceClass *dc = DEVICE_CLASS(klass); | 
|  | SysBusDeviceClass *sbc = SYS_BUS_DEVICE_CLASS(klass); | 
|  |  | 
|  | sbc->init = ohci_init_pxa; | 
|  | dc->desc = "OHCI USB Controller"; | 
|  | dc->props = ohci_sysbus_properties; | 
|  | } | 
|  |  | 
|  | static TypeInfo ohci_sysbus_info = { | 
|  | .name          = "sysbus-ohci", | 
|  | .parent        = TYPE_SYS_BUS_DEVICE, | 
|  | .instance_size = sizeof(OHCISysBusState), | 
|  | .class_init    = ohci_sysbus_class_init, | 
|  | }; | 
|  |  | 
|  | static void ohci_register_types(void) | 
|  | { | 
|  | type_register_static(&ohci_pci_info); | 
|  | type_register_static(&ohci_sysbus_info); | 
|  | } | 
|  |  | 
|  | type_init(ohci_register_types) |