| #if !defined (__MIPS_CPU_H__) |
| #define __MIPS_CPU_H__ |
| |
| //#define DEBUG_OP |
| |
| #define TARGET_HAS_ICE 1 |
| |
| #define ELF_MACHINE EM_MIPS |
| |
| #define CPUArchState struct CPUMIPSState |
| |
| #include "config.h" |
| #include "qemu-common.h" |
| #include "mips-defs.h" |
| #include "exec/cpu-defs.h" |
| #include "fpu/softfloat.h" |
| |
| struct CPUMIPSState; |
| |
| typedef struct r4k_tlb_t r4k_tlb_t; |
| struct r4k_tlb_t { |
| target_ulong VPN; |
| uint32_t PageMask; |
| uint_fast8_t ASID; |
| uint_fast16_t G:1; |
| uint_fast16_t C0:3; |
| uint_fast16_t C1:3; |
| uint_fast16_t V0:1; |
| uint_fast16_t V1:1; |
| uint_fast16_t D0:1; |
| uint_fast16_t D1:1; |
| target_ulong PFN[2]; |
| }; |
| |
| #if !defined(CONFIG_USER_ONLY) |
| typedef struct CPUMIPSTLBContext CPUMIPSTLBContext; |
| struct CPUMIPSTLBContext { |
| uint32_t nb_tlb; |
| uint32_t tlb_in_use; |
| int (*map_address) (struct CPUMIPSState *env, hwaddr *physical, int *prot, target_ulong address, int rw, int access_type); |
| void (*helper_tlbwi)(struct CPUMIPSState *env); |
| void (*helper_tlbwr)(struct CPUMIPSState *env); |
| void (*helper_tlbp)(struct CPUMIPSState *env); |
| void (*helper_tlbr)(struct CPUMIPSState *env); |
| union { |
| struct { |
| r4k_tlb_t tlb[MIPS_TLB_MAX]; |
| } r4k; |
| } mmu; |
| }; |
| #endif |
| |
| typedef union fpr_t fpr_t; |
| union fpr_t { |
| float64 fd; /* ieee double precision */ |
| float32 fs[2];/* ieee single precision */ |
| uint64_t d; /* binary double fixed-point */ |
| uint32_t w[2]; /* binary single fixed-point */ |
| }; |
| /* define FP_ENDIAN_IDX to access the same location |
| * in the fpr_t union regardless of the host endianness |
| */ |
| #if defined(HOST_WORDS_BIGENDIAN) |
| # define FP_ENDIAN_IDX 1 |
| #else |
| # define FP_ENDIAN_IDX 0 |
| #endif |
| |
| typedef struct CPUMIPSFPUContext CPUMIPSFPUContext; |
| struct CPUMIPSFPUContext { |
| /* Floating point registers */ |
| fpr_t fpr[32]; |
| float_status fp_status; |
| /* fpu implementation/revision register (fir) */ |
| uint32_t fcr0; |
| #define FCR0_UFRP 28 |
| #define FCR0_F64 22 |
| #define FCR0_L 21 |
| #define FCR0_W 20 |
| #define FCR0_3D 19 |
| #define FCR0_PS 18 |
| #define FCR0_D 17 |
| #define FCR0_S 16 |
| #define FCR0_PRID 8 |
| #define FCR0_REV 0 |
| /* fcsr */ |
| uint32_t fcr31; |
| #define SET_FP_COND(num,env) do { ((env).fcr31) |= ((num) ? (1 << ((num) + 24)) : (1 << 23)); } while(0) |
| #define CLEAR_FP_COND(num,env) do { ((env).fcr31) &= ~((num) ? (1 << ((num) + 24)) : (1 << 23)); } while(0) |
| #define GET_FP_COND(env) ((((env).fcr31 >> 24) & 0xfe) | (((env).fcr31 >> 23) & 0x1)) |
| #define GET_FP_CAUSE(reg) (((reg) >> 12) & 0x3f) |
| #define GET_FP_ENABLE(reg) (((reg) >> 7) & 0x1f) |
| #define GET_FP_FLAGS(reg) (((reg) >> 2) & 0x1f) |
| #define SET_FP_CAUSE(reg,v) do { (reg) = ((reg) & ~(0x3f << 12)) | ((v & 0x3f) << 12); } while(0) |
| #define SET_FP_ENABLE(reg,v) do { (reg) = ((reg) & ~(0x1f << 7)) | ((v & 0x1f) << 7); } while(0) |
| #define SET_FP_FLAGS(reg,v) do { (reg) = ((reg) & ~(0x1f << 2)) | ((v & 0x1f) << 2); } while(0) |
| #define UPDATE_FP_FLAGS(reg,v) do { (reg) |= ((v & 0x1f) << 2); } while(0) |
| #define FP_INEXACT 1 |
| #define FP_UNDERFLOW 2 |
| #define FP_OVERFLOW 4 |
| #define FP_DIV0 8 |
| #define FP_INVALID 16 |
| #define FP_UNIMPLEMENTED 32 |
| }; |
| |
| #define NB_MMU_MODES 3 |
| |
| typedef struct CPUMIPSMVPContext CPUMIPSMVPContext; |
| struct CPUMIPSMVPContext { |
| int32_t CP0_MVPControl; |
| #define CP0MVPCo_CPA 3 |
| #define CP0MVPCo_STLB 2 |
| #define CP0MVPCo_VPC 1 |
| #define CP0MVPCo_EVP 0 |
| int32_t CP0_MVPConf0; |
| #define CP0MVPC0_M 31 |
| #define CP0MVPC0_TLBS 29 |
| #define CP0MVPC0_GS 28 |
| #define CP0MVPC0_PCP 27 |
| #define CP0MVPC0_PTLBE 16 |
| #define CP0MVPC0_TCA 15 |
| #define CP0MVPC0_PVPE 10 |
| #define CP0MVPC0_PTC 0 |
| int32_t CP0_MVPConf1; |
| #define CP0MVPC1_CIM 31 |
| #define CP0MVPC1_CIF 30 |
| #define CP0MVPC1_PCX 20 |
| #define CP0MVPC1_PCP2 10 |
| #define CP0MVPC1_PCP1 0 |
| }; |
| |
| typedef struct mips_def_t mips_def_t; |
| |
| #define MIPS_SHADOW_SET_MAX 16 |
| #define MIPS_TC_MAX 5 |
| #define MIPS_FPU_MAX 1 |
| #define MIPS_DSP_ACC 4 |
| |
| typedef struct TCState TCState; |
| struct TCState { |
| target_ulong gpr[32]; |
| target_ulong PC; |
| target_ulong HI[MIPS_DSP_ACC]; |
| target_ulong LO[MIPS_DSP_ACC]; |
| target_ulong ACX[MIPS_DSP_ACC]; |
| target_ulong DSPControl; |
| int32_t CP0_TCStatus; |
| #define CP0TCSt_TCU3 31 |
| #define CP0TCSt_TCU2 30 |
| #define CP0TCSt_TCU1 29 |
| #define CP0TCSt_TCU0 28 |
| #define CP0TCSt_TMX 27 |
| #define CP0TCSt_RNST 23 |
| #define CP0TCSt_TDS 21 |
| #define CP0TCSt_DT 20 |
| #define CP0TCSt_DA 15 |
| #define CP0TCSt_A 13 |
| #define CP0TCSt_TKSU 11 |
| #define CP0TCSt_IXMT 10 |
| #define CP0TCSt_TASID 0 |
| int32_t CP0_TCBind; |
| #define CP0TCBd_CurTC 21 |
| #define CP0TCBd_TBE 17 |
| #define CP0TCBd_CurVPE 0 |
| target_ulong CP0_TCHalt; |
| target_ulong CP0_TCContext; |
| target_ulong CP0_TCSchedule; |
| target_ulong CP0_TCScheFBack; |
| int32_t CP0_Debug_tcstatus; |
| }; |
| |
| typedef struct CPUMIPSState CPUMIPSState; |
| struct CPUMIPSState { |
| TCState active_tc; |
| CPUMIPSFPUContext active_fpu; |
| |
| uint32_t current_tc; |
| uint32_t current_fpu; |
| |
| uint32_t SEGBITS; |
| uint32_t PABITS; |
| target_ulong SEGMask; |
| target_ulong PAMask; |
| |
| int32_t CP0_Index; |
| /* CP0_MVP* are per MVP registers. */ |
| int32_t CP0_Random; |
| int32_t CP0_VPEControl; |
| #define CP0VPECo_YSI 21 |
| #define CP0VPECo_GSI 20 |
| #define CP0VPECo_EXCPT 16 |
| #define CP0VPECo_TE 15 |
| #define CP0VPECo_TargTC 0 |
| int32_t CP0_VPEConf0; |
| #define CP0VPEC0_M 31 |
| #define CP0VPEC0_XTC 21 |
| #define CP0VPEC0_TCS 19 |
| #define CP0VPEC0_SCS 18 |
| #define CP0VPEC0_DSC 17 |
| #define CP0VPEC0_ICS 16 |
| #define CP0VPEC0_MVP 1 |
| #define CP0VPEC0_VPA 0 |
| int32_t CP0_VPEConf1; |
| #define CP0VPEC1_NCX 20 |
| #define CP0VPEC1_NCP2 10 |
| #define CP0VPEC1_NCP1 0 |
| target_ulong CP0_YQMask; |
| target_ulong CP0_VPESchedule; |
| target_ulong CP0_VPEScheFBack; |
| int32_t CP0_VPEOpt; |
| #define CP0VPEOpt_IWX7 15 |
| #define CP0VPEOpt_IWX6 14 |
| #define CP0VPEOpt_IWX5 13 |
| #define CP0VPEOpt_IWX4 12 |
| #define CP0VPEOpt_IWX3 11 |
| #define CP0VPEOpt_IWX2 10 |
| #define CP0VPEOpt_IWX1 9 |
| #define CP0VPEOpt_IWX0 8 |
| #define CP0VPEOpt_DWX7 7 |
| #define CP0VPEOpt_DWX6 6 |
| #define CP0VPEOpt_DWX5 5 |
| #define CP0VPEOpt_DWX4 4 |
| #define CP0VPEOpt_DWX3 3 |
| #define CP0VPEOpt_DWX2 2 |
| #define CP0VPEOpt_DWX1 1 |
| #define CP0VPEOpt_DWX0 0 |
| target_ulong CP0_EntryLo0; |
| target_ulong CP0_EntryLo1; |
| target_ulong CP0_Context; |
| int32_t CP0_PageMask; |
| int32_t CP0_PageGrain; |
| int32_t CP0_Wired; |
| int32_t CP0_SRSConf0_rw_bitmask; |
| int32_t CP0_SRSConf0; |
| #define CP0SRSC0_M 31 |
| #define CP0SRSC0_SRS3 20 |
| #define CP0SRSC0_SRS2 10 |
| #define CP0SRSC0_SRS1 0 |
| int32_t CP0_SRSConf1_rw_bitmask; |
| int32_t CP0_SRSConf1; |
| #define CP0SRSC1_M 31 |
| #define CP0SRSC1_SRS6 20 |
| #define CP0SRSC1_SRS5 10 |
| #define CP0SRSC1_SRS4 0 |
| int32_t CP0_SRSConf2_rw_bitmask; |
| int32_t CP0_SRSConf2; |
| #define CP0SRSC2_M 31 |
| #define CP0SRSC2_SRS9 20 |
| #define CP0SRSC2_SRS8 10 |
| #define CP0SRSC2_SRS7 0 |
| int32_t CP0_SRSConf3_rw_bitmask; |
| int32_t CP0_SRSConf3; |
| #define CP0SRSC3_M 31 |
| #define CP0SRSC3_SRS12 20 |
| #define CP0SRSC3_SRS11 10 |
| #define CP0SRSC3_SRS10 0 |
| int32_t CP0_SRSConf4_rw_bitmask; |
| int32_t CP0_SRSConf4; |
| #define CP0SRSC4_SRS15 20 |
| #define CP0SRSC4_SRS14 10 |
| #define CP0SRSC4_SRS13 0 |
| int32_t CP0_HWREna; |
| target_ulong CP0_BadVAddr; |
| int32_t CP0_Count; |
| target_ulong CP0_EntryHi; |
| int32_t CP0_Compare; |
| int32_t CP0_Status; |
| #define CP0St_CU3 31 |
| #define CP0St_CU2 30 |
| #define CP0St_CU1 29 |
| #define CP0St_CU0 28 |
| #define CP0St_RP 27 |
| #define CP0St_FR 26 |
| #define CP0St_RE 25 |
| #define CP0St_MX 24 |
| #define CP0St_PX 23 |
| #define CP0St_BEV 22 |
| #define CP0St_TS 21 |
| #define CP0St_SR 20 |
| #define CP0St_NMI 19 |
| #define CP0St_IM 8 |
| #define CP0St_KX 7 |
| #define CP0St_SX 6 |
| #define CP0St_UX 5 |
| #define CP0St_KSU 3 |
| #define CP0St_ERL 2 |
| #define CP0St_EXL 1 |
| #define CP0St_IE 0 |
| int32_t CP0_IntCtl; |
| #define CP0IntCtl_IPTI 29 |
| #define CP0IntCtl_IPPC1 26 |
| #define CP0IntCtl_VS 5 |
| int32_t CP0_SRSCtl; |
| #define CP0SRSCtl_HSS 26 |
| #define CP0SRSCtl_EICSS 18 |
| #define CP0SRSCtl_ESS 12 |
| #define CP0SRSCtl_PSS 6 |
| #define CP0SRSCtl_CSS 0 |
| int32_t CP0_SRSMap; |
| #define CP0SRSMap_SSV7 28 |
| #define CP0SRSMap_SSV6 24 |
| #define CP0SRSMap_SSV5 20 |
| #define CP0SRSMap_SSV4 16 |
| #define CP0SRSMap_SSV3 12 |
| #define CP0SRSMap_SSV2 8 |
| #define CP0SRSMap_SSV1 4 |
| #define CP0SRSMap_SSV0 0 |
| int32_t CP0_Cause; |
| #define CP0Ca_BD 31 |
| #define CP0Ca_TI 30 |
| #define CP0Ca_CE 28 |
| #define CP0Ca_DC 27 |
| #define CP0Ca_PCI 26 |
| #define CP0Ca_IV 23 |
| #define CP0Ca_WP 22 |
| #define CP0Ca_IP 8 |
| #define CP0Ca_IP_mask 0x0000FF00 |
| #define CP0Ca_EC 2 |
| target_ulong CP0_EPC; |
| int32_t CP0_PRid; |
| int32_t CP0_EBase; |
| int32_t CP0_Config0; |
| #define CP0C0_M 31 |
| #define CP0C0_K23 28 |
| #define CP0C0_KU 25 |
| #define CP0C0_MDU 20 |
| #define CP0C0_MM 17 |
| #define CP0C0_BM 16 |
| #define CP0C0_BE 15 |
| #define CP0C0_AT 13 |
| #define CP0C0_AR 10 |
| #define CP0C0_MT 7 |
| #define CP0C0_VI 3 |
| #define CP0C0_K0 0 |
| int32_t CP0_Config1; |
| #define CP0C1_M 31 |
| #define CP0C1_MMU 25 |
| #define CP0C1_IS 22 |
| #define CP0C1_IL 19 |
| #define CP0C1_IA 16 |
| #define CP0C1_DS 13 |
| #define CP0C1_DL 10 |
| #define CP0C1_DA 7 |
| #define CP0C1_C2 6 |
| #define CP0C1_MD 5 |
| #define CP0C1_PC 4 |
| #define CP0C1_WR 3 |
| #define CP0C1_CA 2 |
| #define CP0C1_EP 1 |
| #define CP0C1_FP 0 |
| int32_t CP0_Config2; |
| #define CP0C2_M 31 |
| #define CP0C2_TU 28 |
| #define CP0C2_TS 24 |
| #define CP0C2_TL 20 |
| #define CP0C2_TA 16 |
| #define CP0C2_SU 12 |
| #define CP0C2_SS 8 |
| #define CP0C2_SL 4 |
| #define CP0C2_SA 0 |
| int32_t CP0_Config3; |
| #define CP0C3_M 31 |
| #define CP0C3_ISA_ON_EXC 16 |
| #define CP0C3_DSPP 10 |
| #define CP0C3_LPA 7 |
| #define CP0C3_VEIC 6 |
| #define CP0C3_VInt 5 |
| #define CP0C3_SP 4 |
| #define CP0C3_MT 2 |
| #define CP0C3_SM 1 |
| #define CP0C3_TL 0 |
| uint32_t CP0_Config4; |
| uint32_t CP0_Config4_rw_bitmask; |
| #define CP0C4_M 31 |
| uint32_t CP0_Config5; |
| uint32_t CP0_Config5_rw_bitmask; |
| #define CP0C5_M 31 |
| #define CP0C5_K 30 |
| #define CP0C5_CV 29 |
| #define CP0C5_EVA 28 |
| #define CP0C5_MSAEn 27 |
| #define CP0C5_UFR 2 |
| #define CP0C5_NFExists 0 |
| int32_t CP0_Config6; |
| int32_t CP0_Config7; |
| /* XXX: Maybe make LLAddr per-TC? */ |
| target_ulong lladdr; |
| target_ulong llval; |
| target_ulong llnewval; |
| target_ulong llreg; |
| target_ulong CP0_LLAddr_rw_bitmask; |
| int CP0_LLAddr_shift; |
| target_ulong CP0_WatchLo[8]; |
| int32_t CP0_WatchHi[8]; |
| target_ulong CP0_XContext; |
| int32_t CP0_Framemask; |
| int32_t CP0_Debug; |
| #define CP0DB_DBD 31 |
| #define CP0DB_DM 30 |
| #define CP0DB_LSNM 28 |
| #define CP0DB_Doze 27 |
| #define CP0DB_Halt 26 |
| #define CP0DB_CNT 25 |
| #define CP0DB_IBEP 24 |
| #define CP0DB_DBEP 21 |
| #define CP0DB_IEXI 20 |
| #define CP0DB_VER 15 |
| #define CP0DB_DEC 10 |
| #define CP0DB_SSt 8 |
| #define CP0DB_DINT 5 |
| #define CP0DB_DIB 4 |
| #define CP0DB_DDBS 3 |
| #define CP0DB_DDBL 2 |
| #define CP0DB_DBp 1 |
| #define CP0DB_DSS 0 |
| target_ulong CP0_DEPC; |
| int32_t CP0_Performance0; |
| int32_t CP0_TagLo; |
| int32_t CP0_DataLo; |
| int32_t CP0_TagHi; |
| int32_t CP0_DataHi; |
| target_ulong CP0_ErrorEPC; |
| int32_t CP0_DESAVE; |
| /* We waste some space so we can handle shadow registers like TCs. */ |
| TCState tcs[MIPS_SHADOW_SET_MAX]; |
| CPUMIPSFPUContext fpus[MIPS_FPU_MAX]; |
| /* QEMU */ |
| int error_code; |
| uint32_t hflags; /* CPU State */ |
| /* TMASK defines different execution modes */ |
| #define MIPS_HFLAG_TMASK 0xC07FF |
| #define MIPS_HFLAG_MODE 0x00007 /* execution modes */ |
| /* The KSU flags must be the lowest bits in hflags. The flag order |
| must be the same as defined for CP0 Status. This allows to use |
| the bits as the value of mmu_idx. */ |
| #define MIPS_HFLAG_KSU 0x00003 /* kernel/supervisor/user mode mask */ |
| #define MIPS_HFLAG_UM 0x00002 /* user mode flag */ |
| #define MIPS_HFLAG_SM 0x00001 /* supervisor mode flag */ |
| #define MIPS_HFLAG_KM 0x00000 /* kernel mode flag */ |
| #define MIPS_HFLAG_DM 0x00004 /* Debug mode */ |
| #define MIPS_HFLAG_64 0x00008 /* 64-bit instructions enabled */ |
| #define MIPS_HFLAG_CP0 0x00010 /* CP0 enabled */ |
| #define MIPS_HFLAG_FPU 0x00020 /* FPU enabled */ |
| #define MIPS_HFLAG_F64 0x00040 /* 64-bit FPU enabled */ |
| /* True if the MIPS IV COP1X instructions can be used. This also |
| controls the non-COP1X instructions RECIP.S, RECIP.D, RSQRT.S |
| and RSQRT.D. */ |
| #define MIPS_HFLAG_COP1X 0x00080 /* COP1X instructions enabled */ |
| #define MIPS_HFLAG_RE 0x00100 /* Reversed endianness */ |
| #define MIPS_HFLAG_UX 0x00200 /* 64-bit user mode */ |
| #define MIPS_HFLAG_M16 0x00400 /* MIPS16 mode flag */ |
| #define MIPS_HFLAG_M16_SHIFT 10 |
| /* If translation is interrupted between the branch instruction and |
| * the delay slot, record what type of branch it is so that we can |
| * resume translation properly. It might be possible to reduce |
| * this from three bits to two. */ |
| #define MIPS_HFLAG_BMASK_BASE 0x03800 |
| #define MIPS_HFLAG_B 0x00800 /* Unconditional branch */ |
| #define MIPS_HFLAG_BC 0x01000 /* Conditional branch */ |
| #define MIPS_HFLAG_BL 0x01800 /* Likely branch */ |
| #define MIPS_HFLAG_BR 0x02000 /* branch to register (can't link TB) */ |
| /* Extra flags about the current pending branch. */ |
| #define MIPS_HFLAG_BMASK_EXT 0x3C000 |
| #define MIPS_HFLAG_B16 0x04000 /* branch instruction was 16 bits */ |
| #define MIPS_HFLAG_BDS16 0x08000 /* branch requires 16-bit delay slot */ |
| #define MIPS_HFLAG_BDS32 0x10000 /* branch requires 32-bit delay slot */ |
| #define MIPS_HFLAG_BX 0x20000 /* branch exchanges execution mode */ |
| #define MIPS_HFLAG_BMASK (MIPS_HFLAG_BMASK_BASE | MIPS_HFLAG_BMASK_EXT) |
| /* MIPS DSP resources access. */ |
| #define MIPS_HFLAG_DSP 0x40000 /* Enable access to MIPS DSP resources. */ |
| #define MIPS_HFLAG_DSPR2 0x80000 /* Enable access to MIPS DSPR2 resources. */ |
| target_ulong btarget; /* Jump / branch target */ |
| target_ulong bcond; /* Branch condition (if needed) */ |
| |
| int SYNCI_Step; /* Address step size for SYNCI */ |
| int CCRes; /* Cycle count resolution/divisor */ |
| uint32_t CP0_Status_rw_bitmask; /* Read/write bits in CP0_Status */ |
| uint32_t CP0_TCStatus_rw_bitmask; /* Read/write bits in CP0_TCStatus */ |
| int insn_flags; /* Supported instruction set */ |
| |
| target_ulong tls_value; /* For usermode emulation */ |
| |
| CPU_COMMON |
| |
| /* Fields from here on are preserved across CPU reset. */ |
| CPUMIPSMVPContext *mvp; |
| #if !defined(CONFIG_USER_ONLY) |
| CPUMIPSTLBContext *tlb; |
| #endif |
| |
| const mips_def_t *cpu_model; |
| void *irq[8]; |
| QEMUTimer *timer; /* Internal timer */ |
| }; |
| |
| #include "cpu-qom.h" |
| |
| #if !defined(CONFIG_USER_ONLY) |
| int no_mmu_map_address (CPUMIPSState *env, hwaddr *physical, int *prot, |
| target_ulong address, int rw, int access_type); |
| int fixed_mmu_map_address (CPUMIPSState *env, hwaddr *physical, int *prot, |
| target_ulong address, int rw, int access_type); |
| int r4k_map_address (CPUMIPSState *env, hwaddr *physical, int *prot, |
| target_ulong address, int rw, int access_type); |
| void r4k_helper_tlbwi(CPUMIPSState *env); |
| void r4k_helper_tlbwr(CPUMIPSState *env); |
| void r4k_helper_tlbp(CPUMIPSState *env); |
| void r4k_helper_tlbr(CPUMIPSState *env); |
| |
| void mips_cpu_unassigned_access(CPUState *cpu, hwaddr addr, |
| bool is_write, bool is_exec, int unused, |
| unsigned size); |
| #endif |
| |
| void mips_cpu_list (FILE *f, fprintf_function cpu_fprintf); |
| |
| #define cpu_exec cpu_mips_exec |
| #define cpu_gen_code cpu_mips_gen_code |
| #define cpu_signal_handler cpu_mips_signal_handler |
| #define cpu_list mips_cpu_list |
| |
| extern void cpu_wrdsp(uint32_t rs, uint32_t mask_num, CPUMIPSState *env); |
| extern uint32_t cpu_rddsp(uint32_t mask_num, CPUMIPSState *env); |
| |
| #define CPU_SAVE_VERSION 3 |
| |
| /* MMU modes definitions. We carefully match the indices with our |
| hflags layout. */ |
| #define MMU_MODE0_SUFFIX _kernel |
| #define MMU_MODE1_SUFFIX _super |
| #define MMU_MODE2_SUFFIX _user |
| #define MMU_USER_IDX 2 |
| static inline int cpu_mmu_index (CPUMIPSState *env) |
| { |
| return env->hflags & MIPS_HFLAG_KSU; |
| } |
| |
| static inline int cpu_mips_hw_interrupts_pending(CPUMIPSState *env) |
| { |
| int32_t pending; |
| int32_t status; |
| int r; |
| |
| if (!(env->CP0_Status & (1 << CP0St_IE)) || |
| (env->CP0_Status & (1 << CP0St_EXL)) || |
| (env->CP0_Status & (1 << CP0St_ERL)) || |
| /* Note that the TCStatus IXMT field is initialized to zero, |
| and only MT capable cores can set it to one. So we don't |
| need to check for MT capabilities here. */ |
| (env->active_tc.CP0_TCStatus & (1 << CP0TCSt_IXMT)) || |
| (env->hflags & MIPS_HFLAG_DM)) { |
| /* Interrupts are disabled */ |
| return 0; |
| } |
| |
| pending = env->CP0_Cause & CP0Ca_IP_mask; |
| status = env->CP0_Status & CP0Ca_IP_mask; |
| |
| if (env->CP0_Config3 & (1 << CP0C3_VEIC)) { |
| /* A MIPS configured with a vectorizing external interrupt controller |
| will feed a vector into the Cause pending lines. The core treats |
| the status lines as a vector level, not as indiviual masks. */ |
| r = pending > status; |
| } else { |
| /* A MIPS configured with compatibility or VInt (Vectored Interrupts) |
| treats the pending lines as individual interrupt lines, the status |
| lines are individual masks. */ |
| r = pending & status; |
| } |
| return r; |
| } |
| |
| #include "exec/cpu-all.h" |
| |
| /* Memory access type : |
| * may be needed for precise access rights control and precise exceptions. |
| */ |
| enum { |
| /* 1 bit to define user level / supervisor access */ |
| ACCESS_USER = 0x00, |
| ACCESS_SUPER = 0x01, |
| /* 1 bit to indicate direction */ |
| ACCESS_STORE = 0x02, |
| /* Type of instruction that generated the access */ |
| ACCESS_CODE = 0x10, /* Code fetch access */ |
| ACCESS_INT = 0x20, /* Integer load/store access */ |
| ACCESS_FLOAT = 0x30, /* floating point load/store access */ |
| }; |
| |
| /* Exceptions */ |
| enum { |
| EXCP_NONE = -1, |
| EXCP_RESET = 0, |
| EXCP_SRESET, |
| EXCP_DSS, |
| EXCP_DINT, |
| EXCP_DDBL, |
| EXCP_DDBS, |
| EXCP_NMI, |
| EXCP_MCHECK, |
| EXCP_EXT_INTERRUPT, /* 8 */ |
| EXCP_DFWATCH, |
| EXCP_DIB, |
| EXCP_IWATCH, |
| EXCP_AdEL, |
| EXCP_AdES, |
| EXCP_TLBF, |
| EXCP_IBE, |
| EXCP_DBp, /* 16 */ |
| EXCP_SYSCALL, |
| EXCP_BREAK, |
| EXCP_CpU, |
| EXCP_RI, |
| EXCP_OVERFLOW, |
| EXCP_TRAP, |
| EXCP_FPE, |
| EXCP_DWATCH, /* 24 */ |
| EXCP_LTLBL, |
| EXCP_TLBL, |
| EXCP_TLBS, |
| EXCP_DBE, |
| EXCP_THREAD, |
| EXCP_MDMX, |
| EXCP_C2E, |
| EXCP_CACHE, /* 32 */ |
| EXCP_DSPDIS, |
| |
| EXCP_LAST = EXCP_DSPDIS, |
| }; |
| /* Dummy exception for conditional stores. */ |
| #define EXCP_SC 0x100 |
| |
| /* |
| * This is an interrnally generated WAKE request line. |
| * It is driven by the CPU itself. Raised when the MT |
| * block wants to wake a VPE from an inactive state and |
| * cleared when VPE goes from active to inactive. |
| */ |
| #define CPU_INTERRUPT_WAKE CPU_INTERRUPT_TGT_INT_0 |
| |
| int cpu_mips_exec(CPUMIPSState *s); |
| void mips_tcg_init(void); |
| MIPSCPU *cpu_mips_init(const char *cpu_model); |
| int cpu_mips_signal_handler(int host_signum, void *pinfo, void *puc); |
| |
| static inline CPUMIPSState *cpu_init(const char *cpu_model) |
| { |
| MIPSCPU *cpu = cpu_mips_init(cpu_model); |
| if (cpu == NULL) { |
| return NULL; |
| } |
| return &cpu->env; |
| } |
| |
| /* TODO QOM'ify CPU reset and remove */ |
| void cpu_state_reset(CPUMIPSState *s); |
| |
| /* mips_timer.c */ |
| uint32_t cpu_mips_get_random (CPUMIPSState *env); |
| uint32_t cpu_mips_get_count (CPUMIPSState *env); |
| void cpu_mips_store_count (CPUMIPSState *env, uint32_t value); |
| void cpu_mips_store_compare (CPUMIPSState *env, uint32_t value); |
| void cpu_mips_start_count(CPUMIPSState *env); |
| void cpu_mips_stop_count(CPUMIPSState *env); |
| |
| /* mips_int.c */ |
| void cpu_mips_soft_irq(CPUMIPSState *env, int irq, int level); |
| |
| /* helper.c */ |
| int mips_cpu_handle_mmu_fault(CPUState *cpu, vaddr address, int rw, |
| int mmu_idx); |
| #if !defined(CONFIG_USER_ONLY) |
| void r4k_invalidate_tlb (CPUMIPSState *env, int idx, int use_extra); |
| hwaddr cpu_mips_translate_address (CPUMIPSState *env, target_ulong address, |
| int rw); |
| #endif |
| target_ulong exception_resume_pc (CPUMIPSState *env); |
| |
| static inline void cpu_get_tb_cpu_state(CPUMIPSState *env, target_ulong *pc, |
| target_ulong *cs_base, int *flags) |
| { |
| *pc = env->active_tc.PC; |
| *cs_base = 0; |
| *flags = env->hflags & (MIPS_HFLAG_TMASK | MIPS_HFLAG_BMASK); |
| } |
| |
| static inline int mips_vpe_active(CPUMIPSState *env) |
| { |
| int active = 1; |
| |
| /* Check that the VPE is enabled. */ |
| if (!(env->mvp->CP0_MVPControl & (1 << CP0MVPCo_EVP))) { |
| active = 0; |
| } |
| /* Check that the VPE is activated. */ |
| if (!(env->CP0_VPEConf0 & (1 << CP0VPEC0_VPA))) { |
| active = 0; |
| } |
| |
| /* Now verify that there are active thread contexts in the VPE. |
| |
| This assumes the CPU model will internally reschedule threads |
| if the active one goes to sleep. If there are no threads available |
| the active one will be in a sleeping state, and we can turn off |
| the entire VPE. */ |
| if (!(env->active_tc.CP0_TCStatus & (1 << CP0TCSt_A))) { |
| /* TC is not activated. */ |
| active = 0; |
| } |
| if (env->active_tc.CP0_TCHalt & 1) { |
| /* TC is in halt state. */ |
| active = 0; |
| } |
| |
| return active; |
| } |
| |
| #include "exec/exec-all.h" |
| |
| static inline void compute_hflags(CPUMIPSState *env) |
| { |
| env->hflags &= ~(MIPS_HFLAG_COP1X | MIPS_HFLAG_64 | MIPS_HFLAG_CP0 | |
| MIPS_HFLAG_F64 | MIPS_HFLAG_FPU | MIPS_HFLAG_KSU | |
| MIPS_HFLAG_UX | MIPS_HFLAG_DSP | MIPS_HFLAG_DSPR2); |
| if (!(env->CP0_Status & (1 << CP0St_EXL)) && |
| !(env->CP0_Status & (1 << CP0St_ERL)) && |
| !(env->hflags & MIPS_HFLAG_DM)) { |
| env->hflags |= (env->CP0_Status >> CP0St_KSU) & MIPS_HFLAG_KSU; |
| } |
| #if defined(TARGET_MIPS64) |
| if (((env->hflags & MIPS_HFLAG_KSU) != MIPS_HFLAG_UM) || |
| (env->CP0_Status & (1 << CP0St_PX)) || |
| (env->CP0_Status & (1 << CP0St_UX))) { |
| env->hflags |= MIPS_HFLAG_64; |
| } |
| if (env->CP0_Status & (1 << CP0St_UX)) { |
| env->hflags |= MIPS_HFLAG_UX; |
| } |
| #endif |
| if ((env->CP0_Status & (1 << CP0St_CU0)) || |
| !(env->hflags & MIPS_HFLAG_KSU)) { |
| env->hflags |= MIPS_HFLAG_CP0; |
| } |
| if (env->CP0_Status & (1 << CP0St_CU1)) { |
| env->hflags |= MIPS_HFLAG_FPU; |
| } |
| if (env->CP0_Status & (1 << CP0St_FR)) { |
| env->hflags |= MIPS_HFLAG_F64; |
| } |
| if (env->insn_flags & ASE_DSPR2) { |
| /* Enables access MIPS DSP resources, now our cpu is DSP ASER2, |
| so enable to access DSPR2 resources. */ |
| if (env->CP0_Status & (1 << CP0St_MX)) { |
| env->hflags |= MIPS_HFLAG_DSP | MIPS_HFLAG_DSPR2; |
| } |
| |
| } else if (env->insn_flags & ASE_DSP) { |
| /* Enables access MIPS DSP resources, now our cpu is DSP ASE, |
| so enable to access DSP resources. */ |
| if (env->CP0_Status & (1 << CP0St_MX)) { |
| env->hflags |= MIPS_HFLAG_DSP; |
| } |
| |
| } |
| if (env->insn_flags & ISA_MIPS32R2) { |
| if (env->active_fpu.fcr0 & (1 << FCR0_F64)) { |
| env->hflags |= MIPS_HFLAG_COP1X; |
| } |
| } else if (env->insn_flags & ISA_MIPS32) { |
| if (env->hflags & MIPS_HFLAG_64) { |
| env->hflags |= MIPS_HFLAG_COP1X; |
| } |
| } else if (env->insn_flags & ISA_MIPS4) { |
| /* All supported MIPS IV CPUs use the XX (CU3) to enable |
| and disable the MIPS IV extensions to the MIPS III ISA. |
| Some other MIPS IV CPUs ignore the bit, so the check here |
| would be too restrictive for them. */ |
| if (env->CP0_Status & (1U << CP0St_CU3)) { |
| env->hflags |= MIPS_HFLAG_COP1X; |
| } |
| } |
| } |
| |
| #endif /* !defined (__MIPS_CPU_H__) */ |