| /* | 
 |  * Virtio PCI Bindings | 
 |  * | 
 |  * Copyright IBM, Corp. 2007 | 
 |  * Copyright (c) 2009 CodeSourcery | 
 |  * | 
 |  * Authors: | 
 |  *  Anthony Liguori   <aliguori@us.ibm.com> | 
 |  *  Paul Brook        <paul@codesourcery.com> | 
 |  * | 
 |  * This work is licensed under the terms of the GNU GPL, version 2.  See | 
 |  * the COPYING file in the top-level directory. | 
 |  * | 
 |  * Contributions after 2012-01-13 are licensed under the terms of the | 
 |  * GNU GPL, version 2 or (at your option) any later version. | 
 |  */ | 
 |  | 
 | #include <inttypes.h> | 
 |  | 
 | #include "hw/virtio/virtio.h" | 
 | #include "hw/virtio/virtio-blk.h" | 
 | #include "hw/virtio/virtio-net.h" | 
 | #include "hw/virtio/virtio-serial.h" | 
 | #include "hw/virtio/virtio-scsi.h" | 
 | #include "hw/virtio/virtio-balloon.h" | 
 | #include "hw/pci/pci.h" | 
 | #include "qemu/error-report.h" | 
 | #include "hw/pci/msi.h" | 
 | #include "hw/pci/msix.h" | 
 | #include "hw/loader.h" | 
 | #include "sysemu/kvm.h" | 
 | #include "sysemu/block-backend.h" | 
 | #include "virtio-pci.h" | 
 | #include "qemu/range.h" | 
 | #include "hw/virtio/virtio-bus.h" | 
 | #include "qapi/visitor.h" | 
 |  | 
 | /* from Linux's linux/virtio_pci.h */ | 
 |  | 
 | /* A 32-bit r/o bitmask of the features supported by the host */ | 
 | #define VIRTIO_PCI_HOST_FEATURES        0 | 
 |  | 
 | /* A 32-bit r/w bitmask of features activated by the guest */ | 
 | #define VIRTIO_PCI_GUEST_FEATURES       4 | 
 |  | 
 | /* A 32-bit r/w PFN for the currently selected queue */ | 
 | #define VIRTIO_PCI_QUEUE_PFN            8 | 
 |  | 
 | /* A 16-bit r/o queue size for the currently selected queue */ | 
 | #define VIRTIO_PCI_QUEUE_NUM            12 | 
 |  | 
 | /* A 16-bit r/w queue selector */ | 
 | #define VIRTIO_PCI_QUEUE_SEL            14 | 
 |  | 
 | /* A 16-bit r/w queue notifier */ | 
 | #define VIRTIO_PCI_QUEUE_NOTIFY         16 | 
 |  | 
 | /* An 8-bit device status register.  */ | 
 | #define VIRTIO_PCI_STATUS               18 | 
 |  | 
 | /* An 8-bit r/o interrupt status register.  Reading the value will return the | 
 |  * current contents of the ISR and will also clear it.  This is effectively | 
 |  * a read-and-acknowledge. */ | 
 | #define VIRTIO_PCI_ISR                  19 | 
 |  | 
 | /* MSI-X registers: only enabled if MSI-X is enabled. */ | 
 | /* A 16-bit vector for configuration changes. */ | 
 | #define VIRTIO_MSI_CONFIG_VECTOR        20 | 
 | /* A 16-bit vector for selected queue notifications. */ | 
 | #define VIRTIO_MSI_QUEUE_VECTOR         22 | 
 |  | 
 | /* Config space size */ | 
 | #define VIRTIO_PCI_CONFIG_NOMSI         20 | 
 | #define VIRTIO_PCI_CONFIG_MSI           24 | 
 | #define VIRTIO_PCI_REGION_SIZE(dev)     (msix_present(dev) ? \ | 
 |                                          VIRTIO_PCI_CONFIG_MSI : \ | 
 |                                          VIRTIO_PCI_CONFIG_NOMSI) | 
 |  | 
 | /* The remaining space is defined by each driver as the per-driver | 
 |  * configuration space */ | 
 | #define VIRTIO_PCI_CONFIG(dev)          (msix_enabled(dev) ? \ | 
 |                                          VIRTIO_PCI_CONFIG_MSI : \ | 
 |                                          VIRTIO_PCI_CONFIG_NOMSI) | 
 |  | 
 | /* How many bits to shift physical queue address written to QUEUE_PFN. | 
 |  * 12 is historical, and due to x86 page size. */ | 
 | #define VIRTIO_PCI_QUEUE_ADDR_SHIFT    12 | 
 |  | 
 | /* Flags track per-device state like workarounds for quirks in older guests. */ | 
 | #define VIRTIO_PCI_FLAG_BUS_MASTER_BUG  (1 << 0) | 
 |  | 
 | static void virtio_pci_bus_new(VirtioBusState *bus, size_t bus_size, | 
 |                                VirtIOPCIProxy *dev); | 
 |  | 
 | /* virtio device */ | 
 | /* DeviceState to VirtIOPCIProxy. For use off data-path. TODO: use QOM. */ | 
 | static inline VirtIOPCIProxy *to_virtio_pci_proxy(DeviceState *d) | 
 | { | 
 |     return container_of(d, VirtIOPCIProxy, pci_dev.qdev); | 
 | } | 
 |  | 
 | /* DeviceState to VirtIOPCIProxy. Note: used on datapath, | 
 |  * be careful and test performance if you change this. | 
 |  */ | 
 | static inline VirtIOPCIProxy *to_virtio_pci_proxy_fast(DeviceState *d) | 
 | { | 
 |     return container_of(d, VirtIOPCIProxy, pci_dev.qdev); | 
 | } | 
 |  | 
 | static void virtio_pci_notify(DeviceState *d, uint16_t vector) | 
 | { | 
 |     VirtIOPCIProxy *proxy = to_virtio_pci_proxy_fast(d); | 
 |  | 
 |     if (msix_enabled(&proxy->pci_dev)) | 
 |         msix_notify(&proxy->pci_dev, vector); | 
 |     else { | 
 |         VirtIODevice *vdev = virtio_bus_get_device(&proxy->bus); | 
 |         pci_set_irq(&proxy->pci_dev, vdev->isr & 1); | 
 |     } | 
 | } | 
 |  | 
 | static void virtio_pci_save_config(DeviceState *d, QEMUFile *f) | 
 | { | 
 |     VirtIOPCIProxy *proxy = to_virtio_pci_proxy(d); | 
 |     VirtIODevice *vdev = virtio_bus_get_device(&proxy->bus); | 
 |  | 
 |     pci_device_save(&proxy->pci_dev, f); | 
 |     msix_save(&proxy->pci_dev, f); | 
 |     if (msix_present(&proxy->pci_dev)) | 
 |         qemu_put_be16(f, vdev->config_vector); | 
 | } | 
 |  | 
 | static void virtio_pci_save_queue(DeviceState *d, int n, QEMUFile *f) | 
 | { | 
 |     VirtIOPCIProxy *proxy = to_virtio_pci_proxy(d); | 
 |     VirtIODevice *vdev = virtio_bus_get_device(&proxy->bus); | 
 |  | 
 |     if (msix_present(&proxy->pci_dev)) | 
 |         qemu_put_be16(f, virtio_queue_vector(vdev, n)); | 
 | } | 
 |  | 
 | static int virtio_pci_load_config(DeviceState *d, QEMUFile *f) | 
 | { | 
 |     VirtIOPCIProxy *proxy = to_virtio_pci_proxy(d); | 
 |     VirtIODevice *vdev = virtio_bus_get_device(&proxy->bus); | 
 |  | 
 |     int ret; | 
 |     ret = pci_device_load(&proxy->pci_dev, f); | 
 |     if (ret) { | 
 |         return ret; | 
 |     } | 
 |     msix_unuse_all_vectors(&proxy->pci_dev); | 
 |     msix_load(&proxy->pci_dev, f); | 
 |     if (msix_present(&proxy->pci_dev)) { | 
 |         qemu_get_be16s(f, &vdev->config_vector); | 
 |     } else { | 
 |         vdev->config_vector = VIRTIO_NO_VECTOR; | 
 |     } | 
 |     if (vdev->config_vector != VIRTIO_NO_VECTOR) { | 
 |         return msix_vector_use(&proxy->pci_dev, vdev->config_vector); | 
 |     } | 
 |     return 0; | 
 | } | 
 |  | 
 | static int virtio_pci_load_queue(DeviceState *d, int n, QEMUFile *f) | 
 | { | 
 |     VirtIOPCIProxy *proxy = to_virtio_pci_proxy(d); | 
 |     VirtIODevice *vdev = virtio_bus_get_device(&proxy->bus); | 
 |  | 
 |     uint16_t vector; | 
 |     if (msix_present(&proxy->pci_dev)) { | 
 |         qemu_get_be16s(f, &vector); | 
 |     } else { | 
 |         vector = VIRTIO_NO_VECTOR; | 
 |     } | 
 |     virtio_queue_set_vector(vdev, n, vector); | 
 |     if (vector != VIRTIO_NO_VECTOR) { | 
 |         return msix_vector_use(&proxy->pci_dev, vector); | 
 |     } | 
 |     return 0; | 
 | } | 
 |  | 
 | static int virtio_pci_set_host_notifier_internal(VirtIOPCIProxy *proxy, | 
 |                                                  int n, bool assign, bool set_handler) | 
 | { | 
 |     VirtIODevice *vdev = virtio_bus_get_device(&proxy->bus); | 
 |     VirtQueue *vq = virtio_get_queue(vdev, n); | 
 |     EventNotifier *notifier = virtio_queue_get_host_notifier(vq); | 
 |     int r = 0; | 
 |  | 
 |     if (assign) { | 
 |         r = event_notifier_init(notifier, 1); | 
 |         if (r < 0) { | 
 |             error_report("%s: unable to init event notifier: %d", | 
 |                          __func__, r); | 
 |             return r; | 
 |         } | 
 |         virtio_queue_set_host_notifier_fd_handler(vq, true, set_handler); | 
 |         memory_region_add_eventfd(&proxy->bar, VIRTIO_PCI_QUEUE_NOTIFY, 2, | 
 |                                   true, n, notifier); | 
 |     } else { | 
 |         memory_region_del_eventfd(&proxy->bar, VIRTIO_PCI_QUEUE_NOTIFY, 2, | 
 |                                   true, n, notifier); | 
 |         virtio_queue_set_host_notifier_fd_handler(vq, false, false); | 
 |         event_notifier_cleanup(notifier); | 
 |     } | 
 |     return r; | 
 | } | 
 |  | 
 | static void virtio_pci_start_ioeventfd(VirtIOPCIProxy *proxy) | 
 | { | 
 |     VirtIODevice *vdev = virtio_bus_get_device(&proxy->bus); | 
 |     int n, r; | 
 |  | 
 |     if (!(proxy->flags & VIRTIO_PCI_FLAG_USE_IOEVENTFD) || | 
 |         proxy->ioeventfd_disabled || | 
 |         proxy->ioeventfd_started) { | 
 |         return; | 
 |     } | 
 |  | 
 |     for (n = 0; n < VIRTIO_PCI_QUEUE_MAX; n++) { | 
 |         if (!virtio_queue_get_num(vdev, n)) { | 
 |             continue; | 
 |         } | 
 |  | 
 |         r = virtio_pci_set_host_notifier_internal(proxy, n, true, true); | 
 |         if (r < 0) { | 
 |             goto assign_error; | 
 |         } | 
 |     } | 
 |     proxy->ioeventfd_started = true; | 
 |     return; | 
 |  | 
 | assign_error: | 
 |     while (--n >= 0) { | 
 |         if (!virtio_queue_get_num(vdev, n)) { | 
 |             continue; | 
 |         } | 
 |  | 
 |         r = virtio_pci_set_host_notifier_internal(proxy, n, false, false); | 
 |         assert(r >= 0); | 
 |     } | 
 |     proxy->ioeventfd_started = false; | 
 |     error_report("%s: failed. Fallback to a userspace (slower).", __func__); | 
 | } | 
 |  | 
 | static void virtio_pci_stop_ioeventfd(VirtIOPCIProxy *proxy) | 
 | { | 
 |     VirtIODevice *vdev = virtio_bus_get_device(&proxy->bus); | 
 |     int r; | 
 |     int n; | 
 |  | 
 |     if (!proxy->ioeventfd_started) { | 
 |         return; | 
 |     } | 
 |  | 
 |     for (n = 0; n < VIRTIO_PCI_QUEUE_MAX; n++) { | 
 |         if (!virtio_queue_get_num(vdev, n)) { | 
 |             continue; | 
 |         } | 
 |  | 
 |         r = virtio_pci_set_host_notifier_internal(proxy, n, false, false); | 
 |         assert(r >= 0); | 
 |     } | 
 |     proxy->ioeventfd_started = false; | 
 | } | 
 |  | 
 | static void virtio_ioport_write(void *opaque, uint32_t addr, uint32_t val) | 
 | { | 
 |     VirtIOPCIProxy *proxy = opaque; | 
 |     VirtIODevice *vdev = virtio_bus_get_device(&proxy->bus); | 
 |     hwaddr pa; | 
 |  | 
 |     switch (addr) { | 
 |     case VIRTIO_PCI_GUEST_FEATURES: | 
 |         /* Guest does not negotiate properly?  We have to assume nothing. */ | 
 |         if (val & (1 << VIRTIO_F_BAD_FEATURE)) { | 
 |             val = virtio_bus_get_vdev_bad_features(&proxy->bus); | 
 |         } | 
 |         virtio_set_features(vdev, val); | 
 |         break; | 
 |     case VIRTIO_PCI_QUEUE_PFN: | 
 |         pa = (hwaddr)val << VIRTIO_PCI_QUEUE_ADDR_SHIFT; | 
 |         if (pa == 0) { | 
 |             virtio_pci_stop_ioeventfd(proxy); | 
 |             virtio_reset(vdev); | 
 |             msix_unuse_all_vectors(&proxy->pci_dev); | 
 |         } | 
 |         else | 
 |             virtio_queue_set_addr(vdev, vdev->queue_sel, pa); | 
 |         break; | 
 |     case VIRTIO_PCI_QUEUE_SEL: | 
 |         if (val < VIRTIO_PCI_QUEUE_MAX) | 
 |             vdev->queue_sel = val; | 
 |         break; | 
 |     case VIRTIO_PCI_QUEUE_NOTIFY: | 
 |         if (val < VIRTIO_PCI_QUEUE_MAX) { | 
 |             virtio_queue_notify(vdev, val); | 
 |         } | 
 |         break; | 
 |     case VIRTIO_PCI_STATUS: | 
 |         if (!(val & VIRTIO_CONFIG_S_DRIVER_OK)) { | 
 |             virtio_pci_stop_ioeventfd(proxy); | 
 |         } | 
 |  | 
 |         virtio_set_status(vdev, val & 0xFF); | 
 |  | 
 |         if (val & VIRTIO_CONFIG_S_DRIVER_OK) { | 
 |             virtio_pci_start_ioeventfd(proxy); | 
 |         } | 
 |  | 
 |         if (vdev->status == 0) { | 
 |             virtio_reset(vdev); | 
 |             msix_unuse_all_vectors(&proxy->pci_dev); | 
 |         } | 
 |  | 
 |         /* Linux before 2.6.34 drives the device without enabling | 
 |            the PCI device bus master bit. Enable it automatically | 
 |            for the guest. This is a PCI spec violation but so is | 
 |            initiating DMA with bus master bit clear. */ | 
 |         if (val == (VIRTIO_CONFIG_S_ACKNOWLEDGE | VIRTIO_CONFIG_S_DRIVER)) { | 
 |             pci_default_write_config(&proxy->pci_dev, PCI_COMMAND, | 
 |                                      proxy->pci_dev.config[PCI_COMMAND] | | 
 |                                      PCI_COMMAND_MASTER, 1); | 
 |         } | 
 |  | 
 |         /* Linux before 2.6.34 sets the device as OK without enabling | 
 |            the PCI device bus master bit. In this case we need to disable | 
 |            some safety checks. */ | 
 |         if ((val & VIRTIO_CONFIG_S_DRIVER_OK) && | 
 |             !(proxy->pci_dev.config[PCI_COMMAND] & PCI_COMMAND_MASTER)) { | 
 |             proxy->flags |= VIRTIO_PCI_FLAG_BUS_MASTER_BUG; | 
 |         } | 
 |         break; | 
 |     case VIRTIO_MSI_CONFIG_VECTOR: | 
 |         msix_vector_unuse(&proxy->pci_dev, vdev->config_vector); | 
 |         /* Make it possible for guest to discover an error took place. */ | 
 |         if (msix_vector_use(&proxy->pci_dev, val) < 0) | 
 |             val = VIRTIO_NO_VECTOR; | 
 |         vdev->config_vector = val; | 
 |         break; | 
 |     case VIRTIO_MSI_QUEUE_VECTOR: | 
 |         msix_vector_unuse(&proxy->pci_dev, | 
 |                           virtio_queue_vector(vdev, vdev->queue_sel)); | 
 |         /* Make it possible for guest to discover an error took place. */ | 
 |         if (msix_vector_use(&proxy->pci_dev, val) < 0) | 
 |             val = VIRTIO_NO_VECTOR; | 
 |         virtio_queue_set_vector(vdev, vdev->queue_sel, val); | 
 |         break; | 
 |     default: | 
 |         error_report("%s: unexpected address 0x%x value 0x%x", | 
 |                      __func__, addr, val); | 
 |         break; | 
 |     } | 
 | } | 
 |  | 
 | static uint32_t virtio_ioport_read(VirtIOPCIProxy *proxy, uint32_t addr) | 
 | { | 
 |     VirtIODevice *vdev = virtio_bus_get_device(&proxy->bus); | 
 |     uint32_t ret = 0xFFFFFFFF; | 
 |  | 
 |     switch (addr) { | 
 |     case VIRTIO_PCI_HOST_FEATURES: | 
 |         ret = proxy->host_features; | 
 |         break; | 
 |     case VIRTIO_PCI_GUEST_FEATURES: | 
 |         ret = vdev->guest_features; | 
 |         break; | 
 |     case VIRTIO_PCI_QUEUE_PFN: | 
 |         ret = virtio_queue_get_addr(vdev, vdev->queue_sel) | 
 |               >> VIRTIO_PCI_QUEUE_ADDR_SHIFT; | 
 |         break; | 
 |     case VIRTIO_PCI_QUEUE_NUM: | 
 |         ret = virtio_queue_get_num(vdev, vdev->queue_sel); | 
 |         break; | 
 |     case VIRTIO_PCI_QUEUE_SEL: | 
 |         ret = vdev->queue_sel; | 
 |         break; | 
 |     case VIRTIO_PCI_STATUS: | 
 |         ret = vdev->status; | 
 |         break; | 
 |     case VIRTIO_PCI_ISR: | 
 |         /* reading from the ISR also clears it. */ | 
 |         ret = vdev->isr; | 
 |         vdev->isr = 0; | 
 |         pci_irq_deassert(&proxy->pci_dev); | 
 |         break; | 
 |     case VIRTIO_MSI_CONFIG_VECTOR: | 
 |         ret = vdev->config_vector; | 
 |         break; | 
 |     case VIRTIO_MSI_QUEUE_VECTOR: | 
 |         ret = virtio_queue_vector(vdev, vdev->queue_sel); | 
 |         break; | 
 |     default: | 
 |         break; | 
 |     } | 
 |  | 
 |     return ret; | 
 | } | 
 |  | 
 | static uint64_t virtio_pci_config_read(void *opaque, hwaddr addr, | 
 |                                        unsigned size) | 
 | { | 
 |     VirtIOPCIProxy *proxy = opaque; | 
 |     VirtIODevice *vdev = virtio_bus_get_device(&proxy->bus); | 
 |     uint32_t config = VIRTIO_PCI_CONFIG(&proxy->pci_dev); | 
 |     uint64_t val = 0; | 
 |     if (addr < config) { | 
 |         return virtio_ioport_read(proxy, addr); | 
 |     } | 
 |     addr -= config; | 
 |  | 
 |     switch (size) { | 
 |     case 1: | 
 |         val = virtio_config_readb(vdev, addr); | 
 |         break; | 
 |     case 2: | 
 |         val = virtio_config_readw(vdev, addr); | 
 |         if (virtio_is_big_endian(vdev)) { | 
 |             val = bswap16(val); | 
 |         } | 
 |         break; | 
 |     case 4: | 
 |         val = virtio_config_readl(vdev, addr); | 
 |         if (virtio_is_big_endian(vdev)) { | 
 |             val = bswap32(val); | 
 |         } | 
 |         break; | 
 |     } | 
 |     return val; | 
 | } | 
 |  | 
 | static void virtio_pci_config_write(void *opaque, hwaddr addr, | 
 |                                     uint64_t val, unsigned size) | 
 | { | 
 |     VirtIOPCIProxy *proxy = opaque; | 
 |     uint32_t config = VIRTIO_PCI_CONFIG(&proxy->pci_dev); | 
 |     VirtIODevice *vdev = virtio_bus_get_device(&proxy->bus); | 
 |     if (addr < config) { | 
 |         virtio_ioport_write(proxy, addr, val); | 
 |         return; | 
 |     } | 
 |     addr -= config; | 
 |     /* | 
 |      * Virtio-PCI is odd. Ioports are LE but config space is target native | 
 |      * endian. | 
 |      */ | 
 |     switch (size) { | 
 |     case 1: | 
 |         virtio_config_writeb(vdev, addr, val); | 
 |         break; | 
 |     case 2: | 
 |         if (virtio_is_big_endian(vdev)) { | 
 |             val = bswap16(val); | 
 |         } | 
 |         virtio_config_writew(vdev, addr, val); | 
 |         break; | 
 |     case 4: | 
 |         if (virtio_is_big_endian(vdev)) { | 
 |             val = bswap32(val); | 
 |         } | 
 |         virtio_config_writel(vdev, addr, val); | 
 |         break; | 
 |     } | 
 | } | 
 |  | 
 | static const MemoryRegionOps virtio_pci_config_ops = { | 
 |     .read = virtio_pci_config_read, | 
 |     .write = virtio_pci_config_write, | 
 |     .impl = { | 
 |         .min_access_size = 1, | 
 |         .max_access_size = 4, | 
 |     }, | 
 |     .endianness = DEVICE_LITTLE_ENDIAN, | 
 | }; | 
 |  | 
 | static void virtio_write_config(PCIDevice *pci_dev, uint32_t address, | 
 |                                 uint32_t val, int len) | 
 | { | 
 |     VirtIOPCIProxy *proxy = DO_UPCAST(VirtIOPCIProxy, pci_dev, pci_dev); | 
 |     VirtIODevice *vdev = virtio_bus_get_device(&proxy->bus); | 
 |  | 
 |     pci_default_write_config(pci_dev, address, val, len); | 
 |  | 
 |     if (range_covers_byte(address, len, PCI_COMMAND) && | 
 |         !(pci_dev->config[PCI_COMMAND] & PCI_COMMAND_MASTER) && | 
 |         !(proxy->flags & VIRTIO_PCI_FLAG_BUS_MASTER_BUG)) { | 
 |         virtio_pci_stop_ioeventfd(proxy); | 
 |         virtio_set_status(vdev, vdev->status & ~VIRTIO_CONFIG_S_DRIVER_OK); | 
 |     } | 
 | } | 
 |  | 
 | static unsigned virtio_pci_get_features(DeviceState *d) | 
 | { | 
 |     VirtIOPCIProxy *proxy = to_virtio_pci_proxy(d); | 
 |     return proxy->host_features; | 
 | } | 
 |  | 
 | static int kvm_virtio_pci_vq_vector_use(VirtIOPCIProxy *proxy, | 
 |                                         unsigned int queue_no, | 
 |                                         unsigned int vector, | 
 |                                         MSIMessage msg) | 
 | { | 
 |     VirtIOIRQFD *irqfd = &proxy->vector_irqfd[vector]; | 
 |     int ret; | 
 |  | 
 |     if (irqfd->users == 0) { | 
 |         ret = kvm_irqchip_add_msi_route(kvm_state, msg); | 
 |         if (ret < 0) { | 
 |             return ret; | 
 |         } | 
 |         irqfd->virq = ret; | 
 |     } | 
 |     irqfd->users++; | 
 |     return 0; | 
 | } | 
 |  | 
 | static void kvm_virtio_pci_vq_vector_release(VirtIOPCIProxy *proxy, | 
 |                                              unsigned int vector) | 
 | { | 
 |     VirtIOIRQFD *irqfd = &proxy->vector_irqfd[vector]; | 
 |     if (--irqfd->users == 0) { | 
 |         kvm_irqchip_release_virq(kvm_state, irqfd->virq); | 
 |     } | 
 | } | 
 |  | 
 | static int kvm_virtio_pci_irqfd_use(VirtIOPCIProxy *proxy, | 
 |                                  unsigned int queue_no, | 
 |                                  unsigned int vector) | 
 | { | 
 |     VirtIOIRQFD *irqfd = &proxy->vector_irqfd[vector]; | 
 |     VirtIODevice *vdev = virtio_bus_get_device(&proxy->bus); | 
 |     VirtQueue *vq = virtio_get_queue(vdev, queue_no); | 
 |     EventNotifier *n = virtio_queue_get_guest_notifier(vq); | 
 |     int ret; | 
 |     ret = kvm_irqchip_add_irqfd_notifier(kvm_state, n, NULL, irqfd->virq); | 
 |     return ret; | 
 | } | 
 |  | 
 | static void kvm_virtio_pci_irqfd_release(VirtIOPCIProxy *proxy, | 
 |                                       unsigned int queue_no, | 
 |                                       unsigned int vector) | 
 | { | 
 |     VirtIODevice *vdev = virtio_bus_get_device(&proxy->bus); | 
 |     VirtQueue *vq = virtio_get_queue(vdev, queue_no); | 
 |     EventNotifier *n = virtio_queue_get_guest_notifier(vq); | 
 |     VirtIOIRQFD *irqfd = &proxy->vector_irqfd[vector]; | 
 |     int ret; | 
 |  | 
 |     ret = kvm_irqchip_remove_irqfd_notifier(kvm_state, n, irqfd->virq); | 
 |     assert(ret == 0); | 
 | } | 
 |  | 
 | static int kvm_virtio_pci_vector_use(VirtIOPCIProxy *proxy, int nvqs) | 
 | { | 
 |     PCIDevice *dev = &proxy->pci_dev; | 
 |     VirtIODevice *vdev = virtio_bus_get_device(&proxy->bus); | 
 |     VirtioDeviceClass *k = VIRTIO_DEVICE_GET_CLASS(vdev); | 
 |     unsigned int vector; | 
 |     int ret, queue_no; | 
 |     MSIMessage msg; | 
 |  | 
 |     for (queue_no = 0; queue_no < nvqs; queue_no++) { | 
 |         if (!virtio_queue_get_num(vdev, queue_no)) { | 
 |             break; | 
 |         } | 
 |         vector = virtio_queue_vector(vdev, queue_no); | 
 |         if (vector >= msix_nr_vectors_allocated(dev)) { | 
 |             continue; | 
 |         } | 
 |         msg = msix_get_message(dev, vector); | 
 |         ret = kvm_virtio_pci_vq_vector_use(proxy, queue_no, vector, msg); | 
 |         if (ret < 0) { | 
 |             goto undo; | 
 |         } | 
 |         /* If guest supports masking, set up irqfd now. | 
 |          * Otherwise, delay until unmasked in the frontend. | 
 |          */ | 
 |         if (k->guest_notifier_mask) { | 
 |             ret = kvm_virtio_pci_irqfd_use(proxy, queue_no, vector); | 
 |             if (ret < 0) { | 
 |                 kvm_virtio_pci_vq_vector_release(proxy, vector); | 
 |                 goto undo; | 
 |             } | 
 |         } | 
 |     } | 
 |     return 0; | 
 |  | 
 | undo: | 
 |     while (--queue_no >= 0) { | 
 |         vector = virtio_queue_vector(vdev, queue_no); | 
 |         if (vector >= msix_nr_vectors_allocated(dev)) { | 
 |             continue; | 
 |         } | 
 |         if (k->guest_notifier_mask) { | 
 |             kvm_virtio_pci_irqfd_release(proxy, queue_no, vector); | 
 |         } | 
 |         kvm_virtio_pci_vq_vector_release(proxy, vector); | 
 |     } | 
 |     return ret; | 
 | } | 
 |  | 
 | static void kvm_virtio_pci_vector_release(VirtIOPCIProxy *proxy, int nvqs) | 
 | { | 
 |     PCIDevice *dev = &proxy->pci_dev; | 
 |     VirtIODevice *vdev = virtio_bus_get_device(&proxy->bus); | 
 |     unsigned int vector; | 
 |     int queue_no; | 
 |     VirtioDeviceClass *k = VIRTIO_DEVICE_GET_CLASS(vdev); | 
 |  | 
 |     for (queue_no = 0; queue_no < nvqs; queue_no++) { | 
 |         if (!virtio_queue_get_num(vdev, queue_no)) { | 
 |             break; | 
 |         } | 
 |         vector = virtio_queue_vector(vdev, queue_no); | 
 |         if (vector >= msix_nr_vectors_allocated(dev)) { | 
 |             continue; | 
 |         } | 
 |         /* If guest supports masking, clean up irqfd now. | 
 |          * Otherwise, it was cleaned when masked in the frontend. | 
 |          */ | 
 |         if (k->guest_notifier_mask) { | 
 |             kvm_virtio_pci_irqfd_release(proxy, queue_no, vector); | 
 |         } | 
 |         kvm_virtio_pci_vq_vector_release(proxy, vector); | 
 |     } | 
 | } | 
 |  | 
 | static int virtio_pci_vq_vector_unmask(VirtIOPCIProxy *proxy, | 
 |                                        unsigned int queue_no, | 
 |                                        unsigned int vector, | 
 |                                        MSIMessage msg) | 
 | { | 
 |     VirtIODevice *vdev = virtio_bus_get_device(&proxy->bus); | 
 |     VirtioDeviceClass *k = VIRTIO_DEVICE_GET_CLASS(vdev); | 
 |     VirtQueue *vq = virtio_get_queue(vdev, queue_no); | 
 |     EventNotifier *n = virtio_queue_get_guest_notifier(vq); | 
 |     VirtIOIRQFD *irqfd; | 
 |     int ret = 0; | 
 |  | 
 |     if (proxy->vector_irqfd) { | 
 |         irqfd = &proxy->vector_irqfd[vector]; | 
 |         if (irqfd->msg.data != msg.data || irqfd->msg.address != msg.address) { | 
 |             ret = kvm_irqchip_update_msi_route(kvm_state, irqfd->virq, msg); | 
 |             if (ret < 0) { | 
 |                 return ret; | 
 |             } | 
 |         } | 
 |     } | 
 |  | 
 |     /* If guest supports masking, irqfd is already setup, unmask it. | 
 |      * Otherwise, set it up now. | 
 |      */ | 
 |     if (k->guest_notifier_mask) { | 
 |         k->guest_notifier_mask(vdev, queue_no, false); | 
 |         /* Test after unmasking to avoid losing events. */ | 
 |         if (k->guest_notifier_pending && | 
 |             k->guest_notifier_pending(vdev, queue_no)) { | 
 |             event_notifier_set(n); | 
 |         } | 
 |     } else { | 
 |         ret = kvm_virtio_pci_irqfd_use(proxy, queue_no, vector); | 
 |     } | 
 |     return ret; | 
 | } | 
 |  | 
 | static void virtio_pci_vq_vector_mask(VirtIOPCIProxy *proxy, | 
 |                                              unsigned int queue_no, | 
 |                                              unsigned int vector) | 
 | { | 
 |     VirtIODevice *vdev = virtio_bus_get_device(&proxy->bus); | 
 |     VirtioDeviceClass *k = VIRTIO_DEVICE_GET_CLASS(vdev); | 
 |  | 
 |     /* If guest supports masking, keep irqfd but mask it. | 
 |      * Otherwise, clean it up now. | 
 |      */  | 
 |     if (k->guest_notifier_mask) { | 
 |         k->guest_notifier_mask(vdev, queue_no, true); | 
 |     } else { | 
 |         kvm_virtio_pci_irqfd_release(proxy, queue_no, vector); | 
 |     } | 
 | } | 
 |  | 
 | static int virtio_pci_vector_unmask(PCIDevice *dev, unsigned vector, | 
 |                                     MSIMessage msg) | 
 | { | 
 |     VirtIOPCIProxy *proxy = container_of(dev, VirtIOPCIProxy, pci_dev); | 
 |     VirtIODevice *vdev = virtio_bus_get_device(&proxy->bus); | 
 |     int ret, queue_no; | 
 |  | 
 |     for (queue_no = 0; queue_no < proxy->nvqs_with_notifiers; queue_no++) { | 
 |         if (!virtio_queue_get_num(vdev, queue_no)) { | 
 |             break; | 
 |         } | 
 |         if (virtio_queue_vector(vdev, queue_no) != vector) { | 
 |             continue; | 
 |         } | 
 |         ret = virtio_pci_vq_vector_unmask(proxy, queue_no, vector, msg); | 
 |         if (ret < 0) { | 
 |             goto undo; | 
 |         } | 
 |     } | 
 |     return 0; | 
 |  | 
 | undo: | 
 |     while (--queue_no >= 0) { | 
 |         if (virtio_queue_vector(vdev, queue_no) != vector) { | 
 |             continue; | 
 |         } | 
 |         virtio_pci_vq_vector_mask(proxy, queue_no, vector); | 
 |     } | 
 |     return ret; | 
 | } | 
 |  | 
 | static void virtio_pci_vector_mask(PCIDevice *dev, unsigned vector) | 
 | { | 
 |     VirtIOPCIProxy *proxy = container_of(dev, VirtIOPCIProxy, pci_dev); | 
 |     VirtIODevice *vdev = virtio_bus_get_device(&proxy->bus); | 
 |     int queue_no; | 
 |  | 
 |     for (queue_no = 0; queue_no < proxy->nvqs_with_notifiers; queue_no++) { | 
 |         if (!virtio_queue_get_num(vdev, queue_no)) { | 
 |             break; | 
 |         } | 
 |         if (virtio_queue_vector(vdev, queue_no) != vector) { | 
 |             continue; | 
 |         } | 
 |         virtio_pci_vq_vector_mask(proxy, queue_no, vector); | 
 |     } | 
 | } | 
 |  | 
 | static void virtio_pci_vector_poll(PCIDevice *dev, | 
 |                                    unsigned int vector_start, | 
 |                                    unsigned int vector_end) | 
 | { | 
 |     VirtIOPCIProxy *proxy = container_of(dev, VirtIOPCIProxy, pci_dev); | 
 |     VirtIODevice *vdev = virtio_bus_get_device(&proxy->bus); | 
 |     VirtioDeviceClass *k = VIRTIO_DEVICE_GET_CLASS(vdev); | 
 |     int queue_no; | 
 |     unsigned int vector; | 
 |     EventNotifier *notifier; | 
 |     VirtQueue *vq; | 
 |  | 
 |     for (queue_no = 0; queue_no < proxy->nvqs_with_notifiers; queue_no++) { | 
 |         if (!virtio_queue_get_num(vdev, queue_no)) { | 
 |             break; | 
 |         } | 
 |         vector = virtio_queue_vector(vdev, queue_no); | 
 |         if (vector < vector_start || vector >= vector_end || | 
 |             !msix_is_masked(dev, vector)) { | 
 |             continue; | 
 |         } | 
 |         vq = virtio_get_queue(vdev, queue_no); | 
 |         notifier = virtio_queue_get_guest_notifier(vq); | 
 |         if (k->guest_notifier_pending) { | 
 |             if (k->guest_notifier_pending(vdev, queue_no)) { | 
 |                 msix_set_pending(dev, vector); | 
 |             } | 
 |         } else if (event_notifier_test_and_clear(notifier)) { | 
 |             msix_set_pending(dev, vector); | 
 |         } | 
 |     } | 
 | } | 
 |  | 
 | static int virtio_pci_set_guest_notifier(DeviceState *d, int n, bool assign, | 
 |                                          bool with_irqfd) | 
 | { | 
 |     VirtIOPCIProxy *proxy = to_virtio_pci_proxy(d); | 
 |     VirtIODevice *vdev = virtio_bus_get_device(&proxy->bus); | 
 |     VirtioDeviceClass *vdc = VIRTIO_DEVICE_GET_CLASS(vdev); | 
 |     VirtQueue *vq = virtio_get_queue(vdev, n); | 
 |     EventNotifier *notifier = virtio_queue_get_guest_notifier(vq); | 
 |  | 
 |     if (assign) { | 
 |         int r = event_notifier_init(notifier, 0); | 
 |         if (r < 0) { | 
 |             return r; | 
 |         } | 
 |         virtio_queue_set_guest_notifier_fd_handler(vq, true, with_irqfd); | 
 |     } else { | 
 |         virtio_queue_set_guest_notifier_fd_handler(vq, false, with_irqfd); | 
 |         event_notifier_cleanup(notifier); | 
 |     } | 
 |  | 
 |     if (!msix_enabled(&proxy->pci_dev) && vdc->guest_notifier_mask) { | 
 |         vdc->guest_notifier_mask(vdev, n, !assign); | 
 |     } | 
 |  | 
 |     return 0; | 
 | } | 
 |  | 
 | static bool virtio_pci_query_guest_notifiers(DeviceState *d) | 
 | { | 
 |     VirtIOPCIProxy *proxy = to_virtio_pci_proxy(d); | 
 |     return msix_enabled(&proxy->pci_dev); | 
 | } | 
 |  | 
 | static int virtio_pci_set_guest_notifiers(DeviceState *d, int nvqs, bool assign) | 
 | { | 
 |     VirtIOPCIProxy *proxy = to_virtio_pci_proxy(d); | 
 |     VirtIODevice *vdev = virtio_bus_get_device(&proxy->bus); | 
 |     VirtioDeviceClass *k = VIRTIO_DEVICE_GET_CLASS(vdev); | 
 |     int r, n; | 
 |     bool with_irqfd = msix_enabled(&proxy->pci_dev) && | 
 |         kvm_msi_via_irqfd_enabled(); | 
 |  | 
 |     nvqs = MIN(nvqs, VIRTIO_PCI_QUEUE_MAX); | 
 |  | 
 |     /* When deassigning, pass a consistent nvqs value | 
 |      * to avoid leaking notifiers. | 
 |      */ | 
 |     assert(assign || nvqs == proxy->nvqs_with_notifiers); | 
 |  | 
 |     proxy->nvqs_with_notifiers = nvqs; | 
 |  | 
 |     /* Must unset vector notifier while guest notifier is still assigned */ | 
 |     if ((proxy->vector_irqfd || k->guest_notifier_mask) && !assign) { | 
 |         msix_unset_vector_notifiers(&proxy->pci_dev); | 
 |         if (proxy->vector_irqfd) { | 
 |             kvm_virtio_pci_vector_release(proxy, nvqs); | 
 |             g_free(proxy->vector_irqfd); | 
 |             proxy->vector_irqfd = NULL; | 
 |         } | 
 |     } | 
 |  | 
 |     for (n = 0; n < nvqs; n++) { | 
 |         if (!virtio_queue_get_num(vdev, n)) { | 
 |             break; | 
 |         } | 
 |  | 
 |         r = virtio_pci_set_guest_notifier(d, n, assign, with_irqfd); | 
 |         if (r < 0) { | 
 |             goto assign_error; | 
 |         } | 
 |     } | 
 |  | 
 |     /* Must set vector notifier after guest notifier has been assigned */ | 
 |     if ((with_irqfd || k->guest_notifier_mask) && assign) { | 
 |         if (with_irqfd) { | 
 |             proxy->vector_irqfd = | 
 |                 g_malloc0(sizeof(*proxy->vector_irqfd) * | 
 |                           msix_nr_vectors_allocated(&proxy->pci_dev)); | 
 |             r = kvm_virtio_pci_vector_use(proxy, nvqs); | 
 |             if (r < 0) { | 
 |                 goto assign_error; | 
 |             } | 
 |         } | 
 |         r = msix_set_vector_notifiers(&proxy->pci_dev, | 
 |                                       virtio_pci_vector_unmask, | 
 |                                       virtio_pci_vector_mask, | 
 |                                       virtio_pci_vector_poll); | 
 |         if (r < 0) { | 
 |             goto notifiers_error; | 
 |         } | 
 |     } | 
 |  | 
 |     return 0; | 
 |  | 
 | notifiers_error: | 
 |     if (with_irqfd) { | 
 |         assert(assign); | 
 |         kvm_virtio_pci_vector_release(proxy, nvqs); | 
 |     } | 
 |  | 
 | assign_error: | 
 |     /* We get here on assignment failure. Recover by undoing for VQs 0 .. n. */ | 
 |     assert(assign); | 
 |     while (--n >= 0) { | 
 |         virtio_pci_set_guest_notifier(d, n, !assign, with_irqfd); | 
 |     } | 
 |     return r; | 
 | } | 
 |  | 
 | static int virtio_pci_set_host_notifier(DeviceState *d, int n, bool assign) | 
 | { | 
 |     VirtIOPCIProxy *proxy = to_virtio_pci_proxy(d); | 
 |  | 
 |     /* Stop using ioeventfd for virtqueue kick if the device starts using host | 
 |      * notifiers.  This makes it easy to avoid stepping on each others' toes. | 
 |      */ | 
 |     proxy->ioeventfd_disabled = assign; | 
 |     if (assign) { | 
 |         virtio_pci_stop_ioeventfd(proxy); | 
 |     } | 
 |     /* We don't need to start here: it's not needed because backend | 
 |      * currently only stops on status change away from ok, | 
 |      * reset, vmstop and such. If we do add code to start here, | 
 |      * need to check vmstate, device state etc. */ | 
 |     return virtio_pci_set_host_notifier_internal(proxy, n, assign, false); | 
 | } | 
 |  | 
 | static void virtio_pci_vmstate_change(DeviceState *d, bool running) | 
 | { | 
 |     VirtIOPCIProxy *proxy = to_virtio_pci_proxy(d); | 
 |     VirtIODevice *vdev = virtio_bus_get_device(&proxy->bus); | 
 |  | 
 |     if (running) { | 
 |         /* Try to find out if the guest has bus master disabled, but is | 
 |            in ready state. Then we have a buggy guest OS. */ | 
 |         if ((vdev->status & VIRTIO_CONFIG_S_DRIVER_OK) && | 
 |             !(proxy->pci_dev.config[PCI_COMMAND] & PCI_COMMAND_MASTER)) { | 
 |             proxy->flags |= VIRTIO_PCI_FLAG_BUS_MASTER_BUG; | 
 |         } | 
 |         virtio_pci_start_ioeventfd(proxy); | 
 |     } else { | 
 |         virtio_pci_stop_ioeventfd(proxy); | 
 |     } | 
 | } | 
 |  | 
 | #ifdef CONFIG_VIRTFS | 
 | static int virtio_9p_init_pci(VirtIOPCIProxy *vpci_dev) | 
 | { | 
 |     V9fsPCIState *dev = VIRTIO_9P_PCI(vpci_dev); | 
 |     DeviceState *vdev = DEVICE(&dev->vdev); | 
 |  | 
 |     qdev_set_parent_bus(vdev, BUS(&vpci_dev->bus)); | 
 |     if (qdev_init(vdev) < 0) { | 
 |         return -1; | 
 |     } | 
 |     return 0; | 
 | } | 
 |  | 
 | static Property virtio_9p_pci_properties[] = { | 
 |     DEFINE_PROP_BIT("ioeventfd", VirtIOPCIProxy, flags, | 
 |                     VIRTIO_PCI_FLAG_USE_IOEVENTFD_BIT, true), | 
 |     DEFINE_PROP_UINT32("vectors", VirtIOPCIProxy, nvectors, 2), | 
 |     DEFINE_PROP_END_OF_LIST(), | 
 | }; | 
 |  | 
 | static void virtio_9p_pci_class_init(ObjectClass *klass, void *data) | 
 | { | 
 |     DeviceClass *dc = DEVICE_CLASS(klass); | 
 |     PCIDeviceClass *pcidev_k = PCI_DEVICE_CLASS(klass); | 
 |     VirtioPCIClass *k = VIRTIO_PCI_CLASS(klass); | 
 |  | 
 |     k->init = virtio_9p_init_pci; | 
 |     pcidev_k->vendor_id = PCI_VENDOR_ID_REDHAT_QUMRANET; | 
 |     pcidev_k->device_id = PCI_DEVICE_ID_VIRTIO_9P; | 
 |     pcidev_k->revision = VIRTIO_PCI_ABI_VERSION; | 
 |     pcidev_k->class_id = 0x2; | 
 |     set_bit(DEVICE_CATEGORY_STORAGE, dc->categories); | 
 |     dc->props = virtio_9p_pci_properties; | 
 | } | 
 |  | 
 | static void virtio_9p_pci_instance_init(Object *obj) | 
 | { | 
 |     V9fsPCIState *dev = VIRTIO_9P_PCI(obj); | 
 |  | 
 |     virtio_instance_init_common(obj, &dev->vdev, sizeof(dev->vdev), | 
 |                                 TYPE_VIRTIO_9P); | 
 | } | 
 |  | 
 | static const TypeInfo virtio_9p_pci_info = { | 
 |     .name          = TYPE_VIRTIO_9P_PCI, | 
 |     .parent        = TYPE_VIRTIO_PCI, | 
 |     .instance_size = sizeof(V9fsPCIState), | 
 |     .instance_init = virtio_9p_pci_instance_init, | 
 |     .class_init    = virtio_9p_pci_class_init, | 
 | }; | 
 | #endif /* CONFIG_VIRTFS */ | 
 |  | 
 | /* | 
 |  * virtio-pci: This is the PCIDevice which has a virtio-pci-bus. | 
 |  */ | 
 |  | 
 | /* This is called by virtio-bus just after the device is plugged. */ | 
 | static void virtio_pci_device_plugged(DeviceState *d) | 
 | { | 
 |     VirtIOPCIProxy *proxy = VIRTIO_PCI(d); | 
 |     VirtioBusState *bus = &proxy->bus; | 
 |     uint8_t *config; | 
 |     uint32_t size; | 
 |  | 
 |     config = proxy->pci_dev.config; | 
 |     if (proxy->class_code) { | 
 |         pci_config_set_class(config, proxy->class_code); | 
 |     } | 
 |     pci_set_word(config + PCI_SUBSYSTEM_VENDOR_ID, | 
 |                  pci_get_word(config + PCI_VENDOR_ID)); | 
 |     pci_set_word(config + PCI_SUBSYSTEM_ID, virtio_bus_get_vdev_id(bus)); | 
 |     config[PCI_INTERRUPT_PIN] = 1; | 
 |  | 
 |     if (proxy->nvectors && | 
 |         msix_init_exclusive_bar(&proxy->pci_dev, proxy->nvectors, 1)) { | 
 |         error_report("unable to init msix vectors to %" PRIu32, | 
 |                      proxy->nvectors); | 
 |         proxy->nvectors = 0; | 
 |     } | 
 |  | 
 |     proxy->pci_dev.config_write = virtio_write_config; | 
 |  | 
 |     size = VIRTIO_PCI_REGION_SIZE(&proxy->pci_dev) | 
 |          + virtio_bus_get_vdev_config_len(bus); | 
 |     if (size & (size - 1)) { | 
 |         size = 1 << qemu_fls(size); | 
 |     } | 
 |  | 
 |     memory_region_init_io(&proxy->bar, OBJECT(proxy), &virtio_pci_config_ops, | 
 |                           proxy, "virtio-pci", size); | 
 |     pci_register_bar(&proxy->pci_dev, 0, PCI_BASE_ADDRESS_SPACE_IO, | 
 |                      &proxy->bar); | 
 |  | 
 |     if (!kvm_has_many_ioeventfds()) { | 
 |         proxy->flags &= ~VIRTIO_PCI_FLAG_USE_IOEVENTFD; | 
 |     } | 
 |  | 
 |     proxy->host_features |= 0x1 << VIRTIO_F_NOTIFY_ON_EMPTY; | 
 |     proxy->host_features |= 0x1 << VIRTIO_F_BAD_FEATURE; | 
 |     proxy->host_features = virtio_bus_get_vdev_features(bus, | 
 |                                                       proxy->host_features); | 
 | } | 
 |  | 
 | static void virtio_pci_device_unplugged(DeviceState *d) | 
 | { | 
 |     VirtIOPCIProxy *proxy = VIRTIO_PCI(d); | 
 |  | 
 |     virtio_pci_stop_ioeventfd(proxy); | 
 | } | 
 |  | 
 | static int virtio_pci_init(PCIDevice *pci_dev) | 
 | { | 
 |     VirtIOPCIProxy *dev = VIRTIO_PCI(pci_dev); | 
 |     VirtioPCIClass *k = VIRTIO_PCI_GET_CLASS(pci_dev); | 
 |     virtio_pci_bus_new(&dev->bus, sizeof(dev->bus), dev); | 
 |     if (k->init != NULL) { | 
 |         return k->init(dev); | 
 |     } | 
 |     return 0; | 
 | } | 
 |  | 
 | static void virtio_pci_exit(PCIDevice *pci_dev) | 
 | { | 
 |     msix_uninit_exclusive_bar(pci_dev); | 
 | } | 
 |  | 
 | static void virtio_pci_reset(DeviceState *qdev) | 
 | { | 
 |     VirtIOPCIProxy *proxy = VIRTIO_PCI(qdev); | 
 |     VirtioBusState *bus = VIRTIO_BUS(&proxy->bus); | 
 |     virtio_pci_stop_ioeventfd(proxy); | 
 |     virtio_bus_reset(bus); | 
 |     msix_unuse_all_vectors(&proxy->pci_dev); | 
 |     proxy->flags &= ~VIRTIO_PCI_FLAG_BUS_MASTER_BUG; | 
 | } | 
 |  | 
 | static Property virtio_pci_properties[] = { | 
 |     DEFINE_VIRTIO_COMMON_FEATURES(VirtIOPCIProxy, host_features), | 
 |     DEFINE_PROP_END_OF_LIST(), | 
 | }; | 
 |  | 
 | static void virtio_pci_class_init(ObjectClass *klass, void *data) | 
 | { | 
 |     DeviceClass *dc = DEVICE_CLASS(klass); | 
 |     PCIDeviceClass *k = PCI_DEVICE_CLASS(klass); | 
 |  | 
 |     dc->props = virtio_pci_properties; | 
 |     k->init = virtio_pci_init; | 
 |     k->exit = virtio_pci_exit; | 
 |     k->vendor_id = PCI_VENDOR_ID_REDHAT_QUMRANET; | 
 |     k->revision = VIRTIO_PCI_ABI_VERSION; | 
 |     k->class_id = PCI_CLASS_OTHERS; | 
 |     dc->reset = virtio_pci_reset; | 
 | } | 
 |  | 
 | static const TypeInfo virtio_pci_info = { | 
 |     .name          = TYPE_VIRTIO_PCI, | 
 |     .parent        = TYPE_PCI_DEVICE, | 
 |     .instance_size = sizeof(VirtIOPCIProxy), | 
 |     .class_init    = virtio_pci_class_init, | 
 |     .class_size    = sizeof(VirtioPCIClass), | 
 |     .abstract      = true, | 
 | }; | 
 |  | 
 | /* virtio-blk-pci */ | 
 |  | 
 | static Property virtio_blk_pci_properties[] = { | 
 |     DEFINE_PROP_UINT32("class", VirtIOPCIProxy, class_code, 0), | 
 |     DEFINE_PROP_BIT("ioeventfd", VirtIOPCIProxy, flags, | 
 |                     VIRTIO_PCI_FLAG_USE_IOEVENTFD_BIT, true), | 
 |     DEFINE_PROP_UINT32("vectors", VirtIOPCIProxy, nvectors, 2), | 
 |     DEFINE_PROP_END_OF_LIST(), | 
 | }; | 
 |  | 
 | static int virtio_blk_pci_init(VirtIOPCIProxy *vpci_dev) | 
 | { | 
 |     VirtIOBlkPCI *dev = VIRTIO_BLK_PCI(vpci_dev); | 
 |     DeviceState *vdev = DEVICE(&dev->vdev); | 
 |     qdev_set_parent_bus(vdev, BUS(&vpci_dev->bus)); | 
 |     if (qdev_init(vdev) < 0) { | 
 |         return -1; | 
 |     } | 
 |     return 0; | 
 | } | 
 |  | 
 | static void virtio_blk_pci_class_init(ObjectClass *klass, void *data) | 
 | { | 
 |     DeviceClass *dc = DEVICE_CLASS(klass); | 
 |     VirtioPCIClass *k = VIRTIO_PCI_CLASS(klass); | 
 |     PCIDeviceClass *pcidev_k = PCI_DEVICE_CLASS(klass); | 
 |  | 
 |     set_bit(DEVICE_CATEGORY_STORAGE, dc->categories); | 
 |     dc->props = virtio_blk_pci_properties; | 
 |     k->init = virtio_blk_pci_init; | 
 |     pcidev_k->vendor_id = PCI_VENDOR_ID_REDHAT_QUMRANET; | 
 |     pcidev_k->device_id = PCI_DEVICE_ID_VIRTIO_BLOCK; | 
 |     pcidev_k->revision = VIRTIO_PCI_ABI_VERSION; | 
 |     pcidev_k->class_id = PCI_CLASS_STORAGE_SCSI; | 
 | } | 
 |  | 
 | static void virtio_blk_pci_instance_init(Object *obj) | 
 | { | 
 |     VirtIOBlkPCI *dev = VIRTIO_BLK_PCI(obj); | 
 |  | 
 |     virtio_instance_init_common(obj, &dev->vdev, sizeof(dev->vdev), | 
 |                                 TYPE_VIRTIO_BLK); | 
 |     object_property_add_alias(obj, "iothread", OBJECT(&dev->vdev),"iothread", | 
 |                               &error_abort); | 
 |     object_property_add_alias(obj, "bootindex", OBJECT(&dev->vdev), | 
 |                               "bootindex", &error_abort); | 
 | } | 
 |  | 
 | static const TypeInfo virtio_blk_pci_info = { | 
 |     .name          = TYPE_VIRTIO_BLK_PCI, | 
 |     .parent        = TYPE_VIRTIO_PCI, | 
 |     .instance_size = sizeof(VirtIOBlkPCI), | 
 |     .instance_init = virtio_blk_pci_instance_init, | 
 |     .class_init    = virtio_blk_pci_class_init, | 
 | }; | 
 |  | 
 | /* virtio-scsi-pci */ | 
 |  | 
 | static Property virtio_scsi_pci_properties[] = { | 
 |     DEFINE_PROP_BIT("ioeventfd", VirtIOPCIProxy, flags, | 
 |                     VIRTIO_PCI_FLAG_USE_IOEVENTFD_BIT, true), | 
 |     DEFINE_PROP_UINT32("vectors", VirtIOPCIProxy, nvectors, | 
 |                        DEV_NVECTORS_UNSPECIFIED), | 
 |     DEFINE_VIRTIO_SCSI_FEATURES(VirtIOPCIProxy, host_features), | 
 |     DEFINE_PROP_END_OF_LIST(), | 
 | }; | 
 |  | 
 | static int virtio_scsi_pci_init_pci(VirtIOPCIProxy *vpci_dev) | 
 | { | 
 |     VirtIOSCSIPCI *dev = VIRTIO_SCSI_PCI(vpci_dev); | 
 |     DeviceState *vdev = DEVICE(&dev->vdev); | 
 |     VirtIOSCSICommon *vs = VIRTIO_SCSI_COMMON(vdev); | 
 |     DeviceState *proxy = DEVICE(vpci_dev); | 
 |     char *bus_name; | 
 |  | 
 |     if (vpci_dev->nvectors == DEV_NVECTORS_UNSPECIFIED) { | 
 |         vpci_dev->nvectors = vs->conf.num_queues + 3; | 
 |     } | 
 |  | 
 |     /* | 
 |      * For command line compatibility, this sets the virtio-scsi-device bus | 
 |      * name as before. | 
 |      */ | 
 |     if (proxy->id) { | 
 |         bus_name = g_strdup_printf("%s.0", proxy->id); | 
 |         virtio_device_set_child_bus_name(VIRTIO_DEVICE(vdev), bus_name); | 
 |         g_free(bus_name); | 
 |     } | 
 |  | 
 |     qdev_set_parent_bus(vdev, BUS(&vpci_dev->bus)); | 
 |     if (qdev_init(vdev) < 0) { | 
 |         return -1; | 
 |     } | 
 |     return 0; | 
 | } | 
 |  | 
 | static void virtio_scsi_pci_class_init(ObjectClass *klass, void *data) | 
 | { | 
 |     DeviceClass *dc = DEVICE_CLASS(klass); | 
 |     VirtioPCIClass *k = VIRTIO_PCI_CLASS(klass); | 
 |     PCIDeviceClass *pcidev_k = PCI_DEVICE_CLASS(klass); | 
 |     k->init = virtio_scsi_pci_init_pci; | 
 |     set_bit(DEVICE_CATEGORY_STORAGE, dc->categories); | 
 |     dc->props = virtio_scsi_pci_properties; | 
 |     pcidev_k->vendor_id = PCI_VENDOR_ID_REDHAT_QUMRANET; | 
 |     pcidev_k->device_id = PCI_DEVICE_ID_VIRTIO_SCSI; | 
 |     pcidev_k->revision = 0x00; | 
 |     pcidev_k->class_id = PCI_CLASS_STORAGE_SCSI; | 
 | } | 
 |  | 
 | static void virtio_scsi_pci_instance_init(Object *obj) | 
 | { | 
 |     VirtIOSCSIPCI *dev = VIRTIO_SCSI_PCI(obj); | 
 |  | 
 |     virtio_instance_init_common(obj, &dev->vdev, sizeof(dev->vdev), | 
 |                                 TYPE_VIRTIO_SCSI); | 
 |     object_property_add_alias(obj, "iothread", OBJECT(&dev->vdev), "iothread", | 
 |                               &error_abort); | 
 | } | 
 |  | 
 | static const TypeInfo virtio_scsi_pci_info = { | 
 |     .name          = TYPE_VIRTIO_SCSI_PCI, | 
 |     .parent        = TYPE_VIRTIO_PCI, | 
 |     .instance_size = sizeof(VirtIOSCSIPCI), | 
 |     .instance_init = virtio_scsi_pci_instance_init, | 
 |     .class_init    = virtio_scsi_pci_class_init, | 
 | }; | 
 |  | 
 | /* vhost-scsi-pci */ | 
 |  | 
 | #ifdef CONFIG_VHOST_SCSI | 
 | static Property vhost_scsi_pci_properties[] = { | 
 |     DEFINE_PROP_UINT32("vectors", VirtIOPCIProxy, nvectors, | 
 |                        DEV_NVECTORS_UNSPECIFIED), | 
 |     DEFINE_PROP_END_OF_LIST(), | 
 | }; | 
 |  | 
 | static int vhost_scsi_pci_init_pci(VirtIOPCIProxy *vpci_dev) | 
 | { | 
 |     VHostSCSIPCI *dev = VHOST_SCSI_PCI(vpci_dev); | 
 |     DeviceState *vdev = DEVICE(&dev->vdev); | 
 |     VirtIOSCSICommon *vs = VIRTIO_SCSI_COMMON(vdev); | 
 |  | 
 |     if (vpci_dev->nvectors == DEV_NVECTORS_UNSPECIFIED) { | 
 |         vpci_dev->nvectors = vs->conf.num_queues + 3; | 
 |     } | 
 |  | 
 |     qdev_set_parent_bus(vdev, BUS(&vpci_dev->bus)); | 
 |     if (qdev_init(vdev) < 0) { | 
 |         return -1; | 
 |     } | 
 |     return 0; | 
 | } | 
 |  | 
 | static void vhost_scsi_pci_class_init(ObjectClass *klass, void *data) | 
 | { | 
 |     DeviceClass *dc = DEVICE_CLASS(klass); | 
 |     VirtioPCIClass *k = VIRTIO_PCI_CLASS(klass); | 
 |     PCIDeviceClass *pcidev_k = PCI_DEVICE_CLASS(klass); | 
 |     k->init = vhost_scsi_pci_init_pci; | 
 |     set_bit(DEVICE_CATEGORY_STORAGE, dc->categories); | 
 |     dc->props = vhost_scsi_pci_properties; | 
 |     pcidev_k->vendor_id = PCI_VENDOR_ID_REDHAT_QUMRANET; | 
 |     pcidev_k->device_id = PCI_DEVICE_ID_VIRTIO_SCSI; | 
 |     pcidev_k->revision = 0x00; | 
 |     pcidev_k->class_id = PCI_CLASS_STORAGE_SCSI; | 
 | } | 
 |  | 
 | static void vhost_scsi_pci_instance_init(Object *obj) | 
 | { | 
 |     VHostSCSIPCI *dev = VHOST_SCSI_PCI(obj); | 
 |  | 
 |     virtio_instance_init_common(obj, &dev->vdev, sizeof(dev->vdev), | 
 |                                 TYPE_VHOST_SCSI); | 
 | } | 
 |  | 
 | static const TypeInfo vhost_scsi_pci_info = { | 
 |     .name          = TYPE_VHOST_SCSI_PCI, | 
 |     .parent        = TYPE_VIRTIO_PCI, | 
 |     .instance_size = sizeof(VHostSCSIPCI), | 
 |     .instance_init = vhost_scsi_pci_instance_init, | 
 |     .class_init    = vhost_scsi_pci_class_init, | 
 | }; | 
 | #endif | 
 |  | 
 | /* virtio-balloon-pci */ | 
 |  | 
 | static void balloon_pci_stats_get_all(Object *obj, struct Visitor *v, | 
 |                                       void *opaque, const char *name, | 
 |                                       Error **errp) | 
 | { | 
 |     VirtIOBalloonPCI *dev = opaque; | 
 |     object_property_get(OBJECT(&dev->vdev), v, "guest-stats", errp); | 
 | } | 
 |  | 
 | static void balloon_pci_stats_get_poll_interval(Object *obj, struct Visitor *v, | 
 |                                                 void *opaque, const char *name, | 
 |                                                 Error **errp) | 
 | { | 
 |     VirtIOBalloonPCI *dev = opaque; | 
 |     object_property_get(OBJECT(&dev->vdev), v, "guest-stats-polling-interval", | 
 |                         errp); | 
 | } | 
 |  | 
 | static void balloon_pci_stats_set_poll_interval(Object *obj, struct Visitor *v, | 
 |                                                 void *opaque, const char *name, | 
 |                                                 Error **errp) | 
 | { | 
 |     VirtIOBalloonPCI *dev = opaque; | 
 |     object_property_set(OBJECT(&dev->vdev), v, "guest-stats-polling-interval", | 
 |                         errp); | 
 | } | 
 |  | 
 | static Property virtio_balloon_pci_properties[] = { | 
 |     DEFINE_PROP_UINT32("class", VirtIOPCIProxy, class_code, 0), | 
 |     DEFINE_PROP_END_OF_LIST(), | 
 | }; | 
 |  | 
 | static int virtio_balloon_pci_init(VirtIOPCIProxy *vpci_dev) | 
 | { | 
 |     VirtIOBalloonPCI *dev = VIRTIO_BALLOON_PCI(vpci_dev); | 
 |     DeviceState *vdev = DEVICE(&dev->vdev); | 
 |  | 
 |     if (vpci_dev->class_code != PCI_CLASS_OTHERS && | 
 |         vpci_dev->class_code != PCI_CLASS_MEMORY_RAM) { /* qemu < 1.1 */ | 
 |         vpci_dev->class_code = PCI_CLASS_OTHERS; | 
 |     } | 
 |  | 
 |     qdev_set_parent_bus(vdev, BUS(&vpci_dev->bus)); | 
 |     if (qdev_init(vdev) < 0) { | 
 |         return -1; | 
 |     } | 
 |     return 0; | 
 | } | 
 |  | 
 | static void virtio_balloon_pci_class_init(ObjectClass *klass, void *data) | 
 | { | 
 |     DeviceClass *dc = DEVICE_CLASS(klass); | 
 |     VirtioPCIClass *k = VIRTIO_PCI_CLASS(klass); | 
 |     PCIDeviceClass *pcidev_k = PCI_DEVICE_CLASS(klass); | 
 |     k->init = virtio_balloon_pci_init; | 
 |     set_bit(DEVICE_CATEGORY_MISC, dc->categories); | 
 |     dc->props = virtio_balloon_pci_properties; | 
 |     pcidev_k->vendor_id = PCI_VENDOR_ID_REDHAT_QUMRANET; | 
 |     pcidev_k->device_id = PCI_DEVICE_ID_VIRTIO_BALLOON; | 
 |     pcidev_k->revision = VIRTIO_PCI_ABI_VERSION; | 
 |     pcidev_k->class_id = PCI_CLASS_OTHERS; | 
 | } | 
 |  | 
 | static void virtio_balloon_pci_instance_init(Object *obj) | 
 | { | 
 |     VirtIOBalloonPCI *dev = VIRTIO_BALLOON_PCI(obj); | 
 |     object_initialize(&dev->vdev, sizeof(dev->vdev), TYPE_VIRTIO_BALLOON); | 
 |     object_property_add_child(obj, "virtio-backend", OBJECT(&dev->vdev), NULL); | 
 |     object_unref(OBJECT(&dev->vdev)); | 
 |     object_property_add(obj, "guest-stats", "guest statistics", | 
 |                         balloon_pci_stats_get_all, NULL, NULL, dev, | 
 |                         NULL); | 
 |  | 
 |     object_property_add(obj, "guest-stats-polling-interval", "int", | 
 |                         balloon_pci_stats_get_poll_interval, | 
 |                         balloon_pci_stats_set_poll_interval, | 
 |                         NULL, dev, NULL); | 
 | } | 
 |  | 
 | static const TypeInfo virtio_balloon_pci_info = { | 
 |     .name          = TYPE_VIRTIO_BALLOON_PCI, | 
 |     .parent        = TYPE_VIRTIO_PCI, | 
 |     .instance_size = sizeof(VirtIOBalloonPCI), | 
 |     .instance_init = virtio_balloon_pci_instance_init, | 
 |     .class_init    = virtio_balloon_pci_class_init, | 
 | }; | 
 |  | 
 | /* virtio-serial-pci */ | 
 |  | 
 | static int virtio_serial_pci_init(VirtIOPCIProxy *vpci_dev) | 
 | { | 
 |     VirtIOSerialPCI *dev = VIRTIO_SERIAL_PCI(vpci_dev); | 
 |     DeviceState *vdev = DEVICE(&dev->vdev); | 
 |     DeviceState *proxy = DEVICE(vpci_dev); | 
 |     char *bus_name; | 
 |  | 
 |     if (vpci_dev->class_code != PCI_CLASS_COMMUNICATION_OTHER && | 
 |         vpci_dev->class_code != PCI_CLASS_DISPLAY_OTHER && /* qemu 0.10 */ | 
 |         vpci_dev->class_code != PCI_CLASS_OTHERS) {        /* qemu-kvm  */ | 
 |             vpci_dev->class_code = PCI_CLASS_COMMUNICATION_OTHER; | 
 |     } | 
 |  | 
 |     /* backwards-compatibility with machines that were created with | 
 |        DEV_NVECTORS_UNSPECIFIED */ | 
 |     if (vpci_dev->nvectors == DEV_NVECTORS_UNSPECIFIED) { | 
 |         vpci_dev->nvectors = dev->vdev.serial.max_virtserial_ports + 1; | 
 |     } | 
 |  | 
 |     /* | 
 |      * For command line compatibility, this sets the virtio-serial-device bus | 
 |      * name as before. | 
 |      */ | 
 |     if (proxy->id) { | 
 |         bus_name = g_strdup_printf("%s.0", proxy->id); | 
 |         virtio_device_set_child_bus_name(VIRTIO_DEVICE(vdev), bus_name); | 
 |         g_free(bus_name); | 
 |     } | 
 |  | 
 |     qdev_set_parent_bus(vdev, BUS(&vpci_dev->bus)); | 
 |     if (qdev_init(vdev) < 0) { | 
 |         return -1; | 
 |     } | 
 |     return 0; | 
 | } | 
 |  | 
 | static Property virtio_serial_pci_properties[] = { | 
 |     DEFINE_PROP_BIT("ioeventfd", VirtIOPCIProxy, flags, | 
 |                     VIRTIO_PCI_FLAG_USE_IOEVENTFD_BIT, true), | 
 |     DEFINE_PROP_UINT32("vectors", VirtIOPCIProxy, nvectors, 2), | 
 |     DEFINE_PROP_UINT32("class", VirtIOPCIProxy, class_code, 0), | 
 |     DEFINE_PROP_END_OF_LIST(), | 
 | }; | 
 |  | 
 | static void virtio_serial_pci_class_init(ObjectClass *klass, void *data) | 
 | { | 
 |     DeviceClass *dc = DEVICE_CLASS(klass); | 
 |     VirtioPCIClass *k = VIRTIO_PCI_CLASS(klass); | 
 |     PCIDeviceClass *pcidev_k = PCI_DEVICE_CLASS(klass); | 
 |     k->init = virtio_serial_pci_init; | 
 |     set_bit(DEVICE_CATEGORY_INPUT, dc->categories); | 
 |     dc->props = virtio_serial_pci_properties; | 
 |     pcidev_k->vendor_id = PCI_VENDOR_ID_REDHAT_QUMRANET; | 
 |     pcidev_k->device_id = PCI_DEVICE_ID_VIRTIO_CONSOLE; | 
 |     pcidev_k->revision = VIRTIO_PCI_ABI_VERSION; | 
 |     pcidev_k->class_id = PCI_CLASS_COMMUNICATION_OTHER; | 
 | } | 
 |  | 
 | static void virtio_serial_pci_instance_init(Object *obj) | 
 | { | 
 |     VirtIOSerialPCI *dev = VIRTIO_SERIAL_PCI(obj); | 
 |  | 
 |     virtio_instance_init_common(obj, &dev->vdev, sizeof(dev->vdev), | 
 |                                 TYPE_VIRTIO_SERIAL); | 
 | } | 
 |  | 
 | static const TypeInfo virtio_serial_pci_info = { | 
 |     .name          = TYPE_VIRTIO_SERIAL_PCI, | 
 |     .parent        = TYPE_VIRTIO_PCI, | 
 |     .instance_size = sizeof(VirtIOSerialPCI), | 
 |     .instance_init = virtio_serial_pci_instance_init, | 
 |     .class_init    = virtio_serial_pci_class_init, | 
 | }; | 
 |  | 
 | /* virtio-net-pci */ | 
 |  | 
 | static Property virtio_net_properties[] = { | 
 |     DEFINE_PROP_BIT("ioeventfd", VirtIOPCIProxy, flags, | 
 |                     VIRTIO_PCI_FLAG_USE_IOEVENTFD_BIT, false), | 
 |     DEFINE_PROP_UINT32("vectors", VirtIOPCIProxy, nvectors, 3), | 
 |     DEFINE_VIRTIO_NET_FEATURES(VirtIOPCIProxy, host_features), | 
 |     DEFINE_PROP_END_OF_LIST(), | 
 | }; | 
 |  | 
 | static int virtio_net_pci_init(VirtIOPCIProxy *vpci_dev) | 
 | { | 
 |     DeviceState *qdev = DEVICE(vpci_dev); | 
 |     VirtIONetPCI *dev = VIRTIO_NET_PCI(vpci_dev); | 
 |     DeviceState *vdev = DEVICE(&dev->vdev); | 
 |  | 
 |     virtio_net_set_config_size(&dev->vdev, vpci_dev->host_features); | 
 |     virtio_net_set_netclient_name(&dev->vdev, qdev->id, | 
 |                                   object_get_typename(OBJECT(qdev))); | 
 |     qdev_set_parent_bus(vdev, BUS(&vpci_dev->bus)); | 
 |     if (qdev_init(vdev) < 0) { | 
 |         return -1; | 
 |     } | 
 |     return 0; | 
 | } | 
 |  | 
 | static void virtio_net_pci_class_init(ObjectClass *klass, void *data) | 
 | { | 
 |     DeviceClass *dc = DEVICE_CLASS(klass); | 
 |     PCIDeviceClass *k = PCI_DEVICE_CLASS(klass); | 
 |     VirtioPCIClass *vpciklass = VIRTIO_PCI_CLASS(klass); | 
 |  | 
 |     k->romfile = "efi-virtio.rom"; | 
 |     k->vendor_id = PCI_VENDOR_ID_REDHAT_QUMRANET; | 
 |     k->device_id = PCI_DEVICE_ID_VIRTIO_NET; | 
 |     k->revision = VIRTIO_PCI_ABI_VERSION; | 
 |     k->class_id = PCI_CLASS_NETWORK_ETHERNET; | 
 |     set_bit(DEVICE_CATEGORY_NETWORK, dc->categories); | 
 |     dc->props = virtio_net_properties; | 
 |     vpciklass->init = virtio_net_pci_init; | 
 | } | 
 |  | 
 | static void virtio_net_pci_instance_init(Object *obj) | 
 | { | 
 |     VirtIONetPCI *dev = VIRTIO_NET_PCI(obj); | 
 |  | 
 |     virtio_instance_init_common(obj, &dev->vdev, sizeof(dev->vdev), | 
 |                                 TYPE_VIRTIO_NET); | 
 |     object_property_add_alias(obj, "bootindex", OBJECT(&dev->vdev), | 
 |                               "bootindex", &error_abort); | 
 | } | 
 |  | 
 | static const TypeInfo virtio_net_pci_info = { | 
 |     .name          = TYPE_VIRTIO_NET_PCI, | 
 |     .parent        = TYPE_VIRTIO_PCI, | 
 |     .instance_size = sizeof(VirtIONetPCI), | 
 |     .instance_init = virtio_net_pci_instance_init, | 
 |     .class_init    = virtio_net_pci_class_init, | 
 | }; | 
 |  | 
 | /* virtio-rng-pci */ | 
 |  | 
 | static Property virtio_rng_pci_properties[] = { | 
 |     DEFINE_PROP_END_OF_LIST(), | 
 | }; | 
 |  | 
 | static int virtio_rng_pci_init(VirtIOPCIProxy *vpci_dev) | 
 | { | 
 |     VirtIORngPCI *vrng = VIRTIO_RNG_PCI(vpci_dev); | 
 |     DeviceState *vdev = DEVICE(&vrng->vdev); | 
 |  | 
 |     qdev_set_parent_bus(vdev, BUS(&vpci_dev->bus)); | 
 |     if (qdev_init(vdev) < 0) { | 
 |         return -1; | 
 |     } | 
 |  | 
 |     object_property_set_link(OBJECT(vrng), | 
 |                              OBJECT(vrng->vdev.conf.rng), "rng", | 
 |                              NULL); | 
 |  | 
 |     return 0; | 
 | } | 
 |  | 
 | static void virtio_rng_pci_class_init(ObjectClass *klass, void *data) | 
 | { | 
 |     DeviceClass *dc = DEVICE_CLASS(klass); | 
 |     VirtioPCIClass *k = VIRTIO_PCI_CLASS(klass); | 
 |     PCIDeviceClass *pcidev_k = PCI_DEVICE_CLASS(klass); | 
 |  | 
 |     k->init = virtio_rng_pci_init; | 
 |     set_bit(DEVICE_CATEGORY_MISC, dc->categories); | 
 |     dc->props = virtio_rng_pci_properties; | 
 |  | 
 |     pcidev_k->vendor_id = PCI_VENDOR_ID_REDHAT_QUMRANET; | 
 |     pcidev_k->device_id = PCI_DEVICE_ID_VIRTIO_RNG; | 
 |     pcidev_k->revision = VIRTIO_PCI_ABI_VERSION; | 
 |     pcidev_k->class_id = PCI_CLASS_OTHERS; | 
 | } | 
 |  | 
 | static void virtio_rng_initfn(Object *obj) | 
 | { | 
 |     VirtIORngPCI *dev = VIRTIO_RNG_PCI(obj); | 
 |  | 
 |     virtio_instance_init_common(obj, &dev->vdev, sizeof(dev->vdev), | 
 |                                 TYPE_VIRTIO_RNG); | 
 |     object_property_add_alias(obj, "rng", OBJECT(&dev->vdev), "rng", | 
 |                               &error_abort); | 
 | } | 
 |  | 
 | static const TypeInfo virtio_rng_pci_info = { | 
 |     .name          = TYPE_VIRTIO_RNG_PCI, | 
 |     .parent        = TYPE_VIRTIO_PCI, | 
 |     .instance_size = sizeof(VirtIORngPCI), | 
 |     .instance_init = virtio_rng_initfn, | 
 |     .class_init    = virtio_rng_pci_class_init, | 
 | }; | 
 |  | 
 | /* virtio-pci-bus */ | 
 |  | 
 | static void virtio_pci_bus_new(VirtioBusState *bus, size_t bus_size, | 
 |                                VirtIOPCIProxy *dev) | 
 | { | 
 |     DeviceState *qdev = DEVICE(dev); | 
 |     char virtio_bus_name[] = "virtio-bus"; | 
 |  | 
 |     qbus_create_inplace(bus, bus_size, TYPE_VIRTIO_PCI_BUS, qdev, | 
 |                         virtio_bus_name); | 
 | } | 
 |  | 
 | static void virtio_pci_bus_class_init(ObjectClass *klass, void *data) | 
 | { | 
 |     BusClass *bus_class = BUS_CLASS(klass); | 
 |     VirtioBusClass *k = VIRTIO_BUS_CLASS(klass); | 
 |     bus_class->max_dev = 1; | 
 |     k->notify = virtio_pci_notify; | 
 |     k->save_config = virtio_pci_save_config; | 
 |     k->load_config = virtio_pci_load_config; | 
 |     k->save_queue = virtio_pci_save_queue; | 
 |     k->load_queue = virtio_pci_load_queue; | 
 |     k->get_features = virtio_pci_get_features; | 
 |     k->query_guest_notifiers = virtio_pci_query_guest_notifiers; | 
 |     k->set_host_notifier = virtio_pci_set_host_notifier; | 
 |     k->set_guest_notifiers = virtio_pci_set_guest_notifiers; | 
 |     k->vmstate_change = virtio_pci_vmstate_change; | 
 |     k->device_plugged = virtio_pci_device_plugged; | 
 |     k->device_unplugged = virtio_pci_device_unplugged; | 
 | } | 
 |  | 
 | static const TypeInfo virtio_pci_bus_info = { | 
 |     .name          = TYPE_VIRTIO_PCI_BUS, | 
 |     .parent        = TYPE_VIRTIO_BUS, | 
 |     .instance_size = sizeof(VirtioPCIBusState), | 
 |     .class_init    = virtio_pci_bus_class_init, | 
 | }; | 
 |  | 
 | static void virtio_pci_register_types(void) | 
 | { | 
 |     type_register_static(&virtio_rng_pci_info); | 
 |     type_register_static(&virtio_pci_bus_info); | 
 |     type_register_static(&virtio_pci_info); | 
 | #ifdef CONFIG_VIRTFS | 
 |     type_register_static(&virtio_9p_pci_info); | 
 | #endif | 
 |     type_register_static(&virtio_blk_pci_info); | 
 |     type_register_static(&virtio_scsi_pci_info); | 
 |     type_register_static(&virtio_balloon_pci_info); | 
 |     type_register_static(&virtio_serial_pci_info); | 
 |     type_register_static(&virtio_net_pci_info); | 
 | #ifdef CONFIG_VHOST_SCSI | 
 |     type_register_static(&vhost_scsi_pci_info); | 
 | #endif | 
 | } | 
 |  | 
 | type_init(virtio_pci_register_types) |