| /* |
| * OSTimer device simulation in PKUnity SoC |
| * |
| * Copyright (C) 2010-2012 Guan Xuetao |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation, or any later version. |
| * See the COPYING file in the top-level directory. |
| */ |
| #include "hw/sysbus.h" |
| #include "hw/ptimer.h" |
| #include "qemu/main-loop.h" |
| |
| #undef DEBUG_PUV3 |
| #include "hw/unicore32/puv3.h" |
| |
| #define TYPE_PUV3_OST "puv3_ost" |
| #define PUV3_OST(obj) OBJECT_CHECK(PUV3OSTState, (obj), TYPE_PUV3_OST) |
| |
| /* puv3 ostimer implementation. */ |
| typedef struct PUV3OSTState { |
| SysBusDevice parent_obj; |
| |
| MemoryRegion iomem; |
| QEMUBH *bh; |
| qemu_irq irq; |
| ptimer_state *ptimer; |
| |
| uint32_t reg_OSMR0; |
| uint32_t reg_OSCR; |
| uint32_t reg_OSSR; |
| uint32_t reg_OIER; |
| } PUV3OSTState; |
| |
| static uint64_t puv3_ost_read(void *opaque, hwaddr offset, |
| unsigned size) |
| { |
| PUV3OSTState *s = opaque; |
| uint32_t ret = 0; |
| |
| switch (offset) { |
| case 0x10: /* Counter Register */ |
| ret = s->reg_OSMR0 - (uint32_t)ptimer_get_count(s->ptimer); |
| break; |
| case 0x14: /* Status Register */ |
| ret = s->reg_OSSR; |
| break; |
| case 0x1c: /* Interrupt Enable Register */ |
| ret = s->reg_OIER; |
| break; |
| default: |
| DPRINTF("Bad offset %x\n", (int)offset); |
| } |
| DPRINTF("offset 0x%x, value 0x%x\n", offset, ret); |
| return ret; |
| } |
| |
| static void puv3_ost_write(void *opaque, hwaddr offset, |
| uint64_t value, unsigned size) |
| { |
| PUV3OSTState *s = opaque; |
| |
| DPRINTF("offset 0x%x, value 0x%x\n", offset, value); |
| switch (offset) { |
| case 0x00: /* Match Register 0 */ |
| s->reg_OSMR0 = value; |
| if (s->reg_OSMR0 > s->reg_OSCR) { |
| ptimer_set_count(s->ptimer, s->reg_OSMR0 - s->reg_OSCR); |
| } else { |
| ptimer_set_count(s->ptimer, s->reg_OSMR0 + |
| (0xffffffff - s->reg_OSCR)); |
| } |
| ptimer_run(s->ptimer, 2); |
| break; |
| case 0x14: /* Status Register */ |
| assert(value == 0); |
| if (s->reg_OSSR) { |
| s->reg_OSSR = value; |
| qemu_irq_lower(s->irq); |
| } |
| break; |
| case 0x1c: /* Interrupt Enable Register */ |
| s->reg_OIER = value; |
| break; |
| default: |
| DPRINTF("Bad offset %x\n", (int)offset); |
| } |
| } |
| |
| static const MemoryRegionOps puv3_ost_ops = { |
| .read = puv3_ost_read, |
| .write = puv3_ost_write, |
| .impl = { |
| .min_access_size = 4, |
| .max_access_size = 4, |
| }, |
| .endianness = DEVICE_NATIVE_ENDIAN, |
| }; |
| |
| static void puv3_ost_tick(void *opaque) |
| { |
| PUV3OSTState *s = opaque; |
| |
| DPRINTF("ost hit when ptimer counter from 0x%x to 0x%x!\n", |
| s->reg_OSCR, s->reg_OSMR0); |
| |
| s->reg_OSCR = s->reg_OSMR0; |
| if (s->reg_OIER) { |
| s->reg_OSSR = 1; |
| qemu_irq_raise(s->irq); |
| } |
| } |
| |
| static int puv3_ost_init(SysBusDevice *dev) |
| { |
| PUV3OSTState *s = PUV3_OST(dev); |
| |
| s->reg_OIER = 0; |
| s->reg_OSSR = 0; |
| s->reg_OSMR0 = 0; |
| s->reg_OSCR = 0; |
| |
| sysbus_init_irq(dev, &s->irq); |
| |
| s->bh = qemu_bh_new(puv3_ost_tick, s); |
| s->ptimer = ptimer_init(s->bh); |
| ptimer_set_freq(s->ptimer, 50 * 1000 * 1000); |
| |
| memory_region_init_io(&s->iomem, OBJECT(s), &puv3_ost_ops, s, "puv3_ost", |
| PUV3_REGS_OFFSET); |
| sysbus_init_mmio(dev, &s->iomem); |
| |
| return 0; |
| } |
| |
| static void puv3_ost_class_init(ObjectClass *klass, void *data) |
| { |
| SysBusDeviceClass *sdc = SYS_BUS_DEVICE_CLASS(klass); |
| |
| sdc->init = puv3_ost_init; |
| } |
| |
| static const TypeInfo puv3_ost_info = { |
| .name = TYPE_PUV3_OST, |
| .parent = TYPE_SYS_BUS_DEVICE, |
| .instance_size = sizeof(PUV3OSTState), |
| .class_init = puv3_ost_class_init, |
| }; |
| |
| static void puv3_ost_register_type(void) |
| { |
| type_register_static(&puv3_ost_info); |
| } |
| |
| type_init(puv3_ost_register_type) |