| /* | 
 |  * QEMU fulong 2e mini pc support | 
 |  * | 
 |  * Copyright (c) 2008 yajin (yajin@vm-kernel.org) | 
 |  * Copyright (c) 2009 chenming (chenming@rdc.faw.com.cn) | 
 |  * Copyright (c) 2010 Huacai Chen (zltjiangshi@gmail.com) | 
 |  * This code is licensed under the GNU GPL v2. | 
 |  * | 
 |  * Contributions after 2012-01-13 are licensed under the terms of the | 
 |  * GNU GPL, version 2 or (at your option) any later version. | 
 |  */ | 
 |  | 
 | /* | 
 |  * Fulong 2e mini pc is based on ICT/ST Loongson 2e CPU (MIPS III like, 800MHz) | 
 |  * http://www.linux-mips.org/wiki/Fulong | 
 |  * | 
 |  * Loongson 2e user manual: | 
 |  * http://www.loongsondeveloper.com/doc/Loongson2EUserGuide.pdf | 
 |  */ | 
 |  | 
 | #include "hw/hw.h" | 
 | #include "hw/i386/pc.h" | 
 | #include "hw/char/serial.h" | 
 | #include "hw/block/fdc.h" | 
 | #include "net/net.h" | 
 | #include "hw/boards.h" | 
 | #include "hw/i2c/smbus.h" | 
 | #include "block/block.h" | 
 | #include "hw/block/flash.h" | 
 | #include "hw/mips/mips.h" | 
 | #include "hw/mips/cpudevs.h" | 
 | #include "hw/pci/pci.h" | 
 | #include "sysemu/char.h" | 
 | #include "sysemu/sysemu.h" | 
 | #include "audio/audio.h" | 
 | #include "qemu/log.h" | 
 | #include "hw/loader.h" | 
 | #include "hw/mips/bios.h" | 
 | #include "hw/ide.h" | 
 | #include "elf.h" | 
 | #include "hw/isa/vt82c686.h" | 
 | #include "hw/timer/mc146818rtc.h" | 
 | #include "hw/timer/i8254.h" | 
 | #include "sysemu/blockdev.h" | 
 | #include "exec/address-spaces.h" | 
 | #include "sysemu/qtest.h" | 
 | #include "qemu/error-report.h" | 
 |  | 
 | #define DEBUG_FULONG2E_INIT | 
 |  | 
 | #define ENVP_ADDR       0x80002000l | 
 | #define ENVP_NB_ENTRIES	 	16 | 
 | #define ENVP_ENTRY_SIZE	 	256 | 
 |  | 
 | #define MAX_IDE_BUS 2 | 
 |  | 
 | /* | 
 |  * PMON is not part of qemu and released with BSD license, anyone | 
 |  * who want to build a pmon binary please first git-clone the source | 
 |  * from the git repository at: | 
 |  * http://www.loongson.cn/support/git/pmon | 
 |  * Then follow the "Compile Guide" available at: | 
 |  * http://dev.lemote.com/code/pmon | 
 |  * | 
 |  * Notes: | 
 |  * 1, don't use the source at http://dev.lemote.com/http_git/pmon.git | 
 |  * 2, use "Bonito2edev" to replace "dir_corresponding_to_your_target_hardware" | 
 |  * in the "Compile Guide". | 
 |  */ | 
 | #define FULONG_BIOSNAME "pmon_fulong2e.bin" | 
 |  | 
 | /* PCI SLOT in fulong 2e */ | 
 | #define FULONG2E_VIA_SLOT        5 | 
 | #define FULONG2E_ATI_SLOT        6 | 
 | #define FULONG2E_RTL8139_SLOT    7 | 
 |  | 
 | static ISADevice *pit; | 
 |  | 
 | static struct _loaderparams { | 
 |     int ram_size; | 
 |     const char *kernel_filename; | 
 |     const char *kernel_cmdline; | 
 |     const char *initrd_filename; | 
 | } loaderparams; | 
 |  | 
 | static void GCC_FMT_ATTR(3, 4) prom_set(uint32_t* prom_buf, int index, | 
 |                                         const char *string, ...) | 
 | { | 
 |     va_list ap; | 
 |     int32_t table_addr; | 
 |  | 
 |     if (index >= ENVP_NB_ENTRIES) | 
 |         return; | 
 |  | 
 |     if (string == NULL) { | 
 |         prom_buf[index] = 0; | 
 |         return; | 
 |     } | 
 |  | 
 |     table_addr = sizeof(int32_t) * ENVP_NB_ENTRIES + index * ENVP_ENTRY_SIZE; | 
 |     prom_buf[index] = tswap32(ENVP_ADDR + table_addr); | 
 |  | 
 |     va_start(ap, string); | 
 |     vsnprintf((char *)prom_buf + table_addr, ENVP_ENTRY_SIZE, string, ap); | 
 |     va_end(ap); | 
 | } | 
 |  | 
 | static int64_t load_kernel (CPUMIPSState *env) | 
 | { | 
 |     int64_t kernel_entry, kernel_low, kernel_high; | 
 |     int index = 0; | 
 |     long initrd_size; | 
 |     ram_addr_t initrd_offset; | 
 |     uint32_t *prom_buf; | 
 |     long prom_size; | 
 |  | 
 |     if (load_elf(loaderparams.kernel_filename, cpu_mips_kseg0_to_phys, NULL, | 
 |                  (uint64_t *)&kernel_entry, (uint64_t *)&kernel_low, | 
 |                  (uint64_t *)&kernel_high, 0, ELF_MACHINE, 1) < 0) { | 
 |         fprintf(stderr, "qemu: could not load kernel '%s'\n", | 
 |                 loaderparams.kernel_filename); | 
 |         exit(1); | 
 |     } | 
 |  | 
 |     /* load initrd */ | 
 |     initrd_size = 0; | 
 |     initrd_offset = 0; | 
 |     if (loaderparams.initrd_filename) { | 
 |         initrd_size = get_image_size (loaderparams.initrd_filename); | 
 |         if (initrd_size > 0) { | 
 |             initrd_offset = (kernel_high + ~INITRD_PAGE_MASK) & INITRD_PAGE_MASK; | 
 |             if (initrd_offset + initrd_size > ram_size) { | 
 |                 fprintf(stderr, | 
 |                         "qemu: memory too small for initial ram disk '%s'\n", | 
 |                         loaderparams.initrd_filename); | 
 |                 exit(1); | 
 |             } | 
 |             initrd_size = load_image_targphys(loaderparams.initrd_filename, | 
 |                                      initrd_offset, ram_size - initrd_offset); | 
 |         } | 
 |         if (initrd_size == (target_ulong) -1) { | 
 |             fprintf(stderr, "qemu: could not load initial ram disk '%s'\n", | 
 |                     loaderparams.initrd_filename); | 
 |             exit(1); | 
 |         } | 
 |     } | 
 |  | 
 |     /* Setup prom parameters. */ | 
 |     prom_size = ENVP_NB_ENTRIES * (sizeof(int32_t) + ENVP_ENTRY_SIZE); | 
 |     prom_buf = g_malloc(prom_size); | 
 |  | 
 |     prom_set(prom_buf, index++, "%s", loaderparams.kernel_filename); | 
 |     if (initrd_size > 0) { | 
 |         prom_set(prom_buf, index++, "rd_start=0x%" PRIx64 " rd_size=%li %s", | 
 |                  cpu_mips_phys_to_kseg0(NULL, initrd_offset), initrd_size, | 
 |                  loaderparams.kernel_cmdline); | 
 |     } else { | 
 |         prom_set(prom_buf, index++, "%s", loaderparams.kernel_cmdline); | 
 |     } | 
 |  | 
 |     /* Setup minimum environment variables */ | 
 |     prom_set(prom_buf, index++, "busclock=33000000"); | 
 |     prom_set(prom_buf, index++, "cpuclock=100000000"); | 
 |     prom_set(prom_buf, index++, "memsize=%i", loaderparams.ram_size/1024/1024); | 
 |     prom_set(prom_buf, index++, "modetty0=38400n8r"); | 
 |     prom_set(prom_buf, index++, NULL); | 
 |  | 
 |     rom_add_blob_fixed("prom", prom_buf, prom_size, | 
 |                        cpu_mips_kseg0_to_phys(NULL, ENVP_ADDR)); | 
 |  | 
 |     return kernel_entry; | 
 | } | 
 |  | 
 | static void write_bootloader (CPUMIPSState *env, uint8_t *base, int64_t kernel_addr) | 
 | { | 
 |     uint32_t *p; | 
 |  | 
 |     /* Small bootloader */ | 
 |     p = (uint32_t *) base; | 
 |  | 
 |     stl_p(p++, 0x0bf00010);                                      /* j 0x1fc00040 */ | 
 |     stl_p(p++, 0x00000000);                                      /* nop */ | 
 |  | 
 |     /* Second part of the bootloader */ | 
 |     p = (uint32_t *) (base + 0x040); | 
 |  | 
 |     stl_p(p++, 0x3c040000);                                      /* lui a0, 0 */ | 
 |     stl_p(p++, 0x34840002);                                      /* ori a0, a0, 2 */ | 
 |     stl_p(p++, 0x3c050000 | ((ENVP_ADDR >> 16) & 0xffff));       /* lui a1, high(ENVP_ADDR) */ | 
 |     stl_p(p++, 0x34a50000 | (ENVP_ADDR & 0xffff));               /* ori a1, a0, low(ENVP_ADDR) */ | 
 |     stl_p(p++, 0x3c060000 | (((ENVP_ADDR + 8) >> 16) & 0xffff)); /* lui a2, high(ENVP_ADDR + 8) */ | 
 |     stl_p(p++, 0x34c60000 | ((ENVP_ADDR + 8) & 0xffff));         /* ori a2, a2, low(ENVP_ADDR + 8) */ | 
 |     stl_p(p++, 0x3c070000 | (loaderparams.ram_size >> 16));      /* lui a3, high(env->ram_size) */ | 
 |     stl_p(p++, 0x34e70000 | (loaderparams.ram_size & 0xffff));   /* ori a3, a3, low(env->ram_size) */ | 
 |     stl_p(p++, 0x3c1f0000 | ((kernel_addr >> 16) & 0xffff));     /* lui ra, high(kernel_addr) */; | 
 |     stl_p(p++, 0x37ff0000 | (kernel_addr & 0xffff));             /* ori ra, ra, low(kernel_addr) */ | 
 |     stl_p(p++, 0x03e00008);                                      /* jr ra */ | 
 |     stl_p(p++, 0x00000000);                                      /* nop */ | 
 | } | 
 |  | 
 |  | 
 | static void main_cpu_reset(void *opaque) | 
 | { | 
 |     MIPSCPU *cpu = opaque; | 
 |     CPUMIPSState *env = &cpu->env; | 
 |  | 
 |     cpu_reset(CPU(cpu)); | 
 |     /* TODO: 2E reset stuff */ | 
 |     if (loaderparams.kernel_filename) { | 
 |         env->CP0_Status &= ~((1 << CP0St_BEV) | (1 << CP0St_ERL)); | 
 |     } | 
 | } | 
 |  | 
 | static const uint8_t eeprom_spd[0x80] = { | 
 |     0x80,0x08,0x07,0x0d,0x09,0x02,0x40,0x00,0x04,0x70, | 
 |     0x70,0x00,0x82,0x10,0x00,0x01,0x0e,0x04,0x0c,0x01, | 
 |     0x02,0x20,0x80,0x75,0x70,0x00,0x00,0x50,0x3c,0x50, | 
 |     0x2d,0x20,0xb0,0xb0,0x50,0x50,0x00,0x00,0x00,0x00, | 
 |     0x00,0x41,0x48,0x3c,0x32,0x75,0x00,0x00,0x00,0x00, | 
 |     0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, | 
 |     0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, | 
 |     0x00,0x00,0x00,0x9c,0x7b,0x07,0x00,0x00,0x00,0x00, | 
 |     0x00,0x00,0x00,0x00,0x48,0x42,0x35,0x34,0x41,0x32, | 
 |     0x35,0x36,0x38,0x4b,0x4e,0x2d,0x41,0x37,0x35,0x42, | 
 |     0x20,0x30,0x20 | 
 | }; | 
 |  | 
 | /* Audio support */ | 
 | static void audio_init (PCIBus *pci_bus) | 
 | { | 
 |     vt82c686b_ac97_init(pci_bus, PCI_DEVFN(FULONG2E_VIA_SLOT, 5)); | 
 |     vt82c686b_mc97_init(pci_bus, PCI_DEVFN(FULONG2E_VIA_SLOT, 6)); | 
 | } | 
 |  | 
 | /* Network support */ | 
 | static void network_init (PCIBus *pci_bus) | 
 | { | 
 |     int i; | 
 |  | 
 |     for(i = 0; i < nb_nics; i++) { | 
 |         NICInfo *nd = &nd_table[i]; | 
 |         const char *default_devaddr = NULL; | 
 |  | 
 |         if (i == 0 && (!nd->model || strcmp(nd->model, "rtl8139") == 0)) { | 
 |             /* The fulong board has a RTL8139 card using PCI SLOT 7 */ | 
 |             default_devaddr = "07"; | 
 |         } | 
 |  | 
 |         pci_nic_init_nofail(nd, pci_bus, "rtl8139", default_devaddr); | 
 |     } | 
 | } | 
 |  | 
 | static void cpu_request_exit(void *opaque, int irq, int level) | 
 | { | 
 |     CPUState *cpu = current_cpu; | 
 |  | 
 |     if (cpu && level) { | 
 |         cpu_exit(cpu); | 
 |     } | 
 | } | 
 |  | 
 | static void mips_fulong2e_init(MachineState *machine) | 
 | { | 
 |     ram_addr_t ram_size = machine->ram_size; | 
 |     const char *cpu_model = machine->cpu_model; | 
 |     const char *kernel_filename = machine->kernel_filename; | 
 |     const char *kernel_cmdline = machine->kernel_cmdline; | 
 |     const char *initrd_filename = machine->initrd_filename; | 
 |     char *filename; | 
 |     MemoryRegion *address_space_mem = get_system_memory(); | 
 |     MemoryRegion *ram = g_new(MemoryRegion, 1); | 
 |     MemoryRegion *bios = g_new(MemoryRegion, 1); | 
 |     long bios_size; | 
 |     int64_t kernel_entry; | 
 |     qemu_irq *i8259; | 
 |     qemu_irq *cpu_exit_irq; | 
 |     PCIBus *pci_bus; | 
 |     ISABus *isa_bus; | 
 |     I2CBus *smbus; | 
 |     int i; | 
 |     DriveInfo *hd[MAX_IDE_BUS * MAX_IDE_DEVS]; | 
 |     MIPSCPU *cpu; | 
 |     CPUMIPSState *env; | 
 |  | 
 |     /* init CPUs */ | 
 |     if (cpu_model == NULL) { | 
 |         cpu_model = "Loongson-2E"; | 
 |     } | 
 |     cpu = cpu_mips_init(cpu_model); | 
 |     if (cpu == NULL) { | 
 |         fprintf(stderr, "Unable to find CPU definition\n"); | 
 |         exit(1); | 
 |     } | 
 |     env = &cpu->env; | 
 |  | 
 |     qemu_register_reset(main_cpu_reset, cpu); | 
 |  | 
 |     /* fulong 2e has 256M ram. */ | 
 |     ram_size = 256 * 1024 * 1024; | 
 |  | 
 |     /* fulong 2e has a 1M flash.Winbond W39L040AP70Z */ | 
 |     bios_size = 1024 * 1024; | 
 |  | 
 |     /* allocate RAM */ | 
 |     memory_region_init_ram(ram, NULL, "fulong2e.ram", ram_size); | 
 |     vmstate_register_ram_global(ram); | 
 |     memory_region_init_ram(bios, NULL, "fulong2e.bios", bios_size); | 
 |     vmstate_register_ram_global(bios); | 
 |     memory_region_set_readonly(bios, true); | 
 |  | 
 |     memory_region_add_subregion(address_space_mem, 0, ram); | 
 |     memory_region_add_subregion(address_space_mem, 0x1fc00000LL, bios); | 
 |  | 
 |     /* We do not support flash operation, just loading pmon.bin as raw BIOS. | 
 |      * Please use -L to set the BIOS path and -bios to set bios name. */ | 
 |  | 
 |     if (kernel_filename) { | 
 |         loaderparams.ram_size = ram_size; | 
 |         loaderparams.kernel_filename = kernel_filename; | 
 |         loaderparams.kernel_cmdline = kernel_cmdline; | 
 |         loaderparams.initrd_filename = initrd_filename; | 
 |         kernel_entry = load_kernel (env); | 
 |         write_bootloader(env, memory_region_get_ram_ptr(bios), kernel_entry); | 
 |     } else { | 
 |         if (bios_name == NULL) { | 
 |                 bios_name = FULONG_BIOSNAME; | 
 |         } | 
 |         filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, bios_name); | 
 |         if (filename) { | 
 |             bios_size = load_image_targphys(filename, 0x1fc00000LL, | 
 |                                             BIOS_SIZE); | 
 |             g_free(filename); | 
 |         } else { | 
 |             bios_size = -1; | 
 |         } | 
 |  | 
 |         if ((bios_size < 0 || bios_size > BIOS_SIZE) && | 
 |             !kernel_filename && !qtest_enabled()) { | 
 |             error_report("Could not load MIPS bios '%s'", bios_name); | 
 |             exit(1); | 
 |         } | 
 |     } | 
 |  | 
 |     /* Init internal devices */ | 
 |     cpu_mips_irq_init_cpu(env); | 
 |     cpu_mips_clock_init(env); | 
 |  | 
 |     /* North bridge, Bonito --> IP2 */ | 
 |     pci_bus = bonito_init((qemu_irq *)&(env->irq[2])); | 
 |  | 
 |     /* South bridge */ | 
 |     ide_drive_get(hd, MAX_IDE_BUS); | 
 |  | 
 |     isa_bus = vt82c686b_init(pci_bus, PCI_DEVFN(FULONG2E_VIA_SLOT, 0)); | 
 |     if (!isa_bus) { | 
 |         fprintf(stderr, "vt82c686b_init error\n"); | 
 |         exit(1); | 
 |     } | 
 |  | 
 |     /* Interrupt controller */ | 
 |     /* The 8259 -> IP5  */ | 
 |     i8259 = i8259_init(isa_bus, env->irq[5]); | 
 |     isa_bus_irqs(isa_bus, i8259); | 
 |  | 
 |     vt82c686b_ide_init(pci_bus, hd, PCI_DEVFN(FULONG2E_VIA_SLOT, 1)); | 
 |     pci_create_simple(pci_bus, PCI_DEVFN(FULONG2E_VIA_SLOT, 2), | 
 |                       "vt82c686b-usb-uhci"); | 
 |     pci_create_simple(pci_bus, PCI_DEVFN(FULONG2E_VIA_SLOT, 3), | 
 |                       "vt82c686b-usb-uhci"); | 
 |  | 
 |     smbus = vt82c686b_pm_init(pci_bus, PCI_DEVFN(FULONG2E_VIA_SLOT, 4), | 
 |                               0xeee1, NULL); | 
 |     /* TODO: Populate SPD eeprom data.  */ | 
 |     smbus_eeprom_init(smbus, 1, eeprom_spd, sizeof(eeprom_spd)); | 
 |  | 
 |     /* init other devices */ | 
 |     pit = pit_init(isa_bus, 0x40, 0, NULL); | 
 |     cpu_exit_irq = qemu_allocate_irqs(cpu_request_exit, NULL, 1); | 
 |     DMA_init(0, cpu_exit_irq); | 
 |  | 
 |     /* Super I/O */ | 
 |     isa_create_simple(isa_bus, "i8042"); | 
 |  | 
 |     rtc_init(isa_bus, 2000, NULL); | 
 |  | 
 |     for(i = 0; i < MAX_SERIAL_PORTS; i++) { | 
 |         if (serial_hds[i]) { | 
 |             serial_isa_init(isa_bus, i, serial_hds[i]); | 
 |         } | 
 |     } | 
 |  | 
 |     if (parallel_hds[0]) { | 
 |         parallel_init(isa_bus, 0, parallel_hds[0]); | 
 |     } | 
 |  | 
 |     /* Sound card */ | 
 |     audio_init(pci_bus); | 
 |     /* Network card */ | 
 |     network_init(pci_bus); | 
 | } | 
 |  | 
 | static QEMUMachine mips_fulong2e_machine = { | 
 |     .name = "fulong2e", | 
 |     .desc = "Fulong 2e mini pc", | 
 |     .init = mips_fulong2e_init, | 
 | }; | 
 |  | 
 | static void mips_fulong2e_machine_init(void) | 
 | { | 
 |     qemu_register_machine(&mips_fulong2e_machine); | 
 | } | 
 |  | 
 | machine_init(mips_fulong2e_machine_init); |