| # -*- Mode: Python -*- |
| # |
| # QAPI Schema |
| |
| ## |
| # @ErrorClass |
| # |
| # QEMU error classes |
| # |
| # @GenericError: this is used for errors that don't require a specific error |
| # class. This should be the default case for most errors |
| # |
| # @CommandNotFound: the requested command has not been found |
| # |
| # @DeviceEncrypted: the requested operation can't be fulfilled because the |
| # selected device is encrypted |
| # |
| # @DeviceNotActive: a device has failed to be become active |
| # |
| # @DeviceNotFound: the requested device has not been found |
| # |
| # @KVMMissingCap: the requested operation can't be fulfilled because a |
| # required KVM capability is missing |
| # |
| # Since: 1.2 |
| ## |
| { 'enum': 'ErrorClass', |
| 'data': [ 'GenericError', 'CommandNotFound', 'DeviceEncrypted', |
| 'DeviceNotActive', 'DeviceNotFound', 'KVMMissingCap' ] } |
| |
| |
| ## |
| # LostTickPolicy: |
| # |
| # Policy for handling lost ticks in timer devices. |
| # |
| # @discard: throw away the missed tick(s) and continue with future injection |
| # normally. Guest time may be delayed, unless the OS has explicit |
| # handling of lost ticks |
| # |
| # @delay: continue to deliver ticks at the normal rate. Guest time will be |
| # delayed due to the late tick |
| # |
| # @merge: merge the missed tick(s) into one tick and inject. Guest time |
| # may be delayed, depending on how the OS reacts to the merging |
| # of ticks |
| # |
| # @slew: deliver ticks at a higher rate to catch up with the missed tick. The |
| # guest time should not be delayed once catchup is complete. |
| # |
| # Since: 2.0 |
| ## |
| { 'enum': 'LostTickPolicy', |
| 'data': ['discard', 'delay', 'merge', 'slew' ] } |
| |
| ## |
| # BiosAtaTranslation: |
| # |
| # Policy that BIOS should use to interpret cylinder/head/sector |
| # addresses. Note that Bochs BIOS and SeaBIOS will not actually |
| # translate logical CHS to physical; instead, they will use logical |
| # block addressing. |
| # |
| # @auto: If cylinder/heads/sizes are passed, choose between none and LBA |
| # depending on the size of the disk. If they are not passed, |
| # choose none if QEMU can guess that the disk had 16 or fewer |
| # heads, large if QEMU can guess that the disk had 131072 or |
| # fewer tracks across all heads (i.e. cylinders*heads<131072), |
| # otherwise LBA. |
| # |
| # @none: The physical disk geometry is equal to the logical geometry. |
| # |
| # @lba: Assume 63 sectors per track and one of 16, 32, 64, 128 or 255 |
| # heads (if fewer than 255 are enough to cover the whole disk |
| # with 1024 cylinders/head). The number of cylinders/head is |
| # then computed based on the number of sectors and heads. |
| # |
| # @large: The number of cylinders per head is scaled down to 1024 |
| # by correspondingly scaling up the number of heads. |
| # |
| # @rechs: Same as @large, but first convert a 16-head geometry to |
| # 15-head, by proportionally scaling up the number of |
| # cylinders/head. |
| # |
| # Since: 2.0 |
| ## |
| { 'enum': 'BiosAtaTranslation', |
| 'data': ['auto', 'none', 'lba', 'large', 'rechs']} |
| |
| # @add_client |
| # |
| # Allow client connections for VNC, Spice and socket based |
| # character devices to be passed in to QEMU via SCM_RIGHTS. |
| # |
| # @protocol: protocol name. Valid names are "vnc", "spice" or the |
| # name of a character device (eg. from -chardev id=XXXX) |
| # |
| # @fdname: file descriptor name previously passed via 'getfd' command |
| # |
| # @skipauth: #optional whether to skip authentication. Only applies |
| # to "vnc" and "spice" protocols |
| # |
| # @tls: #optional whether to perform TLS. Only applies to the "spice" |
| # protocol |
| # |
| # Returns: nothing on success. |
| # |
| # Since: 0.14.0 |
| ## |
| { 'command': 'add_client', |
| 'data': { 'protocol': 'str', 'fdname': 'str', '*skipauth': 'bool', |
| '*tls': 'bool' } } |
| |
| ## |
| # @NameInfo: |
| # |
| # Guest name information. |
| # |
| # @name: #optional The name of the guest |
| # |
| # Since 0.14.0 |
| ## |
| { 'type': 'NameInfo', 'data': {'*name': 'str'} } |
| |
| ## |
| # @query-name: |
| # |
| # Return the name information of a guest. |
| # |
| # Returns: @NameInfo of the guest |
| # |
| # Since 0.14.0 |
| ## |
| { 'command': 'query-name', 'returns': 'NameInfo' } |
| |
| ## |
| # @VersionInfo: |
| # |
| # A description of QEMU's version. |
| # |
| # @qemu.major: The major version of QEMU |
| # |
| # @qemu.minor: The minor version of QEMU |
| # |
| # @qemu.micro: The micro version of QEMU. By current convention, a micro |
| # version of 50 signifies a development branch. A micro version |
| # greater than or equal to 90 signifies a release candidate for |
| # the next minor version. A micro version of less than 50 |
| # signifies a stable release. |
| # |
| # @package: QEMU will always set this field to an empty string. Downstream |
| # versions of QEMU should set this to a non-empty string. The |
| # exact format depends on the downstream however it highly |
| # recommended that a unique name is used. |
| # |
| # Since: 0.14.0 |
| ## |
| { 'type': 'VersionInfo', |
| 'data': {'qemu': {'major': 'int', 'minor': 'int', 'micro': 'int'}, |
| 'package': 'str'} } |
| |
| ## |
| # @query-version: |
| # |
| # Returns the current version of QEMU. |
| # |
| # Returns: A @VersionInfo object describing the current version of QEMU. |
| # |
| # Since: 0.14.0 |
| ## |
| { 'command': 'query-version', 'returns': 'VersionInfo' } |
| |
| ## |
| # @KvmInfo: |
| # |
| # Information about support for KVM acceleration |
| # |
| # @enabled: true if KVM acceleration is active |
| # |
| # @present: true if KVM acceleration is built into this executable |
| # |
| # Since: 0.14.0 |
| ## |
| { 'type': 'KvmInfo', 'data': {'enabled': 'bool', 'present': 'bool'} } |
| |
| ## |
| # @query-kvm: |
| # |
| # Returns information about KVM acceleration |
| # |
| # Returns: @KvmInfo |
| # |
| # Since: 0.14.0 |
| ## |
| { 'command': 'query-kvm', 'returns': 'KvmInfo' } |
| |
| ## |
| # @RunState |
| # |
| # An enumeration of VM run states. |
| # |
| # @debug: QEMU is running on a debugger |
| # |
| # @finish-migrate: guest is paused to finish the migration process |
| # |
| # @inmigrate: guest is paused waiting for an incoming migration. Note |
| # that this state does not tell whether the machine will start at the |
| # end of the migration. This depends on the command-line -S option and |
| # any invocation of 'stop' or 'cont' that has happened since QEMU was |
| # started. |
| # |
| # @internal-error: An internal error that prevents further guest execution |
| # has occurred |
| # |
| # @io-error: the last IOP has failed and the device is configured to pause |
| # on I/O errors |
| # |
| # @paused: guest has been paused via the 'stop' command |
| # |
| # @postmigrate: guest is paused following a successful 'migrate' |
| # |
| # @prelaunch: QEMU was started with -S and guest has not started |
| # |
| # @restore-vm: guest is paused to restore VM state |
| # |
| # @running: guest is actively running |
| # |
| # @save-vm: guest is paused to save the VM state |
| # |
| # @shutdown: guest is shut down (and -no-shutdown is in use) |
| # |
| # @suspended: guest is suspended (ACPI S3) |
| # |
| # @watchdog: the watchdog action is configured to pause and has been triggered |
| # |
| # @guest-panicked: guest has been panicked as a result of guest OS panic |
| ## |
| { 'enum': 'RunState', |
| 'data': [ 'debug', 'inmigrate', 'internal-error', 'io-error', 'paused', |
| 'postmigrate', 'prelaunch', 'finish-migrate', 'restore-vm', |
| 'running', 'save-vm', 'shutdown', 'suspended', 'watchdog', |
| 'guest-panicked' ] } |
| |
| ## |
| # @SnapshotInfo |
| # |
| # @id: unique snapshot id |
| # |
| # @name: user chosen name |
| # |
| # @vm-state-size: size of the VM state |
| # |
| # @date-sec: UTC date of the snapshot in seconds |
| # |
| # @date-nsec: fractional part in nano seconds to be used with date-sec |
| # |
| # @vm-clock-sec: VM clock relative to boot in seconds |
| # |
| # @vm-clock-nsec: fractional part in nano seconds to be used with vm-clock-sec |
| # |
| # Since: 1.3 |
| # |
| ## |
| |
| { 'type': 'SnapshotInfo', |
| 'data': { 'id': 'str', 'name': 'str', 'vm-state-size': 'int', |
| 'date-sec': 'int', 'date-nsec': 'int', |
| 'vm-clock-sec': 'int', 'vm-clock-nsec': 'int' } } |
| |
| ## |
| # @ImageInfoSpecificQCow2: |
| # |
| # @compat: compatibility level |
| # |
| # @lazy-refcounts: #optional on or off; only valid for compat >= 1.1 |
| # |
| # Since: 1.7 |
| ## |
| { 'type': 'ImageInfoSpecificQCow2', |
| 'data': { |
| 'compat': 'str', |
| '*lazy-refcounts': 'bool' |
| } } |
| |
| ## |
| # @ImageInfoSpecificVmdk: |
| # |
| # @create-type: The create type of VMDK image |
| # |
| # @cid: Content id of image |
| # |
| # @parent-cid: Parent VMDK image's cid |
| # |
| # @extents: List of extent files |
| # |
| # Since: 1.7 |
| ## |
| { 'type': 'ImageInfoSpecificVmdk', |
| 'data': { |
| 'create-type': 'str', |
| 'cid': 'int', |
| 'parent-cid': 'int', |
| 'extents': ['ImageInfo'] |
| } } |
| |
| ## |
| # @ImageInfoSpecific: |
| # |
| # A discriminated record of image format specific information structures. |
| # |
| # Since: 1.7 |
| ## |
| |
| { 'union': 'ImageInfoSpecific', |
| 'data': { |
| 'qcow2': 'ImageInfoSpecificQCow2', |
| 'vmdk': 'ImageInfoSpecificVmdk' |
| } } |
| |
| ## |
| # @ImageInfo: |
| # |
| # Information about a QEMU image file |
| # |
| # @filename: name of the image file |
| # |
| # @format: format of the image file |
| # |
| # @virtual-size: maximum capacity in bytes of the image |
| # |
| # @actual-size: #optional actual size on disk in bytes of the image |
| # |
| # @dirty-flag: #optional true if image is not cleanly closed |
| # |
| # @cluster-size: #optional size of a cluster in bytes |
| # |
| # @encrypted: #optional true if the image is encrypted |
| # |
| # @compressed: #optional true if the image is compressed (Since 1.7) |
| # |
| # @backing-filename: #optional name of the backing file |
| # |
| # @full-backing-filename: #optional full path of the backing file |
| # |
| # @backing-filename-format: #optional the format of the backing file |
| # |
| # @snapshots: #optional list of VM snapshots |
| # |
| # @backing-image: #optional info of the backing image (since 1.6) |
| # |
| # @format-specific: #optional structure supplying additional format-specific |
| # information (since 1.7) |
| # |
| # Since: 1.3 |
| # |
| ## |
| |
| { 'type': 'ImageInfo', |
| 'data': {'filename': 'str', 'format': 'str', '*dirty-flag': 'bool', |
| '*actual-size': 'int', 'virtual-size': 'int', |
| '*cluster-size': 'int', '*encrypted': 'bool', '*compressed': 'bool', |
| '*backing-filename': 'str', '*full-backing-filename': 'str', |
| '*backing-filename-format': 'str', '*snapshots': ['SnapshotInfo'], |
| '*backing-image': 'ImageInfo', |
| '*format-specific': 'ImageInfoSpecific' } } |
| |
| ## |
| # @ImageCheck: |
| # |
| # Information about a QEMU image file check |
| # |
| # @filename: name of the image file checked |
| # |
| # @format: format of the image file checked |
| # |
| # @check-errors: number of unexpected errors occurred during check |
| # |
| # @image-end-offset: #optional offset (in bytes) where the image ends, this |
| # field is present if the driver for the image format |
| # supports it |
| # |
| # @corruptions: #optional number of corruptions found during the check if any |
| # |
| # @leaks: #optional number of leaks found during the check if any |
| # |
| # @corruptions-fixed: #optional number of corruptions fixed during the check |
| # if any |
| # |
| # @leaks-fixed: #optional number of leaks fixed during the check if any |
| # |
| # @total-clusters: #optional total number of clusters, this field is present |
| # if the driver for the image format supports it |
| # |
| # @allocated-clusters: #optional total number of allocated clusters, this |
| # field is present if the driver for the image format |
| # supports it |
| # |
| # @fragmented-clusters: #optional total number of fragmented clusters, this |
| # field is present if the driver for the image format |
| # supports it |
| # |
| # @compressed-clusters: #optional total number of compressed clusters, this |
| # field is present if the driver for the image format |
| # supports it |
| # |
| # Since: 1.4 |
| # |
| ## |
| |
| { 'type': 'ImageCheck', |
| 'data': {'filename': 'str', 'format': 'str', 'check-errors': 'int', |
| '*image-end-offset': 'int', '*corruptions': 'int', '*leaks': 'int', |
| '*corruptions-fixed': 'int', '*leaks-fixed': 'int', |
| '*total-clusters': 'int', '*allocated-clusters': 'int', |
| '*fragmented-clusters': 'int', '*compressed-clusters': 'int' } } |
| |
| ## |
| # @StatusInfo: |
| # |
| # Information about VCPU run state |
| # |
| # @running: true if all VCPUs are runnable, false if not runnable |
| # |
| # @singlestep: true if VCPUs are in single-step mode |
| # |
| # @status: the virtual machine @RunState |
| # |
| # Since: 0.14.0 |
| # |
| # Notes: @singlestep is enabled through the GDB stub |
| ## |
| { 'type': 'StatusInfo', |
| 'data': {'running': 'bool', 'singlestep': 'bool', 'status': 'RunState'} } |
| |
| ## |
| # @query-status: |
| # |
| # Query the run status of all VCPUs |
| # |
| # Returns: @StatusInfo reflecting all VCPUs |
| # |
| # Since: 0.14.0 |
| ## |
| { 'command': 'query-status', 'returns': 'StatusInfo' } |
| |
| ## |
| # @UuidInfo: |
| # |
| # Guest UUID information. |
| # |
| # @UUID: the UUID of the guest |
| # |
| # Since: 0.14.0 |
| # |
| # Notes: If no UUID was specified for the guest, a null UUID is returned. |
| ## |
| { 'type': 'UuidInfo', 'data': {'UUID': 'str'} } |
| |
| ## |
| # @query-uuid: |
| # |
| # Query the guest UUID information. |
| # |
| # Returns: The @UuidInfo for the guest |
| # |
| # Since 0.14.0 |
| ## |
| { 'command': 'query-uuid', 'returns': 'UuidInfo' } |
| |
| ## |
| # @ChardevInfo: |
| # |
| # Information about a character device. |
| # |
| # @label: the label of the character device |
| # |
| # @filename: the filename of the character device |
| # |
| # Notes: @filename is encoded using the QEMU command line character device |
| # encoding. See the QEMU man page for details. |
| # |
| # Since: 0.14.0 |
| ## |
| { 'type': 'ChardevInfo', 'data': {'label': 'str', 'filename': 'str'} } |
| |
| ## |
| # @query-chardev: |
| # |
| # Returns information about current character devices. |
| # |
| # Returns: a list of @ChardevInfo |
| # |
| # Since: 0.14.0 |
| ## |
| { 'command': 'query-chardev', 'returns': ['ChardevInfo'] } |
| |
| ## |
| # @ChardevBackendInfo: |
| # |
| # Information about a character device backend |
| # |
| # @name: The backend name |
| # |
| # Since: 2.0 |
| ## |
| { 'type': 'ChardevBackendInfo', 'data': {'name': 'str'} } |
| |
| ## |
| # @query-chardev-backends: |
| # |
| # Returns information about character device backends. |
| # |
| # Returns: a list of @ChardevBackendInfo |
| # |
| # Since: 2.0 |
| ## |
| { 'command': 'query-chardev-backends', 'returns': ['ChardevBackendInfo'] } |
| |
| ## |
| # @DataFormat: |
| # |
| # An enumeration of data format. |
| # |
| # @utf8: Data is a UTF-8 string (RFC 3629) |
| # |
| # @base64: Data is Base64 encoded binary (RFC 3548) |
| # |
| # Since: 1.4 |
| ## |
| { 'enum': 'DataFormat', |
| 'data': [ 'utf8', 'base64' ] } |
| |
| ## |
| # @ringbuf-write: |
| # |
| # Write to a ring buffer character device. |
| # |
| # @device: the ring buffer character device name |
| # |
| # @data: data to write |
| # |
| # @format: #optional data encoding (default 'utf8'). |
| # - base64: data must be base64 encoded text. Its binary |
| # decoding gets written. |
| # Bug: invalid base64 is currently not rejected. |
| # Whitespace *is* invalid. |
| # - utf8: data's UTF-8 encoding is written |
| # - data itself is always Unicode regardless of format, like |
| # any other string. |
| # |
| # Returns: Nothing on success |
| # |
| # Since: 1.4 |
| ## |
| { 'command': 'ringbuf-write', |
| 'data': {'device': 'str', 'data': 'str', |
| '*format': 'DataFormat'} } |
| |
| ## |
| # @ringbuf-read: |
| # |
| # Read from a ring buffer character device. |
| # |
| # @device: the ring buffer character device name |
| # |
| # @size: how many bytes to read at most |
| # |
| # @format: #optional data encoding (default 'utf8'). |
| # - base64: the data read is returned in base64 encoding. |
| # - utf8: the data read is interpreted as UTF-8. |
| # Bug: can screw up when the buffer contains invalid UTF-8 |
| # sequences, NUL characters, after the ring buffer lost |
| # data, and when reading stops because the size limit is |
| # reached. |
| # - The return value is always Unicode regardless of format, |
| # like any other string. |
| # |
| # Returns: data read from the device |
| # |
| # Since: 1.4 |
| ## |
| { 'command': 'ringbuf-read', |
| 'data': {'device': 'str', 'size': 'int', '*format': 'DataFormat'}, |
| 'returns': 'str' } |
| |
| ## |
| # @CommandInfo: |
| # |
| # Information about a QMP command |
| # |
| # @name: The command name |
| # |
| # Since: 0.14.0 |
| ## |
| { 'type': 'CommandInfo', 'data': {'name': 'str'} } |
| |
| ## |
| # @query-commands: |
| # |
| # Return a list of supported QMP commands by this server |
| # |
| # Returns: A list of @CommandInfo for all supported commands |
| # |
| # Since: 0.14.0 |
| ## |
| { 'command': 'query-commands', 'returns': ['CommandInfo'] } |
| |
| ## |
| # @EventInfo: |
| # |
| # Information about a QMP event |
| # |
| # @name: The event name |
| # |
| # Since: 1.2.0 |
| ## |
| { 'type': 'EventInfo', 'data': {'name': 'str'} } |
| |
| ## |
| # @query-events: |
| # |
| # Return a list of supported QMP events by this server |
| # |
| # Returns: A list of @EventInfo for all supported events |
| # |
| # Since: 1.2.0 |
| ## |
| { 'command': 'query-events', 'returns': ['EventInfo'] } |
| |
| ## |
| # @MigrationStats |
| # |
| # Detailed migration status. |
| # |
| # @transferred: amount of bytes already transferred to the target VM |
| # |
| # @remaining: amount of bytes remaining to be transferred to the target VM |
| # |
| # @total: total amount of bytes involved in the migration process |
| # |
| # @duplicate: number of duplicate (zero) pages (since 1.2) |
| # |
| # @skipped: number of skipped zero pages (since 1.5) |
| # |
| # @normal : number of normal pages (since 1.2) |
| # |
| # @normal-bytes: number of normal bytes sent (since 1.2) |
| # |
| # @dirty-pages-rate: number of pages dirtied by second by the |
| # guest (since 1.3) |
| # |
| # @mbps: throughput in megabits/sec. (since 1.6) |
| # |
| # @dirty-sync-count: number of times that dirty ram was synchronized (since 2.1) |
| # |
| # Since: 0.14.0 |
| ## |
| { 'type': 'MigrationStats', |
| 'data': {'transferred': 'int', 'remaining': 'int', 'total': 'int' , |
| 'duplicate': 'int', 'skipped': 'int', 'normal': 'int', |
| 'normal-bytes': 'int', 'dirty-pages-rate' : 'int', |
| 'mbps' : 'number', 'dirty-sync-count' : 'int' } } |
| |
| ## |
| # @XBZRLECacheStats |
| # |
| # Detailed XBZRLE migration cache statistics |
| # |
| # @cache-size: XBZRLE cache size |
| # |
| # @bytes: amount of bytes already transferred to the target VM |
| # |
| # @pages: amount of pages transferred to the target VM |
| # |
| # @cache-miss: number of cache miss |
| # |
| # @cache-miss-rate: rate of cache miss (since 2.1) |
| # |
| # @overflow: number of overflows |
| # |
| # Since: 1.2 |
| ## |
| { 'type': 'XBZRLECacheStats', |
| 'data': {'cache-size': 'int', 'bytes': 'int', 'pages': 'int', |
| 'cache-miss': 'int', 'cache-miss-rate': 'number', |
| 'overflow': 'int' } } |
| |
| ## |
| # @MigrationInfo |
| # |
| # Information about current migration process. |
| # |
| # @status: #optional string describing the current migration status. |
| # As of 0.14.0 this can be 'setup', 'active', 'completed', 'failed' or |
| # 'cancelled'. If this field is not returned, no migration process |
| # has been initiated |
| # |
| # @ram: #optional @MigrationStats containing detailed migration |
| # status, only returned if status is 'active' or |
| # 'completed'. 'comppleted' (since 1.2) |
| # |
| # @disk: #optional @MigrationStats containing detailed disk migration |
| # status, only returned if status is 'active' and it is a block |
| # migration |
| # |
| # @xbzrle-cache: #optional @XBZRLECacheStats containing detailed XBZRLE |
| # migration statistics, only returned if XBZRLE feature is on and |
| # status is 'active' or 'completed' (since 1.2) |
| # |
| # @total-time: #optional total amount of milliseconds since migration started. |
| # If migration has ended, it returns the total migration |
| # time. (since 1.2) |
| # |
| # @downtime: #optional only present when migration finishes correctly |
| # total downtime in milliseconds for the guest. |
| # (since 1.3) |
| # |
| # @expected-downtime: #optional only present while migration is active |
| # expected downtime in milliseconds for the guest in last walk |
| # of the dirty bitmap. (since 1.3) |
| # |
| # @setup-time: #optional amount of setup time in milliseconds _before_ the |
| # iterations begin but _after_ the QMP command is issued. This is designed |
| # to provide an accounting of any activities (such as RDMA pinning) which |
| # may be expensive, but do not actually occur during the iterative |
| # migration rounds themselves. (since 1.6) |
| # |
| # Since: 0.14.0 |
| ## |
| { 'type': 'MigrationInfo', |
| 'data': {'*status': 'str', '*ram': 'MigrationStats', |
| '*disk': 'MigrationStats', |
| '*xbzrle-cache': 'XBZRLECacheStats', |
| '*total-time': 'int', |
| '*expected-downtime': 'int', |
| '*downtime': 'int', |
| '*setup-time': 'int'} } |
| |
| ## |
| # @query-migrate |
| # |
| # Returns information about current migration process. |
| # |
| # Returns: @MigrationInfo |
| # |
| # Since: 0.14.0 |
| ## |
| { 'command': 'query-migrate', 'returns': 'MigrationInfo' } |
| |
| ## |
| # @MigrationCapability |
| # |
| # Migration capabilities enumeration |
| # |
| # @xbzrle: Migration supports xbzrle (Xor Based Zero Run Length Encoding). |
| # This feature allows us to minimize migration traffic for certain work |
| # loads, by sending compressed difference of the pages |
| # |
| # @rdma-pin-all: Controls whether or not the entire VM memory footprint is |
| # mlock()'d on demand or all at once. Refer to docs/rdma.txt for usage. |
| # Disabled by default. (since 2.0) |
| # |
| # @zero-blocks: During storage migration encode blocks of zeroes efficiently. This |
| # essentially saves 1MB of zeroes per block on the wire. Enabling requires |
| # source and target VM to support this feature. To enable it is sufficient |
| # to enable the capability on the source VM. The feature is disabled by |
| # default. (since 1.6) |
| # |
| # @auto-converge: If enabled, QEMU will automatically throttle down the guest |
| # to speed up convergence of RAM migration. (since 1.6) |
| # |
| # Since: 1.2 |
| ## |
| { 'enum': 'MigrationCapability', |
| 'data': ['xbzrle', 'rdma-pin-all', 'auto-converge', 'zero-blocks'] } |
| |
| ## |
| # @MigrationCapabilityStatus |
| # |
| # Migration capability information |
| # |
| # @capability: capability enum |
| # |
| # @state: capability state bool |
| # |
| # Since: 1.2 |
| ## |
| { 'type': 'MigrationCapabilityStatus', |
| 'data': { 'capability' : 'MigrationCapability', 'state' : 'bool' } } |
| |
| ## |
| # @migrate-set-capabilities |
| # |
| # Enable/Disable the following migration capabilities (like xbzrle) |
| # |
| # @capabilities: json array of capability modifications to make |
| # |
| # Since: 1.2 |
| ## |
| { 'command': 'migrate-set-capabilities', |
| 'data': { 'capabilities': ['MigrationCapabilityStatus'] } } |
| |
| ## |
| # @query-migrate-capabilities |
| # |
| # Returns information about the current migration capabilities status |
| # |
| # Returns: @MigrationCapabilitiesStatus |
| # |
| # Since: 1.2 |
| ## |
| { 'command': 'query-migrate-capabilities', 'returns': ['MigrationCapabilityStatus']} |
| |
| ## |
| # @MouseInfo: |
| # |
| # Information about a mouse device. |
| # |
| # @name: the name of the mouse device |
| # |
| # @index: the index of the mouse device |
| # |
| # @current: true if this device is currently receiving mouse events |
| # |
| # @absolute: true if this device supports absolute coordinates as input |
| # |
| # Since: 0.14.0 |
| ## |
| { 'type': 'MouseInfo', |
| 'data': {'name': 'str', 'index': 'int', 'current': 'bool', |
| 'absolute': 'bool'} } |
| |
| ## |
| # @query-mice: |
| # |
| # Returns information about each active mouse device |
| # |
| # Returns: a list of @MouseInfo for each device |
| # |
| # Since: 0.14.0 |
| ## |
| { 'command': 'query-mice', 'returns': ['MouseInfo'] } |
| |
| ## |
| # @CpuInfo: |
| # |
| # Information about a virtual CPU |
| # |
| # @CPU: the index of the virtual CPU |
| # |
| # @current: this only exists for backwards compatible and should be ignored |
| # |
| # @halted: true if the virtual CPU is in the halt state. Halt usually refers |
| # to a processor specific low power mode. |
| # |
| # @pc: #optional If the target is i386 or x86_64, this is the 64-bit instruction |
| # pointer. |
| # If the target is Sparc, this is the PC component of the |
| # instruction pointer. |
| # |
| # @nip: #optional If the target is PPC, the instruction pointer |
| # |
| # @npc: #optional If the target is Sparc, the NPC component of the instruction |
| # pointer |
| # |
| # @PC: #optional If the target is MIPS, the instruction pointer |
| # |
| # @thread_id: ID of the underlying host thread |
| # |
| # Since: 0.14.0 |
| # |
| # Notes: @halted is a transient state that changes frequently. By the time the |
| # data is sent to the client, the guest may no longer be halted. |
| ## |
| { 'type': 'CpuInfo', |
| 'data': {'CPU': 'int', 'current': 'bool', 'halted': 'bool', '*pc': 'int', |
| '*nip': 'int', '*npc': 'int', '*PC': 'int', 'thread_id': 'int'} } |
| |
| ## |
| # @query-cpus: |
| # |
| # Returns a list of information about each virtual CPU. |
| # |
| # Returns: a list of @CpuInfo for each virtual CPU |
| # |
| # Since: 0.14.0 |
| ## |
| { 'command': 'query-cpus', 'returns': ['CpuInfo'] } |
| |
| ## |
| # @IOThreadInfo: |
| # |
| # Information about an iothread |
| # |
| # @id: the identifier of the iothread |
| # |
| # @thread-id: ID of the underlying host thread |
| # |
| # Since: 2.0 |
| ## |
| { 'type': 'IOThreadInfo', |
| 'data': {'id': 'str', 'thread-id': 'int'} } |
| |
| ## |
| # @query-iothreads: |
| # |
| # Returns a list of information about each iothread. |
| # |
| # Note this list excludes the QEMU main loop thread, which is not declared |
| # using the -object iothread command-line option. It is always the main thread |
| # of the process. |
| # |
| # Returns: a list of @IOThreadInfo for each iothread |
| # |
| # Since: 2.0 |
| ## |
| { 'command': 'query-iothreads', 'returns': ['IOThreadInfo'] } |
| |
| ## |
| # @BlockDeviceInfo: |
| # |
| # Information about the backing device for a block device. |
| # |
| # @file: the filename of the backing device |
| # |
| # @node-name: #optional the name of the block driver node (Since 2.0) |
| # |
| # @ro: true if the backing device was open read-only |
| # |
| # @drv: the name of the block format used to open the backing device. As of |
| # 0.14.0 this can be: 'blkdebug', 'bochs', 'cloop', 'cow', 'dmg', |
| # 'file', 'file', 'ftp', 'ftps', 'host_cdrom', 'host_device', |
| # 'host_floppy', 'http', 'https', 'nbd', 'parallels', 'qcow', |
| # 'qcow2', 'raw', 'tftp', 'vdi', 'vmdk', 'vpc', 'vvfat' |
| # |
| # @backing_file: #optional the name of the backing file (for copy-on-write) |
| # |
| # @backing_file_depth: number of files in the backing file chain (since: 1.2) |
| # |
| # @encrypted: true if the backing device is encrypted |
| # |
| # @encryption_key_missing: true if the backing device is encrypted but an |
| # valid encryption key is missing |
| # |
| # @detect_zeroes: detect and optimize zero writes (Since 2.1) |
| # |
| # @bps: total throughput limit in bytes per second is specified |
| # |
| # @bps_rd: read throughput limit in bytes per second is specified |
| # |
| # @bps_wr: write throughput limit in bytes per second is specified |
| # |
| # @iops: total I/O operations per second is specified |
| # |
| # @iops_rd: read I/O operations per second is specified |
| # |
| # @iops_wr: write I/O operations per second is specified |
| # |
| # @image: the info of image used (since: 1.6) |
| # |
| # @bps_max: #optional total max in bytes (Since 1.7) |
| # |
| # @bps_rd_max: #optional read max in bytes (Since 1.7) |
| # |
| # @bps_wr_max: #optional write max in bytes (Since 1.7) |
| # |
| # @iops_max: #optional total I/O operations max (Since 1.7) |
| # |
| # @iops_rd_max: #optional read I/O operations max (Since 1.7) |
| # |
| # @iops_wr_max: #optional write I/O operations max (Since 1.7) |
| # |
| # @iops_size: #optional an I/O size in bytes (Since 1.7) |
| # |
| # Since: 0.14.0 |
| # |
| ## |
| { 'type': 'BlockDeviceInfo', |
| 'data': { 'file': 'str', '*node-name': 'str', 'ro': 'bool', 'drv': 'str', |
| '*backing_file': 'str', 'backing_file_depth': 'int', |
| 'encrypted': 'bool', 'encryption_key_missing': 'bool', |
| 'detect_zeroes': 'BlockdevDetectZeroesOptions', |
| 'bps': 'int', 'bps_rd': 'int', 'bps_wr': 'int', |
| 'iops': 'int', 'iops_rd': 'int', 'iops_wr': 'int', |
| 'image': 'ImageInfo', |
| '*bps_max': 'int', '*bps_rd_max': 'int', |
| '*bps_wr_max': 'int', '*iops_max': 'int', |
| '*iops_rd_max': 'int', '*iops_wr_max': 'int', |
| '*iops_size': 'int' } } |
| |
| ## |
| # @BlockDeviceIoStatus: |
| # |
| # An enumeration of block device I/O status. |
| # |
| # @ok: The last I/O operation has succeeded |
| # |
| # @failed: The last I/O operation has failed |
| # |
| # @nospace: The last I/O operation has failed due to a no-space condition |
| # |
| # Since: 1.0 |
| ## |
| { 'enum': 'BlockDeviceIoStatus', 'data': [ 'ok', 'failed', 'nospace' ] } |
| |
| ## |
| # @BlockDeviceMapEntry: |
| # |
| # Entry in the metadata map of the device (returned by "qemu-img map") |
| # |
| # @start: Offset in the image of the first byte described by this entry |
| # (in bytes) |
| # |
| # @length: Length of the range described by this entry (in bytes) |
| # |
| # @depth: Number of layers (0 = top image, 1 = top image's backing file, etc.) |
| # before reaching one for which the range is allocated. The value is |
| # in the range 0 to the depth of the image chain - 1. |
| # |
| # @zero: the sectors in this range read as zeros |
| # |
| # @data: reading the image will actually read data from a file (in particular, |
| # if @offset is present this means that the sectors are not simply |
| # preallocated, but contain actual data in raw format) |
| # |
| # @offset: if present, the image file stores the data for this range in |
| # raw format at the given offset. |
| # |
| # Since 1.7 |
| ## |
| { 'type': 'BlockDeviceMapEntry', |
| 'data': { 'start': 'int', 'length': 'int', 'depth': 'int', 'zero': 'bool', |
| 'data': 'bool', '*offset': 'int' } } |
| |
| ## |
| # @BlockDirtyInfo: |
| # |
| # Block dirty bitmap information. |
| # |
| # @count: number of dirty bytes according to the dirty bitmap |
| # |
| # @granularity: granularity of the dirty bitmap in bytes (since 1.4) |
| # |
| # Since: 1.3 |
| ## |
| { 'type': 'BlockDirtyInfo', |
| 'data': {'count': 'int', 'granularity': 'int'} } |
| |
| ## |
| # @BlockInfo: |
| # |
| # Block device information. This structure describes a virtual device and |
| # the backing device associated with it. |
| # |
| # @device: The device name associated with the virtual device. |
| # |
| # @type: This field is returned only for compatibility reasons, it should |
| # not be used (always returns 'unknown') |
| # |
| # @removable: True if the device supports removable media. |
| # |
| # @locked: True if the guest has locked this device from having its media |
| # removed |
| # |
| # @tray_open: #optional True if the device has a tray and it is open |
| # (only present if removable is true) |
| # |
| # @dirty-bitmaps: #optional dirty bitmaps information (only present if the |
| # driver has one or more dirty bitmaps) (Since 2.0) |
| # |
| # @io-status: #optional @BlockDeviceIoStatus. Only present if the device |
| # supports it and the VM is configured to stop on errors |
| # |
| # @inserted: #optional @BlockDeviceInfo describing the device if media is |
| # present |
| # |
| # Since: 0.14.0 |
| ## |
| { 'type': 'BlockInfo', |
| 'data': {'device': 'str', 'type': 'str', 'removable': 'bool', |
| 'locked': 'bool', '*inserted': 'BlockDeviceInfo', |
| '*tray_open': 'bool', '*io-status': 'BlockDeviceIoStatus', |
| '*dirty-bitmaps': ['BlockDirtyInfo'] } } |
| |
| ## |
| # @query-block: |
| # |
| # Get a list of BlockInfo for all virtual block devices. |
| # |
| # Returns: a list of @BlockInfo describing each virtual block device |
| # |
| # Since: 0.14.0 |
| ## |
| { 'command': 'query-block', 'returns': ['BlockInfo'] } |
| |
| ## |
| # @BlockDeviceStats: |
| # |
| # Statistics of a virtual block device or a block backing device. |
| # |
| # @rd_bytes: The number of bytes read by the device. |
| # |
| # @wr_bytes: The number of bytes written by the device. |
| # |
| # @rd_operations: The number of read operations performed by the device. |
| # |
| # @wr_operations: The number of write operations performed by the device. |
| # |
| # @flush_operations: The number of cache flush operations performed by the |
| # device (since 0.15.0) |
| # |
| # @flush_total_time_ns: Total time spend on cache flushes in nano-seconds |
| # (since 0.15.0). |
| # |
| # @wr_total_time_ns: Total time spend on writes in nano-seconds (since 0.15.0). |
| # |
| # @rd_total_time_ns: Total_time_spend on reads in nano-seconds (since 0.15.0). |
| # |
| # @wr_highest_offset: The offset after the greatest byte written to the |
| # device. The intended use of this information is for |
| # growable sparse files (like qcow2) that are used on top |
| # of a physical device. |
| # |
| # Since: 0.14.0 |
| ## |
| { 'type': 'BlockDeviceStats', |
| 'data': {'rd_bytes': 'int', 'wr_bytes': 'int', 'rd_operations': 'int', |
| 'wr_operations': 'int', 'flush_operations': 'int', |
| 'flush_total_time_ns': 'int', 'wr_total_time_ns': 'int', |
| 'rd_total_time_ns': 'int', 'wr_highest_offset': 'int' } } |
| |
| ## |
| # @BlockStats: |
| # |
| # Statistics of a virtual block device or a block backing device. |
| # |
| # @device: #optional If the stats are for a virtual block device, the name |
| # corresponding to the virtual block device. |
| # |
| # @stats: A @BlockDeviceStats for the device. |
| # |
| # @parent: #optional This describes the file block device if it has one. |
| # |
| # @backing: #optional This describes the backing block device if it has one. |
| # (Since 2.0) |
| # |
| # Since: 0.14.0 |
| ## |
| { 'type': 'BlockStats', |
| 'data': {'*device': 'str', 'stats': 'BlockDeviceStats', |
| '*parent': 'BlockStats', |
| '*backing': 'BlockStats'} } |
| |
| ## |
| # @query-blockstats: |
| # |
| # Query the @BlockStats for all virtual block devices. |
| # |
| # Returns: A list of @BlockStats for each virtual block devices. |
| # |
| # Since: 0.14.0 |
| ## |
| { 'command': 'query-blockstats', 'returns': ['BlockStats'] } |
| |
| ## |
| # @VncClientInfo: |
| # |
| # Information about a connected VNC client. |
| # |
| # @host: The host name of the client. QEMU tries to resolve this to a DNS name |
| # when possible. |
| # |
| # @family: 'ipv6' if the client is connected via IPv6 and TCP |
| # 'ipv4' if the client is connected via IPv4 and TCP |
| # 'unix' if the client is connected via a unix domain socket |
| # 'unknown' otherwise |
| # |
| # @service: The service name of the client's port. This may depends on the |
| # host system's service database so symbolic names should not be |
| # relied on. |
| # |
| # @x509_dname: #optional If x509 authentication is in use, the Distinguished |
| # Name of the client. |
| # |
| # @sasl_username: #optional If SASL authentication is in use, the SASL username |
| # used for authentication. |
| # |
| # Since: 0.14.0 |
| ## |
| { 'type': 'VncClientInfo', |
| 'data': {'host': 'str', 'family': 'str', 'service': 'str', |
| '*x509_dname': 'str', '*sasl_username': 'str'} } |
| |
| ## |
| # @VncInfo: |
| # |
| # Information about the VNC session. |
| # |
| # @enabled: true if the VNC server is enabled, false otherwise |
| # |
| # @host: #optional The hostname the VNC server is bound to. This depends on |
| # the name resolution on the host and may be an IP address. |
| # |
| # @family: #optional 'ipv6' if the host is listening for IPv6 connections |
| # 'ipv4' if the host is listening for IPv4 connections |
| # 'unix' if the host is listening on a unix domain socket |
| # 'unknown' otherwise |
| # |
| # @service: #optional The service name of the server's port. This may depends |
| # on the host system's service database so symbolic names should not |
| # be relied on. |
| # |
| # @auth: #optional the current authentication type used by the server |
| # 'none' if no authentication is being used |
| # 'vnc' if VNC authentication is being used |
| # 'vencrypt+plain' if VEncrypt is used with plain text authentication |
| # 'vencrypt+tls+none' if VEncrypt is used with TLS and no authentication |
| # 'vencrypt+tls+vnc' if VEncrypt is used with TLS and VNC authentication |
| # 'vencrypt+tls+plain' if VEncrypt is used with TLS and plain text auth |
| # 'vencrypt+x509+none' if VEncrypt is used with x509 and no auth |
| # 'vencrypt+x509+vnc' if VEncrypt is used with x509 and VNC auth |
| # 'vencrypt+x509+plain' if VEncrypt is used with x509 and plain text auth |
| # 'vencrypt+tls+sasl' if VEncrypt is used with TLS and SASL auth |
| # 'vencrypt+x509+sasl' if VEncrypt is used with x509 and SASL auth |
| # |
| # @clients: a list of @VncClientInfo of all currently connected clients |
| # |
| # Since: 0.14.0 |
| ## |
| { 'type': 'VncInfo', |
| 'data': {'enabled': 'bool', '*host': 'str', '*family': 'str', |
| '*service': 'str', '*auth': 'str', '*clients': ['VncClientInfo']} } |
| |
| ## |
| # @query-vnc: |
| # |
| # Returns information about the current VNC server |
| # |
| # Returns: @VncInfo |
| # |
| # Since: 0.14.0 |
| ## |
| { 'command': 'query-vnc', 'returns': 'VncInfo' } |
| |
| ## |
| # @SpiceChannel |
| # |
| # Information about a SPICE client channel. |
| # |
| # @host: The host name of the client. QEMU tries to resolve this to a DNS name |
| # when possible. |
| # |
| # @family: 'ipv6' if the client is connected via IPv6 and TCP |
| # 'ipv4' if the client is connected via IPv4 and TCP |
| # 'unix' if the client is connected via a unix domain socket |
| # 'unknown' otherwise |
| # |
| # @port: The client's port number. |
| # |
| # @connection-id: SPICE connection id number. All channels with the same id |
| # belong to the same SPICE session. |
| # |
| # @connection-type: SPICE channel type number. "1" is the main control |
| # channel, filter for this one if you want to track spice |
| # sessions only |
| # |
| # @channel-id: SPICE channel ID number. Usually "0", might be different when |
| # multiple channels of the same type exist, such as multiple |
| # display channels in a multihead setup |
| # |
| # @tls: true if the channel is encrypted, false otherwise. |
| # |
| # Since: 0.14.0 |
| ## |
| { 'type': 'SpiceChannel', |
| 'data': {'host': 'str', 'family': 'str', 'port': 'str', |
| 'connection-id': 'int', 'channel-type': 'int', 'channel-id': 'int', |
| 'tls': 'bool'} } |
| |
| ## |
| # @SpiceQueryMouseMode |
| # |
| # An enumeration of Spice mouse states. |
| # |
| # @client: Mouse cursor position is determined by the client. |
| # |
| # @server: Mouse cursor position is determined by the server. |
| # |
| # @unknown: No information is available about mouse mode used by |
| # the spice server. |
| # |
| # Note: spice/enums.h has a SpiceMouseMode already, hence the name. |
| # |
| # Since: 1.1 |
| ## |
| { 'enum': 'SpiceQueryMouseMode', |
| 'data': [ 'client', 'server', 'unknown' ] } |
| |
| ## |
| # @SpiceInfo |
| # |
| # Information about the SPICE session. |
| # |
| # @enabled: true if the SPICE server is enabled, false otherwise |
| # |
| # @migrated: true if the last guest migration completed and spice |
| # migration had completed as well. false otherwise. |
| # |
| # @host: #optional The hostname the SPICE server is bound to. This depends on |
| # the name resolution on the host and may be an IP address. |
| # |
| # @port: #optional The SPICE server's port number. |
| # |
| # @compiled-version: #optional SPICE server version. |
| # |
| # @tls-port: #optional The SPICE server's TLS port number. |
| # |
| # @auth: #optional the current authentication type used by the server |
| # 'none' if no authentication is being used |
| # 'spice' uses SASL or direct TLS authentication, depending on command |
| # line options |
| # |
| # @mouse-mode: The mode in which the mouse cursor is displayed currently. Can |
| # be determined by the client or the server, or unknown if spice |
| # server doesn't provide this information. |
| # |
| # Since: 1.1 |
| # |
| # @channels: a list of @SpiceChannel for each active spice channel |
| # |
| # Since: 0.14.0 |
| ## |
| { 'type': 'SpiceInfo', |
| 'data': {'enabled': 'bool', 'migrated': 'bool', '*host': 'str', '*port': 'int', |
| '*tls-port': 'int', '*auth': 'str', '*compiled-version': 'str', |
| 'mouse-mode': 'SpiceQueryMouseMode', '*channels': ['SpiceChannel']} } |
| |
| ## |
| # @query-spice |
| # |
| # Returns information about the current SPICE server |
| # |
| # Returns: @SpiceInfo |
| # |
| # Since: 0.14.0 |
| ## |
| { 'command': 'query-spice', 'returns': 'SpiceInfo' } |
| |
| ## |
| # @BalloonInfo: |
| # |
| # Information about the guest balloon device. |
| # |
| # @actual: the number of bytes the balloon currently contains |
| # |
| # Since: 0.14.0 |
| # |
| ## |
| { 'type': 'BalloonInfo', 'data': {'actual': 'int' } } |
| |
| ## |
| # @query-balloon: |
| # |
| # Return information about the balloon device. |
| # |
| # Returns: @BalloonInfo on success |
| # If the balloon driver is enabled but not functional because the KVM |
| # kernel module cannot support it, KvmMissingCap |
| # If no balloon device is present, DeviceNotActive |
| # |
| # Since: 0.14.0 |
| ## |
| { 'command': 'query-balloon', 'returns': 'BalloonInfo' } |
| |
| ## |
| # @PciMemoryRange: |
| # |
| # A PCI device memory region |
| # |
| # @base: the starting address (guest physical) |
| # |
| # @limit: the ending address (guest physical) |
| # |
| # Since: 0.14.0 |
| ## |
| { 'type': 'PciMemoryRange', 'data': {'base': 'int', 'limit': 'int'} } |
| |
| ## |
| # @PciMemoryRegion |
| # |
| # Information about a PCI device I/O region. |
| # |
| # @bar: the index of the Base Address Register for this region |
| # |
| # @type: 'io' if the region is a PIO region |
| # 'memory' if the region is a MMIO region |
| # |
| # @prefetch: #optional if @type is 'memory', true if the memory is prefetchable |
| # |
| # @mem_type_64: #optional if @type is 'memory', true if the BAR is 64-bit |
| # |
| # Since: 0.14.0 |
| ## |
| { 'type': 'PciMemoryRegion', |
| 'data': {'bar': 'int', 'type': 'str', 'address': 'int', 'size': 'int', |
| '*prefetch': 'bool', '*mem_type_64': 'bool' } } |
| |
| ## |
| # @PciBridgeInfo: |
| # |
| # Information about a PCI Bridge device |
| # |
| # @bus.number: primary bus interface number. This should be the number of the |
| # bus the device resides on. |
| # |
| # @bus.secondary: secondary bus interface number. This is the number of the |
| # main bus for the bridge |
| # |
| # @bus.subordinate: This is the highest number bus that resides below the |
| # bridge. |
| # |
| # @bus.io_range: The PIO range for all devices on this bridge |
| # |
| # @bus.memory_range: The MMIO range for all devices on this bridge |
| # |
| # @bus.prefetchable_range: The range of prefetchable MMIO for all devices on |
| # this bridge |
| # |
| # @devices: a list of @PciDeviceInfo for each device on this bridge |
| # |
| # Since: 0.14.0 |
| ## |
| { 'type': 'PciBridgeInfo', |
| 'data': {'bus': { 'number': 'int', 'secondary': 'int', 'subordinate': 'int', |
| 'io_range': 'PciMemoryRange', |
| 'memory_range': 'PciMemoryRange', |
| 'prefetchable_range': 'PciMemoryRange' }, |
| '*devices': ['PciDeviceInfo']} } |
| |
| ## |
| # @PciDeviceInfo: |
| # |
| # Information about a PCI device |
| # |
| # @bus: the bus number of the device |
| # |
| # @slot: the slot the device is located in |
| # |
| # @function: the function of the slot used by the device |
| # |
| # @class_info.desc: #optional a string description of the device's class |
| # |
| # @class_info.class: the class code of the device |
| # |
| # @id.device: the PCI device id |
| # |
| # @id.vendor: the PCI vendor id |
| # |
| # @irq: #optional if an IRQ is assigned to the device, the IRQ number |
| # |
| # @qdev_id: the device name of the PCI device |
| # |
| # @pci_bridge: if the device is a PCI bridge, the bridge information |
| # |
| # @regions: a list of the PCI I/O regions associated with the device |
| # |
| # Notes: the contents of @class_info.desc are not stable and should only be |
| # treated as informational. |
| # |
| # Since: 0.14.0 |
| ## |
| { 'type': 'PciDeviceInfo', |
| 'data': {'bus': 'int', 'slot': 'int', 'function': 'int', |
| 'class_info': {'*desc': 'str', 'class': 'int'}, |
| 'id': {'device': 'int', 'vendor': 'int'}, |
| '*irq': 'int', 'qdev_id': 'str', '*pci_bridge': 'PciBridgeInfo', |
| 'regions': ['PciMemoryRegion']} } |
| |
| ## |
| # @PciInfo: |
| # |
| # Information about a PCI bus |
| # |
| # @bus: the bus index |
| # |
| # @devices: a list of devices on this bus |
| # |
| # Since: 0.14.0 |
| ## |
| { 'type': 'PciInfo', 'data': {'bus': 'int', 'devices': ['PciDeviceInfo']} } |
| |
| ## |
| # @query-pci: |
| # |
| # Return information about the PCI bus topology of the guest. |
| # |
| # Returns: a list of @PciInfo for each PCI bus |
| # |
| # Since: 0.14.0 |
| ## |
| { 'command': 'query-pci', 'returns': ['PciInfo'] } |
| |
| ## |
| # @BlockdevOnError: |
| # |
| # An enumeration of possible behaviors for errors on I/O operations. |
| # The exact meaning depends on whether the I/O was initiated by a guest |
| # or by a block job |
| # |
| # @report: for guest operations, report the error to the guest; |
| # for jobs, cancel the job |
| # |
| # @ignore: ignore the error, only report a QMP event (BLOCK_IO_ERROR |
| # or BLOCK_JOB_ERROR) |
| # |
| # @enospc: same as @stop on ENOSPC, same as @report otherwise. |
| # |
| # @stop: for guest operations, stop the virtual machine; |
| # for jobs, pause the job |
| # |
| # Since: 1.3 |
| ## |
| { 'enum': 'BlockdevOnError', |
| 'data': ['report', 'ignore', 'enospc', 'stop'] } |
| |
| ## |
| # @MirrorSyncMode: |
| # |
| # An enumeration of possible behaviors for the initial synchronization |
| # phase of storage mirroring. |
| # |
| # @top: copies data in the topmost image to the destination |
| # |
| # @full: copies data from all images to the destination |
| # |
| # @none: only copy data written from now on |
| # |
| # Since: 1.3 |
| ## |
| { 'enum': 'MirrorSyncMode', |
| 'data': ['top', 'full', 'none'] } |
| |
| ## |
| # @BlockJobType: |
| # |
| # Type of a block job. |
| # |
| # @commit: block commit job type, see "block-commit" |
| # |
| # @stream: block stream job type, see "block-stream" |
| # |
| # @mirror: drive mirror job type, see "drive-mirror" |
| # |
| # @backup: drive backup job type, see "drive-backup" |
| # |
| # Since: 1.7 |
| ## |
| { 'enum': 'BlockJobType', |
| 'data': ['commit', 'stream', 'mirror', 'backup'] } |
| |
| ## |
| # @BlockJobInfo: |
| # |
| # Information about a long-running block device operation. |
| # |
| # @type: the job type ('stream' for image streaming) |
| # |
| # @device: the block device name |
| # |
| # @len: the maximum progress value |
| # |
| # @busy: false if the job is known to be in a quiescent state, with |
| # no pending I/O. Since 1.3. |
| # |
| # @paused: whether the job is paused or, if @busy is true, will |
| # pause itself as soon as possible. Since 1.3. |
| # |
| # @offset: the current progress value |
| # |
| # @speed: the rate limit, bytes per second |
| # |
| # @io-status: the status of the job (since 1.3) |
| # |
| # Since: 1.1 |
| ## |
| { 'type': 'BlockJobInfo', |
| 'data': {'type': 'str', 'device': 'str', 'len': 'int', |
| 'offset': 'int', 'busy': 'bool', 'paused': 'bool', 'speed': 'int', |
| 'io-status': 'BlockDeviceIoStatus'} } |
| |
| ## |
| # @query-block-jobs: |
| # |
| # Return information about long-running block device operations. |
| # |
| # Returns: a list of @BlockJobInfo for each active block job |
| # |
| # Since: 1.1 |
| ## |
| { 'command': 'query-block-jobs', 'returns': ['BlockJobInfo'] } |
| |
| ## |
| # @quit: |
| # |
| # This command will cause the QEMU process to exit gracefully. While every |
| # attempt is made to send the QMP response before terminating, this is not |
| # guaranteed. When using this interface, a premature EOF would not be |
| # unexpected. |
| # |
| # Since: 0.14.0 |
| ## |
| { 'command': 'quit' } |
| |
| ## |
| # @stop: |
| # |
| # Stop all guest VCPU execution. |
| # |
| # Since: 0.14.0 |
| # |
| # Notes: This function will succeed even if the guest is already in the stopped |
| # state. In "inmigrate" state, it will ensure that the guest |
| # remains paused once migration finishes, as if the -S option was |
| # passed on the command line. |
| ## |
| { 'command': 'stop' } |
| |
| ## |
| # @system_reset: |
| # |
| # Performs a hard reset of a guest. |
| # |
| # Since: 0.14.0 |
| ## |
| { 'command': 'system_reset' } |
| |
| ## |
| # @system_powerdown: |
| # |
| # Requests that a guest perform a powerdown operation. |
| # |
| # Since: 0.14.0 |
| # |
| # Notes: A guest may or may not respond to this command. This command |
| # returning does not indicate that a guest has accepted the request or |
| # that it has shut down. Many guests will respond to this command by |
| # prompting the user in some way. |
| ## |
| { 'command': 'system_powerdown' } |
| |
| ## |
| # @cpu: |
| # |
| # This command is a nop that is only provided for the purposes of compatibility. |
| # |
| # Since: 0.14.0 |
| # |
| # Notes: Do not use this command. |
| ## |
| { 'command': 'cpu', 'data': {'index': 'int'} } |
| |
| ## |
| # @cpu-add |
| # |
| # Adds CPU with specified ID |
| # |
| # @id: ID of CPU to be created, valid values [0..max_cpus) |
| # |
| # Returns: Nothing on success |
| # |
| # Since 1.5 |
| ## |
| { 'command': 'cpu-add', 'data': {'id': 'int'} } |
| |
| ## |
| # @memsave: |
| # |
| # Save a portion of guest memory to a file. |
| # |
| # @val: the virtual address of the guest to start from |
| # |
| # @size: the size of memory region to save |
| # |
| # @filename: the file to save the memory to as binary data |
| # |
| # @cpu-index: #optional the index of the virtual CPU to use for translating the |
| # virtual address (defaults to CPU 0) |
| # |
| # Returns: Nothing on success |
| # |
| # Since: 0.14.0 |
| # |
| # Notes: Errors were not reliably returned until 1.1 |
| ## |
| { 'command': 'memsave', |
| 'data': {'val': 'int', 'size': 'int', 'filename': 'str', '*cpu-index': 'int'} } |
| |
| ## |
| # @pmemsave: |
| # |
| # Save a portion of guest physical memory to a file. |
| # |
| # @val: the physical address of the guest to start from |
| # |
| # @size: the size of memory region to save |
| # |
| # @filename: the file to save the memory to as binary data |
| # |
| # Returns: Nothing on success |
| # |
| # Since: 0.14.0 |
| # |
| # Notes: Errors were not reliably returned until 1.1 |
| ## |
| { 'command': 'pmemsave', |
| 'data': {'val': 'int', 'size': 'int', 'filename': 'str'} } |
| |
| ## |
| # @cont: |
| # |
| # Resume guest VCPU execution. |
| # |
| # Since: 0.14.0 |
| # |
| # Returns: If successful, nothing |
| # If QEMU was started with an encrypted block device and a key has |
| # not yet been set, DeviceEncrypted. |
| # |
| # Notes: This command will succeed if the guest is currently running. It |
| # will also succeed if the guest is in the "inmigrate" state; in |
| # this case, the effect of the command is to make sure the guest |
| # starts once migration finishes, removing the effect of the -S |
| # command line option if it was passed. |
| ## |
| { 'command': 'cont' } |
| |
| ## |
| # @system_wakeup: |
| # |
| # Wakeup guest from suspend. Does nothing in case the guest isn't suspended. |
| # |
| # Since: 1.1 |
| # |
| # Returns: nothing. |
| ## |
| { 'command': 'system_wakeup' } |
| |
| ## |
| # @inject-nmi: |
| # |
| # Injects an Non-Maskable Interrupt into all guest's VCPUs. |
| # |
| # Returns: If successful, nothing |
| # |
| # Since: 0.14.0 |
| # |
| # Notes: Only x86 Virtual Machines support this command. |
| ## |
| { 'command': 'inject-nmi' } |
| |
| ## |
| # @set_link: |
| # |
| # Sets the link status of a virtual network adapter. |
| # |
| # @name: the device name of the virtual network adapter |
| # |
| # @up: true to set the link status to be up |
| # |
| # Returns: Nothing on success |
| # If @name is not a valid network device, DeviceNotFound |
| # |
| # Since: 0.14.0 |
| # |
| # Notes: Not all network adapters support setting link status. This command |
| # will succeed even if the network adapter does not support link status |
| # notification. |
| ## |
| { 'command': 'set_link', 'data': {'name': 'str', 'up': 'bool'} } |
| |
| ## |
| # @block_passwd: |
| # |
| # This command sets the password of a block device that has not been open |
| # with a password and requires one. |
| # |
| # The two cases where this can happen are a block device is created through |
| # QEMU's initial command line or a block device is changed through the legacy |
| # @change interface. |
| # |
| # In the event that the block device is created through the initial command |
| # line, the VM will start in the stopped state regardless of whether '-S' is |
| # used. The intention is for a management tool to query the block devices to |
| # determine which ones are encrypted, set the passwords with this command, and |
| # then start the guest with the @cont command. |
| # |
| # Either @device or @node-name must be set but not both. |
| # |
| # @device: #optional the name of the block backend device to set the password on |
| # |
| # @node-name: #optional graph node name to set the password on (Since 2.0) |
| # |
| # @password: the password to use for the device |
| # |
| # Returns: nothing on success |
| # If @device is not a valid block device, DeviceNotFound |
| # If @device is not encrypted, DeviceNotEncrypted |
| # |
| # Notes: Not all block formats support encryption and some that do are not |
| # able to validate that a password is correct. Disk corruption may |
| # occur if an invalid password is specified. |
| # |
| # Since: 0.14.0 |
| ## |
| { 'command': 'block_passwd', 'data': {'*device': 'str', |
| '*node-name': 'str', 'password': 'str'} } |
| |
| ## |
| # @balloon: |
| # |
| # Request the balloon driver to change its balloon size. |
| # |
| # @value: the target size of the balloon in bytes |
| # |
| # Returns: Nothing on success |
| # If the balloon driver is enabled but not functional because the KVM |
| # kernel module cannot support it, KvmMissingCap |
| # If no balloon device is present, DeviceNotActive |
| # |
| # Notes: This command just issues a request to the guest. When it returns, |
| # the balloon size may not have changed. A guest can change the balloon |
| # size independent of this command. |
| # |
| # Since: 0.14.0 |
| ## |
| { 'command': 'balloon', 'data': {'value': 'int'} } |
| |
| ## |
| # @block_resize |
| # |
| # Resize a block image while a guest is running. |
| # |
| # Either @device or @node-name must be set but not both. |
| # |
| # @device: #optional the name of the device to get the image resized |
| # |
| # @node-name: #optional graph node name to get the image resized (Since 2.0) |
| # |
| # @size: new image size in bytes |
| # |
| # Returns: nothing on success |
| # If @device is not a valid block device, DeviceNotFound |
| # |
| # Since: 0.14.0 |
| ## |
| { 'command': 'block_resize', 'data': { '*device': 'str', |
| '*node-name': 'str', |
| 'size': 'int' }} |
| |
| ## |
| # @NewImageMode |
| # |
| # An enumeration that tells QEMU how to set the backing file path in |
| # a new image file. |
| # |
| # @existing: QEMU should look for an existing image file. |
| # |
| # @absolute-paths: QEMU should create a new image with absolute paths |
| # for the backing file. If there is no backing file available, the new |
| # image will not be backed either. |
| # |
| # Since: 1.1 |
| ## |
| { 'enum': 'NewImageMode', |
| 'data': [ 'existing', 'absolute-paths' ] } |
| |
| ## |
| # @BlockdevSnapshot |
| # |
| # Either @device or @node-name must be set but not both. |
| # |
| # @device: #optional the name of the device to generate the snapshot from. |
| # |
| # @node-name: #optional graph node name to generate the snapshot from (Since 2.0) |
| # |
| # @snapshot-file: the target of the new image. A new file will be created. |
| # |
| # @snapshot-node-name: #optional the graph node name of the new image (Since 2.0) |
| # |
| # @format: #optional the format of the snapshot image, default is 'qcow2'. |
| # |
| # @mode: #optional whether and how QEMU should create a new image, default is |
| # 'absolute-paths'. |
| ## |
| { 'type': 'BlockdevSnapshot', |
| 'data': { '*device': 'str', '*node-name': 'str', |
| 'snapshot-file': 'str', '*snapshot-node-name': 'str', |
| '*format': 'str', '*mode': 'NewImageMode' } } |
| |
| ## |
| # @BlockdevSnapshotInternal |
| # |
| # @device: the name of the device to generate the snapshot from |
| # |
| # @name: the name of the internal snapshot to be created |
| # |
| # Notes: In transaction, if @name is empty, or any snapshot matching @name |
| # exists, the operation will fail. Only some image formats support it, |
| # for example, qcow2, rbd, and sheepdog. |
| # |
| # Since: 1.7 |
| ## |
| { 'type': 'BlockdevSnapshotInternal', |
| 'data': { 'device': 'str', 'name': 'str' } } |
| |
| ## |
| # @DriveBackup |
| # |
| # @device: the name of the device which should be copied. |
| # |
| # @target: the target of the new image. If the file exists, or if it |
| # is a device, the existing file/device will be used as the new |
| # destination. If it does not exist, a new file will be created. |
| # |
| # @format: #optional the format of the new destination, default is to |
| # probe if @mode is 'existing', else the format of the source |
| # |
| # @sync: what parts of the disk image should be copied to the destination |
| # (all the disk, only the sectors allocated in the topmost image, or |
| # only new I/O). |
| # |
| # @mode: #optional whether and how QEMU should create a new image, default is |
| # 'absolute-paths'. |
| # |
| # @speed: #optional the maximum speed, in bytes per second |
| # |
| # @on-source-error: #optional the action to take on an error on the source, |
| # default 'report'. 'stop' and 'enospc' can only be used |
| # if the block device supports io-status (see BlockInfo). |
| # |
| # @on-target-error: #optional the action to take on an error on the target, |
| # default 'report' (no limitations, since this applies to |
| # a different block device than @device). |
| # |
| # Note that @on-source-error and @on-target-error only affect background I/O. |
| # If an error occurs during a guest write request, the device's rerror/werror |
| # actions will be used. |
| # |
| # Since: 1.6 |
| ## |
| { 'type': 'DriveBackup', |
| 'data': { 'device': 'str', 'target': 'str', '*format': 'str', |
| 'sync': 'MirrorSyncMode', '*mode': 'NewImageMode', |
| '*speed': 'int', |
| '*on-source-error': 'BlockdevOnError', |
| '*on-target-error': 'BlockdevOnError' } } |
| |
| ## |
| # @Abort |
| # |
| # This action can be used to test transaction failure. |
| # |
| # Since: 1.6 |
| ### |
| { 'type': 'Abort', |
| 'data': { } } |
| |
| ## |
| # @TransactionAction |
| # |
| # A discriminated record of operations that can be performed with |
| # @transaction. |
| ## |
| { 'union': 'TransactionAction', |
| 'data': { |
| 'blockdev-snapshot-sync': 'BlockdevSnapshot', |
| 'drive-backup': 'DriveBackup', |
| 'abort': 'Abort', |
| 'blockdev-snapshot-internal-sync': 'BlockdevSnapshotInternal' |
| } } |
| |
| ## |
| # @transaction |
| # |
| # Executes a number of transactionable QMP commands atomically. If any |
| # operation fails, then the entire set of actions will be abandoned and the |
| # appropriate error returned. |
| # |
| # List of: |
| # @TransactionAction: information needed for the respective operation |
| # |
| # Returns: nothing on success |
| # Errors depend on the operations of the transaction |
| # |
| # Note: The transaction aborts on the first failure. Therefore, there will be |
| # information on only one failed operation returned in an error condition, and |
| # subsequent actions will not have been attempted. |
| # |
| # Since 1.1 |
| ## |
| { 'command': 'transaction', |
| 'data': { 'actions': [ 'TransactionAction' ] } } |
| |
| ## |
| # @blockdev-snapshot-sync |
| # |
| # Generates a synchronous snapshot of a block device. |
| # |
| # For the arguments, see the documentation of BlockdevSnapshot. |
| # |
| # Returns: nothing on success |
| # If @device is not a valid block device, DeviceNotFound |
| # |
| # Since 0.14.0 |
| ## |
| { 'command': 'blockdev-snapshot-sync', |
| 'data': 'BlockdevSnapshot' } |
| |
| ## |
| # @blockdev-snapshot-internal-sync |
| # |
| # Synchronously take an internal snapshot of a block device, when the format |
| # of the image used supports it. |
| # |
| # For the arguments, see the documentation of BlockdevSnapshotInternal. |
| # |
| # Returns: nothing on success |
| # If @device is not a valid block device, DeviceNotFound |
| # If any snapshot matching @name exists, or @name is empty, |
| # GenericError |
| # If the format of the image used does not support it, |
| # BlockFormatFeatureNotSupported |
| # |
| # Since 1.7 |
| ## |
| { 'command': 'blockdev-snapshot-internal-sync', |
| 'data': 'BlockdevSnapshotInternal' } |
| |
| ## |
| # @blockdev-snapshot-delete-internal-sync |
| # |
| # Synchronously delete an internal snapshot of a block device, when the format |
| # of the image used support it. The snapshot is identified by name or id or |
| # both. One of the name or id is required. Return SnapshotInfo for the |
| # successfully deleted snapshot. |
| # |
| # @device: the name of the device to delete the snapshot from |
| # |
| # @id: optional the snapshot's ID to be deleted |
| # |
| # @name: optional the snapshot's name to be deleted |
| # |
| # Returns: SnapshotInfo on success |
| # If @device is not a valid block device, DeviceNotFound |
| # If snapshot not found, GenericError |
| # If the format of the image used does not support it, |
| # BlockFormatFeatureNotSupported |
| # If @id and @name are both not specified, GenericError |
| # |
| # Since 1.7 |
| ## |
| { 'command': 'blockdev-snapshot-delete-internal-sync', |
| 'data': { 'device': 'str', '*id': 'str', '*name': 'str'}, |
| 'returns': 'SnapshotInfo' } |
| |
| ## |
| # @human-monitor-command: |
| # |
| # Execute a command on the human monitor and return the output. |
| # |
| # @command-line: the command to execute in the human monitor |
| # |
| # @cpu-index: #optional The CPU to use for commands that require an implicit CPU |
| # |
| # Returns: the output of the command as a string |
| # |
| # Since: 0.14.0 |
| # |
| # Notes: This command only exists as a stop-gap. Its use is highly |
| # discouraged. The semantics of this command are not guaranteed. |
| # |
| # Known limitations: |
| # |
| # o This command is stateless, this means that commands that depend |
| # on state information (such as getfd) might not work |
| # |
| # o Commands that prompt the user for data (eg. 'cont' when the block |
| # device is encrypted) don't currently work |
| ## |
| { 'command': 'human-monitor-command', |
| 'data': {'command-line': 'str', '*cpu-index': 'int'}, |
| 'returns': 'str' } |
| |
| ## |
| # @block-commit |
| # |
| # Live commit of data from overlay image nodes into backing nodes - i.e., |
| # writes data between 'top' and 'base' into 'base'. |
| # |
| # @device: the name of the device |
| # |
| # @base: #optional The file name of the backing image to write data into. |
| # If not specified, this is the deepest backing image |
| # |
| # @top: The file name of the backing image within the image chain, |
| # which contains the topmost data to be committed down. |
| # |
| # If top == base, that is an error. |
| # If top == active, the job will not be completed by itself, |
| # user needs to complete the job with the block-job-complete |
| # command after getting the ready event. (Since 2.0) |
| # |
| # If the base image is smaller than top, then the base image |
| # will be resized to be the same size as top. If top is |
| # smaller than the base image, the base will not be |
| # truncated. If you want the base image size to match the |
| # size of the smaller top, you can safely truncate it |
| # yourself once the commit operation successfully completes. |
| # |
| # |
| # @speed: #optional the maximum speed, in bytes per second |
| # |
| # Returns: Nothing on success |
| # If commit or stream is already active on this device, DeviceInUse |
| # If @device does not exist, DeviceNotFound |
| # If image commit is not supported by this device, NotSupported |
| # If @base or @top is invalid, a generic error is returned |
| # If @speed is invalid, InvalidParameter |
| # |
| # Since: 1.3 |
| # |
| ## |
| { 'command': 'block-commit', |
| 'data': { 'device': 'str', '*base': 'str', 'top': 'str', |
| '*speed': 'int' } } |
| |
| ## |
| # @drive-backup |
| # |
| # Start a point-in-time copy of a block device to a new destination. The |
| # status of ongoing drive-backup operations can be checked with |
| # query-block-jobs where the BlockJobInfo.type field has the value 'backup'. |
| # The operation can be stopped before it has completed using the |
| # block-job-cancel command. |
| # |
| # For the arguments, see the documentation of DriveBackup. |
| # |
| # Returns: nothing on success |
| # If @device is not a valid block device, DeviceNotFound |
| # |
| # Since 1.6 |
| ## |
| { 'command': 'drive-backup', 'data': 'DriveBackup' } |
| |
| ## |
| # @query-named-block-nodes |
| # |
| # Get the named block driver list |
| # |
| # Returns: the list of BlockDeviceInfo |
| # |
| # Since 2.0 |
| ## |
| { 'command': 'query-named-block-nodes', 'returns': [ 'BlockDeviceInfo' ] } |
| |
| ## |
| # @drive-mirror |
| # |
| # Start mirroring a block device's writes to a new destination. |
| # |
| # @device: the name of the device whose writes should be mirrored. |
| # |
| # @target: the target of the new image. If the file exists, or if it |
| # is a device, the existing file/device will be used as the new |
| # destination. If it does not exist, a new file will be created. |
| # |
| # @format: #optional the format of the new destination, default is to |
| # probe if @mode is 'existing', else the format of the source |
| # |
| # @mode: #optional whether and how QEMU should create a new image, default is |
| # 'absolute-paths'. |
| # |
| # @speed: #optional the maximum speed, in bytes per second |
| # |
| # @sync: what parts of the disk image should be copied to the destination |
| # (all the disk, only the sectors allocated in the topmost image, or |
| # only new I/O). |
| # |
| # @granularity: #optional granularity of the dirty bitmap, default is 64K |
| # if the image format doesn't have clusters, 4K if the clusters |
| # are smaller than that, else the cluster size. Must be a |
| # power of 2 between 512 and 64M (since 1.4). |
| # |
| # @buf-size: #optional maximum amount of data in flight from source to |
| # target (since 1.4). |
| # |
| # @on-source-error: #optional the action to take on an error on the source, |
| # default 'report'. 'stop' and 'enospc' can only be used |
| # if the block device supports io-status (see BlockInfo). |
| # |
| # @on-target-error: #optional the action to take on an error on the target, |
| # default 'report' (no limitations, since this applies to |
| # a different block device than @device). |
| # |
| # Returns: nothing on success |
| # If @device is not a valid block device, DeviceNotFound |
| # |
| # Since 1.3 |
| ## |
| { 'command': 'drive-mirror', |
| 'data': { 'device': 'str', 'target': 'str', '*format': 'str', |
| 'sync': 'MirrorSyncMode', '*mode': 'NewImageMode', |
| '*speed': 'int', '*granularity': 'uint32', |
| '*buf-size': 'int', '*on-source-error': 'BlockdevOnError', |
| '*on-target-error': 'BlockdevOnError' } } |
| |
| ## |
| # @migrate_cancel |
| # |
| # Cancel the current executing migration process. |
| # |
| # Returns: nothing on success |
| # |
| # Notes: This command succeeds even if there is no migration process running. |
| # |
| # Since: 0.14.0 |
| ## |
| { 'command': 'migrate_cancel' } |
| |
| ## |
| # @migrate_set_downtime |
| # |
| # Set maximum tolerated downtime for migration. |
| # |
| # @value: maximum downtime in seconds |
| # |
| # Returns: nothing on success |
| # |
| # Since: 0.14.0 |
| ## |
| { 'command': 'migrate_set_downtime', 'data': {'value': 'number'} } |
| |
| ## |
| # @migrate_set_speed |
| # |
| # Set maximum speed for migration. |
| # |
| # @value: maximum speed in bytes. |
| # |
| # Returns: nothing on success |
| # |
| # Notes: A value lesser than zero will be automatically round up to zero. |
| # |
| # Since: 0.14.0 |
| ## |
| { 'command': 'migrate_set_speed', 'data': {'value': 'int'} } |
| |
| ## |
| # @migrate-set-cache-size |
| # |
| # Set XBZRLE cache size |
| # |
| # @value: cache size in bytes |
| # |
| # The size will be rounded down to the nearest power of 2. |
| # The cache size can be modified before and during ongoing migration |
| # |
| # Returns: nothing on success |
| # |
| # Since: 1.2 |
| ## |
| { 'command': 'migrate-set-cache-size', 'data': {'value': 'int'} } |
| |
| ## |
| # @query-migrate-cache-size |
| # |
| # query XBZRLE cache size |
| # |
| # Returns: XBZRLE cache size in bytes |
| # |
| # Since: 1.2 |
| ## |
| { 'command': 'query-migrate-cache-size', 'returns': 'int' } |
| |
| ## |
| # @ObjectPropertyInfo: |
| # |
| # @name: the name of the property |
| # |
| # @type: the type of the property. This will typically come in one of four |
| # forms: |
| # |
| # 1) A primitive type such as 'u8', 'u16', 'bool', 'str', or 'double'. |
| # These types are mapped to the appropriate JSON type. |
| # |
| # 2) A legacy type in the form 'legacy<subtype>' where subtype is the |
| # legacy qdev typename. These types are always treated as strings. |
| # |
| # 3) A child type in the form 'child<subtype>' where subtype is a qdev |
| # device type name. Child properties create the composition tree. |
| # |
| # 4) A link type in the form 'link<subtype>' where subtype is a qdev |
| # device type name. Link properties form the device model graph. |
| # |
| # Since: 1.2 |
| ## |
| { 'type': 'ObjectPropertyInfo', |
| 'data': { 'name': 'str', 'type': 'str' } } |
| |
| ## |
| # @qom-list: |
| # |
| # This command will list any properties of a object given a path in the object |
| # model. |
| # |
| # @path: the path within the object model. See @qom-get for a description of |
| # this parameter. |
| # |
| # Returns: a list of @ObjectPropertyInfo that describe the properties of the |
| # object. |
| # |
| # Since: 1.2 |
| ## |
| { 'command': 'qom-list', |
| 'data': { 'path': 'str' }, |
| 'returns': [ 'ObjectPropertyInfo' ] } |
| |
| ## |
| # @qom-get: |
| # |
| # This command will get a property from a object model path and return the |
| # value. |
| # |
| # @path: The path within the object model. There are two forms of supported |
| # paths--absolute and partial paths. |
| # |
| # Absolute paths are derived from the root object and can follow child<> |
| # or link<> properties. Since they can follow link<> properties, they |
| # can be arbitrarily long. Absolute paths look like absolute filenames |
| # and are prefixed with a leading slash. |
| # |
| # Partial paths look like relative filenames. They do not begin |
| # with a prefix. The matching rules for partial paths are subtle but |
| # designed to make specifying objects easy. At each level of the |
| # composition tree, the partial path is matched as an absolute path. |
| # The first match is not returned. At least two matches are searched |
| # for. A successful result is only returned if only one match is |
| # found. If more than one match is found, a flag is return to |
| # indicate that the match was ambiguous. |
| # |
| # @property: The property name to read |
| # |
| # Returns: The property value. The type depends on the property type. legacy<> |
| # properties are returned as #str. child<> and link<> properties are |
| # returns as #str pathnames. All integer property types (u8, u16, etc) |
| # are returned as #int. |
| # |
| # Since: 1.2 |
| ## |
| { 'command': 'qom-get', |
| 'data': { 'path': 'str', 'property': 'str' }, |
| 'returns': 'visitor', |
| 'gen': 'no' } |
| |
| ## |
| # @qom-set: |
| # |
| # This command will set a property from a object model path. |
| # |
| # @path: see @qom-get for a description of this parameter |
| # |
| # @property: the property name to set |
| # |
| # @value: a value who's type is appropriate for the property type. See @qom-get |
| # for a description of type mapping. |
| # |
| # Since: 1.2 |
| ## |
| { 'command': 'qom-set', |
| 'data': { 'path': 'str', 'property': 'str', 'value': 'visitor' }, |
| 'gen': 'no' } |
| |
| ## |
| # @set_password: |
| # |
| # Sets the password of a remote display session. |
| # |
| # @protocol: `vnc' to modify the VNC server password |
| # `spice' to modify the Spice server password |
| # |
| # @password: the new password |
| # |
| # @connected: #optional how to handle existing clients when changing the |
| # password. If nothing is specified, defaults to `keep' |
| # `fail' to fail the command if clients are connected |
| # `disconnect' to disconnect existing clients |
| # `keep' to maintain existing clients |
| # |
| # Returns: Nothing on success |
| # If Spice is not enabled, DeviceNotFound |
| # |
| # Since: 0.14.0 |
| ## |
| { 'command': 'set_password', |
| 'data': {'protocol': 'str', 'password': 'str', '*connected': 'str'} } |
| |
| ## |
| # @expire_password: |
| # |
| # Expire the password of a remote display server. |
| # |
| # @protocol: the name of the remote display protocol `vnc' or `spice' |
| # |
| # @time: when to expire the password. |
| # `now' to expire the password immediately |
| # `never' to cancel password expiration |
| # `+INT' where INT is the number of seconds from now (integer) |
| # `INT' where INT is the absolute time in seconds |
| # |
| # Returns: Nothing on success |
| # If @protocol is `spice' and Spice is not active, DeviceNotFound |
| # |
| # Since: 0.14.0 |
| # |
| # Notes: Time is relative to the server and currently there is no way to |
| # coordinate server time with client time. It is not recommended to |
| # use the absolute time version of the @time parameter unless you're |
| # sure you are on the same machine as the QEMU instance. |
| ## |
| { 'command': 'expire_password', 'data': {'protocol': 'str', 'time': 'str'} } |
| |
| ## |
| # @eject: |
| # |
| # Ejects a device from a removable drive. |
| # |
| # @device: The name of the device |
| # |
| # @force: @optional If true, eject regardless of whether the drive is locked. |
| # If not specified, the default value is false. |
| # |
| # Returns: Nothing on success |
| # If @device is not a valid block device, DeviceNotFound |
| # |
| # Notes: Ejecting a device will no media results in success |
| # |
| # Since: 0.14.0 |
| ## |
| { 'command': 'eject', 'data': {'device': 'str', '*force': 'bool'} } |
| |
| ## |
| # @change-vnc-password: |
| # |
| # Change the VNC server password. |
| # |
| # @target: the new password to use with VNC authentication |
| # |
| # Since: 1.1 |
| # |
| # Notes: An empty password in this command will set the password to the empty |
| # string. Existing clients are unaffected by executing this command. |
| ## |
| { 'command': 'change-vnc-password', 'data': {'password': 'str'} } |
| |
| ## |
| # @change: |
| # |
| # This command is multiple commands multiplexed together. |
| # |
| # @device: This is normally the name of a block device but it may also be 'vnc'. |
| # when it's 'vnc', then sub command depends on @target |
| # |
| # @target: If @device is a block device, then this is the new filename. |
| # If @device is 'vnc', then if the value 'password' selects the vnc |
| # change password command. Otherwise, this specifies a new server URI |
| # address to listen to for VNC connections. |
| # |
| # @arg: If @device is a block device, then this is an optional format to open |
| # the device with. |
| # If @device is 'vnc' and @target is 'password', this is the new VNC |
| # password to set. If this argument is an empty string, then no future |
| # logins will be allowed. |
| # |
| # Returns: Nothing on success. |
| # If @device is not a valid block device, DeviceNotFound |
| # If the new block device is encrypted, DeviceEncrypted. Note that |
| # if this error is returned, the device has been opened successfully |
| # and an additional call to @block_passwd is required to set the |
| # device's password. The behavior of reads and writes to the block |
| # device between when these calls are executed is undefined. |
| # |
| # Notes: It is strongly recommended that this interface is not used especially |
| # for changing block devices. |
| # |
| # Since: 0.14.0 |
| ## |
| { 'command': 'change', |
| 'data': {'device': 'str', 'target': 'str', '*arg': 'str'} } |
| |
| ## |
| # @block_set_io_throttle: |
| # |
| # Change I/O throttle limits for a block drive. |
| # |
| # @device: The name of the device |
| # |
| # @bps: total throughput limit in bytes per second |
| # |
| # @bps_rd: read throughput limit in bytes per second |
| # |
| # @bps_wr: write throughput limit in bytes per second |
| # |
| # @iops: total I/O operations per second |
| # |
| # @ops_rd: read I/O operations per second |
| # |
| # @iops_wr: write I/O operations per second |
| # |
| # @bps_max: #optional total max in bytes (Since 1.7) |
| # |
| # @bps_rd_max: #optional read max in bytes (Since 1.7) |
| # |
| # @bps_wr_max: #optional write max in bytes (Since 1.7) |
| # |
| # @iops_max: #optional total I/O operations max (Since 1.7) |
| # |
| # @iops_rd_max: #optional read I/O operations max (Since 1.7) |
| # |
| # @iops_wr_max: #optional write I/O operations max (Since 1.7) |
| # |
| # @iops_size: #optional an I/O size in bytes (Since 1.7) |
| # |
| # Returns: Nothing on success |
| # If @device is not a valid block device, DeviceNotFound |
| # |
| # Since: 1.1 |
| ## |
| { 'command': 'block_set_io_throttle', |
| 'data': { 'device': 'str', 'bps': 'int', 'bps_rd': 'int', 'bps_wr': 'int', |
| 'iops': 'int', 'iops_rd': 'int', 'iops_wr': 'int', |
| '*bps_max': 'int', '*bps_rd_max': 'int', |
| '*bps_wr_max': 'int', '*iops_max': 'int', |
| '*iops_rd_max': 'int', '*iops_wr_max': 'int', |
| '*iops_size': 'int' } } |
| |
| ## |
| # @block-stream: |
| # |
| # Copy data from a backing file into a block device. |
| # |
| # The block streaming operation is performed in the background until the entire |
| # backing file has been copied. This command returns immediately once streaming |
| # has started. The status of ongoing block streaming operations can be checked |
| # with query-block-jobs. The operation can be stopped before it has completed |
| # using the block-job-cancel command. |
| # |
| # If a base file is specified then sectors are not copied from that base file and |
| # its backing chain. When streaming completes the image file will have the base |
| # file as its backing file. This can be used to stream a subset of the backing |
| # file chain instead of flattening the entire image. |
| # |
| # On successful completion the image file is updated to drop the backing file |
| # and the BLOCK_JOB_COMPLETED event is emitted. |
| # |
| # @device: the device name |
| # |
| # @base: #optional the common backing file name |
| # |
| # @speed: #optional the maximum speed, in bytes per second |
| # |
| # @on-error: #optional the action to take on an error (default report). |
| # 'stop' and 'enospc' can only be used if the block device |
| # supports io-status (see BlockInfo). Since 1.3. |
| # |
| # Returns: Nothing on success |
| # If @device does not exist, DeviceNotFound |
| # |
| # Since: 1.1 |
| ## |
| { 'command': 'block-stream', |
| 'data': { 'device': 'str', '*base': 'str', '*speed': 'int', |
| '*on-error': 'BlockdevOnError' } } |
| |
| ## |
| # @block-job-set-speed: |
| # |
| # Set maximum speed for a background block operation. |
| # |
| # This command can only be issued when there is an active block job. |
| # |
| # Throttling can be disabled by setting the speed to 0. |
| # |
| # @device: the device name |
| # |
| # @speed: the maximum speed, in bytes per second, or 0 for unlimited. |
| # Defaults to 0. |
| # |
| # Returns: Nothing on success |
| # If no background operation is active on this device, DeviceNotActive |
| # |
| # Since: 1.1 |
| ## |
| { 'command': 'block-job-set-speed', |
| 'data': { 'device': 'str', 'speed': 'int' } } |
| |
| ## |
| # @block-job-cancel: |
| # |
| # Stop an active background block operation. |
| # |
| # This command returns immediately after marking the active background block |
| # operation for cancellation. It is an error to call this command if no |
| # operation is in progress. |
| # |
| # The operation will cancel as soon as possible and then emit the |
| # BLOCK_JOB_CANCELLED event. Before that happens the job is still visible when |
| # enumerated using query-block-jobs. |
| # |
| # For streaming, the image file retains its backing file unless the streaming |
| # operation happens to complete just as it is being cancelled. A new streaming |
| # operation can be started at a later time to finish copying all data from the |
| # backing file. |
| # |
| # @device: the device name |
| # |
| # @force: #optional whether to allow cancellation of a paused job (default |
| # false). Since 1.3. |
| # |
| # Returns: Nothing on success |
| # If no background operation is active on this device, DeviceNotActive |
| # |
| # Since: 1.1 |
| ## |
| { 'command': 'block-job-cancel', 'data': { 'device': 'str', '*force': 'bool' } } |
| |
| ## |
| # @block-job-pause: |
| # |
| # Pause an active background block operation. |
| # |
| # This command returns immediately after marking the active background block |
| # operation for pausing. It is an error to call this command if no |
| # operation is in progress. Pausing an already paused job has no cumulative |
| # effect; a single block-job-resume command will resume the job. |
| # |
| # The operation will pause as soon as possible. No event is emitted when |
| # the operation is actually paused. Cancelling a paused job automatically |
| # resumes it. |
| # |
| # @device: the device name |
| # |
| # Returns: Nothing on success |
| # If no background operation is active on this device, DeviceNotActive |
| # |
| # Since: 1.3 |
| ## |
| { 'command': 'block-job-pause', 'data': { 'device': 'str' } } |
| |
| ## |
| # @block-job-resume: |
| # |
| # Resume an active background block operation. |
| # |
| # This command returns immediately after resuming a paused background block |
| # operation. It is an error to call this command if no operation is in |
| # progress. Resuming an already running job is not an error. |
| # |
| # This command also clears the error status of the job. |
| # |
| # @device: the device name |
| # |
| # Returns: Nothing on success |
| # If no background operation is active on this device, DeviceNotActive |
| # |
| # Since: 1.3 |
| ## |
| { 'command': 'block-job-resume', 'data': { 'device': 'str' } } |
| |
| ## |
| # @block-job-complete: |
| # |
| # Manually trigger completion of an active background block operation. This |
| # is supported for drive mirroring, where it also switches the device to |
| # write to the target path only. The ability to complete is signaled with |
| # a BLOCK_JOB_READY event. |
| # |
| # This command completes an active background block operation synchronously. |
| # The ordering of this command's return with the BLOCK_JOB_COMPLETED event |
| # is not defined. Note that if an I/O error occurs during the processing of |
| # this command: 1) the command itself will fail; 2) the error will be processed |
| # according to the rerror/werror arguments that were specified when starting |
| # the operation. |
| # |
| # A cancelled or paused job cannot be completed. |
| # |
| # @device: the device name |
| # |
| # Returns: Nothing on success |
| # If no background operation is active on this device, DeviceNotActive |
| # |
| # Since: 1.3 |
| ## |
| { 'command': 'block-job-complete', 'data': { 'device': 'str' } } |
| |
| ## |
| # @ObjectTypeInfo: |
| # |
| # This structure describes a search result from @qom-list-types |
| # |
| # @name: the type name found in the search |
| # |
| # Since: 1.1 |
| # |
| # Notes: This command is experimental and may change syntax in future releases. |
| ## |
| { 'type': 'ObjectTypeInfo', |
| 'data': { 'name': 'str' } } |
| |
| ## |
| # @qom-list-types: |
| # |
| # This command will return a list of types given search parameters |
| # |
| # @implements: if specified, only return types that implement this type name |
| # |
| # @abstract: if true, include abstract types in the results |
| # |
| # Returns: a list of @ObjectTypeInfo or an empty list if no results are found |
| # |
| # Since: 1.1 |
| ## |
| { 'command': 'qom-list-types', |
| 'data': { '*implements': 'str', '*abstract': 'bool' }, |
| 'returns': [ 'ObjectTypeInfo' ] } |
| |
| ## |
| # @DevicePropertyInfo: |
| # |
| # Information about device properties. |
| # |
| # @name: the name of the property |
| # @type: the typename of the property |
| # |
| # Since: 1.2 |
| ## |
| { 'type': 'DevicePropertyInfo', |
| 'data': { 'name': 'str', 'type': 'str' } } |
| |
| ## |
| # @device-list-properties: |
| # |
| # List properties associated with a device. |
| # |
| # @typename: the type name of a device |
| # |
| # Returns: a list of DevicePropertyInfo describing a devices properties |
| # |
| # Since: 1.2 |
| ## |
| { 'command': 'device-list-properties', |
| 'data': { 'typename': 'str'}, |
| 'returns': [ 'DevicePropertyInfo' ] } |
| |
| ## |
| # @migrate |
| # |
| # Migrates the current running guest to another Virtual Machine. |
| # |
| # @uri: the Uniform Resource Identifier of the destination VM |
| # |
| # @blk: #optional do block migration (full disk copy) |
| # |
| # @inc: #optional incremental disk copy migration |
| # |
| # @detach: this argument exists only for compatibility reasons and |
| # is ignored by QEMU |
| # |
| # Returns: nothing on success |
| # |
| # Since: 0.14.0 |
| ## |
| { 'command': 'migrate', |
| 'data': {'uri': 'str', '*blk': 'bool', '*inc': 'bool', '*detach': 'bool' } } |
| |
| # @xen-save-devices-state: |
| # |
| # Save the state of all devices to file. The RAM and the block devices |
| # of the VM are not saved by this command. |
| # |
| # @filename: the file to save the state of the devices to as binary |
| # data. See xen-save-devices-state.txt for a description of the binary |
| # format. |
| # |
| # Returns: Nothing on success |
| # |
| # Since: 1.1 |
| ## |
| { 'command': 'xen-save-devices-state', 'data': {'filename': 'str'} } |
| |
| ## |
| # @xen-set-global-dirty-log |
| # |
| # Enable or disable the global dirty log mode. |
| # |
| # @enable: true to enable, false to disable. |
| # |
| # Returns: nothing |
| # |
| # Since: 1.3 |
| ## |
| { 'command': 'xen-set-global-dirty-log', 'data': { 'enable': 'bool' } } |
| |
| ## |
| # @device_del: |
| # |
| # Remove a device from a guest |
| # |
| # @id: the name of the device |
| # |
| # Returns: Nothing on success |
| # If @id is not a valid device, DeviceNotFound |
| # |
| # Notes: When this command completes, the device may not be removed from the |
| # guest. Hot removal is an operation that requires guest cooperation. |
| # This command merely requests that the guest begin the hot removal |
| # process. Completion of the device removal process is signaled with a |
| # DEVICE_DELETED event. Guest reset will automatically complete removal |
| # for all devices. |
| # |
| # Since: 0.14.0 |
| ## |
| { 'command': 'device_del', 'data': {'id': 'str'} } |
| |
| ## |
| # @DumpGuestMemoryFormat: |
| # |
| # An enumeration of guest-memory-dump's format. |
| # |
| # @elf: elf format |
| # |
| # @kdump-zlib: kdump-compressed format with zlib-compressed |
| # |
| # @kdump-lzo: kdump-compressed format with lzo-compressed |
| # |
| # @kdump-snappy: kdump-compressed format with snappy-compressed |
| # |
| # Since: 2.0 |
| ## |
| { 'enum': 'DumpGuestMemoryFormat', |
| 'data': [ 'elf', 'kdump-zlib', 'kdump-lzo', 'kdump-snappy' ] } |
| |
| ## |
| # @dump-guest-memory |
| # |
| # Dump guest's memory to vmcore. It is a synchronous operation that can take |
| # very long depending on the amount of guest memory. This command is only |
| # supported on i386 and x86_64. |
| # |
| # @paging: if true, do paging to get guest's memory mapping. This allows |
| # using gdb to process the core file. |
| # |
| # IMPORTANT: this option can make QEMU allocate several gigabytes |
| # of RAM. This can happen for a large guest, or a |
| # malicious guest pretending to be large. |
| # |
| # Also, paging=true has the following limitations: |
| # |
| # 1. The guest may be in a catastrophic state or can have corrupted |
| # memory, which cannot be trusted |
| # 2. The guest can be in real-mode even if paging is enabled. For |
| # example, the guest uses ACPI to sleep, and ACPI sleep state |
| # goes in real-mode |
| # |
| # @protocol: the filename or file descriptor of the vmcore. The supported |
| # protocols are: |
| # |
| # 1. file: the protocol starts with "file:", and the following |
| # string is the file's path. |
| # 2. fd: the protocol starts with "fd:", and the following string |
| # is the fd's name. |
| # |
| # @begin: #optional if specified, the starting physical address. |
| # |
| # @length: #optional if specified, the memory size, in bytes. If you don't |
| # want to dump all guest's memory, please specify the start @begin |
| # and @length |
| # |
| # @format: #optional if specified, the format of guest memory dump. But non-elf |
| # format is conflict with paging and filter, ie. @paging, @begin and |
| # @length is not allowed to be specified with non-elf @format at the |
| # same time (since 2.0) |
| # |
| # Returns: nothing on success |
| # |
| # Since: 1.2 |
| ## |
| { 'command': 'dump-guest-memory', |
| 'data': { 'paging': 'bool', 'protocol': 'str', '*begin': 'int', |
| '*length': 'int', '*format': 'DumpGuestMemoryFormat' } } |
| |
| ## |
| # @DumpGuestMemoryCapability: |
| # |
| # A list of the available formats for dump-guest-memory |
| # |
| # Since: 2.0 |
| ## |
| { 'type': 'DumpGuestMemoryCapability', |
| 'data': { |
| 'formats': ['DumpGuestMemoryFormat'] } } |
| |
| ## |
| # @query-dump-guest-memory-capability: |
| # |
| # Returns the available formats for dump-guest-memory |
| # |
| # Returns: A @DumpGuestMemoryCapability object listing available formats for |
| # dump-guest-memory |
| # |
| # Since: 2.0 |
| ## |
| { 'command': 'query-dump-guest-memory-capability', |
| 'returns': 'DumpGuestMemoryCapability' } |
| |
| ## |
| # @netdev_add: |
| # |
| # Add a network backend. |
| # |
| # @type: the type of network backend. Current valid values are 'user', 'tap', |
| # 'vde', 'socket', 'dump' and 'bridge' |
| # |
| # @id: the name of the new network backend |
| # |
| # @props: #optional a list of properties to be passed to the backend in |
| # the format 'name=value', like 'ifname=tap0,script=no' |
| # |
| # Notes: The semantics of @props is not well defined. Future commands will be |
| # introduced that provide stronger typing for backend creation. |
| # |
| # Since: 0.14.0 |
| # |
| # Returns: Nothing on success |
| # If @type is not a valid network backend, DeviceNotFound |
| ## |
| { 'command': 'netdev_add', |
| 'data': {'type': 'str', 'id': 'str', '*props': '**'}, |
| 'gen': 'no' } |
| |
| ## |
| # @netdev_del: |
| # |
| # Remove a network backend. |
| # |
| # @id: the name of the network backend to remove |
| # |
| # Returns: Nothing on success |
| # If @id is not a valid network backend, DeviceNotFound |
| # |
| # Since: 0.14.0 |
| ## |
| { 'command': 'netdev_del', 'data': {'id': 'str'} } |
| |
| ## |
| # @object-add: |
| # |
| # Create a QOM object. |
| # |
| # @qom-type: the class name for the object to be created |
| # |
| # @id: the name of the new object |
| # |
| # @props: #optional a dictionary of properties to be passed to the backend |
| # |
| # Returns: Nothing on success |
| # Error if @qom-type is not a valid class name |
| # |
| # Since: 2.0 |
| ## |
| { 'command': 'object-add', |
| 'data': {'qom-type': 'str', 'id': 'str', '*props': 'dict'}, |
| 'gen': 'no' } |
| |
| ## |
| # @object-del: |
| # |
| # Remove a QOM object. |
| # |
| # @id: the name of the QOM object to remove |
| # |
| # Returns: Nothing on success |
| # Error if @id is not a valid id for a QOM object |
| # |
| # Since: 2.0 |
| ## |
| { 'command': 'object-del', 'data': {'id': 'str'} } |
| |
| ## |
| # @NetdevNoneOptions |
| # |
| # Use it alone to have zero network devices. |
| # |
| # Since 1.2 |
| ## |
| { 'type': 'NetdevNoneOptions', |
| 'data': { } } |
| |
| ## |
| # @NetLegacyNicOptions |
| # |
| # Create a new Network Interface Card. |
| # |
| # @netdev: #optional id of -netdev to connect to |
| # |
| # @macaddr: #optional MAC address |
| # |
| # @model: #optional device model (e1000, rtl8139, virtio etc.) |
| # |
| # @addr: #optional PCI device address |
| # |
| # @vectors: #optional number of MSI-x vectors, 0 to disable MSI-X |
| # |
| # Since 1.2 |
| ## |
| { 'type': 'NetLegacyNicOptions', |
| 'data': { |
| '*netdev': 'str', |
| '*macaddr': 'str', |
| '*model': 'str', |
| '*addr': 'str', |
| '*vectors': 'uint32' } } |
| |
| ## |
| # @String |
| # |
| # A fat type wrapping 'str', to be embedded in lists. |
|