hw/misc/aspeed_scu.c - qemu-android - Git at Google

 /*
  * ASPEED System Control Unit
  *
  * Andrew Jeffery <andrew@aj.id.au>
  *
  * Copyright 2016 IBM Corp.
  *
  * This code is licensed under the GPL version 2 or later.  See
  * the COPYING file in the top-level directory.
  */

 #include "qemu/osdep.h"
 #include "hw/misc/aspeed_scu.h"
 #include "hw/qdev-properties.h"
 #include "qapi/error.h"
 #include "qapi/visitor.h"
 #include "qemu/bitops.h"
 #include "qemu/log.h"
 #include "trace.h"

 #define TO_REG(offset) ((offset) >> 2)

 #define PROT_KEY             TO_REG(0x00)
 #define SYS_RST_CTRL         TO_REG(0x04)
 #define CLK_SEL              TO_REG(0x08)
 #define CLK_STOP_CTRL        TO_REG(0x0C)
 #define FREQ_CNTR_CTRL       TO_REG(0x10)
 #define FREQ_CNTR_EVAL       TO_REG(0x14)
 #define IRQ_CTRL             TO_REG(0x18)
 #define D2PLL_PARAM          TO_REG(0x1C)
 #define MPLL_PARAM           TO_REG(0x20)
 #define HPLL_PARAM           TO_REG(0x24)
 #define FREQ_CNTR_RANGE      TO_REG(0x28)
 #define MISC_CTRL1           TO_REG(0x2C)
 #define PCI_CTRL1            TO_REG(0x30)
 #define PCI_CTRL2            TO_REG(0x34)
 #define PCI_CTRL3            TO_REG(0x38)
 #define SYS_RST_STATUS       TO_REG(0x3C)
 #define SOC_SCRATCH1         TO_REG(0x40)
 #define SOC_SCRATCH2         TO_REG(0x44)
 #define MAC_CLK_DELAY        TO_REG(0x48)
 #define MISC_CTRL2           TO_REG(0x4C)
 #define VGA_SCRATCH1         TO_REG(0x50)
 #define VGA_SCRATCH2         TO_REG(0x54)
 #define VGA_SCRATCH3         TO_REG(0x58)
 #define VGA_SCRATCH4         TO_REG(0x5C)
 #define VGA_SCRATCH5         TO_REG(0x60)
 #define VGA_SCRATCH6         TO_REG(0x64)
 #define VGA_SCRATCH7         TO_REG(0x68)
 #define VGA_SCRATCH8         TO_REG(0x6C)
 #define HW_STRAP1            TO_REG(0x70)
 #define RNG_CTRL             TO_REG(0x74)
 #define RNG_DATA             TO_REG(0x78)
 #define SILICON_REV          TO_REG(0x7C)
 #define PINMUX_CTRL1         TO_REG(0x80)
 #define PINMUX_CTRL2         TO_REG(0x84)
 #define PINMUX_CTRL3         TO_REG(0x88)
 #define PINMUX_CTRL4         TO_REG(0x8C)
 #define PINMUX_CTRL5         TO_REG(0x90)
 #define PINMUX_CTRL6         TO_REG(0x94)
 #define WDT_RST_CTRL         TO_REG(0x9C)
 #define PINMUX_CTRL7         TO_REG(0xA0)
 #define PINMUX_CTRL8         TO_REG(0xA4)
 #define PINMUX_CTRL9         TO_REG(0xA8)
 #define WAKEUP_EN            TO_REG(0xC0)
 #define WAKEUP_CTRL          TO_REG(0xC4)
 #define HW_STRAP2            TO_REG(0xD0)
 #define FREE_CNTR4           TO_REG(0xE0)
 #define FREE_CNTR4_EXT       TO_REG(0xE4)
 #define CPU2_CTRL            TO_REG(0x100)
 #define CPU2_BASE_SEG1       TO_REG(0x104)
 #define CPU2_BASE_SEG2       TO_REG(0x108)
 #define CPU2_BASE_SEG3       TO_REG(0x10C)
 #define CPU2_BASE_SEG4       TO_REG(0x110)
 #define CPU2_BASE_SEG5       TO_REG(0x114)
 #define CPU2_CACHE_CTRL      TO_REG(0x118)
 #define UART_HPLL_CLK        TO_REG(0x160)
 #define PCIE_CTRL            TO_REG(0x180)
 #define BMC_MMIO_CTRL        TO_REG(0x184)
 #define RELOC_DECODE_BASE1   TO_REG(0x188)
 #define RELOC_DECODE_BASE2   TO_REG(0x18C)
 #define MAILBOX_DECODE_BASE  TO_REG(0x190)
 #define SRAM_DECODE_BASE1    TO_REG(0x194)
 #define SRAM_DECODE_BASE2    TO_REG(0x198)
 #define BMC_REV              TO_REG(0x19C)
 #define BMC_DEV_ID           TO_REG(0x1A4)

 #define PROT_KEY_UNLOCK 0x1688A8A8
 #define SCU_IO_REGION_SIZE 0x20000

 static const uint32_t ast2400_a0_resets[ASPEED_SCU_NR_REGS] = {
      [SYS_RST_CTRL]    = 0xFFCFFEDCU,
      [CLK_SEL]         = 0xF3F40000U,
      [CLK_STOP_CTRL]   = 0x19FC3E8BU,
      [D2PLL_PARAM]     = 0x00026108U,
      [MPLL_PARAM]      = 0x00030291U,
      [HPLL_PARAM]      = 0x00000291U,
      [MISC_CTRL1]      = 0x00000010U,
      [PCI_CTRL1]       = 0x20001A03U,
      [PCI_CTRL2]       = 0x20001A03U,
      [PCI_CTRL3]       = 0x04000030U,
      [SYS_RST_STATUS]  = 0x00000001U,
      [SOC_SCRATCH1]    = 0x000000C0U, /* SoC completed DRAM init */
      [MISC_CTRL2]      = 0x00000023U,
      [RNG_CTRL]        = 0x0000000EU,
      [PINMUX_CTRL2]    = 0x0000F000U,
      [PINMUX_CTRL3]    = 0x01000000U,
      [PINMUX_CTRL4]    = 0x000000FFU,
      [PINMUX_CTRL5]    = 0x0000A000U,
      [WDT_RST_CTRL]    = 0x003FFFF3U,
      [PINMUX_CTRL8]    = 0xFFFF0000U,
      [PINMUX_CTRL9]    = 0x000FFFFFU,
      [FREE_CNTR4]      = 0x000000FFU,
      [FREE_CNTR4_EXT]  = 0x000000FFU,
      [CPU2_BASE_SEG1]  = 0x80000000U,
      [CPU2_BASE_SEG4]  = 0x1E600000U,
      [CPU2_BASE_SEG5]  = 0xC0000000U,
      [UART_HPLL_CLK]   = 0x00001903U,
      [PCIE_CTRL]       = 0x0000007BU,
      [BMC_DEV_ID]      = 0x00002402U
 };

 static uint64_t aspeed_scu_read(void *opaque, hwaddr offset, unsigned size)
 {
     AspeedSCUState *s = ASPEED_SCU(opaque);
     int reg = TO_REG(offset);

     if (reg >= ARRAY_SIZE(s->regs)) {
         qemu_log_mask(LOG_GUEST_ERROR,
                       "%s: Out-of-bounds read at offset 0x%" HWADDR_PRIx "\n",
                       __func__, offset);
         return 0;
     }

     switch (reg) {
     case WAKEUP_EN:
         qemu_log_mask(LOG_GUEST_ERROR,
                       "%s: Read of write-only offset 0x%" HWADDR_PRIx "\n",
                       __func__, offset);
         break;
     }

     return s->regs[reg];
 }

 static void aspeed_scu_write(void *opaque, hwaddr offset, uint64_t data,
                              unsigned size)
 {
     AspeedSCUState *s = ASPEED_SCU(opaque);
     int reg = TO_REG(offset);

     if (reg >= ARRAY_SIZE(s->regs)) {
         qemu_log_mask(LOG_GUEST_ERROR,
                       "%s: Out-of-bounds write at offset 0x%" HWADDR_PRIx "\n",
                       __func__, offset);
         return;
     }

     if (reg > PROT_KEY && reg < CPU2_BASE_SEG1 &&
             s->regs[PROT_KEY] != PROT_KEY_UNLOCK) {
         qemu_log_mask(LOG_GUEST_ERROR, "%s: SCU is locked!\n", __func__);
         return;
     }

     trace_aspeed_scu_write(offset, size, data);

     switch (reg) {
     case FREQ_CNTR_EVAL:
     case VGA_SCRATCH1 ... VGA_SCRATCH8:
     case RNG_DATA:
     case SILICON_REV:
     case FREE_CNTR4:
     case FREE_CNTR4_EXT:
         qemu_log_mask(LOG_GUEST_ERROR,
                       "%s: Write to read-only offset 0x%" HWADDR_PRIx "\n",
                       __func__, offset);
         return;
     }

     s->regs[reg] = data;
 }

 static const MemoryRegionOps aspeed_scu_ops = {
     .read = aspeed_scu_read,
     .write = aspeed_scu_write,
     .endianness = DEVICE_LITTLE_ENDIAN,
     .valid.min_access_size = 4,
     .valid.max_access_size = 4,
     .valid.unaligned = false,
 };

 static void aspeed_scu_reset(DeviceState *dev)
 {
     AspeedSCUState *s = ASPEED_SCU(dev);
     const uint32_t *reset;

     switch (s->silicon_rev) {
     case AST2400_A0_SILICON_REV:
         reset = ast2400_a0_resets;
         break;
     default:
         g_assert_not_reached();
     }

     memcpy(s->regs, reset, sizeof(s->regs));
     s->regs[SILICON_REV] = s->silicon_rev;
     s->regs[HW_STRAP1] = s->hw_strap1;
     s->regs[HW_STRAP2] = s->hw_strap2;
 }

 static uint32_t aspeed_silicon_revs[] = { AST2400_A0_SILICON_REV, };

 bool is_supported_silicon_rev(uint32_t silicon_rev)
 {
     int i;

     for (i = 0; i < ARRAY_SIZE(aspeed_silicon_revs); i++) {
         if (silicon_rev == aspeed_silicon_revs[i]) {
             return true;
         }
     }

     return false;
 }

 static void aspeed_scu_realize(DeviceState *dev, Error **errp)
 {
     SysBusDevice *sbd = SYS_BUS_DEVICE(dev);
     AspeedSCUState *s = ASPEED_SCU(dev);

     if (!is_supported_silicon_rev(s->silicon_rev)) {
         error_setg(errp, "Unknown silicon revision: 0x%" PRIx32,
                 s->silicon_rev);
         return;
     }

     memory_region_init_io(&s->iomem, OBJECT(s), &aspeed_scu_ops, s,
                           TYPE_ASPEED_SCU, SCU_IO_REGION_SIZE);

     sysbus_init_mmio(sbd, &s->iomem);
 }

 static const VMStateDescription vmstate_aspeed_scu = {
     .name = "aspeed.scu",
     .version_id = 1,
     .minimum_version_id = 1,
     .fields = (VMStateField[]) {
         VMSTATE_UINT32_ARRAY(regs, AspeedSCUState, ASPEED_SCU_NR_REGS),
         VMSTATE_END_OF_LIST()
     }
 };

 static Property aspeed_scu_properties[] = {
     DEFINE_PROP_UINT32("silicon-rev", AspeedSCUState, silicon_rev, 0),
     DEFINE_PROP_UINT32("hw-strap1", AspeedSCUState, hw_strap1, 0),
     DEFINE_PROP_UINT32("hw-strap2", AspeedSCUState, hw_strap2, 0),
     DEFINE_PROP_END_OF_LIST(),
 };

 static void aspeed_scu_class_init(ObjectClass *klass, void *data)
 {
     DeviceClass *dc = DEVICE_CLASS(klass);
     dc->realize = aspeed_scu_realize;
     dc->reset = aspeed_scu_reset;
     dc->desc = "ASPEED System Control Unit";
     dc->vmsd = &vmstate_aspeed_scu;
     dc->props = aspeed_scu_properties;
 }

 static const TypeInfo aspeed_scu_info = {
     .name = TYPE_ASPEED_SCU,
     .parent = TYPE_SYS_BUS_DEVICE,
     .instance_size = sizeof(AspeedSCUState),
     .class_init = aspeed_scu_class_init,
 };

 static void aspeed_scu_register_types(void)
 {
     type_register_static(&aspeed_scu_info);
 }

 type_init(aspeed_scu_register_types);
	/*
	* ASPEED System Control Unit
	*
	* Andrew Jeffery <andrew@aj.id.au>
	*
	* Copyright 2016 IBM Corp.
	*
	* This code is licensed under the GPL version 2 or later. See
	* the COPYING file in the top-level directory.
	*/

	#include "qemu/osdep.h"
	#include "hw/misc/aspeed_scu.h"
	#include "hw/qdev-properties.h"
	#include "qapi/error.h"
	#include "qapi/visitor.h"
	#include "qemu/bitops.h"
	#include "qemu/log.h"
	#include "trace.h"

	#define TO_REG(offset) ((offset) >> 2)

	#define PROT_KEY TO_REG(0x00)
	#define SYS_RST_CTRL TO_REG(0x04)
	#define CLK_SEL TO_REG(0x08)
	#define CLK_STOP_CTRL TO_REG(0x0C)
	#define FREQ_CNTR_CTRL TO_REG(0x10)
	#define FREQ_CNTR_EVAL TO_REG(0x14)
	#define IRQ_CTRL TO_REG(0x18)
	#define D2PLL_PARAM TO_REG(0x1C)
	#define MPLL_PARAM TO_REG(0x20)
	#define HPLL_PARAM TO_REG(0x24)
	#define FREQ_CNTR_RANGE TO_REG(0x28)
	#define MISC_CTRL1 TO_REG(0x2C)
	#define PCI_CTRL1 TO_REG(0x30)
	#define PCI_CTRL2 TO_REG(0x34)
	#define PCI_CTRL3 TO_REG(0x38)
	#define SYS_RST_STATUS TO_REG(0x3C)
	#define SOC_SCRATCH1 TO_REG(0x40)
	#define SOC_SCRATCH2 TO_REG(0x44)
	#define MAC_CLK_DELAY TO_REG(0x48)
	#define MISC_CTRL2 TO_REG(0x4C)
	#define VGA_SCRATCH1 TO_REG(0x50)
	#define VGA_SCRATCH2 TO_REG(0x54)
	#define VGA_SCRATCH3 TO_REG(0x58)
	#define VGA_SCRATCH4 TO_REG(0x5C)
	#define VGA_SCRATCH5 TO_REG(0x60)
	#define VGA_SCRATCH6 TO_REG(0x64)
	#define VGA_SCRATCH7 TO_REG(0x68)
	#define VGA_SCRATCH8 TO_REG(0x6C)
	#define HW_STRAP1 TO_REG(0x70)
	#define RNG_CTRL TO_REG(0x74)
	#define RNG_DATA TO_REG(0x78)
	#define SILICON_REV TO_REG(0x7C)
	#define PINMUX_CTRL1 TO_REG(0x80)
	#define PINMUX_CTRL2 TO_REG(0x84)
	#define PINMUX_CTRL3 TO_REG(0x88)
	#define PINMUX_CTRL4 TO_REG(0x8C)
	#define PINMUX_CTRL5 TO_REG(0x90)
	#define PINMUX_CTRL6 TO_REG(0x94)
	#define WDT_RST_CTRL TO_REG(0x9C)
	#define PINMUX_CTRL7 TO_REG(0xA0)
	#define PINMUX_CTRL8 TO_REG(0xA4)
	#define PINMUX_CTRL9 TO_REG(0xA8)
	#define WAKEUP_EN TO_REG(0xC0)
	#define WAKEUP_CTRL TO_REG(0xC4)
	#define HW_STRAP2 TO_REG(0xD0)
	#define FREE_CNTR4 TO_REG(0xE0)
	#define FREE_CNTR4_EXT TO_REG(0xE4)
	#define CPU2_CTRL TO_REG(0x100)
	#define CPU2_BASE_SEG1 TO_REG(0x104)
	#define CPU2_BASE_SEG2 TO_REG(0x108)
	#define CPU2_BASE_SEG3 TO_REG(0x10C)
	#define CPU2_BASE_SEG4 TO_REG(0x110)
	#define CPU2_BASE_SEG5 TO_REG(0x114)
	#define CPU2_CACHE_CTRL TO_REG(0x118)
	#define UART_HPLL_CLK TO_REG(0x160)
	#define PCIE_CTRL TO_REG(0x180)
	#define BMC_MMIO_CTRL TO_REG(0x184)
	#define RELOC_DECODE_BASE1 TO_REG(0x188)
	#define RELOC_DECODE_BASE2 TO_REG(0x18C)
	#define MAILBOX_DECODE_BASE TO_REG(0x190)
	#define SRAM_DECODE_BASE1 TO_REG(0x194)
	#define SRAM_DECODE_BASE2 TO_REG(0x198)
	#define BMC_REV TO_REG(0x19C)
	#define BMC_DEV_ID TO_REG(0x1A4)

	#define PROT_KEY_UNLOCK 0x1688A8A8
	#define SCU_IO_REGION_SIZE 0x20000

	static const uint32_t ast2400_a0_resets[ASPEED_SCU_NR_REGS] = {
	[SYS_RST_CTRL] = 0xFFCFFEDCU,
	[CLK_SEL] = 0xF3F40000U,
	[CLK_STOP_CTRL] = 0x19FC3E8BU,
	[D2PLL_PARAM] = 0x00026108U,
	[MPLL_PARAM] = 0x00030291U,
	[HPLL_PARAM] = 0x00000291U,
	[MISC_CTRL1] = 0x00000010U,
	[PCI_CTRL1] = 0x20001A03U,
	[PCI_CTRL2] = 0x20001A03U,
	[PCI_CTRL3] = 0x04000030U,
	[SYS_RST_STATUS] = 0x00000001U,
	[SOC_SCRATCH1] = 0x000000C0U, /* SoC completed DRAM init */
	[MISC_CTRL2] = 0x00000023U,
	[RNG_CTRL] = 0x0000000EU,
	[PINMUX_CTRL2] = 0x0000F000U,
	[PINMUX_CTRL3] = 0x01000000U,
	[PINMUX_CTRL4] = 0x000000FFU,
	[PINMUX_CTRL5] = 0x0000A000U,
	[WDT_RST_CTRL] = 0x003FFFF3U,
	[PINMUX_CTRL8] = 0xFFFF0000U,
	[PINMUX_CTRL9] = 0x000FFFFFU,
	[FREE_CNTR4] = 0x000000FFU,
	[FREE_CNTR4_EXT] = 0x000000FFU,
	[CPU2_BASE_SEG1] = 0x80000000U,
	[CPU2_BASE_SEG4] = 0x1E600000U,
	[CPU2_BASE_SEG5] = 0xC0000000U,
	[UART_HPLL_CLK] = 0x00001903U,
	[PCIE_CTRL] = 0x0000007BU,
	[BMC_DEV_ID] = 0x00002402U
	};

	static uint64_t aspeed_scu_read(void *opaque, hwaddr offset, unsigned size)
	{
	AspeedSCUState *s = ASPEED_SCU(opaque);
	int reg = TO_REG(offset);

	if (reg >= ARRAY_SIZE(s->regs)) {
	qemu_log_mask(LOG_GUEST_ERROR,
	"%s: Out-of-bounds read at offset 0x%" HWADDR_PRIx "\n",
	__func__, offset);
	return 0;
	}

	switch (reg) {
	case WAKEUP_EN:
	qemu_log_mask(LOG_GUEST_ERROR,
	"%s: Read of write-only offset 0x%" HWADDR_PRIx "\n",
	__func__, offset);
	break;
	}

	return s->regs[reg];
	}

	static void aspeed_scu_write(void *opaque, hwaddr offset, uint64_t data,
	unsigned size)
	{
	AspeedSCUState *s = ASPEED_SCU(opaque);
	int reg = TO_REG(offset);

	if (reg >= ARRAY_SIZE(s->regs)) {
	qemu_log_mask(LOG_GUEST_ERROR,
	"%s: Out-of-bounds write at offset 0x%" HWADDR_PRIx "\n",
	__func__, offset);
	return;
	}

	if (reg > PROT_KEY && reg < CPU2_BASE_SEG1 &&
	s->regs[PROT_KEY] != PROT_KEY_UNLOCK) {
	qemu_log_mask(LOG_GUEST_ERROR, "%s: SCU is locked!\n", __func__);
	return;
	}

	trace_aspeed_scu_write(offset, size, data);

	switch (reg) {
	case FREQ_CNTR_EVAL:
	case VGA_SCRATCH1 ... VGA_SCRATCH8:
	case RNG_DATA:
	case SILICON_REV:
	case FREE_CNTR4:
	case FREE_CNTR4_EXT:
	qemu_log_mask(LOG_GUEST_ERROR,
	"%s: Write to read-only offset 0x%" HWADDR_PRIx "\n",
	__func__, offset);
	return;
	}

	s->regs[reg] = data;
	}

	static const MemoryRegionOps aspeed_scu_ops = {
	.read = aspeed_scu_read,
	.write = aspeed_scu_write,
	.endianness = DEVICE_LITTLE_ENDIAN,
	.valid.min_access_size = 4,
	.valid.max_access_size = 4,
	.valid.unaligned = false,
	};

	static void aspeed_scu_reset(DeviceState *dev)
	{
	AspeedSCUState *s = ASPEED_SCU(dev);
	const uint32_t *reset;

	switch (s->silicon_rev) {
	case AST2400_A0_SILICON_REV:
	reset = ast2400_a0_resets;
	break;
	default:
	g_assert_not_reached();
	}

	memcpy(s->regs, reset, sizeof(s->regs));
	s->regs[SILICON_REV] = s->silicon_rev;
	s->regs[HW_STRAP1] = s->hw_strap1;
	s->regs[HW_STRAP2] = s->hw_strap2;
	}

	static uint32_t aspeed_silicon_revs[] = { AST2400_A0_SILICON_REV, };

	bool is_supported_silicon_rev(uint32_t silicon_rev)
	{
	int i;

	for (i = 0; i < ARRAY_SIZE(aspeed_silicon_revs); i++) {
	if (silicon_rev == aspeed_silicon_revs[i]) {
	return true;
	}
	}

	return false;
	}

	static void aspeed_scu_realize(DeviceState dev, Error *errp)
	{
	SysBusDevice *sbd = SYS_BUS_DEVICE(dev);
	AspeedSCUState *s = ASPEED_SCU(dev);

	if (!is_supported_silicon_rev(s->silicon_rev)) {
	error_setg(errp, "Unknown silicon revision: 0x%" PRIx32,
	s->silicon_rev);
	return;
	}

	memory_region_init_io(&s->iomem, OBJECT(s), &aspeed_scu_ops, s,
	TYPE_ASPEED_SCU, SCU_IO_REGION_SIZE);

	sysbus_init_mmio(sbd, &s->iomem);
	}

	static const VMStateDescription vmstate_aspeed_scu = {
	.name = "aspeed.scu",
	.version_id = 1,
	.minimum_version_id = 1,
	.fields = (VMStateField[]) {
	VMSTATE_UINT32_ARRAY(regs, AspeedSCUState, ASPEED_SCU_NR_REGS),
	VMSTATE_END_OF_LIST()
	}
	};

	static Property aspeed_scu_properties[] = {
	DEFINE_PROP_UINT32("silicon-rev", AspeedSCUState, silicon_rev, 0),
	DEFINE_PROP_UINT32("hw-strap1", AspeedSCUState, hw_strap1, 0),
	DEFINE_PROP_UINT32("hw-strap2", AspeedSCUState, hw_strap2, 0),
	DEFINE_PROP_END_OF_LIST(),
	};

	static void aspeed_scu_class_init(ObjectClass klass, void data)
	{
	DeviceClass *dc = DEVICE_CLASS(klass);
	dc->realize = aspeed_scu_realize;
	dc->reset = aspeed_scu_reset;
	dc->desc = "ASPEED System Control Unit";
	dc->vmsd = &vmstate_aspeed_scu;
	dc->props = aspeed_scu_properties;
	}

	static const TypeInfo aspeed_scu_info = {
	.name = TYPE_ASPEED_SCU,
	.parent = TYPE_SYS_BUS_DEVICE,
	.instance_size = sizeof(AspeedSCUState),
	.class_init = aspeed_scu_class_init,
	};

	static void aspeed_scu_register_types(void)
	{
	type_register_static(&aspeed_scu_info);
	}

	type_init(aspeed_scu_register_types);