hw/omap_uart.c

/*
 * TI OMAP processors UART emulation.
 *
 * Copyright (C) 2006-2008 Andrzej Zaborowski  <balrog@zabor.org>
 * Copyright (C) 2007-2009 Nokia Corporation
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation; either version 2 or
 * (at your option) version 3 of the License.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License along
 * with this program; if not, see <http://www.gnu.org/licenses/>.
 */
#include "qemu-char.h"
#include "hw.h"
#include "omap.h"
/* We use pc-style serial ports.  */
#include "pc.h"

/* UARTs */
struct omap_uart_s {
    target_phys_addr_t base;
    SerialState *serial; /* TODO */
    struct omap_target_agent_s *ta;
    omap_clk fclk;
    qemu_irq irq;

    uint8_t eblr;
    uint8_t syscontrol;
    uint8_t wkup;
    uint8_t cfps;
    uint8_t mdr[2];
    uint8_t scr;
    uint8_t clksel;
};

void omap_uart_reset(struct omap_uart_s *s)
{
    s->eblr = 0x00;
    s->syscontrol = 0;
    s->wkup = 0x3f;
    s->cfps = 0x69;
    s->clksel = 0;
}

struct omap_uart_s *omap_uart_init(target_phys_addr_t base,
                qemu_irq irq, omap_clk fclk, omap_clk iclk,
                qemu_irq txdma, qemu_irq rxdma,
                const char *label, CharDriverState *chr)
{
    struct omap_uart_s *s = (struct omap_uart_s *)
            qemu_mallocz(sizeof(struct omap_uart_s));

    s->base = base;
    s->fclk = fclk;
    s->irq = irq;
#ifdef TARGET_WORDS_BIGENDIAN
    s->serial = serial_mm_init(base, 2, irq, omap_clk_getrate(fclk)/16,
                               chr ?: qemu_chr_open(label, "null", NULL), 1,
                               1);
#else
    s->serial = serial_mm_init(base, 2, irq, omap_clk_getrate(fclk)/16,
                               chr ?: qemu_chr_open(label, "null", NULL), 1,
                               0);
#endif
    return s;
}

static uint32_t omap_uart_read(void *opaque, target_phys_addr_t addr)
{
    struct omap_uart_s *s = (struct omap_uart_s *) opaque;

    addr &= 0xff;
    switch (addr) {
    case 0x20:	/* MDR1 */
        return s->mdr[0];
    case 0x24:	/* MDR2 */
        return s->mdr[1];
    case 0x40:	/* SCR */
        return s->scr;
    case 0x44:	/* SSR */
        return 0x0;
    case 0x48:	/* EBLR (OMAP2) */
        return s->eblr;
    case 0x4C:	/* OSC_12M_SEL (OMAP1) */
        return s->clksel;
    case 0x50:	/* MVR */
        return 0x30;
    case 0x54:	/* SYSC (OMAP2) */
        return s->syscontrol;
    case 0x58:	/* SYSS (OMAP2) */
        return 1;
    case 0x5c:	/* WER (OMAP2) */
        return s->wkup;
    case 0x60:	/* CFPS (OMAP2) */
        return s->cfps;
    }

    OMAP_BAD_REG(addr);
    return 0;
}

static void omap_uart_write(void *opaque, target_phys_addr_t addr,
                uint32_t value)
{
    struct omap_uart_s *s = (struct omap_uart_s *) opaque;

    addr &= 0xff;
    switch (addr) {
    case 0x20:	/* MDR1 */
        s->mdr[0] = value & 0x7f;
        break;
    case 0x24:	/* MDR2 */
        s->mdr[1] = value & 0xff;
        break;
    case 0x40:	/* SCR */
        s->scr = value & 0xff;
        break;
    case 0x48:	/* EBLR (OMAP2) */
        s->eblr = value & 0xff;
        break;
    case 0x4C:	/* OSC_12M_SEL (OMAP1) */
        s->clksel = value & 1;
        break;
    case 0x44:	/* SSR */
    case 0x50:	/* MVR */
    case 0x58:	/* SYSS (OMAP2) */
        OMAP_RO_REG(addr);
        break;
    case 0x54:	/* SYSC (OMAP2) */
        s->syscontrol = value & 0x1d;
        if (value & 2)
            omap_uart_reset(s);
        break;
    case 0x5c:	/* WER (OMAP2) */
        s->wkup = value & 0x7f;
        break;
    case 0x60:	/* CFPS (OMAP2) */
        s->cfps = value & 0xff;
        break;
    default:
        OMAP_BAD_REG(addr);
    }
}

static CPUReadMemoryFunc * const omap_uart_readfn[] = {
    omap_uart_read,
    omap_uart_read,
    omap_badwidth_read8,
};

static CPUWriteMemoryFunc * const omap_uart_writefn[] = {
    omap_uart_write,
    omap_uart_write,
    omap_badwidth_write8,
};

struct omap_uart_s *omap2_uart_init(struct omap_target_agent_s *ta,
                qemu_irq irq, omap_clk fclk, omap_clk iclk,
                qemu_irq txdma, qemu_irq rxdma,
                const char *label, CharDriverState *chr)
{
    target_phys_addr_t base = omap_l4_attach(ta, 0, 0);
    struct omap_uart_s *s = omap_uart_init(base, irq,
                    fclk, iclk, txdma, rxdma, label, chr);
    int iomemtype = cpu_register_io_memory(omap_uart_readfn,
                    omap_uart_writefn, s);

    s->ta = ta;

    cpu_register_physical_memory(base + 0x20, 0x100, iomemtype);

    return s;
}

void omap_uart_attach(struct omap_uart_s *s, CharDriverState *chr)
{
    /* TODO: Should reuse or destroy current s->serial */
#ifdef TARGET_WORDS_BIGENDIAN
    s->serial = serial_mm_init(s->base, 2, s->irq,
                               omap_clk_getrate(s->fclk) / 16,
                               chr ?: qemu_chr_open("null", "null", NULL), 1,
                               1);
#else
    s->serial = serial_mm_init(s->base, 2, s->irq,
                               omap_clk_getrate(s->fclk) / 16,
                               chr ?: qemu_chr_open("null", "null", NULL), 1,
                               0);
#endif
}